Secrets of caring for a wooden door: we extend the service life. How and how to clean dried stains from doors after repair How to clean a door in contaminated places

Beauty and comfort indoors and out depends not only on the interior, but also on the cleanliness of the doors. Every housewife should know how to wash the doors correctly.

What to pay attention to

Doors are different: interior, entrance, made of various materials, so you should pay attention to the following main points:

• If the door is designed monolithic construction, then dust and dirt on it are less noticeable. If there are decorative elements in the form of glass, metal or plastic inserts, then the problem of dirt becomes noticeable not only upon close inspection.
• The color of the door is also important, since on light surfaces fingerprints and other stains are more noticeable than on a dark canvas, and they have to be washed more often.
• Eco-veneer products are less practical, as any contamination on them is very noticeable.

In order not to have to spend a lot of time washing the doors, it is important to provide them with the right care:

• Not only the door itself needs care, but also the fittings. They need to be cleaned periodically so that the mechanism lasts long enough. If a creak is heard, you need to lubricate the fittings.
• If the door is made of natural solid wood, then first of all it is necessary to ensure a comfortable indoor climate so that the door does not lose its attractiveness and works properly. The maximum temperature in the room is 25 degrees, the humidity should not rise above 70%.
• It is necessary to carefully operate the doors, as scratches, dents and other troubles cannot be hidden.
• If you find dirt and stains of fresh origin on the door, then you should not be lazy, it is enough to immediately eliminate the trouble so that after that you do not have to deal with stubborn pollution with the help of various means.
• If you started a repair, then be sure to cover the interior and entrance doors polyethylene. This measure will allow you to get rid of unnecessary work.

Among the materials used for the manufacture of doors, the following are popular: PVC, eco-veneer, laminated options, natural veneer, solid wood. Every material needs proper washing.

The detergent is selected depending on the base material of the product. Today you can buy universal detergents for various surfaces.

Washing wooden doors

Products made of natural wood can react negatively to prolonged and abundant exposure to moisture, so it is recommended to use the dry cleaning method or wipe them with a damp cloth.

To wash a wooden door, you will need to follow a number of simple steps:

1. Dial into prepared dishes required amount warm water, add to it detergent. You can use shampoo or dishwashing detergent.
2. Be sure to wear rubber gloves so as not to harm the skin of your hands.
3. With a damp cloth, treat the surface of the product on both sides.
4. Rinse with clean water, wipe the product with a napkin.
5. Let dry and apply polish. This measure will protect the product from contamination.
6. Wipe the handles thoroughly so that there are no greasy stains on them.

If stains remain on the door, then you can remove them with ordinary talcum powder. Pour a small amount on problem area, leave in this position for 20-30 minutes, then remove with a soft brush.

This method of washing is also suitable for products made of natural veneer.

How to clean a laminated door

Even a beginner will be able to wash the laminated surface, as the material is resistant to moisture and detergents. Dishwashing gel can be used, alcohol and water can be used. It is important to avoid the use of hard sponges.

1. Pour warm water into a basin or bucket, take a soft, lint-free cloth and proceed to remove dirt. It is important to process the fittings with a brush.
2. Rinse the product, then dry thoroughly with a towel or a special cloth until dry.
3. After polishing.

How to clean a metal door

Metal doors are usually used as entrance structures. These doors have to be washed less frequently than interior doors, as they are less likely to get dirty.

To wash a metal door, it is enough to follow simple recommendations:

1. Take warm water in a suitable bowl.
2. Add detergent. It must be liquid, as abrasive particles will damage the surface. You can use a classic soap solution.
3. Using a sponge or cloth, thoroughly rinse the door and fittings, rinse and wipe to dryness.
4. Do not use coarse brushes.

How to clean a glass door

When cleaning tempered glass doors, follow these tips:

• If the product has complex types of dirt, it is recommended to use alcohol, acetone or nail polish remover to remove them.
• You can clean frosted glass with a soft brush.
• Get rid of stains frosted glass dishwashing liquid will help.
• The ideal choice of cloth for cleaning is a cloth made of microfiber, as it does not leave streaks and does not harm the surface of the products.
• To keep the door clean for as long as possible appearance It is recommended to clean the handles regularly.
• For impeccable care, it is recommended to use a disinfectant for the treatment of door handles.

Sequencing:

1. In the prepared dishes, take water at room temperature, you can drop a little into it ammonia.
2. Thoroughly clean the surface with a soft cloth.
3. Rinse it with clean water, wipe dry.
4. If there are metal elements on the glass door, then they must be washed with a soapy solution.

Ways to wash interior and exterior doors.

The front door is the face of the mistress of the house. Very often, the state of the door can be used to judge the well-being of the family. After all, the more reliable the door, the higher the likelihood that there is something to hide behind it. Due to constant use, the gates often get dirty, so you need to know how to clean them.

With a metal door, everything is simply washed off. Abrasives can be used, but there is a risk of scratches.

Stain removers:

• Mister Muscle. The tool must be purchased universal. It is applied with a sprayer and removed with a cloth.
• Dishwashing liquid. Just dampen the sponge and apply a little. Rub the door and wash off the foam with a damp cloth.
• Silit. The same tool is sold in a spray. Apply to the door and simply wipe it with a cloth.

A wooden door, unlike a metal one, can get wet. In addition, often the coating is not very durable and can be destroyed under the influence of moisture and aggressive substances. That is why dirt is wiped off with a damp cloth. If it's fingerprints, then perfect option to remove such contaminants - polish. This polish is Pronto, Weasel, Sana.

In this case, it is best to use glass cleaners. They contain ammonia and alcohol in their composition. This allows you to dissolve grease and remove dirty stains.

Funds overview:

• Mister Muscle
• Blink

Most often, these doors are made of wood or plastic. In these cases, strong solvents must not be used until the stains are removed. Usually gentle agents are used.

Stain removal methods and products:

• Vinegar and soda. It is necessary to dissolve 20 g in 1000 ml of warm water baking soda and 15 g of washing powder. Next, 50 ml of vinegar is introduced. A sponge is wetted in the solution and dirt is removed.
• Lemon acid. Dissolve a spoonful of dishwashing detergent and 20 g of citric acid in 500 ml of warm water. Wash the doors with liquid.
• Ammonia. 10 ml of the product must be dissolved in 500 ml of water and the contaminated surface washed with liquid.

Lacquer can be easily damaged. That is why you should not use solvents and abrasive powders to remove stains. All this will ruin the coating. It is better to wipe the door with a polish. Apply a little to the cloth and wipe the surface.

If these are fingerprints, then you can remove them from the plastic with ammonia. A glass cleaner with ammonia is also suitable.

Options:

• Domestos
• Silit
• Dishwashing liquid
• baking soda solution

The point is not to wash out the remaining urine, but to dissolve it. Otherwise, the cat will still mark the territory.

Cleaning products:

• Lemon. Dilute lemon juice with water in a ratio of 1:1 and wipe the doors with liquid. Before doing this, wash everything with soap.
• Vinegar. Wash the stain first with soapy water and then with a 1:1 solution of vinegar.
• Iodine. Dissolve 3 drops of iodine in a glass of water and rub the cat's marks with it.

There are several options for washing whitewash. You can use Mr. Proper, which does not leave streaks. But folk methods are cheaper.

Review folk methods to remove whitewash:

• Vegetable oil. Dissolve 50 liters of vegetable oil in a bucket of warm water and wash the floor with liquid.
• Vinegar. Pour 20 ml of vinegar into a bucket of water and wash the floor with liquid.

The primer after drying strongly eats into the surface. That is why you can use not abrasive substances, but solvents. You can apply a fresh primer, and try to wipe off the wet spot with a dry cloth. After that, the surface is washed with water.

Ways to wash the primer:

• Ammonia
• Glass cleaner
• Vinegar solution

This is a fairly relevant issue, since dust sticks to the glue and dark spots appear.

Ways to remove tape stains:

• Vegetable oil. It is necessary to soak the fabric with it and leave it for several hours. After that, the doors are washed warm water.
• Fen. It is necessary to heat the remaining glue with hot air and wipe it with a napkin.
• Eraser. Oddly enough, but you can remove the adhesive tape with an ordinary rubber band that wipes the pencil.

It is quite difficult to clean up such pollution. It is necessary to remove the foam as close to the surface as possible with a scraper. Next, apply kerosene or white alcohol to the stain and wipe with a cloth. You can also use the hard side of a sponge.

For removing oil paint solvent must be used. Handles dirt well vegetable oil, white alcohol or kerosene. Saturate some of these liquids on a cloth and wipe the doors. If it is a water emulsion, then paint residues can be removed with warm soapy water with the addition of ammonia.

No matter how terrible the stains seem, they can almost always be washed off, knowing some tricks.

VIDEO: My doors

Not always external defects of the door require its replacement, more often the owners resort to the restoration of defects.

To mask the scratches, chips and scuffs that so often occur on the varnish coating, will help special formulations sold in shops. In addition to such damage, the door can be contaminated with such compounds, the wiping of which must be carried out competently and accurately. In this article we will analyze all the damage and their elimination.

How to clean, wash interior doors from greasy stains with a cleaning agent

It's amazing that interior doors from different material can be wiped off fat with home remedies without damaging the coating.

What and on which doors can be used?

• Regular raw potatoes will remove stains from MDF doors. Lubricate the desired areas with a cut of a raw vegetable and wait for the surface to dry, and then wipe it with a dry soft cloth. The method is successfully used for chronic pollution. In which case, stains on the door are removed with talc or baby powder.
• Fresh grease stains are removed with a dish detergent solution and a soft sponge. After the door is washed with plain water and wiped dry. If the surface is glossy, it is desirable to treat it with a polish.
• A viscous paste of clay and vinegar will help remove stains from an unpainted wooden door. The paste is applied to a greasy surface and waited for drying, then removed. It is better to use kaolin clay so as not to leave other stains.
• For a laminated door, grease solvents such as vinegar, ammonia, acetone are suitable. The solvent is applied to the cotton wool, and the surface is wiped. Before using it extensively, test the bottom of the door to make sure the laminate is not damaged.
• Also, glass cleaners are used to clean the doors.
• An interesting option is to remove dirt with a melamine sponge. Before work, it is moistened, it foams, and it is due to such sticky foam that impurities are removed. But do not use it on varnish surfaces.

How to treat wood and metal surfaces

Behind wooden door scrupulous care is required, as well as high-quality processing during its creation. For these factors, they will help to keep the canvas from moisture, fungus, mold, small pests, cracking.

Staged processing wooden canvas from scratch:

• Before proceeding with processing, the door is sanded with fine sandpaper. To eliminate large defects, a coarse abrasive is used. In difficult cases, the surface is puttied.
• After preparatory work it is customary to impregnate wood with abiotics, which are antifungal and anti-mold agents. They are applied like ordinary paint with a brush or roller. If the solution is well absorbed, then you can soak the door a second time after a day. The abiotic penetrates deep into the structure and protects the door for many years.

Note: You can also putty the door after applying the abiotic.

• When the door is completely dry, it is re-treated with sandpaper.
• Before painting, the canvas is covered with a double layer of primer. Use either a primer for wood or drying oil. Layers are applied not in a row one after another, it is necessary to wait for drying.
• When processing doors with a varnish composition, the coating of soil or drying oil is excluded and replaced with stain. How dark the wood will be in the end depends on the number of layers of stain. The varnish is applied in two layers. The first layer dries for at least 36 hours.

Metal is also a capricious material, and if you have not been interested in what condition your door is in for a long time, then do it right now. The most common metal damage is its corrosion, which has many manifestations. For example, corrosion by spots, pitting, through and under-film, when the destruction of the metal occurs under the coating. How can you treat the surface from rust?

• Clean the surface with wire brushes. This method is suitable for small stains, with thick layers of rust it is used at first as an auxiliary one. It is not effective, since the degree of purification is low and a lot of dust flies in the process.
• Grinding disc processing. Suitable for small damaged areas, the surface is treated with high quality if the disc is made of good stuff. It should be borne in mind that the disk is erased in the process, and its use requires skills.
• Metal sandblasting. The bottom line is that jets of sand fly out under pressure on a corrosive surface, which exfoliates as a result.
• They also use a combination of water and sand, hydroabrasive metal processing. Corrosion and previous painting are completely amenable to strong pressure.

There are also chemical methods cleaning. For this, they take chemical substances. They can be washable and indelible. The disadvantage of washable substances is that their contact with water creates additional conditions for corrosion.

• Hydrochloric or sulfuric acid at 5% concentration does an excellent job with corrosive coatings. The acids are so strong that an inhibitor must be added to them for a delayed effect on the metal. In its role is urotropin, in the amount of 0.5 g per liter of solution. A neglectful attitude to the addition of an inhibitor will play a cruel joke - not only rust will dissolve, but also metal.
• Metal is treated with a 15-30% solution of phosphoric acid with the addition of butyl alcohol (4 ml per liter) or tartaric acid (15 ml per liter of solution).
• For heavily rusted surfaces, vaseline oil (100 ml) and lactic acid (50 g) are used. The cleaned surface is wiped with vaseline oil.

But removing rust from the door is not enough, this is only the first stage in processing. What's next?

• A thoroughly cleaned surface with pronounced defects is sealed with automotive putty, waiting for it to dry, and then treating the door with an abrasive.
• The surface is covered with an aerosol primer. After that, the first layer of paint is applied, after it has dried, smudges are sanded and covered with a second layer.

The main types used are nitro enamels and powder paints, characterized by low price, stability, variety of colors.

Wax pencils and polish for pure wood and MDF

Wax and polish on wooden surfaces repair scratches and other damage. Polishes are substances capable of bringing shine to the treated surface. They are represented by pasty mixtures or emulsions with a long shelf life.

To eliminate a scratch in a tree, the damaged area is sanded with a fine abrasive, and then a soft polishing wax is applied and rubbed with a cloth. A soft wax pencil is used when treating deep scratches. Pencils have an extensive color palette to allow you to choose the right tone. After grouting the damage, the wax residues are removed with a dry cloth. The surface is varnished or painted to match the door.

When working with MDF profiles, wax pencils are simply indispensable when you need to cover up the gap at the joints of the profile.

Benefits of using wood correctors:

• Operative restoration
• Variety of color palette
• Versatility
• Durability due to increased material adhesion and water resistance.

Lacquering

Varnish is usually covered with wooden doors.

All varnishes are divided into:

• Alkyd. They come with pigment or transparent (slightly yellow). Do not dissolve in water. With additives, they usually harden quickly and become durable.
• Nitrolacs. They dry instantly, they are based on a solvent, so they are very toxic. It is convenient to apply to the surface with a spray gun.
• Polyurethane. Durable, darken the tree, so the surface is primed before applying them.
• Acrylic. They have higher environmental properties, but are inferior in terms of durability and water resistance to other compounds. Odorless, water based.

It is worth remembering: the more toxic and “fragrant” the varnish, the longer it will last. Hardeners also increase the service life.

Door Process:

• The preparatory stage involves removing the old layer of paint with a building hair dryer or emery. Old varnish is removed with sandpaper or a special remover. Next, the surface must be sanded, the size of the abrasive is selected depending on the irregularities.
• Putty, matching the tone of the wood, eliminates all the flaws.
• After impregnation against pests, a primer is applied. Both compositions must have the same base, otherwise peeling will occur.
• You can not use an additional primer if the varnish does not change the color of the wood.
• Next, the varnish is applied with quick and accurate movements. Application technique - overlap. The coating is created with at least three layers. Each of them must dry thoroughly before applying the other. All flaws in the process are skinned with sandpaper.

Before varnishing the entire door leaf, do a test in an inconspicuous place to be sure of the result.

Doors are made from a variety of materials, each of which requires a special approach when cleaning. Metal and glass are immune to the most active solvents, so the use of acetone and white spirit is allowed. In other cases, it is recommended to use alcohols, vinegar, citric acid and soap solutions - they are quite enough to dissolve most grease stains on similar and interior doors.

Doors are a place of increased contact, therefore spots appear there with enviable regularity. Especially noticeable is the problem of cleanliness, including doors, in kitchens and in homes where there are small children. The tasks of cleaning are as follows - how to wash grease stains from the doors so that the dirt disappears and the coating remains intact.

Cleaning MDF doors from greasy stains

In order to wash MDF doors from greasy stains and stains, it is not necessary to use expensive specialized products.

Of the improvised substances with fat, potatoes will do well. The washed potato is cut in half, the stain is rubbed with the bare part until it is completely saturated with potato juice. It takes a few minutes to dry, after which the dirt is wiped off with a dry, clean cloth. To avoid streaks, the cleaned coating is rubbed with talc or powder.

Note! Fresh stains from MDF are rubbed off with a solution of dish detergent diluted and foamed in warm water.

Steel door

The advantage of such doors is the resistance of the metal to even the most active grease solvents.

Therefore, when contaminated metal doors you can safely use acetone or white spirit, which is impregnated with a clean cloth. Such substances very quickly dissolve fat on a hard surface, it is not absorbed into it, but immediately passes into the fabric. To avoid streaks after cleaning, the metal can be wiped with a wet cloth.

Wooden door

Wooden doors come in two types - unpainted and painted.

In the first case, it turns out that the greasy stain falls directly on the wood, which tends to be saturated with liquids before they dry out. In the second case, we are dealing with paint on various bases, which require a special approach - you need to wash the wooden doors from greasy stains and stains, and do not damage the paint and color.

Unpainted wooden doors

To remove fat from clean wood, you need to prepare a special solution, which consists of vinegar and clay in equal proportions, mixed to a homogeneous paste. This paste is abundantly rubbed on a dirty spot. In this state, the door is left until the paste is completely dry, usually about half an hour is enough for this. After drying, the door should be rinsed with warm water.

painted door

Here, the wood is covered with a layer of paint, which prevents the fat from soaking into the fibers. Thus, the dirt dries on the surface, it can be removed with alcohol or vinegar. It is strongly not recommended to use acetone or other solvents, because they can damage water-based paint or the one that was made on their basis.

A clean cloth must be saturated with liquid, then the stain should be wiped until the grease dissolves and begins to be absorbed into the cloth. The movements should be in the direction from the edges of the stain to the center so that the fat does not smear even more on the surface.

Note! To avoid streaks, the cleaned area is wiped with a light soapy solution prepared in warm water.

Lacquered wooden doors

To remove grease from varnish, you can use vinegar or citric acid diluted in warm water. Such substances will not harm varnish coating due to not the highest activity, however, even old greasy stains will succumb to them.

As in previous cases, you can use a clean cloth or cotton pads (if the stains are small). Residual marks can be cleaned with warm water or soap.

Glass door

Glass is one of the most solvent-resistant materials, so grease can be washed off with a variety of substances.

Various alcohols and alcohol-containing liquids are especially effective (this applies to strong alcohol, antiseptics and special glass and tile cleaners). A solution of ammonia with water in a ratio of 1:10 will cope with fresh stains. Additionally, you can use vinegar, medical alcohol, soda or citric acid. Acetone or any paint thinner will deal with older and more durable stains.

In addition to a smooth glass surface, for the manufacture of doors, glass sheets with protrusions and a rough surface are used, where fat is very readily clogged and cools.

In such cases, it is necessary to wet the glass more abundantly so that the solvent penetrates as deeply as possible into the glass. hard-to-reach places and break down the fat.

The dissolved fat must be wiped off with a soft, clean cloth. To avoid streaks, the glass is cleaned with an alcohol-based window cleaner and wiped dry.

PVC doors

To remove stains on PVC or eco-veneer doors, use a mixture of liquid soap and sanitary ware cleaner. The liquids are mixed in equal proportions, the resulting mixture is evenly rubbed into the greasy spot with the help of clean rags or a sponge. It takes 5 to 10 minutes to break down the fat, after which the door is washed with plenty of warm water and wiped dry.

Doors from chipboard

Very common door covering due to its cheapness, hence the most problematic - the top layer consists of paper, which in no case should be rubbed, otherwise the appearance door leaf will be irreparably damaged.

To effectively dissolve the fat, you can use isopropyl alcohol, vinegar, citric acid and cotton pads, which wipe the stain very gently. Periodically, the discs need to be changed in order not to smear the fat even more over the surface.

For high-quality chipboard coating, solvents or acetone can be used. In this case, the stain is not wiped, but soaked by applying a damp cotton wool for 3-5 minutes. After that, the contamination should be wiped with a dry cloth.

How to clean an interior door with a polished surface

To wash polished interior doors from greasy stains, you should use all of the above products. Additionally, after the pollution has been removed, it is necessary to use it, which will restore the original shine and remove all matte traces of cleaning.

The video below shows various ways to remove greasy marks from doors:

Larisa, March 20, 2018.

How are wooden doors washed so that they retain their properties for a long time and shine with cleanliness? This question worries all owners who have an installed wooden door.

The wooden door is environmentally friendly, durable, reliable and suitable for any room design. Therefore, wooden doors are in almost every apartment, house, office.

Washing products can vary and range from expensive to folk. The choice is only yours, what kind of detergent to wash the wooden door, the main thing is to avoid strong chemicals(they can ruin the surface of a wooden door).

A large list of detergents that are used to wash wooden doors:

1. Folk remedies:

• Acetone or white spirit;
• table vinegar;
• Ammonia;
• lemon essence;
• Clay;
• Raw potatoes.

2. Household chemicals:

• Dishwashing liquid;
• Silit;
• Domestos;
• Shumanite;
• Profit.

Steps to solve the problem yourself

In order to wash a wooden door with your own hands, while doing it quickly and efficiently, you must perform the following list of actions:

1. Wipe the door with a damp cloth;
2. After that, apply the selected detergent to the entire surface of the door;
3. Wipe complex dirt more intensively;
4. Wait five minutes;
5. Remove foam and moisture from the wooden door, you can use a towel or a special cloth.

These actions will clean any wooden door, but if you still have stains, then you should resort to the advice of professionals. And in order to surely remove all stains and dirt, contact the EKS company, which will clean your apartment quickly and efficiently.

• Do not use abrasive powders when washing doors, they can damage the surface;
• When you lather a wooden door by any means, it is best to wait 5 minutes (and this is the maximum);
• Purchase a natural beeswax polish that will help keep your wooden door clean and shiny;
• If the stain is greasy and old, you can use regular potatoes. Cut the vegetable into two parts, attach the cut to the stain, wait a bit. After that, be sure to wipe the door dry, the stain will definitely go away;
• The prepared solution will help to remove fat from wooden doors: 2 tbsp. spoons of ammonia + 1/2 liter of warm water. Gently wipe the stain with this solution, it is guaranteed to cope;
• To remove difficult stains, a solution of mixed clay with vinegar (in equal proportions) can help.

Following the advice of professionals, you can easily understand how to wash wooden doors.