What can be done from an old refrigerator. Disposal of household appliances what to do with the old refrigerator, freezer. Sofa from an old refrigerator

Ideas for reuse old household appliances

Everything breaks sometime. Washing machines and refrigerators are no exception. If your equipment has already definitely fallen into complete disrepair and cannot be repaired, do not rush to throw it in a landfill. There are many options for using old washing machines and refrigerators, both quite practical and decorative.

Flower pot from the drum of an old washing machine. It is quite nice and roomy, it is not afraid of moisture, it will last a long time, because metal is a very reliable material. You can paint such a flowerpot for plants in any color.

The whole washing machine became a flower bed, even a container for powder and rinse aid was used. Of course, such a piece of household appliances looks strange surrounded by greenery, but in general it is very interesting option, original element of landscape design.

The most popular way to use an old drum from a washing machine is a brazier. You can cook on wood and coals not only kebabs, both a pot and a frying pan will conveniently stand on top. At the same time, making such a brazier is very simple.

This is already an improved version of the barbecue from the washing drum, on a tripod. By the way, the design is quite light, it is easy to carry around the site. As an option, it was possible to equip a stationary place for an outdoor hearth by arranging a convenient platform around the drum.

And who will say that it is ugly - reflections of the flame in the holes of shiny metal. Such a brazier does not look at all like an old and useless thing, but a relevant and practical element of a personal plot.

From a very old washing machine, or rather, its rounded metal case, you can make a smokehouse for fish and meat products.

This is how the drum of a washing machine, which the designer or the owner of the house with a rich imagination has worked on, can look elegant. By the way, in the empty case of such a pedestal-seat with a soft pillow, it is quite possible to store all kinds of little things.

And again the whole flower bed washing machine. Beautiful bright petunias smoothed out the brutality of the plain metal body of the equipment, which obviously served for many years until it turned into a flower bed.

Wardrobe in an old refrigerator. The case was painted, there are few shelves, but they are quite roomy, and various little things fit in the former freezer.

Even if the refrigerator itself refused to freeze, this cannot prevent you from using it to cool drinks during an outdoor party. simple finish wooden planks looks quite attractive, and the ice under the now hinged lid will remain for a long time.

An incubator in an old refrigerator case. It will retain heat, especially if it is additionally insulated, you only need lamps for heating eggs and a thermometer to control the temperature. A good option for those who want to start breeding chickens.

House for puppies. It turned out a separate bed and dining room. For a larger dog as bed the case of the refrigerator would also fit, you just need to remove the shelves.

How to deal with a broken refrigerator or freezer? Old household appliances, due to their size, are difficult to store at home, but they cannot be thrown into the trash, as they contain chemicals that are quite harmful to the environment. If the refrigerator is simply thrown into a landfill, then you can get a pretty decent fine for it.

In the new millennium, the "era of retooling" has come. According to experts, residents of the capital during the year change about 100 thousand washing machines, 300 thousand televisions and about 160 thousand refrigerators. Where to put all this equipment? And there is only one answer - to dispose of.

Today, there are many companies involved in the disposal of old household appliances. Recycling is a fairly profitable business, because almost all elements of refrigerators and televisions are recyclable. The design of these units includes plastic, ferrous and non-ferrous metals, glass, etc. A certain processing technology is applied to each type of material, after which they can be reused.

The most important stage of recycling is the extraction and neutralization of hazardous chemical substances present in the design of refrigerators and other appliances. Process recycling allows to preserve the natural resources of the country as much as possible. All refined metal goes to the State Fund, which provides for the production, socio-cultural and financial needs of the population. Therefore, the organized disposal of old household equipment has a direct impact on the well-being of citizens. This is their decent pension, and free education, and good roads.

Many trading companies use an excellent marketing ploy: the user rents his old refrigerator, computer or telephone, in return can purchase a similar product at a reduced price. The disposal of old equipment, organized in this way, promises benefits to each participant in the transaction, that is, the seller, the buyer and the recycling company, which is a very important link in the event.

The seller makes a profit due to sales growth, which fully justifies the discounts provided and the cost of shipping old equipment to the recycling company. The buyer gets the opportunity to get rid of obsolete equipment and profitably purchase a more modern refrigerator or telephone. The recycling company receives both valuable raw materials for processing, as well as working copies that can be sold at a reduced price.

Old household appliances can be sold to repair shops. Of course, no one needs a refrigerator or a TV, released during the existence of the USSR, but more or less modern units can be useful for repairmen. Of course, you won’t be able to get a big reward for them, but some money for a completely unnecessary thing will still be returned.

The second life of the old refrigerator

Before getting rid of the old refrigerator, you can try to find it useful application. Skillful hands, a little patience and imagination can give this unit, like many other things, new life.

An old and broken refrigerator can be used as a spacious chest for storing potatoes and other vegetables on the balcony. To do this, remove the evaporator located on the back wall and lay the refrigerator on this wall, that is, with the door up. Refrigerator shelves can be used as partitions to separate seed potatoes from what is expected to be eaten over the winter. The compartments between the shelves can also be filled with carrots, beets or other vegetables without mixing them in one pile.

Faulty but solid-looking refrigerator, can be turned into Dollhouse and then there will be no limit to the happiness of daughters and granddaughters. The ledges on the walls of the refrigerator allow you to create the required number of floors for the princesses in the future palace. To divide into floors, the shelves already inside the refrigerator are used, or you can organize additional shelves by cutting them out of plastic, metal, glass and other materials.

And you can still use the refrigerator as a multifunctional item, like the lower shelves in passenger cars. In such a capacious chest, you can store various items, ranging from the working tools of the head of the family to children's toys. In it you can hide a waffle iron with a meat grinder, and bags of cereals, and extra dishes, and shoes. Refrigerator-chest can be decorated different ways . For example, painting with bright colors or pasting wallpaper, beautiful pictures, wood paneling, etc.

Options for using an old refrigerator in the country

Landlords or country houses can accommodate non-working refrigerator for many useful purposes. For example, many beekeepers convert old refrigerators and freezers into bee hives, since it has long been noticed that bee frames are perfectly placed inside these units. To give these hives a more presentable look, they can be painted in the signature yellow and black stripes.

No one also forbids putting the refrigerator body on wheels and getting a fairly roomy vehicle for transporting earth, various garbage or humus. You can also make an excellent incubator from the body of an old refrigerator.. To do this, you only need lamps for heating eggs and a thermometer to control the temperature, and heat is stored in such an incubator due to good insulation of the walls of the case. If desired, it can be further insulated.

Some craftsmen turn an old refrigerator into a dryer for fruits and mushrooms, and someone makes a flower bed out of it. In the latter case, the refrigerator is placed on the back wall, and the lid is removed. The entire interior space is filled with earth and flowers are planted. The space around the refrigerator can be decorated with stones. The refrigerator itself can also be decorated with wooden planks, mats woven from vines or straw, or simply painted in your favorite color.

The flower bed can turn out to be even more spectacular if the refrigerator door is not removed, but fixed in a half-open position. In this case, blue flowers can be planted inside the refrigerator and give the flower bed the appearance of a flowing stream. If you use flowers of golden hues, for example, marigolds, you can get the effect of scattering "treasures".

The refrigerator door can also be locked in a fully open position. Then flowers are planted in the ground inside the refrigerator, and flower pots are placed on the door. Unrealistically beautiful compositions can be made from broken flower pots, if their shards are placed on several levels, planting plants on each of which and adding fantastic figurines for decoration.

In addition, from the old refrigerator you can make:

• cellar dehumidifier. To do this, cut two holes in the door or make a sealed cover with two holes. A fan is installed at the inlet (you can use a pull-in cooler from the computer's system unit). The principle of operation of the dehumidifier is as follows: the fan drives the air, and the moisture from it settles in the coldest place;
• firewood storage box, various garbage or compost;
• solar collector p for heating water;
• smokehouse. When making it, it is necessary to remove all the plastic, and install an electric stove inside, on which a container filled with alder shavings is placed. In such a smokehouse, you can smoke meat or fish;
• dryer for mushrooms and fruits. In this case, the shelves are replaced with grids, and a fan heater is installed below;
• dog house. To do this, the refrigerator is placed on a board mounted on bricks, so that opened door served as a kind of ladder for the dog;
• cage for rabbits. If you replace the doors with bars or just make holes in them into which bars are inserted, you can get excellent cages for rabbits.

Air compressor from an old refrigerator

Often compressor from the refrigerator is made for themselves by airbrush artists or painters who use it in tandem with a spray gun or airbrush. More powerful compressors can be used to pump wheels.

To make a compressor, you must first prepare all the necessary components. As a supercharger, you can use a conventional hand pump or any container for holding air. The role of the device for supplying air to the receiver will be performed by the compressor from the old refrigerator, so it is very important to properly dismantle it. First you need to have a bite to eat tubes that come out of the engine and lead to the grille. Next, we cut the wires that stretch to the relay, but they must be left about 20 cm long.

An excellent replacement for the receiver can be a fire extinguisher case. It is important that it be seamless and have a volume of 10 liters or more. You will also need car clamps, an oxygen reducer, a toggle switch, an RM-5 or RDM-5 relay, a shut-off valve, a fum-tape, a two-wire wire, a ball valve, a ¾-inch water cross with an external thread.

The refrigerator compressor, in addition to the inlet and outlet tubes, also has a third tube with a sealed end. The clogged part of the tube must be cut off with a hacksaw, but it is important to ensure that metal chips do not get inside. The remaining pipe must be flared and the oil in the compressor drained. Instead, it is necessary to fill in semi-synthetic automotive oil. Then the pipe is clogged with a screw wrapped in fum tape.

The plumbing cross is screwed into the fire extinguisher in place of the ZPU. When manufacturing the compressor, it is necessary to wrap all screw connections with sealing tape and additionally apply sealant to them. A relay is screwed onto the upper part of the crosspiece, which performs the function of regulating the pressure in the receiver.

Further, a check valve is installed on one of the inlets of the cross, to which a fitting is attached to connect the hose. With the help of a check valve, excess air pressure in the receiver will be eliminated when painting a car. An oxygen reducer with a shut-off valve is screwed onto another crosspiece inlet, which is necessary to shut off the air in case the pneumatic tool is replaced. To be able to connect the spray gun or gun to the tap, screw the adapter. Thanks to the reducer, there are no pressure surges in the supercharger, and the air flow is dense and uniform.

Finally, filters should be installed. A gasoline filter is installed in front of the air intake pipe, the main task of which is to protect the engine from dust, and the spray gun from oil and moisture. A diesel filter is attached to the outlet of the supercharger to keep water droplets out.

Heat pump from an old fridge

Any person theoretically has a fairly large selection of sources of thermal energy. In addition to coal, firewood, natural gas and electricity, it is also the sun, wind, temperature difference between air and earth, water and earth. Each energy source has its pros and cons that limit its use.

A heating system with a heat pump is very advantageous in terms of ease of use. Such a system is energy dependent, but The heat pump requires a minimum amount of electricity to operate.. Heat pumps are extremely economical in operation and do not require high maintenance costs, but the cost of pumps offered by manufacturers is quite high and not every home owner can afford it. If you assemble it yourself, using parts from an old refrigerator, you can save a lot on the family budget.

Homemade pumps literally cost a penny, but they have one drawback: the performance of homemade products is low, so they cannot become a full replacement for traditional heating systems. They are usually used as supplements or alternatives heating. But the heat pump can be installed anywhere. It is connected to the contours of underfloor heating, used in hot water systems. The main thing is to correctly select the type of system.

Distinguish between absorption and compressor heat pumps. Installations of the latter type are the most common. Exactly such a pump can be assembled from an old refrigerator. To do this, you will need a refrigerator compressor, evaporator, expander and condenser.

First of all, you need to remove the compressor from the refrigerator. It is the main structural element and will pump freon and water through the laid pipeline, ensuring efficient heating. The power of the installation is quite difficult to calculate, so you should focus on averages. For example, for a house with high thermal efficiency, a heating system with a capacity of 25 W / m 2 is required. For a well-insulated building, this figure is 45 W / m 2, and for a house with large heat losses - 70 W / m 2.

The compressor is mounted on the wall using L-shaped brackets. The condenser is made from a metal tank with a volume of 120 liters. To do this, the tank is cut in half. A copper coil is placed in one part of it, and then the container is welded and threaded holes are made in it. A 120-liter steel tank is also used for the heat exchanger. The thickness of its walls should be at least 2.5 mm. Wound on the tank copper pipe, the ends of which are fixed with slats. Plumbing transitions are connected to the pipe outlets.

A plastic tank with a volume of 90 liters is used as an evaporator. The evaporator does not heat up, so it makes no sense to use a metal container for it. The evaporator is also attached to the wall using brackets. After installing the main components, a suitable thermostatic valve is selected and the structure is assembled. At the final stage, freon R-22 or R-422 is pumped into the system. In the absence of relevant skills, a specialist should be invited, since the procedure is unsafe.

Next, the heat pump is connected to the intake device. The type of this device, as well as the features of connecting the pump to it, depend on the scheme of the system used. For the "water-ground" scheme, the collector is located below the freezing level of the soil, as are the pipes of this system. When using the "water-air" scheme, the installation of the system is relatively simple, since it does not require earthworks. To install the collector, you can use any comfortable spot on the roof or near the house. The design of the collector for the "water-water" system is assembled from polymer pipes, which are then lowered into the reservoir.

It is also possible to install a combined (bivalent) heating system. In this case the heat pump is connected in parallel with the electric boiler and it performs the function of additional heating. The use of a bivalent heating system allows you to achieve optimal temperature regime in the house, even when it is very cold. The energy consumption will be minimal.

conclusions

As we see, You can make a lot of useful things from an old refrigerator that will serve you faithfully for many years to come. Converted old units can significantly facilitate housework or become a spectacular decoration. suburban area. It all depends on your imagination and ability to use the necessary tools.

Many people sooner or later ask themselves the question: "Where to put the old refrigerator?". There is nothing strange in this, household appliances, like everything that is not eternal, are periodically replaced with a new, more modern one. As a rule, old refrigerators are very large and heavy, sometimes it is not easy to even take them out of the apartment. How to deal with the old device, so as not to harm yourself and others.

Disposal of household appliances

According to the norms of the law, overall household appliances have certain disposal rules. Therefore, it is forbidden to simply take the refrigerator outside and leave it near the garbage dump. For such amateur performance, a considerable fine can be “soldered”. It is very important to adhere to existing disposal regulations.

Conscious citizens, united in HOAs, periodically order special containers for the removal of large-sized garbage to the house. Such a need for residents apartment building very relevant. Therefore, do not be too lazy to call the HOA and find out if there is such a practice of garbage collection in your home. If yes, find out the schedule on which the cars run.

In civilized settlements with a rather large population, municipal services should function, in the scope of which the issue of disposal of equipment falls.

Advice

If there is no HOA in your house, contact the housing and communal services authorities, they should tell you how to deal with the old refrigerator, without violating the law. But, as a rule, you will have to pay a lot of money for the removal of a refrigerator through the efforts of housing and communal services, save if you do not hire movers.

Important!!!

"Junk companies" can help get rid of old equipment, this service is usually paid.

Analyzing the "legitimate" ways to get rid of large-sized equipment, it is not at all strange why people are looking for other alternatives.

Store promotions

It is now a fairly common trend when large supermarkets of household appliances arrange promotions "Replace old appliances with new ones." Of course, everything is not quite right, it is not profitable for a store to change the old one for a new one, but when you return the old refrigerator, you can get a significant discount on the purchase of a new one. As a result, it turns out to be very profitable, so do not be lazy to sometimes pay attention to the promotions of stores on the Internet and on billboards.

ads

Scroll through local ads in newspapers, magazines, websites, there are sure to be profitable and not troublesome options for getting rid of the refrigerator. Look for the headings “Buy a refrigerator for spare parts”, “Removal of old equipment for free”, “Buy a refrigerator (pickup)”, etc. In the best scenario, you can "kill" two birds with one stone: free up useful space in the apartment and help out some money.

Advice

If the monetary benefit for you is a secondary point, which may not be, then you yourself place an ad in the newspaper with approximately the following content: “I will give the refrigerator for nothing on the terms of self-delivery.” As a rule, they react to such words very quickly, in ten minutes you will already have to answer calls.

Use with benefit

Many people are in no hurry to put up with the fact that the old refrigerator has served its purpose and are trying to give it a new life, but now in a different capacity. Such people are the owners of "golden hands", endless imagination, they have a lot of ideas in their head on how to use an old refrigerator in an unconventional way. To begin with, with your own hands or with the help of a specialist, you need to drain the freon from it, after which the refrigerator case becomes a real springboard for home craftsmen.

Few people know that from the refrigerator you can make a smokehouse for meat, as well as a dryer for vegetables and mushrooms. Some craftsmen build their cases of the refrigeration unit incubator. The refrigerator can be buried in the ground somewhere in a shady place and used as a mini-cellar.

If the old refrigerator has good thermal insulation, you can make a good country greenhouse out of it. To do this, the door is removed from the curtains, and instead they simply cover the box with transparent glass. The refrigerator cabinet in the garage often makes a great tool storage cabinet.

Smokehouse from the refrigerator

Conclusion:

The fact that the refrigerator is old is not a reason to send it to the trash, the refrigerator can be used for various useful purposes, the main thing is to have a head on your shoulders and " right hands". We have already given you a few ideas. And remember, if you want to get rid of the refrigerator completely, never throw it away in the wrong place.

There are many options for using old washing machines and refrigerators, both quite practical and decorative.

Ideas for Reusing Old Appliances

Everything breaks sometime. Washing machines and refrigerators are no exception. If your equipment has already definitely fallen into complete disrepair and cannot be repaired, do not rush to throw it in a landfill. There are many options for using old washing machines and refrigerators, both quite practical and decorative.

Flower pot from the drum of an old washing machine. It is quite nice and roomy, it is not afraid of moisture, it will last a long time, because metal is a very reliable material. You can paint such a flowerpot for plants in any color.

The whole washing machine became a flower bed, even a container for powder and rinse aid was used. Of course, such a piece of household appliances looks strange surrounded by greenery, but in general it is a very interesting option, an original element of landscape design.

The most popular way to use an old drum from a washing machine is a brazier. You can cook on wood and coals not only kebabs, both a pot and a frying pan will conveniently stand on top. At the same time, making such a brazier is very simple.

This is already an improved version of the barbecue from the washing drum, on a tripod. By the way, the design is quite light, it is easy to carry around the site. As an option, it was possible to equip a stationary place for an outdoor hearth by arranging a convenient platform around the drum.

And who will say that it is ugly - reflections of the flame in the holes of shiny metal. Such a brazier does not look at all like an old and useless thing, but a relevant and practical element of a personal plot.

From a very old washing machine, or rather, its rounded metal case, you can make a smokehouse for fish and meat products.

This is how the drum of a washing machine, which the designer or the owner of the house with a rich imagination has worked on, can look elegant. By the way, in the empty case of such a pedestal-seat with a soft pillow, it is quite possible to store all kinds of little things.

And again a flower bed in a whole washing machine. Beautiful bright petunias smoothed out the brutality of the plain metal body of the equipment, which obviously served for many years until it turned into a flower bed.

Wardrobe in an old refrigerator. The case was painted, there are few shelves, but they are quite roomy, and various little things fit in the former freezer.

Even if the refrigerator itself refused to freeze, this cannot prevent you from using it to cool drinks during an outdoor party. A simple wooden plank finish looks quite attractive, and the ice under the now hinged lid will last for a long time.

An incubator in an old refrigerator case. It will retain heat, especially if it is additionally insulated, you only need lamps for heating eggs and a thermometer to control the temperature. A good option for those who want to start breeding chickens.

House for puppies. It turned out a separate bed and dining room. For a larger dog, the refrigerator case would also be suitable as a bed, you just need to remove the shelves.

A chest for potatoes and other vegetables. If there is no cellar - a good place for storage. A refrigerator dug into the ground will heat up and cool slightly, less likely that the potatoes will germinate or, conversely, freeze. published