Techniques for assembling role gates. How to make a roller shutter with your own hands? Roller shutter cons

Garage rolling gates can sometimes completely solve the issue of setting up a car. While they won't fit in many garages, they just have pretty low security. But at the same time, rolling garage doors are quite comfortable to use and can be successfully installed in the garages of private houses.

Today we will consider rolling garage doors, you will find out how they are right for you and what you will need to pay attention to when choosing. The issue of installation will also be considered. And on the video you can see some moments of installation.

Design Features and Benefits

Compared to other designs, rolling garage doors occupy a worthy place in the sales market, many consumers want to purchase them, because they are durable, practical and original.

So:

• In addition, such designs look very attractive and elegant, which means, in any case, they will decorate any room, including the garage. Often, many owners choose role-playing gates for the reason that they are distinguished by simple installation, which cannot be said about many other designs.
• But this option also has its drawbacks. For example, you cannot do good insulation and therefore the consumption of energy carriers will be large.

Attention: It should not be forgotten that there is a box for roller shutters in the upper part and this will significantly reduce the height of the entrance.

• But the price at the gate is quite attractive and it is lower than the sectional ones.
• The installation can also be attributed to the advantages, it is not complicated and does not require large expenses. Garage roller doors can be installed by hand.
• Ease of transportation is also a plus. The kit takes up little space. In this range and a large selection of design issues. Moreover, you can give the dimensions and they will make it exactly for your opening.

Where does this design fit?

Rolling garage doors are not suitable for every building, let's see where they will be optimal for installation.

So:

• Often an opening in the wall of a particular room does not allow the use of certain gates, so you have to think about buying roller shutter structures, in fact, this correct solution. After all, such gates will not only decorate the room, but will also serve for many years, this is important for every owner.
• This design is suitable for non-standard openings.
• It would also be appropriate to install them in places where the area in front of the gate does not allow for a swing structure.
• Also if the garage is not high and you do not have space at the top for laying sectional door panels.

Attention: When choosing, immediately consider the placement of the upper box where the roller shutters will be stored. The higher the garage, the larger the box will be. Before buying, the instructions for the selected model should be studied, and this item is definitely there.

How the system works

If we talk about the principle of operation of this type of gate, then it is similar to the principle of a roller shutter mechanism. In addition, their designs are similar, such gates are equipped with a shaft, a door leaf and vertical guides, these elements ensure the safety and reliability of the gate.

• Their opening and closing occurs both mechanically and automatic drive so you can definitely appreciate it.
• If you are interested in a mechanism of this design, then know that it is the same. When opening the gate, the leaf is wound on the shaft, which is located in the box, but as soon as the opposite action occurs, the shaft begins to unwind the leaf, as a result of which the opening in the wall is closed.
• As a rule, it is customary to install such structures either in garages or in non-residential premises, in addition, there are options for sale with thermal insulation, so you can choose them if you wish.
• In general, comparing with other designs, they are installed from special components, it will not work to assemble such gates on your own, which means that you may not even try to do this.
• If a professional begins to do the work, he will be able to assemble the gate without any problems, easily, quickly and efficiently, so decide for yourself what you should do.

Attention: When choosing this type of gate, special attention should be paid to the power of the lifting mechanism. Its value should be at least 15% higher than required, otherwise they will not last long.

Installation

It is not so difficult to install roller garage doors, but there is a sequence and features that must be followed. Let's take a closer look at the entire installation process and try not to miss anything.

How to prepare for installation

Before performing the installation of such a design, it is imperative to prepare the appropriate tools and materials, because otherwise nothing will work. In fact, those tools that are necessary for this work are household, which means that you can buy them at any store or ask your neighbors.

Attention: Do not forget about the high-quality preparation of the frame of the opening, because this is the only way to ensure the correct and high-quality installation of doors of this type at the lowest cost, be sure to consider this.

So:

• It must be remembered that the surface of the opening in all cases must remain perfectly flat, only in this way can the structure correctly adjoin the opening, and this is the most important condition.
• If the perimeter of the opening is not even, it will need to be plastered. Otherwise, there will be distortions along the perimeter and this will lead to jamming of the roller shutters in the grooves.
• If you are not sure that you can do it yourself preparatory work, then, of course, you need to seek help from specialists.
• Using the building level, it is imperative to check the deviation of the working surface from the vertical and horizontal.

Attention: You must check if you have all the components of this type of gate. This is a box with an electric drive, a canvas of lamellas, guides, a box with small components.

Assembly of the structure

As soon as the kit is checked, you need to proceed with the installation, first of all, you need to outline the holes on the rails, because this is the most important condition, do not forget that the centers of the holes should be located in the center of the rail grooves.

• In those places that you will be marked, you need to drill holes, the diameter of which will be 8 mm; it remains only to change the drill to a drill, the diameter of which will be 12-14 mm. To do this, we use a puncher and dowels.

Attention: Do not use dowels from kits - they will not give the desired rigidity. Plastic should be taken separately and self-tapping screws with a diameter a couple of mm larger than the plastic hole section should be taken to it.

• Now you can safely move on to the box, for this you need to remove the front cover of the box, unscrewing the screws, and pull the front cover towards you with your hands. On the back cover of the box, you will need to mark three holes on both sides, this is done in order to ensure reliable fastening to the wall in the future.
• The frame must be attached to the opening, pulling the power cords intended for the electric drive through the holes. The frame must be attached to the work surface, making sure that it is really reliable and of high quality adhering to it strictly vertically, so be sure to use the building level.
• Shims must be used for adjustment. A tree will do just fine. Overlapping must not be allowed.
• Using a screwdriver and self-tapping screws, you must fix the guides and the box to the frame of the opening, it remains to check the horizontalness of the electric drive, again, the building level is ideal for these cases.

• As soon as you begin to unpack the canvas, the crossbars will need to be inserted into the top profile of the canvas. The rings, in turn, must be brought to the stop, thereby fixing the position of the rings with self-tapping screws, do not forget that it is forbidden to drill the shaft, so do not make such a mistake.

• Now start screwing the self-tapping screw into the radial hole of the regen ring, this is done until it stops, be sure to remember this, also do not forget that you cannot drill the electric drive, because this is so important.
• It remains to connect the switch for the electric drive, but remember the safety precautions, in addition, you need to use a personal protection kit to avoid problems.
• To properly adjust the limit switches, you need to use either a plastic or metal hexagon, it is supplied.
• After the work is done, and you know for sure that you did everything right, you need to fix the screw heads with plugs, remember that this is done to increase the protective properties of the structure as a whole, which means that you should not neglect this important rule never.

At the very end, you need to remove the protective film from the canvas, if there are contaminated areas, then they must be effectively cleaned, you must understand this.

Conclusion

Now you know that there is nothing complicated in this kind installation work no, which means that if there is a desire, then the result will be able to satisfy, try to perform every action with high quality. Roller shutters garage doors should be properly maintained, lubricating the guides will extend their life.

There are many varieties garage doors, each of which has a lot of positive and negative points. We are already accustomed to traditional swing doors, which have a simple and robust design. However, in some cases their use is not entirely justified. More profitable to use alternative options. Today we will consider roller shutter doors to the garage, including economy class, their device, components, principle of operation, as well as do-it-yourself installation features.

Roller garage doors

What are rolling gates

Roller shutter gates are a sheet consisting of many profiled aluminum or steel elements called lamellas. Their thickness is usually 19-23 mm, and the width is 37-120 mm. Inside, the lamellas have voids, which are filled with polyurethane foam insulation at the factory. The slats are interconnected by means of a hook-lock, forming a flexible sash. All gaps between the lamellae are lined with insulators. An end piece is attached to the lower part of the leaf, which ensures a snug fit of the sash to the floor during the closing process.

In addition to the main leaf, rolling garage doors consist of the following structural elements:

• The shaft on which the fabric is wound.
• Mechanical lifting device.
• Box for placing the canvas.
• Mechanical control device.
• Motorized drive that raises and lowers the flexible sash. In some versions, the motor may be missing. Then the drive is controlled manually.
• Guides located on the sides of the gate. They are U-shaped aluminum profiles with a wall thickness of 2-3 mm.
• Rollers, brackets and fasteners.

Appearance on roller shutter drum

Advantages of roll barriers

• This is an economy option. Saves space in the garage.
• Roller shutters can be installed in garages where it is not possible to install other types of entrance systems. For example, in the basement or with a lack of space near the garage.
• Versatility. Can be used in openings of any size.
• Quick opening and closing of the flexible sash. When using an electric drive, you don’t even have to apply physical effort.
• Lifting economy gates can be mounted by hand, as they have a simple design. Of course, it is necessary to skillfully handle tools and understand the technique.
• The porous insulation inside the lamellas provides sufficient heat and sound insulation of the garage room.

Disadvantages of roller shutter structures

• High cost for large sizes canvases.
• Low resistance to vandalism.
• Impossibility to equip a gate for an entrance. Each time you have to raise the main canvas to enter the garage. If it is necessary to make a gate, then it is made separately from the roller shutter structure.

The principle of operation of rolling gates

The opening of the flexible sash occurs only at the command of the operator. You can control the sash using a button located inside the garage, or use a radio control unit for this purpose. During the opening process, the sash rises and is wound on a rotating shaft. So it is fixed by a special mechanism. Closing the sash occurs in the reverse order. Ordinary window shutters function in the same way. The movement of the sash is helped by rollers, due to which the smooth running of the canvas is ensured.

The sash is controlled manually or by means of an electric drive. In the latter case, the system is additionally equipped with an emergency lift, in case of a power outage. Also, roller doors must be equipped with an emergency brake in case of possible failures. A special gearbox must prevent the sash from falling quickly.

Roller shutter installation

Let's consider how to install rolling shutters on the garage with your own hands. In most cases, the guides and the box with the canvas are installed on the inside of the garage. This provides more high reliability designs. An external do-it-yourself installation method is chosen if the thickness of the box with the canvas does not allow it to be placed under the ceiling of the garage.

drum box

Roller shutters for garages can be installed overhead or built-in. The overhead method involves the imposition of the box on the wall. With the built-in method, the box is located below the upper garage slope.

The work is done in the following order:

1. The opening and the place under the ceiling are freed from all unnecessary things, such as electrical wiring, communications, etc. If there are any irregularities, they must be eliminated. Irregularities of not more than 5 mm per linear meter are allowed.
2. Preparing guides for installation. 2 walls are drilled with their own hands according to the marks for attaching the guides.
3. The box is being prepared. You need to remove the front cover from it, and then drill holes in the back cover for mounting the box on the wall, and for entering the electric cable.
4. The guides are mounted in the grooves of the side covers.
5. The box is connected by hand with the guides.
6. The finished frame is measured by applying it to the opening.
7. If the dimensions of the frame correspond to the size of the opening, then the frame is rigidly fixed in place.
8. The main canvas is fixed, after which it is leveled strictly according to the level.
9. Taking into account the position of the section in closed, do-it-yourself vertical guides are installed.
10. A drive is installed that will drive the roller shutter.
11. Wiring is done if the drive type is electric.
12. The operation and smoothness of the sash movement are checked. If there are jamming in some place, you can try to lubricate the rollers.

We examined what a roller garage door is. With proper installation, the work of this design will be established within a few hours after the start of installation. With careful handling, such a system can last for decades without causing any trouble to its owner. To ensure the safety of the garage, it is recommended to equip the roller structure with additional locks.

A rare car owner is not concerned about the fate of his vehicle. Therefore, when arranging a garage of any type, whether it is an attached room that is part of a residential building or a separate building, it is important to choose the right gate.

In addition to classic garage doors, there are many other convenient and functional varieties of garage doors on the market today. The optimal price-quality ratio is demonstrated by compact, durable and aesthetic garage roller shutter systems.

Steady interest in garage roll-up structures in the form of an overall powerful roller shutter is due to the ability to reliably protect your property from unauthorized entry, as well as to effectively organize doorways non-standard size, equipped with various engineering communications.

Thanks to the widest choice of colors, roller shutters fit perfectly into the exterior of suburban households, while maintaining a unified style with facade decoration, and emphasize the features of industrial design industrial premises. In our article, we will talk about their features, find out the pros and cons, and also analyze customer reviews of such devices.

Kinds

Roller shutters for the garage are classified according to several criteria.

Production material

For the production of garage doors, steel and aluminum profiles are used. The latter are either extruded or foam-filled roller-rolled. It is recommended to block the doorways in the garage with a profile with soft or hard foam filling in order to ensure the creation of an optimal temperature in the room. Storing a car in a favorable microclimate prolongs the life of parts and assemblies.

An extruded profile made of solid aluminum ingots with enhanced strength is a traditional material for the manufacture of street rolling gates, which are installed as a burglar protection. Aluminum structures have all the advantages of this metal - lightness, corrosion resistance, so they will last longer. metal structures, excellent decorative properties and undemanding care.

When the priority task in arranging a garage is to ensure its increased security or fill openings increased in height and width, then optimal solution there will be steel garage shutters. They perfectly cope with the functions of a formidable and reliable guardian of someone else's property, as they have increased resistance to mechanical damage due to excellent fracture strength characteristics.

Control system

Garage doors-roller shutters can be:

• Manual, which is carried out by a manual bolt - two sliding stops that work similarly to a bolt or lock bolt in the form of a lock with a key built into the last lamella of the structure.

It is advisable to install these mechanisms on gates up to 2.5 meters wide and weighing up to 30 kg, since manually lifting a wider and heavier structure can cause the leaf to warp and, as a result, break it.

• Electrically operated– the presence of an electric drive that independently locks the structure after closing significantly increases the convenience of using garage roller shutters. Most models have an electric drive with an emergency manual web lifting mechanism, designed to work in the absence of power supply. The electric drive is controlled by a key or key switch, an electronic code device of the "tablet" type, plastic card or remote control.

Security level

The degree of resistance to burglary of roller shutter structures, depending on which they can belong to one of the eight classes of burglary resistance, has been confirmed in practice, namely by a series of experiments conducted to determine the protective properties of the gate.

During the tests, hammers, perforators and electric drills are used, checking how serious damage can be caused to the canvas with these tools. They are used for hacking mounts or crowbars to establish how long full access to the inside of the room is possible.

Characteristics of burglary resistance classes:

• P1 - products belonging to this class are distinguished by the lowest resistance to mechanical damage, so there is no need to talk about any protection against hacking. They are sensitive to any physical impact and are easily deformed even without the use of any tools. They are good to use as a windscreen, so that dust will accumulate less in the room.
• P2/P3- models with higher strength properties. To crack such gates, you will already need a hammer or a mount, which, however, does not guarantee instant “success” at all. Designs labeled P2 will last for 5-6 minutes, while P3 products will take 10 minutes to get full access to the garage.

These rolling garage door solutions are worth considering for installation in country house subject to the presence of one of the tenants around the clock.

• P4/P5- this is the most suitable options for equipping garages located in protected areas. In this case, even the most prudent attackers, "armed" with a jack and a heavy percussion instrument, will have to sweat. P4 models will last approximately 15 minutes, and P5 designs - half an hour. During this time, the guard will have time to react and arrive at the place of hacking himself or with help.
• P6/P7/P8- such roller shutter systems should be chosen by those who are not used to being content with compromise solutions when it comes to protecting their property. Hacking structures P6 takes about 50 minutes, models P7 - 1 hour 20 minutes, and to overcome the protection of the gate P8, you will need to spend at least two hours. Equipping a warehouse or garage with these gates, combined with an alarm system, guarantees maximum protection of your property from any encroachment from the outside.

Installation method

When installing garage roller doors use:

• Overhead installation- this is the simplest option, involving the fastening of the protective box above the opening, and the canvas itself to the supporting side posts installed on the outer walls of the opening.
• Embedded installation, in which the structure is located in the opening itself. The advantage of this method is the absence of unnecessary details that overload the facade, and the minus is the reduction of the opening on each side by the width of the guide.
• Combined installation, requiring the arrangement of a separate niche for the box above the entrance.

Advantages and disadvantages

The secret of the popularity of rolling garage doors is explained by a lot of positive qualities:

• Convenient installation in rooms with low ceilings.
• Saving usable space, as the operation of the roller shutter is limited vertical plane as opposed to swing gates. This perfect solution for buildings with a small area of ​​​​entrance to the garage or the entrance from the sidewalks.
• Possibility of additional air exchange in the room by equipping the canvas with ventilation profiles, as well as partial visibility and multiplication of garage illumination thanks to viewing profiles, which have a transparent polycarbonate insert.

• Increased wind protection of the web due to the end grip.
• Simple and understandable manual control, which, if desired, can be easily automated by equipping it with various useful options.
• Long-term protection of property from any encroachment of ill-wishers. When installing gates of a high class of burglary resistance, this fact is taken into account by insurers, reducing the amount of the premium.
• Lower cost compared to sectional doors.
• A variety of color and texture solutions, which allows you to create all kinds of combinations of roller shutters and facades of buildings in order to maintain the overall color scheme exterior and maintain a unified design style.

Of the minuses of roller shutter systems for the garage, we can distinguish:

• High thermal conductivity, which excludes the possibility of their use as doors in a warm room.
• Freezing of the parts that set the slats in motion, ensuring the lifting of the canvas. Frosty weather or snowfall provokes the ingress of moisture between the slats of the leaf, and the subsequent formation of ice makes it difficult to lift the gate. There are three ways to solve the problem: equip the garage with a protective visor or heating mechanism, or use aerosols that prevent icing.
• Upgrade of garage roller shutters - installation of motion sensors, "sensitive edge" systems, switching to remote control control automatically increases the cost of the gate.

Construction device

Roller blinds are a kind of blinds and their design also includes the main parts and auxiliary elements.

Standard equipment of garage roller shutters is presented:

1. Lamellas (roller profiles) made of aluminum or steel, which are fixed to each other by means of swivel joints.
2. Two vertical guide rails.
3. Pick-up shaft for winding the web when lifting / lowering.
4. A protective box of a rectangular or semicircular shape for placing the web in a folded state.
5. Mechanical/electric drive.
6. Crossbar / automatic locks.
7. A lever responsible for unlocking the rotary motor for automated gate models in cases of a power outage.

If desired, in the roller shutters you can install:

• DU system.
• Anti-theft / fire alarm.
• Silicone/rubber seals.
• The system of automatic heating providing easy lifting of a cloth in the conditions of low temperatures.
• Motion sensitive photocells, etc.
• Movable carriage for heavy roller shutters.

Dimensions

The formation of the cost of rolling garage doors is influenced not only by the material of manufacture, the type of control system and the presence of additional functions, but also by the size of the leaf. It makes no sense to order a roller shutter without preliminary measurements of the opening in width and length.

They must be placed as accurately as possible in the doorway, which contributes to the smooth running of the slats when lifting and closing, respectively, eliminates premature wear of parts and increases the service life.

TO standard sizes roller shutter doors with a mechanical drive include:

• 1.5x1.5 m;
• 2.2x2.5 m;
• 2.5x2.5 m;
• 3x2.5 m.

Dimensions of models with automatic drive:

• 1.5x1.5 m;
• 2.2x2.5 m;
• 2.5x2.5 m;
• 3x2.5 m;
• 4x2.7 m;
• 4.3x2.7 m.

The height of the protective box is 20-36 cm. Rolling doors have a maximum width of 6 meters and can occupy a maximum area of ​​13.4 m2.

Manufacturers

The quality and durability of garage doors is the direct merit of the manufacturer, so his choice should not be left to chance, relying on luck. Needless to say that only companies with many years of experience and a high reliability rating among buyers should be trusted. Let's dwell on some of them.

Hormann

Garage doors from the largest European manufacturer from Germany demonstrate excellent performance thanks to double thermal insulation panels with an increased thickness of 42 mm and guides with anti-corrosion plastic base. Optimal coordination of the door with the drive ensures the stability of the entire structure. All products have a 10-year warranty.

Judging by the reviews, the only complaint of users to the gates of this brand concerns only their high cost, which most recognize as quite justified, given the highest quality and reliability of German roller shutter systems.

Alutech

The international brand, whose enterprises are located in Europe and neighboring countries, produces garage doors of all existing varieties and all automation for them. During the manufacturing process, rolling shutters are monitored by 50 parameters using modern methods product quality control.

It is quite possible to install rolling shutters correctly without any special knowledge. You can do it yourself.

When opening a rolling shutter, the aluminum profile sheet moves vertically upwards along the guides and is wound onto a shaft located in the box at the top of the opening, and when closing, the sheet, respectively, is easily unwound and falls down.

In order to install rolling shutters with your own hands, it is necessary, first of all, to understand some of the features of this type of structure.

Before proceeding with the instructions and direct installation on your own, you need to understand what is the difference between these gates compared to other popular types of structures for garages and non-residential premises. What is the difference in the requirements for the premises and why do we choose this particular form of automated fencing?

Often the main reason for choosing roller shutters is not a specific love for this type of structure or aesthetic preferences, but the impossibility of installing other types of structures, and even more so the reluctance to install a regular gate or constantly push standard sliding gates.

The main reasons for choosing roller shutter structures:

1. The opening in the wall of the room is not suitable for the installation of up-and-over or sectional garage doors, not to mention the installation of these structures with your own hands. For example, this opening does not allow you to place the main guides, there is simply not enough space. A similar problem is often found in old-style non-residential premises (warehouses, distribution points, garages, etc.). In this case, the only high-quality and reliable type that can be mounted is roller shutters. And it's easy to do it yourself.
2. For some reason, the room does not allow the installation of other structures.
3. You need the fastest possible gate. In this case, no other structures, except for high-speed roller doors, will be able to cope with the tasks.

Principle of operation and design profiles

For greater convenience of opening, sliding gates can be automated using electric drives and controlled by a button or remote control.

The principle of operation of these gates is similar to the principle of the roller shutter mechanism. Their designs are also similar, they have three main components: a shaft, a door leaf and vertical guides. The main difference is in the profiles of the canvases used.

The opening and closing of the structure is either mechanical or automatic. Thus, we clearly see an enlarged copy of roller shutters or roller shutters. The mechanism for this design is the same. When opening a rolling shutter, the lamella leaf is wound onto a shaft located in the box. In reverse action, the shaft unwinds the web, closing the opening in the wall.

Roll structures are designed for installation in garages and non-residential premises, sometimes they are equipped with thermal insulation (provided by the use of polyurethane foam filler).

Rolling gates, unlike other types of structures, are mounted only from specially designed components. It will not be possible to assemble them with your own hands from improvised materials, such as sectional or lift-and-slide gates. But this has a huge plus: on the basis of a professional assembly kit, the structure is assembled quickly and without complications. A very important installation point is the quality of preparation and future work. The better the installation is, the longer the gate will last.

Preparing for installation

Tools you will need:

1. Building level.
2. Roulette.
3. Marker.
4. Wire cutters.
5. Long screwdriver.
6. Construction knife.
7. Hammer.
8. A set of keys.
9. Riveting pistol.
10. Screwdriver.
11. Drill with perforator.
12. Personal protection kit: gloves, goggles, helmet.

All this tool is household, you can buy it in any store or borrow it from friends.

High-quality preparation of the frame of the opening will provide you with the installation of rolling shutters at the lowest cost. The surface of the opening must be perfectly flat for maximum adhesion to the opening. First, you must independently check the quality of the preparation of the framing of the opening. Using the building level, check the deviation of the working surface from the vertical and horizontal. It should not exceed 1.5 mm/m.

Then check if you have all the components of the gate kit. You must have:

1. Electric box.
2. Cloth of lamellas (complete).
3. Two guides.
4. Box with small accessories.

After checking the kit, let's move on to preparing the guides for installation. To do this, outline the holes on the guides. The centers of the holes must be centered with respect to the rail grooves. Then, in the marked places, you need to drill holes with a diameter of 8 mm through both walls. Then change this drill to a drill with a diameter of 12-14 mm. Drill wider holes for the plugs in the same places. This should only be done on the front side of the rails.

Then we move on to the box. Remove the front cover of the box, to do this, unscrew the screws from the box and pull the front cover towards you with your hands. On the back cover of the box on both sides, mark 3 holes for further fastening to the wall. Drill these holes. Also mark and drill an additional 2 holes in the back cover of the box with a diameter of 12 mm for the output of the motor cable. Then install the grooves of the guides into the grooves of the side covers of the box. And, finally, assemble the roller shutter frame with your hands: connect it using grooves, a box and guides.

Assembly of the structure

Attach the frame to the opening, pull the power cords for the electric drive through the holes with your own hands (do not forget about gloves). Attach the frame to the work surface and make sure that it is adjacent to it strictly vertically, use the building level for this. Using a screwdriver and self-tapping screws, fix the guides and the box to the frame of the opening. Then check the levelness of the electric drive with a spirit level.

Unpack the canvas, insert the crossbars into the upper profile of the canvas. Install the axes of the crossbars in the mounting holes of the crossbar rings of the box. Bring the rings to the stop, fix the position of the rings with self-tapping screws. Shaft drilling is prohibited. The self-tapping screw must be screwed into the radial hole of the crossbar ring until it stops against the shaft wall. Do not drill the actuator. Then connect the switch for the electric drive, do not forget about safety precautions and a set of personal protection.

To adjust the actuator limit switches, a plastic or metal hexagon is used, which is supplied in the kit. It is necessary to determine the maximum lower and maximum upper position of the canvas. The lower position is set using the lower limit switch, the upper position is set using the upper limit switch. Both switches are located on the side of the box. It is necessary to adjust the upper position of the canvas with your own hands so that one lamella remains in the opening of the guides. Carry out electrical connections (better to contact a specialist). Then install the front cover of the box and secure it with rivets or self-tapping screws.

After the installation is completed, in order to increase the protective properties of the structure, the heads of the screws and screws in the guides and the box must be closed with plugs. After completion of the installation and finishing works You can remove the protective film from the canvas and clean the dirty areas.

As we can see, there is nothing complicated in this type of installation work.

The main thing is to thoroughly approach the matter: prepare the room, tools, kit, remember the safety rules and install the structure in a quality manner, following the instructions.

- a modern solution that has already deservedly achieved popularity among car owners. They are designed for small buildings, which means they are ideal for arranging a garage space. roller shutters it is impossible to make it yourself for a garage, production is carried out only in the factory.

But installation can be done on your own, without involving hired specialists in the task.

If you opt for this option, then the reliability and degree of protection from intruders will increase dramatically.

The main elements of the gate are metal slats. The design is hollow, so insulation is added to the voids. The most common material is polyurethane foam.

As a rule, the lamellas are made of aluminum so that the weight is not too large. As a result, the design is strong, resistant to burglary and durable due to the metal base.

But one should not place excessive hopes on protective properties, since if desired, criminals will still be able to break through the canvas with a strong blow. Additional security can be provided by using locks with a secret and some other solutions.

Metal panels are treated with a polymer-based protective coating that prevents scratches and chips. Used at the gate structural solutions, which prevent pinching hands and fingers, so they are absolutely safe. Insulation also provides decent thermal insulation.

According to the type of production, two types of products are distinguished - extruded and rolled. technological process. extruded products are highly resistant to sunbeams, precipitation and other environmental influences. Rental models are characterized by increased durability, this can be achieved thanks to a special two-layer coating.

In addition to the above advantages (durability, strength), rolling garage doors are good absorb noise. The most important plus, of course, is the operation process. Automatic systems allow, without leaving the car, to open the entrance to the garage.

For this, a special remote controller, which sets the lamellas in motion. If the electricity was suddenly cut off, then you can use manual mechanism.

Models in this category are especially suitable for garages where up-and-over doors or sectional doors cannot be installed. A typical reason might be opening size. In addition, only roller shutter models provide the highest speed gate opening. This is due to the high degree of automation and their design.

Electric garage doors:

Installation

How to install a gate roller shutters to the garage? Before starting installation work, do froze premises. For this you need to execute drawing walls with all adjoining surfaces. To make the measurement accurate, use measuring devices - level, tape measure. The height of the opening must be measured in several places.

The opening can be visually even, but actually skewed. If skew was detected, then more important size is maximum height. Then you should find out the height of the lintel. This is understood as the space between the lintel and the ceiling. The optimum height is 20-22 centimeters.

REFERENCE: The drawing can be transferred to a computer, so you can draw lines more accurately and mark the dimensions. In addition, you will always have the opportunity to make as many copies of the drawing as you like.

With measurement, you can go to the store for parts and a metal profile. If dimensions roller shutter for the garage non-standard, you can ask individual order. Some providers provide similar services. For the most part, garage blinds are supplied to the market by European manufacturers.

The largest and most famous on the market are the Dutch company "Flexi Force" and a German company Hormann. In Russia, the company is engaged in manufacturing doorhan. All of them guarantee high quality and excellent product characteristics.

In addition to the cover sheet, you will need a protective box, guide rails, a shaft, as well as a control mechanism. Of the tools will be indispensable measuring instruments, knife, hammer, drill, pliers.

After taking measurements and acquiring all the elements of the gate and the tool, you can proceed to preparatory stage. The place of work is freed from any kind interior decoration that will interfere. Approximately 50-60 centimeters of space around the opening should be spared from interior elements.

Then begin to install guides. The edges of the metal profile will be inserted into them. Guide rails are mounted along side opening.

After that comes the turn of one of the most important elements - shaft. The metal sheet is driven by a shaft. The part is mounted together with a protective box, the shaft is placed inside it. In addition to the shaft, a chain drive and a set of gears must be placed inside, otherwise the gate will not open.

Shaft handle anti-corrosion coating. Metallic profile will be mounted to the box with the mechanism. The box can be located outside and inside the garage, but the second option is preferable. The internal arrangement will increase security. The box is closed with screws and rivets.

A roll of canvas is fixed on supports which are usually included in the package. Brackets are used for the lower elements, they are customized to fit the dimensions and dimensions.

The last step is to install drive. The drive starts the system. It can be of two types:

• manual;
• electric.

The electromotor drive allows to make completely automated gates.

IMPORTANT: If you have chosen an automated gate, then think about a reliable waterproofing.

In case of mechanical drive you will have to use your own strength to open the entrance to the garage. In addition, to create an automatic system, you will need a receiver and a remote control, they can be purchased in one set. The receiver is connected to the garage electrical network and the electric drive. That's all. As you can see, do-it-yourself installation rolling gates It's not hard at all in the garage.

Conclusion

role gate for the garage are a modern solution. They are especially recommended for garages, which for one reason or another are not suitable for other types of doors. The main reason for this is entrance dimensions. The main advantage of a garage door roll is the process of operation and speed. They can be equipped automatic system and open the entrance without getting out of the car.

Most models are produced by European companies. The largest and most famous - the Dutch company "Flexi Force" and a German company Hormann. In Russia, the company is engaged in production doorhan. Roller shutter garage doors are quite durable as they are made of metal. But to increase protection, it is best to install additional locks with a secret.

Useful video

Watch the video on how to install roller shutter gate to the garage with your own hands: