How to make a phone stand at home. Do-it-yourself stand - how original home-made coasters and stops are made (90 photos) How to make a phone stand from a credit card

Big and warm hello to all! For a long time I did not write in the "DIY" section. Regular readers probably forgot that such a thing exists. But oh well, I'll fix it today. And I will share with you very cool ideas on how to make a phone stand with your own hands.

Recently I have been reading a lot, studying information, watching videos. But holding the phone in your hands is not very convenient. And it happens that, for example, I cook food, cut food, and the phone has to be propped up with whatever comes to hand. And suddenly an idea came to my mind, why not buy a stand in the store, which will greatly facilitate my life. Having searched on the Internet, having found the answer to the question of what it costs and for what, I came across a photo that depicted the same thing, but made in seconds and with my own hands. Then the thought lit up in my head, to put together a few inspiring ideas. And as a result, an interesting post was born, I hope. So, let's begin!

I propose to start with the very best option for a paper phone stand. You can build it anytime and anywhere, the main thing is to have a sheet of paper about A4 size on hand. I think this idea will appeal to students and schoolchildren. The main principle here is to take a sheet of paper, preferably thick, folded lengthwise to get at least 3 layers, but of course everything depends on the width. Then again it is necessary to fold the paper, making folds across so that 3 wide edges of the same width and one small one are formed. Look at the photo, it clearly shows what should happen in the end. And the last step is to make two small folds.

I can’t even imagine who can keep such a rarity as a box from under tape cassettes for a tape recorder. But it turns out that such an object, which would seem to be completely useless, can be used. In a couple of seconds, turning it over in a certain way (see photo), you will get a very cool smartphone stand. Moreover, if you paint it with paint from a bottle, then few people will guess what it is made of.

If you have several manufacturers from the designer lying around at home, then it is quite possible to build a structure in order to keep your phone in a horizontal position. And this is done in a matter of minutes. And it is also easy to disassemble it, putting it back in place.

A plastic card as a phone stand? The idea is bold, but very real. You just need a couple of cards and strong scissors. Cut the details as shown in the photo and enjoy watching videos, photos and reading e-books.

The next way to make your life easier is to stock up on six pencils and four rubber bands. In fact, you need to make a three-dimensional figure, as shown in the figure. Start with a simple triangle, then add one edge at a time, holding it all together with rubber bands. Get the original supply for the phone.

Having a couple of wooden cuts in the house, it’s really possible to make an interesting and original, and most importantly, durable device for smartphones. You can glue the parts with hot or universal polymer glue. Indeed, such a design will serve you for a very long time.

And here are some more life hacks for the phone, allowing you to maintain them while charging. Such devices are needed mainly when there is simply no place to put the gadget, if there is no table or cabinet nearby. These holders are made from plastic bottle, as in the first case, or from thick cardboard, as in the second.

How many toilet paper roll ideas I've seen, but this one! You will need the sleeve itself and 4 paper buttons (to be honest, I don’t know what they are called correctly). Attach them as legs, cut a hole in the top to fit your phone, and enjoy the result. Of course, it is better to decorate such a stand with something or just paint it.

As you already understood, making a paper phone stand is the easiest option. So, you will need a piece of very thick cardboard. If there is none, then make it from several layers, gluing to each other. Cut holes in the part as shown. Moreover, such a holder is suitable not only for smartphones, but also for tablets.

Well, the very last of the ways I suggested to make a do-it-yourself phone stand is to use a clerical clip. I'm sure everyone has it, and if not, then it's not very expensive in stores. Take a couple of such devices, bend one rounded part of the paper clip inward. It will serve as a barrier for the phone so that it does not roll off. Nest one binder inside another. Place the smartphone so that it rests on one ear, and the second one is bent from the side of the screen. Here's a simple holder for you!

That's all for today, I hope you liked the ideas and got inspired to make one of the presented gizmos! See you soon!

A mobile phone is a thing that should always be at hand. per century information technologies it's hard to argue with that. Sitting behind the wheel, cooking in the kitchen, doing needlework or doing other things when your hands are not free, a homemade and original phone stand will become a necessary accessory.

It is simply impossible to imagine a modern person without a smartphone or telephone.

By material

To know how to do convenient stand for the phone, find out what material is used to make it.

Often, the owner, who wants to have a phone always at hand, wants to place it convenient way.

• Metal. The metal accessory will be durable and will last a long time. The cost of such a thing will be higher in comparison with the rest, made from more budgetary material.
• Tree. popular and available material. Bamboo, ash is a common type of wood that is used to make holders.
• Ceramics. These holders look elegant, but, unfortunately, are very fragile. Masters working with this material make coasters in the form of animals, shoes, hearts, geometric shapes.
• Textile. More children's version when the phone is placed on a small, custom-made pillow or soft toy. This type of phone stand can be made by hand.
• Plastic. A versatile material that allows you to choose the color and shape.
• Paper. With your own hands from paper, you can very simply build a stand for the phone. This is a practical, lightweight option when no other alternative is available.

Modern smartphones have learned to do many different things, successfully replacing our clock, voice recorder, navigator, player and even a mobile cinema.

By style

Note! When choosing a stand style, take into account not only your individual preferences, but also the design features of the room in which it will stand.

Before ordering or creating a DIY phone stand, decide on a style.

• Vintage. A variant made in the form of an old thing made of wood, metal, leather or ceramics, with a design for fixing the gadget.
• Minimalism. Plastic and paper are the main materials of this style. An excellent choice for those who are not interested in extra details.
• Classic. Option for conservatives. Mostly the manufacture of holders in this style of wood, metal.
• High tech. Modern style, without additional decorative elements. The material used is plastic.

The stand is useful and handy thing at home.

By appointment

On the table.

The main thing is the strength of the structure.

1. Adhesive based. Products in the form of a circle, one side is glued to the phone, imitating a support, which makes it possible to put the phone at an angle of 45 degrees.
2. On a stand. Fixes a device of any size. It consists of a bottom plate, which is installed on the table and a clamp, in which the gadget is placed.

Universal.

If you are a creative person, then you will find the makings of a phone stand in any item.

1. There is an option when the bottom side of the holder has a mount that can be attached to a table or any other surface. The base of such a device is usually flexible and rotates 360 degrees.
2. The second popular option: in the form of a flexible tripod that can take absolutely any shape. This type can be used: on a walk, in bed, while washing dishes, in a car - absolutely in any convenient place.

A desktop phone stand for the home should not only be comfortable, but also durable, stylish and fit well into the interior of the home.

In auto.

It is very convenient to purchase a magnetic holder for the car.

Installation principle: one side is attached to the device with a magnet, and the other to any accessible place in the car.

Phone stand made of unusual and improvised materials

Stationery binders

The device is strong enough and able to hold the phone.

If suddenly in the office it was necessary to fix the phone in a vertical position: here's how to quickly make a phone stand from improvised materials with your own hands. The binder consists of two parts, a colored clip made of plastic or metal and a steel-colored paper clip. We take two binders and fasten them together. We put forward one paper clip in the direction of the phone.

Using pencils

Try making a phone stand out of pencils.

Materials needed: 6 pencils and 4 rubber bands. We assemble a three-dimensional triangle: a tetrahedron. We fasten the ends of two pencils together and put the third one between them.

Important! To build a design, you need to take pencils with rubber bands at the ends to avoid unnecessary slipping.

bottle models

To make a model from bottles, prepare the material: any bottle from a cleaning agent, dishwashing liquid or shampoo, scissors.

Bottom line: the work should resemble a pocket.

Important! The size of the bottle should be at least twice the length of the phone.

Cut off the neck of the bottle and the front wall to the middle. This stand will be relevant for use while recharging. To do this, make a hole in the upper back of the container for charger. Fold the phone inward, and insert the charge first into the hole, then into the socket.

Such a model can be painted, decorated with paper or cloth.

paper clips

The staple option will require minimal cost and time.

The paper clip must be straightened into a straight line. We bend both edges of the paper clip upwards, retreating 1 cm. Then we retreat 4 cm from both sides, this part of the structure should fit snugly against the table, like a support. The next step is to bend the paperclip in the middle up so that the previous bent parts remain even, perpendicular to the table.

From a credit card

Set the resulting zigzag on the table, the work is ready.

Place an old, unnecessary credit card in front of you in an upright position. Step back from the edge 1 cm and bend the edge towards you. Divide the rest in half, bend, but in the opposite direction.

From Lego constructor

Take a wide plate - the basis of the children's designer.

It is necessary to fix several bricks from the designer on the plate, in order to support the back panel of the phone, the angle at which it will be fixed will depend on the height of the wall. To fix the device on the sides, take a few more identical bricks and fix them on the base.

From a cassette case

We insert a mobile device into the pocket where the cassette was once stored.

If you have an old cassette cassette left at home, it is very easy to create a holding structure: open it as far back as possible so that the part with the cassette pocket remains in front, and the cassette cassette top cover is placed on the table.

DIY phone stand made of paper and cardboard

Attention! Before you make an origami paper phone stand with your own hands, find and prepare the patterns you like.

You can make a small phone stand with your own hands from the simplest materials.

• Folding cardboard stand. You can make a phone stand out of thick cardboard. Take a sheet of cardboard and cut out a figure: 10 by 20 cm. Fold it in half. Step back from the 2 cm fold and at a 45 degree angle cut the cardboard with scissors, not reaching the edge of 2.5 cm. Then change the angle at which you cut, it should be perpendicular to the bottom edge, cut another 1.5 cm in this position, lower the corner of the scissors 45 degrees and cut 1.5 cm down and then again perpendicular to the bottom edge, to the end.

Homemade cardboard smartphone stand.

• Cardboard triangle. Before you make a simple cardboard phone stand, prepare the materials: a strip of cardboard, pushpins, glue or tape. Take a strip of cardboard and fold it into a triangle. Fix the edges with glue, tape or buttons.

In 5 seconds, you can make a solid and strong stand for your phone.

• From a bushing. An excellent do-it-yourself phone stand made of cardboard will come out from the remaining paper towel sleeve. The wide sleeve must be cut in half. In the resulting part, cut a horizontal hole where the phone will fit. From the buttons you need to make legs so that the stand can be placed on the table.

Here's how to quickly and easily make a functional do-it-yourself phone stand out of cardboard.

• Origami. A good paper phone stand will come out of a regular A4 sheet. There are several schemes by which you can fold an excellent support for the device. Knowing how to make a paper phone stand, you can always fold it in a few minutes and enjoy it.

Origami paper phone stand.

DIY phone stand made of wood

We take wooden beam and make a blank out of it, aligning and processing the edges. Attach the gadget and cut it to size. Corners must be rounded and sanded. Having made the markup for the grooves, cut them out. Take a chisel and carefully clean the cut grooves. Sand the work again before oiling.

Homemade and original stand is ready.

DIY phone stand made of wire

Using ordinary wire, by twisting the most different ways according to the schemes, you can create an original holder for a mobile. The main thing is that the weight of the device is evenly distributed on the homemade holder.

The advantage of this DIY phone stand is that you can place your phone on it both horizontally and vertically.

Everyone knows why and when you need a phone stand, knowing quick ways its creation from improvised means, you can always comfortably watch a movie or do household chores and communicate with friends via video link.

Also, this stand can be used as a holder for tablets and e-books.

VIDEO: How to make a phone stand.

50 variants of original phone stands:

How often, being at home, in the office or on the road, we cannot remember where we put our phone. To prevent this from happening, you should get comfortable and ergonomic stands that you can make yourself. A phone stand can be made with your own hands from the most unexpected materials at hand. How to do this, our step by step wizard Class.

How to make a do-it-yourself phone stand: options for office and car

Whether at work or in the car, we all need to always be in touch. At the same time, you don’t want to spend a lot of money on expensive coasters, because they can be made from waste and outdated materials.

Card holder.

The simplest option for a phone holder is a card holder. To make it, you need to carefully bend the unnecessary plastic card in two places, as shown in the photo below, preventing it from breaking.

Experience shows that the stand plastic card is very reliable and withstands even air travel at the time of strong turbulence.

Stationery clip stand.

To make a phone stand from stationery clips or from binders, as they are also called, you will need one large and one small clip. The legs of the small clamp should be placed between the holding part of the large clamp and put the resulting design on the table so that the clamp bigger size rested on its surface.

Similar coasters can be made in five minutes from clothespins.

Paper clips make a great car stand option. To make it, you need to disassemble the large clamp and slightly bend the metal parts, as shown in the photo below.

In order not to damage the surface of the phone metal mounts It is recommended to wrap with threads in several layers. We return the holders to their place, additionally fix them with adhesive tape and clerical gum. We fix the clamp on the ventilation shutters. The phone is securely fastened between the metal parts of the binder.

Paper stand.

Ordinary office paper, folded in a certain way, can even support the weight of a large smartphone. To make a stand out of paper, you need to measure the dimensions of the phone and adjust the pattern below for them.

Cut out the piece from paper, fold it along the dotted lines and insert the side pieces into the slots. This design is good because it allows you to charge your phone without removing it from the stand.

We study popular options for coasters for home comfort

A desktop phone stand for the home should not only be comfortable, but also durable, stylish and fit well into the interior of the home. Consider options for such products.

Stand made of newspaper tubes.

A phone stand made of newspaper tubes will be a wonderful gift and a great decoration for any interior.

To weave such a stand, you will need several pre-painted long newspaper tubes, scissors, knitting needles, a little glue and varnish.

We place six blanks parallel to each other at a distance of about 1-1.5 cm and firmly fix them in the machine or in any convenient way. We lay knitting needles or wire in the extreme racks to make it more convenient to form even and neat contours of the product. We begin to braid the base with a working tube using the “rope” technique or chintz weaving. We monitor the parallelism of the rows and, if necessary, coat them with glue for better fixation.

Weave a rectangular blank of the required length. We take out the knitting needles or wire. The ends of the stands are neatly trimmed and trimmed. We give the workpiece the necessary curved shape, if necessary, wetting it a little with water.

Similarly, weave the leg of the stand on a smaller number of tubes. We bend the finished leg, install it on the main part and fix its racks between the rows of the stand. Cut off the excess and hide it. We coat the product with glue, if desired, additionally paint and cover with 1-2 layers of varnish. After complete drying, the stand can be used for its intended purpose.

Stand made of origami modules.

Modular origami is a fairly young, but very popular type of needlework. With it, you can make a lot of unusual and original gizmos, including a phone stand from modules.

To make the stand, you will need double-sided paper in blue and Pink colour. We cut the sheets into blanks and fold the modules.

We start weaving from the base of the stand. For it, you will need 28 blue modules, which must be connected to each other and closed in a ring. We make three more rows in the same way. From the fifth row, we reduce the number of modules by 1, 2, 3, 4 pieces. In the seventh row we put one pink module in the middle.

In the eighth row we put 6 modules, make a pass, another 10 modules, a pass, 6 modules. The number of pink modules is 2 pieces. On the next row pink area put three pink modules. We begin to make out the curly edging of the stand, as shown in the photo below.

In the back, we form a pattern in the form of a heart, above which we install a number of modules blue color. Gradually narrow the stand until a triangular wedge forms in its back.

Stand of modules is ready!

Video on the topic of the article

We suggest watching the video tutorials below on making other options for phone stands.

When there are cute cozy little things in the house, it helps to create an atmosphere of warmth. Making something interesting and useful at the same time is not so difficult. Today, almost everyone has a mobile phone. When we return home, we most often put it on the table. It happens that we do not notice and throw paper or other things on top, and sometimes we completely lose it on the desktop. A do-it-yourself phone stand solves two problems at once: you can always make room for your phone and design it yourself.

How to make a phone stand?

Surely you have at least one cardboard box at home. From such waste material you can create something unique. We suggest making a phone stand out of paper and an old box.

1. For work, you need to prepare stationery glue, a pencil with a ruler, a knife.

2. Before you make a phone stand, you need to prepare the cardboard. We cut rectangles measuring 10x20cm. We need 9 of these blanks.

3. Now you need to glue them three by one.

4. On two we draw such a detail. This will be the sidewall of the do-it-yourself phone stand.

5. Cut out. In order for everything to be beautiful and the structure not to lose its stability, you need to lay the sidewalls one on top of the other and check how much they are the same.

6. We take a clerical knife and cut a hole in the form of a rectangle.

7. Next, you need to make the base for the stand for the phone with your own hands. We measure the width of the phone and cut out the stand from the third blank according to the size. The phone's width is the length of our rectangle. The width of the rectangle should be such that it can fit into the grooves on the sidewalls.

8. We assemble the structure. You will also need a small circle of cardboard, its diameter is slightly smaller than the distance between the sidewalls. (photo 8)

9. All blanks must be pasted over with paper. It can be newspaper clipping or scrapbooking paper.
10. To make the back, take two pencils or something similar. We make holes in the sidewalls and insert them there. On the axis we put our circle of cardboard.
11. Do-it-yourself mobile stand is ready!

Another do-it-yourself phone stand option

You can make a simpler version of such a cardboard stand.

In our progressive time it is difficult to meet a person who does not have a mobile phone. Even sending a child to first grade, parents provide him with the necessary means of communication. We use modern mobile devices not only for communication, but also for gaming applications, typing, reading, watching videos and much more. Often, the owner, who wants to have a phone always at hand, wants to arrange it in a convenient way. The stores offer various expensive holders, but from our article you will find out what you can do

Stationery binders

Surely those who study or work in the office will have several stationery clips called binders on their desktop. Next, let's look at how to make a phone stand from these devices. To create a strong holder, you can use 1, 2, 3 or even more binders. Some craftsmen assemble three-dimensional structures from a variety of different size clip. But such coasters look bulky, and they are inconvenient for temporary use. It is enough to fasten two binders together and do not forget to bend one metal end of the holder slightly towards the phone located on it. Even one piece with a folded lug will be enough to support the mobile device.

From the same binders, you can build another structure by placing the clamps opposite each other so that the ears look to the sides. The phone is inserted into these ends, as if into grooves. To keep the clips stable, clamp a small piece of cardboard on both sides.

Using pencils

If there are no binders at hand, the question may arise: how to make a phone stand out of pencils. Before building this design, prepare 4 rubber bands and 6 pencils. In fact, you need to collect a volumetric geometric figure- tetrahedron. The principle is that it is necessary to fasten two pencils with an elastic band, and stick the third between the turns. It is advised to use pencils with an elastic at the end to prevent slipping on the table and a stronger grip on the phone.

bottle models

IN household we use a variety of cleaning and detergents. Most of them are contained in plastic container. It can be used as a mobile device holder. And how to make a phone stand out of a bottle, we will consider further.

The type of fixture will depend on the shape of the container. It can be a container for shampoo, shower gel, cleanser and more. Take a bottle twice as long as your phone. Cut off the neck and part of the container on one side approximately to the middle. All sizes are relative - measure at your discretion. On the opposite area of ​​the bottle, cut a hole corresponding to the parameters of the charger. You should end up with a piece that looks like a handbag or a pocket with a handle. Put the phone in the stand and connect the adapter to the network through the hole. Your mobile communication device will not lie on the floor, and the risk of crushing it will disappear. You learned another way - how to make a phone stand. If desired, this holder can be painted, pasted over with beautiful paper or cloth.

paper clips

The simplest and affordable option coasters are an ordinary metal clip. It must be unfolded into a straight line and folded as shown in the diagram. The resulting product is quite strong and stable. This design perfectly holds the mobile phone without interfering with watching the video at all.

Cardboard and plastic cards

How to make a cardboard phone stand? You will need a cardboard sheet from which you will need to cut a strip measuring 10 x 20 cm. Then you need to fold it in half along the short sections. Next, draw a shape as shown in the photo below. The fold line must remain intact. Opening the detail, you will see that you have a comfortable and stable phone stand.

If you have an unnecessary card lying around (any discount card), it will also make an excellent phone stand. To make such a device at home is very simple. Step back from the edge of the card 1 cm and bend the part along the short side. Bend the rest of the card in half in the opposite direction. You will get a zigzag shape. Place the phone on the formed ledge. The stand is ready.

Unusual coasters from simple things

Savvy people began to use ordinary glasses as a phone holder. They only need to be turned upside down, which, in turn, must be crossed. The mobile device is located between the bezel and the temples that hold the phone.

How to make a phone stand from a children's designer? In this case, it all depends on your creativity and imagination. To create such a model, you need to use a platform and some bricks various shapes. The stand made of parts can hold the phone both vertically and horizontally. The tilt of the screen can be adjusted by adding or removing additional bricks.

Another one interesting detail, which will help keep the phone upright - the old cassette. It must be opened and the lid folded back, thereby turning the box inside out. In the hole that once served as a pocket for an audio cassette, you can put your communication device. The convenience of the stand is that it is quite durable and transparent, does not interfere with the use of the phone. In addition, it can be easily washed.

As you can see, from the simplest items that can be found in every home, you can make such useful thing like a phone stand.