How to make a flower bed out of tires. What flower beds can be made from old tires: photos and videos How to turn a tire out ways

Almost every summer resident strives to decorate his site as interestingly as possible. Various varieties of flowers and plants are used, original ideas landscape design. And for this it is not at all necessary to use expensive materials and spend a lot of time. You can decorate the site with your own hands using improvised means. For example, with the help of tires, which can stylishly and very funny diversify an empty place.

For many years, summer residents and gardeners have been using car tires for their garden as decoration. This method of decoration has many advantages:

• Old tires can be very profitable to buy or even free to take from someone. Surely a couple of your friends stale unnecessary wheels.
• There is no risk to this product. For example, moisture, bacteria, fungi are not able to have a negative impact on the product. And if the paint fades and cracks over time, it would be useful to update it.
• With the help of car tires it is possible to realize the most daring design ideas.
• The tire structure is compact, and if necessary, it is just right to rearrange it to another place without any problems.

How to cut flower beds from a tire: step by step instructions

Making a beautiful flower bed of car tires with your own hands is simple and profitable, you just need to make a little effort. It is important to follow the sequence and recommendations when making such a decorative element. Below you can study the step-by-step instructions for making garden decorations from car wheels.

Select Forms

The first step, of course, is choosing the idea and shape of your decoration. And there are many ideas - in the form of a flower, a well, a tea cup and much more. When determining the final option, be guided by your taste, the features of the garden.

Choose the right tires

Of course, the opportunity to choose is always a plus. Therefore, it is better to select products with the highest tread wear. the worn tread layer softens the tires and makes them more comfortable in terms of making bizarre shapes.

If you have a choice - the old car tires Russian or foreign production, it is better to stop at the latter option. The thing is that they have a thinner, softer rubber, from which it is more convenient to make figures.

And if you have to choose between winter or summer car tires, it is better to prefer winter tires.

Draw cut lines

To draw a cut line, you need to determine what shape you want to make - a flower with sharp or smooth edges, a large bowl, a vase with wavy lines, or even a swan. It is desirable to apply the contour with a felt-tip pen or chalk.

The photo below is an example of a circuit:

Note! If you just want to beautifully paint the tires for the flower garden, then you do not need to apply cut lines and cut.

Cut along the contour

To cut a beautiful flower bed out of tires, it is important to do everything carefully. This will help not only to get a non-standard product, but also to avoid injuries. It is advisable to use a sharp knife or jigsaw if you have one. In the video below you can see how the cutting step goes.

Video: how to make a flower bed out of a tire with a knife in 5 minutes.

Video: how to cut and unscrew a tire with a jigsaw.

Arrange the finished product

The final step in making a flower bed from old tires with your own hands is the design, because black tires in the garden will look depressing and not aesthetically pleasing.

To paint old car tires for flower beds, it is recommended to use enamel, oil, nitro paints, as well as car paint. Their advantages include long-term coverage and ease of application.

There are absolutely no boundaries in decorating a product: you can use only one color or combine several of your favorite colors. It is not commonplace to make beautiful drawings, an ornament.

Video: flowerbeds of tires and tires that you can do in the country with your own hands.

Ideas for flowerbeds from old tires

Well

Flower garden from a car tire in the form of a flower bed - perfect solution for those who want to achieve a feeling of rustic comfort on their site. In addition, the well will emphasize the beauty of your flowers.

Instructions on how to make a flower bed in the form of a well from rubber tires:

• Take three old tires of the same size.
• In each of the tires, make a slot with a sharp knife on the opposite side. Such an action will help in the future to push the support posts for the roof of the well. But the columns can be made from the outside.
• Lay the rubber tires on top of each other so that their slots match.
• Insert supports, such as beams, bars, into the holes of the wheels. The support must be buried in the ground. However, the ground under the structure must be smooth for the well to be stable.
• It is better to make the roof of the well as natural as possible, that is, similar to the real roof of the well - the design will look even more beautiful and cozy. For this reason, the roof is best made from roofing materials.
• It is necessary to install a support under the roof between the bars.
• After that, boards, metal tiles, slate and other materials are attached to it. It is also not a sin to make a well cover using cut tires.
• After that, proceed to the design - paint the well as you like.

Below you will find photos of a flower bed in the form of a well of tires for inspiration and ideas:

Turtle

The design of the tires in the form of a turtle is truly very beautiful. Thanks to interesting look she is able to literally revive any suburban area and make it a little fabulous.

tea cups

Tea cups made of rubber tires will look original in any garden. To make them yourself, just follow a simple step-by-step instruction:

• Take two tires of different diameters.
• Stack them on top of each other - a smaller diameter wheel on the bottom, and a wider wheel on top.
• Fasten them with screws.
• To make the design realistic, make a rubber saucer and a handle from scraps. The latter can also be attached with screws.
• There are several options for painting the cups: in one bright color, or to make the design as realistic as possible and paint in one color, and then draw polka dots.

Video: beds of tires and tires in the form of tea cups

Frog

It is clay frogs that often decorate summer cottages. Green beauties fit perfectly into the garden surroundings. But frogs made of rubber tires will also look extraordinary.

Look how cute the cheerful frogs look!

Flamingo

Flamingo birds of paradise now have the opportunity to live not only in exotic lands, but also in your garden! Just stock up on tires and pink paint. Look at the photos below, what beautiful birds you can make from car tires:

Video: how to make a flamingo from car tires.

Crocodile

Dangerous predators in nature can become cute animals from tires in your country house. Green structures will organically look next to flowers, shrubs, trees.

Photo gallery of ideas

In fact, there are a lot of ideas for creating decorations from tires for the garden and summer cottages. You can be inspired by ready-made ideas or come up with something of your own, very original and unforgettable. Therefore, we suggest you look at the photos with a variety of options for inspiration and new ideas:

Beautiful designs from old car tires will add a unique charm to your garden, garden and summer cottage. They will not only delight you every time, but also pleasantly surprise your guests.

In contact with

To ennoble your site with beautiful flower arrangements, it is not at all necessary to buy expensive outdoor flowerpots. A unique frame for flowers of various shades and shapes can be made by hand. We decorate the cottage with flowerbeds from tires: interesting ideas and options for making flowerpots will help to make garden plot unique and inimitable.

Features and Benefits

Making a flower bed from a tire, you can realize almost any creative idea. To make such a budget option framing flowers on the site is quite simple - just show a little imagination and make a little effort. Tire beds have a number of advantages:

• tires are durable;
• tires tolerate temperature extremes well;
• almost any paint fits well on the rubber surface;
• no need to spend money on material: almost everyone can find an old tire;
• improvised items can be used as decorative elements.

Due to the fact that rubber is a fairly pliable material, the tire can be given a variety of shapes. You can paint the product in absolutely any color. Such a product can be used not only as a decorative element, but also as a functional attribute of the site. For example, in such flower beds you can plant small seedlings.

Design

You can make a flower garden using ready-made examples, or using your own original ideas. You can supplement the finished design with any available materials: it all depends on your imagination and skill. The process of creating a flowerpot is often not completed after cutting and painting the tire. A product of complex shape in the form of an intricate figure must be supplemented with decorative elements. When making a flower garden, you may need the following materials:

• decorative and natural stones;
• construction metal grid;
• plastic bottles;
• remnants of various building materials;
• colored glasses.

From several flower beds you can form bright compositions. A combination of multi-level flower beds looks more impressive various forms . A popular option is a composition of flower beds in the form of cups and a teapot. For its design, you do not have to turn the tire inside out and cut out patterns on it. It is enough just to arrange several tires of different sizes, form handles from pieces of rubber and paint the finished products.

Unusual

In the nursery play area flower beds in the form of animals or fairy-tale characters will be appropriate. You can make a turtle from a tire and tread:

• the protector must be cut into four equal parts;
• in the tire you need to make 4 cuts under the paws of the turtle;
• pieces of the protector are inserted into the holes and fixed with staples.
• the tail is made from a small piece of rubber, fastened with wire staples;
• the turtle's neck can be made from a polymer pipe.
• a crumpled paper head is attached to the neck with adhesive tape.
• all structural elements are painted in the appropriate shades.

Other materials can be used to make the turtle's head, neck, paws, and tail. The product can be decorated with additional items (for example, put a small hat on the head of the turtle, and glasses on the nose).

Flower

Near the house, flower beds that look like a flower will look good. Before you start making such a flowerpot, you need to decide on the shape of the petals. Petals can be in the form of a triangle, semicircle, rectangle or wavy. Sometimes they are narrow at the base and wide at the edges.

On the outer surface of the tire outline the contour of the petals. For marking, you can use chalk or a felt-tip pen. Using a shoe knife or jigsaw, cut out the petals. If the rubber is quite dense, and a knife will be used as a cutting tool, it is recommended to periodically dip the blade in soapy water during the cutting process.

Grasping the edges of the cuts, you must carefully turn the tire inside out. The finished product needs to be painted. Flower-shaped flower beds look more attractive if you use different shades color palette.

On a leg

From a solid wheel (tire with a disk) you can make a magnificent flowerpot on a leg.

The workflow for creating such a flower bed consists of the following steps:

• in the tire, reaching the tread with a cutting tool, cut out the petals of the desired shape;
• then the upper and lower parts of the tire are turned out (the disk does not need to be removed - it will be the leg of the flowerpot);
• the top is painted saturated colors, the lower one will be a kind of stem if it is painted in green color.

Swan

One of the most common options for flowerbeds from tires is a product in the shape of a swan. Such a flower bed is made in the same way as a flowerpot in the shape of a flower. The difference will only be in more complex cutting. You can use the ready-made scheme, which shows the lines of the wings, tail, neck and head of a swan for applying to the tire.

After marking the tire, the very shape of the swan is cut out. Next, you need to unscrew the tire and complete the formation of the swan. The beak can be made of rubber, or any other comfortable material, paint with orange paint and attach to the head with self-tapping screws. The eyes of a swan can be made from pieces of electrical tape.

Usually the figure is painted in White color, but no one forbids the use of other shades (you can make multi-colored plumage).

A master class on making a swan from tires, see below.

Required Tools

To start making flower beds from tires, you need to prepare necessary tools. First of all, this is a tool that will be used for cutting rubber (knife, electric jigsaw, grinder). If you decide to use a knife, the blade must be sharpened well. It is worth considering that it is rather problematic to cut dense rubber with a knife. To make your job easier, the blade must be lubricated with grease before cutting. If the knife will not be used as the main tool for cutting the tire, it can be useful for making small cuts.

Using an electric jigsaw as a cutting tool will be the most the best option. The more powerful the jigsaw, the easier it is to cut the wheel. For cutting tires ideal option there will be a blade made of high-quality steel with a reverse tooth. Cutting a tire with a grinder is much easier than with a knife or jigsaw. The disadvantage of this tool is that the rubber along the edges of the cut will be melted, the cutting procedure will be accompanied by an unpleasant pungent odor.

If for the manufacture of a flowerpot it is necessary to cut the protector, it is better to do it with a grinder.

Then you should decide on the type of paint for the flower bed. Almost any paint fits well on rubber. The following types are mainly used:

• aerosol;
• oil-based enamel;
• nitro enamel;
• car enamel.

If necessary, prepare a brush to paint the tire. You will need gloves to work, they will protect your hands from paint or other possible contaminants.. To apply the markup, you will need chalk, marker or soap. In the manufacture of complex figures, some elements will have to be made from improvised materials. To fasten additional parts to the main figure from the tire, you will need staples, self-tapping screws.

How to do?

Making complex figured flower beds from tires is a laborious process that requires patience and some physical effort. Whatever shape you want to give a flower bed of tires, the procedure for making a flowerpot will always be almost the same. Here step-by-step instruction, according to which you can independently make a figured flower bed from tires:

• We choose a tire. So that working with rubber does not cause unnecessary trouble, you need to take tires that can be easily cut (old, badly worn, winter thin or imported).
• Thoroughly clean and dry the tire.
• Decide on the form. It is necessary to mark the cut line with chalk or a marker. The marks on the tire must be done as carefully as possible in order to facilitate the process of cutting out the figure in the future.
• Cut along the drawn line, and then take out the upper part. You can use a high power jigsaw.
• We turn the tire inside out (you need to take hold of the cut edge with your hands, having previously stepped on the middle of the tire and pull the rubber towards you with force).
• We grind the cut edges and process them with gasoline.
• At the end, the flower bed should be painted, dried well and, if necessary, decorated with additional elements.

View

All flowerpots from tires can be divided into two main types: solid and cut. by the most simple option flowerbeds of tires is a tire in its original form. You can improve the appearance of such a flowerpot using paints. Such flower beds can be placed in small groups, or they can be made up of a multi-level structure.

A multi-level design will look more attractive if you give it the shape of a pyramid. To do this, you need to take tires of different diameters and install them on top of each other. The difference in tire diameter should be at least 20 cm. Hanging flower beds will become more interesting solution. A hanging flower garden can be placed along a wall or a blank fence. The shape of such a flower bed can be very diverse.

The inner space of the tire must be filled with soil. As a drainage, you can use a mixture of small stones and sand. When making a hanging flower bed, several small holes must be made in the tire so that excess moisture can drain freely. Flowerbeds in the form of plants, animals or mythical creatures are more laborious, but they look quite impressive.

With the help of a tire and a cutting tool, you can realize any author's idea.

In addition to dividing into two main types, there is an additional classification of flowerpots from tires. Flower beds are divided by size and shape as follows:

• high;
• low;
• single-tier;
• multi-tiered;
• curly;
• round.

Material

The ease of manufacture of the flower bed, as well as its appearance, will depend on the material chosen. When choosing tires, you need to consider the following features:

• the process of making a flower bed will be easier from old tires, worn rubber is more pliable;
• imported tires are thinner than domestic ones and are more amenable to cutting;
• winter tires are more flexible than summer tires;
• tires with a metal cord are more difficult to cut;
• if in the manufacture of a flowerpot it is necessary to turn the rubber inside out, you need to select a tire with the most worn out tread.

A flower bed can be made from rims or solid (rims with tires) machine wheels. Such material is used much less frequently than the usual tires, but flowerpots made of disks look no less attractive. Whatever material you choose to make a flower bed, it must be thoroughly rinsed from dirt. This can be done with a garden hose.

Clean material will facilitate the process of making a flowerpot and will not spoil the cutting tools.

In addition to the basic rules for making flower beds from tires, it is important to know some of the subtleties of its placement on the site. It is better to place a flower bed on a well-lit and relatively flat area. In large areas, multi-tiered structures will look better. Having decided on the placement, under the base of the flower bed it is necessary to make a container from boards or other solid material.

It is important to prepare good soil for flowers. The soil mixture should not be too oily so that moisture can easily pass to the roots of the plants. It is important not to forget about the drainage layer, which can be made of expanded clay or gravel. To retain moisture in the soil and facilitate plant care, the area around the flowerpot should be sprinkled with gravel or sand.

It is better to paint the wheels in light colors: this will avoid overheating of the soil in summer period. When painting, also consider the following:

• Before painting, the tire must be thoroughly cleaned, dried and degreased. You can treat rubber from fatty contaminants with a solvent, gasoline or acetone.
• It is advisable to cover the tire with paint in several layers. A thin layer of paint can quickly wear off or crack. Applying many layers is not worth it, this will lead to a quick peeling of the paint. It would be optimal to paint the product two or three times.
• If you want to plant bright flowers in a flower bed, it is better to paint the tire in delicate light colors. In flowerpots of bright colors, it is better to plant light, small flowers.
• It is acceptable that the shade of flowers echoes the color of the flower bed.
• Painting a flower bed is not only from the outside. If you capture the inner edges with paint, the flower bed will look more voluminous.
• The flowerpot does not have to be painted in one color at all; interesting patterns of a different color can be applied to the tire.

To apply the pattern, you can use pre-made stencils made of cardboard.

How to make a flower bed Master's Secret from tires, namely from tires, and not from a tire. The master shares the secret of making a beautiful flower bed from several tires with his own hands. An example of a homemade flower bed of three tires is considered.

Advantages of the flowerbed Secret of the Master

How to make a flower bed Master's Secret

Everyone dreams of making their dacha, yard or garden beautiful and memorable. One example of creating beauty is the organization of various flower beds - flower beds. The easiest way is to buy ready-made solutions for creating flower beds - planters, baskets and various flower beds. When creating an expressive composition, the cost of the kit will be very impressive and clearly inaccessible to most gardeners. In this situation, the Master invites you to show ingenuity, minimal skills and make a flower bed with your own hands from tires. Tires most available material for such creativity. For crafts, the Master uses the old tires of his car and relatives. By default, relatives bring old unnecessary tires to my workshop)))). Tires of any size will be used. The flowerbed of the tire looks reliable and strong. Rubber doesn't deteriorate. Appearance tire beds will improve dramatically when the sides are made in the form of petals. With the appropriate coloring, the sides will look like leaves or flower petals. You can show your imagination and expand your possibilities by creating a flower bed of tires with an unlimited wheel diameter. At the same time, the issue of the difficulty of turning the tire inside out according to the proposed technology will not interfere with the process.

Advantages of homemade flower beds from tires:

• accessible and free material;
• all the conditions for your fantasies of decoration;
• the possibility of creating a unique flower bed;
• Variations in the size and shape of the flower bed are acceptable.

What tires are suitable for flower beds

It must be understood that any homemade product will require time and effort. Having a modern power tool makes this job easier. Working on a homemade flower bed should be fun and it depends on the degree of preparation. The most convenient for cutting will be tires with a nylon cord. Honestly, I have never come across such a tire. Therefore, more worn tires should be preferred. Don't be fooled by the assumption that winter tires are easier to cut - they are not.

Tools and materials for making a flower bed Master's Secret from tires

The master facilitates your work and offers you clear recommendations and the procedure for creating a bed of tires as a worthy element to be included in landscape design. You will need the following tools and materials:

• car tires of the same size - 3 pieces;
• sharp knife (powerful is acceptable);
• angle grinder with cutting discs;
• wax pencil;
• gloves;
• paints.

Drawing a pattern of petals

We apply with our own hands a pattern of petals on one side of each of the three tires. The author used a wax pencil, which, in addition to the durability of the application, also acts as a lubricant for the cut with a knife. Petals can be drawn by hand or use a ready-made stencil. See photos and videos.

Drawing a pattern of petals Drawing applied

Making a flower bed Secret of the Master with your own hands

Step 1. According to the intended pattern, cut out the petals on each tire with a knife. Work carefully.

Step 2 Using an angle grinder, we cut all the tires into two parts. This process is noisy, smoky and rather dirty due to the release of soot on the tool.

Step 3. We turn out all the halves. Compared to a whole tire, this is now easy to do. Watch the video.

Cut out the petals petals cut out Half turned inside out

Step 4. We connect the halves of the tires in pairs together. Initially, I was going to connect the parts with screws and nuts through washers, but I decided not to spend money and went the simplest way - I made a connection from two galvanized nails. Just punched the edge of the two halves with nails and bent the nails. See photo.

Step 5. Next, we fasten the connected pairs together. At this stage, the photo shows a variant of a flower bed of four halves. It turned out a flexible design, of course heavy, but for a flower bed it’s even good (it won’t blow away with the wind). After assembly, the flower bed should be cleaned of dirt and dried.

Step 6. We install the flower bed on the prepared place and carry out the painting. It is NOT MANDATORY to paint the entire flower bed. It makes no sense to paint the internal volume, as well as the front part of the flower bed immersed in the ground. The paint is applied in 2-3 layers. You can paint with a brush, roller or from a spray can. Painting with a brush is the most budgetary and allows you to apply paint without flaws. Keep in mind that overgrown flowers can hide your artistic coloring.

Step 7. We put nutrient soil in the flower bed and plant flowers. See photos and videos.

Flowerbed painting

To create an expressive appearance, a flower bed needs a border designed to clearly indicate the boundaries of the structure. An unusual decision In this situation, there are old car tires that car owners throw into a landfill as unnecessary, simply polluting the environment. A product made by hand from a used tire will not only help in protecting the environment, but will also become a spectacular decoration of a flower bed in your garden.

Peculiarities

Flowerbeds from used tires have a lot of advantages:

• Even a consumer with an average income can afford to set up a flower bed on his suburban area or under the windows of the house, because tires that have served their age do not represent any material value. The used material can certainly be found with car owner friends who dream of getting rid of old tires. For them, this is garbage, and for an amateur landscape designer, it is the basis of a future masterpiece.

• Waste tires no longer have the original stiffness, so they are easily amenable to any treatment. When decorating, a small set of tools is used: chalk, a sharp knife or jigsaw, a can of paint. The simplest garden structure does not require any processing - the tire is placed on the ground and filled with soil.

• The rubber garden accessory is known for its durability: it is not afraid of moisture, does not rot, bacteria and fungi are not afraid of it. The likelihood that it will crack from mechanical shock or severe frost is too small. But even in this case, the situation is solvable - old tire easily replaced by another.

• A waste tire bed is a compact mobile structure that is easy to transport and easily change location. Nothing prevents you from transporting it even to another city, you just have to remove the old soil.

• Tires are characterized by the ability to transform. Even unique flower beds, created with love with your own hands, can get boring over time. An easy way to remedy the situation is to repaint the product. With the help of cans of paint, you can endlessly vary the color scheme, constantly changing the surroundings of the garden plot.

• A flower bed from a used wheel - always a win-win for landscape design. This material makes it possible to creativity, express yourself, show your artistic potential.

There are no significant deficiencies in the products. But adherents of classicism do not favor them: some require something more familiar and elegant, others do not want to spend time making decorative compositions.

The disadvantages include the combustibility of the material, but subject to fire safety this fact is irrelevant.

How can you do?

To create the simplest flower bed from an old wheel, step-by-step instructions are not required - just pour soil into the tire, and the flower bed is ready. But even such a trivial thing can be made beautiful, give it character and add some "zest".

To create an elegant flowerpot from tires, it is enough to make leaves or petals of different sizes along the edge:

• To do this, the inner edge of the rubber wheel is cut in the form of a zigzag or wave, then the product is turned inside out, sanded and coated with the desired paint.
• But first, they mark out the future shape of the flower bed, applying the ornament with chalk. At this stage, you should give free rein to your imagination and draw any ornament you like.

What to cut?

After marking the pattern, it is required to cut the tire for the future flower bed. This is the hardest part of the job. To do this, you need a sharp knife, jigsaw or grinder. It takes a little longer to cut with a knife, but the grinder melts the rubber and adds an unpleasant odor.

To increase the slip of the knife blade, it can be lubricated with liquid soap during the cutting process. The use of a jigsaw will greatly facilitate the process, which allows you to cut out even the most complex shapes.

When cutting, you can be injured, so be sure to use special gloves and goggles. It is better to work on a solid wide surface: a stable table or a piece of plywood laid on the ground.

A respirator will save you from the abundance of rubber dust, which Chinese tires are famous for.

You need to cut the pattern strictly along the intended line, then the product will turn out to be smooth and beautiful. The cut out part is not thrown away, it can be used as a base for a stand or a border for a miniature flower garden.

How to turn out?

To turn the wheel out, you need to lay it with the cut side down, grab the cut edge and try to turn it inside out. It is important to at least start by manipulating a small part of the tire. Further, the process will go easier - each part will carry the next one after it. This work requires a certain physical strength, the girls will have a hard time here.

How to color?

The process of decorating a tire is the most pleasant stage in manufacturing, it requires preliminary preparation. The surface of the future form is carefully polished to smooth out roughness and other defects. Then the rubber blank is washed from fine dirt and dust stuck in the treads, and degreased with a solvent or white spirit. Only after that they start painting.

paint wheel tires Can:

• brush;
• spray gun;
• from a balloon.

Using a brush allows you to paint even the most hard-to-reach areas on the surface, including the gaps between the treads. This method is effective, but takes a lot of time. With the help of a brush, they also create more subtle graceful patterns, emphasize the details and shapes of the product.

The atomizer guarantees uniform distribution of the coloring matter. The advantage of such staining is the absence of streaks and brush marks. The paint consumption in this case is slightly higher than in the previous version.

It is most convenient to do this with a can, but this method is the most expensive.

Enamel, oil or nitro paints are used as coloring solutions. The paint is applied not only to the outside, but also captures the upper 10-15 cm inner surface. As a primer, it is better to use a layer of white and only after that apply a colored layer: this way the finish color will be brighter and more even.

After painting for several days, you need to dry the workpiece in the sun.

When painting tires, you should follow a few rules:

• when choosing light shades for the border of the flower bed, the soil inside it will not overheat along with the roots of the plants;
• no need to apply a thick layer of paint, otherwise it may crack, especially in frosty winters or scorching summer heat;
• too colorful flowerpot ornament can distract attention from the flower arrangements themselves.

Color palette is selected according to the design concept of the garden:

• metallic silver will turn rubber tire in a glamorous steel vase;
• green color will mask a decorative element on a green lawn;
• bright spectacular shades will make accents on the garden plot.

The form can be left monophonic or applied with a stencil, decorated with a strip or a pattern that imitates brickwork, checkerboard - a variety of ornaments provides great opportunities and scope for the flight of fantasy of landscape designers.

Where to place?

Regardless of the location of the structure, a flowerbed from an old wheel always looks impressive and attracts attention. Fancy figures from tires can be made to decorate the yard, placing them in the front garden at the entrance or on the playground, they look good in the yard of a private house or in the country.

Flowerbeds are installed directly on the ground or on special stands, hung on walls and trees as flower pots, pyramids and other complex structures are made from them.

If there is a strong fence or a blank wall near the house, you can arrange a flower garden on them by hanging the tires on cables or chains. The space inside is filled with earth, suitable flowering plants. Holes are made in the rubber so that there is where to drain excess water. The bottom of the flowerpot is covered with drainage - enough small pebbles and sand.

This version of the flower bed is relevant for verandas or walls of gazebos.

Design examples

There are a lot of original ideas on how to make your own flower bed from old tires. All that is enough for your creative imagination in creating a flower garden, has the right to exist.

The main thing in the landscape design of a personal plot is to decorate everything in the same style:

• Tires installed on top of each other in a checkerboard pattern can serve as a flower bed. Such a fence will not only become a wonderful decoration of the yard, but also allow you to zone the space near the house.

• The composition in the form of a children's pyramid consists of several wheels of different diameters. The top is often a miniature decorative wheel or flower pot.

• From the many old tires, a structure in the form of a “flower mountain” is well obtained. The composition does not require cutting and turning the tires, you just need to paint and assemble them in a certain order. At the base of the mountain there are 6 wheels, 5 on them, then 3 pieces, one small tire crowns the composition.

• The tire from the car can be used in a vertical position. To do this, it is screwed with a screwdriver to wooden wall by type of mailbox. It will look impressive climbing plants or flowering nasturtium and petunia.

• Old tires are able to take the form of any animals and birds, insects and other representatives of the fauna. The theme can be dishes or household items, cartoon characters, architectural monuments, floral motifs.

Flowerbed in the form ladybug or a cup of coffee, funny Minions or the Leaning Tower of Pisa - nothing is impossible with a flexible rubber material.

Chamomile flower bed

If the space of the backyard allows, you can make a flower bed. The design requires 4 tires, of which 3 must be cut across into two parts - they will become the petals of the future chamomile. The whole tire will be the middle of the flower, around which you need to lay the petals.

Tires are dug into the ground by 5-6 cm. Previously, all blanks are painted in bright positive shades. Petals can be both in one color scheme, and alternate with each other in 2-3 colors.

An extraordinary addition to the pattern can be glued glass pebbles; in a flower bed, such decorative elements will resemble frozen dew drops, which will greatly enliven the design.

decorative well

Even those who do not have special artistic skills and rich imagination will be able to design such a flower garden. A tire well does not require much time and special costs, but it will look spectacular in landscape design.

Such a decorative object will harmoniously complement the cozy atmosphere of the courtyard of a private house, and bright design designs will emphasize the beauty of garden flowers.

For the construction, you will need three old tires of the same size. In each of them, cuts are made from opposite sides with a sharp knife in order to insert further support posts for the roof. The poles can also be installed on the outside of the tires, which greatly simplifies the work.

Many people believe that only an experienced specialist can develop a beautiful landscape design. But practice shows that such a point of view has nothing to do with reality. make a garden or household plot everyone is capable - there would be a corresponding desire.

Fundamentals of landscape design

To give or adjoining territory looked decent, often neither high professionalism nor significant financial costs are required. Everything can be used: fragments of bricks, stones, plastic bottles, old watering cans and much more.

Flowerbed of tires

For example, an alpine slide, which is the object of dreams of many owners of suburban areas, may well be built without the involvement of specialists. The most important thing is not to be afraid to experiment and boldly combine miscellaneous items and objects.

Interesting. Often, old junk, which, it would seem, is time to throw it away, can do a good job in decorating the territory.

So, for example, a beautiful stand for a flowerpot will turn out from an old rickety chair. With an old chest of drawers, if you tint it and decorate it accordingly, you can decorate any blank wall by planting bright flowers in its boxes.

More complex structures can also be made from improvised materials, for example, having a metal rod and flower pots at hand, you can build a very interesting vertical flower bed.

Among domestic gardeners and owners of suburban areas, flowerbeds made of tires are in rather high demand. They will be discussed further.

Types of flower beds from tires

To start creating flowerbeds from tires with your own hands, you do not need special experience and knowledge. The most important thing is to have the necessary tools at hand and to have basic information.

According to the type of construction, flowerbeds from tires are:

• low;
• high;
• single-tier;
• multi-tiered;
• curly;
• suspended;
• round.

Round flowerbeds made of wheels are the easiest option to implement. All that is required to organize a flower garden is to take tires, paint them in arbitrary colors, fill them with soil and plant plants.

Interesting. To get an interesting composition from a material such as a tire, you can paint the wheel material in bright colors and, stacking on top of each other, form high flower beds.

As for multi-level structures, they are created from tires of various diameters. They are placed on top of each other according to the principle of a toy pyramid (in descending order of size) and filled with soil. This design is perfect for planting ampelous plants.

Layered tire construction

Hanging flower beds from tires are allowed to be fixed different ways: to a pipe, chains or a rope to a tree branch, etc. Only first you should not forget to cover the bottom of an impromptu planter with some material.

Step by step instructions

Before proceeding with the manufacture of flower beds from tires, you should decide on the dimensions and design.

flower bed

Do-it-yourself flower beds from tires look very stylish. To work, you will need a tire, a sharp knife that can cut thick rubber, and a marker (or chalk).

Flowerbeds in the shape of a flower Manufacturing work is carried out as follows:

1. The cut points are marked with a marker.
2. The tire is cut along the circumference in the form of zigzag petals (oval, semicircular or triangular).
3. The tire is turned over and, leading the knife along the thickening, a circle is cut out from the back of the tire.
4. Along the circumference inside the tire, transverse cuts are made at a distance of 20 to 25 cm from one another, starting from the cut edge and to the end of the tread.
5. The tire remains to be unscrewed, and the design of the flower bed is ready.

flower bed

Then you need to paint the product in beautiful colour, fill with earth and plant flowers. Oil paint works best. Other types of paint may peel off.

Flowerpot from an old wheel

Flowerpot from an old wheel

Another interesting workshop that would be useful to bring is devoted to making a stylish garden vase from a worn wheel. To work, you need to prepare a tire that has a disk, knife and marker. Then they act according to the following scheme:

1. A zigzag line is marked along the circumference of the tire, along which it will then be necessary to cut.
2. Cut the tire. To facilitate the work of cutting, it is recommended to periodically dip the knife in machine oil.
3. Turn the cover inside out. It is better to turn out together and in parts.
4. The vase is ready. Only the same paint job remains.

Important! Before pouring earth into such a vase, you must not forget to put a gasket on the bottom, in which small holes should be provided to remove excess water after watering.

Flowerbed chamomile from a tire

This is another simple and interesting option how to quickly make a flower bed in the form of daisies out of a wheel. For work, you will need several tires and a sharp knife. In general, the work will take no more than half an hour. The step-by-step workflow looks like this:

1. All tires are cut in half.
2. Form a figured fence in the shape of a flower.
3. Fill up the ground and plant the plants.

Form the core of chamomile from flowers. Alternatively, it can be laid out in the form of a circle from a material such as plastic bottle(bottoms to the top) or stone.

Flowerbed chamomile from a tire

If you approach the process of creating flower beds from tires creatively, original ideas will not keep you waiting. Answers to questions: is it worth it to use additional plastic material, how and with what to paint the wheels for a flower bed and what to end up planting in a flower garden, there are along the way.

Cache-pot parrot

To create an original planter in the form of a parrot from an old wheel, you will need the following materials:

• tire with small radial tread;
• a strip of iron for a clamp;
• washers, nut, bolt;
• spanners;
• drill.

Cache-pot parrot

The work is done in the following order:

1. With a knife, symmetrical cuts are made in the tire 2/3 along the bead ring.
2. The side part and the protector are cut at a distance of 1/3. For the most part separated side part through a triangular cut.
3. The cover is turned inside out.
4. Cut out the bird's beak from the side.
5. A smaller part of the tire is cut along the entire length (the cut should be slightly larger than the size of the future beak).
6. Using a clamp, insert the beak and compress the halves.
7. Drill a hole with a drill.
8. The halves of the head are pulled together with washers, nuts and bolts. (To make the head narrower than the body, part of the tire must be cut off).
9. On the larger side of the tire, a tail is cut out.
10. Paint the workpiece.
11. A collar is made from an iron strip, with which the sides of the cache-pot are pulled together (as an option, an ordinary rope can be used).
12. Color the parrot completely.
13. Hang the pots on a rope or fasten with wire to a horizontal structure.

How to turn a tire

It will take some effort to turn the tire inside out. To facilitate the work, it is recommended to make large cuts - up to the tread. First, turn one side out, then, slightly flattening the tire into an oval, do it completely.

If the forces are still not enough, you should cut the part of the flower bed opposite the petals in a circle to remove the steel cord. True, in this case there is a risk that the design will not keep its shape well enough.

Tire work

How to cut a tire

You will need a sharp knife to cut the tire. First, a small hole is made in the tire. Then a cutting tool is inserted into it and the material is cut according to a pre-made markup. The knife should be periodically dipped in water or machine oil. This will greatly simplify the task.

How to paint flower bed wheels

When the design is ready, it remains to paint. To do this, the surface is completely degreased (for example, with acetone or white spirit) and allowed to dry.

The surface can be additionally primed, but this condition is not necessary, since even without this the paint adheres to the rubber quite well. The painting process itself is no different from similar work on another object.

Planting flowers and care rules

Having dealt with the question of how to make a tire out of a car wheel and how to properly cut and overlay everything, it's time to understand what is best to plant in a flower bed of tires. Of course, there is no clear instruction as to which flower is best placed in flower beds made from tires made by one's own hands.

Tire with flowers

Nasturtiums look no less bright. But, when planting this flower in flower beds made of tires, it should be remembered that the culture does not tolerate transplanting very well. Accordingly, nasturtium should be placed at a permanent place of growth in the form of swollen seeds or ready-made seedlings in peat cups.

In addition, you can plant marigolds, verbena, violas and other not too whimsical flowers.

It is allowed to plant in homemade planters and perennials. It can be chrysanthemums, carnations, daisies, decorative bow and much more.

The main condition is that the flowers planted in tires should be unpretentious and require minimal care.

No matter how interesting the idea is, and no matter what variety of flowers is planted in an impromptu flower garden, the structure itself should be placed in such a way that access to it remains free. This will ensure that the plants are properly cared for. Only in this case, the use of tires as flower beds will be justified.

As for the care of flowers, it largely depends on what is specifically planted, and does not differ from the manipulations performed with a similar plant planted in open ground or flower pot.

Concluding the conversation about how you can make a flower bed out of a wheel, it is worth noting that such a constructive solution as part of the creation of landscape design has a number of undoubted advantages:

• flowerbed durability;
• good tolerance to temperature changes;
• practically zero financial costs;
• high level of aesthetics.

Rubber is a very malleable material, and the question should not be how to make a flower bed out of a tire (especially since it is very easy), but which variant of a flower garden is better to make from a multitude.