Fly bait into the device. Homemade flycatcher - how to make a fly trap with your own hands. Drosophila differences from other midges

Flies are the most common and annoying insects that live side by side with humans. Getting rid of them sometimes becomes a real problem, while often you cannot do without special means, one of which is a fly trap. Of course, you can buy it, but it's easy to do it yourself.

Is it necessary to fight flies and why

These insects are not only annoying with their buzzing - their neighborhood is much more dangerous than it might seem. Flies are carriers of pathogens of various diseases - intestinal infections, eye diseases, tuberculosis. Also, on their paws, they often carry eggs of worms onto the food they sit on. That is why the fight against them in the premises is an important task for ensuring sanitation and maintaining human health.

The main types of traps, their effectiveness, advantages and disadvantages

One of the most versatile means of exterminating unwanted neighbors is a fly trap. With your own hand, you can make many options for its execution from scrap materials.

The simplest one is from a plastic bottle with a sweet bait (it also helps against wasps)

Trapped out plastic bottle

Ease of manufacture is its main advantage. This requires one empty plastic bottle with a volume of 1.5–2 liters.

In order to make a trap, you must:

The disadvantage of this flycatcher is that a small part of the insects can leave the trap; you also need to constantly change the bait with the caught flies. Fermented bait can smell unpleasant.

Glass jar option

The principle of catching a flycatcher from glass jars the same as in the bottle version.

It is made as follows:

1. Put fruit in a jar with a volume of 0.5 to 3 liters or pour a sugar-containing liquid.
2. Insert the narrow end of the funnel for pouring the liquid into the neck of the can and secure it with tape.
3. Place a trap where you want to catch insects.

The effectiveness of this flycatcher is comparable to that of a bottle trap. It is periodically necessary to change the bait and remove the caught insects.

Analog from any container and cling film

For the manufacture of this flycatcher is used plastic container any shape - round or square. The trap is done as follows:

The principle of the trap is the same as in the previous ones. Some flies can escape the trap, and its effectiveness will depend on how attractive the bait is to the insects.

Homemade sticky tape

The advantage of this trap is that the flies do not need to get inside. closed space, which scares some insects, so its effectiveness is higher than that of the previous options presented. You can do it yourself as follows:

1. Mix 2 parts pine resin with 1 part linseed oil and a little sugar syrup.
2. Cut strips 3-4 cm wide from plastic wrap.
3. Apply the prepared adhesive mixture with a brush to the tapes.
4. Hang up traps in a room where you want to kill insects.

One of the disadvantages of adhesive tapes is their low aesthetics.

"Folk" insect repellents - plastic bags with water

A simple, albeit somewhat controversial, fly protection solution. In order to make such a repeller, you need the following:

The inventor claims that this device can be compared in efficiency with mosquito nets, but this is a rather controversial issue.

CD Velcro pendant

To make this trap, you need the following:

The disadvantage of this flycatcher is that it is periodically necessary to clean the disc from flies, lubricate it with an adhesive base and send it to the freezer.

How to make an electric fly trap

To make this category of traps, you need to have electrical skills. In addition, you need to have a list necessary materials, which will not be in every home.

Electric jump: instructions for making

The principle of operation of this electric trap is based on the belief that flies will fly to the light of the lamp, however, even professional flycatchers using lamps to lure them are more effective against mosquitoes, while flies, according to users, often bypass the trap.

To make this flycatcher, you will need the following materials and tools:

• Pliers;
• Screwdriver;
• Metal scissors;
• A small electric motor from the turntable;
• An ordinary light bulb with a socket;
• A pair of cans with different diameters;
• Aluminum or tin strip 20x100 mm in size;
• 2 plastic washers;
• Epoxy resin with a thickener;
• Metallic stripes;
• Screws and bolts M4;
• Round base made of wood;
• Nylon stocking;
• Rubber ring;
• The power source is a pair of AA batteries.

As you can see, this device is not the latest invention, but also a Soviet one.

You need to make a trap as follows:

The disadvantage of this trap is the complexity of its manufacture and low efficiency for catching flies in comparison with other traps.

Flycatcher-electroshock

To lure insects, this flycatcher also uses the light of a lamp, which in practice is far from always effective against flies. To make it, you will need the following materials:

• Housekeeper light;
• Ordinary penlight battery or "Krona".
• High voltage module.
• Aluminum wire.

An electric shock is made as follows:

1. Disassemble the housekeeper light and drill two holes opposite each other on the sides of the plastic base.
2. Insert aluminum wire into each hole and wrap the body with it.
3. Connect one of the wires that come out of the neon lamp with the end of the wire.
4. Connect the remaining two contacts of the neon lamp to the high-voltage module.
5. Connect the high-voltage module to the batteries via a push-button.
6. Fix the module and batteries to the lamp housing with electrical tape.
7. Switch on the device - insects attracted by the light when touched aluminum wire will be amazed electric shock.

The disadvantage of this trap is that it is also unsafe for humans if, through carelessness, touching a bare wire, it also has a low efficiency in comparison with traps in which sugar-containing substances or pheromones are used as bait.

Plants that eat for flies

Predatory plants are quite an exotic way of catching flies, but they are still able to help get rid of a few annoying insects. Most often in indoor conditions the following species are grown:

Industrial traps for rooms and gardens

There are also industrial versions of fly traps.

• Aeroxon. Glue trap, which contains environmentally friendly ingredients.
  
• DELUX AKL-31. A trap, the principle of which is based on attracting insects with ultraviolet light. Flies flying up to it are shocked. Although the manufacturer positions it as a universal device against mosquitoes, mosquitoes and flies, the latter rarely become trophies of this trap.
  
• FC001. A mechanical trap, inside which it is necessary to insert a tablet with an attractive substance, which contains synthesized (Z) -9-Tricosin, a pheromone secreted by flies to attract individuals of the opposite sex during mating. The action of the pill is very long - 2-3 pills may be enough for one season.
  

Professional traps vary in cost and outperform homemade traps in convenience and efficiency.

The prettiest option is the Australian bollard trap

This trap can be used outdoors - for example, near a dining table under a canopy in the country, since its catching ability is quite high, and maintenance actions are extremely rare.

Outwardly, the flycatcher looks like a bedside table from timber frame with small legs, covered with a fine mesh on all sides, under the bottom of which a saucer with a sugar-containing liquid is placed. The secret of catching flies lies in the pyramidal shape of the mesh bottom of the trap, in which there is a hole. As a rule, when they are full, the flies fly up, not paying attention to the transparent mesh.... As a result, insects enter the flytrap through a hole in the bottom.

The following materials are required for manufacturing:

The flycatcher manufacturing process is as follows:

1. Assemble the frame from wooden planks so that the whole structure stands on legs about 5 cm high, attach the upper part to the awnings and equip it with a crochet.
   
2. Cover all sides except the bottom with a metal mesh.
3. Make a pyramidal bottom of the trap from the mesh by connecting the seams of the mesh with self-tapping screws for metal; you can also use staples for a furniture stapler for this.
4. Cut a hole 2 cm in diameter at the top of the pyramidal bottom so that flies can enter the trap through it.
5. Coat all joints between the mesh and the wooden planks with sealant.
   
6. Place the trap in the required place, after placing a saucer with a luring liquid - sugar syrup or jam - under it. Commercial fly attractants can also be used.
   

The advantages of this flycatcher are that it is a rather rare service, since sometimes you only need to free the flies from the trap, and also replace the luring liquid in the saucer.

Prevention of flies in the house

In order for flies not to annoy, it is necessary to constantly adhere to preventive measures to prevent their appearance:

By taking these preventive measures, you can significantly reduce the number of annoying insects. It is also recommended to set up traps even in areas where the number of insects is low.

Various methods can be used to combat them, including traps, which have the following advantages:

However, there are some disadvantages to using traps, the main ones are:

1. Low efficacy compared to using insecticides, which allow you to virtually instantly destroy entire populations.
2. Lack of protective effect. Only those individuals that fall into the traps set will be destroyed.
3. It is necessary to wait for the moment when the fly will pay attention to the trap and fall into it, while some other methods allow you to immediately go to the destruction of pests.

Types of traps

The classification of such devices is carried out according to the principle of their operation today, in accordance with this criterion, the following varieties can be distinguished:

1. Glue traps are one of the most well-known and common varieties, their popularity is due to their simplicity of design, which makes them easy to operate and low cost. You can use houses or adhesive tapes that stick to any surface. This type of device has a double effect, since it allows you to catch both flying and crawling insects. However, it is recommended to use hanging adhesive tapes directly to kill flies. Despite the fact that crawling insects cannot get caught in such traps, they will be one of the most effective means against flies.
2. Devices containing baits poisoned with various types of insecticides. They are considered traps only formally, since in fact they are not intended for catching flies, but to attract their attention with food bait in order to cause poisoning and subsequent death. They are usually used to kill cockroaches orant, fly control devices are not so widespread, since other options are much more effective.
3. Mechanical traps with various baits designed to collect trapped insects. Devices of this type are used to catch virtually all types of insects and flies, in this case, are no exception. Exist various options, but they all function according to a similar principle: flies get inside a special container, attracted by the bait, but they can no longer get out on their own.
4. Electric traps are the most innovative way to combat, there are models designed to destroy different types insects. To attract mosquitoes and butterflies, special lamps are usually used, to the light of which they fly, but for flies, devices with a fragrant bait are suitable, which will attract them with its scent. After getting inside the trap, the insect will receive an electrical discharge that is fatal to insects, while it is not capable of causing any harm to humans or pets. Electric models are the most expensive, but they are also designed for long-term use, since the traps only need to be cleared of dead insects from time to time, after which they will be ready for use again. Today, there are two types of electrical devices: those that function after being connected to a home electrical network, or that operate on replaceable batteries. The second option is usually used for catching flies outdoors.

Trap overview

Given the wide range of modern fly-catching devices, it can be difficult to choose the most suitable option.

In order to make this process as easy as possible, the following is an overview of the most effective tools:

Aeroxon sticky tape is made in Germany and is the simplest fly trap. Its use does not require any additional costs, it contains only cellulose and ordinary glue, the device is environmentally friendly. Sold in sets, which include four skeins of tape at once, the price is 100 rubles.

The HELP trap also has an adhesive element in its design, designed to be placed on windows, so flies come across soon after entering the room. The main advantage is the almost complete invisibility of this device, which can be purchased you can for 80-100 rubles.

The Raptor trap can is especially effective for catching flies and other flying insects on the street. It is enough to put the bait that comes with the kit inside the tank, and then close the roof. The jar can be placed on any surface or hung on tree branches, and insects that get inside will no longer be able to get out. The approximate cost is 300-350 rubles.

The FC001 is a mechanical fly trap. It starts working after a special tablet is inserted into it, after which the device generates heat and odors that attract insects. It is enough to have in stock no more than 2-3 tablets, this amount is quite enough for the entire warm season. The price is about 3500 rubles.

The Excalibur Aqua 80 IPX4 ZSP005 is a unique instrument and trap designed specifically for flies that has no analogues on the market today. The device is recommended for installation in public catering, large enterprises or logistics centers, although it can also be used in residential premises. The basic principle of action is to kill the trapped insects with deadly electrical discharges. The body is made of high-quality and high-strength polycarbonate, and the trap itself is provided with a moisture protection system, which makes it unpretentious to the surrounding conditions. The approximate cost is 50,000 rubles.

"SKAT 23" is a domestically produced trap that, in addition to flies, can also kill mosquitoes, which makes it a multifunctional device. The design includes lamps of a special type that do not emit heat, but attract flying insects. As soon as they touch the protective grill, they receive a fatal current discharge. The device is environmentally friendly, silent and does not emit any third-party odors, while it the price is only about 4000 rubles.

Flypod ZF050 is distinguished not only by its high operating efficiency, but also by attractive design, which allows the fixture to blend harmoniously into virtually any interior. The combination of this factor with its small size and functionality makes the trap look like a small one. decorative lamp... Best for public places, cafes or living rooms where you don't want to use tape-like gadgets that are not very attractive. Insects die when they get inside and come into contact with the adhesive insert, which can then be replaced with a new one. The approximate cost is 8500 rubles.

Fly Web Fly Trap is a trap that has not yet become widespread in the domestic market, but it can be ordered over the Internet. Has several effects, including light, which allows you to attract not only flies, but also a number of other flying insects. The device is an energy consumer, therefore it can only function after being connected to the mains. The only drawback is only the fact that it is extremely attractive to butterflies, moths and other harmless insects, which are very likely to also fall into it. The cost of such a trap, excluding delivery, is about 2,000 rubles.

The Sterling Rescue Outdoor Fly Catcher Trap is also currently a model that is only available to order online. Externally, it is a reservoir bag made of durable plastic. To start operation, you need to add a small amount of water inside, and then hang the device in an apartment or on the street. A special attractant is placed inside it, which is quite attractive to flies and attracts them to itself. ... Trapped prisoners will no longer be able to get out, one trap is designed for 20,000 flies, after which it is disposed of. They must be used carefully so as not to damage the reservoir, and also to place them in safe places, since over time, larvae can begin to multiply inside. The approximate cost is 800 rubles excluding delivery, two devices are supplied in the kit at once.

A plant called the Venus flytrap is not a deterrent, but a real fly trap. In its natural environment, it grows mainly in swampy areas, where the soil is not fertile and does not actually contain nutrients... To compensate for them, this flycatcher eats insects, and flies form the basis of the diet. Such a plant can be planted on the territory garden plot or grow in a pot like indoor plant... It is recommended to keep it on the windows from the most sunny side and the Venus flytrap will become not only a decoration of the apartment, but also a real thunderstorm for flies that have flown into it.

DIY fly traps

The purchase of in-store accessories is not a prerequisite, as there are a number of ways self-made traps.

To implement this undertaking, you must use the following algorithm of actions:

1. Prepare a small glass jar into which you want to pour the juice. It should fill no more than a third of the container.
2. Add a few drops of soap or dishwashing detergent to the liquid bait, which will exclude the possibility of a possible escape of caught insects.
3. Roll up a piece of paper this wayso that it takes the shape of a cone, the diameter of one of the holes of which should not be more than 5-8 mm.
4. Paper cone inserted with the narrow side inside the can.
5. Flies will get inside homemade device through a small hole, after which they will either drown in the liquid, or remain sitting on the inner walls of the jar.

To do this, you need to repeat the sequence of actions described below:

1. Mix equal amounts of castor oil and rosin.
2. Melt the resulting mixture and add a small amount of honey and jam to it, which will be the main bait.
3. Cut stripes from paper sheets, the recommended width should be 5-8 cm.
4. Process both sides of the cut strips prepared mixture.
5. Hang a homemade trap in places, where a large number of flies usually live, after which they will begin to stick to its surface.

Everyone loves summer, but we are sure that no one likes the sudden increase in the number of creepy insects that breed at an alarming rate during the warmer months.

At the same time, no matter how clean you keep your house, there are flying aliens who stubbornly try to enter it and sometimes they succeed with varying degrees of difficulty.

And after that, the insects simply do not want to leave the comfortable dwelling of a person. Therefore, people have to invent the most different waysto get rid of uninvited guests. And here the ability to think creatively very often comes to the rescue.

For example, Imgur user Donkey1521 came up with a simple fly trap made from a regular plastic bottle. Easy to make and non-toxic, it fights a wide variety of flies, from large dung flies to small fruit flies.

In order to get started, you only need a few things: the trap itself needs a plastic water bottle, and the bait needs a banana and granulated sugar.

Imgur / Donkey1521

First, you need to cut the bottle in two using scissors or a sharp knife. To do this, mark the cut at a distance of about two-thirds of the bottle's height from the bottom, and then go around the circle with the cutting tool. When you're done, you should have two pieces: a smaller one with a lid and a larger one that can sit on a table.

Imgur / Donkey1521

Pour about one tablespoon of granulated sugar into most of the bottle until the bottom is covered. Then cut ripe or slightly overripe bananas into small pieces.

Imgur / Donkey1521

Place the sliced \u200b\u200bbanana on top of the sugar bottle; this sweet mix will help lure flies that feed on rotting products and decaying organic matter.

Imgur / Donkey1521

After you have the banana and sugar in the bottle, lightly mash them together to create a kind of puree. Add about 4 centimeters of warm water to the puree and stir the mixture gently. Warm water and sugar will make the banana rot faster, making it a more potent fly bait.

Imgur / Donkey1521

Now that most of the bottle is finished, you can move on to the smaller one. Unscrew plastic cover and turn the smaller part upside down. Then place the smaller portion over the larger so that the hole is in or directly above the banana mixture. Your trap is now ready for use.

Imgur / Donkey1521

This trap can be used for about a week. During this time, its lower part should be filled with flies. After a few days, it may start to look a little unpleasant, but it's worth getting rid of any flies that have entered your home.

Imgur / Donkey1521

Here's a close-up of how the fly trap works. The flies move down through the neck of the bottle at the bottom to the banana bait. After that, they struggle to get out through the hole and drown inside the bottle. Cruel, but it fulfills its function!

Imgur / Donkey1521

One of the most annoying and ubiquitous insects is the fly, which often flies into our homes. Sitting on a variety of surfaces and food, it carries on its paws a mass of pathogenic bacteria that can harm human health. The intrusive buzzing of an intruder often irritates us. However, not everyone can destroy a fast and agile fly with the help of a fly swatter. In this case, simple and convenient fly traps that you can make yourself will come to the rescue.

Simple homemade flycatchers

Before you start hunting flies, you need to determine what attracts them to our homes. First of all, these are products that are an optimal breeding environment and a source of nutrition. Slightly spoiled meat and fish with a smell will instantly attract the attention of flies trying to lay their eggs. It is for this reason that most often we cannot do without such baits.

There are the simplest fly traps that can be made from scrap materials without special skills:

• bait-based traps;
• poison bait traps;
• sticky traps;
• flycatcher-electroshock.

However, the process of creating an electroshock flycatcher is not simple and requires certain experience and professional skills.

Trapped by their plastic bottle

It is not difficult to make a flytrap from a regular plastic bottle. To attract an insect, an edible bait with a fragrant smell is used:

• liquid jam;
• coca Cola;
• any sugar-containing liquid that has undergone a fermentation process. For this purpose, you can add a little yeast to sweetened water;
• wine;
• beer;
• rotten fruits.

Advice. Do not use meat and fish products as bait, the stench will quickly spread throughout the room.

To make a trap you will need:

1. Cut the plastic bottle into two equal parts.
2. Turn the upper part of the bottle, resembling a funnel, upside down and set in the lower part. In this case, the neck of the bottle should not touch its bottom. For best results, keep in mind that the ratio of the height of the top and bottom of the bottle should be 1: 2.
3. To ensure the strength of the structure, secure the funnel using a stapler or tape.
4. Pour liquid bait on the bottom of the bottle.
5. Set up the trap where insects are most likely to occur.

Advice. If you add ground pepper or any granular insecticidal preparation to the sweet liquid, it will turn into a poisonous bait for flies caught in the trap.

Video: making a trap from a plastic bottle

Glass jar trap

A similar trap can be made from a glass jar and a plastic funnel:

1. Take a jar suitable size, and put slightly rotten sweet fruits on the bottom.
2. Turn the funnel over with its narrow end down and place it on the jar in the form of a makeshift lid.
3. Secure the funnel with tape or electrical tape, trying to seal all the cracks.

The jar can be placed near the trash can or on the windowsill, because flies always fly towards the light.

With the help of such a trap, you can catch not only flies, but also wasps and mosquitoes.

Plastic container trap

A small transparent plastic container can be useful for making a simple and reliable fly trap. For this purpose, you can use plastic cups or special containers for food:

1. Place an edible bait on the bottom of the container.
2. Tighten the top of the container with cling film, punching small holes in it with a knife.

The fly, sensing the smell of food, will try to penetrate into the plastic container through the holes in the film, however, the insect will no longer be able to get out to freedom.

Important! Try to dispose of the contents of the traps from time to time by removing captured insects and changing baits. Otherwise, such structures will become sources of unsanitary conditions.

Duct tape

Adhesive tapes are especially popular with fly hunters.
Prepare a composition from the following components:

• rosin or pine resin, previously melted in a water bath - 2 parts;
• flaxseed or castor oil - 1 part;
• sugar syrup or honey - a small amount for taste.

Actions:

1. Mix all the ingredients listed.
2. Using parchment, craft paper, or oilcloth, cut the strips 3-4 cm thick.
3. Apply the adhesive to the paper tapes.
4. Hang ribbons where insects are most concentrated.

Video: "mittens" sticky fly trap

Advice. As an adhesive, you can also use a specialized glue ALT, designed to combat rodents.

"Folk" fly repellers - plastic bags with water

Another way to keep flies away from your home is to use plastic bags filled with water around doors and open windows. The inventor of this method is a Swedish citizen named Sten Lindqvist, who claims that the effectiveness of this method is comparable to that of mosquito nets.
To create this kind of bleach, you will need:

• transparent plastic bag;
• pure water;
• several coins.

Actions:

1. Pour water into the bag.
2. Dip shiny small coins into the bag.
3. Tie the bag tightly.
4. Hang it from the side of the street near front door or an open window.

The principle of operation of such a device is based on the specifics of insect vision. Perhaps the sunlight hitting the coins through the water column blinds the flies, making your home invisible to them.

Video: the most harmless way to get rid of flies

However, reviews about the effectiveness of such a repeller are very contradictory.

On the weekend I went hunting with a friend on his estate, a huge wooden building (round timber), many rooms and living rooms. So, entering the living room, I butted my forehead on a transparent cellophane bag with water tied to the ceiling. On a silent question, the wife of a friend explained that this scares off the flies that are innumerable for this winter. This she spied on in Spain in butchers, where they sell jamon. So what happened next showed that there were no flies in the rooms with packages, in others (without packages) they flew sluggishly in sufficient quantities.

https://forum.auto.ru/housing/2126241/

The Mythbusters in Season 10 (Issue 157) refuted the myth that a hanging transparent bag of water scares off flies. They conducted a test, it turned out that the package, on the contrary, attracts!

https://www.forumhouse.ru/threads/5889/page-6

CD Trap

Another option for a homemade trap is a device made from a regular CD and an adhesive base. To make it you will need:

• CD;
• A small piece of rope;
• Honey or any other sticky and edible adhesive that can attract flies.

Actions:

1. Pass a rope through the hole on the CD and tie it with a loop. With this loop, you can hang the trap anywhere.
2. Apply honey or any other insect-friendly adhesive to the CD on both sides.
3. Place the CD in the freezer for 15 minutes.
4. After the sticky layer freezes, hang the trap where the flies congregate.

Advice. If the room temperature is high enough and the sticky compound starts to melt violently, return the CD to the freezer.

How to make an electric fly trap

With certain technical skills, you can create more sophisticated and effective trap designs at home. With the help of such devices, it is possible to catch various flying insects both indoors and outdoors.

Electric jump

Electric jump - homemade device, in which the light emanating from the light bulb acts as a bait, and the insect itself is drawn inward due to the operation of the fan.
To create such a trap, you will need:

• a small electric motor with a power of 10–20 W (for example, from any class III electric player);
• an electric light bulb with a socket;
• two cans of various diameters;
• aluminum plate 20x100 mm;
• two thick plastic washers;
• epoxy adhesive;
• two strips of metal;
• screws;
• screws M4;
• round wooden base;
• trap pouch made of nylon stocking;
• rubber ring;
• a power source, which can be a battery.

Electric pumping device diagram: 1 - rubber ring, 2 - electric motor, 3 - case, 4 - fan, 5 - cover, 6 - suspension, 7 - strip-bracket, 8 - M4 screw, 9 - washers, 10 - nylon bag

Actions:

1. Using a 20x100mm aluminum plate, cut out a few blades of the fan propeller. In the center of the plate, make a hole corresponding to the diameter of the motor shaft.
2. Then install an improvised propeller made of two plastic washers on the shaft, while bending the fan blades at an angle of 45 degrees.
3. For reliability, it is recommended to fix the "hub" using epoxy glue.
4. Fix the lamp holder securely with the screws on wooden base round shape.
5. Then connect it with a pair of metal brackets to the motor starter. Please note that the length of the strips should allow a gap of 50 mm and located between the motor shaft and the bottom point of the light bulb.
6. We install the resulting structure in a can, fixing it with M4 screws so that the fan itself is about 15 mm below the edge of the can.
7. The base of the lamp holder is covered with a lid made from a second can. In this case, a gap of 50 mm should remain between the edges of the main body of the device and the lid. Thanks to him, the insect will see the bright part of the structure, which acts as a light bait.
8. Using a nylon stocking, make a trap pouch by putting it on the lower part of the body. A rubber ring can be used as a retainer.
9. Connect the light bulb and motor to a power source by placing the unit under the ceiling of the room.

Flycatcher-electroshock

You can also use a homemade electric shock flytrap to kill flies indoors. To create such a device you will need:

• housekeeper light;
• high voltage module;
• finger battery.

Actions:

1. Initially, you should disassemble the light bulb, which may not be working. We leave the glass part of the lamp and the plastic cap.
2. Drill two holes on the sides of the plastic base of the light bulb, one opposite the other.
3. First, insert a soft aluminum wire and carefully wind it around the light bulb in one hole, and then in the other - the same wire in the same way.
4. One of the wires coming out of the neon lamp must be connected to one of the aluminum rods.
5. The remaining two free from each other outputs must be connected to the high-voltage module.
6. For the convenience of using the device, it is advisable to connect the high-voltage module to a power source through a switch. To do this, in the plastic cap left after disassembling the light bulb, you should make a rectangular hole using a sharp clerical knife. Install a button into it, after which you can insert the high-voltage module into the lid, unsoldering all the necessary wiring.
7. Then you need to solder the battery to the high-voltage module, securely fastening it with electrical tape.
8. To ensure a more reliable fixing, it is necessary to glue the high-voltage module to the plastic case using hot melt glue.
9. Then put a neon tab with a high-voltage winding on the high-voltage module so that the two wires in the product body and in the light bulb touch each other.
10. To prevent killed insects from falling to the floor, you can attach a plastic cap to the top of the light bulb using hot melt glue.
11. When you turn on the device, a neon light will light up, attracting a flying insect. A light touch will strike the fly with an electrical discharge.

Video: the process of creating an electroshock flycatcher

With a minimum of effort and money, it turns out that everyone can get rid of annoying flies from their home. Although the only disadvantage of such designs may be the lack of a guarantee of one hundred percent result, as well as an unaesthetic appearance.

Attracted by interesting smells, they fly into houses and apartments, verandas and sheds. In addition to the fact that their presence in the room annoys residents, flies on their paws carry germs and dirt, which can cause food spoilage and poisoning of people. A fly trap can solve the problem of annoying insects.

What attracts flies

Before getting rid of flies, you need to understand what has become the source of their attention. They may be attracted to smells:

• sweet jam, honey, syrup;
• ripe fruits and vegetables;
• meat and fish;
• food waste in the form of scraps and peels;
• vanilla, cinnamon, sweet flavors and additives;
• manure and sewerage;
• spoiled food.

By getting rid of potential fly baits, you can avoid their appearance in the house or significantly reduce their numbers. But in some situations, the invasion of flies may be associated with the presence of a nearby source of their attention and it is impossible to influence it. Then it remains to rely on traps or special poisonous insect repellents.

On a note!

Insecticides are also naturally based and safe for humans. The line contains poisons based on pyrethrum.

Unlike pesticides and synthetic insecticides based on Thiamethoxam (, Aktara), safe traps can be used in close proximity to people, animals, without fear for their health. The main principle of such a trap is to attract the fly to the bait and prevent it from leaving the trap. There are three types of traps:

1. Velcro - sheets of cardboard or tape covered with a sticky mixture that has a pleasant sweetish smell. Flies land on such baits and stick. Advantages of adhesive tape: easy to make and cheap to buy in a store, convenient to use anywhere, easy to clean up and dispose of along with stuck insects. The disadvantages include the unpleasant appearance of hanging traps in the room, the risk of hitting the head with a sticky bait suspended from the ceiling.
2. Trap traps with bait are made from improvised means. Insects fly into a certain compartment with a bait, but cannot fly back. You can use jam, honey, sweet water, pieces of fruit or meat as bait. The advantages of this method of catching flies are the ease of manufacturing the product and its effectiveness. The disadvantages of homemade products include bad smell spoiled food that lures flies, and the potential for the container to be knocked over by curious pets or a child.
3. ... Devices requiring supplies in the form of an insecticide in a bottle or from a special plate with a poisonous substance. Plus: they work without misfires. Minus: depending on the composition of the insecticide, it is sometimes necessary to ventilate the room after use.
4. Electric fly traps are special devices that run on electricity. They attract insects with ultraviolet glow and heat, but when flies come into contact with a certain surface, they kill them with a discharge of current. Such a blow is not capable of injuring a person, but for small flying insects it is fatal. Other electronic traps work differently - they suck in closely flying insects. The advantages of the electric trap are its stylish appearance, additional source light in the dark, high efficiency, safety for others. The disadvantages include the high price of electric fly exterminators, power consumption, and bulky devices.
5. ... When connected to the network, they emit a sound inaudible to the human ear, which should make the flies stay away. Cons: does not always work; pets hearing ultrasound may be against it.

Homemade traps

A person often uses his ingenuity to achieve certain goals. The fight against insects was no exception. Pesky flies can irritate even the calmest person. For the destruction of insects, especially enterprising people make homemade traps.

To make homemade products, you will need the usual plastic bottle 1 or 1.5 liters, scissors or a knife, any sweet filling, scotch tape.

1. The upper part is cut off from the bottle at a distance of 7-8 cm from the edge of the neck.
2. At the bottom of the resulting container, bait is placed: jam, honey, syrup.
3. The cut off funnel-shaped neck is pushed into the container with the neck down.
4. The wide edge of the funnel and the upper edge of the container are fixed with tape or electrical tape.

On a note!

The narrow edge of the neck should not touch the sweet filling. Flies should not reach the sweetness without flying into the bottle.

Such a fly trap from a plastic bottle can catch other sweet-tooth insects: wasps, bees, midges. Simple and affordable way making a trap allows you to throw it out with a large accumulation of insects inside and make a new one.

Glass flycatcher

You can make a fly trap from a regular glass or plastic cup and cling film. Put a teaspoon of honey or jam at the bottom of the glass. Cling film it is necessary to cover the cup and tighten it tightly, fixing the edges of the film with tape. Make 2-3 holes in the film so that the insect can penetrate into the glass. You can make several such homemade products and place them throughout the house.

Glass Jar Trap

In places where large flies congregate, you need a more serious bait - spoiled meat or fruits. They have a pungent strong odor and will attract more flying gnats.

1. A liter glass jar with a wide neck is taken as a container.
2. Several pieces of bait are put inside.
3. A wide funnel is installed on top with a narrow neck down.
4. The edges of the container and the wide edges of the funnel are fastened together with electrical tape or wide mounting tape for structural reliability.

On a note!

The strong smell of rotten vegetables, fruits or meat will be very unpleasant for the household and interesting for cats and dogs. Therefore, it is recommended to use such a flycatcher to catch flies on open verandas and place it in places inaccessible to animals.

Instead of a glass container, you can use a container made of dense plastic with a wide neck. The main condition for a reliable flycatcher is that there are no gaps between the funnel and the jar. Otherwise, flies can crawl out. Traps like these are good for if you place them around the perimeter of the site.

Duct tape

One of the most popular fly traps is duct tape... It is sold in any hardware store and costs from 20 to 50 rubles apiece. But if it is not possible to purchase a product in a store, you can do it at home. To do this, mix 1 tablespoon of rosin with a tablespoon of castor or flaxseed oil. Heat the resulting mixture in a water bath and stir for 5 minutes. Then add jam and cool. Apply the sticky mass to long strips of thick paper and hang in places where flies are often found.

If you follow the recipe, homemade glue remains sticky for a long time and is able to reliably hold insects attracted by the smell of jam on itself.

For people who do not have time to make homemade products, but want to quickly and effectively get rid of the flying gnat, there are electric fly traps. These devices are made of a metal case with a fireproof plastic coating, and have several UV lamps, the bright light of which attracts insects. On the way to the lamps, the flies fall on the grid, through which the current flows, and immediately die. The conductive element is protected by an additional coarse mesh to prevent accidental contact with a person or pet. Such devices also help to get rid of mosquitoes and midges.

Pest killer

Electric device for the extermination of flying insects. Two 20W ultraviolet lamps act as bait. Near the lamps passes metal gridconducting current. The trap is designed for flies and mosquitoes. For the correct functioning of the device it is necessary:

• set the trap on a flat surface;
• connect to the AC mains;
• make sure that moisture does not get on the device;
• periodically clean the dead insect tray.

The price of the device is about 3500 rubles. The device is durable and correct use will last for several years. The radius of the trap is up to 120 m 2. Power consumption 15 W. dimensions: 51x31.5x10.5 cm; weight 2.3 kg.

Well

Industrial electric traps are widely used in shops, warehouses, markets against flies, mosquitoes and other insects. The device is mounted on a wall at a height of 2 meters above the floor. The product includes ultraviolet lamps, the light of which attracts insects to itself. Flying close to the lamp, they fall on the conductive grid and die.

The main parameters of the Well electric trap:

• area of \u200b\u200baction up to 50 sq. m .;
• weight 3.3 kg;
• dimensions: 34x28x13;
• lamp power 8 W;
• body material - plastic;
• power consumption - 25 W;
• the price is 6800 rubles.