What paint to paint carved platbands. What color are the windows painted in a wooden house in the country. Painting the door frame and architraves

Wooden house and windows white color- a classic Russian version, inherent in private development in most regions of our country. But this is not the only solution: the ways of color decoration are described below. window openings in objects made of natural material, as well as what to be guided by when choosing a coating material.

Types of coating compositions

Wooden frames require more care than PVC or aluminium. Their main drawback is the need for regular staining, as natural conditions constantly affect the decorative surface. How to paint windows wooden house? Today, the following compositions are popular:

Universal paints do not exist: each performs a specific task. Therefore, before acquiring them, one should determine the goals and only then tend to choose one or another coverage. By the way, the price is not an indicator of quality and vice versa. It is necessary to trust only proven and reputable manufacturers.

Painting old frames

Give old window new life, even if the design is outdated, it is quite possible by following simple recommendations. The color of the windows in the log cabins can be any. White universal will give the building freshness, but sometimes it can turn yellow from the bright sun. Frames of brown, coffee or beige shades are good, in combination with wood they make up a harmonious ensemble.

So, the sequence of actions:

It is recommended to completely disassemble the window structure into its components - a box, frames, glazing beads, fittings. All wood is carefully inspected for damage. If it is found, it is mercilessly disposed of by abundantly wetting the parts with strong aqueous solutions of chemicals. After the procedure, the wood must be given time to absorb. If the foci of damage are very pronounced, it is worth refusing to extend the life of the entire window block.

Further, the entire structure is covered with a solvent or heated with a building hair dryer, of course, removing all the glass. This will remove the old paint. They act with a spatula, carefully, layer by layer, freeing a clean tree. You can use a grinder or operate manually, then it will take more time, but the risk of spoiling the surface with automation will be less. After processing, parts of the frame are again impregnated with protective compounds.

All irregularities, cracks and defects are puttied. For this, it is purchased special composition hardening in air. After restoring the contours of the glass, they are inserted back, carefully hammering in the glazing beads. The block is ready for painting.

To decide what color the windows in the house should be, the shade of the roof helps. This is most harmonious for a private object. Of course, there is hardly a white roof, but this color goes with everything, so you can safely act in this case.

Stages of work:

After the final drying of the layers, the frame is inserted into place, the doors are hung, and the fittings are installed. You can “revive” the window with the help of beautiful hinges or handles - copper or brass perfectly emphasize the richness of the wood.

Choice of color solution

Many owners choose colors based on the style of the building. For example, a Russian wooden house, the color of the roof and windows welcomes the same or, in general, natural. With the help of a varnish or a glazing matte composition, light wood shades can be preserved.

It is not forbidden to make window structures ocher or brick - dark brown. There is a plus here: rain drips and dirt from fallen leaves are less noticeable on the windows.

Other styles, such as chalets (Swiss houses), Art Nouveau (double light objects), country (rustic) also tend to be diverse, not dissonant with the walls of the building. You can highlight windows with light shades - yellow, orange, blue. The latter option is acceptable only if the building has an appropriate roof or doors.

Wooden houses in the style of minimalism do not welcome frills - bright colors are not for them. Best to highlight window blocks painted architraves or emphasize openings with painted casing boxes. The rest of the frames remain wooden, sanded and lacquered.

Whatever the owners choose, it is important to remember that the composition of the paint should not be corrosive, contain too many chemicals and volatile compounds, so as not to harm the wood. So, having decided the question of how to paint, you can get to work: all the recommendations are available and do not require much skill and skill.

Despite the practicality and ease of care for plastic windows, many people prefer wooden windows. This material has strength, sound insulation, reduced heat conductivity.

Wood is an environmentally friendly material, so these windows do not emit harmful substances without harming health. One of the criteria for caring for a tree is proper painting. You will never freeze in a wooden house if you take care of it properly.

How to paint wooden windows

To make the windows beautiful, you need to know how to paint, because not every paint fits well and will look attractive. This is especially worth considering from the outside, because. under the influence of various environmental factors, the paint quickly peels off. Indoors, constant contact with condensate, temperature changes, it also becomes unusable.

Important! It should be borne in mind that a tree often becomes a substrate for the occurrence of mold, fungi, and various pests.

To prevent this from happening, you need to know the rules for correct painting windows. For a good result, you need to follow simple recommendations:

• Suitable weather. After painting, the paint should adhere well to the wooden surface, so you need to choose a day so that there are calm weather conditions without precipitation.
• For quick drying, the optimum temperature is 5 C, and humidity is 80%.
• If you apply the paint on a wet surface, then bubbles will soon appear, and you will need to apply a new layer.

The painting process itself is carried out in several stages.

Preparatory stage

Due to the influence of external weather influences, thermal insulation can deteriorate significantly. However, before staining, you can get rid of this issue. If the windows are already old and have had time to dry out, then sealing is needed. This process takes place in several ways:

• The first method is to apply sealant to the frame, and then mount the glass there. To do this, you must first get it, which causes a lot of inconvenience.
• The second method is much simpler and consists of sealing with ordinary window putty. But this option is less efficient than the first one.

Paraffin can be used as a putty. First, it is heated to a liquid consistency, and using a syringe, it is poured directly into the cracks. After the paraffin comes to a standard solid state, we remove its excess.

Important! Before painting, make sure that the window closes and opens without any obstruction. In case of a problem, it can be eliminated by normal grinding.

Cleaning off the old coating

The old layer of paint can be removed by the following methods:

• Chemical - specialized solvents can be bought at any car dealer.
• The thermal method is carried out using an industrial hair dryer, the air temperature of which should not be higher than 250 C. After drying, remove paint residues with an ordinary spatula or sandpaper.

Sashes and other elements must either be removed or covered with newspaper or tape. You also need to take care of the glass. In those places it is necessary to glue a gap of 2 mm from the edge.

Antiseptic treatment and puttying

The next important step is antiseptic treatment. If this is not done, then there is a risk that wooden frames will not last long, but will become a breeding ground for fungus, mold, and pests.

After the antiseptic has dried, you can start applying acrylic putty. This process proceeds in several layers, from thick to thin. This order is necessary for better fixing on a wooden surface, otherwise it will begin to crumble right with the paint.

Before puttying, it is very important that there are no cracks and various defects. Therefore, you can safely take sawdust, mix them with wood flour or glue and remove errors. The first layer is applied thickly, and then thoroughly cleaned with sandpaper, sanded and cleaned. After a few hours, repeat the procedure and do until the surface is completely even, so that the windows look well painted.

Priming helps create protection and at the same time becomes an antiseptic. It should be specifically for wooden surfaces.

Paint preparation

It is necessary to buy coloring agents such that they meet all the parameters:

• moisture resistance;
• density;
• good application;
• elasticity.

Do not allow wood to come into contact with water - this can lead to the formation of mold and mildew. Therefore, it is better to purchase a moisture-resistant paint that will protect and prevent water from leaking into the deeper layers.

Important! It is not allowed to paint platbands and frames with facade perchlorvinyl paints, bituminous varnishes, epoxy enamel, vinyl paints.

Choosing a color and preparing for painting

To choose the right color, you need to follow a simple algorithm: "In the shade - any shades, on the sunny side - only light ones." Internal slopes and architraves must be painted with enamel paints, because. they are bright and look good, in the outer slopes - oily.

Before painting, add a drop of solvent to the paint. Calculate the amount of paint from how much material you need to make the wooden surface and trim look painted. For work, you should prepare the details:

• masking tape;
• paint brush;
• unnecessary rag;
• sandpaper;
• putty;
• primer;
• White Spirit;
• dye.

It is necessary to paint in several layers:

• The first layer is liquid to fill in all the errors. It is better to paint with a brush or roller.
• The other layer implies a thicker painting. If there are drops or smudges, they can be removed with a rag.

The front side is painted first. If there are platbands, then they should be given special attention, because. they are the decoration of the house. When everything is painted, it remains only to remove the adhesive tape.

Important! If you need to close the sashes, then you need to put foil between the sashes, which will prevent them from sticking together.

Stain finish

Stain refers to liquid impregnation. It enhances beauty and allows you to change the shade. It is especially good to apply it on platbands, which gives them a special charm and design zest.

Also, its advantages include that it protects against UV rays, and prevents decay. This impregnation is done on an oil or water basis. However, there is no way to avoid the minuses, because when they are applied, they can leave ugly spots, because. dry out quickly. Also, for uniform distribution, an airbrush is required, which not everyone has.

If you use a water-based stain, you must be prepared that the wood may degrade its qualities, therefore, before processing, the wooden surface must first be wetted and then sanded.

Conclusion

Wooden houses have a large number positive qualities, however, they can quickly lose operational functions.

Despite the fact that the market is being conquered more and more by plastic windows, wood products will never lose their relevance, whether budget options or expensive hardwood models. This material has one salient feature: In order to prolong the service life, it needs to be painted periodically. In this article, we will look at how to do it yourself to ensure high quality and reliability of the finish.

Despite all the advantages of PVC windows, many opt for wood because of the environmental friendliness of the material, even though such structures require much more attention and constant care.

Photo: the perfect paint layer on the frame significantly improves the appearance of the window

Main stages of work

As in any other type of repair work, when painting window frames must comply with certain technological process and carry out all the work in a certain sequence. So you can not spray on unnecessary actions and do what you need at the moment.

What you need to purchase before starting the repair

Consider the main materials and fixtures that are most often used in such work:

• A special scraper for removing the coating (if the windows are new, then this device is not needed).
• Brushes of different widths, it is better to choose high-quality products with natural bristles.
• Sandpaper, and it is better to have several options for different roughness.
• If you need to remove a lot of paint, then it is better to purchase a so-called wash, with which the process of removing the old coating will become at least several times easier.

Washer is an excellent development that greatly simplifies the process of removing various paint and varnish coatings

• If earlier the question of how to paint a window without staining the glass was acute, now you can purchase masking tape and a special covering film. The price of these products is low, but the benefits are huge.
• If there are cracks or crevices on the surface, wood putty and a spatula are required to apply it (as practice shows, it is most convenient to work with a small rubber device).

You can buy this composition at any hardware store.

• To achieve the best result, it is imperative to use a primer. The brand of the composition should be chosen depending on the type of paint, so you should purchase a specific option after you decide what type of finishing coating will be used for painting.
• The solvent is necessary both to give the composition a certain consistency, and to clean the working tool.
• For the convenience of work, it is best to use a ladder-ladder. Certainly, perfect option- removal of frames, but the window box, one way or another, cannot be removed.
• It is best to replace the glazing beads, but if they are in good condition, you can limit yourself to removing and cleaning. In any case, you will need a small hammer and glass nails.

Small finishing nails work well - they have a reduced head and zinc coating, making such fasteners much stronger and less noticeable

• An antiseptic will be needed for surface treatment and will extend the life of structures.

The choice of paint depends on many factors, choose the option that has proven itself best in your conditions.

Preparing the elements

We note right away that great importance has the choice of the correct time of work, scorching heat is as undesirable as dampness and rain. Optimal conditions are spring or autumn days without an abundance of sun and an average daily temperature in the region of 15-20 degrees, so the composition will lie on the surface best and will not be absorbed as quickly as in hot periods, which directly affects the reliability of the coating.

Consider how to prepare windows for painting:

• As noted above, it is best to remove the frames and work on a table or other surface. It is best to carefully remove the glazing beads and remove the glass. If it is impossible to remove the frame, you will have to do everything on the spot.
• If the old coating is held securely and there are only unreliable areas in some places, then it makes no sense to clean the entire surface. If the paint is swollen and cracked over almost the entire area, continuous processing is necessary, it is best to use a wash (how to use it, the instructions on the package will tell). Without the use of special tools, cleaning will take a lot of time, but the job is quite doable in this way.
• The next action is the treatment of wood with an antiseptic composition, this event should not be neglected, since it directly affects the durability of structures.
• All cracks, chips and other irregularities should be sealed with putty, while remembering that you should not apply too thick a layer at a time - the composition shrinks, and, in addition, the likelihood of cracks is very high. After the composition has dried, it is necessary to treat the surface with sandpaper, and if there are irregularities on it, it is necessary to putty again and process all problem areas.

Small irregularities are patched up very well.

• The last stage of preparation is the application of a primer, this allows you to additionally protect the surface and avoid the appearance of dark spots in places where putty is applied.

Paint application

Everything is quite simple here:

• If the frames were disassembled, then the question of how to paint the windows without staining the glass is not relevant, in all other cases it is necessary to glue masking tape around the perimeter.

Tape protects glass from dirt

• The first layer is applied with diluted paint and serves as a kind of base.
• After drying, a second layer is applied, while the paint should be thicker. It is best to apply a third layer - so the protective coating will be as durable as possible.

Important!
If the glazing beads were removed, then they must be painted separately and put in place after drying.

Some features of the work on the improvement of windows

window painting repair work are not limited, the question often arises of how to paint window frames. Everything is quite simple here: surface preparation is carried out in the same way, the color usually does not differ from the color of the window, although sometimes you can play in contrast.

Another question, how to paint the slopes on the windows, belongs to a slightly different area, because you have to finish the plastered surface, so you need a different paint, and the preparation of the base is fundamentally different. (See also the article How to plaster a wall: features.)

Let's consider in more detail how to paint the bars on the windows, if any:

• It is best to use a high-quality composition, Zinga conductive paint is suitable, which is different highest reliability, and if increased requirements are put forward to the building fire safety, then it is worth choosing Polystil fire-retardant paints for metal.
• Surface preparation is a very important part of the work, the quality of the coating largely depends on it, it is easiest to do this with a metal brush.

Advice!
For coloring hard-to-reach places construction, it is easiest to use a piece of foam rubber.

Of course, it is better to paint the grille in the removed form, but this is not always the case.

Conclusion

We looked at how to paint old windows to look like they were newly made. If you have any questions, watch the video in this article, where some points are explained in more detail.

Not all of our contemporaries unanimously rushed to acquire standard plastic double-glazed windows, some prefer safe, natural, wood-made structures to them. Modern wooden windows there are many advantages in addition to environmental cleanliness: reliability, durability, high quality workmanship. At the same time, regular care is required for such frames, in particular, wooden windows need to be painted. Of course, if you have chosen some of the best wooden windows, then this task will not appear before you soon, but if your windows are several years old, it's time to start thinking about maintaining their beauty and functionality.

• What is the best paint for wooden windows?
  • Paint for interior and exterior painting
  • The choice of paint according to its characteristics and composition
• How to paint wooden windows?
  • Materials and tools
  • Important points before starting work
  • Withdrawal rules old paint
  • Preparation of fittings and glasses
  • Puttying wooden windows
  • Priming wooden windows
  • Multi-layer painting of wooden windows

But before you paint wooden windows, and even with your own hands, you need to stock up on all the necessary tools and materials in advance.

What is the best paint for wooden windows?

The first question is, which paint is better for wooden windows? Suitable paint for wooden windows must meet the following requirements:

• be moisture resistant to protect wood from fungus and decay;
• be elastic so as not to crack when the frame shrinks and swells;
• be "breathable", because the wood after processing must retain the ability to let air into the room, due to which a healthier microclimate is created there.

Paint for interior and exterior painting

Interior window painting

Oil-based alkyd paints meet all the requirements regarding which paint is best for painting wooden windows. They are quite elastic and durable, in addition, they give the surface a great look.

But with alkyd paints, the frame is best painted from the side of the room.

Painting windows from the street:

If the question is being solved, what is the best way to paint wooden windows from the street, then in this case it is better to stop at nitro paints or acrylic paints. They dry quickly, without a strong smell, give a very durable coating. These are also suitable for window sills.

Universal Paint:

For those who do not want to get confused about what is better to paint wooden windows from the outside, and than from the inside, and prefer the use of a universal composition, atmospheric glossy enamel should be recommended.

Some people can't decide what color to paint their wooden windows with. Our climate is characterized by significant temperature fluctuations, variable weather with precipitation. In such conditions, Caparol, Remmers and Dulux water-based alkyd enamels and acrylic paints have performed well, although they are quite expensive. You can also choose cheaper domestic counterparts.

The choice of paint according to its characteristics and composition

Besides, wooden surfaces can also be painted with traditional oil, enamel and adhesive dispersion paints. To finally decide which paint to choose, you need to think about the features of the conditions in which the painted surface will stay, the humidity of the atmosphere, and the properties of the surface to be painted. The cost of a particular paint also depends heavily on the composition of the composition and its operational properties.

Acrylic and polyurethane paints

Acrylic and polyurethane enamels and varnishes are considered the most modern and technologically advanced. All of them contain organic solvents, which make them more toxic, but also more stable. The most promising in terms of durability are polyurethane paints, which provide the most wear-resistant coating, so at the moment they are - best coverage for wooden windows. But still, acrylic paints are used more often for doors and frames, which are more affordable. After drying, which occurs very quickly, they are no longer afraid of water. Acrylic can be diluted with water and tinted to desired shades. Of course, they should not be confused with acrylic paints for artists, which are available in small tubes.

Alkyd paints

A good option when choosing the best way to paint wooden windows can be alkyd paint, since it is not only resistant to various manifestations of atmospheric adversity, but also to mineral oil or detergents. Pre-primed and coated alkyd paint surface 4 years will retain its appearance. It perfectly tolerates extreme heat (+60) and extreme cold (-50).

Nitrocellulose paints

The right option for what paint is better to paint wood window structures maybe nitrocellulose paint. True, the solvent in it is acetone, which evaporates very quickly, so the room should be intensively ventilated. This paint is very flammable.

Recently, the owners of wooden windows have increasingly begun to cover them with transparent varnishes, which allow you to save all the magnificent texture of wood. At their core, such transparent varnishes are the same alkyd enamel, in which a coloring pigment is simply not added.

How to paint wooden windows?

Before processing wooden windows before painting, you need to consider that different breeds wood require different processing:

• pine must be impregnated with compounds that protect it from grinders and getting wet;
• oak windows are not afraid of moisture, but insects love to feast on them;
• larch does not need treatments that are used for either pine or oak, since it does not rot and is avoided by grinders.

Materials and tools

A master who knows how to paint wooden windows correctly will first prepare not only the paints and brushes themselves, but also some tools and consumables.

It is quite obvious that before painting wooden windows with peeling paint, you need to remove all this paint from the surface, as well as various foreign objects sticking out of the frames. Therefore, when working, you may need a variety of tools:

• screwdrivers and pliers are needed to remove various screws and nails from the frame;
• it is convenient to remove old paint with a small spatula;
• you will also need a small hammer to install the glazing beads in place, because the latter will have to be temporarily dismantled in order to remove the glass from the frame;
• sandpaper will have to clean the surface;
• so that the slopes do not get dirty during painting, they must be temporarily sealed with masking tape;
• brushes are needed to apply paint, and if the frames are quite wide, then they can be painted faster with a roller;
• jars or trays for paint;
• a crowbar or a small nail puller will be needed during the dismantling of glazing beads, as well as sashes and vents;
• also worth preparing rubber spatula, a fine mesh for straining the putty and the putty itself on wood. The fact is that chips, cracks or dents are often found on old frames, which can be successfully leveled with such putty;
• antiseptic impregnation for wood;
• an effective solvent for used paint in case you need to quickly remove a misplaced stain.

If the painting of old wooden windows will be done with acrylic paint, then a color scheme may also be required (if the paint itself is white and its tone needs to be corrected with a dye). But if there is no tinting experience, then it is better to immediately buy the desired shade.

Important points before starting work

In order for wooden frames to last longer after painting, you need to choose the right time for work.

It is best to do this on a warm day, when there is no bright sun, but the humidity is low, then the ultraviolet will not destroy the dye. Wooden frames will dry already at a humidity of less than 80% and a temperature of only +5 degrees.

Paint should not be applied to damp wood, otherwise bubbles will come out and the frame will have to be repainted.

In addition to dampness, poor surface preparation also leads to paint peeling. If the windows are painted indoors, then before starting work, it is necessary to clean it up there so that dust does not settle on the frames.

Rules for removing old paint

It has already been mentioned above how to prepare wooden windows for painting - first of all, remove the old paint:

1. You should arm yourself with an industrial hair dryer or blowtorch and try to heat the surface of the frame with them. If the paint begins to peel off when heated and can be easily removed with a spatula, then this means that good way its removal.
   If the paint does not give in, then it remains to work hard with a spatula and a chisel or soak the old paint with a solvent. In this case, you will need a scraper and coarse sandpaper.
2. If the frame is difficult to close, then the “conflicting” surfaces should be sanded with a grinder. The latter must be handled delicately so as not to damage the frame material itself.

Video on how to remove old paint from wooden windows:

Now, to remove old paint, they began to produce special liquids that significantly speed up the preparatory process. These include Ukrainian "Svema" or "Shostka" or Finnish from "Tikkurila". It can be found in auto shops as it is used for cars. The liquid must be applied and wait until the paint begins to wrinkle and turn into something curdled, which can be easily removed with a spatula and then rubbed with coarse sandpaper.

Preparation of fittings and glasses

Preparation for painting involves the dismantling of window sashes and fittings, then after restoration the window will look neater. In addition, at the same time it will be possible to replace or repair faulty elements. If the locks and handles do not want to be easily removed, then they can be wrapped with masking tape, protecting them from paint.

Glass should be prepared no less carefully, especially if wooden windows with double-glazed windows are being painted. For beginners, it is better to cover the entire glass area with newspapers, fixing them with masking tape 2 mm from the edge of the frame, so that the paint fills these cracks and does not allow water to accumulate in them later. For experienced craftsmen, one adhesive tape glued along the edge of the glass is enough.

It is better not to reuse old glazing beads holding glass. New glazing beads must be sanded, primed and painted separately from the frames, and in this form already nailed into place.

Puttying wooden windows

Some people who know well how to paint and prime a wooden window use old recipes, mixing rosin or wax with turpentine. The rest is better to rely on ready-made formulations, which, fortunately, are always available in specialized stores, where you can find a variety of base paints, primers, solvents, finish varnishes and paints. Putty for wooden windows for painting should be specially designed for wood, it is usually acrylic and packaged in 200 g cans.

The most promoted brand in our country is, perhaps, Tikkurila, at least on the forums it has received the most positive feedback from consumers. But they also note its "biting" prices. TO well-known brands can also be attributed to "Tex", "Pinotex", "Zawosan" and a number of others.

The procedure for puttying wooden windows is as follows:

1. Before puttying wooden windows for painting, the frame must be carefully inspected. All elements made of iron (steel hinges, stud caps, etc.), which can rust over time and spoil the look of the window, should be pre-treated with a special primer for iron.
2. An important milestone preparatory work is the treatment of wood with an antiseptic, thanks to which the structure will be protected from decay and the spread of fungus, will not allow insects to settle in the frames, and in general will extend the life of the frame.
3. Having processed the frame with an antiseptic, you need to re-examine its surface. There will certainly be potholes, bumps, cracks that need to be puttied. This should be done gradually, in several approaches, because if you immediately apply a thick layer of putty, then it will then easily fall off along with the paint layer and the entire repair will go down the drain.

1. On the surface of wooden frames intended for painting, putty is applied in a regular layer. If the frame is processed with a stain, then the puttied places will look through it, so the putty must be tinted exactly to the color of the wood. Putty can even be prepared independently from wood flour and epoxy resin or glue.
2. After applying the first layer and hardening of the putty, its surface must be treated with sandpaper.
3. Then a second layer of putty is applied and a few hours after it dries, the surface must be treated with sandpaper in the same way.
4. These operations must be repeated until a perfectly flat frame surface is formed.

Useful video on preparing a wooden window for painting:

Priming wooden windows

This procedure is necessary to ensure high-quality and reliable adhesion of the paint to the surface. A modern primer forms a transparent protective film that allows you to preserve the appearance of the natural pattern of the material. In addition, modern primers have antiseptic properties, therefore they protect the entire frame (especially the outside) from rotting, mold and swelling even in rainy weather. The primer composition includes oil, glue, resin and coloring pigments.

The formulation of the primer mixture can vary significantly, however, all mixtures for wood must certainly preserve its natural structure. That is why a metal primer is not used for wood.

It is quite simple to determine which primer is needed in a particular case:

• For water-dispersion paints, you should choose an acrylic-based primer, the composition of which resembles that of a paint.
• Under the enamel, you need to apply alkyd drying oil.
• It is useful to treat the windows with wood stain with protective properties for wood, the solvent in which is white spirit.
• Then the wood will absorb less moisture, and grinders will not start in it.
• You can also find putty that has the same shade as the wood itself.

The surface before the primer must be degreased with white spirit, if it has not been previously puttied. It is better to prime not with a roller, but with a brush.

If the putty has not dried completely or some area was missed during the primer, then dark spots often form in these places after painting.

Multi-layer painting of wooden windows

After the procedures described above, the window becomes even and smooth. Next is the painting process:

1. Before painting, the room must be carefully cleaned, especially from dust so that it does not settle on fresh paint.
2. Having opened a can of paint, the contents must be thoroughly mixed and strained into a bath through a special sieve.

Many neglect this and smear the paint taken directly from the can. But the paint is usually sold too thick and requires pre-dilution. If you paint with undiluted paint, then too thick a layer of it is applied, so it is distributed unevenly, with sagging and traces of the bristles of the brush. After drying, such paint will begin to crack faster.

1. The degree of dilution of the paint is determined only empirically, but one should strive to ensure that the applied paint layer is uniform, however, does not flow like water.

It is not necessary to dilute all the available paint at once, but pour some of it into a separate container and bring the solvent there to the required consistency.

1. About which is better to take a solvent for paint or primer, you can ask the seller or carefully study the text on the package.
2. The first applied layer of paint should be the most liquid, since it should penetrate as deeply as possible into all the irregularities of the wood structure.

1. After applying the first layer of paint, it must be allowed to dry completely and only then proceed with the application of the second layer.

Usually painting wooden windows on the outside is carried out in three layers, with reinsurance, although with good paint and surface preparation, two layers may be enough.

1. The paint for the second and third layers should be thicker so that it does not form streaks. If streaks still appear, then they must be removed immediately using a rag moistened with a solvent. If you delay with this, then the paint will dry out and the entire surface of the frame will have to be cleaned and painted again.

During operation, the brush should not be dipped into the paint entirely, but only halfway, and the excess paint should be removed by gently brushing along the edge of the container.

Painting should start from the outside of the window.

1. It is necessary to take care that there are different brushes at hand: for even wide surfaces more, and for hard-to-reach areas - smaller. The width of the brush can be in the range of 3-5 cm. Frames should be painted with flat, not round brushes, they will ideally distribute the paint along wood fibers. And it is better to paint over the corners with light, concise strokes of the tool.

1. By the way, newspapers and adhesive tape must be removed from the glass before the paint is completely dry, because if you tighten it with this, the paint layer can be damaged later.
2. Then install the previously removed fittings in place, but after the paint has completely dried.

Having learned all the most important nuances of painting wooden frames, the reader himself can decide whether to do it on his own or still turn to the services of professionals.

What paint do you choose for painting windows, and why? Tell us about your choice in the comments, and explain it - in communication with other builders, truth is born!

If you decide to paint a wooden door yourself, then you can easily do it, having available necessary tools. They must be selected depending on what material the door is made of and on the damage it has.

When the door is completely made of wood, in addition to adding veneer, MDF and cardboard, then painting wooden doors in this case is the most simple option and it is allowed to boldly do it with your own hands.

In this case, the painting process will consist of the following steps:

First you need to carefully examine the door, and near the discovery of any visible defects on it (peeling of paint, chips, etc.), it is suitable to first prepare door leaf. This operation can be performed exactly with the door installed or removed from the hinges. To make it more comfortable, you should remove the handle from the door before starting work.

After that, you will need to use a spatula to remove particles of paint that have begun to peel off, after (a year) you should walk along the door with a “sandpaper” to remove smaller peelings. P you need to use wood putty to eliminate all the holes that are on the door leaf. The layer of the applied putty should not be stronger than 1 mm, and if the defect has a greater depth, it is necessary to bring the putty in several layers. Each subsequent layer can be applied only after this complete drying of the previous one. When the putty dries, it must be sanded.

In an hour, the prepared door leaf will be ready, it needs to be primed (the primer should be produced by the same company as the paint, which the door will then be) and covered with a layer of paint. In order to avoid stains, it is better to use an airbrush or roller, and not a brush.

veneer door

Self-painting of wooden doors, which has a layer of veneer, is very similar to painting an ordinary wooden door.

Sermyaga, while you need to remember one exception. Quite often, at such doors, the key in the lower part may partially peel off during operation. Therefore, at the beginning it should be very carefully, without breaking, separated from the entire surface of the door, after some time, grease the wrong side of the veneer and the door leaf with special glue intended for (types of wood, and clamp it well with clamps. You can also lay pieces of plywood on top otherwise boards in order to to ensure an even and tight fit of the veneer.It is necessary to carry out these operations on a removed and horizontally laid door.

When the paste is completely dry, you can start painting the door, for which it is better to use Pinotex wood protection and tint compositions.

In order to get a colorless color, it is necessary to paint the door leaf several times, but remember that each next layer of paint can only be applied after the previous one has dried.

The paint can be applied with a roller or brush. In order, then) to give the surface of the door a shine, it is necessary to cover it with a layer of varnish.

Wooden opening from the bars

The staining process will be slightly different if you need to individually process the door from the bars. Such doors should not only be decorated, but also necessarily covered with two or three layers of varnish, sanding each pericambium of varnish before applying the previous one. This technology will help you end up with a philosophical layer of varnish, despite the fact that the door itself was (small spotted, as it was assembled from separate bars that have different sponginess and, as a result, different absorption of the coloring composition.

Painting platbands and door frames

Obviously, many people know what to shoot door frame it just won't work, unless it is then replaced. Therefore, you will have to sand and paint it right on the spot. In order to avoid staining adjacent surfaces during the painting process, it is necessary to first seal them with masking tape.

The paint should be applied with a small roller or brush, and there should be as many layers of paint as on the door, so as not to end up with a different shade.

In order to paint the architraves, they can be removed beforehand to facilitate the painting process. They also need to be sanded first and then covered with several coats of paint.

In the book, if you varnished the door, you need to remember to do the same with the platbands and the door frame.

Box replacement

He knows enough when restoring the door, it becomes clear that it will not only have to be painted, but also to change the door frame (for example, if there was an illiterate threshold before, but now it is needed). In this situation, it will be necessary to saw off the bottom of the door leaf by 1 cm using hand saw on wood. (a year) after this, the cut must be sanded, and only after that the door can stop being covered with paint.

The new door frame should also be painted with the same paint. At the same time, the number of layers when painting the box, if you like, will be more than on the door, since its initial light will differ from the color of the door leaf.