How and how to lubricate the door hinges so that they do not creak. How to lubricate the door hinges so that they do not creak? The better to lubricate the hinges

Each mechanism, including door hingesrequire constant care. In most cases, this process boils down to the timely application of lubricant, which can save the hinges from squeaking. Why is there an unpleasant sound and how to lubricate the door hinges? Let's look at the problem in more detail.

Causes of squeaking hinges

First of all, you need to understand the causes of the squeak. The most likely problems include:

1. Incorrect initial setting of the hinges. Hinges creak will begin to occur from the first moments of door operation. If the hinges were welded before the door was installed (used on entrance, street and garage doors), then it is recommended to contact the company that installed the door with a request to fix the problem. It is quite difficult to eliminate the creak of the welded hinges on your own. To solve the problem, you will need to reinstall the hinges.

1. Contact between door cladding and hinges. The problem is eliminated by carefully adjusting the dimensions of the cladding to the installed hinges.
2. No special balls in the loop mechanism. To fix the problem, you need to remove door leaf, disassemble the hinges and equip them with the necessary elements. After that, assemble the hinge and install the door in its original place.

1. There is no lubricant for the hinges at all or the lubricant is not selected correctly. For example, some lubricants thicken when exposed to low temperatures. To eliminate the creak, you will need to apply a new, suitable in terms of parameters, grease.

Thus, almost all causes of a squeak can be solved independently.

Types of lubricants

Now let's consider how to lubricate the hinges so that they do not creak? All funds can be roughly divided into specialized and folk.

Specialized tools for eliminating squeaky hinges

In stores you can buy:

• universal product, for example, WD - 40. Grease for door hinges can be produced in the form of a spray (as shown) or oil. Such funds can be used in different conditions... They easily deal with the problem of squeaking, accumulated grease or rust. In addition, WD - 40 is able to protect the mechanism from corrosion;

• the simplest machine oil that can be purchased in large cans or specialized household bottles. The oils reliably protect the hinges from rust formation and promote correct operation;

• means used for the lubrication of machine units. For example, solid oil (can operate in the temperature range from -30 ° C to 65 ° C) or lithol, operating in the temperature range -40 ° C - + 120 ° C.

Folk recipes for lubricating door hinges

How to lubricate door hinges if there are no specialized compounds at hand? You can always find a folk remedy that will help eliminate the problem, albeit for a short time. Among the folk remedies are:

• vegetable oil is the best known lubricant for locks and hinges. Unlike universal remedies, vegetable oil has a short-term effect, but can be used to eliminate squeak. It is required to use the product carefully and in small quantities, as it quickly becomes dirty and gives the mechanism an unaesthetic appearance. After purchasing a specialized product, it is advisable to remove the vegetable oil, and lubricate the loop with the acquired composition;
• pencil lead. Possesses excellent lubricating properties. The lead must be carefully pulled out of the pencil, crushed and placed in a loop. After this procedure, it is required to open and close the door several times so that the substance disperses over the entire surface of the mechanism;
• lubrication of door hinges with warm wax or paraffin, also has a short-term effect, but can be used to eliminate unpleasant sound. The agent is applied to the hinge, after which the door is set in motion several times, which promotes the diffusion of wax inside the hinge.

Using scented candle wax is not recommended.

Thus, there are many remedies for removing squeaky hinges. For all doors, it is recommended to use universal products that can be purchased at hardware and automotive stores. They perfectly eliminate the problem and keep the hinges working for a long time. FROM folk remedies must be handled very carefully and carefully. If the hinges creak even after applying lubricant, then the problem is most likely in other aspects that need to be further clarified.

How to use specialized remedies to eliminate squeak

How to lubricate the hinges interior doors and what is required for this? Let's try to figure it out. First of all, you need to prepare:

• lubricant: oil, spray and so on;
• dry and clean cloth;
• device for removing the door. You can use an ax, crowbar, or other device that creates a lever.

If the hinges on the doors creak, then the following steps must be taken to eliminate it:

1. remove the door from its hinges. So that the procedure does not cause difficulties, the door leaf should be slightly raised with an ax or crowbar. In this position, the hinges will easily separate;

1. lubricant is carefully applied to all hinge elements located on the door leaf and frame;

1. the door is hinged;
2. several cycles of opening and closing are performed for a more even distribution of the lubricant over the hinge surface;
3. the remaining oil is removed with a dry cloth.

Now let's figure out how to eliminate the creak of universal-type hinges, that is, one-piece. To do this, grease is simply applied between the hinge joints without removing the door leaf.

For processing one-piece loops, it is more convenient to use sprays or aerosols.

What to do if the hinges are rusted and the door cannot be removed

After prolonged use of a hinge or several hinges that are used on the street, situations often arise when it is impossible to remove the door leaf. The hinge is covered with rust, which interferes with the normal operation of the mechanism and the disassembly of the device. In this situation, it is recommended to use rust dissolving agents.

When purchasing a spray or aerosol (as shown), the agent is sprayed onto the loop surface. If a liquid oil composition is chosen as a solvent, then a compress should be applied to the loop: the composition is applied to a rag that is applied to the loop.

It will take 3 to 6 hours for the softening compound to fully interact with the rust.

Under no circumstances should a rusted hinge be knocked down with a hammer or other device. This can damage both the hinge itself and the door.

Thus, there are a lot of means for lubricating door hinges and locks. The formulations can be purchased commercially. Door hinges should be lubricated regularly. This affects the duration of the mechanism.

A door that makes a creak is inconvenient, especially if it gets worse over time. Unpleasant sounds from the door appear due to the fact that the hinges are poorly lubricated or the original position of the installed door has changed. Such problems can be solved without difficulty.

The reasons for the squeak

An unpleasant rattling sound is heard when the front doors are in action, open or close. Sometimes squeaking occurs when the blade comes into contact with the floor surface or door frame... To more accurately determine where the creak is coming from, move the flaps. There are four reasons for the squeak that professionals identify.

1. During the execution of the structure, mistakes were made: the hinges were attached incorrectly. This problem is solved by rearranging the hinges. But it is better not to undertake this work on your own, since the functioning of the valves in the future depends on its results.
2. The facing material of the web is in contact with the hinges. To remove the squeak, the cladding is carefully removed and adjusted to the desired dimensions.
3. No balls in the hinge design. To correct the situation, the hinges are removed from the door leaf and the missing elements are put in - special balls.
4. There is not enough lubricant or the selected lubricant is not suitable for the properties.

How to lubricate the hinges?

• sewing machine oil;
• car engine oil;
• ciatim;
• grease;
• special substance WD-40;
• soft graphite rod.

To use the latter option, the doors are raised and small pieces of graphite are placed in the hinges. When the doors are in place, this substance will turn into powder. graphite is a reliable tool in the fight against "musical" flaps. Some owners try to eliminate sounds by using vegetable oil. But as the professionals say, this is not worth doing. At first it will remove the creak, but after a while the grease will become dark, solid, which will lead to a bad appearance fittings, and it will have to be changed.

How to lubricate

If you perform this procedure yourself, you must first open the doors with hidden hinges. For this, dry rags, an ax and a lubricant are prepared in advance. An ax is installed under the lower part of the open sash in order to, acting as a lever, raise the canvas up.

If you follow this process correctly, it is not difficult to remove the door from the hinges. Then the awnings are carefully examined. The rods must be firmly attached to the web and the recesses must be on the box. Apply the lubricant directly to the rods, but add a small amount to the grooves.

After that, using the ax again, the sash is set on the hinges. If excess lubricant has come out on the sheds, they are immediately wiped off with a dry cloth. After the first attempt, the door structure stops making a creak if everything is done correctly.

If the door squeaks strongly, and this has been happening for a long time, then one procedure cannot be done. Most often suffer from this metal constructionsthat are on the street. In this case, the formed oxide or rust is initially removed from the hinges. The prepared rags are moistened in a prepared product: machine oil or WD-40 and placed on the canopies that are covered with rust. This should be done carefully so that the substance does not spread and fall on the canvas. It will not be possible to remove old rust in a few minutes. Let the soaked rags lie in this position for at least 5 hours. Then check the condition of the awnings. Sometimes the allotted time is enough to eliminate the cause. But if this does not happen, the procedure is repeated.

To prevent squeaking and remove oxide from awnings wooden doors, it is better not to bring it to this. Regular lubrication is carried out using a pharmacy pipette or, if available, an oiler.

If the door that makes a creak is equipped with a grease gun, you must first drill a through hole with a small diameter and make a thread. Then screw the grease gun into the hole made in order to supply a lubricant through it that will remove the squeak.

It is clear that immediately after the doors began to creak, it is not necessary to call the master, you can cope on your own.

How to adjust the sash so that it doesn't squeak

The task of adjusting the door has to be solved both immediately after installation and during the period of further operation.

In the first case, it is important to establish the structure evenly, and in the second case, to find the cause of the squeak and eliminate it. Possible reasons the appearance of a creak over time:

• the door sank;
• the hinges are clogged;
• there is an uneven or too tight seal;
• the lock is not secured evenly.

If the reason was the subsidence of the hinges due to the large weight of the door structure, then high-quality adjustment will help with this.

To do this, loosen the upper loop and pull the lower one to raise them up, if you want to lower them, then the action is performed the other way around. To loosen the hinge, manufacturers provide minor clearances that allow it to move to the side. The screws on the hinge are loosened, and then one of them is tightened well and they try to move the door, opening and closing it. When it is possible to find the ideal position, the sash will move without effort and squeak, tighten the rest of the bolts.

Clogging of the hinges on the metal door, which is installed in the apartment, is due to the collected repair dust. In this case, the door creaks, and blowing out the moving mechanism with a compressor will help get rid of this. Then the hinges are lubricated with machine oil.

Important! Regardless of whether there is a creak in the doors or not, it should periodically be used for prevention.

If the reason for the squeak was an uneven or unsuitable sealant installed by the manufacturer, then the door will be tightly closed anyway. Only the installed canvas is left for a while to allow the seals to sink a little. But if the door has been used for a long time, then it is better to replace the sealing element with a new one.

The problem of an unevenly installed lock occurs in low-quality and inexpensive designs. For the lock to close well, you need to cut the hole where the tongue enters. Some models have a special plate for adjusting the density of the porch. It is located in the recess for the tongue entrance.

The main thing is to make the adjustment in time, since a poorly fixed sash will disable the lock or jam.

How to eliminate the creak of the door, shown in the video:

The creak of the door is terribly unpleasant. ... But eliminating the squeak is easy enough. You just need to lubricate the hinges. Today we will tell you about 4 fast and effective ways fight against the creak of door hinges.

1 way. Aerosol WD
This tool is in the car of any motorist. A multi-purpose white spirit grease with a convenient dispenser can help prevent squeaks. However, the effect will not last long. The fact is that the product is not intended for lubrication, it helps to clean and dehydrate the surface before applying real lubricant. WD contains oil, but its not more than 20% of the total aerosol composition.

2 way. Machine oil
Any oil that is used to lubricate car parts is suitable here. Choose with the highest viscosity. Engine oil is ideal, and if you find a lubricant called "Litol", you will forget about the creak in the door hinges for a long time.

A regular syringe or pipette can be used to apply the oil. Liberally lubricate all moving parts of the hinge and wipe off excess with a dry cloth. Before oiling, clean the surface well with WD aerosol

Method 3. Pencil
Our grandmothers did not have WD, Litol and other joys of civilization, so they used a simple pencil lead. It can be crumbled and poured into the slots of the hinges, or the door can be lifted and a piece inside the mechanism can be crumbled with a loop. The lead contains oil and wax, so it can really get rid of the squeak.

Method 4. Liquid soap, wax, or sunflower oil
If nothing of the above is at hand, then use the means at hand. Any liquid and viscous product is suitable here. But remember that using sunflower oil can lead to the adhesion of dust and dirt on the hinges, and this will subsequently lead to rapid wear of the mechanism. And the effect of such treatment will be short-lived.

Here they are - the saviors from the noose creak

Squeaky door hinges annoy everyone. They can creak for various reasons. This can be both the presence of rust on their surface, and general wear of parts. Often, in order to get rid of the annoying squeak, it is enough to simply lubricate the hinges, and for this it is not at all necessary to remove the door leaf. There are ways to do this without resorting to radical methods.

If the interior or front door in the apartment began to creak, then there are reasons for this. As a rule, this happens when the door structure is in motion, that is, it opens or closes.

To find out exactly what exactly creaks: the hinges or the canvas itself, you need to slowly move the door back and forth, tightly holding the handle and listening to the sounds emitted.

Why does the door creak and how to eliminate these reasons:

1. There are errors when hanging the door leaf - for example, the hinges are incorrectly installed. To solve this problem, you need to reinstall the door or call the masters who will quickly and efficiently do this work.
2. The door lining touches the hinges - to eliminate this cause, you just need to remove the lining and make it the right size.
3. There are not enough balls in the door hinges - in this case, they must be put in the necessary places.
4. The hinges are simply loosely fixed - it is worth tightening them well.
5. Sagging of the canvas has begun - such a problem can affect, first of all, a plastic door. To remove it, you need to adjust the top or bottom eyelet, depending on the area of \u200b\u200bsagging.
6. The ends of the door leaf touch the platbands - in this case, the fastening grooves should be deepened.
7. The fasteners of the door structure have not been lubricated for a long time - here it is enough to simply perform this action;
8. Rust has appeared - this problem mainly concerns the iron door. Here it is necessary to clean the loops from plaque and only then lubricate them. If the corrosion has managed to penetrate deeply into the material, then the loops will have to be replaced.
9. Incorrectly selected lubricant - in this case, you need to remove the old product and apply a new one.
10. The hinges have already become very loose and their service life has come to an end - here it only remains to replace them.

These are the main reasons for the terrible squeak of the door. But basically it's all about the lack of lubricant on the hinges. Therefore, you should figure out what is the best way to lubricate them.

Tips: how to lubricate door hinges so that they do not creak

If the door squeaks due to unlubricated hinges, the correct lubricant will help solve the problem.

The better to lubricate the hinges of interior door leaves:

• Sewing machine oil;
• Machine oil used for a car engine;
• Diesel oil;
• Tsiatimom - perfectly removes not only squeak, but also protects parts from corrosion and the effects of aggressive components;
• A special agent WD-40 - in addition to the usual lubricant, this substance is excellent at fighting rust, and you can buy it at any auto parts store.

Cannot be lubricated creaky door vegetable or olive oil. This gives, firstly, a short-term effect, and secondly, it causes the formation of excess plaque on the fittings, and as a result it will have to be changed.

An excellent homemade way to lubricate a door is to use a soft pencil lead. This is very simple to do - just put the lead on the hinges and move the door a little in different directions. The material will crumble and fall on all loops.

If the front door of the house creaks, then it is better to lubricate it with substances such as:

• Litol - this grease is not afraid of frost and can withstand the temperature range from -40 to +120 degrees;
• Solid oil - pretty cheap remedycapable of acting in temperature conditions from -35 to +65 degrees.

If the front door leads to the vestibule or staircase, where the positive temperature is constantly maintained, then you can use ordinary engine oil or WD-40.

To prevent the hinges from creaking, they need to be coated with special grease. Moreover, sometimes this needs to be done without removing the door leaf from the hinges.

In the case of a plastic door, it looks like this:

• A syringe is taken, filled with oil for lubrication and the substance is applied to the fittings;
• If a pencil lead is used instead of lubricant, then the door must be slightly raised so that the slots into which the agent is poured are visible.

If a plastic door leads to the balcony, then you need to start lubrication from its side. In this case, the door must be open.

Instructions: how to lubricate the hinges of an iron door

A creaking iron or metal door must be lubricated. If the parts of the door structure are non-separable, then you will have to do this without removing the structure.

A metal door is lubricated like this:

• The door leaf opens wide open;
• Further, it rises a little (for these purposes, you need to put something under the end of the door, for example, a thick file);
• After that, old grease and accumulated dirt are removed from the fittings;
• Then the lubricant can be applied with a cotton swab, brush, syringe, or using an oil can with a nozzle;
• After completing all the procedures, the door is removed from the "lever" and moves several times in different directions so that the product is evenly distributed over the hinges;
• Excess substance must be removed with a dry cloth.

During lubrication, more substance should be applied to the upper hinges, since the main load during door operation falls on them.

If the hinges are a hidden mechanism, then you need to find all its pivoting parts and lubricate. Sometimes there are special holes for filling oil.

Tips: how to lubricate door hinges without removing the door (video)

The main reason for a door squeak in a room is the lack of grease on the door hinges. Naturally, to remove this problem, you need to lubricate them. In order not to remove the canvas, you can use more in a simple way and do all the necessary actions with the help of assistive devices. The main thing is not to forget about security measures.

Car door creaking is not the most serious problem a motorist can face, but extremely unpleasant. If the driver constantly has to listen to the door hinges creak when getting into and out of the car, this is clearly not a normal situation. It is easy to get rid of such a nuisance if the door hinges are lubricated. Let's consider how to do this, as well as which lubricant is better to choose.

Table of contents:

How to lubricate car door hinges

Apply grease to the car door hinges, preferably as soon as possible after unpleasant squeaks appear during their movement. Squeaking occurs due to increased friction between the planes of the hinge, respectively, increased friction leads to increased wear, which can be avoided if lubricated in a timely manner. If you ignore this problem, over time, the door can "askew", which will lead to difficulties in closing it.

Lubricating car door hinges is not as easy as it might seem at first glance. In this case, it is required not only to apply a lubricant component to the working mechanism. It is important to properly prepare the surface before this. Proceed according to the following algorithm:

1. First clean the lubricated surface from the formed dirt. This can be done using, for example, a brush with coarse bristles. Since, in most cases, the dirt is "ingrained", you can use white spirit or gasoline to dissolve it. If there are traces of corrosion, use a rust converter;
2. When the surface is clean and dry, use a lubricant. We recommend not just "pouring" the hinges, but lubricating the rubbing surfaces specifically;
3. After lubrication, open and close the door 20-25 times, wiping off excess grease leaking during operation with a cloth.

If, after the hinges are lubricated, the creak persists, this may be due to the subsidence of the doors, poor-quality lubrication, poor cleaning of the surfaces, or due to the fact that not all the hinges are lubricated.

Please note: It is better to lubricate car door hinges in the autumn, when the heat has already ended, but the cold has not yet come.

What lubricant to choose for car door hinges

Greases are best suited to lubricate the hinges. This is due to the fact that such funds have:

• Excellent penetrating ability, which allows them to "break through" deep into the loop;
• Long service life. Even when the lubricant evaporates, it remains on the film surfaces, which prevent squeaking and additionally protect the surfaces from friction;
• Ability not to lose properties when working in a different temperature range;
• Minimum coefficient of friction;
• Additional anti-corrosion properties arising from additives;
• Low price.

Important: Drivers often lubricate car door hinges with a known liquidWD40. Such actions will not lead to a positive result.

If no composite lubricant is available, or can be used. But it is important to note that their effectiveness will be significantly lower. Lithol is a very "sticky" lubricant that attracts dust, sand, dirt and other debris that can harm rubbing surfaces. As for the engine oil, its effects will not last long.

Another type of lubricant that may work for car door hinges is silicone based options. But it is better that the silicone is not the basis of the lubricant, but part of the multi-component product. The problem with silicone-based lubricants is that they wash out quickly and lose their properties at high temperatures.

Common lubricants for car door hinges

Consider several lubrication complexes that are often chosen for car door hinges:

This is just a small part of the lubrication complexes that can be used to lubricate car door hinges. In specialized automotive stores, you can find a wide range of similar lubricants.

Sections of the article:

The creak of a door when opening or closing is a rather annoying factor, which is a consequence of such reasons as the appearance of rust on the surface of the hinges or their wear during operation. Grease usually helps to get rid of the squeak. How to lubricate door hinges without removing the door - we will tell you in our material.

Reasons for the door creak

An entrance or interior door can start to squeak depending on many reasons, the most common are:

• Lack of lubrication inside the canopy, which appears during long-term operation, as it evaporates and thickens;
• Poor installation of the door structure or an insufficient number of hinges that are unable to withstand a heavy canvas. If a creak and distortion is found immediately after installation, it is enough to adjust the door. If the problem is ignored, the application of forces when opening / closing the skewed door, not only the canopies are damaged, but also the stability of the frame is reduced;
• Regular ingress of moisture on the entrance doors unprotected by a visor provokes the appearance of corrosive processes, the result of which is a creak, crunch, reduced friction of the mechanism and difficult movement of the sash;
• The use of low-quality or unsuitable lubricants, on which small particles of dirt, dust adhere, which clog the mechanism. Subsequently, the solid particles inside the lubricant become abrasive, destroying the metal of the canopy with each movement of the blade;
• Contact of the finishing coating of the door and awnings;
• Long service life and low-quality metal of the hinges lead to wear of the components of the mechanism, which will need to be replaced with a new one.

What can be used as a hinge lubricant

There are many tools for lubricating door hinges, as well as tips for their use. Some lubricants have a short-term effect, some can disrupt the operation of awnings, so how not to make a mistake when choosing? First, let's look at how you can lubricate the loops.

This versatile type of grease is found in the garage or trunk of a car for every other driver. Preference should be given to viscous oils, for example, for the engine or diesel.

Household sewing machine oil

The indisputable advantages of such a tool are its availability (sold in any household department) and the form - small bottles of 30 or 50 ml with a thin spout, which can easily be applied to the depth of the door hardware.

You should not replace the engine oil with an analogue of organic origin (olive, vegetable, butter or petroleum jelly), since the organic matter quickly evaporates in the air, so the loops will begin to creak again in the near future. As it dries, the organic lubricant becomes sticky, which gets small particles of dirt and dust, which impede the operation of the mechanism. In addition, organic matter provokes the appearance of rust on the hinge, which, in combination with an indelible sticky layer, increases the likelihood of replacing with new fittings.

WD-40

Such a lubricant eliminates the squeaking of awnings in a few minutes. Convenient form in liquid or aerosol form allows you to apply the product without additional equipment at hand. WD-40 not only lubricates the canopy, but also cleans dirt and dissolves rust. But it is worth noting that WD-40 dries quickly, without constant renewal, forming a coating that does not allow parts of the mechanism to slip easily. As a result, in the future you will have to remove the canvas, disassemble, clean the hinges and select a more suitable lubricant.

It is considered the most effective long-lasting lubricant, but unfortunately, you will have to search diligently in stores for such a lubricant.

Affordable analogue of graphite grease, characterized by long-term action for several years. Suitable for outdoor entrance doors, as the grease is resistant to frost and temperature extremes.

A thick lubricant commonly used to make the door awnings of private houses work. Fittings, lubricated with lithol, will not creak at temperatures from -40 to + 120 ° C, which allows using the product in harsh weather conditions and boiler rooms. Litol can be replaced with low-cost solid oil, which retains its viscosity at air temperatures from -35 to + 65 ° C.

Due to the high viscosity of such products, it is recommended to disassemble the hinges and lubricate from the inside, in which case the door will not bother with a creak for many years. If you do not want or cannot remove the canvas, you can thoroughly smear the surface and the joint of the loop with lithol using a cotton swab or tampon, but it should be borne in mind that the period of silent operation will significantly decrease.

Graphite

The shaft of a simple, soft pencil is considered effective and affordable option elimination of squeak. It is not necessary to grind the rod into powder in order to rub the canopy joint later, it is enough to slightly raise the door leaf so that the hinge rod slightly protrudes from the second part and put a piece of graphite there. Several movements of the door and the rod in the hinge is crushed into crumbs under the weight of the canvas.

Before lubricating the door hinges, check their surface for contamination, which can be removed with a dry cloth slightly dampened with solvent. If the hinges are rusted, you must first remove the rust. suitable means... Spray anti-corrosive agent allows you to clean the hinges without removing the canvas. If the rust remover is in liquid or oily form, soak a rayon cloth and apply to the awning like a compress. Typically, rust dissolves within 2-6 hours, depending on the thickness of the plaque and the characteristics of the product, after which it is removed with a dry cloth.

Please note that rusted hinges must not be knocked down with a hammer or crowbar, as after such treatment the mechanism will be damaged and will not be suitable for normal operation.

For convenience, you will need a small container and a medical syringe without a needle. A small amount of lubricant will be poured into the first, and the second allows the agent to be dosed into the gap between the loop components.

It is recommended to apply grease with a high viscosity with a cotton swab, stick or brush, while slightly lifting the canvas with the lever to form a slightly larger gap between the halves of the loop. The same tools will be needed in the presence of universal non-separable hinges.

The hinge is more thoroughly processed in that part of the sash where the squeak is more observed. Usually, this part of the fabric or loop is frayed. The inside of the canopy is also carefully lubricated, since it is here that all the rubbing components of the hinge are located.

Excess grease is removed with a dry, clean cloth or cloth.

How often to lubricate awnings

To ensure that the door opens / closes easily and does not creak, lubricate the hinges every 5-6 months. But since in practice this is not always done, you can understand that it is time to lubricate the hinges of interior doors without removing the canvas by the following signs:

• The door leaf opens with difficulty, resisting at the point of attachment to the frame;
• Door movement is accompanied by unpleasant sounds, crunching or squeaking;
• The leaf is saggy, hangs unevenly, closes with force or gets stuck in the door frame.

If you find one of the signs, then it is strongly recommended to clean the surface of the hinges from dirt, and in some cases, rust, and then lubricate with a suitable agent.

A syringe can be used to lubricate the door hinges.Squeaky door hinges annoy everyone. They can creak for various reasons. This can be both the presence of rust on their surface, and general wear of parts. Often, in order to get rid of the annoying squeak, it is enough to simply lubricate the hinges, and for this it is not at all necessary to remove the door leaf. There are ways to do this without resorting to radical methods.

If the door in the room creaks: what to do and why it happens

If the interior or front door in the apartment began to creak, then there are reasons for this. As a rule, this happens when the door structure is in motion, that is, it opens or closes.

To find out exactly what exactly creaks: the hinges or the canvas itself, you need to slowly move the door back and forth, tightly holding the handle and listening to the sounds emitted.

Hinge lubricants can be purchased at any hardware store

Why does the door creak and how to eliminate these reasons:

1. There are errors when hanging the door leaf - for example, the hinges are incorrectly installed. To solve this problem, you need to reinstall the door or call the masters who will quickly and efficiently do this work.
2. The door lining touches the hinges - to eliminate this cause, you just need to remove the lining and make it the right size.
3. There are not enough balls in the door hinges - in this case, they must be put in the necessary places.
4. The hinges are simply loosely fixed - it is worth tightening them well.
5. Sagging of the canvas has begun - such a problem can affect, first of all, a plastic door. To remove it, you need to adjust the top or bottom eyelet, depending on the area of \u200b\u200bsagging.
6. The ends of the door leaf touch the platbands - in this case, the fastening grooves should be deepened.
7. The fasteners of the door structure have not been lubricated for a long time - here it is enough to simply perform this action;
8. Rust has appeared - this problem mainly concerns the iron door. Here it is necessary to clean the loops from plaque and only then lubricate them. If the corrosion has managed to penetrate deeply into the material, then the loops will have to be replaced.
9. Incorrectly selected lubricant - in this case, you need to remove the old product and apply a new one.
10. The hinges have already become very loose and their service life has come to an end - here it only remains to replace them.

These are the main reasons for the terrible squeak of the door. But basically it's all about the lack of lubricant on the hinges. Therefore, you should figure out what is the best way to lubricate them.

If the door squeaks due to unlubricated hinges, the correct lubricant will help solve the problem.

An excellent low-cost solution is to lubricate the hinges with the WD-40

The better to lubricate the hinges of interior door leaves:

• Sewing machine oil;
• Machine oil used for a car engine;
• Diesel oil;
• Tsiatimom - perfectly removes not only squeak, but also protects parts from corrosion and the effects of aggressive components;
• A special agent WD-40 - in addition to the usual lubricant, this substance is excellent at fighting rust, and you can buy it at any auto parts store.

Do not grease the squeaky door with vegetable or olive oil. This gives, firstly, a short-term effect, and secondly, it causes the formation of excess plaque on the fittings, and as a result it will have to be changed.

An excellent homemade way to lubricate a door is to use a soft pencil lead. This is very simple to do - just put the lead on the hinges and move the door a little in different directions. The material will crumble and fall on all loops.

If the front door of the house creaks, then it is better to lubricate it with substances such as:

• Litol - this grease is not afraid of frost and can withstand the temperature range from -40 to +120 degrees;
• Solidol is a fairly cheap tool that can act in temperature conditions from -35 to +65 degrees.

If the front door leads to the vestibule or staircase, where the positive temperature is constantly maintained, then you can use ordinary engine oil or WD-40.

To prevent the hinges from creaking, they need to be coated with special grease. Moreover, sometimes this needs to be done without removing the door leaf from the hinges.

Before you start lubricating the hinges of plastic doors, it is worth watching a training video

In the case of a plastic door, it looks like this:

• A syringe is taken, filled with oil for lubrication and the substance is applied to the fittings;
• If a pencil lead is used instead of lubricant, then the door must be slightly raised so that the slots into which the agent is poured are visible.

If the plastic door leads to the balcony, then it is necessary to start lubrication from its side. In this case, the door must be open.

Instructions: how to lubricate the hinges of an iron door

A creaking iron or metal door must be lubricated. If the parts of the door structure are non-separable, then you will have to do this without removing the structure.

A metal door is lubricated like this:

• The door leaf opens wide open;
• Further, it rises a little (for these purposes, you need to put something under the end of the door, for example, a thick file);
• After that, old grease and accumulated dirt are removed from the fittings;
• Then the lubricant can be applied with a cotton swab, brush, syringe, or using an oil can with a nozzle;
• After completing all the procedures, the door is removed from the "lever" and moves several times in different directions so that the product is evenly distributed over the hinges;
• Excess substance must be removed with a dry cloth.

Before lubricating the hinges iron doors they must be thoroughly cleaned of debris and old grease

During lubrication, more substance should be applied to the upper hinges, since the main load during door operation falls on them.

If the hinges are a hidden mechanism, then you need to find all its pivoting parts and lubricate. Sometimes there are special holes for filling oil.

Tips: how to lubricate door hinges without removing the door (video)

The main reason for a door squeak in a room is the lack of grease on the door hinges. Naturally, to remove this problem, you need to lubricate them. In order not to remove the canvas, you can use a simpler method and do all the necessary actions with the help of auxiliary devices. The main thing is not to forget about security measures.

The first thing that comes to mind when an annoying sound appears is that the hardware is not properly lubricated. Most often it is. In the second part of the article, we will definitely tell you how to lubricate the hinges so that they do not disturb your peace. Unfortunately, this does not always solve the problem. The reasons for the squeak may differ from mechanism to mechanism. Let's consider each of them separately.

How to fix creaking doors:

Why do the doors in the apartment creak and what to do about it

Interroom

In the room, problems most often arise for the following reasons.

• No bearings in the hinges. Remove the sash, insert the balls and put everything back.
• Offsets. This happens when the house shrinks or just over time in any apartment.
• Loosely fixed fittings.

The last cause can be eliminated simply by tightening the nuts. If the holes are loose, use one of the following methods.

• Self-tapping screws 12 cm with a cap suitable size... Screw them through the jamb so they fit into the wall.
• Self-tapping screws 5 or 7.5 cm, screwed in at a slight angle (less than 20 °).
• Plugs made of wood. Cut out the plugs to a suitable size, coat them with a little wood glue and carefully hammer into the jamb. Cut off the excess and use a thin drill to make holes for the screws.
• Oversized screws, dowels and dowels, greased with adhesive.

Be careful when driving dowels. The wood on the box may crack. To prevent this from happening, lightly tap the plugs with a hammer until the glue comes out from the surface. Everything else can be cut.

Input

First, about what can be done when the metal creaks and why it happens.

• Incorrect installation. In this case, you will immediately notice the problem. Contact the team that did the job.
• Debris in the hinges or rust. Usually such a canvas not only creaks, but also difficult to open and close. You need to blow through the parts with a hairdryer and lubricate them. In the worst case, remove the structure, clean it and apply lubricant. Rust must also be removed first - this can be done with WD-40 spray.
• Sagging and displacement of the web. As in the case of interior doors, traces of friction will be visible at the end.

Working with an eccentric

If there is an eccentric - a special mechanism for adjusting the closing density - use it. The video shows what this part looks like and how to use it.

Another solution to the problem is for a sagging canvas.

Work without eccentric

When there is no eccentric, the task becomes a little more difficult. The sequence of actions in this case will be as follows:

• Using a Phillips screwdriver, loosen the middle 1-2 hinges and the one that is closest to the place of friction (a creaking sound is heard near it and there are scuffs).
• Gently slide the flap towards you and slide back towards the box.
• Tighten the adjusting nut on the outermost hinge.
• Slightly shake the canvas so that the hinges fall into place, screw them on.
• Open and close the sash several times. If the creak persists, repeat everything a second time.

And one more instruction - for plastic canvases. Problems with PVC sash usually arise from the fact that it is not adjusted.

Balcony

So, your plastic creaks, what should you do in this case? In addition to lack of lubrication, the structure can creak for several reasons:

• Poor hinge attachment. You just need to fix them.
• Sagging or displacement of the sash. This happens when it is often opened and closed.
• Poor quality or worn out fittings.

In the latter case, the problem can be solved only by replacing the parts, but you can align the canvas yourself. To do this, you need a regular hexagon. Watch the video from detailed instructions for adjusting the PVC structure. If it was installed a long time ago, pre-lubricate the fittings. More about this in the next part of the article.

How and how to lubricate the door so that the hinges do not creak

You can often find advice to use vegetable or olive oil for lubrication. Better not to. Nothing terrible will happen, but there will be no effect either. The next day or a little later, the squeak will appear again, as the oil will quickly become dirty and lose its properties.

Another "popular" way to eliminate an unpleasant sound - pieces of pencil lead. They contain wax and therefore can become a lubricant. The lead must be crumbled and placed under the hinges. You can mix it with any oil. This method is often used for plastic balconies. As a temporary measure, liquid soap, wax or paraffin from a candle (they must first be melted) are suitable.

The best hinge lubricants

They can be sold in special tubes or regular containers. In the first case, applying the product is very simple. In the second, you can use a regular syringe. Thick products are applied with a wooden or cotton swab.

• "Solidol". Does not lose its properties at low temperatures and therefore is suitable for metal doors in a private house.
• "Litol". Has the same characteristics as solid oil.
• "Tsiatim". Not only lubricates parts, but also prevents rust.
• WD-40. Aerosol with anti-corrosion effect. It's easy to use - there is a spray tube included.
• Graphite grease. It practically does not lose its properties over time. It is often recommended by masters.
• Silicone Grease. Also resistant to low and high temperatures, easy to apply.
• Sewing machine oil.
• Machine oil for engines.

This is not all that can be used to lubricate the hinges if the door creaks. Stores sell dirt-repellent, cleaning, anti-corrosive liquids and aerosols in convenient packaging.

How to lubricate hinges without removing them

The sequence of actions is the same for almost all mechanisms. You will need a lever, a wedge, a lubricant tool, and a clean rag. Sometimes a rust remover.

It is desirable that the selected oil or spray has a packaging with a long spout for application. But you can do without it. Usually, one or two drops of liquid are enough to remove the squeak. It is not recommended to lubricate the fittings with your hands - you can get injured if you suddenly close it from a draft or carelessness. However, the wedge solves this problem.

• Open the sash wide open and put something under it. In order not to spoil flooring - Place a soft cloth on it.
• Use the lever to slightly raise the blade.
• Clean the parts, apply grease to them. Erase the excess.
• Remove the wedge, open and close the doors several times to distribute the product evenly.

Note. On PVC, in addition to fastening fittings, the lining on it, the lining from the closer are also cleaned. The rubbing elements of the closer must be treated with oil. It is recommended to do the same with the clamping parts.

If after that the problem persists and the hinges are collapsible, try to remove the entire structure or pull the rod out of the hinge and lubricate it inside. The rod is the middle element in the mechanism. Sometimes it can be removed with your fingers, but more often you will need pliers.

Accessories that cannot be disassembled or hidden can only be treated with oil. If this does not help, the cause of the problem may be different or the parts are worn out and need to be replaced.

How to lubricate double-sided hinges

• Open the sash wide open.
• Fill or spray inside with oil from a thin tube or syringe. Usually in such mechanisms there are special holes in the rod for this.
• Rock the blade to distribute the liquid to all elements.

What to do with the creak of a sliding structure

In this case, the reason lies in the guide or castors. The guide just needs to be cleaned, but the wheels will have to be disassembled.

• Remove the rollers.
• Disassemble them to see the bearings.
• Treat with any product and collect back.

Summarize. What to do if a door creaks in a room or apartment? Most often, you just need to lubricate the fittings. But it happens that the problem lies elsewhere. To determine what is wrong, open and close the room several times, listening carefully to the sound source. If there are scuffs at the end or you are having difficulty closing the sash, it may be due to the curvature of the canvas in relation to the box.

An entrance from the street or repairs can cause contamination of the hinge - the structure will not close well. Well, the most unpleasant option is to change the entire mechanism. To prevent this from happening as long as possible, the masters advise to carry out preventive lubrication and cleaning of parts.

• Prepared by: Nelly Kirgintseva

It will be useful for every owner to know how and how to lubricate the doors. When a comfortable silence in a home is disturbed by an unpleasant piercing creak emanating from the movement of the door leaf, one feels negative emotions and unpleasant sensations arise. Irritation builds up if you can't quickly fix it by making the door mechanism soundless.

The reasons for the squeak

No one is immune from the appearance of a door squeak. Hardware needs not only correct installation, but also in periodic adjustment, lubrication. If the door starts to make a sound while moving, you should first find the cause of this phenomenon. And there may be several of them:

The lubricant should be checked and options for its absence should be excluded, namely: drying, thickening, spreading. In its absence or insufficient quantity, the fittings, being overwritten, first stop working correctly, and then completely fail.

A squeak can be caused by corrosion. Rust slowly but surely eats up the metal door leaf, making it difficult to move. Noticing her, you need to lubricate front door special anti-corrosion agent.

It is worth looking at the details, analyzing the degree of their wear and tear.

Often debris, dust gets into the hinges and, being heavily soiled, the structure begins to creak. All dirt should be removed before lubricating interior door hinges.

If the creak appeared as a result of a lack of lubrication or debris turned out to be the cause, for many it becomes an urgent question how to lubricate the door so that it does not creak.

Lubrication options

It doesn't matter, or, hinges, mechanisms periodically require attention and care. To do this, it is not superfluous to have a special jar with a product on the farm that will help find the answer to the question of how to lubricate the door and fittings. It could be Solidol, Tsiatim. If it is necessary to lubricate the input door structure or a wicket, universal means are suitable: Litol (frost-resistant, water-resistant) or WD 40 (universal remedy that fights rust, corrosion).

Alternatives for lubrication

If there is no special tool in the household, then in search of an answer how to lubricate the door hinges, you can find an alternative. Motorists always have old, once drained engine oil. It is perfect for lubricating hinges and locks.

Usually for those who sew or do needlework using sewing machine, there is also a full oiler in the bins. It is convenient to apply this oil, it is perfect for door hinges.

In cases where there is nothing to lubricate the hinges with, you can use ordinary vegetable oil. True, such a lubricant will not last long.

How to lubricate fittings with oil

There are several rules in how to lubricate door hardware with oil.

It is convenient to work with a special oil can. It can be replaced with a medical syringe.

The disassembled fittings are lubricated with a brush or cotton swab wound on a long skewer or tweezers.

After lubricating with a napkin, remove excess oil.

When choosing how to lubricate the door leaf, its accessories, it is best to use high-quality thick products. It is important for prevention purposes to do this regularly.