Open door without intercom. What are the options for hacking, or how to open an intercom without a key. Secret codes for opening intercom doors
Situations can be completely different: quickly gathering in the morning, the key to the intercom was forgotten or lost, and you need to enter.
Houses equipped with intercoms are found everywhere, but not many people know how to open them without a key.
If at the entrance you find that there is no key to the intercom, first of all it is better to contact the neighbors.
Dial the neighbor's apartment number, press call and explain the situation. In most cases, this is bypassed and you can pass unhindered. But there are several obstacles in this case.
Firstly, not all apartments have return answer systems - some, for example, do not use them, but only use keys. Secondly, suspicious neighbors may simply not believe and prevent the penetration of a stranger who does not live in the entrance.
In such cases, it is advisable to knock on the windows to the residents of the first floors. Usually, the neighbors are understanding and unlock the door from the inside. If none of these methods of opening without a key suits you, you will have to use the code.
Do not try to break the device. Disabling it does not guarantee that the door will be open - the latch may be in the door and then they will not be able to open it even from the inside. In addition, repair and re-installation will fall on your shoulders, and this is quite an expensive pleasure.
The principle of operation of the device
To open an intercom without a key, you will need a little knowledge of its structure and principle of operation. In fact, the intercom is a set of chips. The manufacturer comes up with a personal algorithm for the operation of these microcircuits and provides the device with unique software in order to secure its use as much as possible.
However, general principle work comes down to the fact that the microcircuits are programmed to perform one or another action when receiving a code, or when reading a card or key.
In addition, for maintenance and service work with the intercom, there are special codes that enable employees to repair or check the intercom. Entering the service operation mode, you can easily open the intercom without a key, but this mode is different for all intercoms.
You can ask for the code for the service mode of the manufacturer or installer, but the latter do not always trust the residents so much. Although this will allow residents to get rid of cards and keys.
Thus, in order to open the door without a key, you will have to familiarize yourself with more time-consuming, but effective methods of opening, depending on the brand and manufacturer of the intercom.
Barrier
Barrier 2 or Barrier 2M intercoms are quite outdated models with a mechanical system.
They open if you type the number 1013 on the keyboard - these numbers are unchanged for all Barrier devices.
Maybe for this reason, many are switching to more modern devices. In addition, such an intercom opens with a magnet. Ordinary magnets, for example, from music speakers, can open the door if they are passed over the field where the chip is applied.
CYFRAL
More modern and widely used intercoms. You can open them through the service mode only when there are apartments in the entrance with numbers divisible by one hundred. For example, if there is a hundredth, two hundredth apartment, and so on.
To open, press the B key and dial the number of the apartment. For example, in your house there is a three-hundredth apartment. Then you press the B key, then enter 300 and press B again.
Now enter the numbers 2323, and in case they do not work, perform the operation with the following codes: 7272, 7273.
The CYFRAL-M model is opened by pressing the call and then entering the code 41, or 1410, or 07054.
The latter code is quite rare, but also possible.
Metacom
This unit opens without a key in several ways. Therefore, if one of them did not work, try the following, since the model is quite well protected from unauthorized entry.
- the first way: first “Call” or “CALL”, dial the number of the first entrance to the apartment, again “Call” or “CALL” (the COD entry will be displayed on the screen, then you need to enter the numbers 5702);
- the second way: type 65535 on the keyboard and press "Call" or "CALL", then dial 1234 and again "Call" or "CALL", then press 8;
- the third way: dial 1234 on the keyboard, press "Call" or "CALL", then press 6, again "Call" or "CALL", and then dial the number 4568;
- the fourth way (for METAKOM MK-20 M/T): press the "Call" button, dial 27, press "Call" again and dial 5702;
- the fifth way (for METAKOM MK-20 M/T): press the "Call" button or B, dial 1, again the call button or B, then dial 4526 and bring an empty chip to the card reading field to program.
VISITS
Most VIZIT intercoms can be opened with a combination of 12#345 or *#4230. New models can also open with codes 67#890 or *#423.
If you are sure that the device is working and has not been opened before, and the codes provided do not work, you can try the following method.
Dial #999 and wait for a double beep. Then the service code is entered, most often 1234.
If this code is not working in your case, you will hear a double beep after entering the master code. If a worker - one beep.
In cases where the master code turned out to be incorrect, try the following codes instead of 1234: 0000, 3535, 9999, 12345, 11639, 6767.
If, after dialing #999, you hear one beep, this means that the device was previously opened and you need to look for another way to open it.
Techcom
You can open it only if you have a key, and the method is suitable for those who, having a key, forgot the code.
To do this, three different numbers are closed with one hand, and then released in the reverse order. For example, closed 160, open - 061.
A beep should follow, followed by a green light. Dial 4321, press B, then dial 3 and B again. After that, you can substitute the key.
CCD
The opening algorithm with the intercom CCD-2094M is as follows:
- to enter the entrance, enter 0000, press B - the COD entry should be displayed on the screen;
- then press 123400 and again B - the screen should display the entry F0, after it dial 601;
- if 123400 didn't work, dial either 456999 or 123456 instead.
For CCD-2094.1, you can open the door like this: dial “Call”, then 0000. Further, two scenarios are possible. Either the door will open and you can enter the entrance, or the service panel of the device will open.
In the second case, ON will be displayed on the screen. After it, click on the deuce. If after a deuce you see the entry OFF on the screen, then the factory settings have been changed, and you won’t be able to get into the entrance.
ELTIS
A model that is quite difficult to work with without a key, since the code does not work on all models.
Try the following sequence of actions: press B, then enter 100, press B again and enter 7273.
If the code does not work, try entering 2323 instead of 7273. You can also enter the codes described for CYFRAL models.
RAINMANN 2000
You can open the Rainman intercom without a key as follows: press the button with the image of the key, then dial 987654.
There will be two beeps, after which you need to dial 123456. The screen will show P, then press the eight.
DOMOGUARD
Almost all DOMOGUARD models open in this way: press C, you will hear a beep. After it, you need to quickly dial 669900 and immediately click on "Call" or "CALL".
Now they dial a number one higher than the last one in the house. For example, if the last apartment in the house is under the number 73, after the "Call" you need to press 74.
The combination F will appear on the screen and then press 080.
T-GUARD
To open the entrance with the T-Gard intercom without a key, there is a short algorithm.
Press "Call" or "CALL", quickly enter 00000 and immediately press "Call" twice quickly.
You need to do everything very quickly, otherwise the door may not open, simply not recognizing that you want to enter the service mode.
FACTORIAL
Such devices are opened with a set of six zeros or 123456.
If the set did not work, press and hold 5 until text appears on the screen. Then enter 180180 and the "Call" button. Then dial 4 and "Challenge" again.
Universal codes
As a rule, for ease of maintenance and work with the entrance or the device itself, a universal code is set at the factory setting. Such a code can be purchased from the installers who will install the intercom, or on the Internet.
Some devices different models can be opened with one such key. For example, Visit and Eltis. But the new Digital model does not provide for such a code at all.
Manufacturers put such keys into the program, and they work even if the device is completely devoid of memory cards and memorization.
Keys can be created for the model and be working in any city, such as Metakom. Some keys open models only in a particular city, as they are implanted by the installer.
Sometimes, the keys only work in a certain area - this is done for access by postmen and service organizations. Therefore, in extreme cases, you can ask the janitor to unlock the door for you, if there is one in the yard.
Conclusion
You can open the intercom without a key only if you are sure that the device has not been opened before, that is, its factory settings have not changed.
In addition, you will need knowledge of the manufacturer and intercom model. In most cases, the above codes work, but it will not be superfluous to contact your neighbors if the settings have been changed and you cannot enter the entrance.
How to find the intercom codes at the address of the house. We open any intercom without a key.
The intercom key can be:
- factory. The code is assigned at the factory, we will consider such a device as the original.
- Clone. This is a copy of the key.
- blank(preparation). The key is empty, containing no code.
To make a clone of a key, you need an empty blank. The secret combination is read from the original or another clone, and then multiplied by an empty blank. This method is always used to make spare or lost keys.
The flashing device itself is called a duplicator.
Key programming- entering a unique key number into the intercom database. When coding a tablet, nothing is written into it, as many mistakenly believe.
A blank (an empty key that does not contain a single code) cannot be programmed into an intercom!
You can register the key to your intercom in at least 100, at least 1000 compatible devices. It's just that your code will be added to these new intercoms.
When you add your intercom key to your mistress's intercom, no one will know anything. The only condition is device compatibility.
Determination of intercom codes by house or address.
If you are trying to find out the intercom code at the address of the house, then you first need to find out which manufacturer protects the doors at the desired address. Ideally, you should also know the model, because the number of possible combinations will decrease significantly and increase the chance of success.
There are a lot of equipment manufacturers and any of them can be installed in your home. It makes little sense to keep statistics for each house, at least we have not yet come across such information.
For urban residents, you can pre-determine the type of installed equipment using panoramas from maps: Google and Yandex.
Intercom at address right house from google maps.
In Google, in the lower right corner, the year of the picture is displayed. Keep this in mind, because the intercom can eventually be replaced with another brand.
If the inscriptions are not readable, then you can try to establish the manufacturer by external distinctive features and shape.
A universal way to open any intercoms is to turn off the power.
Have you ever noticed that if the landing inside the entrance is de-energized, then the intercom almost always does not work.
To protect the intercom system from sudden shutdowns, uninterruptible power supplies (UPS) are installed. But since this increases the cost of the entire system and the cost of its maintenance (you need to monitor the battery and change it in time), service organizations simply do not do this.
Is there no light in the hallway at night? Most likely, the intercom will also be de-energized at the same time.
During long shutdowns, the BBP will be discharged and the magnetic lock of the front door will also be opened.
We open any intercom without a key.
We recommend using this method of opening only in extreme cases. A breach in the security system is the ability to open a magnetic lock, bypassing a call to the subscriber's device, located, for example, in an apartment. To open the lock, you will need to close two power wires going to the call panel.
Eminent manufacturers of intercom equipment recommend drilling the slots of fasteners during installation and closing them with decorative caps that are included in the package. And if possible, mount the intercom panel on the reverse side, if the design provides for it.
To increase protection, some manufacturers additionally cover the electronics on the back with a metal casing, which will require a lock to remove. That is, even if an attacker manages to unscrew the call block, he will not gain access to the device.
In fact, everything may turn out to be wrong, and in many respects it depends not even on the equipment, but on the conscientiousness of the installer.
Additional protection is more often used on expensive or multi-user equipment (for MKD).
The figure shows that in order to remove the protected equipment, a specific "secret" key with an axis offset is required.
Table of codes for intercoms of different models.
| intercom | Service opening code | Universal opening code | Other secret intercom codes |
| Belsplat (Belsplat) | see: Opening the Belsplat intercom through the programming mode | *3801 *1111 |
*6491 *6492 *6493 |
| Golden eagle | To open the intercom Berkut LS 2001: 1-key-5702 100-key-7272 100-key-7273 |
key-123456-key-5150-C key-123456-key-206-C key-123456-key-6140-C key-123456-key-2589-C key-1234567-key-4455-C |
Change the code to your own. Enter on the panel: key-23456-key-"xxxx" wait for the sign "F", press "9" and "key". We type a new four-digit password. Where "xxxx" is the old password. |
| Dacsys (Dacsys) | see access to Daxis programming mode | Not detected | Not detected |
| House ru, Beward | see: Control and integration of video intercom Beward DKS 15120 (Dom.ru) into IP network | Not detected | 98220-B |
| Pulse | see doorphone opening Impulse through programming mode | "B"-99911-"B" | 1234-"B" 2015-"In" 123456-"B" 123400-"B" |
| Keyman | see access to Keyman programming mode | “K“-100-789-123456-8 | “K“-170862-0 |
| Cron | Absent | Not detected | 951 9999 |
Error on the intercom screen and opening the magnetic lock.
I was able to open the door of someone else's intercom with my key.
Intercom keys can be different types and different manufacturers are incompatible with each other. The reader should not react to such keys in any way.
I remember, a long time ago, I tried to playfully open someone else's front door by attaching my key to a tablet. The intercom emitted a squeak, an error appeared on the screen: Error, and the magnetic lock opened for a moment. I quickly grabbed the handle and opened the door. I closed the door and tried to repeat the trick, but nothing came of it. If you have many different keys, you can try.
Universal code for opening any intercom.
You will need a master key. There is no Miracle-Yudo key that will open any intercom! Even because the keys can be of different types and are incompatible with each other. Plus, add the competition of manufacturers, where can they all agree among themselves?
A universal key can only be made within one service company or within one small town or village.
We take one key and register it in all the devices that we service. And don't forget about type compatibility!
Duplicates can be distributed to postmen, plumbers, electricians of the ZhEK or HOA.
How to open the intercom Belsplat (Belsplat) without a key.
JSC "Belsplat" - Belarusian manufacturer of intercoms, metal doors and products to ensure the safety of residential and industrial facilities.
The management of belsplat is looking for new markets for the sale of products and is negotiating to promote products to the international and Russian markets.
Opening the intercom Belsplat through the program mode.
Recruiting 2698
, input confirm *
. The display will show " pass". Enter 123456
(factory code during installation), confirm with the button *. Next, dial the service code 3 and an asterisk. We come up with and enter a new common code (4-6 characters) *.
Code replaced, exit #.
How to open intercom Berkut.
Intercoms Berkut are available in two versions: KS and LS, which differ only in the appearance of the call panel and the maximum number of possible subscribers.
The codes for opening Berkut are given in the general table.
How to open a Dacsys intercom without a key.
The Daxis intercom call block is designed to connect the following devices to the central bank: Daxis, Marshal-Raikmann, Laskomex, Proel, Keyman Polylock.
Opening or hacking Dacsys intercom doors using admin mode.
There are two login options to access the features:
1. We type on the keyboard * 230911- "four-digit code". Upon successful entry, we see the inscription on the screen: F-..., then enter the 2-digit function number "*"
2. We apply the master key, the inscription appears: F-..., then enter the 2-digit function number "*"
"four-digit code" - try the standard codes 0000, 1234, 1111, 9999
function numbers:
01 - change installer master code
90 - lock opening test
98 - open intercom and exit administration
How to open the intercom Dom.ru, Beward without a key.
The company began to develop actively since 2001, during which time it has managed to turn from a small fish into a huge whale, joining dozens of companies. Among the major ones is the Internet provider of St. Petersburg Interzet (LLC "PERSPEKTIVA").
So in 2014, Dom.ru and Interzet merged.
Let's start with the fact that in 2018 Dom.ru (JSC ER-Telecom Holding) won the tender for the purchase and installation of intercoms under the state contract provided for by the city program of St. Petersburg "Safe City" (N58 / 18 dated 03.05.2018) in the amount of 548.4 million rubles. Now Dom.ru is obliged to install 8532 video intercoms within 3 years.
Rostelecom took part in the tender, but Dom.ru bypassed it during the auction. The complex is aimed at detecting and preventing offenses in the city. For installation, Smolny chose the most problematic areas of the city: Nevsky, Primorsky, Vyborgsky, Kolpinsky, Petrogradsky, Admiralteysky, Kalininsky, Moscow.
Download full list installation addresses:
To prevent government investments from being wasted money, Dom.ru purchased digital video intercoms from Beward, DKS15120 series. According to Yandex Market, the cost of one intercom at the end of 2018 is from 36,000-40,000 rubles.
Consider what this miracle of engineering is.
The intercom panel, in order to accommodate all the goodies, has a rather impressive size: 260x150 mm. A blind person can easily find the call buttons and dial the desired apartment.
The intercom is equipped with a 1.3 megapixel 1280x960 video surveillance camera and a 1/3" Sony Exmor matrix, which is very good for pinhole lenses. Sony Exmor has a sensitivity of 0.003 lux in the dark. IR illumination up to 10 meters.
The declared horizontal angle of view of the camera is more than 100. Now it's impossible to sneak up unnoticed!
As with all intercoms, a speaker and a microphone are mounted in the panel.
From know-how: a button for accessing operational services appeared on the call block.
All digital intercoms Dom.ru are combined into local network and connected to the Internet. The provider promises to distribute free Wi-Fi in the local areas.
Modern IP intercom from Beward DKS series can be used as a full-fledged video surveillance camera. You can set up the broadcasting of audio and video streams when dialing a subscriber, at the time of motion detection (when the door is opened). Which, in fact, did Dom.ru. After all, this is what it was all about! The recording from all the cameras is most likely archived and processed within the framework of the program: "Safe City".
Now imagine if Safe City uses facial recognition software for all of its installed intercoms, then immediately it becomes possible to calculate a person from a picture or an identikit. This seems to be good: you can search and catch criminals! But on the other hand, this is an interference in the privacy of people, because there are no guarantees that this data will not fall into "dirty hands".
Let's talk how to open or hack IP intercom Dom.ru.
Beward intercom used by Dom.ru, anti-vandal, in a metal case. When you try to steal it, the panel opening limit switch will work and the dispatcher will immediately receive an alarm message with the coordinates of the incident.
When connecting a new object to the intercom, Dom.ru first assigns a common code combination for the entire entrance, house, or even district. In this mode, the system operates for several months, while residents receive or purchase electronic keys. Further, the password is disabled, and entry is possible only by wireless tags or using mobile application.
To connect the mobile application to your intercom, a monthly subscription fee is charged. If connected, your whole family will be able to see the caller, even if you only have a handset in your apartment (without a screen).
You can also open the door to the entrance remotely via the Internet using a smartphone. Miracles, nothing else!
Wireless tags go to the apartment with the calculation of 2 pcs for free, you will have to pay extra for each additional one. At first it cost 150 rubles, now it costs 200 rubles.
Cost of use.
Dom.ru does not take money from tenants for the intercom itself (because it is the money of the city), but will gladly replenish your receipt with new subscription fees for the service.
Management and integration of the video intercom Beward DKS 15120 (Dom.ru) into the IP network.
The device is able to integrate with Sip devices of any manufacturer, which opens up huge opportunities for the user: switching to PBX, IP telephony, Sip monitors, etc.
Since the video intercom is connected to the apartment, using Sip equipment you can test the reliability of the system and try to bypass it.
By default, 3 accounts are built into the intercom:
- Administrator, login and password: "admin / admin" (Administrator is the main account without access restrictions)
- User1, login and password: "user1 / user1"
- User2, login and password: "user2 / user2"
NOTE! Logins and passwords are case sensitive.
We open the intercom Impulse without a key.
Russian manufacturer "Proton-Impulse" from the city of Orel. For 2018, he stopped the production of intercoms under TM Impulse. At least, we did not manage to find modern intercoms of this "CJSC". The company is engaged in the development and production of electronic components for related industries, has a workshop for the production of printed circuit boards and plastic injection.
At one time, Impuls intercoms have established themselves as inexpensive and easy-to-use devices.
Even despite the overly sophisticated and inconvenient programming menu.
We open the intercom Impulse 40 D, DS, SD, S through the programming mode.
Press the call key "B". Enter 27521412, press "B" again, then 10 "B" 0 "B", 11 "B" 0 (zero) "B" 01 "B" "Come up with a new 4-digit opening code" "B" 000 "B" "C" "B" "B". We are waiting for the symbol E to appear on the display, when it flashes on the screen, press "C" 2 times.
We open the intercom Impulse. "B" "new invented code" "BB". The display will show "Open" and the intercom will open.
How to open intercom Keyman (Keyman).
The Russian company has been producing equipment since 1996.
The modern line of Keyman digital intercoms is divided into two groups:
POLYLOCK
- POLYLOCK PRO
They differ in form factors and workspace of the typing keyboard.
Both series do not have mechanical components in the keyboard area. The call panel itself is unique: all-metal duralumin construction 10 mm thick with a touch keyboard.
Keyman provides one of the best offers in terms of durability and wear resistance of outdoor panels on Russian market, stating that the design does not require maintenance throughout the life of the equipment!
Access to the programming mode: K-[...]-170862-|signal| "XXXX"
170862 - manufacturer's factory code
XXXX - code set by the installer
Once you have entered the codes correctly, the P programming mode will be displayed on the screen.
Enter 0 - and the electric lock is open!
Keyman intercoms are a reference modern device, with reliable software, which cannot be opened or hacked without attracting attention.
The table shows a working universal opening code suitable for the entire line of Keyman intercoms.
We open the Cron intercom without using the key.
Sometimes you need to open the intercom using a magic code that only those living in this entrance can know.
With Kron intercoms, everything is a little different, because the installer program, when setting up the device for the first time, requires changing code 951 to any other.
The chances that the master installer will replace the code with the same one are small, but still there. Try to open.
To date, this kind of equipment is installed in almost all entrances. The mechanism activates a special electronic key or a set of code combinations. In practice, there are situations when the key to the intercom for various reasons is missing. In this case, you can use the universal code to gain access to the premises.
To configure intercom equipment, you must open access to the program mode. In most cases, special codes from intercoms are dialed on the call panel. After entering the programming mode, you can open the door and change the set settings. Service ciphers are set during production. When installing the device itself, the masters, as a rule, do not change them. This allows you to open the intercom without using a key.
The scope of application of universal ciphers
When using a code for intercoms of any kind, it must be remembered that there are no single passwords for all models of equipment from different manufacturers. At the time of production, each model of the access mechanism has a programmed special code. The code information is contained in the settings menu. There are situations when the code information was changed during the installation process. Then only a professional master who carried out the installation of a particular mechanism can provide assistance.
There are no universal codes, as well as universal keys for all types of intercoms. This is related to the manufacturer, type of equipment, installation process, etc.
Universality lies only in the coincidence of code information on intercoms of the same brand and different models, but of the same manufacturer. When attempting keyless entry, remember that unauthorized entry is punishable by law. The exception is emergencies, in which the residents of the house fall.
Pictured intercom Vizit
Special passwords for Vizit intercoms
Mainly in apartment buildings Vizit intercoms are installed. They are activated with a magnetic key. In the absence of an identifier, you can use a special code for the intercom. The default password is #4230 or #423. If the factory firmware has not been changed during the installation process, the front door will open.
Universal passwords for intercom Cyfral CCD
The code for the intercom Cyfral CCD is also not the same. The variety of cipher information depends on the model range. The following passwords are suitable for such mechanisms:
- Call button + 41;
- Call button + 1410.
Sometimes the door opens after entering the code 07054. In a situation where there are apartments in the entrance with a multiple of hundreds, you can try the following codes:
- Call, apartment number (100,200,300, etc.), call button, number 7272;
- Call, apartment number (100,200,300, etc.), call button, number 7273.
If the listed intercom codes did not fit, and the front door did not open, you can try to perform other actions. On the calling panel, dial the combination 0000 and press the call button. After about a couple of seconds, an inscription will appear on the screen. Next, you need to enter the code 123456 or 456999 and press the call button.
For the Cyfral CCD 2094 model, these tips may also be useful:
There are some models where you need to enter the code 123400. After a few seconds, the universal key will give you access to the settings menu. If there is no purpose of changing the settings, it is enough just to enter the password 601 for quick access to the room.
Intercoms Metacom and codes for them
The video shows several ways to open it, after watching you can choose the right one for your model:
Codes for intercom Marshal
And again, a practical video in which several models are considered, including Marshal video intercoms:
Code for the Forward model
Step-by-step instructions for replacing the code with your own version in Forward brand models:
Special ciphers for some intercom models (Rainmann, DomoGuard, T-Guard)
The code for the Rainmann intercom can only be called universal if the display has a dot on the left. To open the front door on the call panel, you must press the "key" button. After that, a combination of numbers 987654 is entered. After completing these steps, a double beep should follow. Next, you need to enter the code 123456. If all the steps are performed correctly, the display will show information about entering the settings. The number 4 can be used to lock the door. By pressing the number 6, you can turn off the equipment. By pressing the number 8, the door will open.
DomoGuard branded intercoms are more difficult to open without using the provided master key. Special codes will allow the door to be opened only after entering the service menu. It is necessary to press the "C" button on the panel, a single-tone sound signal should follow. Next, enter a combination of numbers 669900. Immediately after that, press the call button and the apartment number. In this case, the number of the apartment must be one unit higher than the number of the limiting apartment in this entrance. If all actions are performed correctly, the service menu will open. To open the door, code 080 is entered. To program a new key - 333, to disable the door lock function - 071.
Using the universal codes for T-Guard intercom devices, you can gain access to the premises without much effort. To do this, the call is pressed on the call panel, then the password 00000 and again the call button twice.
When performing these actions, it is important to make the last double press of the call button very quickly. After entering the password, the door opens.
Codes for Factorial Models
Intercoms Factorial are similar in their system to Tsifral devices. Universal codes allow you to enter the service menu. Often use combinations of 000000 or 123456. Professional craftsmen who carry out the installation and subsequently Maintenance Factorial equipment claim that it is impossible to open them without a key. This is due to a change in the factory firmware and a change in codes.
It is possible that when installing equipment of this company, one of the conditions is a change in service settings. The cases are different, and yet you can try to enter unique codes to open the door. The number 5 is pressed on the call panel. Within five seconds, a message appears on the monitor about entering the service settings. Then the combination is dialed: 180180, the call key, the number 4 and again the call button.
On the video - the use of a universal code:
Let's say you work as a courier, you forgot your keys, you want to surprise your loved one, and so on. How to quickly get into the entrance if you do not have the keys to it?
Of course, you can simply dial the number of any apartment on the intercom and ask to let you in. But if that doesn't help, access codes and master keys come into play.
We will tell about them today.
First know what awaits you according to the law
This article is for informational purposes only. You use all the information below at your own risk.
Important: if you enter someone else's entrance, then this will not be considered illegal entry into the home. But if you damage the intercom or the door, then this is already a burglary, damage to property and liability under the Code of Administrative Offenses and the Criminal Code of the Russian Federation.
Do not try to open the door by applying a stun gun to the intercom key reader! Some intercoms are protected from this, but most of the models fail when hit by a shocker.
Also have Art. 36 LCD RF. She says that the apartment owners own the common property of the house, for example, entrances, elevators, basements, on the basis of common shared ownership.
So, the owner of any apartment has the right not to let into the doorway of a stranger. And he may ask you for documents that certify your right to be in the entrance.
If you just entered the entrance, it is unlikely that it will come to court and fines, but they can raise noise. If the tenants prove that you entered the code from the intercom V selfish purposes , then this is a reason to go to court.
And one moment. If you have an intercom in the entrance, but you do not want to pay for installation, maintenance and keys, you have every right. Contact the intercom company and present the registration. They are not required to give you a key, but they must give you an access code that will allow you to open the door and enter the entrance.
What kind of locks are in intercom doors?
Appearance electromechanical lock
Entryways with intercoms usually have either electromagnetic or electromechanical locks.
Electromagnetic lock - a coil of steel core cable, which is usually installed in door frame. When voltage is applied to the coil, it attracts a polished metal plate fixed to the door leaf.
Typically, an electromagnetic lock is powered by a source direct current. The higher the power of the lock, the more difficult it is to tear door leaf from the box.
But if the electromagnetic lock is old or cheap, you can try to forcefully pull the door towards you. Some models are designed for holding force only 50 kg(but more often by 700 kg and more). It is not so much the strength that is important, but the sharpness of the jerk.
WITH electromechanical lock that won't work. Here the bolt and the latch go into the grooves on the door frame, you can’t get them out of there by jerking the door.
Another option is to take a powerful electromagnet. You need to position it with reverse polarity to the retaining plate in order to compensate for the field from the coil.
Where to get and from what to power the electromagnet, history is silent ...
Finally, intercoms sometimes open with an ordinary lighter. It is necessary to remove the piezoelectric element from it and strike a spark several times on the key reader. But this is fraught with damage to the intercom.
Secrets of intercom manufacturers: loopholes and tricks to open
For intercoms of popular brands, access codes are known. They do not guarantee that you will get into the entrance, but ... increase the likelihood.
At the factory, standard firmware is uploaded to intercoms with the same codes. During installation, intercom specialists do not change the default settings in about 90% of cases. So the factory codes work often, but not always.
Intercoms Vizit
To get started, try the standard combinations:
▪ 12#345
▪ 67#890
▪ *#423
▪ *#4230
▪ *#3423
▪ #196.
If there are no "*" and "#" buttons on the keyboard, press "C" and "K" respectively.
The service menu of the device can be called by code #999. If the call is successful, the intercom will emit two intermittent beeps.
After that, you can enter one of the combinations:
▪ 1234
▪ 12345
▪ 0000
▪ 9999
▪ 3535
▪ 6767
▪ 7056
▪ 11639.
After a successful combination, the intercom will emit one short beep and open the door. In case of failure - two signals: try the next combination.
To exit the menu, press "*".
By the way, if you successfully entered the menu with code #999, you can press 3 and attach a new key to the reader. If the intercom has enough memory, it will remember your key, and you can open the entrance door with it.
Intercom Metakom
Models with a numeric keypad can be opened like this:
1. Press "B" (call button).
2. Enter the number of the first apartment in the entrance.
3. Press "B". After that, the inscription COD may appear on the intercom display.
4. Dial the combination 5702.
You can try opening Metacom MK-20TM intercoms with a clean tablet key. She starts the programming mode, and at the same time opens the door.
Intercom Cyfral
Everything is a little more complicated here: the combinations depend on the model. For example, if the model has the letter "M", the combination "B" - 41 - "B" - 1410 may work. Sometimes instead of "B" there is a call button with a call symbol.
You can open the entrance with the intercom CCD 2094 if you go to the service menu - enter the combination 0000. For CCD 2094M, the combination 0000 - "B" works. After that the logic is the same:
1. “COD” will appear on the screen.
2. Enter the combination 123400, 123456 or 456999, press "B".
3. When you see "F0" on the screen, enter 601.
Model CCD 2094.1M can open the combination "B" - 0000. Usually, after this, the display shows "ON". This means that the installers did not change the standard codes. Press 2 and the door should open. If you saw the inscription "OFF", then when installing the intercom, the quick entry mode was disabled.
In addition, if there are apartments No. 100, 200, etc. in the entrance, you can use the code: the number of such an apartment is “B” - 2323, 7272 or 7273.
You can also try combinations "B" - 2751 or 07054.
Intercoms Forward
Universal codes for these intercoms:
▪ "K" - 1234
▪ "K" - 557798 - "K"
▪ 2427101
▪ 123*2427101.
If there is no button with the letter "K" on the keyboard, press the button with the key instead.
You can add your key to the intercom memory by entering the combination 77395201 * 0 *, then attach the key and double-click on "#".
Intercoms Eltis
The logic is the same - entering combinations:
▪ "B" - 100 - "B" - 7272
▪ "B" - 100 - "B" - 7273
▪ "B" - 100 - "B" - 2323.
▪ "B" – call button.
If that doesn't work, you can try 200, 300, 400, etc. instead of 100.
Sometimes the combinations 9876 - "B" or "B" - 12342133123 help.
If the installers have changed the standard codes, you can try to find out the new value. Press "B" and wait 20 seconds. Five digits will appear on the screen for a fraction of a second. Memorize them or shoot a video on your smartphone. The numbers can be used in combinations above.
Intercoms Factorial
Models from the factory open with simple combinations:
▪ 000000
▪ 123456.
But most often the installers remove them.
Intercom Marshal
For these intercoms, you need to know the number of the last apartment in the entrance. Add one to it, enter this number. Then dial the combination "K" - 5555 or "K" - 1958.
Intercoms Laskomex
Often, the installers of these intercoms tell the residents of the entrance a four-digit code that will allow you to open the door without a key. To get to the entrance, you need to press the "B" button, enter the apartment number and this code.
You can use the secret combination that is in every intercom Quite often there is a problem when the keys to the intercom are lost or forgotten, however, there is a way out, this is the input of a special code that was set by the manufacturer of this intercom device. All details below.
Understanding how to open an intercom
An intercom kit is necessary in order to ensure security at the entrance apartment building, since criminals usually wait for the victim in open, unprotected entrances to get into the apartment. Also, the intercom ensures order and cleanliness in the entrance, as it scares away lumpen and outcasts.
Each company producing this product, competing with other companies, strives to secure its device and develops management software that is different from others, naturally, by entering its own combinations of numbers
You need to know that entering a special pin code with mercenary intentions is punishable by law.
Modern intercoms have not only the ability to communicate, record a conversation, but also video surveillance, which gives 100% security. Many intercoms are equipped with a special code so that you can open (if you forgot or lost the key) in emergency situations (unlock), as well as a loud emergency notification system when people are evacuated from the building in case of fire, earthquake and other situations.
When using the intercom, the following instructions should be followed:
- When leaving the entrance, you must press the button under the screen and wait for the sound signal, only then exit.
- When entering the entrance, you need to lean the key-chip against the reading panel of the intercom device, when the sound signal (impulse) sounds, you can unlock the front door.
- After leaving or entering the entrance, you can not help the door close, it will close itself with the help of a hydraulic closer.
- If you push and help the door close, this can lead to damage to the door closer.
The main components of the intercom are: a company name plate, a call block, a primary power source, an independent switching unit, an independent electromagnetic lock that magnetizes a magnet to the door plate, door closer, call button, apartment blocks, keyboard.
Intercoms are divided into multi-subscriber and low-subscriber, according to technical device, multi-wire and two-wire. In the age of new technologies, there are intercoms that receive and transmit a signal using Wi-Fi, based on optical fiber.
Do not panic if you do not have the keys to the intercom with you, or it has become demagnetized, the encoding has flown off (recoding and programming is required). You can deceive any intercom using a universal key-chip, which is available to ambulance doctors, police, post office workers (postmen), house management workers, Internet communications (Rostelecom). These keys are made in the form of a special tablet, radio key fobs, two-pin key and are legally issued to employees of special services.
Method description: how to open a Metakom intercom
Domestic intercom Metacom is used for apartment buildings to protect against unwanted guests. What to do to open the intercom, is it possible at all?
Intercoms are produced by many different companies, both in Russia and around the world. Therefore, they do not have a single (universal) set of necessary numbers
The main thing is not to break the screen, but to make (restore) the lock by entering a combination.
To open a Metacom intercom without a screen, you need to dial a special combination consisting of several numbers and letters. Firstly, press the button responsible for the apartment number - B. Secondly, dial the code 5702.
If the intercom does not open, then you can try to enter the codes:
- 64434;
- 1256;
- 1256;
- 4978.
If the intercom Metacon of the MK-20M / T series, forward or Pro, then you must enter similar combinations or a pin code (B + 27, B + 5702). It takes a very long time to go through all the codes and you can either wait for someone to enter or leave the entrance, or call the neighboring apartment and say that you are a neighbor and forgot the keys. And remember that the use of all fraud with mercenary or robbery intentions is punishable by law.
Example: how to open an intercom Visit
Intercom Visit is one of the most reliable devices and is adapted to such harsh conditions as low and high temperatures, wind, rain. The body of the intercom has an anti-corrosion coating, which ensures reliability.
"VIZIT" is factory set to 12#345 or *#4230. But recently released models can be opened by entering 67#890 or *#423
The intercom of this model works in a humid climate. The average service life is about 10 years.
Intercom Visit in case of emergency can be opened with a special code, you should log in to its menu and dial #999. After 2 beeps, enter 1234. You need to wait a bit and after a short beep, dial 2#3535.
If, after entering the combination 1234, there was no short signal, but a signal similar to two-tone or others was heard, then other combinations can be entered:
- 6767;
- 3535;
- 12345;
- 11639.
After the dialed combination, you must enter 2#3535. Actual for the following models: Vizit N-100, Vizit SM-100, Vizit BVD-341, Vizit BVD -313 and others.
How to open a Cyfral intercom
Digital has many models: Digital INTEL, Digital CCD-20.40, Digital CCD-40TS, Digital CCD-2087.2TV, Digital CCD-2087.2T, Digital CCD-2087.2T R, Digital M-10MR, Digital M-10MT, Digital M-20MTV, Digital M-20MZV.
To open the Cyfral intercom, you need to have a special master key or know the password
For a Cyfral intercom of a regular model, for opening without a key, you must enter the following numbering:
- Call + 100 + 2323;
- Call + 200 + 2323;
- Call + 300 + 2323;
- Call + 400 + 2323;
- Call + 500 + 2323;
- Call + 600 + 2323;
- Call + 700 + 2323;
- Call + 800 + 2323;
- Call + 900 + 2323;
- Or choose the following combination Call + number + 2323 or 7272, 7273.
To pick up the code, it takes time, it is better to call a neighbor in the apartment. For the Cyfral M intercom, it is easy to open using the combination Call + 37 or Call + 3792. The Cyfral intercom of the CCD-2094.1M series is opened by the code Call + 0000, after which ON will appear on the display, you must enter 2.
If these operations do not work, then the factory access code was changed by the housing and communal services employees.
If you are with a tenant of this house, then you can get the access code from them if the key has been lost. The intercom of the Cyfral CCD-2094M model can be opened by dialing the combination 0000 + call, after the entered cod will appear on the display. 123456 + call, if it does not work, enter 456999 + call, or 123400 + call, after that f0 appears on the intercom display, then enter 601.
Hacking the intercom model Rainmann (Rainmann) 2000 is possible by entering the combination - key + 987654, after a double intercom signal, enter 123456, after which P appears on the display. The letter P on the display monitor indicates that you have entered the service menu, in which you can carry out control with numbers and program the code with your own hands.
Enter a single number:
- 4 - block and disable the Rainmann intercom;
- 6 - turn off Rainmann;
- 8 - open (the door is demagnetized).
Rainmann CD-2000 and AO-3000. In order to open the 2000th model, you must click on the "key", then enter the code "987654". After that, the intercom will beep and you must enter the numbers "123456". If the engineering menu is available, the “P” icon will appear on the screen. Now, to unlock and open the door - you need to press the number 8
The intercom of any DomoGuard model can be opened by entering the combination C + 669900 + call + enter a number 1 more than the number of the last apartment in the entrance. After typing combinations, F will appear on the intercom display, which will mean access to the service menu. After that, we dial the code 080 to enter a new key 2, 2, 2 into the intercom memory. To disable the door lock - 071.
Instructions: how to open the Eltis intercom
All Eltis intercom models open after entering a special combination, however, if the entered combination does not open the door, then the factory settings have been changed. Intercom Eltis (Eltis) can be opened by entering a universal code that can fool the security device.
You need to press and hold the call key for 20 seconds. For a while, a five-digit code will appear on the display of the equipment. Then this combination will disappear, so you need to remember it. This password will allow you to enter the settings menu
- Call + 973;
- Call + 7456;
- Call + 2323.
With the same combinations, in which the call button is pressed at the beginning, you can open the following types (access intercoms) - Tekhkom, Stroymaster, Marshal, Belsplat (Belsplat), Kamsan, Condor, Lock, Poly, Filman, Polylock, Smartel, Laskomex, Modus, Polis and others.
Intercom code
Intercom brand Factorial of different models can be opened without a key by entering a special access code to software– 000000 + 123456, 5 + 3453475 + call + 7 + call.
Houses equipped with intercoms are found everywhere, but not many people know how to open them without a key.
The Keyman intercom can be opened by entering - K + 100 + 789, after the signal has sounded, enter 123456. After displaying the Keyman R on the display, which allows you to enter the menu, enter 8. If the intercom has a touch screen, then in winter it can be opened by application of a snowball to the screen, hypothermia can ruin the intercom.
It is also possible to open the device using the piezoelectric element of the lighter, which is applied to the place for the key, but this does not always work and is weak.
Intercom Barrier II, 2M and 4 can be opened by pressing 2 + 4 or 2 + 7. You can also magnetize the place where the key is applied and magnetized with a magnet. In the same way, you can open the Arkades intercom with an empty plastic key.
The intercom Raikmann and Rainmann and Smartel can be opened like this:
- Key + 321654;
- After the beep, enter the numbers 123456;
- When P appears on the display, enter 8 or recode with a shocker or electric shocker, which, with its impulse, can turn off the intercom device.
The Blink intercom is the only audio intercom installed in Belarus, Ukraine, Kazakhstan and you can open it with a D9-0.1, 6F22 battery, which we put in a turnkey place. And the intercom Cron, Pirrs and Safe can be opened using the factory combination 951. The intercom pier 1000 Micro can be opened using the factory access code - 12345678 + K + 1234 or 8310649 + entrance number.
You should know: how to find out the code from the intercom
Intercom is the most reliable device to protect multi-storey buildings, garages and private houses. Residents of the building or the owner of the garage must know the password and secret codes for emergency opening of the intercom. This password is used if the intercom key has been lost or forgotten.
If at the entrance you find that there is no key to the intercom, first of all it is better to contact the neighbors
If the key to the intercom is lost and the password has been forgotten, it is not possible to open the door, then you need to call the housing and communal services, service or company, a single service center that installed this intercom device, so that the master can unlock the combination locks. Remember that unauthorized entry and hacking of the intercom at the entrance of the house in foreign territory is responsible for their actions.
Why is it not worth entering codes and physically trying to open the intercom without a key? There is an instruction where it is written that it is strictly forbidden during the operation of the intercom to cause any mechanical damage to the call unit, handset, electronics unit, electromagnetic lock, opening button and intercom body with various objects that can lead to breakage of the device or its individual elements.
Mechanical damage also includes wiping with snow, dousing with water, heating with fire, dousing with paint and other solutions, using a magnetic key with an electromagnet, tearing out buttons, repairing the device yourself or coding it.
It is forbidden to independently perform recoding, unlocking or other actions by a person who is not a service worker for the intercom device. Do not pull the door behind you, which can lead to breakage of the hydraulic closer. The closing speed of the entrance door is set by the master, depending on the structural features of the door and the adjusting screws.
How to open an intercom without a key (video)
In conclusion, it is worth noting that it is forbidden to put foreign objects under the door from the inside and outside, which prevent the door from closing independently and lead to unauthorized entry of strangers into the territory.
