Why is the ceiling in the bathroom made of panels so good and how to install it yourself: a special case for an apartment. Aluminum bathroom ceilings - a beautiful and practical solution How to install an aluminum bathroom ceiling

The suspended structure in the bathroom performs a whole range of technical functions: it masks defects in the ceiling surface, serves as an excellent frame for built-in lighting, and allows you to create a unique project in your favorite style.

Professionals can easily cope with both drywall and tensile structures, while amateurs should start with more simple option: independently install a slatted ceiling in the bathroom - quickly and at no extra cost.

The prototype of modern plastic and aluminum panels is the usual wooden lining, which is still used for wall and ceiling cladding.

Narrow long slats of various lengths are easy to install, so they are often used for finishing cottages, utility rooms, cellars, attics.

With the advent of lighter and decorative panels from plastic, the choice of decoration has expanded suspended structures- the most suitable for renovation of bathrooms, bathrooms and kitchens.

Thanks to the versatility of plastic, slatted ceilings have become a godsend for decorating the ceiling in the bathroom. Their advantages are undeniable: inexpensive cost, quick installation, diverse design, prompt repair

According to the material of manufacture, all popular panels that our supermarkets offer are divided into plastic and aluminum. PVC slats have a standard length of 2.5 m - 3 m - 4 m (there are also 6-meter parts, but they will not be required for typical bathrooms), but they differ in width.

Panels 25-30 cm wide after installation look like a continuous coating, as they do not have pronounced borders or inserts. We will dwell in more detail on elements that outwardly resemble narrow slats, that is, they have a width of 85 mm, 100 mm and 150 mm.

Aluminum slats are resistant to water splashes and temperature extremes, and their diverse design - from traditional white coating to bright gilding - allows you to realize fantastic projects.

Reiki differ not only in size, but also in shape. Among the builders there are "their" divisions into categories.

For example, elements with right angles and a clear configuration are usually called German, with rounded edges - Italian, and unusual ones, characterized by a complex shape and additional installation difficulties - design.

Here are some decorative plastic panels:

Elements with soft, rounded corners, the length of the main parts and inserts - 3 m or 4 m, perforated options are possible (hole diameter - 1.5 mm)

V-shaped decorative elements that play the role of inserts between the main, background details. Possible colors: white, gold, silver matte or glossy, chrome

Decorative cube-shaped inserts that fill gaps in an open ceiling. The color of the inserts (gold, silver, chrome, white) is selected in contrast with the main background

When choosing certain details, it is necessary to focus on wall cladding, furniture color, lighting features and make sure that the design of the rails does not contradict the chosen style.

Do-it-yourself slatted ceiling: detailed photo installation instructions

Consider how to quickly install a rack ceiling in the bathroom, using a minimum of inexpensive parts. This manual is useful for beginners to get acquainted with the details of suspended structures.

The installation procedure is the same, regardless of the use of aluminum, steel or plastic parts.

Selecting the point in time to install the structure

Do not forget that the construction of a false ceiling is just one of the stages of bathroom renovation, therefore, it is necessary to determine in advance its place among other works.

Most often, construction activities are moving in the direction from the bottom up, that is, first I lay the floor, then the walls are tiled, and finally the suspended structure is erected. This is the most correct and logically explainable order.

The installation of traverses and the assembly of rails is a quick and “clean” process compared to, say, wall decoration with porcelain stoneware. There is practically no dirt and debris, and the most difficult event is the precise installation of the perimeter and the installation of suspensions.

Do not forget that in parallel with the installation of suspension elements, it is necessary to carry out installation work lighting fixtures– spotlights, chandeliers or hidden lighting

Finishing ceiling work allows you to adjust the height of the walls, mask the flaws in their decoration. For example, a small gap between the tile and the ceiling is easy to cover with a suspended structure.

And here it would not be out of place to recall another advantage of the rack ceiling: it can always be done without prior preparation, simply by setting the profile and “typing” required amount panels.

Simply put, this a budget option a ceiling that can be erected or dismantled at any stage of the construction process.

We will provide instructions for the construction of the rack ceiling white color. If desired, it can be decorated with colored inserts, install spotlights or use slats of a different size.

Preparatory stage - materials and tools

First of all, you will need tools for marking, since correctly measured distances and intervals are a guarantee of a beautiful result. So, you need:

marker;
square;
roulette;
building cord (optional);
level (preferably laser).

With the help of these simple devices, you can carry out all the preliminary work. The first step will be the installation of a guide profile, which will run along the perimeter of the entire room, so it is important to calculate the height of the future structure.

The tip can be the top one. ceramic tile, and its edge is a kind of landmark.

The laser level is necessary at any stage repair work in the bathroom, especially when marking. With its help lay tiles, cladding panels, mount suspended structures of various types

If there are plastic panels or a layer of plaster on the walls, then you will have to count from the floor. Why not from the ceiling?

The fact is that in some houses the ceiling slabs lie unevenly, and if you focus on them, you can make a design with a slope - this shortcoming will immediately catch your eye.

In addition to marking tools, you will need scissors (or a construction knife), a drill (perforator), a screwdriver, a screwdriver. Plastic is easy to cut construction knife.

But if you chose aluminum panels, you will have to get special metal scissors. As you can see, there are few tools.

Metal shears can be useful for cutting aluminum panels, steel rails and other metal parts, including decorative corners and inserts

List of required materials:

ceiling panels - slats made of plastic or aluminum with a width of 85 to 150 mm;
guide metal profile;
traverses (bearing tires for attaching rails) and suspensions for them;
decorative plinth;
fasteners (dowels, screws).

If the width of the bathroom is only one and a half meters, then it makes sense to purchase 3-meter parts, divide them in half and choose a “transverse” design.

For a large room, respectively, we buy 4, less often - 6-meter panels. If you want to decorate the ceiling with decorative inserts, consider their width when purchasing the main details.

The calculation of the supporting profile is as follows: if the length of the bathroom does not exceed 2.5 m, then 2 rows are enough, that is, a maximum of 5 m. Knowing the number and length of the tires, we calculate purely suspensions - with a light ceiling, 2-3 suspensions for each bus.

When buying a kit of parts, take care of spare parts that may come in handy for the next repair.

Installation of guides around the perimeter

Suppose we measured the height of the flow and marked the line along which the guides of all four sides will pass. The distance to the ceiling is from 10 to 20 cm.

It is impossible below, since the room will look cramped, they are also not recommended above to leave room for technical maneuvers - lighting system devices. Before installation, we check the accuracy of measurements with a level.

We cut the carrier profile into segments equal to the length of the sides using metal scissors.

We apply each segment with the wide side to the intended line, drill holes right through the metal, fix it with screws with dowels. The distance between the holes is approximately 40 cm

If we put the profile on top of the tile, make sure that the marks do not fall on the junction of two tiles. In this case, it is better to use not a puncher for drilling, but a drill and a special drill for ceramics.

We place the guides alternately on all the walls, inserting one profile into the other at the corner joints. When installing each new segment, we use a laser level - any distortion will be noticeable after the general installation

The result should be a smooth frame encircling the entire room. It will serve as a support for the installation of rails and perform a decorative function.

Installation of suspensions and traverses

We fix the hangers (perforated metal plates on which the tires will be mounted) on the stream by drilling recesses for the dowels in its surface.

We hammer the dowels into specially designed holes with a hammer, then insert 2 screws each and tighten them with a screwdriver or screwdriver.

When the suspensions are firmly fixed, we bend both ends of each of them down. Between the ends there will be traverses - load-bearing tires, the basis for installing panels

We take the tires, bring them to the hangers and securely fasten them with screws at the required height. We bend the remaining free ends of the hangers up so that they do not interfere with the fastening of the rails.

At correct installation the ends of the traverses should almost touch the opposite walls and be above the supporting profile. The position of each fixed part is checked with a level

It happens that the tire is not enough for the entire length of the room. In this case, it must be increased. At the end of the installed traverse, we mount another suspension, bring the missing segment end-to-end and fix the structure.

On this, the draft work is completed, it remains to assemble the ceiling, laying out the slats according to the planned project (along, across, diagonally, combined).

Ceiling Assembly

We take out the rails from the packages, remove the protective film. Up to this point, it is not recommended to unpack plastic or aluminum panels so as not to inadvertently damage the edges or the top decorative layer.

We cut segments along the length or width of the room.

We take the slats one by one and insert them one by one with the ends into the guide wall profile, and snap the central part onto the traverse (on which special teeth are intended for this)

The last rail does not always fit in width, sometimes it needs to be trimmed. We snap the last detail - the ceiling is ready.

In our case, the ceiling is of a closed type, that is, the panels fit snugly against each other, forming an integral coating, without gaps. If the plans complicate the installation with decorative elements, then gaps should remain between the rails - along the width of the inserts. We install decorative inserts together with the main ones, alternating them

It remains to complete the installation of the lighting system.

Installation of fixtures

We are not interested in mounting the chandelier, as it does not fit well with the slatted ceiling. The most simple and the best option is a set of spotlights. Their location can be any:

along the perimeter of the room;
along long walls;
diagonally;
over work areas;
in a checkerboard pattern, etc.

In fact, the lion's share of the system is prepared in advance. Even before attaching the rails, it is necessary to lay the wiring, bring it to the fixing points of the fixtures, and cut holes in the panels to size.

In this case, after mounting the ceiling, it remains to fix the lamps and screw in the lamps.

Best for baths LED bulbs that don't heat up ceiling surface, save energy and give light close to natural light

The appearance of the lamp can be anything, but it must match the color of the panels and match the style of the room.

The most popular models - products round shape silver or gold, but there are hundreds original lamps, decorated with rhinestones, Czech glass, colored shades or pendants.

Design secrets of slatted ceilings

Having decided to build a slatted ceiling in the bathroom or in the toilet with your own hands, consider its design even before starting work. You can achieve an incredible effect, given the texture or location of the rails.

The simplest option, which can be called universal, is white panels without inserts and patterns, with built-in lights. It is suitable for the bathroom classical style or in any modern version.

The main advantage of white glossy and matte slats is their excellent compatibility with the whole gamut of colors and textures. All shades of white are in harmony with both pastel wall cladding and dark tiles.

The black ceiling with narrow inserts of the same color looks presentable, especially against the background of chrome accessories and shiny plumbing.

Be careful with black slats. Do not forget that dark tones narrow the space, and the black ceiling, accordingly, visually reduces the height of the walls. For the opposite effect, use reflective gloss or mirror inserts.

Popular slatted ceiling with silver or gold accents. It has two advantages: it enhances the decorative possibilities of panels of any color and fits well into environments filled with chrome details.

Try not to mix gold and silver in the interior of the bathroom or use them in large quantities: the colors lose their appeal, become too catchy, attract all the attention. Light silver or gold decor, on the contrary, looks elegant and appropriate.

If you have sufficient skill in the installation of suspended structures, you can experiment and create a complex combined structure, playing with the texture and arrangement of rails of different colors.

One of the design rules concerns moderation in the use of bright colors or shiny details. If the ceiling in the bathroom is too expressive, try to minimize the decoration of the walls.

Finally - one of the options for installing a combined suspended structure.

Installing a slatted ceiling in a bathroom, kitchen, or other high-humidity environment is a very smart decision, as no other finish will prove to be as durable in such conditions.

In addition, the suspended structure will have a perfectly flat surface and will allow you to place stylish built-in lights.

We invite the reader to get acquainted with the technology of installing a rack ceiling in the bathroom, which, as he can see, is not difficult even for a beginner.

First of all, you need to decide what the ceiling will be.

Aluminum slats are available in quite a variety of designs:

Color. A wide range is available - from the usual matte white to golden.
Form.
Size.
Presence of perforation. Provides ventilation of the space between the rails and the floor slab.

Three types of rails are distinguished by shape:

classic rectangular shape without rounding (they are called "German");
with rounded corners (Italian "");
with a special shape ("designer"): usually somewhat more difficult to install.

The length of the rails (the standard row is 2.5, 3, 4 and 6 m) must be chosen taking into account the dimensions of the bathroom so that there are as few scraps as possible.

Aluminum rack dropped ceilings

According to the width of the panel are divided into:

wide (25 - 30 cm): do not have visually delimiting elements, so the ceiling surface looks solid;
narrow (85, 100, 150 mm): have clearly defined edges, so that the boundaries of each rail are clearly visible after installation.

In addition, a variety of inserts can be installed between the narrow rails, which make the design of the structure more spectacular.

If aluminum slats seem too expensive, more affordable steel or PVC panels can be purchased.

What is required for installation?

In addition to the rails, the master will need some more elements, as well as tools. But first you need to answer the question: when exactly to start installation?

Selecting the point in time to install the structure

A positive feature of the rack ceiling is that its installation does not apply to either “wet” processes or dirty ones in general. Therefore, you can deal with its device at the very end of the repair epic.

This tactic is quite consistent with the generally accepted order of internal finishing works: usually start from the floor and move from the bottom up, ending with the ceiling.

Necessary materials and tools

In addition to the panels you will need to purchase:

guides (metal strips with a special profile);
traverses (elements to which the rails will be attached);
suspensions for traverses (in the amount of 2 - 3 for each traverse);
dowels and screws.

The total length of the traverses is determined based on the fact that they will be installed in increments of 1 - 1.2 m.

All materials, as always, should be purchased with some margin: you will need it if some elements are accidentally damaged during installation, as well as in case of replacing damaged elements in the future.

You also need to take care of the availability of such tools:

level: it is better to take not a bubble one, but a water one (two glass tubes connected by a long rubber one);
marking tool: marker, cord;
perforator;
screwdriver or screwdriver;
construction knife (if PVC panels are used);
metal scissors;
roulette.

By the beginning of installation in the subceiling space, wires must be laid out to power the fixtures. They must be laid in pipes or corrugated hoses made of metal or self-extinguishing plastic (PUE requirement).

Installation of guides around the perimeter

Work begins with attaching guides to the walls, which will simultaneously serve as decorative frame ceiling cloth. All of them should be located:

strictly horizontal;
at a distance of about 10 cm from the floor slab.

The second point is advisory in nature: 10 cm is the optimal value, which will not greatly reduce the height of the room and at the same time allow you to easily place all the electrics and lamps.

If necessary, it can be adjusted in any direction.

How to achieve a strictly horizontal position of the guides? It does not make sense to set aside equal distances from the main ceiling - there is no guarantee that the slab itself lies strictly in a horizontal plane. You can "dance" from the floor, as it is always level.

But the most reliable way is to make marks with a water level. The use of this tool eliminates any error that would occur when plotting distances with a tape measure or using laser level bubble type.

We connect the marks made with straight lines, beaten off with a stretched cord, after which we fasten the guides along them with dowels (with the wide side). The fastener installation step is 40 cm.

Scheme of rack ceiling mounting

If the rails are mounted on top of the tile, it is highly desirable to avoid getting the mounting holes in the seams between the tiles. If this still had to be faced, the hole needs to be drilled special drill for ceramics and without perforation mode.

If the metal bar needs to be cut, this can be done with metal scissors.

In the corners, the guides are inserted one into the other.

Among suspended ceiling systems, they are chosen because of the relative ease of installation and the aesthetic appearance of the structure.

You can read about how to properly whitewash the ceiling in the bathroom.

Drywall - a material from which you can create an interesting decorative ceiling in the bathroom. You can read about the features of plasterboard ceilings.

Installation of suspensions and traverses

This stage of installation of the aluminum ceiling is carried out in the following order:

On the floor slab we beat off straight lines perpendicular to the direction of the rails in the future suspended ceiling. The distance between the lines is 1 - 1.2 m, at the same distance the first and last of them should be separated from the nearest walls. This is the markup for installing traverses.
Along each line, we evenly install 2 - 3 hangers, screwing them to the floor slab with two dowels. Having fixed the suspension, both of its “legs” must be bent down.
Between the upper edges of the guides facing each other, previously screwed to the walls, we stretch a cord or thread to indicate a horizontal plane.
We install the traverses, placing them between the "legs" of the suspensions at the desired height and screwing them to them with self-tapping screws. Traverses should lie along the plane indicated by the stretched threads. Thus, they will be above the guides installed around the perimeter of the room. In length, each traverse should be almost from wall to wall (leave small gaps). It can be made up of several short strips, fixing each of them on their own suspensions and fastening them together.

We bend the ends of the "legs" of the hangers below the traverses up (they would interfere with the installation of rails).

Ceiling Assembly

So, let's look at how to assemble and mount a rack ceiling. The sequence of actions is as follows:

The protective film is removed from the rails. This should be done at the last moment in order to exclude damage due to careless actions of the edges or decorative coating.
Cut off with a construction knife (PVC rails) or metal scissors (aluminum) a fragment of the desired length.
If a lamp will be installed in this panel, a round hole must be cut out in it: a circle is drawn, several small holes are drilled along it. The gaps between the holes are cut, after which the edge of the resulting round hole is ground.
The prepared rail is inserted with both ends into the guide profiles on opposite walls, and in the middle part it snaps to the traverses (they are equipped with special teeth).

Visual diagram of the rack ceiling

Other rails and inserts are installed similarly, if provided, only last rail will need to be cut to the required width.

Installation of fixtures

The lamps are fixed in the holes made under them, after which the lamps are screwed into them.

Light sources can be placed in different ways:

along the walls around the perimeter;
along only long walls;
over the entire surface of the ceiling in a checkerboard pattern;
asymmetrically with a concentration above the working areas.

In the case of PVC panels, the lamps should not emit too much heat.

Plastic panel ceilings have excellent moisture resistance, so they are widely used in bathroom decoration. read on our website.

You will find tips for installing a false ceiling in the bathroom.

In a damp room, for safety reasons, it is recommended to install a low-voltage lighting system, which requires a voltage of 12 or 24 V. It is also more economical. Some halogen lamps are designed for such power, as well as new generation lamps - LEDs. The latter are characterized by particularly low power consumption and a significant resource.

Aluminum slatted ceilings

The aluminum ceiling for the bathroom combines all the advantages of both wood and plastic materials. From the tree, he took the ecological cleanliness and strength of the resulting product. From PVC - resistance to rotting, ease of maintenance and lack of finishing.

But, in addition, there are some advantages that are peculiar only to aluminum rack systems, and the main one is ease of installation. You can assemble such a set even without special training. The principle of installation is intuitive and does not require any special skills from the performer.

The only disadvantage of aluminum ceilings is their market price, which ranges from 1000 to 1700 rubles per square meter.

Peculiarity

Despite the resistance of aluminum itself to moisture falling on it, the coating of the rails does not always have such high-quality stability characteristics. That is why in bathrooms it is still necessary to think over and design the ventilation system of the room with high quality even before the installation of the substructure of the aluminum slatted bathroom ceiling.

Colors and textures

When choosing an aluminum ceiling in the bathroom, one cannot but pay attention to the richness of the choice of textures and colors of similar products provided on the construction market.

The most widespread textures are mat and gloss. They are trying to compete with the mirror and metallic that come into fashion.

ADVICE
When choosing a texture, you should take into account the size and geometry of the bathroom, as well as the overall design of the room. So mirror ceiling has every chance to expand the boundaries of the room, but only spruce will not reflect black and gloomy walls.

As for the colors, in addition to the traditional tones and shades that cover the entire range of the visible spectrum, there are also ready-made textures such as Mirage, Safari, Northern Lights, Karelian Birch and many, many others. Designers. working for the largest manufacturers of aluminum ceilings do not sit idle, and therefore every season new and interesting textures come out.

Why is there aluminum in the bathtub?

As a result, to all of the above, I would like to say that aluminum slatted ceilings are simply created specifically for bathrooms and bathrooms. Good hydro and wear resistance, excellent aesthetic appearance, easy operation, good biostability. It is these qualities, like no other, that are important when arranging rooms with high humidity.

And if you remember that the bathrooms have never been famous for their huge area, then the significant cost of the rack products used in them will not play a decisive role.

If you still doubt whether you need an aluminum ceiling in the bathroom, look carefully at the photos of rotten and suffocated ceiling sheets made from other slatted materials.

Fully meets these requirements aluminum - easy to install and easy to operate. Do not think that this is a material used mainly in the design of industrial premises. The following collection of photos of aluminum ceilings in the interior of the bathroom will show that such a coating can look beautiful, stylish and modern.

Features of aluminum ceilings

Aluminum ceilings are very diverse appearance and installation type. Let's take a look in more detail:

Cassette ceiling- These are square or rectangular panels of various colors and textures. They are mounted on an open or hidden profile frame system. You can read more about the installation of such structures here.
Slatted aluminum ceilings- longitudinal flat beams, which are installed on a special frame.
cube panels- a kind of rack, which differ in the volume of the structure.
Freeform designer panels, depending on the configuration of the room and your preferences. Developed on an individual project.

All types of aluminum coating have common advantages, which are the reason for their popularity:

The main property that matters for the bathroom is moisture resistance. Aluminum ceilings do not deteriorate and do not rust under the influence of water drops and steam.
Durability. If properly installed, an aluminum structure will last you for decades - or until you want to make repairs.
Ease of maintenance: It is enough to periodically wipe the ceiling with a damp cloth. Do not know how to wash them in case of severe contamination? It's simple, any non-abrasive detergent.
Variety of shapes and colors which allow you to choose a coating for the type of interior (we will look at it in more detail below);
Aluminum is a lightweight material, so you do not need a complex frame;
Ecological cleanliness and absence of harmful impurities;
Complete incombustibility;
The suspended structure will hide the draft ceiling, wires, ventilation.
Affordable price - they are noticeably cheaper than stretch and plasterboard ceilings;
Easy assembly and dismantling, which you can do on your own.

The disadvantages include a slight decrease in the height of the walls (a common minus of all suspended structures). In addition, if one section is damaged, it will not be possible to replace only it - you will have to partially dismantle the entire coating. However, these inconveniences are redeemed by a large number of advantages.

As you can see The use of aluminum panel ceilings in the bathroom is justified not only from an aesthetic point of view, but also from a functional one.

Aluminum ceilings in the interior

The range of modern hardware stores allows you to choose an aluminum suspended ceiling for a bathroom of any color and texture, including even mirror designs.

If you have little idea how such a coating looks in the interior, we offer you to look at our extensive photo selection.

IN last years are popular aluminum bunk ceilings. True, it must be taken into account that they require an appropriate height of the walls - at least 2.5 meters. Otherwise, the bathroom will seem too low and cramped.

They are mounted on a frame similar to that used for plasterboard structures. Such a ceiling is well suited for spacious bathrooms where zoning is necessary - you can select a utility area with washing machine, shower or bath.

Looks good for this design. combination of two colors- separate for each level. One of fashionable combinations a combination of gold and silver plating is considered an elegant, but not too catchy option.

By the way, modern aluminum ceilings are not always designed as metal. You can choose slats with a coating of any color- for example, beige, as in our example. Thus, the aluminum coating can fit into any interior, even a classic one.

Another popular design method is a combination of rails of two textures. For example, painted matte and shiny metallic. The main thing here is to make sure that the color of the paint matches the overall style of the room.

If the room is decorated in bright colors, it may be justified to use mirrored aluminum ceiling. It will reflect the design of the walls and floor, making the bathroom noticeably higher. A good solution for small rooms with low walls. True, in this case, you will have to carefully monitor the order - any shortcoming will be much more noticeable.

Unusual, but stylish reception - several perpendicular beams from painted rails. They will make the ceiling brighter, add color and help decorate the room. Choose colors carefully - if they do not harmonize with the main design, the ceiling may seem too colorful and flashy.

If in a private house you decide to place a bathroom in the attic, you will like the option sloped wavy ceiling. It looks very impressive and beautiful, does not differ in particular complexity of installation.

True, you need to take into account the height of the walls - this design requires more space than a standard flat one. However, the result is justified - such a ceiling is striking and can be considered a self-sufficient decoration that does not require additional decor.

If you order wavy slats with a blue coating, the ceiling will look like a seething sea - beautiful and unusual, isn't it? Yes, and in the theme of the bathroom, such a solution fits perfectly.

Another design option is a combination of dark and light slats. Good way zone the space for a low room without hiding the height.

An interesting take: You can achieve color diversity not only by spraying or painting. Hidden lighting with LED strips will make the ceiling more voluminous. Try to choose the tone of the LEDs that matches the shade of the walls or plumbing. So you get an unusual room with a holistic interior.

Cassette ceilings are no less diverse than rack ceilings. In addition, they are faster to install and easier to operate: for example, you do not need to dismantle the entire coating to get to hidden communications or replace a couple of elements.

Aluminum ceiling with unusual lighting imitating the starry sky - custom solution. More often for such installations, a stretch fabric is used, however modern technologies allowed to bypass this limitation. You will need led strip and tiny spotlights that mount directly into the cassette.

Undoubtedly, such lighting requires a certain amount of labor, time and money - such a ceiling costs much more than simple analogues. However, the result will exceed all your expectations.

Unusual perforated cassettes suitable for a spacious room. True, in this case you will have to take care of the cleanliness of the frame and ceilings - not too beautiful if you can see clouds of dust or cracks in the rough finish through the holes.

Mirror aluminum ceiling- quite a bold decision. Not everyone will agree to a huge mirror for the entire floor area. However, the result is worth it - beautiful, original. In addition, such a coating visually enlarges the bathroom, and it is easy to care for it - wash the panels with a standard glass cleaner and a soft, lint-free sponge.

The combination of a black and white cassette ceiling with golden decorative inserts is a classic technique that will work well for a bathroom. Cassettes of this kind are quite simply mounted and look spectacular, but they require an appropriate interior - it is better to consult a designer.

Can be ordered ceiling cassettes with a pattern applied to them- painted or embossed. Such ceilings look very elegant. They will decorate the bath, decorated in any style - from modern hi-tech to discreet classics. The main thing is to choose the right drawing.

For the price, they will cost not much more than ordinary high-quality cassettes.

Don't like the monochromatic design? Now you can easily purchase a cassette aluminum ceiling of any color. For example, it looks stylish in the interior combination of black and red plates. It is better to make them matte - this way water stains will be less noticeable, so cleaning will be needed less often.

Look good and rectangular cassettes, especially for a narrow bath. Laid perpendicular to a long wall, they visually expand the room. Want to add height too? Choose mirror coating - it will be able to “raise” the ceiling and the room will look much more spacious.

Unusual solution - white cassettes with red diamonds in the corners. True, during installation, you will have to be careful so that all the figures clearly converge. In addition, make sure that there are no wide seams - otherwise the pattern will be broken.

However, the result is worth it - original design that will enliven the interior of the bathroom.

As you can see, aluminum ceilings can be very versatile and suit almost any style of bathroom. We hope that some of our ideas will find practical use in your house.

Slatted ceilings for the bathroom - installation of such a design is not the easiest process.

But if you take the matter seriously and act according to the instructions, then it is quite possible to do this.

Much in this regard depends on the size and shape of your room. Naturally, the simpler the form, the easier it is. In ideally rectangular or square rooms, there should be no questions about installing a slatted ceiling.

If you feel that you are not able to cope with this task, call a team of specialists, since at the moment there are quite a large number of them.

But we suggest that you try to install a slatted ceiling in the bathroom with your own hands, because this will significantly save your money.

Where to start installation?

It is worth starting, of course, with measurement.

If in doubt about the quality of an independent measurement, you can always call a measurer. The cost of his services fluctuates around 500 rubles.

Of course, it's worth it, because in the end we need a normal rack ceiling in the bathroom.

Instructions of this kind correct installation there are a lot of slatted ceilings, but most of them are just a blurry description from which nothing can be learned.

In this article, we want to dwell on certain points in more detail and explain certain subtleties when installing a rack ceiling.

If you are going to repaint the ceiling in the bathroom, then it is enough to apply one layer of enamel.

Advice! If you want to make the ceiling "mirror", then choose a chrome aluminum ceiling for the bathroom.

Important! Any ceiling must be sold in a protective film. Do not trust manufacturers whose ceilings are sold without this very film.

Have you decided to buy a rack ceiling and want to calculate the cost?

Remember: the price of the ceiling includes: tire, suspension, plinth, well, the slats themselves.

A tire is a bar with teeth. It is for them that the slats cling. Carefully select tires for rails - certain types of tires do not fit all rails. Now, let's figure out what a suspension is.
Suspension is a wire attached to concrete ceiling. Tires with rails are attached to this suspension. In fact, because of this, such a ceiling is sometimes called a suspended ceiling. Quality hangers are adjustable in height.
The last part is the plinth. The plinth plays a purely decorative role. It closes the gap between the wall and the ceiling, in general, it plays the same role as a regular skirting board.
Don't forget the lights if you need them. There are situations when people remember lighting fixtures only after installing a slatted ceiling.

Slatted ceilings in the bathroom have a large price range, so look and experiment.

Ceiling installation

If you decide to do it yourself, then be 100 percent sure of success.

Do-it-yourself slatted ceiling in the bathroom begins with the markings mentioned above. Then you need to fix all the wires, otherwise they will interfere with your further work.

And now we provide you with step-by-step instructions.

Remember that any installation of a rack ceiling in the bathroom begins with the attachment of load-bearing profiles (stringers). They are fixed with screws and dowels.
We install end profiles around the perimeter of the room. It is very easy to do this, since they do not require fastening directly to the wall itself.
Now the most thrilling moment. Remove the protective film from the rails. If you wanted ceiling lights, then pre-cut holes of the required size.
We hang the rail on the stringers. That's all! Our rack ceiling in the bathroom is ready!

Many are afraid not of the installation process, but of the process of repairing such if necessary.

First of all, even during installation, try not to deform the rails, as they are quite easy to deform.

If a dent or scratch appears after, then it is enough to change one panel, leaving the ceiling safe and sound.

The ceiling in the bathroom is slatted - this is a wonderful and strong ceiling, in every sense of the word, you can put it in almost any room. Modern manufacturers are increasingly focusing on models designed primarily for decoration.

The ceiling deservedly received worthy attention, due to its versatility, easy installation, and most importantly - strength and excellent protective qualities, such as the absence of ignition and rust protection, since aluminum does not rust. Accordingly, in addition to baths, it can be used in places where Fire safety above all.

And finally, think about it, can you afford to lose a few centimeters due to such a ceiling? Perhaps you are not so high without it, but the rack ceiling is minus 5-10 centimeters. But at the same time, their usefulness remains so great that some people are not stopped by the height restriction.

Bottom line: slatted suspended ceilings for the bathroom certainly have many advantages, so it is worth considering purchasing this beautiful and reliable ceiling.