Fence from eurostudent metal. How to install a metal picket fence yourself Do-it-yourself metal picket fence fastening

A fence for giving from a metal picket fence fits best into the image of a corner for relaxation. Simple and unpretentious in form, it is very suitable for fencing the site, and for the front of the house. This sample of a metal fence is still relatively uncommon on the market. But for the construction of the euro picket fence (metal picket fence), there are already several options for arranging fences with excellent design and interesting implementation.

Beautiful hedge of a private house

The use of metal elements as the basis of the fence, supporting pillars or piles for fencing household plots and summer cottages has long been known. But here is a metal picket fence as the main material of spans - the idea is relatively new and quite interesting.
The picket fence is a shaped metal strip with stiffeners, holes for fastening.

Fencing with brick pillars

The dimensions of these bands may vary slightly depending on the specifications manufacturer. The basis of production is rolled galvanized steel or profiled sheet with a thickness of 0.8 to 2 mm.

The length of the slats, depending on the purpose of the fence, can be from 0.25 to 2 meters.

In the assortment of manufacturers there are the following varieties:

• unpainted galvanized material;
• painted monochromatic appearance of the panels;
• types of picket fence under a tree;
• shaped types;
• anti-vandal types of material.

And this is just one of the varieties.

Variants and their forms

Fences made of metal picket fence or euro picket fence are just one of the types of fences. In fact, the types of metal picket fence include:

• made of profiled galvanized steel;
• pieces of structural reinforcement, square, circle or strip up to 25 mm wide;
• slats from profile pipe different section;
• coated.

Each of the presented types of material has its own characteristics both in terms of installation and in the form of the profile of the plates, the shape of the upper part, and the method of fastening.

According to the shape of the strips made of sheet steel, the most popular type of material among summer residents, they are:

• semicircular shape;
• U-shaped;
• M-shaped;
• rectangular shape;
• strips with rolling ends;
• classic.

decorative hedge option

For those who decide to make a picket fence with their own hands, the following points will be important:

1. On the websites of large manufacturers for a picket fence, a calculator will allow you to calculate all the necessary structural elements, including fasteners.
2. The consultant will help you find necessary information and tell you how to calculate individual nodes and elements.
3. How to choose the right project, choose the material and how to do the basic operations, photos of the most successful fences with a metal picket fence will tell you.

Coloring methods

A fence made of unpainted metal plates is much cheaper than those with polymer-coated plates.

Unpainted elements are painted:

• paint brush by hand;
• using a compressor or atomizer.

Painting is done in two or three stages: the first is a primer, the second is enamel painting, the third is varnishing.

Possible variety of colors and patterns

Types of such fences

Among the possible types of classifications of fences, it is worth highlighting:

• according to the method of mounting the frame, supporting pillars and slats;
• by type of base and supporting pillars;
• by the type of filling sections between the columns.

Mounting methods

Installation of a fence made of a metal picket fence has several ways of attaching the slats to the frame of the fence. In one case, the technology provides for mounting on transverse strips, how it is attached. In another case, you can mount a metal picket fence on the frame in special seats.

Vertical checkerboard

A metal fence for a house with a sparse arrangement of plates is installed on a slatted base of two slats - upper and lower. This installation option is universal, it can also be used under the fence "", when the plates are installed in a checkerboard pattern.

Dimensions and distances

The design elements are taken into account:

• the total size of the building - length,;
• the size of functional elements, such as a gate, metal picket gates: their width and height, number of leaves and opening method;
• supports, their size and method of installation.

Multicolored variant

When calculating how to make a metal fence and how much material it will take, you can take as a basis standard version, the scheme of which provides:

• span width - 2.5-3 meters;
• height - 2 meters;
• the number of transverse logs per section 40x20 mm - 2 pieces;
• support from a pipe 60x60 mm, 3.2-3.4 meters high;
• the number of units of material 100 mm wide with a sparse version with a gap of 80 mm with double-sided fastening - 12 pieces per 1 running meter.

The fence goes well with brick pillars.

Infill types

The calculation will be incomplete without the fact that the options for filling spans can make their own adjustments to the final calculation. Fill types include:

• direct single barrier;
• double-sided installation option;
• installation at an angle;
• installation at an angle bilateral;
• installation of the type of blinds made of metal material;
• single installation with profiled sheet back (used mainly for gates);
• non-standard scheme with a change in the angle of inclination.

The photo shows a beautiful fence.

Newly completed fence installation

Mounting Features

So, how to make a fence from a metal picket fence with your own hands, you need to figure it out in detail. Fences, gates and wickets made of a checkerboard picket fence have a wider gap between the plates. This is done by using elements with a width of 10 or even 12 cm. In this case, the calculation and installation must be done as accurately and accurately as possible so that all distances are maintained both in the width of the gap and in the height of the installation of the plates.

Beautiful hedge option for a private house

To install a metal picket fence, you will definitely need a screwdriver with a set of bits, an electric drill with drills and a level. The presence of these tools, the ability to work with them and determine the features of the installation of all elements.

Installation

How to make a fence from a metal picket fence? The best option of a prefabricated structure, a fence made of a metal picket fence protrudes on screw piles. For a more ceremonial version of the fence, a fence with brickwork as the base and decoration of the pillars can become. For both cases, universal techniques and methods of work are used, shown in the video of the installation of supports and the frame.

Installation is pretty fast

Base device and frame installation

According to the layout of the site, a line for installing a fence with a place for entrance gate and gates. Further work is under construction according to the plan:

1. Installation sites are marked.
2. The foundation pit is torn off for the foundation of the supports.
3. Concrete pillars and foundation spans.
4. The crossbars are welded to the metal of the pillars.
5. The frame is being painted.
6. Brick pillars are being erected.

Installation scheme of the fence

The frame for the fence is shown below in the photo. It can also be mounted on piles.

Installation work

span set

A set of spans begins with marking using the level of the mounting points of the plates.

The first plates are installed from the edges of the span at the same distance from. The distance between them is divided by the number of planks and the equal spans between them.

Another mounting option

The installation of each element is carried out after checking the distance in the upper and lower parts between the plates. The double version is installed first from the outside, and then from the inside. For more information about the set of spans, see the video.

The choice of fencing for the site not an easy task- it is necessary that it be reliable, durable, beautiful. All these requirements are met by a fence made of a metal picket fence (Euro picket fence). Climbing on it is problematic - not that rigidity. Breaking it is "boring" - usually, lovers of mischief are limited to bending a couple of planks. Beauty, of course, is a subjective criterion, but such fences look better than the same solid one. In addition, they are not so susceptible to wind loads, which saves on support poles. An additional plus is that they are breathable. In general, a good option.

What is a metal fence

The metal fence is made from galvanized steel sheet. A relief is formed on the sheet, after which it is cut into picket strips, covered protective compounds, is painted. Get strips of a certain height. Usually the height is from 150 to 180 cm. To complete the fence, you also need support poles (most often 60 * 60 * 2 mm), bowstrings (two or three crossbars that go between the poles) and fasteners.

Types, shapes, profiles

The thickness of the metal of the European fence can be from 0.4 to 1.5 mm. The most common is made of steel with a thickness of 0.5 mm. Fence width - from 80 mm to 128 mm, length - up to 2 meters.

P and M - shaped profiles of a metal picket fence

There is a metal fence with a different profile: P (rectangular), M-shaped and semicircular. M-shaped have more ribs, respectively, have greater rigidity. But there are also U-shaped ones, in which grooves are formed in the “back”. In this case, it is already difficult to say which of them will be tougher. Most likely, the latter, especially if it has rolled edges.

Semi-circular also have greater rigidity, but are more difficult to form and usually have a higher price. For greater strength, additional grooves can also be formed along the long side.

In general, the more grooves, stiffeners, the better the bar resists bending along the length. But with the complication of the relief, the price becomes higher. Since it is rather big in itself, you usually have to find a compromise. In any case, the bar must withstand your attempts to bend it.

What to look for when choosing

When you choose a metal picket fence, it is advisable to look at the party offered to you live. The same thickness of the metal can be declared, but in practice it turns out that the edge of the bar from one batch can be bent with a finger, with another batch such a trick fails. And this is from the same manufacturer. The point is the quality of the batch of metal, and it is rarely stable.

Rolled edge, several layers of protective coatings - these are the signs of a good metal picket fence

Also be sure to pay attention to the edges - it is better if they are rolled. First, it's more attractive appearance, secondly, the high rigidity of the picket fence, thirdly, the sharp edge is bent and it is impossible for them to get hurt. There is only one drawback with a rolling fence - a higher price, since special equipment and additional processing time are required.

If we talk about the products of specific companies, then the Grand Line (Grand Line), Barrera Grande, Nova, TPK Metalroofing Center, FinFold, UNIX (Unix) are popular.

Coloring methods

It is worth understanding the method of coloring. There is an iron picket fence with two-sided and one-sided painting. With one-sided, the back side is covered with a layer of primer without staining. Has, respectively, grey colour. Metal picket fence painted on one side, gray on the inside. It's not so bad - it's not conspicuous. If this option does not suit you, either buy with double-sided painting, or paint it yourself. The paint is taken “for roofs”, choosing the right shade. Note that the metal painted with a brush looks ... not very good. If there is an airbrush, the appearance will be good, although not ideal.

This is how the “wrong side” of a metal picket fence painted on one side looks like

It should also be noted that there are two types of coloring of a metal picket fence:

1. polymer coating;
2. powder paint.

The first method is much more reliable, since the application technology requires special equipment and strict adherence to technology. As a result, such a picket fence withstands increased mechanical stress. Even if there is a scratch in the coating (although you have to try), the metal does not rust, as there are still protective coatings that prevent rust.

Polymer coating is the best choice today

Powder coating, in theory, is no worse. But only if it was made according to the rules: a protective coating was applied to the primed metal, and on top of it - powder paint and baked it in special chambers. But the bottom line is that you can apply paint in the "garage", and somehow you can burn it there. The result will just be completely different. In addition, there are ready-made sheets of Chinese origin. In these, the paint is applied in the shop, but often directly onto an unprimed steel surface. Outwardly, it is impossible to determine all these nuances, and after the slightest scratch, rust appears. So the polymer coating is more "safe".

What can be a metal picket fence

You may like metal fences or not, because there is no dispute about tastes. But in terms of practicality, they certainly outperform. Once installed, you do not remember the fence for years. It does not need to be painted to make it look decent, as good quality paint lasts for years without visible change. And this is one of the important factors that make you think about installing such a fence.

On a strip foundation

With foundation and pillars made of clinker bricks

Mounting methods

There is a single-row and double-row (double-sided, checkerboard) method of mounting the metal picket fence strips. With a two-row, the slats are placed on both sides of the bowstring, and so that they overlap each other by at least a centimeter. Therefore, the distance between the planks should be slightly less than the width of the fence. With this installation, slats per linear meter of the fence will require 55-60% more. But the fence turns out to be practically invisible - only at a certain angle you can see a small part of the area. And this despite the fact that the fence will not be solid and all the "charms" of a solid fence will not touch you.

Most often, the strips are mounted vertically, but there is also a horizontal mounting method - it can also be single-row or double-row. looks horizontal fence more exotic. With a two-row (two-sided) installation of the strips, it turns out to be generally opaque.

The disadvantage of this mounting method is that special poles and intermediate poles are needed to provide the required structural rigidity. Another caveat: planks are usually produced up to 180 cm long, longer ones will have to be ordered, and this costs extra money. So either you have to put up poles more often, or overpay for a non-standard size.

Dimensions and distances

When mounted in one row, the gaps between the strips may be different. The exact distance is chosen arbitrarily, depending on how "transparent" you want to make the fence. Most often, the distance between the pickets is 35-50% of the width of the plank. But this is not a rule, there are both smaller and larger gaps.

When mounting in a checkerboard pattern, if you do not want your yard to be visible at an angle, the planks should overlap 50% of the width of the picket fence or more. If "viewability" is not important, you can set them so that the edges overlap by only 1 cm.

The height of the fence is selected depending on the wishes of the owners. If you want the yard to be as closed from prying eyes as possible, the length of the bar should be from 180 cm. Given that they will be slightly raised above the ground, this is enough to prevent the vast majority of people from looking into your territory.

If you don't care if something will be visible through the fence or not, you can take both 1250 mm and 1500 mm. In the first case, the fence will end somewhere at the chest level of passers-by, in the second - at eye level or slightly lower (see the figure for an approximate layout), and this is without a foundation.

The width of the span of a vertical fence made of a metal picket fence is 200-250 cm. It is at this distance that the pillars are dug in, then two or three crossbars are fixed between them. These crossbars are called "lags" or "bowstrings". For a picket fence up to 150 cm high, two crossbars are enough, for higher ones, three are better.

Infill types

There are several more varieties of filling spans (distances between supporting pillars). The easiest way to install a direct way is when all the strips are the same length. On top of such a fence, you can put a U-shaped bar made of the same material (sold in the same place as the euro picket fence). In addition to the aesthetic load, it also covers the metal sections, which increases the service life of the fence.

All "waves" require trimming most of the planks to a certain distance. One "wave" per span is made in increments of 50 or 25 mm. With a step of 50 mm, the height difference between the shortest and longest planks is significant, but the fence looks more delicate. In the case of a "wave" with a pitch of 25 mm or with a "double wave", the difference is smaller. The upper bars are put here much less often, but they can also be installed. Only at the point of fracture of the “wave” will you have to cut the sidewalls and bend.

Features and installation rules

When installing a metal picket fence in middle lane Russia, it is recommended to install poles from a profiled pipe 60 * 60 mm (60 * 40 can be). For crossbars, it is more convenient to take the same profiled pipe, but with a section of 40 * 20 mm. In this case, the fence will definitely withstand wind and snow loads.

When installing, the installation step of the pillars is 2 meters. If there are two crossbars, then they are fixed so that there are 25-35 cm to the edge of the plank. With a fence height of 150 cm or more, the distance is 30-35 cm, with shorter ones - 25 cm. But, with a fence height above 1.5 m, it is better to do three lags, and not only in regions with strong winds. It's just that with two lags, the distance between the fasteners is too large, which makes it easy to move the slats apart.

There are two ways to fasten the slats: with screws and with rivets. Self-tapping screws and rivets are installed along both edges of the plank on each of the crossbars. That is, if there are two crossbars, 4 self-tapping screws / rivets are needed for each bar, if there are three, then 6 fasteners are needed per picket. You can, of course, fix it on one self-tapping screw or rivet on the crossbar, setting it in the middle. But in this case, pushing the pickets with your hands is as easy as shelling pears - and you don’t need to climb over the fence.

Mounting is faster this way, but this is a “purely decorative” fence

Which fastener type to choose? Self-tapping screws are easy to install - this is their plus. But they are also easy to unscrew, which, under certain circumstances, can be a minus. Rivets take longer to install, but are much more difficult to remove. What to choose? On the front of the fence, or if the fence is left unattended for a long time (summer cottages), it is definitely worth putting rivets. Of course, if the attackers set their sights on the goal, they will also cope with the rivets, but this will be more difficult to do. When installing a fence between neighbors in houses permanent residence, it is quite possible to mount a metal picket fence on self-tapping screws.

How to DIY

As you probably noticed, the metal fence is produced using almost the same technology as the profiled sheet, but the sheet costs less. Therefore, many people have the idea to make a picket fence by spreading the profiled sheet into strips. In principle, this can be done if you are able to cut strictly along the line without any noticeable deviations. But for cutting it is necessary to use scissors for metal - perforated or manual. In no case should a grinder be cut, as it burns out the protective cover. So the work is not easy and it will take a lot of time. If that doesn't scare you, you can try.

What is the disadvantage of a homemade picket fence from a profiled sheet? Everything is obvious: the edge is rarely even, since it is difficult to do it manually. In addition, the cut is unprotected and may begin to rust. You can, of course, smear the sections with a primer / paint, but in order for all layers to lay down normally, an absolutely clean surface is required. That is, the places of cuts must first be dedusted (not so difficult, but it takes time), then also degreased. Only in this case the protective coating will be of really high quality.

It is advisable to roll the edges - this will give the home-made picket fence greater rigidity, because additional reliefs are rarely formed on the profiled sheet. It "holds" its shape due to its size and the alternation of waves.

Metal picket fence (Euro picket fence)- one of the most popular types of fencing for a cottage, a private house or a summer residence. Outwardly, it is a symbiosis of the classic wooden fence and a modern eurofence made of metal. It has various options installation of shtaketin and coloring, which allows you to add individuality and beauty to your fence.

The price of a metal picket fence with installation

The company "ZABORIA" provides services for the installation of a turnkey metal picket fence. We offer a comprehensive approach from project development to finished fencing. High quality, huge selection beautiful options fences, a guarantee of up to 3 years and minimum prices from 1050r. p/m. All products and technologies of Zaboria are patented and comply with GOST state quality standards.
Below are some examples of finished fences.

We offer special minimum possible prices for metal picket fences with turnkey installation in Moscow and the Moscow region - Economy option. The price already includes: materials and installation. Delivery of materials to the object is calculated separately.

Installation of a metal picket fence with customer materials from 320r. p/m.

Complete set and installation

EQUIPMENT

pillars- profiled pipe (50x50 mm., 60x60 mm., 80x80 mm.), thickness 2 mm.
lags- profiled pipe (40x20 mm., 40x25 mm.), thickness 1.5-2 mm.
The available width of the eurostudent is from 70 mm. up to 118 mm. Maximum height 2.5 m. Possible coating: plain (galvanized), plain paint, polymer coating (powder).

INSTALLATION

• The pillars are driven in to a depth of 1.2 m. They are compacted with soil, bottled with crushed stone and sand or concreted at your choice. The distance between the posts is 2.5 m.
• The joists are welded to the poles. For fences up to 2m high. two horizontal logs are fastened per span, more than 2 meters 3 or more logs.
• The fence is attached to the joists with RAL screws of the same color. The distance between the plates at the choice of the customer.
• Plugs are installed on top of the pillars.

The installation time for a fence made of eurostudent is about 30 - 40 p / m, in one working day.
When ordering a fence in our company, delivery by our transport is required, the cost is from 25 rubles / km.
On an individual basis, we will develop a fence project specifically for your requirements.

Additional options

Name	price, rub.	Unit
Primer "GF-21", color: gray, red-brown	12	p/m
Painting (color RAL6005, 8017,9002,7000)	44	p/m
Painting (color silver)	57	p/m
Powder coated RAL - 8017, 6005, 7040	58	p/m
Powder coated RAL - non-standard	69	p/m
Screw pile galvanized 76x108x1500 mm.	2200	PC.
Monolithic strip foundation 250x400 mm.	2300	p/m
Brick pillars 2000x380x380 mm.	10 500	PC.
Brickwork 215x240 mm.	1 520	p/m
Gate (Pillars 80x80 mm., Frame 40x20 mm.)	from 2 756	PC.
Gates (Pillars 80x80 mm., Frame 40x20 mm.)	from 4 138	PC.

Choice of metal fence

To maintain the declared high quality of our products, for the construction of metal picket fences, we use plates only from reliable and leading Russian manufacturers. Picket fence from China does not always contain required amount zinc in the alloy, which means that corrosion resistance may be minimal.

We offer the following options for metal plates with a number of advantages, including: elevated level stiffness, favorable price, high zinc content.

GRAND LINE

• M- and P-profile
• Width: 100 mm.
• Profile height: 16 mm.
• Stiffeners: 10 pcs.

CROWN

• M-profile
• Width: 116 mm.
• Profile height: 18 mm.
• Stiffeners: 12 pcs.

ECONOVA

• P-profile
• Width: 100 mm.
• Profile height: 19 mm.
• Stiffeners: 12 pcs.

NOVA

• P-profile
• Width: 118 mm.
• Profile height: 19 mm.
• Stiffeners: 14 pcs.

Fence Configurations

The ZABORIA company offers a huge number of decoration options and a creative approach to the construction of metal picket fences. You can order the unit with any shape and arrangement of plates, choose an individual color or surface texture. We will help to make the design of the fence as suitable as possible for the style of your house, cottage or cottage.

Picket fence location
Option A. The picket fence is attached to the outside of the fence. At a distance from each other. The greater the distance, the greater the clearance of the fence.
Option B. The fence is fastened on both sides of the fence in a checkerboard pattern, forming an almost blank fence. Clearance only at a certain angle.

Figure 1. The location of the fence on the logs.

Figured execution of the upper part
Very often, our customers order a fence with a figured execution of the upper part of the fence. There are a lot of options, but the most popular ones are shown in Figure 2.

Figure 2. Variants of the figures of the top of the euro picket fence.

Sections of the top
We suggest choosing cuts of the upper part of the metal plates for the fence. The cost of such a service is not high, but it will give even more individuality to your fence.

Figure 3. Sections of the upper edges of the plates.

Color solutions
The most common colors of euro picket fences are shown in Figure 4. But you can also choose any of the possible 213 color solutions according to the RAL system. If monotonous colors do not suit you, we offer picket fence with textures, such as antique or golden oak.

Figure 4. Color options.

Samples of our work

Advantages of a fence from an eurostudent fence

• Adjustable clearance level
  One of the main properties of a fence made of eurostudent is the adjustment of the clearance level. Fences, as a rule, are located at a distance of 1 to 10 cm from each other. Thus, the fence can be made almost deaf. If this is not enough, then metal pickets can be placed on both sides of the log, which will make it not visible at a right angle, and all this without harming the blowing of the territory.
• Reliability
  A metal picket fence is not only beautiful and practical, but also has a high degree of vandal resistance. As an additional option, we can install anti-vandal fasteners to reduce the risk of dismantling the fence. If you wish, the upper edges of the picket fence can be given a pointed shape and it will be quite problematic to climb over such a fence.
• Individuality
  Unlike any other types of fence, such a fence has many decorating options and can be adjusted to any style and format of the territory.
• Ease of maintenance
  Fences made of eurostudent made by our company do not require almost any maintenance. A eurostudent with a polymer coating, serve for more than 20 years. In addition, in case of mechanical damage, the fence can be easily replaced with a new one.

• Blowing the area near the fence is an important factor for summer residents. The fact is that normal and natural growth of plants and flowers is impossible near blind fences.

How to buy a metal picket fence profitably?

We carefully analyze our industry and the construction market as a whole. We look at what our competitors offer and what customers want, conduct surveys and read reviews. We have long concluded that fences made of cheap materials, even at a low price, do not meet the expectations of customers. For this reason, we have abandoned the use of cheap picket fences, and we produce components: logs, profiled pipes, poles and others on our own equipment. This approach made it possible to increase the quality of materials and reduce the cost of finished fences made of euro picket fences to the lowest possible in the region. "ZABORIA" offers:

• A fence made of a metal picket fence, the price with the installation of which is the lowest possible in Moscow and the Moscow region;
• Warranty up to 3 years, high service level;
• A huge variety of installation options, configurations, coatings;
• Opportunity to save significantly by taking advantage of temporary special offers;
• High-quality installation, honesty and a reliable partner working in the construction of fences for over 20 years.

Euro picket fence - relatively the new kind fencing of houses and suburban areas, which is galvanized metal strips from profiled sheets, coated with a colored polymer for protection and beauty. Such a fence is inexpensive, mounted quickly, and has been serving for more than 30 years. The demand for the eurostudent is explained by its main qualities: aesthetic appeal, durability, affordable price.

How much does a fence made of euro picket fence cost: materials plus work

On average, a linear meter will cost from one thousand rubles, along with installation work. If you mount a picket fence with your own hands, then its installation will be cheaper. The price of a fence depends on several factors:

• type of eurostudent - affects the manufacturer's brand, workmanship, coating thickness;
• plank height - from 1.5 to 2 m;
• the width of the shtaketin and the distance between them, which affects the number of slats per 1 lin. m fencing.

We calculate the amount of material for the fence

It is not difficult to make a fence from a euro picket fence on your own. Before purchasing components, you will need to calculate their quantity. You will need:

• eurostudent;
• bearing support pillars, usually for these purposes a professional pipe with a section of 60 * 60 mm is used;
• frame transverse logs - professional pipe 40 * 20 mm;
• fasteners - self-tapping screws 4 pcs. on one bar (two on the upper log and 2 on the lower).

To determine the specific number of slats, you need to know a few rules for installing a picket fence.

The total length of the fence is measured along the perimeter of the area to be fenced.

From the general indicators, it is necessary to subtract the length of the gates and gates (their total length is summed up).

The number of support pillars is calculated taking into account that the distance between them is 2.5 m, according to the following formula:

Number of posts = (the length of the perimeter fence - the length of the gates and gates) / the distance between the posts (2.5 m).

To this indicator is added the required number of pillars for installing gates (gates).

The calculation of the number of slats is made according to the formula:

Number of eurostaketins = length of the fence / (width of the plank + width of the gap between the planks).

If planned double sided installation fence, then this number is multiplied by 2.

Columns from a profile pipe for a fence

If it is decided to use professional pipe, and not to make brick pillars, then it can be of any kind - with a round or square section, 60*60 or 80*80 mm, with a wall thickness of 2 or 4 mm.

Eurostudent, unlike solid corrugated board, does not create sail from the wind, power and wind loads are less, so the requirements for support pillars are not so strict. Their concreting into the ground in most cases is not required.

Installing support poles

Installing a picket fence with your own hands begins with the installation of poles. The step-by-step instruction of the process is as follows.

Drilling(digging) wells with a depth of 1.1-1.5 m.

Pole installation. It is better to strengthen the bottom of the hole by placing hard stones. Fill the well with gravel, compact with earth.

Do-it-yourself metal picket fence. Photo step by step

concreting required only if the soil is loose sandy (or at the request of the owner to increase strength).

Install rain protection on top of the supports - plastic plugs.

Installation of transverse logs, fastening of the euro picket fence

If the pillars were concreted, then the procedure for fixing the transverse frame logs is started only on the next day. The transverse lower and upper lags are a frame for installing a euro picket fence. Their installation is possible in any order: first the upper ones, and then the lower ones, or vice versa. The crossbars are welded or fastened with self-tapping screws. You will need the following set of tools: level, tape measure, marking pencil, screwdriver. Step-by-step instructions for work are as follows.

Installation upper transverse lag at a distance of 50 cm from the top edge of the support column. The horizontality of the cross member is controlled by a level.

How to make a fence from a metal picket fence with your own hands. Photo step by step

Installation lower crossbars level at a distance of 30 cm from the ground.

After frame mounted, proceed to fixing the picket fence strips on it. Each plank is attached to the log with 4 self-tapping screws: 2 in the upper and 2 in the lower transverse log.

European picket fence. How to do

Euro picket fence. Photo

The distance between the fence. Picket types

The distance between the slats eurostudent determines the degree of openness of the fence. It can be from 2 to 10 cm. The average figure is 5 cm. With a two-sided arrangement of the euro picket fence, an 8 cm step is made on each side - in this case, with a lath width of 11.8 mm, an almost blind fence is obtained.

Advice. On garden plot or more light is required between gardens, so the gap between the euro picket fence is made large.

Do-it-yourself metal picket fence. Photo

According to the type of top coating, the eurostudent is produced with a polymer layer or powder coating (this is a more durable option, it is not prone to scratches). Coloring is one- or two-sided. According to the method of processing the edges, strips with curved edges (rolled) and non-rolled are distinguished. The shape of the relief and the top edge can also vary. All differences and decorative "excesses" affect the price of the material.

The height of the fence from eurostudent

The standard length of the planks of the euro fence is 1.5, 1.8 and 2 m. The height of the fence is determined by the owner of the site, depending on his needs - if the task is to hide the territory from prying eyes, then it is advisable to choose planks 2 m long and make a double-sided blind fence. For open garden plots, the height of the fence is 1.5 and 1.8 m with a large gap between the individual slats.

Advantages of a fence made of euro picket fence

Eurostudent is a promising material with many advantages:

• wear resistance- the protection will serve from 30 years and above without change of appearance;
• unpretentiousness in care - the fence does not require painting, does not rot, therefore, no repair or replacement of elements is needed;
• ease of installation- the fence can be installed independently in 1-2 days;
• neat appearance;
• low cost- This is one of the most inexpensive and durable materials.