Trap for fruit flies. How to make a fly trap from a plastic bottle. The main types of homemade traps

Noticing the flies, you should not immediately try to destroy them, it is better to follow the insects to find a problematic place in the house. Midges love wet, dirty places, and you need to carefully inspect possible problem areas in your home:

1. In the kitchen, it is worth examining the cabinets with stocks of cereals, home-made preparations, perhaps something has deteriorated, and it was there that fruit flies started up. Forgotten food waste, rotten fruits or vegetables attract midges, and they multiply rapidly.
2. Pay attention to plumbing, sewer drains, ventilation holes.
3. In living rooms, flies most often choose to live in aquariums with stagnant water, cages that contain pets.
4. Ground flies infect indoor flowers, you just have to overdo it with watering. Rotten particles form in the soil, and midges instantly settle here, affecting the roots of the plant.

Before taking drastic measures to combat domestic insects, it is necessary to clean the house to prevent further reproduction of midges. It is necessary to remove all perishable products in the refrigerator, check the cabinets, wash the shelves with soapy water, treat water and sewer drains with special means.

You should especially take care of pets, an aquarium with fish, and also check indoor flowers.

Advice: having found earth midges, the plants are carefully examined, the damaged and rotted parts are cut off and the flower is transplanted into fresh soil.

The trap for midges will get rid of insects in the house

The prospect of using insecticides to kill insects in the home appeals to few. Although these drugs are of low toxicity, if there are small children, animals suffering from allergic diseases in the house, then it is better to refuse their use. It is worth trying safe methods, and the midge trap works quite effectively.

Advice: you can buy purchased traps, for example, "Raptor" with a bait liquid that attracts insects, they fall on an area covered with a sticky substance, where they die.

Often there is no way to purchase a ready-made device, then it is better to make a do-it-yourself trap for midges, which will help get rid of uninvited guests. To make it, you can use available home remedies.

We offer five ways to make simple fixtures yourself:

Drosophila do not pose a direct danger to humans. But their presence in the house brings a lot of inconvenience. Many housewives are wondering "How to get rid of midges." This problem is of particular relevance in the warm season, when the season of fresh vegetables and fruits comes.

Differences between Drosophila and other midges

Midges are unpleasant neighbors that cause a lot of inconvenience to humans

Drosophila belongs to the category of Diptera fruit flies. The number of their varieties reaches 2000. The size is 1-3 mm. The insect has an oval body of dark yellow or Brown, 6-8 paws and 2 wings.

Sometimes there are orange and black midges, but this is a rather rare occurrence.

Drosophila differ from other varieties of midges in habitat, degree of danger, reproduction rate and gastronomic preferences. These insects are the most harmless to humans. But their presence causes some troubles:

1. They ruin food supplies. Moreover, it can be both a large warehouse and a small cellar. If fruit flies settle in large food stores, the products will become unusable, which will entail significant losses.
2. They cause no less harm in private cellars and basements, where bags of sugar, flour, boxes of potatoes or tomatoes are stored. Drosophila can damage fruits that have not yet been harvested.
3. Neighborhood with these midges cannot be called pleasant. They can fly into the eyes, nose, mouth, and also contaminate curtains and wallpaper.

Reasons for appearing in the apartment

Drosophila spread rapidly. The female lays about 20 eggs at a time. They are born in the early morning. Therefore, when you wake up, you can find a lot of fruit flies in the apartment, which were not there yesterday.

Important! Insects are able to reproduce already eight hours after birth, the larva turns into an adult in 8-10 days.

They enter the apartment in different ways.

1. Fruit flies lay their eggs in the skins of fruits and vegetables that we bring into the house. Midges choose soft fruits, the peel of which they can bite through. Distinguishing damaged fruit is an almost impossible task.
2. Insects also start in the trash can.
3. Another way for midges to enter houses is open entrance doors and open windows. Drosophila attracts the smell of fruits. Insects can take up residence even if you use cherry, lemon or orange scented air freshener.

Larvae can be seen only at an early stage of formation, when the midge has just laid its eggs. During this period, their size reaches only 0.5 mm. The larvae are identified by white color. Further, they take on the color of the fruit, so we cannot identify them when buying fruits or vegetables.

Midges can enter the house through open windows and doors, as well as fruits and vegetables brought into the apartment.

How to get rid of fruit flies

There are many ways to eliminate insects. You can find special devices for sale or make them yourself.

store funds

To combat Drosophila use:

• traps;
• sprays;
• repellents;
• zappers.

Traps

Among the traps are the following models:

• BEAPCO 6-Pack Drop-Ins Fruit Traps;
• Victor M380 Fly Maqnet 1-Quart Reusable Trap With Bait;
• Fly Web Fly Trap;
• TERRO Fruit Fly Trap T2500.

1. The duration of the first device is one month. The kit includes six traps and a liquid, non-toxic chemical. One set of BEAPCO 6-Pack Drop-Ins Fruit Traps will last for six months. The chemical can be replaced with apple or wine vinegar. The trap works in the following way. An insect flies in through a special hole and cannot get back out. The midges do not die from the poison, they are simply trapped. BEAPCO 6-Pack Drop-Ins Fruit Traps are compact in size. This allows you to place traps throughout the apartment.

BEAPCO 6-Pack Drop-Ins Fruit Traps are compact

2. The Victor M380 Fly Magnet 1-Quart Reusable Trap With Bait comes in white and black. It also includes a chemical non-poisonous liquid. Drosophila fly into the lid of the device and remain inside. This trap has some advantage over other models, it can be used repeatedly. The device just needs to be rinsed with water. The model is designed to fight fruit flies, bees and wasps will not be able to fly into it.

Victor M380 Fly Magnet 1-Quart Reusable Trap With Bait

3. Fly Web Fly Trap attracts fruit flies with ultraviolet light. The trap has a built-in double 9W light bulb. The midges fly to the radiation and get on the adhesive tape, which must be changed as it is used. The advantage of the model is the absence of chemicals and odors. The device requires power to function.

The device is exposed to ultraviolet light

4. The action of TERRO Fruit Fly Trap T2500 is aimed specifically at fruit flies. Other insects will not fall into this trap. It is made in the shape of an apple and has a characteristic smell. The duration of operation is 30 days.

Flavored trap

Zappers

Zappers act on midges with electricity, as a result of which insects die. We recommend the following devices:

• Electronic Indoor Insect Killer Zapper-15.5 Inch is a fairly effective zapper, however, it should be borne in mind that this is a bulky device that consumes a significant amount of electricity, so for small apartments such a model will not be very convenient;
• The Executioner Fly Swat Wasp Buq Mosquito Swatter Zapper is small in size, but its effect only applies to midges that fly close to it. To get a result from this device, you need to direct the fruit flies in its direction. The power source is batteries, that model does not depend on the mains;
• Rechargeable Electric Insect Bug Bat Wasp Mosquito Zapper Swatter Racket anti mosquito killer Electric Mosquito Swatter.

Zappers have greater efficiency compared to other anti-fly devices

Repellents

Among the repellents, you should pay attention to the Hot Shot 5580 No Pest Strip model. It is a strip small size impregnated with chemicals. The repellent is in a special container. It is hung in a room that needs to be cleared of midges. Poisonous vapors begin to emanate from the tape, as a result of which the insects leave the apartment. A person does not feel this effect. But you need to ventilate the room.

Repellents act chemically

Spray

Sprays will help get rid of midges and destroy their larvae. Garden Safe Insecticidal Soap Insect Killer 24-Ounce Ready To Use Spray 10424X is designed to treat indoor plants. When the product gets on midges or eggs, they die. This effect is provided by fatty vegetable acids, which are part of the spray. It does not apply to humans.

Spray - safe remedy, but less effective against fruit flies

Other means

1. If fruit flies are localized in the sewer or sink, Invade Bio Drain Gel-1 qt will be required to eliminate them. The drug is available in the form of a gel, does not contain aggressive chemical elements. Has a pleasant smell. It dissolves organic matter in pipes, destroys insects and larvae. If the spray is poured into a spray bottle, it can be used as a sprayer.
2. Insects can harm not only fruits, but also houseplants. They lay their eggs in the ground, and the larvae feed on the root system. As a result, the plant dries up and dies. Grom-2, which is available in powder form, will help to cope with such a problem. But first, separate the diseased plant from healthy flower. Then sprinkle the powder into the soil. Work with gloves and a mask. The room after the procedure must be ventilated.

Folk methods

You can make a device for combating midges on your own. There are several options for traps:

1. One of the delicacies that fruit flies are very fond of is bananas. Remove the peel from them and place it in a plastic bottle or plastic bag. Then poke holes with a toothpick. Place the trap close to where the insects are. Within 1-2 days, a significant part of midges will fall into it. They will not fly out of the trap.
2. You can fight insects with liquid. To do this, you need a regular deep plate. Pour juice, honey, syrup or Apple vinegar. Then put the peeled fruit without peel. Cover the plate with cling film on top. Just like in the first option, pierce holes. homemade device for the destruction of Drosophila is ready.
3. Another way to get the midges out is to make a trap in the shape of a cone. Find glass jar and put the rotten fruit in the middle. If there is no such fruit, you can use a piece of orange or banana. Roll a sheet of paper into a cone shape and insert it into the neck of the container. Insects will fly into the jar, but they will not be able to get out.
4. Drosophila can be smoked. Grind camphor, pour it into a pan and put on fire. When steam appears, carry the dishes through all the rooms. For humans, this procedure is harmless.
5. A vacuum cleaner will help eliminate midges. Treat insect habitats with it, shake the bag outside the house.
6. If you notice larvae on plants, water them twice a month with a weak solution of potassium permanganate. For this purpose, you can stick 3-4 matches into the soil with the sulfur side down.
7. Drosophila are mainly localized in the kitchen. Inspect food, remove rotting fruits and vegetables. Store undamaged fruits in the refrigerator or in the cellar.
8. Geranium will help scare away fruit flies. They do not tolerate the smell of this plant.
9. Similarly, insects react to garlic. If you can tolerate its smell, grind up a few cloves and put them in the kitchen. Remove after a few hours.
10. Peel an orange, wrap a clove stick in the peel. Place this remedy on the areas of insect localization.

To combat them, you can use various methods, including traps, which have the following advantages:

However, the use of traps also has some negative sides, the main ones are:

1. Low degree of effectiveness compared to the use of insecticides, which allow you to virtually instantly destroy entire populations.
2. No protective effect. Only those individuals that fall into the traps will be destroyed.
3. It is necessary to wait for the moment when the fly pays attention to the trap and falls into it., while some other methods allow you to immediately proceed to the destruction of pests.

Types of traps

The classification of such devices is carried out according to the principle of their action today, in accordance with this criterion, the following varieties can be distinguished:

1. Glue traps are one of the most well-known and common varieties, and their popularity is due to their simple design, which makes them easy to use and low cost. You can use houses or adhesive tapes that are attached to any surface. This type of device has a double effect, since it allows you to catch both flying and crawling insects. However, it is recommended to use hanging adhesive tapes directly for the extermination of flies. Despite the fact that crawling insects cannot fall into such traps, they will be one of the most effective means against flies.
2. Devices containing baits poisoned with various types of insecticides. They are considered traps only formally, since in fact they are not intended to catch flies, but to attract their attention with food bait in order to cause poisoning and subsequent death. They are usually used to kill cockroaches or ant, fly control devices are not so widespread, since other options have a much higher degree of effectiveness.
3. Mechanical traps with various baits designed to collect trapped insects. Devices of this type are used to catch virtually all types of insects and flies in this case are no exception. Exist various options, but they all work in the same way: flies get inside a special container, attracted by the bait, but can no longer get out on their own.
4. Electric traps are the most innovative way to fight, there are models designed to destroy various kinds insects. To attract mosquitoes and butterflies, special lamps are usually used, into the light of which they fly, while for flies, devices with fragrant bait are suitable, which will attract them with their smell. After getting inside the trap, the insect will receive an electrical discharge that is fatal to insects, while it is not capable of causing any harm to humans or pets. Electric models are the most expensive, but they are designed for long-term use, because the traps only need to be cleaned of dead insects from time to time, after which they will be ready for use again. To date, there are two types of electrical devices: functioning after being connected to the home electrical network or powered by replaceable batteries. The second option is usually used for catching flies outdoors.

Traps Overview

Given the wide range of modern fly catching devices, it can be quite difficult to choose the most suitable option.

To make this process as easy as possible, the following is an overview of the most effective tools:

Aeroxon sticky tape is made in Germany and is the simplest fly trap. Its use does not require any additional costs, it contains only cellulose and ordinary glue, the device is environmentally friendly. Sold in sets, which include four skeins of tape at once, the price is 100 rubles.

The HELP trap also has an adhesive element in its design, designed to be placed on windows, so flies are caught shortly after entering the room. The main advantage is the almost complete invisibility of this device, which can be purchased you can for 80-100 rubles.

The Raptor trap can is especially effective for catching flies and other flying insects outdoors. It is enough to place the bait that comes with the kit inside the tank, and then close the roof. The jar can be placed on any surface or hung on tree branches, and insects that have got inside will no longer be able to get out. The approximate cost is 300-350 rubles.

FC001 is a mechanical fly trap. It starts working after a special tablet is inserted into it, after which the device produces heat and smells that attract insects. It is enough to have no more than 2-3 tablets in stock, this amount will be enough for the entire warm season. The price is about 3500 rubles.

The Excalibur Aqua 80 IPX4 ZSP005 is a unique tool and trap designed specifically for flies, which has no analogues on the market today. The device is recommended for installation in places Catering, in large enterprises or logistics centers, although it can also be used in residential areas. The basic principle of operation is to defeat insects with deadly electrical discharges. The body is made of high-quality and high-strength polycarbonate, and the trap itself is provided with a moisture protection system, which makes it unpretentious to environmental conditions. The approximate cost is 50,000 rubles.

"SKAT 23" is a trap of domestic production, which, in addition to flies, allows you to destroy mosquitoes, which makes it a multifunctional device. The design includes lamps of a special type that do not emit heat, but attract flying insects. As soon as they touch the protective grid, they receive a deadly electric shock. The device is environmentally friendly, silent and does not emit any third-party odors, while its the price is only about 4000 rubles.

Flypod ZF050 is not only highly efficient in operation, but also attractive design, which allows the device to harmoniously fit into virtually any interior. The combination of this factor with small dimensions and features of functioning makes the trap look like a small decorative lamp. Best suited for placement in public areas, cafes or living rooms where you don't want to use duct tapes that don't look very attractive. Insects die when they get inside and come into contact with an adhesive liner, which can then be replaced with a new one. The approximate cost is 8500 rubles.

Fly Web Fly Trap is a trap that has not yet become widespread in the domestic market, but it can be ordered via the Internet. It has several effects, including light, which allows you to attract not only flies, but also a number of other flying insects. The device is a consumer of energy, so it can only function after being connected to the mains. The only drawback is the fact that it is extremely attractive to butterflies, moths and other harmless insects, which are also likely to fall into it. The cost of such a trap, excluding delivery, is about 2000 rubles.

The Sterling Rescue Outdoor Fly Catcher Trap is also currently an online-only model. Outwardly, it is a reservoir bag made of durable plastic. To start operation, you need to add a small amount of water inside, and then hang the device in the apartment or on the street. Inside it is a special attractant, which is quite attractive to flies and attracts them to itself. . The captives who got inside will no longer be able to get out, one trap is designed for 20,000 flies, after which it is disposed of. It must be used carefully so as not to damage the tank, and also place them in safe places, because over time, larvae may begin to breed inside. The approximate cost is 800 rubles, excluding delivery, two devices are supplied in the kit at once.

A plant called Venus flytrap is not a deterrent, but a real fly trap. In its natural environment, it grows mainly in swampy areas, where the soil is not fertile and actually does not contain nutrients. To compensate for them, this flycatcher eats insects, and flies form the basis of the diet. Such a plant can be planted in the territory garden plot or grow in a pot like indoor plant. It is recommended to keep it on the windows from the sunniest side and the Venus flytrap will not only decorate the apartment, but also a real thunderstorm of flies that have flown into it.

DIY fly traps

The purchase of store fixtures is not prerequisite because there are a number of ways self-manufacturing traps.

To implement this idea, you must use the following algorithm of actions:

1. Prepare a small glass jar in which you need to pour the juice. It should fill no more than a third of the container.
2. Add a few drops of soap or dishwashing liquid to the liquid bait, which will eliminate the possibility of a possible escape of caught insects.
3. Fold a piece of paper like this so that it takes the form of a cone, the diameter of one of the holes of which should not be more than 5-8 mm.
4. Paper cone is inserted narrow side inside the jar.
5. Flies will get inside homemade device through a small hole, after which they will either sink into the liquid or remain sitting on the inner walls of the jar.

To do this, you will need to repeat the following sequence of actions:

1. Mix the same amount castor oil and rosin.
2. Melt the mixture and add a small amount of honey and jam to it, which will be the main bait.
3. Cut out paper strips, the recommended width should be 5-8 cm.
4. Process both sides of the cut strips prepared mixture.
5. Hang a homemade trap in places, where a large number of flies usually live, after which they will begin to stick to its surface.

Summer is the favorite time of the year for most people in our country. But there are also a few unpleasant moments that appear with the advent of warm days. And one of these moments is the invasion of flies and mosquitoes. They buzz unpleasantly and spread various diseases.

How to get rid of these harmful insects? Can be purchased at the store chemical agent. But chemistry in our life and so abound. There may be allergies to various aerosols, especially in children. Therefore, many prefer homemade devices.

The main types of homemade traps

Lures. The principle of baits is to lure the fly into an enclosed space from which it cannot escape.

Poison traps are similar in design to regular baits, but their purpose is to kill insects, not just to lure.

Electric shockers and electric nets. Shockers kill insects with an electric discharge. Nets attract flies with a bright light, and then drag them into a trap with a makeshift fan.

Let's take a closer look at how you can make the most common fly traps with your own hands.

Plastic bottle

This is the easiest fly trap to make. It is necessary to cut off the upper part, and pour a couple of glasses of water with honey diluted in it into the lower one. Mix properly.

Can be applied Alternative option bait - liquid jam, compote or beer. Turn the top of the bottle upside down and place it in the bottom.

The neck should be several centimeters above the water level. This design will not allow the pest to get out.

Glass jar with funnel

We take a medium-sized jar and place the bait inside (the options from the first example will do). Place a funnel on the neck of the jar. You can start operating.

Both of these traps can be turned poisonous by adding insecticide to the liquid bait.

Plastic container

This do-it-yourself trap option is suitable for fruit flies (another name is fruit fly), because they are small in size and, accordingly, will easily crawl into small holes.

We put in a container favorite treat Drosophila - spoiled fruits. We cover cling film so that it fits snugly to the edges, and we make several holes in it.

Instead of a container, you can use a glass. Basically, for fruit flies any trap will be effective if there are spoiled fruits as bait.

Trap for giving

If you are not lazy and spend a couple of hours of time, you can create it yourself effective trap for flies, which was used by European colonialists when moving to Australia. She's different large sizes and high efficiency.

To make an Australian fly trap, we need wooden blocks, fine-mesh metal grid, small carnations or a construction stapler, thin wire.

From the rails we make a frame in the shape of a cube. If you have an unnecessary stool with a square base, just remove the seat from it - and the base for the trap is ready. We cover the side walls of the frame with a mesh and fix it with a stapler.

From above, you need to build a mesh cover so that it is convenient to get the catch. Next, we make a pyramid from the grid. Cut out four isosceles triangles (the base of the triangle is equal to the length of one side of the cube). We connect the sides of the triangles with a wire.

Cut off the top of the pyramid to make an "entrance" for the flies. We fasten it along the perimeter of the bottom with a cone inward. Such a trap will be especially effective in the country, where there are a lot of insects. Under it you need to put a fragrant bait and wait.

The fly flies to the bait, and after eating, it tries to fly up and gets inside. A fly does not guess to fly out through a small hole. Her fate is sealed.

Velcro trap

To create such a trap, we need thick paper, liquid rosin, sweet liquid and castor oil. Cut the paper into strips of suitable width and length. We mix all the ingredients, heat it up and apply the composition on paper.

If necessary, we make a loop of thick thread. Velcro is ready. Instead of this composition, you can use purchased glue from insects and rodents.

Another version of Velcro is a CD covered with an adhesive base. It is necessary to tie a loop to the disk, apply jam or honey to the surface and put it in the freezer to make the composition more viscous.

Trap with ultraviolet flashlight

Velcro can be made in a more complex design. For its manufacture, you will need any unnecessary can, for example, a can.

We glue the outer surface with electrical tape, and then remove it so that a sticky layer remains on the surface. Attach a flashlight inside. Insects attracted by the light will stick to the jar. The option is suitable for individuals of small size.

stun gun

We will need a high-voltage module, an energy-saving light bulb (preferably a spiral shape), a battery, a switch, electrical tape, glue. We disassemble the light bulb into components. We get a lid and a flask. We don't need a plinth.

We cut a hole in the plastic cover into which we pass the switch. We thread the module itself into the cap and solder it to the switch, the switch to the battery. We attach the module to the cover using hot glue.

The battery can be fixed with electrical tape. We drill two holes in the cone, into which we pass a piece of aluminum wire. We wrap each around the flask so that they do not touch. We cut off the excess.

At the base of the bulb from the inside, we see two wires. We connect one of them to the end of the aluminum wire. There are two free contacts left inside the bulb: the second end of the wire and the “native” wiring from the light bulb.

We connect a high-voltage module to these contacts. We put a lid on the flask. The shocker is ready. It must be hung in a place of accumulation of insects.

electric net

Necessary elements for creating an electric net: a small motor (10-20 W), a light bulb, two tin cans of different diameters, a battery, a round flat board, an aluminum plate (2 by 10 cm), two metal strips, clamps (screws, screws, epoxy glue , rubber ring), nylon bag.

We cut out the blades from an aluminum plate and bend them, as for a fan. We make a hole in the center, put the blades on the motor shaft. Fix with glue.

Fasten the bulb holder with screws to the plank. We connect the cartridge to the motor starter. We place the structure in a jar of smaller diameter and fasten it with screws so that the blades are a couple of centimeters below the edge of the jar. The base of the cartridge must be covered with a second can.

We put a nylon bag on the bottom of the device and fix it with an elastic band. We connect the battery. Ready. Certainly, electric traps for flies are more difficult to implement, but their effectiveness is quite high.

You can give preference to one of the types, or you can apply several different ones at once. makeshift traps. An integrated approach will be more effective. However, when using any insect repellent, do not forget to keep clean and remove food from the table in time.

DIY fly traps photo

Everyone loves summer, but we're sure no one likes the sudden increase in creepy insects that breed at an alarming rate during the warmer months.

At the same time, no matter how clean you keep your house, there are flying aliens who stubbornly try to get into it and with varying degrees of difficulty they sometimes succeed.

And after that, the insects simply do not want to leave the comfortable dwelling of a person. Therefore, people have to invent the most different ways to get rid of uninvited guests. And here the ability to think creatively often comes to the rescue.

For example, Imgur user Donkey1521 came up with a simple fly trap made from ordinary plastic bottle. It is easy to make and non-toxic, while fighting the most different types flies - from large dung to small fruit flies.

In order to get started, you only need a few things: for the trap itself, you need a plastic water bottle, and for the bait, a banana and granulated sugar.

Imgur/Donkey1521

First, you need to cut the bottle in two using scissors or a sharp knife. To do this, mark the cut at a distance of about two-thirds of the height of the bottle from the bottom, and then go around the circumference with a cutting tool. When you're done, you should have two pieces: a smaller one with a lid and a larger one that can sit on a table.

Imgur/Donkey1521

Pour about one tablespoon of granulated sugar into the larger part of the bottle until the bottom is covered. Then cut ripe or slightly overripe bananas into small pieces.

Imgur/Donkey1521

Place the sliced ​​banana on the sugar in the bottle; this sweet mix will help lure flies that feed on decay products and decaying organic matter.

Imgur/Donkey1521

Once you have the banana and sugar in the bottle, lightly mash them together to form a sort of puree. Add about 4 centimeters of warm water to the puree and lightly stir the mixture. warm water and sugar will cause the banana to rot faster, making it a more powerful fly bait.

Imgur/Donkey1521

Now that most of the bottle is done, it's time to move on to the smaller part. unscrew plastic cover and turn the smaller part upside down. Then place the smaller portion inside the larger one so that the hole is in or directly above the banana mixture. Your trap is now ready for use.

Imgur/Donkey1521

This trap can be used for about a week. During this time, its lower part should be filled with flies. After a few days, it may start to look a little nasty, but it's worth it to get rid of any flies in your home.

Imgur/Donkey1521

Here's a close-up of how a fly trap works. The flies move down through the neck of the bottle at the bottom towards the banana bait. After that, they struggle to get out through the hole and drown inside the bottle. Cruel, but it does its job!

Imgur/Donkey1521