Writing desk "city. How to correctly assemble a transforming table from "Lot of Furniture"? City folding table assembly instructions

Many novice craftsmen are wondering how to assemble kitchen table without instructions, spending the minimum amount of time on all work. The easiest and fastest option is to use a ready-made tabletop and legs. Such a construction with correct installation can last long enough. There are other options for kitchen tables: completely wooden, corner, folding. All of them are assembled according to approximately the same principle.

Required tools and materials

Most often, when assembling a kitchen table, furniture board and laminated chipboard (laminated particle board). The main advantage of the first option is ease of use. On sale there is a pine board that is easy to drill and grind. You don't need a workshop to work with it - you can assemble a table right at home. There are also disadvantages to board furniture. It has to be sanded to a flat surface and additionally treated with protective coatings - impregnation and varnish.

Pay special attention to. The more this parameter is, the stronger the furniture will be. A thin tabletop without additional reinforcement can bend under the weight of objects. It is not recommended to buy a furniture board for the table, the thickness of which is less than 3 cm.

Chipboard is a more difficult material to work with: chips may form during cutting, and an edge will need to be glued to all open sections. It is easier for novice craftsmen to buy a ready-made chipboard worktop of the required size or order a saw cut and gluing of the edge when buying material in a hardware store. Chipboard also has advantages. These include a wide range of colors and a variety of textures.

To create a kitchen table, you will need furniture fittings - fasteners and ready-made supports. Sometimes a timber is additionally used. With its help, the sagging of the furniture made of the board is prevented. For this, a rectangular frame is made from a bar. This construction is called underframe. Its task is to distribute the stress that most affects the corners of the furniture. Then the table top is placed on the frame. The timber is also used as table legs.

From tools you may need a drill, screwdriver or screwdriver. The legs are often attached to the top of the table with self-tapping screws. Sometimes metal corners are used as fasteners.

Preparing for assembly

The instructions for assembling a kitchen table are simple. The first stage is preparatory. It starts with. First you need to decide how many people the table will be designed for. One seat is about 60 cm. Thus, the length of a table for 4 people will be about 1.2 m. The width depends on the area of \u200b\u200bthe kitchen. For small rooms, it can be 75-80 cm.

Professional assemblers, including desks, will depend on the type of construction. It is easier and faster to work with ready-made furniture supports. In this case, all work will consist of labeling for fasteners and installation. It is best to use the adjustable feet. Such supports can be set to the desired height after leveling the table top. These legs are suitable for those with uneven floors. Alternatively, you can make a table with two props. They are sold in furniture fittings stores.

Assembly stages

Let's consider how to assemble a kitchen table with chrome legs. This option is simple and applicable to any countertop. First, let's put down marks for the subsequent screwing of the legs. Lean the mount to the tabletop and mark the points for the screws with a pencil. After that, you need to screw the mount. To do this, you need a screwdriver or screwdriver. Then you need to mount a leg in the attachment point. It can be easily screwed into a special hole in the center. Similar actions need to be done with the rest of the supports.

A more difficult question is how to screw the legs to a wooden kitchen table. Such a design is much more complicated to assemble, since you need to think over the types of connections.

The classic is strengthened with a special underframe, which is a frame made of timber. The minimum height of each plank is 12 cm and the thickness is 3 cm.

If the legs are made of timber, then their cross-section should not be less than 6x6 cm. Traditionally, the whole structure is assembled for a thorn-groove connection. Then a metal corner is used to fasten the strips and legs. After that, proceed to the installation of the countertop. It can be connected to the underframe using screws.

Features of the assembly of the corner structure

The corner table is suitable for small kitchen... This model saves space and looks quite unusual. To design a corner table, you need a table top and 2 or 3 legs.

How to assemble a corner kitchen table (instructions and step by step guide):

Mark the length and width of the future countertop on the furniture board (both parameters are measured from the corner). Connect the two resulting points with a straight line or arc. The table cut can also be made curved.
Saw out the resulting shape with a jigsaw. Sand all edges with sandpaper.
Place the leg against the table top and mark the attachment points.
Screw the legs to the top of the table using self-tapping screws.
If corner table only 2 legs, then for greater stability it can be additionally attached to the wall.

Another option to save space is to make it a continuation corner kitchen... This design is multifunctional and easy to implement. The table can be used as an additional work surface or to take food at it.

How to assemble folding table for a corner kitchen:

Prepare your countertop. Of furniture board with a small thickness, use a jigsaw to cut a semicircle of the desired size.
Go over the cuts with fine-grained sandpaper.
Saw a rectangle 12 cm wide and equal to the length of the table top. Sand the edges with sandpaper.
Saw out the future support - 2 rectangles 20 cm wide and slightly shorter than the top. Saw one part diagonally into 2 triangles. Sand all edges with sandpaper.
Connect the countertop and the first piece. For this, loops are applied in the upper corners, which are then screwed on with self-tapping screws.
Place one triangle in the middle of the rectangle. Connect the parts with a long fastening loop. The triangle should be flexible and easy to slide to the side.
Attach the support to the wall at the desired height. Place the countertop on a support and connect them at the top center with self-tapping screws.

In the "Much Mebeli" store, a transforming table is usually sold assembled. In order not to waste cash to the work of the master, you can assemble it yourself. As expected, instructions for assembling the table come with each model, but sometimes it can be difficult to understand it without assistance. Therefore, it is better to use photos and videos, which describe in detail each stage of the work.

Assembled table Disassembled

Table assembly diagram

The transforming table from "Much Furniture" should be assembled in stages, starting with the legs. The drawings show in detail how the parts are twisted. It is worth noting that the assembly must necessarily take place according to technology, otherwise the furniture will not be able to serve you for the due period. In general, the tables are assembled according to the following plan:

Legs.
Worktop lifting mechanism.
Table frame.
Additional shelves and drawers (if available).

Knowing how to assemble a transforming table from "Lots of Furniture" using a video, you will cope with this task in a few hours. To simplify the process, you can use a screwdriver and a ruler with a pencil to make marks. Perhaps it will not be very convenient to do this alone, the help of a friend will not be superfluous, at least in order to hold some elements of the table.

Assembly features

Be sure to securely tighten all bolts in the mechanisms. Since the table will unfold all the time, you need to take care of its strength in advance. Assembling a transformer table from Lots of Furniture will not take much time if you follow the instructions.

Study the assembly diagram carefully and do everything as indicated in it. Even small deviations will change the quality of the table's operation.

Assembling the table legs Assembled base Screwing the legs to the body Fixed spring in the table
Transformation mechanism in non-working condition Mount a smaller part of the tabletop Fix the upper movable part Hide the hinge for fixing

Remember there are different kinds original tables of transformers. When buying a certain model and assembling it using a video, make sure that it contains exactly the item you need. In general, most of them are similar, but even some decorative elements can ruin it. appearance... The most popular models today are:

Dolphin;
Caesar;
Levmar;
Demi.

When assembling a transformer table, the question often arises: how can the mechanisms withstand such heavy tabletops? This is not unusual, because their strength is in no way inferior to the sofa options. They can withstand a lot of weight, and their manufacturer's specified lifespan will surprise any buyer. Steel fasteners do not diverge even after many years of daily use, the main thing is to firmly fix them.

Self-assembly requires sufficient physical strength. A weak woman is unlikely to be able to tighten the bolts and nuts well enough, so men should do this business. Tables from Lots of Furniture have been and remain one of the highest quality and most reliable, and that is why they are so popular. Having collected the model you like, you will understand that you were not mistaken with your choice.

You can buy a writing desk "CITY" inexpensively in our online store! The writing desk "CITY" is excellent and most importantly inexpensive option, both for your office and for home. A table with a great design. The selected color of the table material, and the design - all this will contribute to fruitful work or study, both at home and in the office. The CITY table has 4 comfortable drawers one of which is under the tabletop, and the other three are on the right. There is also a convenient niche under the table.

Table dimensions :

Width 1200 mm
Depth 600 mm
Height 750 mm

Facade material laminated chipboard

Laminated chipboard body material

Execution color:

option: Wenge / Belfort

Writing desk "CITY" :

CHARACTERISTICS Writing desk "CITY"

Table dimensions :

Width 1200 mm
Depth 600 mm
Height 750 mm

Facade material laminated chipboard

Laminated chipboard body material

Execution color:

option: Wenge / Belfort
option: Ash shimo dark / light

Writing desk "CITY" available in color options:

Delivery

You can order delivery from us or pick up the selected product from the warehouse yourself in Moscow.

Delivery hassle-free! Check out our delivery terms - we will deliver the selected product directly to your address.

Delivery within Moscow within the Moscow Ring Road: 900,00 rubles. to the entrance

Delivery outside the Moscow Ring Road to RUB 900.00. plus RUB 30.00 for 1 km.

Pickup from a warehouse in Mytischi

Delivery in Russia by transport companies

Rise

Rise without elevator 1 (one) package for 1 (one) floor 60.00 rubles.

Rise by elevator \u003d 1 (one) package 120 rubles (any floor)

Purchase returns

When you receive your order, carefully check its contents and colors.

Be careful! Immediately inform the driver if the product does not match the one you ordered or if there is a defect.

In the event of a defect or incompleteness of the product after shipment, re-delivery is carried out at the expense of the buyer.

Our furniture manufacturing company"FURNITURE TO YOUR TASTE" provides professional furniture assembly services.

Assembly is 10% of the cost, but not less than 1500 rubles.

Additional assembly work is paid separately.

You can check with our managers for more detailed information on the cost of assembly.

It is possible to schedule an assembly the very next day after delivery (depending on the workload of the assemblers). The departure of the pickers is agreed with the manager in advance.

The buyer has the right to carry out the assembly himself, according to the attached instructions.

Before assembling, be sure to make sure it matches your order.

Remember, the purchased product can be returned only disassembled, without any traces of assembly attempts!

Be careful when opening the goods, keep the packaging until you are completely sure that your order came to the right color and equipment. The packing is carried out independently.

Attention! In case of non-professional assembly, defects may occur, which will void the warranty.

Milk-colored transforming dining table for guests

For a small apartment, such furniture as a transforming table is irreplaceable. It can be easily transformed from a compact coffee table into a full-fledged dining table for several people.

The coffee table easily converts into a full-fledged table for receiving guests

Read our instructions and make sure that assembling the transforming table is very easy.

Dining and magazine options transforming table with dimensions

Necessary tools for furniture assembly

To successfully assemble the transformer, you will need:

phillips screwdriver or screwdriver with attachments;
hammer for furniture;
fasteners and accessories included in the delivery set.

Detail of the table frame and its legs

Box with fittings and fasteners

Despite the many proposals on the furniture market, the process of most manufacturers consists of the following stages:

Assembling the case

We collect the corner legs of our table

All legs for the table-transformer assembly

Corner legs of two halves are connected with screws or eccentrics. The body is assembled from long and short sidebars in the same way.

Detailed body assembly process

We fasten the legs to the body according to the instructions

IMPORTANT! On the legs and sidebars, special holes are made for the simultaneous installation of the lift and the screed of the entire structure. Check after assembly to see if they match.

Assembled base with legs

Nail the plastic heels to the bottom ends of the legs. Install shock absorbers on the upper ends of the drawers to soften the impact of the tabletop when it is folded.

We nail heel cushions to the legs

Installation of the lifting mechanism

Lifting mechanism installation diagram

Bring the lift to working position. For this:

Fixed springs for the operation of the table-transformer mechanism

Mechanism in a quiet, unfolded state

IMPORTANT! The legs of the holders for the folding tabletop are higher than those for the underframe.

The mechanism for bringing the table to the upper position

Installation of table top and underframe

We mount a smaller part of the tabletop

Installing the base for a large part of the countertop

Screw the bottom flap of the booktop and the underframe to the carrier platforms. Install shock absorbers on the outside of the underframe to absorb the shock when unfolding the tabletop. Moving from outside to inside, fold the legs of the lift into the box. It will close with the bottom of the countertop.

We fix the upper movable part of the tabletop

Install the other half from above so that the end holes for the hidden hinges are on one side, and their center-to-center distance is minimal (about 14 mm). Insert the hinges carefully and secure with screws.

Hidden hinges for fixing the assembled table

The table you assembled will last a long time. Do not forget to tighten its fasteners once a year, clean the surface with a dry soft cloth or special furniture polish.

Coffee option or folded table

The process of transforming a table from a coffee table to a table for receiving guests

Dining option or unfolded table