How to use a broken refrigerator in the country. How to get rid of an old refrigerator? Options for using an old refrigerator in the country

Many people sooner or later ask themselves the question: "Where to put the old refrigerator?". There is nothing strange in this, household appliances, like everything that is not eternal, are periodically replaced with a new, more modern one. As a rule, old refrigerators are very large and heavy, sometimes it is not easy to even take them out of the apartment. How to deal with the old device, so as not to harm yourself and others.

Disposal of household appliances

According to the norms of the law, overall household appliances have certain disposal rules. Therefore, it is forbidden to simply take the refrigerator outside and leave it near the garbage dump. For such amateur performance, a considerable fine can be “soldered”. It is very important to adhere to existing disposal regulations.

Conscious citizens, united in HOAs, periodically order special containers for the removal of large-sized garbage to the house. Such a need for residents apartment building very relevant. Therefore, do not be too lazy to call the HOA and find out if there is such a practice of garbage collection in your home. If yes, find out the schedule on which the cars run.

In civilized settlements with a rather large population, municipal services should function, in the scope of which the issue of disposal of equipment falls.

Advice

If there is no HOA in your house, contact the housing and communal services authorities, they should tell you how to deal with the old refrigerator, without violating the law. But, as a rule, you will have to pay a lot of money for the removal of a refrigerator through the efforts of housing and communal services, save if you do not hire movers.

Important!!!

Get rid of old technology“garbage companies” can help, this service is usually paid.

Analyzing the "legitimate" ways to get rid of large-sized equipment, it is not at all strange why people are looking for other alternatives.

Store promotions

It is now a fairly common trend when large supermarkets household appliances organize campaigns “Replace old equipment with new”. Of course, everything is not quite right, it is not profitable for a store to change the old one for a new one, but when you return the old refrigerator, you can get a significant discount on the purchase of a new one. As a result, it turns out to be very profitable, so do not be lazy to sometimes pay attention to the promotions of stores on the Internet and on billboards.

ads

Scroll through local ads in newspapers, magazines, websites, there are sure to be profitable and not troublesome options for getting rid of the refrigerator. Look for the headings “Buy a refrigerator for spare parts”, “Removal of old equipment for free”, “Buy a refrigerator (pickup)”, etc. In the best scenario, you can "kill" two birds with one stone: free up useful space in the apartment and help out some money.

Advice

If the monetary benefit for you is a secondary point, which may not be, then you yourself place an ad in the newspaper with approximately the following content: “I will give the refrigerator for nothing on the terms of self-delivery.” As a rule, they react to such words very quickly, in ten minutes you will already have to answer calls.

Use with benefit

Many people are in no hurry to put up with the fact that the old refrigerator has served its purpose and try to give it new life but now in a different capacity. Such people are the owners of "golden hands", endless imagination, they have a lot of ideas in their head on how to use an old refrigerator in an unconventional way. To begin with, with your own hands or with the help of a specialist, you need to drain the freon from it, after which the refrigerator case becomes a real springboard for home craftsmen.

Few people know that from the refrigerator you can make a smokehouse for meat, as well as a dryer for vegetables and mushrooms. Some craftsmen build their cases of the refrigeration unit incubator. The refrigerator can be buried in the ground somewhere in a shady place and used as a mini-cellar.

If the old refrigerator has good thermal insulation, you can make a good country greenhouse out of it. To do this, the door is removed from the curtains, and instead they simply cover the box with transparent glass. The refrigerator cabinet in the garage often makes a great tool storage cabinet.

Smokehouse from the refrigerator

Conclusion:

The fact that the refrigerator is old is not a reason to send it to the trash, the refrigerator can be used for various useful purposes, the main thing is to have a head on your shoulders and " right hands". We have already given you a few ideas. And remember, if you want to get rid of the refrigerator completely, never throw it away in the wrong place.

There are many options for using old washing machines and refrigerators, both quite practical and decorative.

Ideas for Reusing Old Appliances

Everything breaks sometime. Washing machines and refrigerators are no exception. If your equipment has already definitely fallen into complete disrepair and cannot be repaired, do not rush to throw it in a landfill. There are many options for using old washing machines and refrigerators, both quite practical and decorative.

Flower pot from the drum of an old washing machine. It is quite nice and roomy, it is not afraid of moisture, it will last a long time, because metal is a very reliable material. You can paint such a flowerpot for plants in any color.

The whole washing machine became a flower bed, even a container for powder and rinse aid was used. Of course, such a piece of household appliances looks strange surrounded by greenery, but in general it is very interesting option, original element of landscape design.

The most popular way to use an old drum from a washing machine is a brazier. You can cook on wood and coals not only kebabs, both a pot and a frying pan will conveniently stand on top. At the same time, making such a brazier is very simple.

This is already an improved version of the barbecue from the washing drum, on a tripod. By the way, the design is quite light, it is easy to carry around the site. As an option, it was possible to equip a stationary place for an outdoor hearth by arranging a convenient platform around the drum.

And who will say that it is ugly - reflections of the flame in the holes of shiny metal. Such a brazier does not look at all like an old and useless thing, but a relevant and practical element of a personal plot.

From a very old washing machine, or rather, its rounded metal case, you can make a smokehouse for fish and meat products.

This is how the drum of a washing machine, which the designer or the owner of the house with a rich imagination has worked on, can look elegant. By the way, in the empty case of such a pedestal-seat with a soft pillow, it is quite possible to store all kinds of little things.

And again the whole flower bed washing machine. Beautiful bright petunias smoothed out the brutality of the plain metal body of the equipment, which obviously served for many years until it turned into a flower bed.

Wardrobe in an old refrigerator. The case was painted, there are few shelves, but they are quite roomy, and various little things fit in the former freezer.

Even if the refrigerator itself refused to freeze, this cannot prevent you from using it to cool drinks during an outdoor party. simple finish wooden planks looks quite attractive, and the ice under the now hinged lid will remain for a long time.

An incubator in an old refrigerator case. It will retain heat, especially if it is additionally insulated, you only need lamps for heating eggs and a thermometer to control the temperature. A good option for those who want to start breeding chickens.

House for puppies. It turned out a separate bed and dining room. For a larger dog as bed the case of the refrigerator would also fit, you just need to remove the shelves.

A chest for potatoes and other vegetables. If there is no cellar - a good place for storage. A refrigerator dug into the ground will heat up and cool slightly, less likely that the potatoes will germinate or, conversely, freeze. published

New life for an old refrigerator. How can you use the body of an old refrigerator.

The owners of refrigerators try to get rid of them in two cases: either the unit is obsolete and is replaced with a new one, or it is out of order and cannot be repaired. In the first case, the "old men" most often migrate to garden houses, garages, where they are still used for their intended purpose for a long time. In the second case, the problem of disposal arises. However, the first option only delays the prospect of the second. But zealous owners are trying to benefit from the "killed" refrigerator. What's more, it's easier to do so.

So, consider the most trivial ways to use the "old" unit.

Recall that the body of the refrigerator is made of high quality sheet metal. If you are a motorist, or just a tinkerer, cut off this metal. It will come in handy for bodywork and other work. From sheet metal, you can make a lot of useful things for a summer residence.

The inside of the refrigerator contains a lot of useful things. If the refrigerator is working, then its main unit - the compressor, will still serve. The pressure it develops is not large, a maximum of 1.5 atmospheres. But this is enough for the operation of a spray gun, airbrush and other small pneumatic tools. You can make a pond aerator, tire inflation compressor, etc. It can be equipped with a receiver from a car camera.

A radiator made of a thin copper tube will also not disappear in the hands of a craftsman. There are several meters of it. Copper is perfectly soldered. Various branch pipes, water and gas connections, instantaneous water heater or heat exchanger - these are the simplest applications of the tube.

The inside of the refrigerator is an excellent blank for shelves and "cash registers" for storing small tools. Sometimes it’s enough to carefully cut it all out and fix it on the wall of a workshop or utility block.

Another easy way to use an old unit is as a cabinet. What you store in it depends on your needs. Children's toys, cosmetics, tools, wood for the fireplace, etc. The only thing you have to take care of is the design of the locker. Here your imagination will help you. Make sure that the "locker" becomes an integral part of the interior. At the same time, the insides of the refrigerator can be left as is or removed and re-equipped everything there at your discretion.

If the body of the refrigerator is placed horizontally with the door up, you get an excellent container - a chest. It can be used for garbage storage, composting, as a flower bed, a store of dry firewood, etc. Beekeepers can adapt it to store honeycomb hive frames. The internal size of the refrigerator body perfectly matches the size of the frame. In addition, the problem of protecting wax from rodents and moths is immediately solved. The refrigerator closes almost hermetically due to the seal on the door.

From the door of the refrigerator and part of the body, you get an excellent door for a cellar or a well. It is necessary with a grinder to cut off the front of the case at the right distance in order to get a similarity door frame. The remains of the body serve as an anchor part, which is concreted or fixed in the wall. True, for such an application it is required enough high refrigerator, and they are all two-chamber. But it doesn’t matter - we connect both doors with an overlay and self-tapping screws and they become one, open together.

From the refrigerator - case

The body of the refrigerator has good thermal insulation, which allows it to be used as an isothermal case. Can fit gas cylinders pumping station to protect them from the cold. If you remove the insides and drill ventilation holes, you will get a wonderful "metal box" for large gas cylinders.

This property ( good thermal insulation) will allow you to arrange a “cellar on the balcony” from the refrigerator. Even in cold weather, it will be possible to store potatoes and other vegetables there. As a heater, it will be enough to place an electric light bulb of 40-60 W placed in tin can.

Owners of autonomous power generators are aware of their most important drawback - a high level of noise. Place the unit in the refrigerator case. Thermal insulation will become soundproofing. Don't forget to make some holes for air supply and take out the exhaust pipe. Or cut a hole on the side and pick it up with a fine mesh.

The case of a small refrigerator can be used to install an electric or gas meter outside the home. You can install the refrigerator body on the head of a water well. In the refrigerator, you can arrange a mini-hozblok and store garden tools there. Large - directly in the case. And for small ones - make holders on the door.

From the refrigerator - smokehouse

You will need a potbelly stove and a refrigerator case. Remove all the "insides" from the refrigerator. We install the potbelly stove inside the case. The greatest difficulty is the output of the pipe. Draw a circle on the top panel of the case, with a diameter slightly smaller than the pipe. Then make more holes along the contour with a drill with a diameter of 4-5 mm. Next, let's start the file.

In the upper part of the box, at a distance of 20 cm, we install two corners, on them - a grid shelf for smoked products. We use the shelf from the same refrigerator. 10 cm below, we install two more corners, on which we install a tray to collect fat, which will drip from the products. Next to the shelf for products, we install a bimetallic thermometer from gas stove indicator out.

Such a smokehouse has many advantages. You can heat it with anything - all the same, smoke flies out the chimney. Smoke for smoking is obtained from what lies on top of the stove and smolders. Using the oven allows you to get different smoking modes. The disadvantage is the small volume. However, for personal needs it is quite enough.

However, it is not necessary to install the oven directly into the refrigerator. If its bottom is flat (and it is most likely flat), it is enough to install the refrigerator itself on the stove - potbelly stove (also with a flat top or no top at all). Or make an oven old barrel, punching holes in it for air to enter the combustion zone and smoke to escape. Then the sawdust at the bottom of the refrigerator will smolder perfectly.

You can also install an electric heating element (“air”, for example, for an oven) in the refrigerator. It heats up to red, and this temperature is quite enough for smoldering sawdust and shavings. By the way, an electric heating element will allow you to get products not only hot, but also semi-hot and cold smoked. The sawdust smolders, but the temperature in the refrigerator remains low. The heating element can be equipped with a switch-on regulator that will automatically maintain the desired temperature.

From fridge to dryer

According to a similar scheme, you can make a dryer for fruits, berries and mushrooms. In the lower part we install a heater - either electric or the same potbelly stove. It is advisable to install a fan as well. Shelves can be made from plywood or metal mesh. In the roof of the refrigerator or in the side wall (so that rainwater does not get inside) we make an outlet 100 x 100 mm and close it with a fine mesh so that the flies do not fly in. Such a dryer will dry a bucket of apples a day. Or any other fruit.

As you can see, an old refrigerator is a very valuable thing in a summer cottage. If you or your friends have one gathering dust on the balcony or standing idle in the country - use our advice. You will not regret!

Did you like it? Then:

Pumping water with a compressor from under the refrigerator

A little intro.

The other day I was fixing the old plumbing in the house. It was necessary to slightly bend the vertical pipe going from the ground to the house. In order to heat it to a suitable temperature, it was necessary to drain all the water from it. Since when installing the water supply system in the house, the drainage of water from the system was not provided, for this it was necessary to turn off the tap in one shaft (general), then unwind the connections in the other (mine) and thus already drain the water. I had no desire to break connections that had not been touched for a couple of decades and were reliably overgrown with rust and everything that was possible. I had to come up with Alternative option without any destruction. That's how the idea to make a small pump was born. Now directly about the design.

It took me about 10 minutes to assemble the system. It presents absolutely no difficulty. The whole construction can be easily understood by looking at the drawing.

But just to be clear, let me explain. The most main part systems - this, of course, is a compressor from under an old refrigerator. I've been using it to inflate car tires for a long time. In this case, no re-equipment of the compressor itself is required (it is enough to install a standard start-up relay). On the compressor itself, as a rule, there are three tubes: one filling (it is sealed), one discharge and one suction. This is the last one that we need.

Next, we take any glass bottle (I used from champagne), in the cork we make two holes for the tubes. You can also use any tubes, the main thing is that their diameter allows you to stick both tubes into the cork. It is desirable to seal the place where the tubes enter the cork with some kind of sealant, or at least ordinary plasticine. The bottle can be replaced by any vessel that can be hermetically sealed, but it is better to use vessels that are not amenable to deformation, otherwise under the action atmospheric pressure when air is pumped out, the vessel will flatten. Next, with the help of a hose, we connect one tube to the suction outlet of the compressor, and on the other we put a long hose, the other end of which is lowered into a tank of water.

Everything, a homemade pump is ready!

One feature - the lower edge of the tube coming from the compressor, it is better to place a few centimeters above the lower edge of the tube coming from the tank. This is necessary so that the water flowing into the bottle is not accidentally sucked into the suction tube into the compressor. This, of course, is unlikely, since the power of such a compressor is small, but still, it is better to play it safe.

The performance of such a pump is rather weak and, of course, it is not suitable for serious purposes. But for small amounts of liquid, it justifies itself, especially since the cost of it is scanty. Water pumps slowly but steadily. The main thing is not to forget to empty the tank in time so that water does not get into the compressor.

In my case, I pumped water out of the pipe in half a minute. Almost a full bottle leaked.

This system can be improved by using a more capacious vessel instead of a bottle (in this case, it will take longer to wait for the necessary vacuum until the water is pumped out). And even better, make an automatic drain of water, so as not to empty the vessel manually. But this is a completely different topic. The purpose of this article was to talk about a small pump from improvised materials in 10 minutes. And it has been achieved. Good luck to you!

Did you like it? Then:

How to make a smokehouse from an old refrigerator.

How to make a smokehouse from an old refrigerator .

The old Oka refrigerator, or some other, having honestly served for almost eleven years, ordered to live long. His body is large, solid - it's a pity to throw it away, you can give it a second life.

Carefully remove all unnecessary bells and whistles, leaving only a metal box with a door. After removing the inner chamber with thermal insulation, it turns out that the welds inside the case are smeared with some kind of brown sealant, which takes a good two hours to scrape off. On the back side, where the heat exchanger was, a decent hole is formed. It is necessary to close up with a metal plate cut from the dismantled parts.

The potbelly stove, welded from a piece of a four hundred water pipe, and not used for its intended purpose for a long time, fit very well into the prepared refrigerator case.

With the outlet for the pipe, you have to tinker a little. First, draw a circle with a compass, with a diameter slightly smaller than the diameter of the pipe. Then drill holes around the entire perimeter of the circle with a five-bit drill. And bring it to the desired size with a semicircular file or in some other way, as you like.

About twenty centimeters from the top of the box, install two corners - holders for the grid-shelf, where the smoked products will be located. Ten centimeters lower, fix two more corners for the pallet, where the fat will drip. The shelf can be used from the same refrigerator, and the tray from the oven of the old gas two-burner stove. From the stove, take another thermometer with a bimetallic spiral plate. To measure the temperature in the immediate vicinity of the product. Drill a hole of the required size on the side wall and fix the thermometer, with the indicator facing out.

To fix the door, you can use an ordinary hook.

When the whole structure is ready, it is necessary to properly ignite the chamber to eliminate odors. To heat the stove for three hours, constantly throwing up firewood, with the door slightly open. The enamel on the refrigerator body will turn a little yellow in places, but will remain in place. different breeds wood, work out the technology so to speak.

The main advantage of the described unit, perhaps, is that for smoking there is a minimum amount of material to create smoke. After all, smoke is obtained only from what lies on the stove and smolders, and you can heat the stove itself with anything (it will fly out into the chimney) to maintain temperature regime.

Well, the disadvantage is that there is not enough space for placing products. However, if you smoke only meat and lard, and only for yourself, then it’s quite enough!

Fridge - the unit is not cheap, so if something goes wrong, we try our best to revive it. But if neither the call of the master helped, and the age of the refrigerator advises sending it to retirement, you can give the old appliance a new life!

To do this, just throw away everything unnecessary and add some details. And then you can already use it for those purposes that are now for you The most important. Improving the cottage or updating the interior - it's up to you!

What to do with an old refrigerator

1. Even if your refrigerator does not cool food, this does not mean that nothing else can be stored in it. Repair tools or gaming accessories - choose what you are passionate about.
2. A simple cellar for vegetables grown in your own country house. Every fruit has its place!

   

3. Attach glass instead of a door, and you will get a simple greenhouse. Moisture and heat will remain safe and sound, and you will get early vegetables and herbs from your garden!

   

4. New home for a four-legged friend. Yes, and several rooms!

   

5. Even if the refrigerator can no longer cope with its main function with the help of coolant and electricity, it can still be used for its intended purpose. Pour ice into it and you can safely arrange a summer party with cold drinks!

   

6. Creative closet for lovers unusual furniture. Everything is in its place!

   

7. If everything else can still be understood, then this Altaian has gone even further. A real snowmobile with speeds up to 30 km/h!

   

8. Budget country cellar. You just need to try and bring ventilation to the street.

   

9. Unusual stalls for fairs. Books, handmade, other exclusive goods - such things will look good on creative shelves.

   

10. The old doll house has become small? Here's how to solve this problem!

    

11. Boxes for seedlings or borders for flower beds - all this can be done from an old refrigerator. You can try and decorate it to your liking!

    

12. Designers went even further and offered their vision of this device in the interior. Introducing the Sofa Refrigerator and computer desk with a chair from the same device!

    

Now you will definitely not throw away the old Dnepr or Oka. Give these ideas a try and be sure to tell your friends about them!