Fly trap. DIY trap for midges. Place the sliced \u200b\u200bbanana on top of the sugar bottle; this sweet concoction will help lure flies that feed on putrefaction and decaying organic matter

Flies are not just annoying insects, they are carriers of dangerous infections. In the warm season, they get inside when opening doors, through windows and vents. A fly trap from plastic bottle, tin or glass jars, as well as homemade energized devices and adhesive tapes.

Features of homemade fly traps

Homemade gadgets show good results when used to kill flies. Insects begin to besiege humans during the hot summer months, especially in July and August, when new offspring appear.

Traps fight the infestation of flies. A feature of homemade devices is the attraction of insects by smell. Flies arrive at the delicious aroma, but they cannot fly away and die of hunger.

A homemade flycatcher does not require special expensive parts. You can invent it from simple tools that are often sent to the trash. Some items will need to be purchased, but their cost is negligible compared to purchased flycatchers.

Homemade invention - the best way, because it immediately kills several hundred pests, does not require physical activity, works silently and does not harm the human body, unlike chemicals and poisons.

Attention! A homemade fly trap in the country and in the apartment will not give a 100% guarantee of destruction.

Warnings:

When disinfecting, use agents that are safe for people.
If you spot wasps or other insects, buy a spray and spray on the trap before approaching it.
Place homemade models away from flowers and dining tables.

How to make a flytrap with your own hands

Homemade traps are a great alternative to industrial devices. It will take a minimum of time and tools to fight insects. Traps are made quickly.

The advantage of such devices is that they do not contain chemical substancesdo not pose a serious threat to human health.

How to make a flytrap from a plastic bottle with your own hands

For manufacturing, you will need a plastic bottle or eggplant, scissors, a knife, sugar, honey or banana, dry yeast, water.

Step-by-step instruction:

Divide the bottle into 3 parts. Cut off the top.
Pour sugar at the bottom so that it completely covers all the bumps.
Add water, honey and yeast. Mix. If using banana, but cut into small pieces or mash with a fork. The mass should be homogeneous. The bait is rotten fruit, a piece of meat with a smell, or another product that emits a strong aroma.
Place the upper part of the bottle with the neck down, after removing the cap.

Advice! Leave a distance between the neck and the sweet bait. The flies fly in and cannot fly out.

In about a week, the bottle flytrap will be filled with insects

Do not shake flies out of the trap, discard the plastic bottle. Make another trap. No need to try to knock out insects. They stuck to the walls and sugar, and even more so to tear them off by hand, this is not hygienic.

How to make a flytrap with your own hands can be seen in the following video:

How to DIY a glass jar fly trap

To make a flycatcher, you need a glass jar and a funnel of a suitable size. The latter can be made from a plastic bottle.

Place nuts or peanut butter in the bottom of the glass jar. Attracts flies well apple vinegar, to which the dishwashing detergent is added. Otherwise, insects can drink it while standing on the surface of the liquid. Overripe fruits, which begin to rot and ferment, work great.

Then a funnel is inserted inside, which should be fixed. There should be no gaps between it and the walls of the glass jar.

Around the circumference, you can wrap with tape or duct tape

The second option is to finish making an effective fly trap using cling film. Wrap the neck tightly around it. The film should hold, not slip. Can be secured with a rubber band or wrapped around with tape.

Make a few holes in the middle of the film so that the flies can fly in. They will not be able to fly outward, since it will not be possible to find the holes. In addition, the flies will not want to leave the container.

When the trap is full of enough insects, it should be taken to the bathroom. Turn on hot water in the sink, close the drain hole and the holes in the film. When there is enough water, put a jar in it and leave for 10 minutes. The flies will die from the hot temperature. The rest can be drowned.

Throw away the flies with the contents of the glass jar. To make a new trap, the jar will have to be disinfected or treated with safe chemical means.

How to DIY a fly trap from a metal can

For homemade device Any tall metal can will do. For example, from soda, stew, dog food. Scotch tape or any duct tape... You can take double-sided tape.

Important! The container for making a trap must be washed and dried. Remove the label. The shiny color will attract flies.

Wrap a metal can with adhesive tape. If using scotch tape, wrap it up with the sticky side down without touching it. Otherwise, you won't be able to make a fly trap.
Rub the tape around the entire circumference with your fingers so that it adheres well to the metal.
Remove the adhesive tape. If the surface metal can does not stick well, repeat the procedure.
A sweet bait will help attract flies to the trap. The top is covered with cling film, as is the case with glass jar... Make a hole.

The flies will fly on the smell and stay inside, some of the insects will stick to the outer walls.

When enough fruit flies have gathered outside and inside, the trap is disposed of, it cannot be reused.

A glass trap is made in the same way. It is placed on a flat surface, and jam is put inside. For large individuals, this trap model will not work.

How to make an electrofire trap with your own hands

A homemade automatic fly trap is not as effective at repelling insects as other devices, but is more environmentally friendly. How it works - The light from an incandescent lamp lures flies, which they can reach through a wire mesh connected to a high voltage. A flycatcher, a stun gun with its own hands, exposes an insect to an electric discharge, as a result of which it dies.

You will need to buy the following elements - a regulator for adjusting the required voltage (a dimer is suitable), an automobile ignition coil or another, a double grid and a lamp for attracting.

The ignition coil without assistance will not be able to generate the high voltage that it could; beams of current no more than 14 watts are fed to its input. To do this, you need a thyristor voltage regulator, which cuts off some part of each half-cycle of the alternating current, the pulse duration becomes less or longer. The frequency remains the same.

Plugs in from 220 W socket

The design of the thyristor regulator will not allow direct connection to the ignition coil, because it can vary the voltage from about 220 W and above, this is too much for the ignition coil. For this, a capacitor is connected in series with the regulator.

Further, the voltage goes to the common wire of the ignition coil - B, and the left terminal marked with the letter K. High voltage removed from the common wire and from the central high-voltage output. The wires are fed to the mesh.

By adjusting the voltage of the variable resistor, a moment is selected at which a spark does not begin to slip between the grids. Shocks even without a visible arc.

To build the mesh, you will need 2 pieces of chipboard, in which you will need to drill 4 holes in the corners and punch 6 mm diameter studs through the pieces of chipboard. The wire is wound in a circle around the perimeter of the entire structure. Then drill 4 more holes, but at a distance closer to the edge.

Attention! Before making holes for the inner mesh, you should take this into account, leaving a stock of holes for the outer one.

Use the wire without insulation. Inside the chipboard, make a hole for the lamp so that it passes freely through it.

How to DIY a sticky fly trap

The main thing in the flycatcher is a sticky and viscous substance that will not allow the insect to escape to freedom. To prepare a fly trap, you will need rosin, castor oil, a thin soft cloth and two sushi sticks, a metal container for boiling the mixture, and a mini-burner. Any oil can be used, but then the Velcro will have to be changed more often.

Put rosin (2 parts) in a container, place on a mini-burner. When the mixture boils, hold for a minute.
Add oil (1 part), then heat for 60 seconds.
Leave the mixture to cool. After 20 minutes, it will thicken if the proportions are right.
Slip the material between the stapled sushi sticks. Wrap the strip several times to fix the fabric.
Apply the prepared glue evenly to the material.
Twist the cloth with chopsticks to smear the back as well. If surplus appears at the edges, remove.

It is necessary to change the trap when there is no free space on the adhesive tape, or new flies will be able to free themselves

Hang the finished Velcro in the place of local accumulation of flies. Attach the trap to a clothespin or attach it to the ceiling with a button.

How to DIY an Australian Flycatcher

it best trap for flies, falling into which they die from dehydration. Australian device homemade type - the most high-tech solution without the use of chemicals.

Step-by-step instructions for making a trap:

Take a timber of the required size. The optimal one is 40 by 40 mm.
Make grooves for installing the mesh. Set the saw depth to 12 mm, clamp the bar and make cuts. Repeat the process on the other face, so that they are at an angle of 90 ° C. Connect the frame so that the homemade trap has legs.
Make a pyramidal bottom. Give the process maximum attention. Cut the mesh into 4 triangles, turn the model over and screw them to the bars so that the pyramid is inside the body.
Make a hole at the top so that the flies can enter, but cannot escape. Close the rest of the sides with a dense mesh. Make the top of the box a lid so that it closes tightly.
Put the bait inside.

You can set the trap on your lawn or in your home. It is recommended to make the bait yourself or buy it at a household goods store.

A huge number of flies will gather in the trap in a week.

How to DIY a Window Fly Trap

Such a device is made like an adhesive tape. Only the glue is applied to one side of the fabric. With the sticky part, the glue window fly trap is turned away from the window. You can attach the fabric with a hot gun or use buttons for old frames.

For the second method of making a window fly trap, you will need cardboard packaging or a rectangular-type metal container. The width should match the corner of the window.

Cut the container at an angle, leave the partition at the bottom. Treat the inner part with adhesive.

Caught insects remain inside, the product should be changed as flies stick

How to make your own outdoor fly trap

In the summertime, it is impossible to sit outside on a warm evening. The flies literally gather in a swarm and bite. They fly into the light. For the outdoors, you can make a trap from a plastic bottle with sunflower oil or other bait.

Cut off the top of the container along the edge, put something inside that will attract flies. Use a sharp object to make two holes on the sides of the neck, thread the rope. Remove the lid, insert the top into the lower part of the plastic bottle, secure the structure with tape or tape. Hang your homemade trap under the lamp.

Attention! Such a device will also attract mosquitoes. Once inside, they cannot get out.

Street trap options

You can put the product near your home, next to an outdoor toilet, chicken coop or barn. If natural baits are used, they are placed near the resting place.

How to DIY a Fly Trap with an UV Flashlight

A more complex device with an ultraviolet flashlight attracts insects better. For manufacturing, you will need a tin can, scotch tape or electrical tape.

Wash the jar and dry it in the sun so that the glue remains on the outer surface. Glue the adhesive tape on the outer surface, put in a warm place for an hour. Glue the flashlight inside with hot glue. Remove the tape. Turn on the flashlight.

Advice! You don't have to buy a flashlight to make a trap. A small UV light keyring is enough.

The light will attract flies, which on the way to it will stick to the sticky side of the can, this design works more efficiently at night

The second way to make a homemade trap with an ultraviolet flashlight:

Take a plastic container with a tight-fitting lid.
Make a hole in the bottom. Skip the fabric, tie a knot so that it does not go through the hole. The fabric on the other side will be attached to the ceiling with a button.
Make many holes in the container. Glue the plastic jar with tape, leave for a while. Remove the adhesive tape, the glue should remain on the surface.
Put inside ultraviolet flashlight, include. The light will pass through many holes, attracting flies, which, trying to crawl through the small holes, will adhere to the surface of the container.

How to improve the effectiveness of traps

The likelihood of insect extinction quickly increases if you use several types of traps. To catch more flies, it is recommended that you make some homemade gadgets and place them at different ends of the apartment or garden.

Attention! The flies should not be able to intercept a piece of food outside the trap.

The efficiency of crafts will be higher if you remove all food in the apartment, take out the trash. All food should be refrigerated. Especially berries.

Dionaeus flower will help to increase the effectiveness of traps. It is not whimsical to care for, it can be planted in the garden near the resting place or kept in the house. This is a predator flower, it eats insects.

Conclusion

A plastic bottle fly trap is the simplest, it can be quickly made. At the same time, in terms of efficiency, it is not inferior to the devices of industrial production. All proposed models of traps can be used in the fight against other insects - wasps, hornets, mosquitoes.

How to make an insect trap? This question is asked by all summer residents and residents of private houses. Wasps, flies, mosquitoes begin to precipitate a person on hot summer days, especially in July and August. At this time, young offspring appear, which need a lot of food. Therefore, males and females scurry in search of food. They fly for food, especially for sweets and meat. Mosquitoes annoy with painful bites.

Many people are allergic to wasp stings. Therefore, people have to apply many methods of insect control. The bites of these insects are very unpleasant, especially for children. Sometimes you have to call ambulanceto avoid suffocation due to allergic reaction. The easiest way to get rid of wasps. You can try to find the nest and destroy it. But wasps fly around the site. Mosquitoes can crawl into every crevice of the house, just like flies. Therefore, you need to know how to make a trap at home.

An effective trap for wasps and flies

There is a very effective device that has been tested by many site owners. To make it, you need a plastic bottle of 1.5 or 2 liters. The cover must be removed from it. The bottle must be cut into two pieces. In this case, the upper part should be half the size of the bottom. You will need to put liquid bait inside. So that it does not spill, you need to place the upper part in the lower part with the neck inward. At this point, the trap can be considered ready.

Any sweet liquid can be used as bait. But it is best to take fermented compote, as it has a sharper smell. This completes the instructions on how to make a trap. Insects will fly to the smell and get inside, but they will not get out. Trying to crawl along the walls of the bottle, a wasp or fly ends up in a dead end, which is formed due to the upper neck. It is better to make several such baits. They should also be reinforced in case of strong winds.

What bait is better to take

Flies are different, therefore, certain baits should be used for them. Houseflies and similar species like sweets the most. Large species are practically not interested in sugar, so it is better for them to put fresh meat or fish in the bait. Fruit flies may only be interested in fruit, juice, or compote. Wasps love sugary sweets most of all, such as honey. Unfortunately, such traps will not help against mosquitoes.

Such devices are very effective. But there is a certain species - fruit flies, which rarely fly into the can. The way to make a trap for them will be discussed below. The funnel trap is not suitable for household use. It's all about unpleasant odor, which begins to emanate from the bait after a few days. But if you change it more often, then the trap is quite suitable for rooms.

DIY fly tape

The most common way to get rid of flies is with Velcro tape. These are sold at every hardware store. Flies readily sit on the tape, since it has glue applied to it, which contains a bait. The insect cannot fly away from such a device. The tape works for a while, but then the glue dries up. This device has many advantages. It is affordable, harmless to humans. The tape does not smell, does not emit toxic substances.

How to make this type of fly trap? Many people think that this is impossible. But in reality, you can make a tape quickly. To do this, you need to take linseed or castor oil, resin or rosin. You need to take glycerin, honey or sugar as bait. Melt all the ingredients in a water bath and apply them to paper tape. You will get an excellent analogue of a store device. This type of tape is suitable for catching fruit flies, as they like to land on the surface.

Readers now know how to make a wasp and fly trap. Surely many are also interested in what goals the insect pursues. If bees live to make honey, then flies and wasps pursue completely different goals. They try to lay as many eggs as possible. One fly manages to reproduce up to 2000 larvae. Moreover, they live only a couple of months, and sometimes up to two weeks. The fly lays about 120 eggs per clutch.

A cesspool, compost heap, and even soil in a flower pot are best suited for this. The fly will appear in a couple of weeks. Moreover, the warmer the ambient temperature, the faster the larva matures. In winter, the flies sleep. An active life begins only when the total daily temperature is +20 degrees. There is one more interesting fact... Surely, many are interested not only in how to make a trap at home, but also in why flies are always sitting on the windows. They just have compound eyes, because they simply do not notice transparent objects.

Why flies are dangerous

Insects, in particular flies, are carriers of many diseases. Therefore, it is important to get rid of them in time. If wasps are dangerous because of bites, then flies can cause not only food poisoning, but also the most dangerous diseases. Some of them are typhoid, fever, cholera, dysentery, brucellosis, etc.

Unusual but easy way to get rid of flies and wasps

Not everyone knows how to make a trap with your own hands using a fly agaric. Surely no one thought about the origin of the name of this mushroom. It is necessary to collect fly agarics in August. A few hats will be enough. They should be crumbled in disposable tableware and cover with sweet water. A plate of mushrooms should be placed in the garden or in another place where insects gather. Wasps and flies will react immediately to the bait. You don't even have to chop up the fly agarics, but simply sprinkle the caps with sugar. A syrup is formed on the surface, to which insects will stick.

How to get rid of mosquitoes

To control mosquitoes, you can make a regular sippy trap, but there is also a better remedy. It is worth trying to make an electromechanical device. To create it, you need several materials at hand. The main component of the trap is the electric motor. Thanks to him, the trap has a suction effect. It pulls the mosquitoes inside a special container from which they cannot get out.

How do you make this type of mosquito trap? Everything is very simple. The power supply is based on direct current. A regular cooler can become a fan for the device, only, preferably, large. You can take a plastic bucket from mayonnaise as the basis of the case. In the bottom of the can you need to make a hole equal in diameter to the dimensions of the cooler. The fan is usually sold with screws. They can be used to screw the device to the bottom of the bucket. The cooler is attached outside, not inside.

Trap bait

A suitable bait will be a light bulb with a bayonet base, as well as a holder for it. The surrounding air will heat up and illuminate the space at the same time. Everyone knows that light is the main bait for insects. Instead of a light bulb, you can use LEDs. Moreover, it is more economical to buy them in the tape, and not separately. In addition to light, you will need another bait. Komarov will be interested in carbon dioxide, for which you need to dilute the same amount of sugar and 5 g of yeast in 0.5 cups of water. The bait should be added to the container to be attached to the trap body.

These are the easy but effective methods for dealing with flying insects. They are much safer than aerosols and other chemicals. Therefore, it is better to spend some time making your own trap than spending money on other methods of fighting insects.

Various methods can be used to combat them, including traps, which have the following advantages:

However, there are some disadvantages to using traps, the main ones are:

Low efficacy compared to using insecticides, which make it possible to virtually instantly destroy entire populations.
Lack of protective effect. Only those individuals that fall into the set traps will be destroyed.
It is necessary to wait for the moment when the fly will pay attention to the trap and fall into it, while some other methods allow you to immediately go to the destruction of pests.

Types of traps

The classification of such devices is carried out according to the principle of their operation today, in accordance with this criterion, the following varieties can be distinguished:

Glue traps are one of the most well-known and common types, their popularity is due to their simplicity of design, which makes them easy to operate and low cost. You can use houses or adhesive tapes that stick to any surface. This type of device has a double effect, since it allows you to catch both flying and crawling insects. However, it is recommended to use hanging adhesive tapes directly to kill flies. Despite the fact that crawling insects cannot get caught in such traps, they will be one of the most effective means against flies.
Devices containing baits poisoned with various types of insecticides. They are considered as traps only formally, since in fact they are not intended for catching flies, but to attract their attention with food bait in order to cause poisoning and subsequent death. They are usually used to kill cockroaches orant, fly control devices are not so widespread, since other options are much more effective.
Mechanical traps with various baits designed to collect trapped insects. Attachments of this type are used to catch virtually all types of insects and flies, in this case, are no exception. Exist various options, but they all function according to a similar principle: flies get inside a special container, attracted by the bait, but they can no longer get out on their own.
Electric traps are the most innovative way to fight, there are models designed to destroy different types insects. To attract mosquitoes and butterflies, special lamps are usually used, to the light of which they fly, but for flies, devices with a fragrant bait are suitable, which will attract them with its scent. After getting inside the trap, the insect will receive an electrical discharge that is fatal to insects, while it is not capable of causing any harm to humans or pets. Electric models are the most expensive, but they are also designed for long-term use, since the traps only need to be cleared of dead insects from time to time, after which they will be ready for use again. Today, there are two types of electrical devices: those that function after being connected to a home electrical network, or that operate on replaceable batteries. The second option is usually used for catching flies outdoors.

Trap overview

Given the wide range of modern fly-catching devices, it can be difficult to choose the most suitable option.

In order to make this process as easy as possible, the following is an overview of the most effective tools:

Aeroxon sticky tape is made in Germany and is the simplest fly trap. Its use does not require any additional costs, it contains only cellulose and ordinary glue, the device is environmentally friendly. Sold in sets, which include four skeins of tape at once, the price is 100 rubles.

The HELP trap also has an adhesive element in its design, designed to be placed on windows, so flies come across soon after entering the room. The main advantage is the almost complete invisibility of this device, which can be purchased you can for 80-100 rubles.

The Raptor trap can is especially effective for catching flies and other flying insects on the street. It is enough to put the bait that comes with the kit inside the tank, and then close the roof. The jar can be placed on any surface or hung on tree branches, and insects that get inside will no longer be able to get out. The approximate cost is 300-350 rubles.

The FC001 is a mechanical fly trap. It starts working after a special tablet is inserted into it, after which the device generates heat and odors that attract insects. It is enough to have in stock no more than 2-3 tablets, this amount is quite enough for the entire warm season. The price is about 3500 rubles.

The Excalibur Aqua 80 IPX4 ZSP005 is a unique instrument and trap designed specifically for flies that has no analogues on the market today. The device is recommended for installation in public catering, large enterprises or logistics centers, although it can also be used in residential premises. The basic principle of action is to kill trapped insects with deadly electrical discharges. The body is made of high-quality and high-strength polycarbonate, and the trap itself is provided with a moisture protection system, which makes it unpretentious to the surrounding conditions. The approximate cost is 50,000 rubles.

"SKAT 23" is a domestically produced trap that, in addition to flies, can also kill mosquitoes, which makes it a multifunctional device. The design includes lamps of a special type that do not emit heat, but attract flying insects. As soon as they touch the protective grill, they receive a fatal electric shock. The device is environmentally friendly, quiet and does not emit any third-party odors, while it the price is only about 4000 rubles.

Flypod ZF050 is distinguished not only by its high operating efficiency, but also by attractive design, which allows the fixture to blend harmoniously into virtually any interior. The combination of this factor with its small size and functionality makes the trap look like a small one. decorative lamp... Best for public spaces, cafes, or living rooms where you don't want to use tape-like gadgets that don't look very attractive. Insects die when they get inside and come into contact with the adhesive insert, which can then be replaced with a new one. The approximate cost is 8500 rubles.

Fly Web Fly Trap is a trap that has not yet become widespread in the domestic market, but it can be ordered over the Internet. Has several effects, including light, which allows you to attract not only flies, but also a number of other flying insects. The device is an energy consumer, therefore it can only function after being connected to the mains. The only drawback is only the fact that it is extremely attractive to butterflies, moths and other harmless insects, which are very likely to also fall into it. The cost of such a trap, excluding delivery, is about 2,000 rubles.

The Sterling Rescue Outdoor Fly Catcher Trap is also currently a model that is only available to order online. Externally, it is a reservoir bag made of durable plastic. To start operation, you need to add a small amount of water inside, and then hang the device in an apartment or on the street. A special attractant is placed inside it, which is quite attractive to flies and attracts them to itself ... Trapped prisoners will no longer be able to get out, one trap is designed for 20,000 flies, after which it is disposed of. They must be used carefully so as not to damage the reservoir, and also to place them in safe places, since over time, larvae can begin to multiply inside. The approximate cost is 800 rubles excluding delivery, two devices are supplied in the kit at once.

A plant called the Venus flytrap is not a deterrent, but a real fly trap. In its natural environment, it grows mainly in swampy areas, where the soil is not fertile and does not actually contain nutrients... To compensate for them, this flycatcher eats insects, and flies form the basis of the diet. Such a plant can be planted on the territory garden plot or grow in a pot like indoor plant... It is recommended to keep it on the windows from the most sunny side and the Venus flytrap will become not only a decoration of the apartment, but also a real thunderstorm for flies that have flown into it.

DIY fly traps

Buying in-store accessories is not a prerequisitesince there are a number of ways self-made traps.

To implement this undertaking, you must use the following algorithm of actions:

Prepare a small glass jar into which you want to pour the juice. It should fill no more than a third of the container.
Add a few drops of soap or dishwashing detergent to the liquid bait, which will exclude the possibility of a possible escape of caught insects.
Roll up a piece of paper this wayso that it takes the shape of a cone, the diameter of one of the holes of which should not be more than 5-8 mm.
Paper cone inserted with the narrow side inside the can.
Flies will enter the homemade device through a small hole., after which they will either drown in the liquid, or remain sitting on the inner walls of the jar.

To do this, you need to repeat the sequence of actions described below:

Mix equal amounts of castor oil and rosin.
Melt the resulting mixture and add a small amount of honey and jam to it, which will be the main bait.
Cut stripes from paper sheets, the recommended width should be 5-8 cm.
Process both sides of the cut strips prepared mixture.
Hang a homemade trap in places, where a large number of flies usually live, after which they will begin to stick to its surface.

The same methods are used to combat them.

First of all, it is necessary to find the source of their distribution and get rid of it, most often these are stored at room temperature fruits or vegetables, and garbage bag.

If there is no effect for several days, it is necessary to use certain techniques:

clean the entire apartment;
get rid of food debris, regularly wash the plates of animals, wash the trash bin, rub kitchen cabinets thoroughly using an alkaline solution;
turn on the insect fumigator;
spread the sticky tape with fruit juice and use it for its intended purpose;
lean the mosquito plate against the window; when heated, they will destroy pests;
collect insects with a vacuum cleaner from the source from the distribution, immediately take the bag with garbage out into the street;
treat sewer drains with chemical agents, pour soda into the drain first, then vinegar, after the reaction is completed, turn on the water and clean the drain.

When living near the garbage dump, it is necessary to hang a net on the windows through which insects cannot penetrate into the room.

Traps

On sale you can find ready-made fly traps, they are highly efficient, main manufacturers: Aeroxon, Raptor... The principle of their action is that insects flock to the smell of liquid and stick to the inside of the structure, externally the trap remains clean.

There are also natural trap flowers, for which insects serve as food, they are absolutely safe for humans, do not differ large size and do not require special care. The process of closing and opening a flower during the capture of prey is also very interesting to observe.

DIY traps

The simplest method of getting rid of midges is considered to be an empty bottle with a fairly narrow neck, where you need to pour a little mixture of fruit juice and soapy water.

The solution should be poured into several jars with a wide neck, placed in places where insects accumulate.
Drosophila will fly to the odor exuded by the solution, but when it gets into the container, they will not be able to get out of it due to the lack of a film on the surface of the water.
The solution must be topped up as it dries.

Such a simple technique allows you to get rid of pests, but it takes more time.

There is a high probability that the insects have already laid the larvae in a secluded place, the process of getting rid of them can take a week.

It should be borne in mind that midges can appear even as a result of a piece of apple accidentally left on the table.

The principle of operation is the same, but in this case you only need kvass, juice, or rotten pieces of fruit, vegetables or fruits... As a container can be used old mug or glass jar.

1/4 of the container must be filled with bait;
the inlet must be closed with a paper funnel;
flies should fly in from the wide end, but they will no longer be able to find a narrow hole.

If midges appeared at the end of summer, they will help get rid of them. watermelon or melon.

Fruit slices must be placed in a bulky bag and left in the kitchen overnight.
The bag must be free of holes, but must be open to allow insects to enter.
In the morning, you must close it with a sharp movement and take it to the trash.
If, after that, midges start flying in the kitchen again, then the insects have laid the larvae, from which new individuals hatched.

Drosophila in houseplants

Quite often, fruit flies hover around flower pots, they are attracted by rotting leaves and wet soil... Sometimes the reason for the spread of midges is soil contaminated in the store, if there are such doubts the soil must be kept in the oven before use.

Plant it is not recommended to transfuse, fallen flowers and leaves must be thrown away. A match will also help to reduce the number of insects, which must be stuck into the soil with a painted end. If midges are found in a pot of flowers, it is also recommended to water the plant with a harmless insecticide, the action of the drug is primarily aimed at destroying midges and their larvae.

Dichlorvos is considered the most extreme measure to get rid of midges; it is not recommended to stay indoors during the disinfection period.

Traditional methods

Over the years, the people have also figured out how to deal with fruit flies. Fighting with these methods is not difficult, but at the same time very effective.

fern leaves, elderberry and tansy spread out in all rooms, midges will fly away due to an unpleasant smell for them;

Tansy is prohibited for use with weak cerebral vessels, it can cause headaches in patients.

kerosene, turpentine - it is recommended to add to water when cleaning floors or windows;
tomato seedlings, eucalyptus, geranium - flies will fly away due to an unpleasant smell;
laurel oil - it is recommended to use it for rubbing window frames and jambs.

- an insect that, in favorable conditions, is capable of rapid reproduction and development. About how long fruit flies live and what kind of them - read on our website.

Prophylaxis

In order to prevent the appearance of mold and rottenness, it is necessary to check the food stored outside the refrigerator at least once a week. The reproduction rate of fruit flies is very high, if the focus of their distribution is not eliminated in time, their number will rapidly increase.

It is also necessary to dispose of garbage in a timely manner, do not leave vegetables and fruits outside the refrigerator for a long time.

Drosophila most often occurs near decaying products, especially a lot of them can be found in the kitchen, big problems can arise if the house is located near the trash can. To get rid of them, it is recommended to use traps that you can make yourself.

It is very important to keep the room clean, throw away the trash regularly, and do not leave food for a long time at room temperature. In extreme cases, you can use dichlorvos, if midges are bred in plants, they must be treated with insecticides. Compliance with these rules is the answer to the question of how to remove Drosophila flies once and for all.

If you find an error, please select a piece of text and press Ctrl + Enter.

Attracted by interesting smells, they fly into houses and apartments, verandas and sheds. In addition to the fact that their presence in the room annoys the inhabitants, flies on their paws carry germs and dirt, which can cause food spoilage and poisoning of people. A fly trap can solve the problem of annoying insects.

What attracts flies

Before getting rid of flies, you need to understand what has become the source of their attention. They may be attracted to smells:

sweet jam, honey, syrup;
ripe fruits and vegetables;
meat and fish;
food waste in the form of scraps and peels;
vanilla, cinnamon, sweet flavors and additives;
manure and sewerage;
spoiled food.

By getting rid of potential fly baits, you can avoid their appearance in the house or significantly reduce their numbers. But in some situations, the invasion of flies may be associated with the presence of a nearby source of their attention and it is impossible to influence it. Then it remains to rely on traps or special poisonous insect repellents.

On a note!
Insecticides are also naturally based and safe for humans. The line contains poisons based on pyrethrum.

Unlike pesticides and synthetic insecticides based on Thiamethoxam (, Aktara), safe traps can be used in close proximity to people and animals without fear for their health. The main principle of such a trap is to attract the fly to the bait and prevent it from leaving the trap. There are three types of traps:

Velcro - sheets of cardboard or tape covered with a sticky mixture that has a pleasant sweetish smell. Flies land on such baits and stick. Advantages of adhesive tape: easy to make and cheap to buy from a store, convenient to use anywhere, easy to clean up and dispose of along with stuck insects. The disadvantages include an unpleasant appearance hanging traps in the room, the risk of hitting the head with sticky bait suspended from the ceiling.
Trap traps with bait are made from improvised means. Insects fly into a certain compartment with a bait, but they cannot fly back. Jam, honey, sweet water, pieces of fruit or meat can be used as bait. The advantages of this method of catching flies are the ease of manufacturing the product and its effectiveness. The disadvantages of homemade products include the unpleasant smell of spoiled products that play the role of bait for flies, and the likelihood of the container being tipped over by curious pets or a child.
... Devices requiring supplies in the form of an insecticide in a bottle or from a special plate with a poisonous substance. Plus: they work without misfires. Minus: depending on the composition of the insecticide, it is sometimes necessary to ventilate the room after use.
Electric fly traps are special devices that run on electricity. They attract insects with ultraviolet glow and heat, but when flies come into contact with a certain surface, they kill them with a discharge of current. Such a blow is not capable of injuring a person, but for small flying insects it is fatal. Other electronic traps work differently - they suck in closely flying insects. The advantages of the electric trap are its stylish appearance, additional source light in the dark, high efficiency, safety for others. The disadvantages include the high price of electric fly exterminators, power consumption, and bulky devices.
... When connected to the network, they emit a sound inaudible to the human ear, which should make the flies stay away. Cons: does not always work; pets hearing ultrasound may be against it.

Homemade traps

A person often uses his ingenuity to achieve certain goals. The fight against insects was no exception. Pesky flies can irritate even the calmest person. To kill insects, especially enterprising people make homemade traps.

To make homemade products, you will need an ordinary plastic bottle 1 or 1.5 liters, scissors or a knife, any sweet filling, scotch tape.

The upper part is cut off from the bottle at a distance of 7-8 cm from the edge of the neck.
At the bottom of the resulting container, bait is placed: jam, honey, syrup.
The cut off funnel-shaped neck is pushed into the container with the neck down.
The wide edge of the funnel and the upper edge of the container are fixed with tape or electrical tape.

On a note!
The narrow edge of the neck should not touch the sweet filling. Flies should not reach the sweetness without flying into the bottle.

Such a fly trap from a plastic bottle can catch other sweet-tooth insects: wasps, bees, midges. Simple and affordable way making a trap allows you to throw it out with a large accumulation of insects inside and make a new one.

Glass flycatcher

You can make a fly trap from a regular glass or plastic cup and cling film. Put a teaspoon of honey or jam at the bottom of the glass. Cling film it is necessary to cover the cup and tighten it tightly, fixing the edges of the film with tape. Make 2-3 holes in the film so that the insect can penetrate into the glass. You can make several such homemade products and place them throughout the house.

Glass Jar Trap

In places where large flies congregate, you need a more serious bait - spoiled meat or fruits. They have a pungent strong odor and will attract more flying gnats.

A liter glass jar with a wide neck is taken as a container.
Several pieces of bait are put inside.
A wide funnel is installed on top with a narrow neck down.
The edges of the container and the wide edges of the funnel are fastened together with electrical tape or wide mounting tape for structural reliability.

On a note!
The strong smell of rotten vegetables, fruits or meat will be very unpleasant for the household and interesting for cats and dogs. Therefore, it is recommended to use such a flycatcher to catch flies on open verandas and place it in places inaccessible to animals.

Instead of a glass container, you can use a container made of dense plastic with a wide neck. The main condition for a reliable flycatcher is that there are no gaps between the funnel and the jar. Otherwise, flies can crawl out. Traps like these are good for if you place them around the perimeter of the site.

Duct tape

One of the most popular fly traps is sticky tape. It is sold in any hardware store and costs from 20 to 50 rubles apiece. But if it is not possible to purchase goods in the store, you can do it at home. To do this, mix 1 tablespoon of rosin with a tablespoon of castor or linseed oil... Heat the resulting mixture in a water bath and stir for 5 minutes. Then add jam and cool. Apply the sticky mass to long strips of thick paper and hang in places where flies are often found.

If you follow the recipe, homemade glue remains sticky for a long time and is able to reliably hold insects attracted by the smell of jam on itself.

For people who do not have time to make homemade products, but want to quickly and effectively get rid of the flying gnat, there are electric fly traps. These devices are made of a metal case with a fireproof plastic coating, and have several UV lamps, the bright light of which attracts insects. On the way to the lamps, the flies fall on the grid, through which the current flows, and immediately die. The conductive element is protected by an additional coarse mesh to prevent accidental contact with a person or pet. Such devices also help to get rid of mosquitoes and midges.

Pest killer

Electric device for the extermination of flying insects. Two 20W ultraviolet lamps act as bait. Near the lamps passes metal gridconducting current. The trap is designed for flies and mosquitoes. For the correct functioning of the device it is necessary:

set the trap on a flat surface;
connect to the AC mains;
make sure that moisture does not get on the device;
periodically clean the dead insect tray.

The price of the device is about 3500 rubles. The device is durable and with correct use will last for several years. The radius of the electric trap is up to 120 m 2. Power consumption 15 W. dimensions: 51x31.5x10.5 cm; weight 2.3 kg.

Well

Industrial electric traps are widely used in shops, warehouses, markets against flies, mosquitoes and other insects. The device is mounted on a wall at a height of 2 meters above the floor. The product includes ultraviolet lamps, the light of which attracts insects to itself. Flying close to the lamp, they fall on the conductive grid and die.

Main settings electric trap Well:

area of \u200b\u200baction up to 50 sq. m .;
weight 3.3 kg;
dimensions: 34x28x13;
lamp power 8 W;
body material - plastic;
power consumption - 25 W;
the price is 6800 rubles.