Mirror films with one-way visibility combine two properties - privacy and sun protection. The Silver metallized film provides excellent daytime privacy, but the one-way visibility effect changes at night as there will be more light in the interior than outside. The mirror effect will be reversed and the side of the film with the most light will become a mirror. Neighborhood film is perfect for a home where you want privacy during the day without blocking much of the sunlight. Additional curtains or blinds will correct the properties of the film at night. Facades of buildings from the street have an attractive appearance while reducing cooling costs due to efficient heat dissipation. In addition to the usual Silver, you can choose films with an additional color: Blue, Green, Gray, Gold, Bronze.

Silver mirror film not only provides privacy from neighbors during the daytime, removes glare and excess light, but also has excellent heat-shielding properties, so that the interior of your home or office building will be comfortable and cool. One Way Mirror Silver rejects about 99% of UV rays, helping to reduce fading on your precious furniture or other UV-sensitive items. Mirror film reflects up to 82% of all solar energy, keeping your room at a pleasant, moderate temperature and reducing energy consumption for cooling.

Mirror film, which is pasted over windows, consists of high quality polymers. It increases the strength characteristics of glass surfaces, protects the interior of the room, not allowing ultraviolet light to enter. Window tinting is a great way to keep cool inside the apartment, keep prying eyes from the outside, completely preserving the privacy of your personal life.

Mirror self-adhesive film: protecting windows and rooms from the sun, how to properly stick on windows

Mirror film on windows is increasingly common, not only in business premises, but in private properties. This device has many advantages.

The composition has an important ability that determines its intended purpose - it captures ultraviolet radiation, does not let it into the rooms. Solves the problem of overheating of the internal space of houses, the windows of which face the south, east sides.

Important! Properly done toning saves electrical energy, when the room is not heated, there is no need to use air conditioning.

Advantages of Mirror Film

Self-adhesive product, has many color solutions, differs in the level of dimming. The essence of its application remains the same - it protects the rooms from the penetration of a large amount of heat inside, protects the glass surface from destruction.

Safety from prying eyes

When a person passing by looks inside, he will see his own reflection. This property of the material is appreciated by consumers, protects privacy against outside intrusion.

The property is lost when electric lights are turned on inside. Thick curtains used in the evenings will help correct the situation.

Improves the performance properties of glass

Increases the performance of the glass surface:

• increasing the strength of the glass surface;
• protection against accidental breaking;
• in case of violation of integrity, the canvas remains fused, it is held by the composition;
• reduces the risk of injury and cuts.

Enough light for indoor work

Inside the rooms, a sufficient level of illumination is maintained, which makes it easy to go about your daily activities. There is no need to use additional sources light (before dark). Using raw materials is a great way real savings electrical energy, which distinguishes it from curtains that completely darken the interior of rooms.

No sun glare or reflections

The composition of the sun-protection type completely removes the sun glare that appears on the screens of computers, laptops, TVs. This allows you to work or relax, without unpleasant discomfort, unnecessary stress for the visual organs.

Stylish design

There are many varieties of tinting material with different colors, invoice. Raw materials are suitable for any interior, skillfully complementing it, emphasizing individuality.

Material disadvantages

In addition to the advantages, it has a number of disadvantages that should be considered.

Flaws:

• it is impossible to regulate the intensity of the penetrating light;
• defense against prying eyes possible during the day, by the light of electricity, everything becomes visible;
• cold time is associated with minimal heating of rooms.

How to care for the mirror film on the window?

Manufacturers offer different variants similar raw material:

1. Reflective: reflects up to half of the sun's rays. The film differs in colors (green, blue, bronze, silver). It is budget-friendly, has an average level of efficiency. You can find raw materials with a high level of ultraviolet reflection.
2. Energy Saving: Protective option that filters heat. The material is fixed from the inside of the glass surface.
3. Shockproof: protects the plane of the window, reducing the likelihood of external damage, making it stronger. During the breaking, all the fragments simply hang.
4. Decorative: fights heat by changing the style of rooms. Models contain abstract drawings, geometric figures, natural motifs, stained glass surface. Sometimes people get a matte surface, this brings a certain element of sophistication. This option reflects the sun's rays unevenly.
5. Spatter: retains the sun's rays, infrared radiation, absorbs heat, reflecting it.
6. Architectural: some manufacturers distinguish it separately, although this is the name of any kind of protective raw material.

An important advantage of the tinting agent is that a properly glued product does not require special care. Glass surfaces are wiped with a damp cloth. They are easily cleaned with detergent, without the use of compounds containing abrasives, chemicals, acids or alcohol.

How to choose and stick a mirror film on the window glass?

Mirror film on glass is sold everywhere. To choose right kind should pay attention to the tips.

• when the windows of the house are to the south, east, you should purchase a product with high density. It must contain a minimum of 28 microns;
• buy products from manufacturers with a good reputation, a long work experience. A low-quality product will not fulfill its goals. During heating, the product is capable of releasing harmful chemical compounds, which will adversely affect human health;
• we must not forget about the need to equip window blocks with curtains. When the main lighting is turned on in the evenings, the film ceases to fulfill its function of protecting the space from prying eyes. Therefore, you should purchase beautiful, functional curtains;
• material can be applied from any side of the surface. Some manufacturers put models inside double-glazed windows to increase their strength characteristics (this method is implemented when the characteristics allow);
• gluing is carried out when the temperature does not exceed 35 degrees Celsius, the optimal interval is 25-30 degrees. This will allow the raw material to dry completely;
• to make the pasting process convenient, experts recommend first removing the double-glazed window.

Film editing is quite simple to manage, it is enough to have free time, invite an assistant.

Pre-prepare the necessary tool:

• scrapers;
• distillation;
• spray bottle with soapy water;
• stationery knives;
• spatula with a wide base.

Important! Work is carried out, from 5 to 35 degrees Celsius. Such conditions will allow the adhesive layer to fully dry. Humidity indicators can range from 20 to 80%, to increase the parameter you will need a sprayer.

Sticking scheme:

1. Wash the glass surface thoroughly using water with a few drops of baby soap, mild shampoo.
2. Measure the dimensions of the window.
3. Cut the material with a clerical knife: cut with 2 mm allowances. The material is allowed to join in width.
4. Moisten the work area with soapy water from a spray bottle.
5. Spread the product on a flat surface.
6. Gradually remove the protective layer.
7. Treat the released material with soapy water.
8. Attach the moistened film to the glass plane.
9. Smooth out from the center to the periphery.
10. While there is liquid under the raw material, its position should be corrected.
11. Use a spatula to remove moisture from under the material.
12. As it dries, the glass will lighten a little, become transparent. This process can take up to two weeks.

When the gluing technology is violated, various problems arise:

• the surface under the material dries instantly, which makes it difficult to spread it evenly, or remains wet for a long time: it means that the process goes without observing temperature regime(5-35 degrees of heat will be optimal);
• smoothing is done with a cloth, this creates difficulties, making it difficult to fully remove water from the inside. It is better to purchase a special scraper than to engage in re-gluing later;
• the surface of the glass was covered with small air bubbles (some people pierce them with a needle, after smoothing the plane). Correct installation avoids swelling. The problem arises due to the poor quality of pre-washing the glass, or insufficient dispersal of moisture, air;
• small bubbles are best left, without piercing with a needle. When their diameter is less than 3 mm, there is a possibility of further self-smoothing;
• when the perimeter of the protection peels off, this is evidence of the acquisition of a poor quality coating, without providing required level adhesion, or minimal moisture, glass smoothing.

If you are tortured by unbearable heat, stuffiness and bright light, if the sunny side of the housing is constantly heated to the temperature of a sauna in summer period, then a universal, simple remedy will help to solve all these problems - a sun-protection tint or mirror film.

She will be a real salvation in the hot summer season when it is difficult to hide from the sun even at home.

Currently, there are more than a dozen types of tint solar film for windows, which differ in the degree of darkening, density and method of gluing, as well as cost and service life.

The advantages of the film and how to install it

After sticking the mirror film, you will get the following benefits:

• UV delay by 98% - harmful rays will not enter the rooms, but the illumination will not change in brightness.
• The possibility of dismantling the product when not needed - after the end of the hot season, the film is removed (subject to certain conditions, which we will discuss later).
• Adequate lighting - now working at a computer or watching a movie will only be a pleasure and you do not have to constantly turn the screen from the sun.
• Protection from prying eyes in the daytime - the mirror surface will hide the entire room, and passers-by will not be able to look into your window. All they see is their own reflection.
• Reliable fastening of glass fragments - when the film is pasted, broken glass will not fall apart, and fragments will not fly into the apartment.
• IN winter time solar control film will serve as an obstacle to the release of heat - it will help to accumulate it more efficiently.

Installation of a mirror sun-protection film

If necessary, you can do the work on gluing the film on the windows on your own, however, if you have no idea how to glue the tinting on the windows of the apartment, it is better to use the services of professionals or at least carefully study the technology and each stage of such work.

For self-gluing the film, you will need tools such as:

1. Scraper,
2. Spray,
3. Stationery knife,
4. Soft detergent,
5. Soft rubber or plastic spatula.

The film has an adhesive base, that is, it is a self-adhesive product.

Before starting work, it is necessary to prepare the glass.

1. Cleaning glass from dirt with mild detergents.
2. Removing old stains and marks with scrapers. If there is adhesive left on the glass surface for plastic windows, you will need to use a metal or wooden tool to remove the compound.
3. After cleaning the glass, thoroughly wipe it dry. For this purpose, a towel made of any soft fabric, such as microfiber, is ideal.
4. After the preparatory work is completed, it is necessary to measure and cut the film, and then you can proceed to the direct installation of tinting, which is carried out in several steps:
5. Moisten the glass with soft, purified water with the addition of detergent, liquid soap or baby shampoo.
6. Release of the film from the protective layer.
7. Application of a sun-protection film on the window surface, uniform distribution of the material over the entire glass area.
8. If the edges go beyond the glass, they should be carefully trimmed with a knife.
9. Residual water is removed from under the glued film with a spatula.
10. The renewed window must be left to dry completely, which usually takes about a week.
11. After completing all the above steps, you will soon be able to enjoy high-quality tinting that will protect your home from the hot and bright sun in any weather.

Anyone can cope with the installation, even if you have never glued such products before, you just need to responsibly approach this task.

VIDEO INSTRUCTION

Disadvantages of a mirror surface

Consider the possible disadvantages regarding specifically the mirror coating.

• The film has a mirror surface on the side where it is lighter. That is, during the day it will be brighter from the side of the street and for passers-by the glass will be a real impenetrable mirror. But in the evening and at night you will have to use curtains or blinds, because now it will be lighter on your side and it will not be difficult for onlookers to look out the window, especially on the first floors.
• Another disadvantage is the difficulty of dismantling with proper gluing according to the instructions.

Otherwise, this method of sun protection can be considered universal. You will always be safe, keep your things from fading.

Reasonable cost is an added bonus.

1. Terms of work

Architectural and automotive films are NOT SUITABLE for outdoor installation!!! The film must not be exposed to direct atmospheric influences (rain, snow, direct solar energy). The film is installed from inside the room or car, on the inside of the glass. Armor films are placed on the side opposite to the possible impact. It is not recommended to install films inside a double-glazed window, and for some types of films, installation inside double-glazed windows is prohibited.

The air temperature in the room where the installation is carried out should be within +10 - + 40 C. At a temperature of less than 10 C, the curing time of the adhesive layer increases by 15 times. At temperatures above 40 C, the likelihood of damage to the adhesive layer increases.

Installing the film at sub-zero temperatures is NOT RECOMMENDED! During installation, after distillation of the installation solution, up to 70 grams of water per 1 m2 remains between the film and glass. At a positive temperature, this water evaporates in the process of gaining adhesion (gluing to glass) with a film within a week. At a negative temperature, this water will freeze, forming ice lenses that deform (stretch) the film. The resulting defects (bubbles, tacks) will become noticeable after the temperature rises and the ice melts.

When installing the film on the elements of external glazing in winter period it is imperative to monitor the temperature in the room. For example, if the film is installed on an external (remote) showcase, the temperature inside the showcase must be POSITIVE for at least five days!

Relative humidity in the room should be between 20 and 80%. If the humidity is less than 20%, the installation mortar will dry out too quickly. With a humidity of more than 80%, the curing time of the adhesive bond will increase.

A decisive factor for the high quality of the installation of films is the minimum dust content in the air. Therefore, work on installing the film in a building under construction (a room where repairs are underway) is carried out AFTER the completion of dusty construction works And fine finish premises. Before installation, it is desirable to carry out a wet cleaning, and during the installation process, irrigate the air in front of the glass with water from a spray bottle.

The light intensity should not be less than 200 lux to ensure visual control of the quality of the installation of the film.

2. Cutting films

Cutting is one of the most important preparatory operations in the production of work with film. Proper cutting can significantly reduce film waste, thereby saving material. Recall: the width of a standard roll is 1.52 m, the length (winding) is 30 m. The net area of ​​the film in a roll is 45.6 m2.

Before cutting, it is necessary to take the exact dimensions of all surfaces to be installed with the film, and draw up a cutting map. Cutting (with scissors or a clerical knife) each specific piece of film, form it in size over size glass by 2-3 centimeters (per side). This overlap (reserve) will allow you to guarantee that the entire surface of the glass is covered. Excess film is cut off at last stage installation.

3. Tool used

With small amounts of work, improvised tools can be used as tools. In this case, you will need: ammonia glass cleaner, scissors, stationery knife, rubber spatula with a smooth working edge, water spray, paper napkins.

4. Installation procedure

Glass preparation. Even if the dirt on the glass is not visible at first glance, know that they are there!
Dampen the glass with the installation solution, applying it with an automatic sprayer or household sprayer. Recommended Solution Recipe: For 1.5 liters of water, 2-3 drops of Johnson & Johnson Baby Shampoo or Fairey Detergent
When using improvised means, try to wash the glass as thoroughly as possible with an ammonia cleaner and napkins. If the glass is not cleaned well enough, then after installation, inclusions and foreign bodies (dust particles, hairs, etc.) can be found under the film.

Moisten the entire surface of the washed glass again abundantly and evenly. Spray water in front of the glass to neutralize dust in the air.

Remove the protective anti-adhesive layer (thin transparent "liner") from the prepared piece of film. The easiest way is to peel off the "liner" at one of the corners of a piece of film. To do this, stick a piece of adhesive tape on the corner on both sides and pull them in different directions. As the transparent “liner” separates, immediately moisten the entire surface of the opening adhesive layer by spraying water on it. The film must be completely wetted. The water (installation solution) temporarily neutralizes the adhesive, allowing the film to move across the glass surface. During the separation of the “liner”, it is important to prevent the film from “creasing” and sticking to itself.

Holding the film by the upper corners, bring it with an adhesive layer to the glass. In this case, the film should not come into contact with the window frame, window handles etc.

Place the top corners of the sheet of film against the glass and fix (smooth) them. Lowering down the bottom corners of the film, allow it to stick to the glass. Spread the film over the glass surface, avoiding the formation of wrinkles and creases. When applying even minimal force to the film, it should slide easily through the water.

Align the film along the perimeter of the leaf, leaving a gap not exceeding 2 mm between the window frame (bead) and the edge of the film. We recommend positioning the film so that there is a gap between the window frame and the top and left edges of the film sheet. This will allow you to trim the film cut with a margin (2-5 centimeters per side) only on two sides - on the right and bottom.

Moisten the surface of the installed film again. Water will provide easy sliding of the distillation (scraper or rubber spatula) and will not allow scratches to form if hard specks get under the distillation.

Proceed to smoothing the film and forcing (squeezing out) the installation solution from under it. Start work from the central upper part of the canvas. Move the forcing (scraper or rubber spatula) from the center to the edges, from top to bottom. First with light movements, then gradually increasing pressure. Movements should be short (with an amplitude of 20-25 centimeters). Start each movement from the place where the film is already pressed. Under the surface of the installed film, there should be no air bubbles and water "lenses".

After the central part of the sheet of film is smoothed, go to the edges. Cut off the overlap (excess film that extends beyond the edge of the glass) with a clerical knife, forming a gap of 1-2 mm. This gap is necessary for the exit of the installation solution. Squeeze out the water with short forcing strokes perpendicular to the edge of the film. Tip: for more efficient removal water protruding from under the edge of the film, wrap the distillation with a paper towel - the escaping water will be absorbed into it.

If defects (blotches, dust particles, hairs) form under the film, remove them as quickly as possible. To do this, gently lift (peel off) the film in the direction from the edge of the sheet to the defect, remove it, moisten the opened glass area again, and return the film to its original position. Tip: if unwanted inclusions small size or not very noticeable, then it is better to neglect its removal. Such aesthetic defects only affect appearance installed film and do not affect its physical characteristics. And when you try to get rid of unwanted inclusions (by peeling off and re-applying the film), you risk getting several at once instead of one mote. This is due to the fact that when smoothed by distillation, the film becomes electrified (magnetized) and begins to attract dust from the air. And as a rule, attempts to get rid of such defects lead to the need to redo the entire canvas. Try to install the film with one approach.

The time to reach the maximum adhesion strength of the film to glass at room temperature is 2 weeks (for a film of 112 microns). During this time, the remains of the installation solution come out and evaporate.

5. Operating conditions of the film.

It is forbidden to wash the film within 5 days after its installation in order to prevent moisture from getting under the film and causing water lenses.

It is forbidden to use abrasive cleaning pastes, hard brushes, newspapers and other materials that can leave mechanical damage (scratches) for washing glasses.

Films must not be exposed to high temperatures, chemical solvents and substances containing them.

It is forbidden to stick self-adhesive applications on film coatings.

Permissible operating temperature range of films: -30°C to +70°C.

After 5 days from the date of installation, the film can be washed with cleaning agents that do not contain abrasives (“Mr Muscle”, etc.)

If the operating conditions are observed, the service life of the film exceeds 3 years.

6. Features of the installation of armored films.

When installing armored protective films (thickness from 112 microns.), Temporary formation of bubbles and water lenses is possible. This is due to the fact that as a result of the action of capillary forces, at the end of the installation, an installation solution (liquid) remains under the film in an amount of up to 35 g/m2. Full adhesion of the film (gluing the film to the glass) occurs within 4-8 weeks. During the adhesion process, the remaining liquid diffuses through the edge zone of the installed film. As the fluid self-removes (within 4-8 weeks), the bubbles and lenses will resolve themselves. If after 8 weeks the bubbles and lenses do not disappear, then they are considered unacceptable defects and the film is subject to reinstallation under warranty.

If you follow these instructions, you will succeed.

9731 0 0

Pasting windows with a film: what does it give and how is it done

Few people want to become the hero of the show "Behind the Glass". But life in own house or on the ground floor of a high-rise building does not exclude such a possibility. The reason may be ordinary forgetfulness or simply unwillingness to curtain windows during the day. But you can solve this problem once and for all, and self-adhesive window film will help to do this.

I have such a need arose from the moment the tenants moved into the house built nearby. And with it, the need to study the types of films and how to stick them.

Which film to choose

In principle, I am a rather prudent aunt, and I took care of sun protection when I ordered new windows. They are energy efficient and have a UV filter. And the tulle on them is an excellent remedy from prying prying eyes.

But not so long ago we were lucky enough to buy a plastic one at a decent discount. front door. Glazed. But completely transparent. Since a door of non-standard sizes to order would cost twice as much, this one was taken without cavil.

In fact, there are two problems: neighboring windows opposite and visitors, who are not always welcome, but there is no opportunity to pretend that we are not at home. They see us. And it is necessary that we see who is standing behind the door, while remaining invisible ourselves. Explained clearly?

Here is a mirror self-adhesive film that would just cope with this task: uninvited guest will admire only his own reflection, and in the meantime we will make faces behind the glass. With the lights on, of course, it will not work, but in the evening we curtain the windows and close the first door leading to the veranda.

Yes, that's how bad we are. But closer to the point - it's time to choose a film and learn how to glue it. Because calling a specialist for such a volume of work is simply ridiculous.

Sunscreen

Sunscreen films (including automotive films) are the most popular. With their help, you can:

• regulate penetration sun rays into the room, as they have different degrees of transparency.

• It's lovely curtain and upholstery protection upholstered furniture from burnout, and domestic plants - from the aggressive effects of ultraviolet rays.
• As well as the ability to maintain a comfortable air temperature in the room, as they reflect UV rays from the street and infrared heat from the room, allowing you to save on air conditioning and heating.

Decorative

Self-adhesive film on windows can be colored, mirrored, matte, stained glass, have an ornament or pattern on the surface.

Protective (anti-vandal)

Such films are multifunctional, and can protect not only from light and prying eyes, but also from specific actions. Namely:

• From fragments. Even if the glass is broken, it will not shatter into small pieces capable of causing significant injury. Relevant for families with small children;
• From penetration. In general, glass sealed with a film is very difficult to break, especially if you choose a material of the highest protection class A3 0.6 mm, capable of withstanding an impact force of 9.5 J or 182 kg / cm 2. The maximum that an attacker can achieve is the appearance of cracks on the glass. There are also thinner films with not so impressive characteristics: A1 0.24 mm thick and A2 0.412 mm thick.

• From the vibration of sound waves. Simply put, you can protect yourself from wiretapping with your own hands. It is unlikely that ordinary people need this - just for information.
• From a bullet from a pneumatic or traumatic weapon. Also, just in case.
• from the spread of fire. If the glass breaks in a fire, the film will not allow outdoor air to enter the room, so the flames will spread at a slower rate.

We don’t have small children, we don’t have enemies either, but you can protect the glass door from breaking. Therefore, we choose a protective mirror film without a decorative pattern with a metal coating.

By the way, it can be aluminum, titanium, bronze, nickel and even silver, the price and color depend on the type of deposition, and strength, light transmission and quality depend on its density and the number of film layers.

Self-sticking

Since I always glue the wallpaper in the house myself, I think I can handle this job, since sticking a film on a window is only a little more difficult. And the technology is very similar. Of course, if you take out the glass, process it, and then put it back in place, it would be easier, but I won't risk it.

Preparation

TO preparatory work This includes cleaning, creating the right environment, and preparing everything that is needed in the process itself.

I didn’t make a reservation about cleaning: before work, you really need to not only thoroughly wash the glass so that there are no stains and streaks left on it that will be buried under the film, but also make sure that dust does not hover in the air. Settling on the glass and the adhesive base of the film, it both worsens the quality of gluing and spoils the appearance.

Therefore, in addition to wet cleaning it is advisable to periodically humidify the air at the window from the sprayer. In any case, the surfaces to be joined must be wetted, so this will not harm.

Cleaning to be done throughout the room

• Another spray for soapy water;
• Detergent or baby shampoo;
• Stationery;
• Soft spatula for smoothing the film;
• Paper towels or microfiber towels.

It remains to make sure that the air temperature in the operation area is above five and below thirty degrees- this is required by the instructions so that the glue does not dry too quickly, but not too long.

Performance

The first thing to do is to thoroughly wash the window or door on both sides using a mild detergent, rinse it and rub it until the streaks disappear.

Then we unfold the film and pretend to cut to get less waste. If the glass is large, it must be measured in advance and try to find a film of the desired width in order to avoid joints.

• We add baby shampoo, Fairy or other detergent to clean water - two or three drops per half liter is enough to ensure that the film slides over the surface. Just do not shake the mixture strongly - we do not need foam at all. Pour the working fluid into a spray bottle.
• For gluing an anti-vandal film, an ordinary soap solution may not be suitable.. Therefore, we look at the instructions, which describe the preparation of a working solution capable of dissolving the adhesive base.
• We cut off a piece of the desired size from the roll with a small allowance in length and width, and only after that, laying it on a flat surface, remove the protective layer from the adhesive side, wetting the freed surface from the spray gun with soapy water. From it we spray glass.
• Now about how to glue the film on the window glass. It must be carefully and slowly lifted, holding the upper edge, and applied as accurately as possible to the opening. Slow - because sudden movements often cause the film to fold, and it sticks to itself. It is almost impossible to unstick the glued areas without damaging the material, this piece will simply have to be thrown away.

• If this step is done without excesses, it will be easier further, since the film slides well on wet glass, it can be moved to the desired position. And only after that you can begin to expel water from under it.
• If you know how to glue wallpaper, then you know perfectly well how to stick without bubbles: for this, smooth movements with pressure are performed with a spatula from the middle to the edges. And in order not to scratch the film, the spatula must be moistened with water. The squeezed liquid is wiped off with a soft cloth.

• Now you can cut off the excess film - it will no longer budge.

All. It remains to wait for complete drying. This will take from two weeks for a regular film, up to 3-4 months for a protective film. . During this time, it is better not to touch the surface. even if bubbles appear on it. They will disappear on their own.

But then no precautions are needed, the glass can be washed, wiped as usual. They say that cleaning windows with film is even easier than without it.

Conclusion

The video in this article shows the entire gluing process in detail and it seems that nothing can be easier. But it only seems. If I had to paste over all the windows in the house, I would invite specialists without a moment's hesitation. Because of one door, it’s somehow embarrassing to disturb people, I’ll try it myself.

And, of course, I will be grateful to those who have already successfully completed this task, and will tell in the comments about the nuances that may arise in the process.

September 22, 2016

If you want to express gratitude, add a clarification or objection, ask the author something - add a comment or say thanks!