How to put a metal picket fence horizontally. How to install a picket fence yourself. Fence from eurostudent fence "olimp premium" produced by the company "zavodzaborov"

A metal picket fence is a modern alternative to a wooden counterpart. Material - sheets of galvanized steel. The fence from it can stand up to 50 years.

Fence from metal fence This is an excellent protective design and at the same time beautiful.

The installation of such a fence is in many ways similar to a wooden one and does not cause difficulties, and various ways of fastening the planks allow you to build a canvas that is unique in appearance.

Users often search:

To get the strips, steel sheets are rolled by a special press, giving them a relief. After that, strips of the same width and length are cut. The blanks are covered with a protective polymer layer, painted.

The material is called "Euro-stick" because it is produced on European equipment in compliance with European standards.

Planks differ in shape, profile, coating, metal thickness. We will analyze the features of each type separately.

By shape

They have a flat or curly top. The latter results in unusual beautiful fences. In addition, the edges of the slats are rolled (bent) or not.

Photo: metal fence "under the tree".

When choosing a picket fence for a fence, it is better to give preference to rolled edges, since they cannot be cut, which simplifies installation. But such strips are much more expensive than those with raw edges.

By profile

U-shaped (rectangular). It has a longitudinal profile. The number of ribs or grooves may vary depending on the manufacturer. For a fence, a rectangular profile is considered rigid enough, which has at least 3 stiffeners, and the edges are rolled.
M-shaped. The shape is longitudinally profiled in the center. The most durable profile option. The reason for this is the large number of ribs. Often produced with this particular profile, rounded top and wide rolled edges.
Semicircular. Due to the complexity of production, it is expensive. Rigidity is sufficient, but additional grooves can be formed to increase it.

Photo: U-shaped and M-shaped picket fence.

The more stiffening ribs a metal profile bar has, the more stable the material is in bending length.

Upgraded picket options have 6, 12, 16 ribs.

The standard height of the strips is from 0.5 to 3 m, the width is 8–12 cm.

If it is decided to install a double-sided checkerboard fence, where there are practically no gaps, then it is recommended to take material with an M-shaped profile and rolled edges.

By metal thickness

It happens from 0.4 to 1.5 mm. With an increase in the thickness of steel, the cost of the structure and its service life increase.

For a metal picket fence, the optimal metal thickness is 0.5 mm with a length of up to 2 m.

By coverage

The canvas has a protective zinc layer, but is also dyed, which can be:

Polymer. Reliable coating. It is made under production conditions on special equipment. Subject to the technology, such material can withstand any mechanical loads, temperature changes. Even if damaged, the surface does not rust, it lasts a long time. Depending on the manufacturer, the warranty for polymer coating ranges from 10 to 20 years. Large selection of shades.
Powder. Such a fence is cheaper, but the quality of the coating is lower. Of course, subject to step by step technology it can last up to 10 years. But often this is neglected by many manufacturers and applied on top of the metal that is not protected from corrosion. powder paint. As a result, at the slightest scratch, the surface begins to rust.

Unfortunately, when buying outward signs it is impossible to determine the quality of a powder coating, so it is better not to pay twice and immediately buy a picket fence with a polymer layer of protection.

In addition, you can paint the strips yourself. To do this, you need roof paint and an airbrush.

If you want a fence with a unique picture and texture, you will have to buy factory material.

Photo: powder coating is used as a protective material

A picket fence made of metal imitating wood is gaining popularity. There are shades:

walnut;
cherries;
bog oak;
aspens;
cedar and others.

A good coating allows you to recognize the metal only at close range.

Pros and cons of such a fence

Advantages:

Long service life. The average service life of products exceeds 20 years.
Resistance to moisture, temperature extremes, corrosion.
Does not need care. Dirt is washed off the surface by the pressure of water from a hose.
The factory metal fence does not need to be painted.
Large selection of colors that do not fade in the sun.
Beautiful appearance.
Strength, resistance to mechanical damage.
The price is lower than for similar planks made of wood.
Does not require pre-treatment, cutting, grinding.
Unlike corrugated board, it provides good air exchange, transmits light to the site.
Does not require repair.

Flaws:

Before proceeding with the fastening of the shtaketin, you need to accurately calculate the step with which it will be mounted. The slightest mistake will spoil the fence externally.
When buying material with non-rolled edges, there is a high risk of injury during installation and during use.

For the construction of the fence, it is better to involve an assistant, so you will significantly reduce installation time.

Methods for fixing shtaketin

If the design is needed for reliable protection at home and located on the street side of the site, we recommend that you consider that:

To install a blind canvas and completely close the estate from prying eyes, you should buy pickets more than 1.8 m long, placing them from the ground at a distance of 3–5 cm.
If the visibility of the territory is not important to you, then it is enough to purchase strips 1.5 or 1.25 m long and fix them with gaps.

Now consider what methods of fixing the picket fence are used more often.

Vertical

The generally accepted option for mounting strips. For construction, you do not need to know special instructions and attach additional transverse logs to increase the rigidity of the structure.

Each plank is fixed in a vertical position to the lags with self-tapping screws or rivets. You can do this with gaps in one row or arrange a blank canvas in the form of a checkerboard fence.

Horizontal

Not as popular as the previous type, but if you follow the instructions, the fence will come out no less attractive.

Installing shtaketin horizontally is much more difficult. You will need to mount additional poles, which often have to be of a non-standard shape. If this is not done, then the slats will begin to sag, which will lead to deformation of the entire structure.

And an increase in the amount of materials for construction is an increase in the total cost of the fence.

Checkerboard

Another name is double row. The planks are mounted to the transverse lags on both sides so that they overlap each other by at least 1 cm. To do this, the step between the stripes is made slightly less than their width. The fence turns out to be almost continuous and what is happening on the site is visible only from a certain angle.

For a completely blank canvas, it is necessary that the pickets overlap each other by half.

The disadvantage of a checkerboard is the consumption of material per 1 running meter increases by 50%.

In one row

An economical option for fixing pickets, since the strips of material are fixed in one layer. Often gaps up to ⅔ of their width are left between the planks, but this is not critical. The step between the elements may be larger, or they are attached closely.

The disadvantage is that due to the gaps, the area remains completely visible.

Interesting top design options

Most common:

Less common is the design of the upper line in the form of a pyramid, wings.

An addition to unusual spans will be a stone or brick plinth.

Calculation of the amount of material for the fence

It is carried out at the design stage of the structure. The future structure is schematically depicted on paper. The total length, the number of support pillars, transverse logs are determined.

You need to calculate how much picket fence you need after you have determined the height of the fence and the size of the installation step.

The volume of fasteners also depends on the amount of material. When fixing with self-tapping screws on 1 bar, a minimum of 2, and preferably 4 self-tapping screws is required.

Do-it-yourself metal picket fence installation steps

Let's consider the procedure for assembling a fence with pillars made of shaped pipes on a strip foundation. We will need:

welding machine with a protective mask, electrodes;
galvanized self-tapping screws (ordinary iron ones will quickly rust);
bayonet shovel;
profiled pipes for poles with dimensions of 60 * 60 cm;
pipes for horizontal logs - 2 * 4 cm;
roulette;
plumb;
formwork boards;
cement, crushed stone, sand;
concrete mixer or construction mixer;
cord;
screwdriver;
screwdriver.

The entire amount of work can be done alone, but it is much easier to handle the process with two, so find an assistant if possible.

Foundation

Upon completion preparatory phase you can start marking. It is carried out with the help of wooden pegs and a rope. Pegs are driven into the ground at the locations of the supports, and a rope is pulled between them.

The foundation for such a fence is not only tape. But this type is more reliable, more durable and suitable for massive structures.

Pillar installation

If you have chosen metal poles, remember that they need a protective treatment against corrosion, and to make them more beautiful, it is recommended to paint them to match the picket fence before installation.

lag mount

Square or rectangular pipes are taken as transverse logs and welded to the posts.

On sale there are supports with ready-made holes for the logs. Then fastening is done with bolts.

Photo: We weld logs to metal poles

For fences up to 1.5 m high, two logs are enough. At a higher height, it is better to increase the quantity to three pieces. In this case, the fence will cope well with any wind loads.

The top of the pillars, the edges of the lag are protected with plugs, you can use plastic ones. So, moisture will not get inside the pipes.

Metal picket installation

There are 2 options for fixing the straps:

Self-tapping screws. It is worth taking only galvanized ones, otherwise ordinary ones will begin to rust after the first rain. Each plank from both edges is fixed with self-tapping screws to horizontal lags. If there are two lags, then 4 screws are enough for 1 bar. When there are 3, you need 6 screws. The number of fasteners may be less, but in this case the fence can be easily disassembled. The advantage of self-tapping screws is assembly speed. The disadvantage is that they are easily unscrewed, which makes it easier for intruders to enter the site.
Rivets . The principle of installation and the number of parts is similar to the previous type, but takes more time. At the same time, it will be possible to disassemble the fence only from the inside of the site, and the outer part of the structure remains completely protected.

Regardless of the type chosen, all fastener elements are matched to the color of the fence.

For a transparent fence, the planks are fixed at a distance of up to 5 cm, for a deaf fence, they must overlap each other by at least 30%.

Popular manufacturers

Below are the 4 metal fence manufacturers whose products are most often bought.

grand line

The company is popular both on the Russian and European markets. It produces various products from metal profiles, PVC:

corrugated board;
metal tile;
siding;
fence;
spotlights;
drainage systems;
facade panels;
seam, composite roofing.

All products are certified.

TPK Metal Roof Center

Produces and sells building materials.

Eurostudent is made of steel with a thickness of 0.5 mm. The edges are folded. Phyto-resistant (does not fade in the sun), does not rust. Each plank is wrapped in foil. The service life of products reaches 50 years.

All goods are certified.

EugeneST

The group of companies makes and sells:

metal tile;
thin sheet steel with a polymer coating;
corrugated board;
metal siding.

LLC "YujinST" produces a metal fence under its own trademark "Barrera".

Kronex

The production association has its main office in Belarus and many subsidiaries in neighboring CIS countries. More than 15 years of experience in the production building materials, including a metal picket fence. All products are sold under the Kronex trademark.

By creating a metal picket fence, you get a beautiful, durable structure that does not need maintenance and perfectly protects the site.

A fence made of a metal picket fence (or euro picket fence) is one of the best picks today in terms of aesthetics, practicality and value proposition. It can be made in various color scheme, different profile, with imitation natural wood, with a straight and semicircular cut. Also possible various design fencing sections: from rectangular to arcuate. In our company you can order a turnkey metal picket fence in any configuration you desire. Thanks to our own production and trusted suppliers, we will produce high-quality fencing for you in a short time and with a 2-year warranty.

Why do site owners choose a metal picket fence?

Practicality Such a fence is a reliable barrier against intrusion, prying eyes, as well as the negative impact external environment. At the same time, due to the gaps between the shtaketins, normal air circulation in the area is ensured.
Durability Fences made of metal picket fences have excellent resistance to any aggressive environmental influences: they do not rust, do not fade in the sun, and are resistant to sudden changes in temperature and precipitation.
Aesthetics Metal fence has a classic and aesthetic appearance. A fence made of this material ennobles the site and emphasizes the good taste of its owner.
Reliability A polymer coating is applied to the picket fence to protect it from corrosion. It is easily cleaned of dust and dirt, and individual pickets are easily replaced with new ones in case of damage.

The cost of a metal picket fence

Additional options:

Pillar concreting - from 600 rubles. for 1 piece
Buting of pillars with crushed stone - from 300 rubles. for 1 piece
Automatic sliding gates- from 70,000 rubles.
Decorative arcs for the entrance group - from 3000 rubles.
Monolithic strip foundation - from 2500 rubles. for the m.
Protective painting of the frame (3-component Certa enamel)) - from 150 rubles. for the m.
Brick pillars - from 9800 rubles. for 1 piece
Screw piles (76mm x 2000mm) - from 2500 per 1 pc.

A fence for giving from a metal picket fence fits best into the image of a corner for relaxation. Simple and unpretentious in form, it is very suitable for fencing the site, and for the front of the house. This sample of a metal fence is still relatively uncommon on the market. But for the construction of the euro picket fence (metal picket fence), there are already several options for arranging fences with excellent design and interesting implementation.

Beautiful hedge of a private house

The use of metal elements as the basis of the fence, supporting pillars or piles for fencing household plots and summer cottages has long been known. But here is a metal picket fence as the main material of spans - the idea is relatively new and quite interesting.
The picket fence is a shaped metal strip with stiffeners, holes for fastening.

Fencing with brick pillars

The dimensions of these bands may vary slightly depending on the specifications manufacturer. The basis of production is rolled galvanized steel or profiled sheet with a thickness of 0.8 to 2 mm.

The length of the slats, depending on the purpose of the fence, can be from 0.25 to 2 meters.

In the assortment of manufacturers there are the following varieties:

unpainted galvanized material;
painted monochromatic appearance of the panels;
types of picket fence under a tree;
shaped types;
anti-vandal types of material.

And this is just one of the varieties.

Variants and their forms

Fences made of metal picket fence or euro picket fence are just one of the types of fences. In fact, the types of metal picket fence include:

made of profiled galvanized steel;
pieces of structural reinforcement, square, circle or strip up to 25 mm wide;
strips from a profile pipe of different sections;
coated.

Each of the presented types of material has its own characteristics both in terms of installation and in the form of the profile of the plates, the shape of the upper part, and the method of fastening.

According to the shape of the strips made of sheet steel, the most popular type of material among summer residents, they are:

semicircular shape;
U-shaped;
M-shaped;
rectangular shape;
strips with rolling ends;
classic.

decorative hedge option

For those who decide to make a picket fence with their own hands, the following points will be important:

On the websites of large manufacturers for a picket fence, a calculator will allow you to calculate all the necessary structural elements, including fasteners.
The consultant will help you find necessary information and tell you how to calculate individual nodes and elements.
How to choose the right project, choose the material and how to do the basic operations, photos of the most successful fences with a metal picket fence will tell you.

Coloring methods

A fence made of unpainted metal plates is much cheaper than those with polymer-coated plates.

Unpainted elements are painted:

paint brush by hand;
using a compressor or atomizer.

Painting is done in two or three stages: the first is a primer, the second is enamel painting, the third is varnishing.

Possible variety of colors and patterns

Types of such fences

Among the possible types of classifications of fences, it is worth highlighting:

according to the method of mounting the frame, supporting pillars and slats;
by type of base and supporting pillars;
by the type of filling sections between the columns.

Mounting methods

Installation of a fence made of a metal picket fence has several ways of attaching the slats to the frame of the fence. In one case, the technology provides for mounting on transverse strips, how it is attached. In another case, you can mount a metal picket fence on the frame in special seats.

Vertical checkerboard

A metal fence for a house with a sparse arrangement of plates is installed on a slatted base of two slats - upper and lower. This installation option is universal, it can also be used under the fence "", when the plates are installed in a checkerboard pattern.

Dimensions and distances

The design elements are taken into account:

the total size of the building - length,;
the size of functional elements, such as a gate, metal picket gates: their width and height, number of leaves and opening method;
supports, their size and method of installation.

Multicolored variant

When calculating how to make a metal fence and how much material it will take, you can take as a basis standard version, the scheme of which provides:

span width - 2.5-3 meters;
height - 2 meters;
the number of transverse logs per section 40x20 mm - 2 pieces;
support from a pipe 60x60 mm, 3.2-3.4 meters high;
the number of units of material 100 mm wide with a sparse version with a gap of 80 mm with double-sided fastening - 12 pieces per 1 linear meter.

The fence goes well with brick pillars.

Infill types

The calculation will be incomplete without the fact that the options for filling spans can make their own adjustments to the final calculation. Fill types include:

direct single barrier;
double-sided installation option;
installation at an angle;
installation at an angle bilateral;
installation of the type of blinds made of metal material;
single installation with profiled sheet back (used mainly for gates);
non-standard scheme with a change in the angle of inclination.

The photo shows a beautiful fence.

Newly completed fence installation

Mounting Features

So, how to make a fence from a metal picket fence with your own hands, you need to figure it out in detail. Fences, gates and wickets made of a checkerboard picket fence have a wider gap between the plates. This is done by using elements with a width of 10 or even 12 cm. In this case, the calculation and installation must be done as accurately and accurately as possible so that all distances are maintained both in the width of the gap and in the height of the installation of the plates.

Beautiful hedge option for a private house

To install a metal picket fence, you will definitely need a screwdriver with a set of bits, an electric drill with drills and a level. The presence of these tools, the ability to work with them and determine the features of the installation of all elements.

Installation

How to make a fence from a metal picket fence? The best option of a prefabricated structure, a fence made of a metal picket fence protrudes on screw piles. For a more ceremonial version of the fence, a fence with brickwork as the base and decoration of the pillars can become. For both cases, universal techniques and methods of work are used, shown in the video of the installation of supports and the frame.

Installation is pretty fast

Base device and frame installation

According to the layout of the site, a line for installing a fence with a place for entrance gate and gates. Further work is under construction according to the plan:

Installation sites are marked.
The foundation pit is torn off for the foundation of the supports.
Concrete pillars and foundation spans.
The crossbars are welded to the metal of the pillars.
The frame is being painted.
Brick pillars are being erected.

Installation scheme of the fence

The frame for the fence is shown below in the photo. It can also be mounted on piles.

Installation work

span set

A set of spans begins with marking using the level of the mounting points of the plates.

The first plates are installed from the edges of the span at the same distance from. The distance between them is divided by the number of planks and the equal spans between them.

Another mounting option

The installation of each element is carried out after checking the distance in the upper and lower parts between the plates. The double version is installed first from the outside, and then from the inside. For more information about the set of spans, see the video.

Metal picket fence (Euro picket fence)- one of the most popular types of fencing for a cottage, a private house or a summer residence. Outwardly, it is a symbiosis of the classic wooden fence and a modern eurofence made of metal. It has various options installation of shtaketin and coloring, which allows you to add individuality and beauty to your fence.

The price of a metal picket fence with installation

The company "ZABORIA" provides services for the installation of a turnkey metal picket fence. We offer a comprehensive approach from project development to finished fencing. High quality, huge selection beautiful options fences, a guarantee of up to 3 years and minimum prices from 1050r. p/m. All products and technologies of Zaboria are patented and comply with GOST state quality standards.
Below are some examples of finished fences.

We offer special minimum possible prices for metal picket fences with turnkey installation in Moscow and the Moscow region - Economy option. The price already includes: materials and installation. Delivery of materials to the object is calculated separately.

Installation of a metal picket fence with customer materials from 320r. p/m.

Complete set and installation

EQUIPMENT

pillars- profiled pipe (50x50 mm., 60x60 mm., 80x80 mm.), thickness 2 mm.
lags- profiled pipe (40x20 mm., 40x25 mm.), thickness 1.5-2 mm.
The available width of the eurostudent is from 70 mm. up to 118 mm. Maximum height 2.5 m. Possible coating: plain (galvanized), plain paint, polymer coating (powder).

INSTALLATION

The pillars are driven in to a depth of 1.2 m. They are compacted with soil, bottled with crushed stone and sand or concreted at your choice. The distance between the posts is 2.5 m.
The joists are welded to the poles. For fences up to 2m high. two horizontal logs are fastened per span, more than 2 meters 3 or more logs.
The fence is attached to the joists with RAL screws of the same color. The distance between the plates at the choice of the customer.
Plugs are installed on top of the pillars.

The installation time for a fence made of eurostudent is about 30 - 40 p / m, in one working day.
When ordering a fence in our company, delivery by our transport is required, the cost is from 25 rubles / km.
On an individual basis, we will develop a fence project specifically for your requirements.

Additional options

Name	price, rub.	Unit
Primer "GF-21", color: gray, red-brown	12	p/m
Painting (color RAL6005, 8017,9002,7000)	44	p/m
Painting (color silver)	57	p/m
Powder coated RAL - 8017, 6005, 7040	58	p/m
Powder coated RAL - non-standard	69	p/m
Screw pile galvanized 76x108x1500 mm.	2200	PC.
Monolithic strip foundation 250x400 mm.	2300	p/m
Brick pillars 2000x380x380 mm.	10 500	PC.
Brickwork 215x240 mm.	1 520	p/m
Gate (Pillars 80x80 mm., Frame 40x20 mm.)	from 2 756	PC.
Gates (Pillars 80x80 mm., Frame 40x20 mm.)	from 4 138	PC.

Choice of metal fence

To maintain the declared high quality of our products, for the construction of metal picket fences, we use plates only from reliable and leading Russian manufacturers. Picket fence from China does not always contain required amount zinc in the alloy, which means that corrosion resistance may be minimal.

We offer the following options for metal plates with a number of advantages, including: elevated level stiffness, favorable price, high zinc content.

GRAND LINE

M- and P-profile
Width: 100 mm.
Profile height: 16 mm.
Stiffeners: 10 pcs.

CROWN

M-profile
Width: 116 mm.
Profile height: 18 mm.
Stiffeners: 12 pcs.

ECONOVA

P-profile
Width: 100 mm.
Profile height: 19 mm.
Stiffeners: 12 pcs.

NOVA

P-profile
Width: 118 mm.
Profile height: 19 mm.
Stiffeners: 14 pcs.

Fence Configurations

The ZABORIA company offers a huge number of decoration options and a creative approach to the construction of metal picket fences. You can order the unit with any shape and arrangement of plates, choose an individual color or surface texture. We will help to make the design of the fence as suitable as possible for the style of your house, cottage or cottage.

Picket fence location
Option A. The picket fence is attached to the outside of the fence. At a distance from each other. The greater the distance, the greater the clearance of the fence.
Option B. The fence is fastened on both sides of the fence in a checkerboard pattern, forming an almost blank fence. Clearance only at a certain angle.

Figure 1. The location of the fence on the logs.

Figured execution of the upper part
Very often, our customers order a fence with a figured execution of the upper part of the fence. There are a lot of options, but the most popular ones are shown in Figure 2.

Figure 2. Variants of the figures of the top of the euro picket fence.

Sections of the top
We suggest choosing cuts of the upper part of the metal plates for the fence. The cost of such a service is not high, but it will give even more individuality to your fence.

Figure 3. Sections of the upper edges of the plates.

Color solutions
The most common colors of euro picket fences are shown in Figure 4. But you can also choose any of the possible 213 color solutions according to the RAL system. If monotonous colors do not suit you, we offer picket fence with textures, such as antique or golden oak.

Figure 4. Color options.

Samples of our work

Advantages of a fence from an eurostudent fence

Adjustable clearance level
One of the main properties of a fence made of eurostudent is the adjustment of the clearance level. Fences, as a rule, are located at a distance of 1 to 10 cm from each other. Thus, the fence can be made almost deaf. If this is not enough, then metal pickets can be placed on both sides of the log, which will make it not visible at a right angle, and all this without harming the blowing of the territory.
Reliability
A metal picket fence is not only beautiful and practical, but also has a high degree of vandal resistance. As an additional option, we can install anti-vandal fasteners to reduce the risk of dismantling the fence. If you wish, the upper edges of the picket fence can be given a pointed shape and it will be quite problematic to climb over such a fence.
Individuality
Unlike any other types of fence, such a fence has many decorating options and can be adjusted to any style and format of the territory.
Ease of maintenance
Fences made of eurostudent made by our company do not require almost any maintenance. A eurostudent with a polymer coating, serve for more than 20 years. In addition, in case of mechanical damage, the fence can be easily replaced with a new one.

Blowing the area near the fence is an important factor for summer residents. The fact is that normal and natural growth of plants and flowers is impossible near blind fences.

How to buy a metal picket fence profitably?

We carefully analyze our industry and the construction market as a whole. We look at what our competitors offer and what customers want, conduct surveys and read reviews. We have long concluded that fences made of cheap materials, even at a low price, do not meet the expectations of customers. For this reason, we have abandoned the use of cheap picket fences, and we produce components: logs, profiled pipes, poles and others on our own equipment. This approach made it possible to increase the quality of materials and reduce the cost of finished fences made of euro picket fences to the lowest possible in the region. "ZABORIA" offers:

A fence made of a metal picket fence, the price with the installation of which is the lowest possible in Moscow and the Moscow region;
Warranty up to 3 years, high service level;
A huge variety of installation options, configurations, coatings;
Opportunity to save significantly by taking advantage of temporary special offers;
High-quality installation, honesty and a reliable partner working in the construction of fences for over 20 years.

Reading time ≈ 4 minutes

A fence made of a metal picket fence is very relevant in our time, because it differs from other fences in that you do not need to spend big money on material and buy necessary tools. This fence has become relevant because it performs the function of protection (the construction of this fence is very easy, but penetration through it is not so easy, since the distance between the gratings is close, there are sharp tips), decor, ease and duration of use.

Do-it-yourself metal picket fence will give you great pleasure, as you not only save money, but also feel great pleasure from the physical labor done.

To build a fence, you need to think about all the details: starting from the perimeter of the fenced area, its appearance, the number of building materials and ending with the calculation of the duration of work.

Required Tools

To make it easier to understand the construction of a metal picket fence with your own hands, you can see the photo in our article or watch the video, which will help in this useful and enjoyable activity. To build a fence, you will not need many tools, but the necessary ones here will be:

earthwork tool. You will need it in order to install fence posts. You will also need a drill or an ordinary shovel (for digging holes);
apparatus for welding (to establish a transverse log to which the pickets will be attached). Welding will be the most the best option for this job (cheap, cheerful and reliable);
screwdriver (needed when installing the installation of a metal fence for the frame). A screwdriver can also be dispensed with here, but this will give you unnecessary worries;
an auxiliary small tool that all owners should have in their arsenal and will be needed to install a metal picket fence.

materials

To install a metal picket fence with your own hands, you must be provided with the following materials:

Pipe with a section of 60 x 60 mm (profiled). The design of this fence has a fairly low weight, so this section is quite suitable for you and can withstand wind loads.
A profile pipe with a section of 20 x 40 mm (needed for the installation of longitudinal logs, thanks to which metal pickets will be attached).
Metal pickets (produced at enterprises from steel with a thickness of 0.5-2.0 mm). The metal is coated on top with a special layer that protects against corrosion, then painted with paints in the idea of a powder.
Galvanized self-tapping screws (for attaching metal pickets to the frame).

Instructions for installing a metal picket fence

When you have collected all the tools and materials, you can proceed with the installation of a metal picket fence:

draw on paper a draft of your future fence, because based on your drawings, you will do the construction process;
install the frame (this is why we need a shovel or drill). We dig holes, the depth of which is 1000-1500 mm (the depth of soil freezing), in pre-marked places.

Between the pillars, it is necessary to maintain a distance of about 2.5 meters, since the structure will not be stable. It is advisable to make the pits for the pillars in the corners deep (they have a large load) and put crushed stone and sand on the bottom. The length of the posts must be calculated so that after you install them, the pickets are 100-150 mm higher. You should start the installation with the pillars in the corners and then pour the supports with a solution of cement, sand, gravel or just ready-made concrete from a mixer. With the help of the beacon cord stretched along the entire length of the longitudinal lag, you take the welding machine and weld it along the length of the frame profile pipes. Prime the welds. After, paint the structure and proceed to final stage installation.