Sawing and cutting of chipboard and chipboard. Sawing and cutting of chipboard Order laminated chipboard according to the customer's sizes

We carry out:

• Cutting chipboard
• Cut MDF
• Plywood cut
• Sawing of fiberboard panels
• Cut HDF
• Sawing panels finished with plastic
• Sawing veneer panels
• Sawing plastic
• Plexiglas cut
• Sawing of facade panels
• Saw tabletops
• Panel sawing postforming
• Manufacturing of multi-blade parts from chipboard and MDF.

  All of the above materials are guaranteed to be sawn without chips or breakdowns. When sawing, an automatic cutting center Holzma (Germany) and a panel-sawing machine Feeder Capa 450 (Austria) are used. When ordering, a cutting plan is drawn up for the best distribution of parts on the sheet, in order to obtain a minimum percentage of losses. To speed up the cutting process, there is the possibility of batch cutting. We cut parts both from our own material and from the material of the customer. Always in stock 12 colors of high quality laminated chipboard: White Vanilla Gray Metallic Black Wenge Walnut Eco Alder Plank Cherry Portofino Cherry Beech Oak Bleached Po individual orders we make multi-rip parts, panels with a groove.

  • The term of order production is 5-7 working days.
  • An urgent order is made in 3-4 working days.

  * We carry out free storage of the manufactured order for no more than 3 calendar days. In case of late export of the order, storage is paid separately at the rate of 1 pallet - 100 rubles per day.
  ** Finished orders are stored on a Euro pallet. When loading an order together with a Euro pallet, the customer gives the collateral value of the pallet at the rate of 250 rubles.
  *** Order packing is paid separately, according to the prices given in the table. The order is loaded into the body of the customer's car using a loader.

  
  Open chipboard in Moscow Is one of the main directions of our company. In addition, in the RASPILPODOLSK company you can order sawing of MDF, plywood, fiberboard, HDF, plastic, plexiglass, table tops, postforming panels.

  Advantages of ordering sawn chipboard in the company "RASPILPODOLSK"

  High-quality sawn chipboard... We use the German cutting center Holzma and the Austrian cutting machine Feeder Capa 450. The high-quality equipment, which has long proven itself on the market, allows us to guarantee that the cut will be carried out without chips or cracks, with the highest possible accuracy (0.3 mm). The panels are loaded automatically, which eliminates the human factor and, therefore, reduces the likelihood of rejects to zero;

  Sale of laminated chipboard with sawing in Moscow... We offer cutting of customer's materials and our own. We always have 12 colors of laminated chipboard from the SWISS KRONO company in stock. We work with this manufacturer, because we were convinced from experience what exactly he offers best material... For the manufacture of chipboard, he uses only the best raw materials, which are absolutely safe for humans. When cutting chipboard from "SWISS KRONO" there are no difficulties, the edges are smooth and neat;

  Cutting chipboard into complex shapes... The Feeder Capa 450 cutting machine makes it possible to cut not only standard square and rectangular shapes from chipboard, but also a triangle, hexagon, trapezoid, etc.;

  Urgent cutting of laminated chipboard... The machines allow for batch cutting, which significantly speeds up the work. If you need urgent cutting of laminated chipboard in Moscow, please contact us! The standard lead time is 5-7 working days, and urgent - 3-4 days;

  Rational consumption of material... Before cutting, a cutting map is drawn up, where the placement of parts on the sheet is optimized, thanks to which the amount of waste is reduced to a minimum, or there is no waste at all;

  Cutting chipboard at a low price, which allows you to reduce your costs for preparing material for further processing. Savings on this service allow furniture manufacturers to reduce their costs and increase profits.

  Cutting laminated chipboard according to the customer's size (Moscow and Moscow region)

  Cutting chipboard is an important stage in the production of furniture. This process cannot be called simple, high-quality equipment is required to use it, manual sawing will lead to cracks and chips.

  Are you looking for where to cut laminated chipboard to your own size? Please contact our company "RASPILPODOLSK".

  Also in our company you can buy laminated chipboard with a saw cut in Moscow. Ready-made high-quality elements are perfect for making furniture. With smooth parts without chips, furniture will be of higher quality and with high aesthetic properties.

  We have our own production and are engaged in wholesales, so our important advantage is the price. Cutting laminated chipboard is cheap, but at the same time of high quality - this is what we offer to our clients. If you are looking for a company that will cut laminated chipboard according to the customer's size (Moscow) or sell high-quality ready-made elements from laminated chipboard, then contact RASPILPODOLSK!

For many years we have been engaged in the production and manufacture of cabinet furniture, and over the years of cooperation with various clients we have gained excellent experience. Contacting us is a guarantee of quality work in the shortest possible time!

Chipboard edging

We carry out edging of parts made of chipboard and laminated chipboard both with a thin PVC edge - 0.4 mm, and with a PVC edge of 2 mm.

Edgebanding cost:

• PVC edging 0.4 mm thick - 40 rub / r.m
• PVC edges 2 mm thick - 80 rub / r.m

We carry out edging of radius and curved parts. Check with the company's managers about the availability and cost. You have the opportunity to send a request by mail on the website and our manager will contact you as soon as possible.

Edging is an important step in the furniture manufacturing process. It involves the application of furniture edges to the end face of chipboard / chipboard parts. It allows you to protect the part from various mechanical damage, increasing the life of the furniture. In addition, edged furniture looks neater and fits better with the interior. A well-glued edge also ensures the moisture resistance of the part, but this requires that it be applied by professionals on special equipment.

To get detailed advice on these and our other services, just call or write and consultants will answer any question

We cut laminated chipboard into parts according to the customer's size. There is a large selection of EGGER and Kronospan laminated chipboard decors.

Attention!
Egger has announced the release of most of the laminated chipboard decors in 2020! Order any decors now, don't delay for tomorrow!

Price of Egger chipboard part with cut to size

Price of a Kronospan chipboard part with a cut to size

Radius cut

Nesting is not only a radius cut of curved parts on milling machine with CNC, but also the manufacture of parts from chipboard and MDF with holes for assembly in one go, i.e. without moving from machine to machine.

The main advantages of manufacturing curved parts and parts with additives using NESTING technology:

1. Possibility of saving sheets of chipboard due to a denser arrangement of curved parts on a sheet of chipboard
2. High productivity - cutting speed up to 20 meters per minute.
3. A fundamentally higher manufacturing accuracy compared to traditional technologies.
4. The ability to manufacture high quality internal cutouts.
5. Finish cuts on both the front and back of the workpiece for improved edge quality.
6. Ability to work with vector files created in Basis Mebelshchik, Corel Draw and their analogues.

The above advantages allow you to save both on material and on the cost of work on curved sawing and additives, which is fully tangible on large orders.

The cost of cutting services on a CNC milling machine for laminated chipboard and MDF with a thickness of 8-19 mm is 30 rubles per 1 lm.

Radial cutting of a part from chipboard

Chipboard edge processing

Application of 0.45 mm PVC edges to laminated chipboard parts

Applying 2 mm PVC edges to laminated chipboard parts

Hardboard (fiberboard)

Sawing out hardboard and holes for fiberboard

MDF

Cutting MDF Kronostar by size

Furniture additive

Drilling holes in chipboard for fittings

Hole for furniture hinges, Ø35 mm	RUB 55 / PCS.
Hole for shelf holders, Ø5 mm	RUB 25 / PCS.
Through hole for confirmation, Ø8 mm	RUB 25 / PCS.
End hole for confirmation, Ø5 mm	RUB 25 / PCS.
You can get the parts faster by filling out and paying urgent cut. DSP Komplekt reserves the right to refuse to provide services without giving reasons. Payment for services You can pay for cutting services: in cash at the office or at the production site (see Contacts); by bank transfer on the basis of an account: via the Internet Bank or mobile application; at any branch of Sberbank of Russia or another bank; through the terminals of Credit Bank of Moscow.

An important procedure is sawing chipboard, during which work is carried out with two materials - chipboard and laminated coating. You should choose the tools that are suitable for them and will not leave any chips or cracks. The procedure is quite laborious, being much simpler with other materials - chipboard, MDF and others. That is why it is undesirable to perform it at home - unforeseen costs may follow for the purchase of new materials.

Prices for cutting laminated chipboard

Milling

RUB 150 / r.m.

Rounding of one corner up to 90 degrees. radius from 50 to 300mm (external)

150 rubles / piece

Rounding of one corner up to 90 degrees. radius from 300 to 600mm (external)

300 rubles / piece

Rounding of one corner up to 90 degrees. Radius 50 to 300 mm (Internal)

300 rubles / piece

Rounding of one corner up to 90 degrees. Radius from 300 to 600 mm (Internal)

400 rubles / piece

PVC 0.4 mm material thickness 16mm / 18mm / more than 18 mm per p / m

45/50 / 55r.

PVC 2 mm material thickness 16 mm / 18 mm / more than 18 mm per p / m

60/65/70 rub.

20 rubles / piece

PVC 0.4mm on chipboard 16 mm thick / more than 16 mm per running meter

55/65 p.

PVC 2mm on chipboard 16 mm thick / more than 16 mm per running meter

75/100 p.

Manual edging

100 rub / r.m.

Straight groove 4 mm / 8 mm wide per running meter

Quarter sampling 4/8 / 12mm, etc. (40 rubles per pass) per running meter

40/80/120 rub.

Diameter up to 10 mm (shelf supports, eccentric rod, confirmation, dowel)

10 rubles / piece

Diameter from 16 mm to 36 mm (for hinges)

35 rubles / piece

Packing parts in cardboard

50 rubles / m2

Packing parts in stretch film

Assembling the door of the sliding wardrobe from chipboard

1000 RUB

Assembling a wardrobe door with a mirror

1200 RUB

Assembling the door of the sliding wardrobe from chipboard and mirror

RUB 1,500

Gluing / twisting two parts

RUB 300 / m2

Calculation of a product with detailing, additives, fittings

800 rub / r.m

Straight cut

150 rubles / r.m.

Eurozapil

2000 RUB / r.m.

Bevels (edging is included in the price)

1000 rub / r.m.

Edging

500 RUB / r.m.

We offer for your attention the application form for sawing (37,00kb)

Cutting laminated chipboard according to the size of the customer wholesale and retail

Home work consists of two stages: first, the laminate is cut, and then all the material. Due to the availability of special equipment, we perform them in one stage, which significantly saves time and effort.

You can order our services on the website or by phone. We will cut the chipboard quickly, providing you with carefully processed materials that will be used in the production of durable and beautiful-looking furniture.

If necessary, we will quickly answer all your questions regarding the services and all aspects of their provision. Contact details are presented to your attention on the site.

Advantages of sawing laminated chipboard at KSPROF

There are many specialized companies in Moscow that provide processing services for materials used in furniture production. One of these is the firm "KSPROF", in which you can order sawn chipboard. In this case, we have significant advantages, including:

• significant experience;
• adequate pricing policy;
• performance of work with high quality results;
• experienced, responsible and accurate specialists;
• prompt implementation of processes;
• taking into account all the features and aspects of services;
• convenient ways payment.

Work examples