Choosing a double bed. How to choose a bed for bedrooms: Design features and rules for location in space The best bed for sleep

Currently, almost everyone has the opportunity to choose and buy such a double bed that will best fit into the existing interior, it will be quite spacious and as comfortable as possible.
Double bed S. lifting mechanism And the box for bed, allows you to abandon furniture for storing bed linen.

If you are also going to buy new furniture, you need, first of all, understand not to spend in vain money.

Scheme overall dimensions Bases of a double bed.

Disassembling in how to choose a bed, you need to pay special attention to the frame.
This is the basis of a product that is usually hidden from putting viewsBut it is from it that depends on the reliability and durability of the bed.

Choosing a bed in the bedroom, you need to pay attention to the following frame characteristics:
compliance with mattress dimensions;

manufacturing material;

external data.

The sizes of the mattress and bed must accurately match each other.

Choosing a double bed, pay attention to how many lattices and jumpers has its framework. The more his dimensions, the more they should be.

No need to save too much. It is better to buy a high-quality and expensive double bed, the cheaper, which fails after 1-2 years.
Longitudinal block diagram.

The best quality features frames that are made of beech, ash and oak.

If you want to choose a bed with a frame made of natural wood, be careful. Some dubious manufacturers are issued for a natural product. various materials "under the tree".

This can be determined by the following factors:

If the bed in the bedroom is painted, then the frame can be made not from natural wood. The color of the natural material is almost identical to the color of human skin.

Spend on the frame of a nail with a light pressure. If a small scratch or even a deepening remains on the surface, then it is natural wood. However, this statement is valid only for soft rocks.

Back to the category

Selection of material

Scheme and instructions for assembling a double bed.

It is very important that the bed double bed is made of safe and qualitative material. Some companies are used in the production of beds not only the materials of improper quality, but also treated them with impregnations that are able to seriously harm health.

Frames are made of the following materials:

natural wood;

natural wood veneer;

wood array;

different materials "under the tree".

It is best to buy a double bed, the frame of which is made of natural wood. This material will not poison you with harmful discharge. Even on the contrary, natural materials are additionally cleaned air.

If you are limited in the budget, pay attention to the furniture with the "under the tree" frame. In most cases, this is a laminated chipboard (LDSP). This material is very simple in manufacturing and is much cheaper than natural wood.

Metal can be attributed to the number of environmentally friendly materials. For the manufacture of carcasses of double beds, aluminum and titanium are used. Metal frames for beds are inexpensive, it looks beautiful and sufficiently serve. Nonsense, but, along with this, an attractive appearance Allows you to enter such a bed in any interior.

Back to the category

Reliability of construction and ease of operation

Example 1: Double bed design scheme.

Beech, various conifers, birch, oak are considered the most reliable and durable materials.

However, you need to remember that the beds from these materials are quite expensive. On the modern market Presented reliable, safe and less expensive alternatives.

You can give a choice in favor of a frame of plywood or chipboard. However, in this case, you need to be very attentive, because Great Probability Buy a product of improper quality.

To warn itself from different surprises, carefully examine the framework of the frame.

Look, whether the veneer does not appear, how tightly the fasteners are sitting, etc.

It is extremely desirable that the material is impregnated with special antifungal agents.

Metal structures in their characteristics are superior to Phaneur, materials "under the tree", and sometimes even natural wood.

Such frames will serve 20 years and more. The only disadvantage of this material is that it does not tolerate moisture effect. However, today manufacturers use special paints and varnishesproviding reliable protection from corrosion.

Example 2: Design diagram and individual knots of a double bed.

It is important that the bed in the bedroom was not only reliable, but also convenient to operate. There is one important characteristic to which many buyers do not even pay their attention.

It is very important that the height of the skeleton of the bed was comfortable for the one who will sleep on it. So, for example, the standard framework of a European-type bed has a height of about 50 cm, while the elemental sample box will be located almost at the floor level.

You need to remember: the older the user beds, the more difficult it will get up from a low bedroom.

However, it is not necessary to fall in extremes either, as some people buying beds with a frame of about 1 m. This bed only looks beautiful, but to sleep on it in most cases is quite uncomfortable.

Back to the category

Choosing a mattress for a double bed, first of all, find the right base. It performs the functions of the mattress support and is attached to the frame of the bed. Sometimes it is called a frame or grille. There are foundations different types. One of the most common options is a wooden base, also known as a robust.

Roller fastening diagram to base base.

Rush frame is the base collected from wood or metal. To it, with a certain step, the straight or cnut-glued rails are attached. In most cases, such bases are made of birch and beech. The first option is more fiscal.

Among the main advantages wooden base You can select the following:

relatively low cost;

good ventilation properties.

The main disadvantages of racks:

due to the fact that there is no support between the rails, after some time the mattress becomes wavy;

a relatively low service life - the mattress quickly loses its initial elasticity and form.

No less popular material used for making mattress bases is plastic. Such frames are manufactured using plastic spring elements.

Among their positive characteristics can be allocated:

service life of more than 15 years;

good orthopedic properties;

convenience in operation;

high strength.

The main disadvantages of plastic bases:

the lower part of the mattress is not well ventilated;

relatively high price.

One of the oldest and most famous for almost every person of the base options is metal grid. Such a base has a number of advantages, namely:

service life - over 25 years;

excellent orthopedic indicators;

more affordable price Compared with previously discussed options.

But there is a grid and its shortcomings. The main one is that sometimes it is extremely difficult to choose good bed on a metal basis, because For its assembly, we need certain skills and knowledge that very little specialists currently own.

Many people believe that the mattress should be very tough. In fact, they are mistaken. Too hard mattress will not "adapt" under the user's body. However, and from too soft mattress is also better to refuse, because It can provoke the curvature of the spine. The best option is an orthopedic mattress of medium hardness.

The stiffness of the mattress determines its base. The mattress can be spring and flawed. In most cases, orthopedic properties depend on how many springs are installed - than them more, the higher the effect. However, it is important that the fastening of the springs is not too tough. It is not only uncomfortable, but also harmful.

The basis of flawed mattresses is latex foam. This material does not cause allergies, is characterized by a long service life, good ventilability and environmental friendliness.

Thus, choosing a bed into the bedroom, you need to take into account many important points. However, you can be sure that in this case you will definitely be satisfied with the purchase!

In bed, a person conducts a considerable part of his life. On what it will be, the health and the convenience of those who will sleep on it, and general form Bedrooms.

It is impossible to solve an ambulance hand, how to choose a bed, and a mattress. It is necessary to take into account the style of execution of the bed, shape, size, materials from which it is made, which mattress will provide a healthy sleep, and many other important trifles.

Style

Deciding on what bed to choose for a bedroom, first of all you need to decide on the interior design style. Several popular directions:

Classic bed solid. It is a durable, proper geometric shape, from natural tree or upholstered skin, natural or pastel tones. Perhaps with gilding or silver finish, with signs of noble aging.
Model B. scandinavian style Made of wood or metal, with drawers and simple bedside sumps, light or natural.
High-tech bed has a high-tech and multifunctional design, proper geometric shapes. Metallic, black and white gamma is welcome.
Model in the style of minimalism - concise, black, white or gray With minimal decor.
The main features of Modern style are interesting forms and lack of sharp corners.
For country and Mediterranean style, the product is selected from natural wood of light tones or metal with a patina.

The color of the furniture is determined depending on the design of the walls. It can be contrasting. The best choice in this case is a combination of various bright and dark neutral shades, such as beige and dark brown.

A bright bed will look at a bright background. On the neutral wall background - bright. You can combine bright, pastel shades. You can purchase a model that coincides with the tone of the walls, good example - Fashionable white bedrooms.

Design carcass

Solving which bed it is better to choose, it is important to decide on the frame. It consists of a headboard, supports and kings and can be made of chipboard, MDF, natural wood or metal.

The design of the design can serve as legs, stationary or adjustable, wood or metal. Their quantity depends on the size of the bed. The role of the support can take on the base of the backs, or the kard.

Tsarga - side panelsbonded between themselves, contributing to the strengthening of the carcass strength. It can be deep, to the floor, or narrow, on the thickness of the mattress.

The design of the bed can be rigid or soft. Hard models have wooden or metal frames.

Frame frame can be made of wood or metal. Metal frame consists of cooked profile pipesto which they are attached different ways Wooden lamellas. The wall thickness of such a tube must be at least 1.5 mm.

The overall furniture is made with a folding frame of wood, metal or chipboard to facilitate transportation.

When choosing a bed, it is important to draw attention to which weight is designed for the frame, evaluate the quality of the assembly, the reliability of the welds, the absence of the backlash, the quality of fittings and fasteners, the accuracy of the gluing parts.

Bed back

The choice of bed is not necessary without the selection of the back. If you plan not only to sleep on the bed, but also to read or watch TV, it is best to give preference to models with a soft upholstery of the head of the head. Its height in this case should correspond to human growth. If the role of the back is only decorative, they can be made of wood or metal without upholstery.

The headboard can be stationary and be part of the bed or separately, attached to the wall. It can be purchased separately. In size, it may coincide with the width of the bed or much to exceed it.

You can choose a bed in a bedroom with a popping and side back. Children's models can be fenced throughout the perimeter with removable sidewalls.

Size and form

How to choose the size of the bed depends on how many people will sleep on it, their set and age.

For children, single-layer models choose, for adolescents and adults sleeping alone, - half, for couples - double. Standard single beds have a width of 70, 80 or 90 cm, one-time - from 1 to 1.4 m, double - from 1.4 to 1.9 m. Individually, you can order a bed width 2 m or more.

It is necessary to choose in terms of growth plus 20 cm. The standard length of adult models is 190-200 cm. You can order a product of a long 210 cm or more. Pick up the dimensions of a double bed, focusing on the growth and a set of the largest family member.

The height of the bed can be different. The lowest models are height from 20 to 40 cm, medium - from 40 to 60 cm, high - from 60 cm and more. The average models have at the base of the Tumba or storage boxes, and high - 2 and more than a number of boxes.

The most comfortable is the rectangular shape of the bed. Double models can be square, round, oval, semi-circular, to have a heart shape.

Bed performance material

Manufacturers offer breeds from natural wood, simple or laminated chipboard, MDF, Metal. Wooden models can be made of oak, birch, ash, pine and other wood breeds.

The most environmentally friendly, practical, easy to maintain and durable wooden and wrought models. They are the most expensive. Forged Products Mandatory cover with anti-corrosion compositions.

Much cheaper models from chipboard and MDF. Products from these materials are often inhabited by matter or leather. It uses natural or ekocober, jacquard, velor, tapestry, flock, shanyl, cargo, suede or microfiber. To improve wear resistance, the bed fabric is treated with teflon or scotchgard.

Bed with lifting mechanism

How to choose a bed with a lifting mechanism depends on its type:

It is possible to rise and change the angle of inclination of the bed. Such models have a lever or an automated lifting mechanism.
Sleeping rises in full, opening access to the storage of sleeping facilities.

Lifting mechanisms are the following varieties:

Folded bed, or transformer

Allow the living room as a bedroom. They are horizontal and vertical:

Horizontal - one - or semi-silent structures that are attached to the base side. Such models are cleaned into the closet or transform into desk Or the end, the top of which plays the role of the shelf or an additional bed.
Vertical models can be any width. They are mounted in a closet or niche in the wall. They are additionally completed with a sofa, shelf, which plays the role of support for bedroom, side cabinets, internal shelves.

Several tips how to choose a good bed with a folding mechanism:

When choosing a vertical model, you need to take into account the height of the ceilings.
The best choice for folding design - gas shock absorbers or automatic lifts. The choice of power shock absorbers depends on the weight of the bed.
Vertical models embedded in the closet are masked by swing doors or coupe. Swing doors overlap part of the head of the head and the coupe block off the branches with things when the bed is lowered. The best choice is 3 panels moving on the rails, but they are equipped with wide wardrobes.
The wall to which the design is attached, should be reliable. Plasterboard and other temporary partitions are not suitable for this.
High-quality and safe folding models and transformer beds cannot cost cheap.

Choose the base of the mattress

As a base for the mattress, orthopedic lamellas or solid sheets of plywood or chipboard are installed. A solid base provides the best preservation of the mattress, prevents its deformation. If you need an orthopedic bed, preference is better to send lamellas. In this case, the model must be selected so as not to creak, it served quite a long time and performed orthopedic functions.

To answer the question of how to choose a bed for a bedroom with an orthopedic base, you should figure out what lamellas and what they happen. Lamella is a lattice of planks that are damasters for the body during sleep. When choosing in this case, such important characteristics are taken into account as the material, the distance between the planks, their number and width.

Wooden wooden

In order for the base of the bed for a long time, it is important to correctly choose the material from which the lamellas will be made. There will last longer a plank, capable of withstanding a large load and enough elastic.

It is best to choose lamellas from beech, birch and grab. For a mattress with a block of dependent springs, the plank must be at a distance of 6-7 cm from each other, for a mattress with independent springs - up to 5 cm, for flawed mattresses - 2.5-3.5 cm. At the base of the single bed there should be no Less than 14, double - not less than 20. Width 1 sheet - 5.3 or 6.8 cm.

Metal

You can choose a bed with metal slats. They do not change their hardness over the period of operation, do not creak, but practically do not bend under the weight of the body, which reduces orthopedic properties.

Metal should be covered with anti-corrosion varnish or paint. Such slats for a single bed is needed 10, and for double -15 pieces. Metal base is not installed on folding and lifting structures due to high weight.

Plastics

Plastic base for the bed consists of plastic spring elements, representing a lattice of transverse plastic crossbar.

Such a base for the mattress is quite strong, durable and functional. Its main drawbacks is a high price and poor air circulation under the mattress.

Bed and mattresses are equally important in ensuring comfortable sleep and spinal health. Mattresses are spring and non-spring, have a different degree of elasticity and rigidity.

It is necessary to solve the question of how to choose an orthopedic bed, only after the selection of the mattress type. The case can be sewn from natural fabric (cotton, wool) or from synthetic material (microfibra).

Spring

The best mattresses are spring, the more springs, the higher their elasticity. There are mattresses with dependent and independent springs.

Sound springs are interconnected, therefore, when they are compressed simultaneously, several pieces are compressed in varying degrees. Such mattresses serve no more than 10 years. Over time, the springs break and break through the case. The smaller the diameter of the springs, the more rigid will be the surface.

A block with independent elements is a set of separate springs, each of which is in a textile case. They can shrink and straighten independently of each other, which provides support for all spine sections during sleep. Numerous reviews indicate that mattresses with independent springs are the most comfortable and durable.

Extra layers are important, which most often uses foam rubber, latex and coconut boron.

What do you do with old furniture?

Hard or soft? Spring, latex or polyurethane? The selection of mattresses is huge. The main thing is to decide on the budget and basic requirements. Soft mattress is not the best choice For your back. If only this option is not due to medical testimony or your personal acute necessity. It is best to choose a medium-rigid or hard mattress. Polyurethane and latex - synthetic fibers that are great for filling the mattress. At the same time, they provide good support and comfort during sleep. High-quality polyurethane mattresses possess the effect of memory, that is, "remember" the bends of your body "remember" and provide maximum support during sleep.

Spring mattresses are also with a filler of synthetic materials, as well as with a layer of fiber coconut Palmawhich provides the best air circulation. Springs are better to choose a pocket type. In this case, even if your neighbor in bed likes to swear in a dream, it does not disturb you at all. And of course, do not forget about buying a mattress shop - it is hygienic and convenient: it is much easier to wash the mattress, than to give a mattress into dry cleaning.

The bed is for us as the usual piece of furniture that without it it is impossible to present its usual household environment. On it you start and finish your day. How to choose a bed? Let's figure it out.

The bed is for us as the usual piece of furniture that without it it is impossible to present its usual household environment.

Which bed is better suitable for family comfort and create the necessary conditions For full sleep? There are five factors determining the level of comfort:

form - appearance and functionality;
dimensions - length, width and height;
design - frame and materials;
base for bed - determines its safety;
mattress - protects your health.

Which bed is better suitable for family comfort and create the necessary conditions for full sleep?

Consider more each of them.

A classic rectangular shape is the base of sleeping furniture.

1. Form - Beauty or practicality?

A classic rectangular shape is the base of sleeping furniture. Beds in the form of a heart or a circle look impurious, but uncomfortable in everyday family life. Sleep together on such exclusive beds, you can only hugging tightly in order not to fall in a dream on the floor. You can curl up, but if you have a sick back, there will be no peaceful sleep. For the bed of a non-standard form you need to sew sheets and capes to order. It requires more empty space that will be used irrational.

You can curl up, but if you have a sick back, there will be no peaceful sleep.

ON A NOTE!

Transformer beds will help you solve the problem of lack of space in an apartment with a small square. In the afternoon they can turn into a wardrobe or convenient desk table bedside table. Also pay attention to the bunk folding beds that are masking under the sofa.

For the bed of a non-standard form you need to sew sheets and capes to order.

Wrouders of a spacious apartment for the soul will have a bed on the podium. The idea to lift the cozy nest over a worldly bustle will undoubtedly withdraw your relationship to a higher level, but in front of it, think about the feasibility of this step.

The choice of a frame of bed depends on the number of people who will sleep on it.

A more practical solution will be the equipment of the podium drawers. In fact, you will get a full cabinet pretending to the bed.

2. Dimensions - it all depends on latitude, length and height

In Russia and Europe, the separation of beds into three categories is widely used - one-, one and a half and double. But each person has individual growth values \u200b\u200band shoulders widths that do not always fit into the proludent bed of such a classification.

With good quality assembly, such a bed will last long.

The most important thing is the size of the bedroom. The length should be at least your growth, which can be safe to add 20 cm. Select the bed of the required width will help the next simple way: Lie on it strictly in the middle, spread your hands to the sides and bend them in the elbows. If they stayed within the bedroom zone - you are not mistaken in the choice.

On a low bed easier to hire a draft.

In furniture stores you can choose beds made by European and American standards. In order to buy comfortable furniture, use our comparative table:

The height of the foundation also affects the comfort.

The height of the foundation also affects the comfort. It depends on climate and local cultural traditions. On a low bed easier to hire a draft. For Europe with a cooler climate optimal, the value within 0.5-0.6 m is considered, and in Asia does not exceed 0.4 m. Later is to fall in America's residents - the minimum bed height begins from 0.8 m.

The material and frame of the semi-gun bed may be the same.

ON A NOTE!

Each person has individual growth and widths and widths that do not always fit into the proludent bed of such a classification.

3. Frame and material - the more seriously the relationship, the stronger

The choice of a frame of bed depends on the number of people who will sleep on it. Single bed can be made from chipboard and consist of two bearing backs (headboard and popping) and two longitudinal side walls - CARG. With good quality assembly, such a bed will last long.

The material and frame of the semi-gun bed may be the same. But more often the variant of four CARGs, four legs and one mounted headboard.

But more often the variant of four CARGs, four legs and one mounted headboard.

Double and family beds are experiencing increased load. Therefore, do not buy economy options. The best solution will be metal carcass Or a box of wood massif.

Bed backrests (headboard and popping) - important framework elements performing several tasks:

in the same and half-gun versions, they are the carrier element of the frame;
prevent pillow drop and slipping blankets on the floor;
protect from the contact of the parts of the body with a wall - the wallpaper does not deteriorate and the risk of colds is reduced - remember how we like to watch TV before bed, leaning back to the head of the head;
in some models, the population is made in the form of a narrow and high drawer with a folding riding, which is convenient for storing soft things;
on the back-headboard you can install nightlines for convenient reading.

Double and family beds are experiencing increased load.

4. Base for bed - you can only rely on what resistance has

The main rule - the bottom of the bed should not be fed under the weight of the mattress and sleeping people. Therefore, clamshells with the base of tensioned dense tissue and design with metal grids can be useful only as a temporary bed.

The basis of the popular now bent lamellae, glued from wood veneer, facilitates the design and calmly solve heavy loads. But it can easily break if your children decide to use a bed as a trampoline.

The best solution will be a metal frame or a box of woody array.

Bed base should be a solid piece of thick plywood or chipboard. A grill is allowed from thick boards with a small gap between them.

IMPORTANT! When buying a bed made of wood, make sure that there is a longitudinal jumper inside the box that performs the function of the additional support. It evenly distributes the load generated by sleeping, and prevents the base of the bed base.

On the back-headboard you can install nightlines for convenient reading.

5. Mattress - Balance Yin and Yan consists in mutual agreement

Take care carefully to his choice. Products coming with a bed do not take into account the individual characteristics of your figure. And when the bed is double, then there will be a natural conflict of interests between the spouses, which must be resolved as quickly as possible.

Cheap foam foam products are quickly pushed and lose its original form - they do not withstand long-term use. Discard such a mattress or hide into a chungy and use for guests.

The main rule - the bottom of the bed should not be fed under the weight of the mattress and sleeping people.

If your weight categories are the same, then the mattress for the bed is suitable with the basis consisting of the blocks of the dependent springs about 100 pieces per 1 kV. meter. The upper part of each spring is connected from the neighboring. This method provides the necessary orthopedic rigidity, but has a flaw. With a big difference in weight, the outer surface forms a slope towards a heavier spouse. And this is fraught with an inevitable slipping from the bed to the floor during sleep.

It requires more empty space that will be used irrational.

The second consequence of this method of binding springs is an unpleasant loud creaking. You can make good sound insulation in the apartment, but it will be cheaper to buy a mattress for a bed made using independent springs technology (EVS) - 200 or more pieces per square meter. meter. Each of them carries its part of the load without transmitting it to the next element, and enclosed into the shell, which eliminates friction and extinguishes the clicks published in a sharp compression. The surface is finely adjustable under the shape of your body, excluding the skew.

The basis of the popular now bent lamellae, glued from wood veneer, facilitates the design and calmly solve heavy loads.

But on this disagreement in beds may not end - your spouse loves to sleep on a hard surface, and you are accustomed to the fluff perin. In a modern mattress, the softness is corresponding to a layer of batting or latex, and the rigidity is as follows with felt or coconut fiber (coir). The ratio of the thickness of these components gives the surface the necessary properties.

If your tastes are drastically different, buy two single mattresses for the bed, characterized by surface rigidity. You can also purchase a product in which one half is intentionally made softer. A similar effect can be achieved through the use of less tight springs.

For the elderly, preferably the high location of the base of the bed - so they spend less effort when rising in the morning.

With the difference in weight over 50 kg, family idyll will save the product manufactured using DS technology. Between the usual units of independent springs, the elements made according to the "two in one" principle are evenly distributed - in a high spring with a large diameter inserted a narrower smaller length. The ratio of conventional and reinforced elements is approximately 260 to 130 per 1 kV. meter. When the external does not cope with the load, the inner spring comes to the rescue. This design significantly extends their life.

The protective cover should not accumulate dust and moisture and climb to holes. Best Material It is Jacquard - its composition includes cotton and synthetic materials.

The length should be no less than your growth, which can be safe to add 20 cm.

FOR YOUR INFORMATION! The greater the cotton content in jacquard, the higher its strength.

A good and cheaper solution will be a knitwear case. Polyester products are durable and do not let moisture, but poorly ventilated and create a weak friction coefficient - the sheets are easily cleaved. Boshi covers "breathe", but quickly rubbing.

The most important thing is the size of the bedroom.

Each bed should know his place!

Ergonomics have long produced simple and mandatory rules, helping to conveniently arrange it in the room:

the double bed is better to put the headboard to the wall;
between the surrounding objects and side walls of the bed must be free space at least 70 cm;
do not put the bed in front of the window - to wake up from bright sunlight. Little anyone likes, and the risk of earning a chronic cold from constant drafts will noticeably increase;
do not place the bed in the center of the room - the best option There will be a niche or space in the furniture wall.

In furniture stores you can choose beds made by European and American standards.

Listen carefully to the advice of interior designers. The bed must match the selected style.

Wicker design with a frame of bamboo perfectly fit into ecological styleBut it will be bad to combine with a minimalist design.
The high podium or platform fit well into high-tech, but will look no matter in the livestock interior or provence, as well as in low ceilings rooms.

There are five factors that determine the level of comfort.

IMPORTANT! Beds of such a form will organically look in a separate bedroom, but the height of the podium should not exceed 0.2 m.

On it you start and finish your day.

Because you rested at night, the productivity of your day depends. Therefore, come carefully to choosing a bed - she plays in this an important role. So that the family life nest is truly cozy, take care that the return home is desired for your loved ones.

If there is not enough space for wardrobes, for storing clothes and other necessary things, use beds with built-in retractable boxes.

The seller is obliged to provide detailed information on the product: equipment, dimensions and what size will be required mattress. Check that the price includes all the necessary items.

Comfortable size for two

The optimal width of the bedroom, when it is comfortable to both spouses - 160 cm, this is the standard. Each time is enough space, sit comfortably and do not interfere with another. Slender and young spouses can be limited to one-sighted (140 cm), and it is better to take the model to take a model (from 180 cm).

Reliability of the foundation

It depends on how long the bed will serve. Champion for strength and durability - orthopedic base. This is a metal frame with transverse rails, which are still called lats, lamellas or latofers. The risk of breakdowns of the frame itself is absent, and the slaughtered lamellas are easily changed. The design withstands large loads from 200 kg on sleeping place. An additional plus: the grid provides the necessary ventilation of the mattress and increases its service life.

Choosing a double bed. How to choose a bed for bedrooms: Design features and rules for location in space The best bed for sleep

Selection of material