Balcony doors made of plastic have firmly entered the everyday life of a modern person. They are strong enough, reliably protect the room from cold and dust, do not need painting and complex care. The handle for a balcony door should be sufficiently wear-resistant, withstand temperature extremes, high humidity and exposure to ultraviolet radiation, and also have a comfortable handle.

Varieties of balcony handles

Depending on the purpose, there are several categories of handles for PVC balcony doors:

Material and appearance

The most popular option is a plastic balcony handle. This is a fairly wear-resistant and reliable option for home use. In places of mass visits, metal fittings are recommended. Well-known manufacturers use alloys of aluminum, steel, and brass. Metal pens are available on the market in a wide variety of colors - shades of silver, gold, bronze and others.

For those who prefer luxury in the interior, models with handles richly decorated with glass, ceramics, and wood are suitable. If you need a simple white pen, you can purchase a metal structure covered with durable plastic using a special technology.

Handles differ in the shape of the handle. There are models specifically for blinds, where the handle is located very close to the sash. In some cases, curved handles will be a convenient option.

Latches for balcony doors

There is one more element that should be considered when installing balcony latch handles. different designs. Their function is not to lock the door, but to fix it in closed. If you press on the door or pull the handle, the latch gently pops out of the groove and the door opens.

There are several types of latches:

• Fale. The door is fixed with a latch tongue. The set comes with a special handle with which the door opens.

To fix the door with a latch from the outside, a stationary handle is required.

Installation of different types of handles on PVC doors

Installing the handle on balcony door made of plastic does not require special knowledge and skills, and the bare minimum is required: screwdrivers, a drill with drills, a screwdriver.

Mounting a one-sided handle

A one-sided handle on the balcony is usually installed in cases where the old one has broken, which must first be removed. The sequence of actions in this case is the same as with.

After that, we proceed directly to the installation:

1. We insert the handle into the hole and bring the locking mechanism to the “open” position. To do this, turn it until the sash opens.
2. Then take out the handle and insert it in a horizontal position.
3. We twist the screws to the stop. A loose handle wears out faster.
4. We close the fastener with a decorative strip.

Mounting a double-sided handle

So that the door can be opened and closed from both sides, it makes sense to tinker and install an asymmetric two-sided model.

If the balcony is located on the lower floors and is not protected by bars, a double-sided handle can make it easier for thieves to gain access. In this case, it is advisable to think about additional protection.

The installation process consists of the following steps:

Installation of stationary handles

Stationary handle-petal or shell - very easy to install. by the most important point is the location of the handle. Before installation, you should apply it in different places and choose the most convenient position. After that, we drill two holes for the mounting bolts, fasten the handle and close the fasteners with decorative caps or a plug.

Latch Installation

If there is a smoker in the family, a latch is a good option for fixing the door from the outside. It should be installed if there is a petal or shell on the outside. This simple device will ensure tight closing of the door and protect the room from cold and tobacco smoke.

Mounting the magnetic latch

This variety has a clear advantage over the rest: the absence of friction between the elements of the mechanism ensures a long service life. In addition, even if the door sags, the magnetic latch continues to securely fix it. The door closes completely silently.

The installation of the latch consists in screwing the magnetic plate onto the door frame, and the reciprocal metal bar onto the end of the door. Usually, the holes for fastening the slats coincide with the holes of the standard door hardware. First, we fasten the plates loosely and check how the latch works. After making sure that everything is in order, we twist the fasteners to the end.

Mounting the roller latch

Sometimes apartment owners prefer to install a latch in the form of a roller on a plastic door, which, when closed, enters the groove on door frame. The disadvantage of this mechanism is that when the door sags, it will have to be adjusted, and possibly remount the striker.

Installation is carried out in a similar way. The plate with the roller is attached to the end of the door, and the striker is attached to the door jamb.

To understand all the intricacies of installing a latch on a balcony door, we recommend watching the video.

To use the balcony was easy and pleasant, you need to carefully consider the door locking system and the functionality of the door handles. And, of course, the fittings should match the style of the room, be beautiful and comfortable.

Considering that the mechanisms small parts on fittings tend to break, a properly selected double-sided handle for a balcony door will help get rid of many problems. It is necessary to install such products if the balcony is glazed and additionally reinforced with special gratings, as well as protecting mechanisms from breaking.

Pros of pens

Such a product is most often of the usual form and is connected using a metal rod. It is very convenient to use such pens, in addition, they have many positive characteristics:

• the mechanism is taken as a basis, which is made of durable metal;
• there is a large selection of handles with different designs and materials: plastic, glass, and ceramics;
• the locking mechanism of the handle functions smoothly, and the sash closes hermetically;
• the material is resistant to temperature changes;
• installation is carried out on a profile that has a different width.

Cons of pens

The disadvantages of such a system include:

• this option does not ensure the safety of the home, especially if it is located on the lower floors;
• when choosing a handle for a balcony door of this type, it is necessary to equip them with additional anti-burglary mechanisms;
• the handle on the outside makes it impossible to install a mosquito net.

Most people install the product only from the outside of the balcony, so you need to know how to install a double-sided handle, as well as what types exist.

Types of double-sided handles

Balcony handles are divided into several types: stationary and movable. The first type has the only function, which is to open and close the door. The second type is associated with the castle system. In addition, they are divided into rotary and pressure. They differ in the method of installation, some can be done by the overhead method, and others by the mortise.

Related article: What are putties on metal surfaces and their features

There is a separate type of product that has handles on both the front and back sides. They are designed for mounting on balcony doors.

The range of such products is varied. They differ in shape and color. It is necessary to choose in such a way that they fit the balcony block from a design point of view. The most common door handles are those with a locking mechanism, as well as shell handles and pull handles.

Features of choice

The lock with a key on such a handle is only available on the inside

A double-sided handle with a locking mechanism must be the same color on both the inside and outside. It may also have a lock with a key that closes the balcony. But, such an installed mechanism is available only from the inside, so that it cannot be opened from the outside. This is practical when there are small children in the house so that they can go to the balcony without being accompanied by adults.

This mechanism has a common element that needs to be replaced - this is the rod that connects the handles. To fit both handles on it, the rod has an elongated shape.

For installation, you need to drill several holes, which are necessary for:

• exit of a long rod;
• placement of a self-tapping screw that fixes the handle on the inside;
• fixing the handle from the outside.

Performing this process, you need to prepare: a screwdriver, drills for working with metal, as well as a curly screwdriver.

Before installing a double-sided handle on a balcony door, it is necessary to measure the thickness of the door profile in order to correctly select the length of the rod. This is important to ensure the perfect operation of the mechanism.

Double-sided handles increase comfort of use. There is no need for someone to close the door for those who went out onto the balcony or open it if they closed behind you.

Handle replacement

Almost every owner has in his arsenal a set building tools. To install or replace handles, you must have:

1. screwdriver;
2. hacksaw for metal;
3. electric drill.

Whatever doors are made of, the handle has always been, is and will be one of the main types of fittings. Next, we will analyze what handles for plastic doors exist, go through the materials for handles and tell you in which cases certain models are installed, and home craftsmen will learn how to put a handle on a plastic door with their own hands.

Door handles for plastic doors have a fairly wide range, but each model is designed for its own purposes.

The question of how to install a handle on a plastic door is certainly important and we will analyze it thoroughly, but you need to install a specific model, so first we will study what it offers modern market in this niche.

There are several types of plastic doors, the gradation depends on the installation site, purpose and dimensions of the product, respectively, before fixing the handle on the installed door or changing it on old doors, you need to pay attention to the type of doors. We will not go into details, we will list only 3 main directions.

1. Entrance doors- they are extremely rare in apartments and private houses, they are mainly placed on shops, offices and public buildings, which means that the handle must have high mechanical strength and be easily replaced;
2. Balcony blocks and doors for terraces- the massiveness and resistance to burglary of such blocks is lower, mainly attention is paid to the level of tightness and decorative component. Handles with locking mechanisms predominate here;
3. Interior doors- lightweight constructions with the same light latches and locks. Heavy duty heavy duty handles interior doors out of place, the emphasis is on matching the interior and the convenience of everyday use.

Before you replace or put the handle, you should pay attention to the type of plastic door

Now let's look at what are handles on plastic doors :

• Stationary model- stationary plastic door handle is in no way connected with the locking mechanism, such a handle is rigid installed on the door leaf and is intended solely to be pulled or pushed by it;
• One-sided push model- as you can understand from the name, such plastic door handle installed on one side only. It differs from stationary models in that it is structurally connected with the locking mechanism; in order to open the doors, you need to press the handle. These models predominate in balcony blocks;
• double sided push model – double-sided handle for plastic doors differs from the aforementioned one-sided model only in that 2 identical lever handles are mounted on both sides door leaf, but at the same time, both push handles are part of the same locking mechanism, they work synchronously and fixing their elements are the same.

There are several hundred models of handles for plastic doors, but they all belong to one of the 3 types

Design differences

Within each type of handles, there are often several separate subspecies, so in the stationary direction, 2 types of structures are distinguished:

• Strong and powerful handles on plastic entrance doors are in the form of brackets and are made of metal. The configuration and layout of such handles may vary, but they always come in pairs and are installed on both sides;
• The stationary shell handle is usually attached only on one side and in balcony blocks it acts as an auxiliary element paired with a one-sided push handle. The meaning of such a tandem is that the lever handle is connected to the lock, and on open balconies this is not always convenient.

The shell pen has a couple more names - this is a petal and a smoker's pen. The first option is a related model and, unlike the shell, has an even hook shape, and the shell is called a smoker's handle because it is installed on balconies and allows you to close the door when you go out for a smoke break.

Push handles also have several varieties. In this case, it all depends on the type of locking mechanism. If a standard lock with a cylinder head and a traditional latch is installed, then classic lever handles go to it.

But in the balcony blocks, where the ventilation mode is provided, they usually put window-type handles that move around the central axis and are set in accordance with the selected mode.

A window push handle is installed on a plastic door when the door system has several modes of operation

Installation of different types of handles on PVC doors

For an ordinary layman, installing a handle on a plastic door with your own hands seems like something sky-highly complicated. The abundance of mechanics, the possibility of adjustment and several modes of operation of the structure scare away.

Often people do not even know how to remove the handle from a plastic door, not to mention how to change the handle or install a new one. Meanwhile, everything is not as difficult as it might seem at first glance. But first, let's say a few words about the materials from which handles for plastic doors are made.

Although the door profile is made of polyvinyl chloride (PVC), handles made of the same plastic are rare. In fact, the only common plastic model is the petal and some of its variants.

Budget models of lever handles are made of light alloys based on aluminum, popularly called silumin. These products are not expensive, they look quite decent, but they do not last long. Light alloys quickly break down and can no longer be repaired.

Cheap silumin handles often break and cannot be repaired.

The most durable are steel handles and models made of bronze or copper alloys. To protect against corrosion and give a respectable appearance, steel is usually coated with a layer of chromium or nickel, but the price of such products is higher.

The compromise is powder coating and polymer coating. Bronze and copper alloys do not need additional protection and decor. Lightweight and durable aluminum handles are priced midway between expensive non-ferrous metals and more affordable but heavy steel.

Highly loaded stationary handles for plastic doors are made mainly of steel

Installation of stationary handles

We have 2 types of stationary handles - an arc and a shell. An arc or an office handle for a plastic door is included in the kit, which includes 2 identical handles, 2 fixing bolts and installation instructions.

The handle for plastic doors in the form of an arc is most often used in office structures.

If there are no holes for the handle on the doors, then you will have to drill them yourself. The instructions must indicate the center distance, and you need to focus on it when marking. The diameter of the drill is taken 1 mm larger than the diameter of the fixing bolts.

When choosing the place for installing the handle and marking, it must be taken into account that the double-glazed window goes inside the profile by about 25 - 30 mm, so the indentation must be done more so that the double-glazed window does not touch when drilling the profile.

From a foreign tool, you will need a pair of 13 mm open-end wrenches, and a wrench for tightening the mounting washer comes with handles.

• Initially, 2 fixing washers and 2 nuts are put on each bolt. You need to unscrew a couple of nuts and remove one washer;
• After that, a bolt with one fixing nut is inserted into the hole on the outside of the doors;
• On the inside of the doors, put on the second fixing washer and screw both nuts;

The outer and inner mounting washers differ in that the inner fasteners have side holes for the key that comes with the handles.

The bolt is inserted into the hole from the outside of the door

• Do not fit the nuts to the mounting washer tightly so that the bolt dangles slightly, after which you need to take 2 open-end wrenches and lock the nuts together;

Nuts must be tightened

• Now take the outer handle and attaching it to the fasteners, you begin to alternately screw the fixing washers into both parts of the handle;

• Then follow exactly the same procedure, only with the inner handle. At this stage, all actions are performed exclusively by hands, no keys are used;

• After you have screwed the mounting washers into the inner handle, return to the outer arc and use your hands to fit the washers on it as tightly as possible;

Additional adjustment of mounting washers

• At the last stage, the handle is tightened using the included wrench. To do this, the L-shaped key is inserted into the side hole on the mounting washer and the washer is rotated. Tightening is carried out alternately, until it stops.

Final tightening of the fixing washer on the inside of the doors

From stationary handles, shells are still mounted on plastic doors; compared to the instructions described above, this kind of door hardware is much easier to install.

• To screw the shell to the doors, you must first attach the handle to the intended installation site and mark the entry points for the screws;
• Then remove the handle and make 2 holes according to the marking, the diameter of the holes should be a couple of millimeters smaller than the diameter of the self-tapping screws;
• Now it remains only to attach the handle and screw in the screws with a screwdriver;

Of all types of handles, shell attachment technology is considered the simplest.

You can do it even easier - take metal screws (with a drill at the end), insert them into the handle attached to the doors and use a screwdriver to drive the screws without any preliminary drilling.

Installing lever handles

pressure door handles for plastic doors are installed at the stage of assembly of the structure, that is, at the factory. This is due to the fact that the handle is built into the locking mechanism. Therefore, in this case, we can only talk about how to replace the handle on a plastic door.

• Initially old pen you need to install in the final position - open, so it will be easier to get to the fasteners;
• The fixing screws on such handles are covered with a decorative trim and this trim is located on top of the base of the handle. You need to take the edges of the lining and slightly pulling it towards you, turn the lining 90º;

You need to rotate the decorative trim 90º

• After turning the cover, the fixing screws will open for you. The screw heads are made for a Phillips screwdriver. Next, take a screwdriver or screwdriver and unscrew the screws;

Unscrew the fixing screws on the old handle

• Dirt often collects under and around old handles, a replacement will be a good reason to wash all these deposits;
• Turn the new handle to the same position in which you removed the old one - openly with a 90º turn of the decorating overlay, after which you insert it in place of the old one;

It is necessary to prepare and try on a new pen

• If you made the right choice and the base fits perfectly into the old holes, then you just have to insert the previously unscrewed screws into these holes and fix the handle with a screwdriver or a Phillips screwdriver;
• The last chord will be the return of the decorative overlay to its original position and the testing of the new handle. Below in the video in this article, the process is clearly shown.

Screwing the new handle in place of the old one

Installation of a double-sided handle on a balcony door

Do-it-yourself double-sided handles on metal-plastic doors have to be installed when the owners, for some reason, ordered a design with one rotary handle from the inside.

Luckily this problem is fixable. For installation, you only need a good screwdriver, two drills (5 mm and 10 mm) and the actual paired handle itself for entrance or balcony doors.

If you are worried that with the help of a paired handle, unwanted guests will enter the apartment through the balcony, then you can buy a handle With lock. The handle there is equipped with a separate lock, which, when closing blocks the rotation of both handles.

If plastic can still be used as the base of the rotary structure, then the handles and the core of the paired handles are made exclusively of metal

• As in the case described above with the replacement of a one-sided push handle, the first thing you need to do is move the system to the open position and turn the decorative trim 90º to unscrew the fixing screws with a screwdriver;

Dismantling the rotary balcony handle

• The diameter of the central hole into which the core of the paired handle enters is 10 mm. But the core is square and in order not to spoil the locking mechanism with a large drill, we take a 5 mm drill and drill a through hole through the main hole until the drill exits from the reverse side;

A through hole needs to be drilled.

• Now you need to remove the 5 mm drill and insert a 10 mm drill into the tool;
• On the reverse side, we drill a small hole up to 10 mm. When drilling, you need to be very careful, we drill only plastic, not reaching the metal locking mechanism;

Reciprocal hole reamed up to 10 mm

• Next, we insert the core into the locking mechanism and put a new handle on it;
• The handle is attached similarly to the old one, so we apply the base to the plane of the doors and circle the entry points of the self-tapping screws with a pencil;

Marking for holes for installing the bed

• Basically, the bed for mounting screws has a diameter of about 10 mm, which means that we need to take the same drill and drill a couple of holes according to the marking so that the bed falls into place;
• Any locking mechanism of this kind is adapted for mounting handles on both sides, which means that there are already sockets for mounting screws inside the lock, the main thing here is not to touch the base when reaming the plastic;
• There is one more nuance, double-sided pens are sold with a deliberately long core. The fact is that the thickness of plastic doors can be different, and a long core can always be cut with a grinder or a hacksaw, respectively, you need to measure the door leaf and cut off the excess from the core;
• At the last stage, the core is inserted, handles are screwed on both sides with screws, and the screws are covered with a rotary decorative plate.

Push handles are available in two versions

We talked in detail about how to screw the handle to a plastic window-type door, these mechanisms are designed not only for opening and closing the door leaf, they are able to work in several modes, including ventilation.

There are also lever handles for plastic doors with an English-type lock, they come with a lock and are installed on the front doors.

They change in much the same way as window handles, the only difference is that you don’t need to drill anything there, just buy a model with similar mounts and replace the old handle with a new one. To do this, you only need a screwdriver.

Handles for English type locks are installed on the lock plates and are easily changed with a screwdriver

Nuances of operation and common breakdowns

In operation, handles on plastic doors are no more difficult than their sisters, who stand on metal and wooden doors. Swivel mechanisms must be lubricated with engine oil at least once a year, and fasteners must be tightened on stationary models.

But the question of how to repair a handle on a plastic door requires a separate story, because a screwdriver alone is often not enough to repair. The video in this article shows one of the options for such a repair, in addition, you will find detailed information on how to fix the handle and the balcony door in general.

Conclusion

We tried to tell in as much detail as possible about the existing models of handles for plastic doors and dispel the myth about the allegedly difficult installation, replacement and repair of such fittings. We hope that after studying the material you will not have problems with the choice and self-installation any handle on a plastic door.

6436 0 0

Which balcony handle is better: 4 popular types + repair and replacement

You may not even notice how often you use the handle on the balcony door. It can be one-sided and two-sided, with a lock, "shell", with different types locking systems. And it doesn’t matter if you have a plastic balcony handle, or a ceramic one, you need to be able to repair or replace it if necessary. I will talk about the types of balcony handles, as well as the features of their replacement, in this article.

Most popular types

Handles can be divided into two types:

1. Stationary. They are not connected to the lock, and most often they are only needed in order to pull on them so that the door closes or opens. They can be made in the form of a bracket, "shell" and other shapes.

In the photo - plastic brackets without locks and latches

1. Movable. They are connected to the door lock, can be rotary or push.

In addition, handles differ in shape, color, material from which they are made, installation method (for example, mortise or overhead). Of course, the main quality should be convenience - this accessory should fully cover the needs of the owners in terms of functionality. But also a handle on a plastic balcony door can become a real work of art and complement the apartment.

View 1: double-sided

If you do not need to open / close the balcony from the side of the loggia, a one-sided handle is best. But you can also choose a two-sided option, it will be more convenient to use the loggia with it.

The basis of such handles is most often a strong metal mechanism, which provides the solution with strength and durability. It is important that the closing grooves are of high quality and made of materials that are not sensitive to corrosion.

Installing a double sided handle will take more time and skill than a single sided one, so if you are inexperienced or necessary tools It is better to entrust this work to professionals.

The double-sided handle on the balcony door is more convenient to use. But from a security standpoint, it's not the best option, since the door can also be opened from the side of the loggia.

Instructions for installing a double-sided model:

1. Carefully remove the standard handle from the door.

1. We drill the profile of the door through with a thin drill. As a result, we have three holes at a distance of 2-3 cm from each other.
2. We take off the hardware. This can be done by unscrewing the fixing screws.

1. The central hole (out of 3 pre-marked with a thin drill) must be drilled with a drill with at least 8 mm.
2. After that, we measure the required distance for the fasteners from the central hole (this can be done by attaching the fastener to the profile and making notes). Then, with a drill with a diameter of 6 mm, we drill two mounting holes.
3. Install the hardware in place. We install the handle, tighten the fixing screws and mount the plugs.
4. Installation completed!

Approximately the same procedure must be followed if the handle is broken on the balcony and needs to be replaced, I will talk about this in more detail below.

If, after installing a new handle, there are problems with the seal: it touches or the door closes worse, simply cut off the excess part of the seal in the area of ​​\u200b\u200bthe mounts with a knife.

View 2: brace

This handle is installed on balcony doors not only in homes, but also in offices, shops, etc. Most often this metal structure, which is attached to the profile in two places using brackets, but there are also plastic varieties.

It is difficult to install locking mechanisms directly on the bracket, so it makes sense to mount it on those doors that are already equipped with a reliable latch.

Kind 3: smoker's pen

The model, which allows you to keep the doors in the closed position without slamming, has received the symbolic name "smoker's handle". Going out onto the balcony, you can only slam the door slightly, and smoke or cold air will not get inside the apartment. This mechanism is equipped with a magnet.

In this case, the structure will remain in open position, and to exit, you will only need to lightly push the door.

View 4: "toffee"

If you installed a one-sided model on the balcony, then there may be a problem with exiting the loggia, because the handle will only be from the side of the apartment. In this case, you can mount a special "petal" on the outside of the door to close or open the door from the outside.

It is also called "toffee", because it performs only this function, or "shell". This element can be made of aluminum or plastic, as a rule, parts are made to match the color of the door or loggia (the most popular colors are white or brown).

How to choose a balcony handle?

Models for a balcony door can be made not only from metal or plastic, but also from glass, cermet, fiberglass.

Inside the structures, fittings designed for plowing are used. In addition, the mechanism can be additionally equipped with a lock and other mechanisms that protect against unauthorized access.

This is especially true for residents of the first floors and families with children, as the lock will protect the house from burglars or prevent kids from accidentally opening the door.

What qualities should the fittings have:

1. Resistant to temperature changes. It is often colder on the balcony than in the apartment, especially in autumn and winter, so plastic, metal or other material should not be affected by temperature changes. It is also desirable that the coating of the product does not fade due to sun rays, this is especially true for those whose loggia overlooks the sunny side.

1. Moisture resistant. If condensation forms on the door, the fittings should not suffer from rust.
2. Ease of operation of the locking mechanism. The simpler the interaction with the lock from the side of the apartment, the better. Going out to the loggia to hang clothes or enjoy beautiful scenery, you do not want to fiddle with the locking mechanism for a long time.

Replacement + repair

Sometimes the handles break. Depending on the complexity of the damage, they can either be repaired by hand or replaced. In case the product began to hang out, it is worth checking whether the self-tapping screws are screwed tightly.

For this you need:

• turn the handle to the "open" mode (so that it is parallel to the floor);
• squeeze a rectangular plug over the screws;
• turn the mechanism 90 degrees;
• weakened fastener heads that “hide” behind the plug must be screwed with a Phillips screwdriver;
• then return the plug to its place;
• check the performance of the design.

How to change a broken handle:

1. We place the handle in the “open” position, slightly remove and turn the plug.

1. We unscrew the screws, take out the product.
2. We insert a pre-sized structure into the prepared holes from under the previous handle, screw in the screws.

1. We fix the decorative cap.

1. Checking the operation of the door.

Conclusion

In the article, I talked about the most common types of handles for a balcony door, and also shared tips for replacing and repairing them. I think now it will not be difficult for you to choose the right part, replace or repair it. You will find more visual information in the video in this article. And I'm waiting for questions in the comments - write!

The quality of fittings plays a key role in the operation of a plastic door. It is the small parts and mechanisms that most often break down and require replacement. Choosing the right handle will help to avoid many problems. Is the double-sided handle suitable for installation on a balcony door?

Types of door handles

Balcony handles are divided into stationary and movable. Whereas the only function of the fixed handle is to be pulled to open the door, the movable model is linked to the door lock. Such handles are divided into rotary and push, and according to the installation method, overhead and mortise can be distinguished among them. A separate view is the double-sided handles, which look identical on both sides of the structure. This part is designed for installation on those plastic doors that open from two sides, for example, balcony doors are often equipped with them.

Advantages of double-sided handles

Disadvantages of double-sided handles

If you take the issue of ensuring the safety of the apartment seriously, then it is not advisable to install handles on both sides of the balcony door. This is especially true when the balcony is located on the lower floors. In this case, the fittings must be equipped with special mechanisms that protect against hacking. But if the balcony or loggia is reinforced with bars or roller shutters, then the choice of a double-sided accessory is fully justified. Moreover, there are double-sided handles with keys that greatly complicate the process of entering the house.

If you decide that a double-sided pen - best option for you, you just have to choose and install it correctly.

How to choose the right double-sided pen

• It is better to purchase a universal handle that is suitable for profiles 50-70 mm thick;
• It is best to purchase accessories from German or Austrian manufacturers. Such a pen will cost you a little more, and outwardly it will not noticeably differ from Chinese counterparts, but you will feel the difference in six months, when the Chinese pen needs to be replaced, and yours will not cause any trouble;
• The material from which the pen is made is an equally important criterion when choosing it. For example, you can prefer plastic fittings to metal, resistant to different weather conditions, durable and reliable. Before making a purchase, it is necessary to familiarize yourself with the characteristics of the material in detail;
• If the material of the handle is a matter of choice, then the mechanism must definitely be made of metal. Moreover, a metal mechanism can also “let us down” if it is made of fragile silumin - this dubious material is very fond of Chinese manufacturers, whose products will not last long;
• The handle must match the general style of the window in color, and if window construction contains other fittings - you will have to find a handle from the same series, otherwise you will not be able to avoid visual dissonance.

Steps for mounting a double-sided handle

You need to carry out the work as carefully as possible, performing all the steps consistently and accurately.

First of all, prepare everything you need during installation:

• double-sided handle;
• screwdriver;
• drill;
• cutting machine;

Mounting process:

The variety of options for balcony handles allows you to choose the most convenient model for both sides of the door and for any operating conditions. The double-sided handle has a row competitive advantage, forcing an increasing number of buyers to choose it.