A dark stain on a metal door. How to clean the door? Creativity is a real way out

One of the most common problems after renovation is polyurethane foam that has dried on the door. It is rather difficult to clean it, as the substance quickly adheres to the surface. What and how to remove polyurethane foamwithout damaging the door?

Design features

Methods for cleaning the door from "mounting" and traces of whitewash depend on the material from which the structure is made. Doors can be:

• wooden,
• made of MDF,
• plastic,
• metal,
• glass.

Most often wood or MDF are used as materials for the door. There are no particular difficulties in cleaning wooden products. But MDF structures can have different types of coatings: paint, film, veneer, laminate, etc. Doors with a veneered surface require special care.

Some coatings, such as varnished and painted, can deteriorate due to the use of a solvent, so you need to be careful when resorting to chemicals.

Polyurethane foam cleaning methods

The polyurethane foam dries quickly, so the earlier work starts, the more chances you have to clean the door without leaving a defect on it. In order to wash off fresh polyurethane foam, a special remover or solvent is used.

It is much more difficult to clean up dried foam marks. This can be done as follows:

1. Cut off any remaining foam as close to the door cover as possible.
2. Cover it with solvent, special wash, or vinegar. When the foam is soaked, try scrubbing the dirt off using a scraper or hard sponge.
3. For greater effect, use a scraper that is harder than foam but softer than the door surface. Clean up any traces of foam until you get rid of them completely.

How to clean up traces of whitewash

Another urgent problem after repair is cleaning whitewash stains, as a result of which cloudy stains appear on surfaces. If the door is glass, you can wash off the drops of whitewash with a regular glass spray. In order to remove contamination from metal or wooden structure, you need to "arm yourself" with a soft cloth and a bucket of warm water. This process is slow, but effective - the stains are completely wiped off the coating.

How to clean greasy stains

The process of installing new doors is not complete without the use of technical oil for lubrication door hinges... After that, greasy spots may appear on the surface. The most effective "tool" for dealing with such contamination is starch. Both dry starch and regular raw potatoes will work. Cut the vegetable into 2 pieces and rub the greasy spot with the cut side so that the potato juice is absorbed.

Another alternative way to clean up greasy marks on the door is baby powder, which contains talcum powder.

Ordinary soap solution can be used. But be careful with MDF coatings, which can deteriorate from excessive moisture.

Acetic acid is also a good aid in the fight against greasy stains. The greatest effect can be achieved if you apply a composition of clay and vinegar to the dirt. After that, all that remains is to clean the mixture with a slightly damp cloth.

How to clean the paint

The most effective and popular paint stain remover is solvent. However, you should not use it to clean dirt from MDF - it is better to apply alcohol to the surface, and then carefully remove the remaining paint with a blade. Even more difficulties arise when cleaning stains from frosted glass.

If it is sandblasting, then a common solvent can be used. To clean the glossy surface from dirt, use a special scraper. Least of all problems arise with removing traces water-based paintwhich is easy to wash off with plain water.

How to wash a primer

Many difficulties arise when washing the primer with door leaf, since this composition dries quickly and immediately eats into the coating. The methods for removing primer stains are as follows:

• a cloth dampened with water (for fresh dirt),
• vinegar solution
• soda,
• detergent for glass or tiles,
• ammonia.

In order to soften dried stains, polyurethane foam or fresh primer are also used.

Methods for cleaning plaster

Deal with plaster stains on MDF surface pretty simple. All you need is a rag, water and a scraper. Avoid getting water on the door to prevent deformation of the cover.

When the putty has softened, start washing off the dirt with the hard part of the sponge, if it does not come out, use a blade and a scraper. You can also use fine sandpaper for this purpose.

Difficulties arise when washing out stains of putty, which contains polymers. It adheres well to the surface and in this case it is indispensable without mechanical action. Polyurethane foam is also used to soften stains.

How to clean matte or glossy glass

During the renovation process, construction waste can get onto the glass elements. How and how to remove dirt from matte or glossy glass on the door?

The glossy glass surface can be cleaned with a conventional glass cleaner. For this purpose, what is always at hand in the house is suitable - citric acid, vinegar, alcohol solution.

To clean frosted glass, in addition to the usual glass cleaner, you can use a special care composition that gently removes stains without damaging the glass structure.

Regardless of the material from which the door is made, try not to use strong chemical substances and abrasives.

How to clean doors from greasy stains?

Generally, this process is not that complicated. The fix is \u200b\u200bsimple enough. To remove greasy stains from the surface of any door leaf, you will need:

• acetone;
• potato tuber;
• table vinegar;
• clay;
• alcohol;
• ammonia;
• baking soda;
• water;
• napkins and sponges;
• some free time.

First, determine which category the dirty door belongs to. The assortment offered today is wide, but the following types are considered the most popular:

• metal;
• wooden;
• laminated;
• glass.

Metal door

A type of door from which grease stains are especially easy to remove. Acetone, familiar to everyone and sold in building materials stores, will quickly eliminate the problem. Alternative option - White Spirit. It is no less effective and additionally good in that it is practically odorless.

Wooden door

In the case of a polished wooden door, raw potatoes will help restore it to its original state. So,

• divide the fruit in half;
• rub oily prints well with one of the parts;
• wait a while and remove any remaining marks with a wet cloth.

Instead of potatoes, you can use pharmacy talc, which has proven itself in the fight against such contamination. Verify its effectiveness as follows:

• sprinkle the powder on a damp sponge;
• rub the desired areas;
• then go over them with a clean and dry napkin.

Painted and unpainted wooden door leaves are cleaned differently. In the first case, proceed as follows:

• soak a cotton pad or napkin generously with vinegar;
• clean greasy stains on doors until all moisture is absorbed;
• achieve complete dryness with a clean cloth.

Important! If oily traces have appeared on the surface relatively recently, replace the essence with heated water with the addition of soap.

A combination of ordinary clay and vinegar will save an unpainted canvas from shiny marks. For this:

By the way, did you know that many housewives use different surfaces in everyday life? Try it!

Such specimens are covered from above with a special, especially durable film. And when washing greasy stains, it will only benefit you. The instruction is simple:

• dilute alcohol with water in a 1: 9 ratio;
• lean the napkin soaked in the solution for a maximum of 5 minutes against the soiled part;
• wipe dry.

Caring for laminated doors completely excludes the use of abrasive and chemically active cleaning agents such as acids and alkalis.

Laminated door

The things that are taken care of last longest. Do not be lazy to rid your doors and doors of dust, observe hand hygiene and, in order to avoid unpleasant situations, enjoy food only in the places designated for this. And if greasy spots appear on the doors, do not put off cleaning on the back burner and follow the advice given.

We hope that our advice will help you and you will become a regular reader of the site "Clean.ru", and we will share with you as much as possible useful ways cleaning dirt and stains.

General cleaning activities affect all aspects of life. We remove dust from all surfaces, wipe floors and wipe windows and household appliances. Among the standard procedures, the equally important, but less frequently produced processes are so easily lost.

Today we will talk about doors, or rather what means to wash them and how to do it. We will answer the most popular questions in the field of high-quality care for door leaf, glass and fittings.

Doors are an integral part of our home

Highlights

Interior doors, no less than other objects in the apartment, accumulate dirt and dust. This is especially noticeable if the door leaf is not monolithic, but has various carved parts, glass. Traces of dirty hands immediately appear on light doors, and the fittings are covered with a sticky layer of dirt mixed with dust.

Eco-veneer is especially vulnerable to dirt, because, by and large, it is just a textured film with which the canvas is glued. Film for eco-veneer is produced in different countriesenough quality material obtained by Koreans, Japanese, Italians.

In order for the door to please us with its cleanliness and it was pleasant to touch it, we will have to take care of it during operation. In addition, now deaf canvases are not so popular, because the door is most often an integral attribute of the overall picture of the interior of the room, therefore it should be colorful and beautiful, which means clean.

Doors support the interior of the room

Let's highlight the main points in door care:

• It is necessary to devote time not only to washing the door leaf itself, but also to cleaning and adjusting the fittings. If it is loose, you need to tighten it, if it squeaks, lubricate it.
• If you have doors installed at home natural wood, array, it is worth adjusting the indoor climate. It is undesirable to allow the temperature to rise above 25 ° C, and the humidity above 70%.
• Severe damage to quality doors you cannot hide, there is no way to hide any scratches or dents, so try to be careful with the material.
• If dirty or stained, try to wash your interior doors immediately, it is better not to wait for the dirt to absorb into the structure of the material.
• Old doors are not of the best quality, or a modern eco-veneer can be additionally protected from contamination by varnishing. Not the smartest way out, but affordable for everyone.
• When renovating, cover the doors with plastic, like other pieces of furniture, so as not to get dirty.

Doors are made from different materials: pvc, laminated, eco-veneer, natural veneer, solid wood. For each material in ideal its detergent composition, or just pure water. To wash and clean your canvases efficiently, you can use the following tips:

Pay attention to the door hardware when cleaning

• Many modern doors are equipped with glass, in order to wash them without smudges and streaks, add a couple of drops of ammonia to the water, provided that they are not matte.
• Metal parts on doors can be washed well with ordinary soapy water.
• To avoid damaging the door covering, it is best to wash and wipe the surface with a soft cloth such as chamois or microfiber.
• Dust will certainly accumulate on decorative inserts and carved door elements, so do not forget to remove it during weekly house cleaning.
• When finishing washing the door leaf, pay attention to the fittings, wash and disinfect the handles.

Most often, the door breaks down or loses its aesthetically pleasing appearance through our fault, due to poor handling and lack of proper care. But we want the door to serve us faithfully for a long time, so we choose suitable remedy and we will wash it.

Detergents

Means for cleaning doors are selected taking into account the material from which it is made, the degree of pollution and the presence of decorative elements on the surface of the canvas.

The universal ones are very popular. detergentssold as a spray. They are very convenient to use, they do not have pronounced chemical odors and help to clean surfaces of different quality from stains and other contaminants: glass, wood, pvc, eco-veneer. You can purchase a specific type of detergent door cover, in the same stores that they bought their doors.

White and light doors require more care

Wooden doors require more attention to themselves than veneer or eco-veneer (3D film). They do not like a huge amount of moisture, so when doing wet cleaning, make sure that the rag is slightly damp. Wooden doors can be rinsed with plain water without using detergents, but in most cases dry cleaning will suffice. To protect the canvas from dirt, use a polish.

Among the folk detergents with which our compatriots are trying to wash doors, the following compositions can be distinguished:

• Dishwashing liquid does an excellent job of removing dirt from veneer surfaces. Eco-veneer can also be wiped with a similar surfactant composition.
• Greasy stains can be removed with potatoes by cutting a fresh potato in half and rubbing the stain on it. After removal, rinse the cleaned area with plain water and wipe dry with a cloth.
• For doors made of solid wood and natural veneer, not particularly fond of wet cleaning, housewives found good way removing greasy and dirty stains. Talc is poured onto the dirt, it absorbs dirt, and then wiped off with a dry cloth.
• You can add apple cider vinegar to the clean water used to make the veneer door shine. Approximate proportion: 1 tablespoon per liter of water. Some types of eco-veneer can also be processed with this composition.

Remember to remove the detergent from the door with clean water after washing, and then wipe the cloth dry. Do not use abrasive cleaning tools and compounds: brushes with iron bristles, scouring pads, detergent powders, with such a tool, you will definitely ruin the decorative surface.

Working with glass

If frosted or ordinary glass is inserted into the door, it is worth starting to wash the door with it, and only then go directly to the canvas. Smooth glasses are washed with ordinary soft rags with a minimum amount of lint, frosted glass it is permissible to rub with a brush with soft bristles.

Frosted glass is produced by sandblasting. With the help of sand, the top layer is knocked off a smooth surface, from which the glass acquires a cloudy appearance with a frosty effect. Frosted glass allows you to hide what is happening behind the door from a distance of 30-40 centimeters.

Frosted glass can be perfectly cleaned from greasy stains and fingerprints using dishwashing liquid or starch solution. To prepare the solution, starch is added to warm water, 3-4 teaspoons per 1 liter.

If desired, you can install all glass doors in the house

Complex, stubborn dirt is removed with alcohol, acetone, nail polish remover based on it. Frosted glass does not lose its decorative qualities. However, during handling, make sure that drops of solvents do not fall on the rubber elements of the box seal or the silicone filler next to the glass.

Solvents, gasoline, ammonia no need to process frosted glass. Also, you do not need to scrape them with sharp objects, for example, to chip off traces of silicone.

If there are some defects on the door, they can be masked with polish. If cracks and scratches are more severe, then they will help to hide them. Match your door with a suitable shade, and rub a pencil into the surface of the canvas, let the wax fill in its flaws.

While maintaining proper cleanliness in the apartment, you will have to take care of your doors one way or another. Make them always look clean and tidy, because there is nothing difficult about this.

Professionals advise how to clean wooden doors yourself, and what tools are best for this. Modern doors are often embossed, they are decorated with decorative slats and mosaic patterns.

Door handles take on an untidy look in a short time after cleaning and also need separate detergents. Therefore, it is better to learn the rules for cleaning doors from various materials.

Basic rules for door care

In order for the doors to serve as long as possible, the owners should:

• take into account that the tree does not like humidity over 65% and temperatures over 24 degrees;
• takes good care of the doors to prevent damage;
• various stains are removed from the doors immediately;
• if the door leaf is not of high quality, it should be varnished in two layers - then there will be no problem how to clean the MDF doors.
• for a while renovation works, the doors are covered with polyethylene.

Choice of detergents for doors

The following are used for door washing:

• neutral detergents;
• windows in the doors are wiped with water with ammonia and wiped dry;
• metal inserts are washed with soapy water;
• door handles disinfect.

Common cleaners include Mister Muscle and spray spray. They wipe the doors and remove greasy stains from the glass.

Clearing doors

The wood should not be wiped with a wet cloth, so wring it out before washing. To remove stains on the door, apply:

• dishwashing liquid is used for the door leaf;
• fatty spots are eliminated by rubbing them with a cut of potatoes;
• with a mixture of clay and vinegar in the same proportion, cover the spots, stand for 30 minutes and wash off with water;
• to add shine to glossy glass, add apple vinegar;
• first the glass is washed, and then the door;
• smooth glasses are washed with a soft cloth, embossed ones - with a brush, and for frosted glasses, starch is added to the water.

The problem of how to clean white doors is especially problematic, because dirt is more noticeable on them. The main thing is to apply a detergent to soften the dirt, and after a while, wash off the dirt with water and wipe the doors dry.

Elimination of surface defects

When damage to the door could not be avoided, they are removed with a wax pencil that matches the color of the door. If the damage is deeper, you need to use a putty on wood, then paint or varnish the doors.

All formulations are washed off with clean water, after which the doors are wiped dry. When washing, do not use metal sponges and abrasives, so as not to damage the surface of the doors.

Very often on mDF doorsgreasy stains appear especially in the kitchen. Removing traces of grease from wooden doors is problematic, because MDF and wood are materials with microscopic pores, into which grease penetrates very deeply. But still, there are several ways how you can wash the canvas.

Operating procedure

Even touching the door with seemingly clean hands can leave dirt over time. Therefore, interior doors, especially to the kitchen, should be washed at least once a month.

Greasy traces must be removed immediately, since dust adheres to the fat, the stain becomes larger, the doors begin to deteriorate.

Surface preparation

First you need to get rid of dirt and dust spots. This will greatly facilitate the removal of oily marks. As a rule, in this case, it is enough to simply wash the canvas with warm soapy water and a rag. But when washing the canvas, the water should be removed immediately so that the door does not deteriorate. After washing, the doors are dried with a cloth and wiped dry.

When the surface is ready to remove greasy marks, choose a cleaning agent and start working.

The cleaning solution cannot be kept for more than 5 minutes. Any product used with prolonged exposure can ruin MDF - leaving light spots or other unattractive marks on it.

Many housewives, after washing MDF doors, dry them with a hairdryer. This is much safer than wiping the canvas dry with a cloth.

When caring for MDF doors, do not use abrasive cleaners and chlorine-containing products. Even washing powder can ruin the canvas. Also, do not use metal scrapers or abrasive sponges, which will inevitably leave scratches on the surface.

Improvised tools and household chemicals

There is no need to run to the store and buy expensive detergents. Sometimes unexpected products will help clear oily stains from doors. For example, potatoes.

Raw potatoes should be cut in half and the side of the cut should be rubbed over the dirt. The juice should dry completely. After that, the canvas is wiped with a dry napkin - all stains will go away. This method is ideal if the greasy marks are already very old. If, after cleaning, ugly stains remain, then they get rid of them by sprinkling with talcum powder. A little powder is applied to a napkin and wiped off the treated area.

The dishwasher contains active ingredients specifically for washing grease. She will also help wash the MDF canvas. A spoonful of gel dissolves in a liter of warm water and the soiled area is wiped with a rag. After removing the grease, wipe the doors with a polish so that no streaks remain.

If the doors are not painted, then it is worth trying to clean them of grease. homemade pasta... To do this, white cosmetic clay is mixed in half with vinegar, and the dirt is rubbed with gruel. When the paste dries, rinse it off with warm water. For these purposes, it is best to use white cosmetic clay, which is sold in every pharmacy and costs a penny.

Laminated doors are more difficult to clean. Stronger substances will help here. Can be used:

• Pure table vinegar
• Pure ammonia
• Acetone or acetone nail polish remover

Soak a cotton swab with the selected liquid, and then gently wipe off the dirt with it. If there is a drawing on the doors, then first the selected tool must be tested from the bottom of the canvas so as not to spoil the decor. You can also use solvents for these purposes, but they must be tested before starting work.

A great way to quickly remove grease stains from doors is with simple baking soda. It is very simple to use the product: 3 tbsp is diluted in 200 ml of warm water. l. soda. In the working solution, a clean kitchen sponge is moistened and the stained area is well wiped with it. The remains of soda are removed with a wet rag.

A reliable way to quickly remove traces of fat from MDF is citric acid. To do this, you need to dilute 2 tbsp. l. acid in 200 ml of water, soak a cotton pad in the solution and gently wipe off the greasy stain.

Sometimes it is necessary to clean the veneered wooden doors. Veneer is a thin section of wood covered with MDF. The price of such a door is not high, but it looks just fine. To clean the veneer, do not use aggressive chemicals. In this case, a mild wax polish is used.

You can also remove greasy stains without a trace from MDF canvas with the help of medical alcohol or even vodka. A napkin is moistened in the substance and dirt is wiped with it. After cleaning, the treated area should be rinsed with clean water and dried.

If only a window cleaner is at hand, then you can also clean the MDF. A little of the product is sprayed directly onto the stain, and then immediately the grease is wiped off with a cloth. If it is not possible to wash off the greasy dirt the first time, then the procedure must be repeated again. In conclusion, the doors are wiped with polish.

Ordinary vegetable oil also great for removing greasy stains and cleaning doors. A cotton pad is soaked in the oil, and then vigorously rubbed with it. You need to rub until foam appears. Then the treated area is wiped with a dry cloth. The next step is cleaning with a vinegar solution. To prepare it, you need to dilute table vinegar 1: 1 with water. Those places on the doors that have been cleaned are additionally wiped with vinegar solution. It remains only to wipe the canvas with a dry cloth, and the door will become as good as new.

Sometimes a simple school eraser can help fight grease stains on doors. It is used as usual - the stain is wiped off. But first, it is recommended to carry out the procedure on an inconspicuous area of \u200b\u200bthe door in order to understand whether the eraser will damage the canvas.