How to wash the foam ceiling. How and what to clean the foam ceiling tiles in the kitchen? Folk remedies for cleaning the ceiling in the kitchen

The market for building products today offers a huge selection of ceilings. One of these options is ceiling tiles, which are the most popular in recent years, due to their cost-effectiveness and quick installation.

With its help, you can give the desired look both to your office and to your apartment or house. But what to do when a seemingly whole and solid tile is covered with a layer of dust or spots?

Due to the fact that there are several types of tiles, each of them requires a certain type of care.

Types of tiles and care products

Ceiling tiles have appeared relatively recently, but have already earned the gratitude of buyers. For its manufacture, a variety of materials are used, which largely determine chemical composition the means used. You can hit the specifics, studying all these features, or use neutral compositions, which we recommend throughout the article.

But besides beauty, you should take into account that different types of ceiling tiles need their own special type of care. And, before you buy your favorite, think about whether you can take care of it properly.

• . To do this, use a regular sponge, warm water and soap. Please note that the planks must not be filled with water.

• Not laminated... This includes many models, but first of all these are options made from foam and expanded polystyrene. A dry cloth or a vacuum cleaner with a soft attachment will be enough. In case of small stains, take a regular eraser and wipe the dirty area thoroughly.

• Mirror (glass)... Mainly used in bathrooms and bedrooms. In the first case, it is often affected by moisture, therefore, it is advisable to wipe it more often with a dry cloth, and then soaked in special means for caring for mirrors. In the bedroom, the tiles do not get dirty so quickly, so it will be enough to wipe them at least once a week with special mirrors. About the same you need to take care of mirrors.

• Wooden... The wood surface treated with impregnations and varnish is not afraid of moisture, but you should still avoid getting it between the seams and in the cracks. For intermediate cleaning, we use a dry, soft, lint-free cloth, and for major cleaning - a well-wrung out sponge and soap solution.

• Ceiling gypsum fiber panels for ceilings "Armstrong" are also, in fact, tiles. Washing is not advisable. Only dry cleaning is carried out. With capital pollution individual elements the ceiling can be simply replaced with new ones.

Council. Purchase a cooker hood - it will keep your kitchen ceiling looking fresh for longer. If the tile turns yellow, just paint it white water-based paint... For painting, use a foam roller - this will help the paint to lay down more evenly.

In what case, what means are used?

The choice of a ceiling care product depends not only on its type, but also on what type of pollution has appeared:

• Vacuum cleaner... A huge plus when cleaning with a vacuum cleaner is physical ease.

In addition, the vacuum cleaner saves you a lot of time and does not leave behind dirty marks. If your neighbors don't fill you in, you don't have rust stains on the white surface of the ceiling, then a vacuum cleaner is the best solution. It will be enough to walk once a month with a soft brush on the surface, and you will forget about "wet" cleaning forever.

• Brush. Great for embossed tiles, as dust traps in the grooves, and only the bristle of the brush can cope with this problem. Of course, during cleaning with a brush, all the dust that has accumulated on the ceiling will fall on the floor and furniture, but there is nowhere to go.

• Mop. It is used for major washing of moisture-resistant surfaces. As in other cases, rags and sponges wring out well.

• Detergents. This method is used in the event that you do not know how to wash ceiling tiles... As a rule, use the usual detergents that you use at home. The emphasis should be placed on liquid detergents, since powder detergents contain abrasive particles - they can damage the surface.

How to wash with liquid detergents?

There is nothing difficult in this procedure, the main thing is to follow the procedure:

• We take a soft cloth or sponge;
• We dilute the soap solution with detergent;
• Thoroughly wring out the moistened rag and wash off the dirt with light movements;
• Be careful not to leave moisture on the tiles - after drying. She will leave dirty footprints;
• Remove excess moisture with tissues or regular toilet paper.

Council. Do not use chemical solvents - tiles are made of plastic materials that can be damaged by such means.

During renovation

If you are planning a renovation, then you may have a situation where you will not know how to wash, since traces of putty or glue will remain on it. In this case, regular cleaning will not help - you will have to take up the spatula. But be extremely careful not to spoil the surface of the material.

Which is better - dry cleaning or wet cleaning

Before cleaning the ceiling tiles, make sure that there is no other way to do it. Wet cleaning is a last resort and there are several reasons for this: the material, having saturated moisture, can change color; residual marks and stains are possible.

To maintain order, just vacuum or brush the ceiling once a month, and you can keep the surface intact for much longer. When washing, you put pressure on the surface, creating mechanical damage.

Even if the ceiling material is not afraid of direct exposure to water, it must be observed in all measure.

Such a tile is only for replacement, it will not work to clean it

If aggressive stains (coffee, ketchup, rusty stains, etc.) get on the surface, try soaking them with whiteness. Then white surfaces can be whitened with water-based paint.

Conclusion

Simplifies cleaning weekly dust removal from gouges and bumps (if the tiles are embossed) - this makes your job easier. If you have not washed the surface for a long time, you will have to use liquid detergents or special alcohol-based detergents, in the case when you have a mirror tile on the ceiling.

Experts advise to clean the tiles from dust and other contaminants once a week, since this time period is considered optimal for removal - you can easily remove it with a regular brush or vacuum cleaner, without using “heavy artillery” in the form of a rag and a sponge.

Such cleaning can be done every few months, but be careful not to press hard on the surface so as not to damage it. And carefully remove excess moisture so that there are no streaks or dirty spots. These are the basic guidelines on how to remove minor dirt and tricky stains from ceiling tiles. Keep your home clean to keep its occupants comfortable and healthy.

Suspended ceiling structures have many advantages - they hide the flaws of the base surface, engineering Communication, are quickly mounted and are suitable for installing any lighting fixtures... But sooner or later, the owners of such ceiling structures have the question of how to wash the suspended ceiling. Depending on the ceiling tiles used, different ways surface cleaning and detergents. one

Some products cannot be washed at all, so other methods are used for cleaning. We will tell you how to clean your Styrofoam ceiling tiles and how to clean Armstrong suspended ceilings.

Cleaners for washable false ceiling tiles

Before cleaning your ceiling tiles, stock up on the necessary tools and fixtures.

To work you will need:

• bucket with water;
• a stepladder or scaffold (the last device is more convenient, because you can put a bucket of water and detergents on it, which will save you from the need to constantly go down and up an elevation);
• rubber gloves;
• protective glasses;
• rags and kitchen sponges;
• detergents;
• long-handled brush or mop.

If stains and streaks appear on the surface of the ceiling, the question arises of how to wash the foam ceiling tiles. Do not use coarse abrasive products or hard brushes to clean foam tiles, as the surface can be damaged.

It is best to use liquid laundry gels or dish detergents for these purposes. They dissolve grease and other dirt well and do not damage the tile surface. If desired, the ceiling can be washed with hair shampoo.

Important! It is forbidden to use products containing solvents to clean tiles, because they react with the foam and destroy it.

Stamped ceiling tiles are looser, so they cannot be wetted too much, which means that the sponge or rag must be wrung out well. Injection and extruded tiles are moisture resistant, so they are not so whimsical in the choice of detergents.

If you are not sure what and how to clean a suspended ceiling, start with a soapy solution. To do this, dissolve the grated laundry soap in water. It is better to clean loose products with soapy foam, not a solution, so the material will not absorb water very much.

In this case, the following sequence of work is adhered to:

1. Using a rag or sponge, gently apply soap suds to the coating and lightly wipe dirty areas. In this case, it is not necessary to exert strong mechanical stress and actively rub the product.
2. After that, the ceiling is gently wiped with a dry cloth to remove the remains of soapy water and water.
3. If water drops or foam are visible on the coating, then the slabs are wiped with paper towels or toilet paper to collect the last moisture. Otherwise, visible streaks may remain after drying.

Advice! If you cannot return the tiles to their original beauty, surface whiteness or get rid of stubborn dirt, just paint the ceiling with interior paint in two layers, since many types of ceiling tiles are allowed to be painted and repainted several times.

How to clean non-washable false ceiling tiles

The question of how to wash suspended ceilings disappears by itself if non-washable ceiling tiles are used. In such a situation, only dry methods of surface cleaning are used. The easiest way to do dry cleaning is with a vacuum cleaner. To do this, set the unit to minimum power and attach the soft furniture cleaning nozzle. Do not scrub the tiles too vigorously, just sweep the surface with a vacuum cleaner to collect dust.

The special Duster brush is also suitable for dry cleaning. It is suitable for cleaning embossed tiles, since the long soft bristles of the product easily penetrate into all recesses and hard to reach places... The principle of operation of the brush is based on the fact that negatively charged bristles attract dust from the surface and prevent it from flying in the air and settling on other planes.

Advice! Some suspended ceiling tile manufacturers recommend using a regular eraser to clean their products. A stationery eraser will handle even stubborn dirt.

Step-by-step technology for cleaning a false ceiling

We have described how to wash the ceiling tiles, but some types of dirt are very difficult to remove from both washable and non-washable products. This is a tile adhesive that gets on the surface when the coating is glued. Fresh glue is recommended to be quickly washed with a dry cloth without using water or any detergents.

If you do not have time to erase the glue, and it has dried, then getting rid of it is more difficult. To clean it, use a spatula, which is handled very carefully so as not to damage the ceiling covering.

To wash glossy coatings, use only microfiber cloths, suede rags or special cleaning wipes. After that, to give the surface its initial shine, it is rubbed with a cloth dipped in ammonia. Then the slab is polished with a dry cloth.

Pre-made foam tile cleaners

Washable suspended ceilings can be cleaned with ready-made detergents. In addition to the listed formulations (washing gel, shampoo, detergent for dishes), you you can use the following:

• Special detergents for ceilings are more expensive than conventional tools at hand, but they protect the surface from damage and remove various dirt well.
• Liquid detergent sprays containing ammonia for washing glasses, mirrors and plastic products are also suitable for these purposes.
• On sale you can find special sponges for removing grease and soot on the kitchen ceiling. They are impregnated with a special composition, which greatly facilitates the work of cleaning the ceiling surface.

Advice! Before using any detergent, test it on an inconspicuous area, such as a corner or behind a cabinet.

Cleaning tiles with improvised means

To remove stubborn dirt from foam tiles and suspended ceilings at home, you can prepare the following:

1. The fastest way to make soap suds is to dissolve dishwashing detergent instead of grated soap in water.
2. The following cleaning solution will also help - dissolve a tablespoon of ordinary salt in three liters of water. Soak a kitchen sponge in this solution and squeeze well. Then rub the surface of the tile. The solution helps to get rid of the yellowness of the surface.
3. To bring back the snow-white look of white foam tiles, you can prepare a solution from a mixture of water and bleach. Please note, however, that this product is only allowed to be used on white items.
4. To remove stubborn dirt, you can use alcohol, just first check its effect on an inconspicuous part of the ceiling.

Safety precautions when working with detergents

Now you know how to wash your ceiling tiles. Care must be taken when using water and detergents as it is easy to slip and fall on wet floors. You should be especially careful when working on a ladder or scaffold. Slippery feet can cause falls and severe injury.

To prevent this from happening, cover the floor, scaffold or step-ladder with old towels or sheets folded in several layers. The fabric will absorb moisture quickly and prevent slipping.

Important! Also, during work, you need to protect your eyes and hands. Some detergents in contact with the eyes can cause severe burning and damage to the mucous membranes. That is why it is recommended to use protective goggles. Rubber gloves should be worn to protect your hands, as caustic compounds can irritate the skin or dry out the skin.

So that you do not have to constantly climb and climb off a ladder or scaffold in search of a sponge, rags or a jar of detergent, put on an apron with large pockets in which you can place all the necessary materials at hand. In addition, the apron will additionally protect your clothes from dirt.

Ceiling tiles are made from different materials, but in any case, it is a decoration of every home. In addition, its functions include not only improving the aesthetic appearance of the room, but also warming the ceiling, hiding irregularities, and sound insulation.

In order for it to retain its appearance longer, every housewife should know how and with what to wash the ceiling tiles.

Depending on the material used, the tiles are of the following types:

1. Foam - it is made of expanded polystyrene. This view is the most common in view of its democratic wall and a wide variety of patterns.
2. Metal - different types of light metals are used for manufacturing. Due to its high price, metal tiles are less in demand.
3. Wooden - made from various types of wood.

According to the manufacturing method, they are distinguished:

• pressed or stamped ceiling tiles;
• injection ceiling tiles;
• extruded or extruded ceiling tiles.

Let's consider each type in more detail.

Pressed ceiling tiles

In the production of stamped tiles, foam blocks are used that are pressed... As a result of stamping, the thickness of such a product is 6 to 8 millimeters.

The appearance of the stamped tiles impresses with its beauty and variety. However, it should be noted that the quality of products remains at a rather low level and, as a result, the price range is also appropriate.

Because of its fragility consumption of pressed tiles is higherthan other types, and in the case of cutting, it is almost impossible to achieve even edges. It is recommended to purchase it with a margin.

Upon closer examination, you will notice that the product is rather loose, hygroscopic - therefore, it will absorb any pollution well. Before purchasing it, you must first study the information on how to wash the foam ceiling tiles, since care will be needed here very carefully. Sometimes sellers in hardware stores may advise you to paint such a ceiling with water-based paint.

Important! Before proceeding with gluing the pressed tiles, it is recommended to additionally dry them in a warm dry room. Otherwise, unnecessary gaps may form after sticking it on the ceiling.

Injection ceiling tiles

Also made from expanded polystyrene, only in this case the material is subjected to high temperature treatment... As a result of such sintering, a tile with a thickness of up to 14 mm... Its pattern is deep and clear, and the edges are absolutely even. Thanks to this, the ceiling looks like a single whole, without seams.

Injection ceiling tiles have a number of positive properties. It has good sound insulation; is moisture and heat resistant; has good strength. It is produced exclusively in white, which allows painting in any color.

Often, injection tiles are used to decorate not only the ceiling, but also the walls. It looks pretty creative, because it can be made with a film with imitation of marble, wood and other textures.

The only drawback in this case is the price of tiles is 3-4 times higher than that of stamped tiles... But the stated price still matches the quality.

Important! From hitting straight sun rays injection ceiling tiles turn yellow over time.

Extruded (extruded) ceiling tiles

The result is extruded polystyrene strip pressing... Such a tile has a thickness of only 2-3 mm, but at the same time it is the most durable and reliable.

By its structure, extrusion ceiling tiles stands out for lack of grain - it is smooth and, most often, covered with a laminating film and a water-repellent solution. Is an ideal option for kitchen.

The shape of the tile is slightly convex-concave, which perfectly hides small irregularities in the ceiling without additional preparation. The edges cut beautifully for a seamless effect. Easily restores its original shape after deformation.

Available in a wide variety of colors, with or without patterns. It is not recommended to paint additionally. Not demanding in leaving. The price is quite high, but it matches the quality.

Reference. Despite the fact that the composition the listed types the ceiling tile includes styrene - far from an environmentally friendly material, it begins to release its toxic substances only when high temperatures, namely - in case of fires.

Reasons for soiling ceiling tiles

There can be many reasons for ceiling pollution. First of all, before gluing the ceiling tiles, you need to carefully examine the ceiling for the presence microcracks and, if found, cover them up. The fact is that moisture can collect through such cracks, which will negatively affect the foam ceiling tiles. Inspection of the roof will also be useful - perhaps the roof is leaking.

Another cause of contamination could be high humidityin home. This largely depends on the location of the house and its age. Typically, in such cases, streaks may appear on the ceiling, as well as fungus and mold. It is recommended to provide good ventilation and regularly ventilate the premises.

In the summer, insects, especially flies, leave traces of their vital activity on the ceiling tiles. There is only one solution here - a mosquito net on the windows and entrance doors.

Dust, tobacco smoke, greasy stains - all this easily becomes the cause of stains on the ceiling, especially in the kitchen. Separately, it should be said about tile glue, which can leave its marks on the tiles from inaccurate gluing.

In any case, the ceiling itself will not clear. Therefore, do not delay time, but immediately remove contamination until they become persistent and difficult to remove. You can read about how to clean your styrofoam ceiling tiles below.

How and what to wash the foam ceiling

If you understand the intricacies of caring for a ceiling tile, it will not be difficult to wash it. Before washing the foam ceiling, each housewife should prepare the following tools at hand:

• bucket;
• latex gloves;
• rags or sponges;
• protective glasses;
• stepladder;
• detergents;
• long-handled mop or brush.

Care must be taken when cleaning, slowly, without making significant mechanical efforts So, how to clean the foam ceiling tiles from different types of contamination?

General principles for cleaning a foam ceiling

Vacuum cleaner - the first assistant

The easiest way is dry cleaning, which will not take a lot of time from the hostess. Provided that there are no streaks or stains on the ceiling, it is sufficient to vacuum it once a month. For this, a special furniture attachment is used.

When using the vacuum cleaner for the first time, the power is first set to minimum level... If the dust is not sucked up well enough, and the tile does not lag behind the ceiling, you can try to increase it until the optimal mode is found. In the future, vacuuming the ceiling should be in this mode.

Dust Brush - Duster

There is another way to clean your styrofoam ceiling tile. If the tile is embossed enough, in this case it will help special soft brush for dry cleaning: it sweeps away dust well from recesses and hard-to-reach recesses.

The principle of operation of this brush is such that with its huge number of hairs that have a negative static charge, it attracts positively charged dust. In this case, the dust is not dispersed in the air, but remains on the brush. That is why many housewives prefer the duster brush instead of a vacuum cleaner.

Wet cleaning

There may always come a time when the vacuum cleaner and brush are powerless to remove stains. In this case, it will be necessary to know how and how to wash the foam ceiling tile, because its varieties can react somewhat differently to washing.

In no case do not use harsh cleaning agentshaving an abrasive component, since the surface of the tile can be injured. Dishwashing detergent, which is good at removing grease and stains, or a liquid laundry detergent is best. Some housewives even use hair shampoo.

Attention! Ceiling tiles of any kind are destroyed by chemical solvents. In no case should such solvents remove stains from the foam ceiling.

Extruded and injection ceiling tiles are less whimsical to clean than stamped ones. The latter, due to its high hygroscopicity, absorbs water well, therefore, when wet cleaning, a rag or sponge should be wrung out very well. This cleaning is best done as little as possible, in case of emergency.

Before cleaning the tiles on the ceiling, it is recommended to beat the soap solution into a strong foam... Apply this foam with a sponge (rag) to the contaminated surface and wipe it gently, without exerting a large mechanical effect on the ceiling material. If, after that, water remains in the structure of the relief, they should be removed by wiping with a paper napkin or toilet paper, otherwise visible dirty stains will remain on the ceiling after drying.

Reference. Ceiling tile manufacturers themselves recommend using a regular stationery eraser to remove stains.

How to clean glue from ceiling tiles

Sometimes, during repairs, traces of putty or glue may remain on the ceiling. Then a natural question arises: how to clean the ceiling from tile adhesive and other materials? If their traces are still fresh, then the tiles can be simply wipe with a dry cloth, without water and detergents. If the foreign material dries up, only putty knife, which will have to act very carefully so as not to damage the foam.

How to clean your Styrofoam ceiling tiles in your kitchen

Over time, the tiles glued in the kitchen develop plaque and stains from grease and soot. This is a natural process, especially in the absence of a hood. So, how to clean the foam ceiling in the kitchen?

The easiest way is to buy special sponge for removing soot and plaque... It is impregnated with a special substance that makes cleaning the kitchen much easier.

If the stains on the ceiling are fresh, dilute with water dishwashing liquid and the resulting foam to wipe off the dirt.

Before washing the foam tile ceiling, you can prepare a cleaning solution at home: add one tablespoon of salt - sodium orthophosphate to 3 liters of water... Dip a sponge into this solution, squeeze out a little so that water does not drain and press to wet the contaminated tile surface until the yellowness is removed.

One of the tried-and-true methods by housewives than to clean the foam ceiling tiles in the kitchen is to use bleach water mixture, but only if the tile white.

If it is necessary to remove old stains, it is permissible to use alcohol.

Taking into account the peculiarities of the foam ceiling tiles, we can conclude that the "dry" method is preferable for regular cleaning. And wet cleaning should be done when you cannot do without it. Vacuuming monthly will help keep appearance tiles and relieve the hostess of the "wet" hassle.

Ceiling tiles are often dusty. And in a room where they cook a lot, particles of fat and soot also stick to it. To clean the foam ceiling tiles in the kitchen, you need to arm yourself with a set of special tools and accessories. Be sure to have store-bought cleaning products on hand. Get rid of unpleasant odor and soot will help folk recipes... But tile washing can be avoided if preventive measures are followed regularly.

Why is the ceiling tile in the kitchen dirty?

Styrofoam ceiling tiles in the kitchen get dirty easily

The type and quality of the ceiling covering determines its soiling and ability to cleanse.

Extruded the tiles are equipped with a dustproof and water-repellent layer. Thanks to this, soot and other stubborn dirt does not stick to it. It is more durable and reliable. After deformation, it returns to its original form. Cleaning such a tile is not difficult.

Stamped Foam Plates have a porous structure. Because of this, they freely absorb kitchen odors, vapors and splashes, which are extremely difficult to wipe off. This type of tile should not be glued in the kitchen. And if this happens, it is necessary to regularly clean it of fresh dirt so that you do not have to struggle with old grease and soot in vain.

Injection or seamless ceiling material not afraid of moisture, so it can be washed with water and detergents. It turns yellow from direct sunlight.

The most common causes of tile soiling are:

• High indoor humidity... Due to moisture, the ceiling coating is attacked by fungus and mold, stains appear. To avoid this, before gluing the tiles, it is necessary to cover up all microcracks in the ceiling. Frequent airing and well-functioning ventilation will remove excess moisture in the kitchen.
• Insects... Dots from flies look extremely unpleasant on the ceiling. The best protection against them is a mosquito net.
• Dust and grease... It is very difficult to avoid this contamination in the kitchen. Dust flies all over the place, but in the kitchen it becomes greasy and sticky. Therefore, it is more difficult to get rid of it.
• Cigarette smoke... To prevent the foam from getting saturated unpleasant odor, do not allow anyone to smoke in the kitchen.

Deposits accumulated over the years are much more difficult to wash off than fresh dirt. To keep your kitchen ceiling looking fresh, you need to get in the habit of wiping it off once a month or two.

Due to the accumulation of static electricity, the foam attracts dust and debris. Therefore, such a tile gets dirty much more often than an ordinary whitewashed ceiling. And due to the fact that a large amount of vapors and fat soars in the kitchen air, they settle on the ceiling as well. At the same time, dirt can be replaced especially clearly on a smooth, shiny surface.

Under no circumstances should the ceiling tiles be washed with solvents.

Foam Ceiling Tile Cleaning Tools

A vacuum cleaner can collect surface dirt from ceiling tiles

To clean the foam tiles on the ceiling, you need to stock up on a set of tools suitable for this particular case. In work you will need:

• Vacuum cleaner with soft fluffy brush... It is used to pre-clean the ceiling from dust and cobwebs.
• Soft raglint-free.
• Dishwashing sponges... If the area of \u200b\u200bcontamination is large, then a lot of them will be needed.
• Highly absorbent dry rag.
• Paper towels or napkins... They are needed to absorb excess moisture.
• Stepladder.
  
• Fluffy bristle brush, to remove yellowness and grease in hard-to-reach places. The Duster special dust brush will be an indispensable tool for dry cleaning. Its negatively charged soft bristles collect and trap dust.
• A bucket or bowl of warm water... It will be needed for wet cleaning.
• Special sponges for washing dirt from foam. They are impregnated with special compounds and easily remove soot and other impurities from the ceiling.
• Rubber gloves.
• Protective glasses... When working with chemicals, it is better to protect your eyes from the ingress of components harmful to health. Moreover, during cleaning, you constantly have to look up.
• Putty knife... After repairs, when drops of glue or putty got on the tile, you cannot do without this device. You need to act carefully and carefully so as not to damage the coating.

The sponges should be soft so as not to damage the foam
A spatula is needed to remove traces of glue and putty. Eyes and hands must be protected from dust and cleaning agents.


To clean the foam tile ceiling properly, you should not rush and use force. Such actions only harm the coating.

An important condition in order to clean the ceiling, and not rub dirt into it: you need to change the sponges often. They quickly become clogged with soot and, instead of cleaning, smear grease.

Household chemicals for foam tiles

If the foam ceiling is so dirty that it is not possible to clean it with a dry method, they resort to wet cleaning. Areas stained with grease and soot are best washed with compounds that can destroy the oily structure of the stain:

• Dishwashing liquid: Myth, Fancy, Fairy, Frosch, Eared nanny, Sorty, Sarma, Surprise for Cinderella, Help, I was born, The world of childhood. In most cases, their aqueous solution can easily wash off most of the stains and soot on the ceiling. This mixture is whipped into a thick foam. Only it is applied to the surface to be treated, not water. At the same time, they do not press and rub with force. The foamed mass is only slightly driven in. And if suddenly there is water on the tile, it is removed with paper towels or napkins. Otherwise, gray streaks will appear on the coating.
• Gels for washing clothes without bleach in the composition: Eared nanny, Laska, Persil, Ariel, Gloss, Pemos, Dreft.
• Hair shampoos... The simplest one, bought in a store, is suitable for this purpose. To do this, it is diluted with water and whipped until a thick foam is formed, with which the surface is cleaned.





Hardware and hardware stores also sell special formulations, made for cleaning ceilings of various qualities. The sales assistant will tell you what is the best choice for washing a particular type of tile.

Before using any of the listed means, its solution is applied to an inconspicuous area of \u200b\u200bthe coating, and the reaction is monitored. For this, unused pieces of ceiling tiles are also used. If no undesirable reaction occurs, then the product is suitable for this type of coating.

Washing powders are not used for cleaning false ceiling... Even a small particle that does not dissolve in water can leave scratches and irrevocably spoil the appearance of the kitchen ceiling.

Folk remedies for cleaning the ceiling in the kitchen

If there is no desire to use chemistry, then the products used in food preparation can help in the fight against pollution just as well. Moreover, they are safe for health:

• Salt... 1 tbsp. l. diluted in 5 liters of water. A sponge is moistened in the solution and evenly applied to the stain. Do not wash off. The procedure is repeated several times until the other color completely disappears.
• Vinegar... It is mixed with water in a 1: 1 ratio. Places that have absorbed kitchen odors especially strongly are washed with liquid. Do not wash off.
• Acetic acid... In the fight against old stains, use it undiluted. A sponge is moistened in a liquid and problem areas are wiped. At the same time, they remember about safety precautions. They put gloves on their hands, glasses and a mask on their face. And do not forget to turn on the hood and open the windows.
• Alcohol... It is moistened with a clean white rag, and the stains are wiped in a circular motion. The procedure is repeated several times if necessary. Having achieved the desired result, the ceiling is washed with water and dried.
• Eraser... Manufacturers themselves recommend removing fresh stains with this stationery. Although it is not used in the food industry, the eraser is harmless to human health.

The chemical industry does not manufacture anything special for cleaning foam tiles. Therefore, self-made products are no worse than compositions from a hardware store.

Only lightly moisten the sponge with the cleaning agent. If the liquid drips down during washing, it means that the ceiling will be covered with wet spots, which will ruin the appearance of the tiles.

Cleaning steps



Hard-to-reach places can be reached with a long-handled brush

A certain sequence should be followed in removing dirt from the ceiling. This is necessary in order not to waste time redoing your own mistakes. Here's how to proceed:

1. The entire surface of the ceiling is vacuumed to remove dry dust, cobwebs.
2. In hard-to-reach places, they can be reached with a soft bristle brush and a long handle.
3. Dirty stains are wiped off with a dry cloth or sponge.
4. Wet cleaning. With help household chemicals or folk remedies remove greasy stains.
5. Wash off extraneous odors. For this, homemade recipes are used.

If you arm yourself with the necessary tools, means, and set yourself the goal of cleaning the ceiling, then everything will work out. The difficulty lies in the fact that the hands quickly get tired of working in this position. Therefore, you will have to rest often.

Styrofoam ceiling can transform the most modest room in the house. With this design, it becomes more beautiful, taller, lighter, more spacious. The advantages are complemented by the ability to hide irregularities, sound insulation and a reasonable price. But the ceiling in the kitchen quickly becomes dirty, and therefore requires special care. In order for the expanded polystyrene surface to remain fresh for a long time, it is necessary to keep it clean. Consider effective wayshow to clean your ceiling tiles and fix existing stains.

General rules for cleaning foam tiles

Polystyrene is capable of accumulating electrostatic charges and attracting small particles: dust, dirt, microelements from tobacco smoke. As a result, the tile ceiling gets dirty. Methods for removing dust and dirt depend on the type of coating:

• Pressed (stamped)- high porosity and hygroscopicity, gets dirty most quickly and strongly. For tidying up, it is advisable to dry clean. Washing should be done infrequently and only in exceptional cases.
• Injection - moisture resistant, usually has a deep embossed pattern. It is produced mainly in white and may turn yellow over time. In this case, wet cleaning is applied. Concave and convex areas are difficult to clean.
• Extruded- the laminated film is moisture resistant.

• clean regularly, avoid heavy pollution;
• remove the spots that appear immediately;
• it is forbidden to use abrasive materials and washing powder;
• pre-clean the grooves and the entire coating with a vacuum cleaner with a soft fluffy brush attachment;
• remove the remaining traces with a dry sponge with light scrubbing movements;
• choose in advance what to wash the ceiling tiles with: gels or concentrates for dishes, washing, hair shampoo;
• take a napkin for wet cleaning from a non-shedding lint-free material;
• squeeze the fabric well after wetting it in the working solution;
• use substances with bleach only for white coatings;
• remove excess moisture from relief structures with paper towels;
• do not use chemical solvents - you can be left without a ceiling;
• use protective equipment: gloves, glasses, scarf;
• hide food and dishes while cleaning.

How to wash grease and soot from ceiling tiles in the kitchen

During the cooking process, polystyrene foam is exposed to fumes. As a result, a greasy coating with soot particles appears on it. The hostess has a problem: how to clean and not damage the foam ceiling tiles in the kitchen.

The chemical industry does not produce special products for removing traces of grease and soot from foam ceilings.

Easy to prepare for anti-pollution homemade solutions at home from substances available on the market or at hand. Folk remedies are efficient and cheaper.

The surface is pre-cleaned with a vacuum cleaner and a dry sponge.

Required substances	Mode of application
sodium orthophosphate: 1 tbsp. l .; water: 3.5 liters.	Moisten a soft foam sponge and wring out. Treat the cleaning area. Repeat 2-4 times until grease and soot spots disappear. Do not rinse.
for washing - liquid dish detergent (Feri, Pemolux, Myth, Biolan): 1 tbsp. l. for 250 ml of water; for wiping - 1 tsp. vinegar in 250 ml of water.	Foam the substance in the basin. Apply foam. Leave on for 15-30 minutes. Re-clean if necessary. Wipe with a cloth soaked in diluted vinegar.
liquid detergent: 1 tbsp. l. for 250 ml of water; bleach (for white tiles): 1 tbsp. l., water - 4 liters.	Cover the area with foam detergent. Treat the remaining yellowness with bleach. Wipe clean with a damp cloth.
laundry soap: 2 tbsp. l. shavings; 500 ml of warm water; for wiping - vinegar: 1 tsp. for 250 ml of water.	Dissolve the soap. Moisten the sponge and squeeze out the remaining liquid. Wash the entire cleaning area. After 10-15 minutes, wipe with diluted vinegar.
sponges impregnated with fat-dissolving chemicals; paper napkins.	Treat yellowed areas. Wipe the entire surface with a napkin.
wet wipes.	Clean up the contamination. Wipe with a dry cloth.
stationery eraser.	Rub the stain after preliminary cleaning.
oil primer.	Paint irreparable yellowness (especially for pressed products).

What to do with stubborn stains

Dirt with experience cannot be cleaned from the kitchen ceiling with gentle methods. There are more radical recipes for getting rid of them.

Required substances	Sequencing
ammonia (pharmacy. 10%), water, vinegar in a ratio of 1: 1: 1.	Apply with wet strokes on dirt. Leave on for 5-10 minutes. Wipe clean with absorbent cloth.
citric acid - 1 tsp; baking soda - 2 tbsp l .; water - 50 ml.	Prepare a thick mixture. Apply to the area to be cleaned. Leave on for 10-15 minutes. Wipe with a clean cloth. If yellowness persists, repeat.
table vinegar (9%).	Moisten a small sponge. Treat contamination.
concentrated bleach solution (for white tiles): 1 tbsp. l. for 20-40 ml of water	Apply to yellow or smoky areas. Leave on for 5-10 minutes. Remove with a damp cloth
medical alcohol.	Dampen a small gauze pad. Treat the problem area in a circular motion. Wipe with a napkin and dry.

After completing all the steps, excess moisture is removed with paper towels.

How to wash patterned ceiling tiles

A cover with a relief looks beautiful and elegant, but it takes more time and effort to return it to cleanliness.

Volumetric ornaments are washed according to the following algorithm:

• the entire area is covered with a vacuum cleaner with a soft nozzle;
• embossed patterns are additionally cleaned with a brush;
• the detergent is prepared more concentrated for the formation of persistent foam: 2 tbsp. l. for 100-200 ml of water;
• the projections and recesses of the ornament are filled with foam using a porous sponge;
• one of the recommended formulations is applied to stubborn dirt with a brush or a brush with a long bristle;
• water is sprayed with a spray to remove the cleaning agent;
• the remaining moisture is removed from the entire relief structure with soft paper towels.

Styrofoam Ceiling Tile Care

Keeping the polystyrene surface clean eliminates the need to wash off dirt for a long time.

1. The dust is removed 1-2 times a month with a vacuum cleaner with a furniture attachment. The operating mode is selected empirically. The initial intensity level is minimal.
2. A set of soft brushes and long-bristled brushes is used to thoroughly clean the embossed pattern.
3. A good solution to the issue is to take care of the expanded polystyrene using a Duster dust brush. Due to electrification, dust and small particles of dirt are well attracted to its villi.
4. Cleaning is completed by wiping the entire area slightly moistened with water with a hygroscopic cloth.
5. Single spots are removed quickly as they arise.
6. More serious impact is made when necessary.
7. It is advisable to expose the pressed (stamped) surface as rarely as possible to contact with moisture.

Conclusion

Regular maintenance of styrofoam will keep it clean. Contamination in the form of yellowness and soot can indeed be removed folk ways using homemade formulations. Old stains are removed by local exposure to concentrated substances.