How to sew a camping shower booth yourself. Shower for a summer residence portable with heating. Types of camping showers

Hygiene procedures should be carried out every day, and not rarely and several times a day.

But some people love to travel, and traveling isn't just about trains, hotel rooms, and resort pools. Some prefer to climb the wilds, where there is no smell of civilization. In this case, a camp shower will be useful.

It will be useful not only for tourists. Surely such a device will come in handy for some other categories of people:

• lovers of long-distance car rides;
• admirers of outings with an overnight stay;
• drivers of heavy trucks specializing in long hauls;
• other.

Such an adaptation will be useful to everyone who periodically or from time to time finds himself in a place far from the benefits of modern civilization.

Design Options

There are an infinite number of ways to build a camping shower from improvised means with your own hands, the number is limited only by your imagination and available materials. All designs differ in the way water is injected. It can be supplied due to the height difference (for this, the container must be placed above the person’s head), due to the injected air pressure, or by banal pumping.

The easiest way is to collect warm water in a container, raise it with your own hands to a height of 2-2.5 meters (put it on the roof of the car, attach it to the body, hang it on the bough of a tree), then lower the hose with a divider nozzle into the neck and force it with simple manipulations water flow over your head.

The pressure will be weak, but sufficient to fully wash and at the same time spend a minimum of water.

The method requires a minimum of additional investments, it is not even necessary to buy a watering can divider. But the comfort of the method leaves much to be desired, so it makes sense to consider other options.

A more convenient option is a toptun camping shower. To supply water, a simple mechanical pump is used, driven by the muscular strength of the legs. Here the pressure and productivity are higher, the container does not need to be raised, so the use is more comfortable. However, when washing, you will also have to dance. Such a design can be purchased ready-made or assembled with your own hands, taking a car pump as a basis.

Another way is to create a design based on a small water pump. On sale there are small models of low productivity that are powered by direct current 12 volts. If you can't find one at a pet supply store (aquarium accessories section), you can get a suitable pump from an auto parts store, such as the one that fits in the washer reservoir.

You will also need a power source capable of delivering a current of 3 A. A car battery or generator, as well as some models of uninterruptible power supplies, are capable of this. For convenience, a simple switch like a doorbell will not hurt: pressed - it works, released - it turned off.

This will not only reduce water consumption, but also increase the resource of the water pump, which is not designed to work for a long time without interruption. It is also important not to forget about the power cable and hose. It is better to take a small watering can, you can seal some of the holes, because the pressure of the pump is small and it cannot provide a large flow of water.

To connect to the battery, you will need a plug or terminals. For convenience, a shower tent or just a screen does not fit, because far from everywhere you can find a secluded place for ablution.

Thus, in total for the construction of such a structure you will need:

The most expensive element is the tent, but it can be easily replaced with a cheaper improvised screen.

The table does not include a power supply, because its price is highly dependent on baseline. Someone can be powered by a car battery and he doesn’t need to buy anything at all, and someone might want to buy a hiking kit. solar panels with a battery to wash in the camp in the middle of the wild forest.

To assemble the structure with your own hands, you will also need electrical tape, a screwdriver, a clerical knife, but in general there is nothing complicated:

An additional advantage of using a car pump is low voltage, so you should not be afraid of electric shock. However, just in case, you can protect yourself from surprises by placing the power button in a sealed package.

conclusions

If you wish, if you have a small share of ingenuity, if you want to work with your own hands and if you are not lazy, you can very quickly build a structure from the materials available to everyone that will allow you to perform ablutions in any conditions, even where there is nothing for this.

You can also use ready-made solutions. A camping shower is easily constructed based on the designs of toptuns and other varieties sold in stores.

In our time, it is not at all necessary to relax in nature or while traveling to deny yourself such pleasure as bathing in the shower. After all, you can find a camping shower on sale - 12 volts from the car will power the water pump, so you can wash yourself. And for backpackers, compact portable devices are offered that are completely non-volatile, and below we will get acquainted with all the most common types of camping showers that will make your stay in nature more comfortable and enjoyable.

Types of camping showers

Depending on the type of construction, all existing types of showers can be divided into several types:

• Portable cabins with tanks;
• Portable containers without booths;
• Shower pumps.

Below we will take a closer look at all of the above types of devices.

Camping cabins

A camping shower cabin is a collapsible structure covered with an awning like a tourist tent. This option is an excellent choice for people who like to relax in nature for a long time "savages". In addition, camping cabins are widespread among summer residents who visit a suburban area in the summer.

As a rule, such booths are equipped with tanks of 20 liters or 40 liters. Some models are equipped with a pump for pumping water into a container from a source, such as a bucket or even a reservoir.

Most often, the heating of water in the tank is carried out in a natural way, i.e. due to the energy of the sun, or the container is filled with preheated water. True, on sale you can find tanks with electric heating. They are more comfortable to use, but their disadvantage is volatility.

Camping showers usually weigh 2.5 - 3 kg, and when assembled, the product takes up little space, which is especially important for travel lovers.

Advice!
When choosing a camping cabin, you should pay attention to its equipment.
Often, a clothing rug and other accessories are attached to the product.

Portable containers

Portable shower tanks are the most simple devices, which consist of only two main elements:

• A 25 liter tank, usually soft, made of PVC.
• Hose with sprayer.

To use such a device, you only need to hang it with your own hands on a tree, pole or fix it in a booth. It should be noted that portable containers also come with and without a water heating function.

As for the volume of the tank, as a rule, 20-25 liters is enough for one person to bathe. The advantage of such products is the low price and minimum dimensions.

Shower pumps

A distinctive feature of these products from the above-described shower systems is that they do not require installation of a container at a certain height, since water is supplied to the watering can using a pump.

It should be noted that these systems are of two types:

• Electric, working from 12V- products were originally designed for motorists, so they can work from the cigarette lighter. The design is a small electric pump with a watering can. As a container for water, you can use any bucket, canister or barrel.
• Mechanical ("toptun")– This hiking shower is a rubber mat with two built-in pumps. In the process of bathing, a person steps from one foot to the other, resulting in water from under a certain pressure. The advantage of such a system is energy independence, however, such a device is less convenient in operation.

Note!
The instruction manual for the car shower implies its use from the cigarette lighter with the engine running.
Otherwise, battery discharge may occur.

In the photo - a mechanical shower "toptun"

Homemade design

If you don't have a portable shower device, then to accept water procedures you can make the simplest shower in camping conditions with your own hands.

For this you will need:

• Plastic bottle with a capacity of 5 liters;
• Wire;
• Hose;
• Curtain.

The design is made as follows.

• A hole is cut in the bottle cap and a hose is inserted. To fix it, on the inside of the cap in the hose, make a hole perpendicular to the walls of the tube and insert a nail or wire.
• Then in the bottle you need to cut the bottom and make two holes in the walls.
• Next, you need to make a handle or hook from the wire and fix it in the holes, which will allow you to hang the bottle on a tree branch.
• Then, at the tip of the hose, you need to make a hook from the wire, which will allow you to cling to the wall of the container and thereby block the water supply.
• After making the shower, you just need to hang a curtain, which will allow you to hide from prying eyes.

You can also make a do-it-yourself shower with a pump like a “treadmill”.

For this you will need:

• Car foot pump;
• Hermetically sealed container;
• Hose, preferably with a shower head.

Now let's look at how to make a shower on a hike with a foot pump:

• First of all, you need to cut two holes in the container lid and insert the hoses. Moreover, the connections must be tight, so rubber gaskets or other seals should be used.
• Then a car pump is connected to one hose, and a shower head to the other.
• After that, you need to fill the container with water and you can check the device in action. In order for water to enter the watering can, you need to perform several strokes with the pump.

This design is more complex, however, more convenient to use, especially if you use the shower together. In this case, one person can take a shower, and the other can pump water with a pump.

Conclusion

Portable showers can significantly increase the comfort of outdoor recreation or travel. Moreover, they can be both extremely simple containers with a watering can, and folding showers. True, as we found out, in the absence of a portable shower, you can make a bathing device yourself from improvised means.

From the video in this article you can find some additional information on this topic.

A modern resident of a metropolis does not consider it possible for himself to give up his usual household amenities. Leaving for a dacha or just for a picnic, he does not want to sacrifice any comfortable conditions. Not to mention important hygiene procedures. But not always outside the city there is an opportunity to swim normally. The demand for devices for water procedures in a mobile version is great. And if there is no ordinary bathroom in the country house, with all the necessary attributes, you can always take a portable shower with you to give a portable one, thereby compensating for the absence of its stationary counterpart. What attracts buyers to this product:

• Price. It is worth a portable shower for giving and at home inexpensively. Behind minimum costs the owner of this device gets the opportunity to fully swim.
• Small size. You can take it on any trip without much difficulty, it will not take up much space in the trunk of a car. Yes, and you can store it in the country simply by putting it on a shelf, putting it in the back room or in any free space.
• Mobility. This was one of the main tasks in production. Make a portable camping shower capable of your own small size and ease of use not be an extra burden for the user.
• Autonomy. Full independence from surrounding circumstances is realized. No additional fixtures or devices are needed. You can install it whenever and wherever you want. There is no need to use any tools.

Types of portable showers and their installation

Products differ from each other in price, performance characteristics and a set of options. All of them are maximally adapted for easy installation and are easy to manage. They can be divided according to the principle of work and into two main types:

• Products with natural heating. The easiest option. The container is filled with water and heated sunbeams. The case provides constructive solutions for quick installation. A hook that resembles an analogue of a regular hanger and a hole through which a portable shower can be hung. For this, a tree branch, any structure made of wood, plastic or metal, of sufficient height, is suitable. The range of these products is represented on the market in large quantities. For example, the portable shower Camp Shower, which is prominent representative of this kind.
• Products with forced heating. It is very practical and convenient to use them in the cool season or in cloudy weather, when it is not possible to heat ordinary portable summer showers. Necessary condition is access to the household electrical network. By immersing the device in a container of water, and turning it on, you can immediately use it. A very successful model of this class is the Fanline TJ-2000 portable shower water heater, which is fully capable of replacing its analogue familiar in urban conditions. When placing the device in a container with water, to a depth of no more than 1 meter, it should be remembered that part of the liquid will be replaced (1.6 liters) by the device, so small tanks or buckets should not be filled to the brim.

Convenience and ease of use were appreciated by the owners of these devices. It can be used not only in the country, but also as a portable shower for a hike, where it can be very useful. The lack of electricity forces us to abandon heated products, but there are very interesting models that are ideal for individual use in unsuitable places.

For example, a portable shower "toptun" does not even have to be hung somewhere. The water supply will be provided by a pump built into a special mechanism. Stepping from foot to foot, the user puts it into action. Two pistons create the necessary pressure to supply it to the hose. By the way, this design was appreciated by motorists who are happy to use it to wash the car. Ideal output in the absence of electricity and water. Fill the container with warm water and use the device where necessary.

Products without forced heating have a dark body to effectively absorb the heat energy of the sun. If such a shower is filled with water and hung up, then in sunny weather it will be possible to use it in a couple of hours. If the container is placed on a hot surface (concrete, asphalt, metal), then the time will be reduced. The standard capacity that comes with a portable shower is 20 liters, which is enough to use it for up to 10 minutes.

If you plan to travel by car, then it would be wise to purchase a heated portable shower that is powered by a car "cigarette lighter". In this case, warm water will be guaranteed anywhere and at any time of the day.

A camping or recreation area on the site will be much more comfortable if you install a good portable shower for a summer residence with heating and equip it with a light cabin made of synthetic fabric on a metal frame. As a rule, a place is provided inside for fixing the hose. The throughput of such a design is high, and it is capable of serving many people. There will be no need to leave the recreation area. The Fanline portable shower, which is available in various power modifications, has excellent prospects for these purposes.

In addition to the direct purpose, some models of this type of product are used for other purposes. For example, if you need to move liquid from one container to another. Or pump water out of the basement. These tasks are easily handled by a portable shower pump for a summer residence, which processes up to 5500 liters per hour.

Home craftsmen are often smart and use products of their own production. It's great when the owner is a jack of all trades. But it is strongly not recommended to make a portable water heater for a shower for a house and a summer residence on your own. Using heating elements or other similar elements operating from the network is dangerous to life and health. When designing and manufacturing original factory products, a large margin of reliability is laid. The connection scheme and design were worked out for a long time on experimental samples, until the designers were convinced that a portable shower with a water heater for giving this design could be put into series. In this case, inventing oneself is endangering not only one's own life, but also the health of relatives and others.

Unfortunately, not all summer residents and those who like to travel comfortably are aware of all the benefits that a portable shower gives. Feedback from grateful users will open their eyes to new opportunities and inspire them to purchase this wonderful product.

bouw.ru

A camping shower will never be superfluous :: SYL.ru

Walks in nature, night hikes, tent camps or just an unfinished dacha... What do these seemingly completely incompatible places have in common? One small nuance that is difficult to refuse for a person who is accustomed to the benefits of civilization. Namely - in any, as they say, Spartan conditions, it is impossible to accept water procedures. In a simple way, you can’t take a shower in nature or in unfinished infrastructure. Sometimes this becomes a problem that does not allow you to relax normally and plunge into the atmosphere of a real holiday. Without looking ahead, we can say: the problem is being solved! How? Another, no less interesting question.

Camping shower

Yes, what inventive people just do not come up with. Camping country shower is no exception. Why "dacha"? The fact is that often, looking behind the fences of gardeners, you can see a simple structure that is taken out every evening and brought into the house. That's why they called her the dacha. But the lack of benefits on a favorite piece of land does not limit the possibilities of the above invention. Hiking, long walks, overnight stays - such a necessary thing as a camping shower can come in handy everywhere.

An easy choice

The needs do not go unnoticed, so the "smart" Chinese have learned how to mass-produce these designs. A camping shower can take any form, for every taste and for every preference. Need a closed type - please. The tent with a built-in tank is already ready for use. It remains to pour water. Ten, fifteen and even twenty liters are at the disposal of a clean traveler. There are also lighter designs: a frame with cellophane curtains, at the top of which you can see a small barrel. A camping shower of this type has no disadvantages. Among the advantages can be considered lightness and low cost. All of these options are good for hiking and commuting, but it begs the question, “Why buy?” It's no secret that the need for invention is cunning. Don't pay money for something you can build yourself. For example, you can make a camping shower with your own hands. He will perform his functions as well as his commercial "brother".

How to make a camping shower with your own hands

You should not reinvent the wheel in this matter, everything has long been invented and tried. There is only one task - to make a good do-it-yourself camping shower, which should have such properties as ease of construction, low cost (it is desirable that all materials for the construction are at hand) and relative comfort.

First building

How to make a camping shower when there is almost nothing around, only nature itself? It doesn't matter, simple options will always find their use. Everything ingenious is elementary. The same can be said about the designs of the soul. The first thing that comes to mind for such a case is plastic bottles. Yes, there are no limits to fantasy. To build a camping shower from plastic bottles, a lot of material is not required. First and foremost is capacity. The bigger it is, the better. After all, the water will flow longer, which means that the soul will be enough for a leisurely bath. Ten or five liters with proper and rational use enough. So, there is an eggplant. We need to start building. This option will be the most comfortable, so you have to work. An empty container should be placed just above your own height. Otherwise, when taking a shower, you will have to bend down, which is not very pleasant. But here it is important not to overdo it, otherwise the procedure for filling the eggplant with water will take a lot of time and effort. In the "shower" capacity you need to make a small hole. Water will flow out of it. You need to insert a small hose into this hole, it will be easier to take a shower with it. There will be no need to wriggle in front of the jet. It is desirable to process the joints well with resin or plasticine so that water does not seep through. The first do-it-yourself camping shower is made. Of course, you can add something of your own to it, it's up to fantasy.

Second building

There is the most reliable and proven method, which, probably, everyone used. This is a bucket. No, you should not pour it in one gulp: there will be little effect. This design needs to be redesigned. A couple of actions - and from the bucket you get a camping shower. For this design, you will need a few tools and materials: a drill, a large and long bolt, emery, a nail and a nut (of course, the same size as the bolt). So, in a bucket with a drill, you need to make a hole. If such a thin tool is not at hand, a hole can be made with a nail.
But it will not be neat, so the edges should be further processed with emery. It remains for small: to thread the bolt into the hole and not completely tighten the nut. Thus, a large washbasin turned out. Raise the bolt - water flows, release - water does not flow. This is very convenient, because the liquid does not run in vain, only when it is needed.

How to arrange a shower

Usually a camping shower is built for a short time. A day or two, no more. Therefore, many are not too worried about the arrangement of the structure. But when it comes to constant use, you really need to rely on convenience. For example, shower curtains. They will add home comfort. Curtains must be waterproof. The tape fits perfectly. How to fix it? Around the tree, with the help of branches, you can pull a rope, and hang a curtain on it. You should carefully examine the place near the shower. There should be no extra branches, needles, thorns, splinters and cigarette butts. Taking a bath next to garbage is not only unpleasant, it can be harmful to health.

www.syl.ru

video instruction on how to do it yourself, features of products with heating, water heater, pump, for hiking, price, photo

A portable heated shower will allow you to completely solve the problem of maintaining personal hygiene in a suburban area or in camping trip. Such equipment has several implementation options. In this article, we will look at the most popular ones.

Mobile shower photo

Kinds

You always want to take a refreshing shower at the end of a long day, no matter where you are. But if there may not be an equipped bathroom at the dacha, then on a hike you certainly will not find this blessing of civilization. Great solution This problem will be the use of one of the types of portable equipment for the appropriate purpose.

Option number 1: camping shower bag

Portable camping shower in action

This is the simplest and most common type of mobile shower. It is a sealed container made of polyvinyl chloride, equipped with an elastic plastic tube with a valve and a watering can, as well as a screw cap.

Specifications:

Tourist portable shower has the following advantages:

1. Ease of DIY use. It is enough to hang the container on the included plastic pipe and fill with water.
2. Mobility. After operation, the tank folds up, representing a small package that can be easily transported.

Comparison of a liquid-filled shower with the package in which it is folded

1. High heating rate of the filled water, which is 2-3 hours. This is largely due to the black color of the material from which the container is made.

Tip: if you plan to use the device in question in a suburban area where there is electricity, then you can purchase a portable shower equipped with a special water heater. Then the availability of warm water will not depend on weather conditions.

1. Multifunctionality. Excellent not only for hygiene procedures, but also, for example, for washing a car or dishes.
2. Acceptable price. The simplicity of the device guarantees its low cost.

As you can see, the portable travel shower bag is easy to assemble for a do-it-yourself hike and is easy to use.

Option number 2: portable shower "Step"

Portable "treadmill" for taking water procedures

"Toptun" is a very interesting device that is very similar to a pump.

Has the following structure:

Scheme of the design "Step"

Technical specifications:

Such features provide this equipment with the following advantages:

1. Simple instruction operation by one person. There is no need to hang the water tank to a great height, it can stand on the ground. It is enough to immerse the receiving tube in water and stand on a special platform for the feet, which, in fact, is a pump. By working with your feet, you will pump out the water and transport it to the watering can, which can either be held in your hand or fixed in a place convenient for you.

The use of "Toptun"

1. Durability and practicality. There is simply nothing to break in it.
2. Mobility. When folded, "Step" takes up little space and also weighs a little. You can take it with you on a hike or use it in the country. It is noteworthy that after you leave your suburban area, then you can either hide the device in a lockable hozblok, or take it with you, so that it will not become a victim of thieves.
3. Wide range of applications. Except in the country and on a hike, "Toptun" can also be useful in an apartment during a shutdown hot water. You can heat a liquid in a saucepan, place the appliance in a bathtub, supply a hose to the saucepan, and give yourself a full-fledged shower in this way.

Tip: when using "Step" in the bath, place a mat under it. This will prevent damage to the enamel.

Option number 3: folding cab

Portable shower cabin with dressing room

This is not quite a full-fledged shower, but still such a design is worth mentioning separately. It is a folding frame with a stretched waterproof material. In this case, the problem of comfort and privacy is solved.

But the watering process itself will have to be thought out separately, although you can easily use it in combination with the first two options, which in combination will provide you with a full-fledged bathroom on the road with all the amenities.

Also, you simply have the right to install such a structure in your country house and equip it with a plastic flat tank for a country shower cabin. At the end of the season, fold and hide from prying eyes. The main feature is that you do not need to build a capital cabin, which requires serious labor and financial costs.

Conclusion

A shower is needed both on a hike and in the country. To implement it, you need only one of the options for the simple devices listed above, in the assortment available on the shelves of specialized stores. They are simple and mobile in operation.

Adoption of water procedures in the field

The video in this article will introduce you to additional materials that are directly related to the topic discussed. A portable shower-water heater will easily solve personal hygiene problems anywhere.

hydroguru.com

Walking shower? It's simple!

Love to be in nature? Can't imagine life without hiking in your native land? Are you building a cottage while you have nowhere to wash? Or maybe you just like extreme sports? You will have to learn how to build a camping shower with your own hands. You can make it from almost any improvised containers. wash in warm water, in a warm room is not only pleasant: in cold weather, health can depend on such a shower. Even novice conquerors of nature can build a camping shower.

Building a watering can

The simplest shower is arranged like this. A curtain is attached to the tree (if you want to wash alone). A hole is made in the cap of a large plastic bottle, where a piece of hose is inserted. The lid itself is attached to the bottle with electrical tape (if there is a hose). If it is not there, then in order for water to pour, it is enough to unscrew the lid. For a large capacity, any thin hose is suitable, for a "one and a half" - a tube from a dropper. It must be securely fastened in the opening of the cover. To prevent water from flowing spontaneously, you can pinch the hose with a stopper or use a wire hook to attach the end at the top. Next - cut the bottom of the bottle, close the lid, strengthen it on a high branch. For convenience, you can place the bottle in a net or simply attach it to a branch with a wire. The simplest camping shower is ready. Instead of a plastic bottle, you can use an Esmarch mug, a heating pad, etc. Such a device is quite suitable for summer time. But what if you are on a hike, around the mountain and -20 ° C, but you really want to wash? Actually, it is the next building that will be what is called a “real camping shower”. Naturally, you can make it anywhere, but, they say, it was the climbers who came up with this method of hygiene.

We build a portable camping shower

Actually, only a curtain and a water tank will be portable. All other parts are assembled directly on the halt. We will need:

• Devices for kindling a fire.
• Boulders the size of a three-year-old boy's head, but a bucket of ordinary pebbles or other stones can also be used.
• Curtain.
• Plastic bottle with stopper and hose.
• A tent or film stretched over a frame. The frame can be carried with you, or you can build between trees.

In order to build a warm camping shower, we kindle a fire, put stones in it, and heat water over the fire. While everything is warming up, we mount a kind of wigwam from cellophane (if there is no empty tent). You can use branches, etc.
We make a mount above the wigwam: we will hang here plastic bottle(see device above) with water. When the stones warm up, carefully lay them around the perimeter of the "wigwam". This is the most dangerous part of the procedure: you can burn yourself. Boulders or pebbles must cool in the "wigwam" so that they can be stood on. In the process of cooling, they warm the air very much. Then we hang a bottle of hot water and ... with a light steam! Usually, stones allow 4-5 tourists to take a camping shower, and only after that the “room” begins to cool down. If you do everything quickly, and take more boulders, then even a group of 15 people will have time to complete the prescribed bath procedures.

fb.ru

Plumbing Tutorial Useful articles about plumbing, ventilation, water connection and drainage

Do-it-yourself shower: camping, country options and designs in

At the time when it comes to the manufacture of such a structure as a shower, in most cases, the craftsmen imagine a booth with a pallet connected to the water supply, or on which a water tank is installed. But, if the finished product cannot be found, then you have to use any improvised material or products with a different purpose. Based on this, the question of how to build a shower with your own hands, using the maximum number of elements required for this, is also fascinating to skilled experts.

hiking options

Going to rest in nature, a person tries to provide himself with great comfort on the spot. Along with this, you do not need to carry a large number of things with you, and when loading the car there are a lot of necessary items that you need to take with you. Based on this, a typical tourist shower should take up minimal space, be light in weight, or be made from existing items with a different purpose.

Shop designs

Of all the existing models of systems for a similar purpose, it is necessary to emphasize only one. It has the form of a simple tight package, to which is attached a small valve with a detachable watering can and a hatch with a lid for filling. Along with this, it is worth emphasizing that the price of such a design is small, and it takes up minimal space, actually weighing nothing.

Such a product is filled with water and hung on a tree. After that, opening the valve, they begin to use it as a simple shower. It is worth emphasizing that the instruction manual also allows the use of warm water, but any specific model has its own tolerances.

Given the features of such a design, it can be attributed to the marching one. Along with this, it is possible to create a similarity of this device yourself, using a tarpaulin or film.

Advice! A similar system can also be used for the transport and storage of drinking water. Based on this, the need for her in campaigns is obvious.

Homemade products

Most tourists make an elementary shower from a canister with their own hands, along with this, without damaging the product. It is enough with an additional cover, in which holes are made in advance. It is put on after filling with water and used as a watering can.

In addition, it is possible to use huge plastic bottles or other similar containers. But with a strong need, it is easiest to use a kettle, on the spout of which they put watering cans and hang it on a tree. Such a shower in nature with your own hands can be built in a couple of minutes.

Advice! There are quite a few ways to organize the supply of water from a height, but it is possible to spray a jet only from a watering can. Based on this, it is worth taking with you.

Country designs

Creating a shower on the site with your own hands, you have to face a number of troubles, decide which ones you need, taking into account the terrain and the expected level of comfort you need. Based on this, the manufacturing process should be divided into stages.

Pallet

• The easiest way is to make a pillow with crushed stone and sand, on top of which a wooden pallet is installed. So in most cases they make a shower in the village with their own hands, assuming that the drain will go straight into the ground.
• In addition, a fairly common method of manufacturing cement base. It is possible to fill it yourself or use a ready-made plate for this. Along with this, it is mandatory to make a bias towards the proposed drainage system. Some masters to simplify the work of stones, which are tamped into the ground.
• If a shower is made by hand, then it is possible to use every available materials. The main thing is that it was easy to walk on them, in addition, in the presence of water, and it was possible to organize a drain.

Advice! The outflow of water must be done so that the liquid goes into the ground, and not under the foundation of the building.

Tank

• At the time when they make a shower in the yard with their own hands, then it’s worth thinking about what kind of container you need to use for water. This is especially important if it is not possible to buy a regular tank.
• Immediately it is worth emphasizing that the barrels in which they used to be chemical substances or petroleum products are not suitable for these purposes. They may leave a residue that will later dissolve in water and can lead to poisoning of the body.
• In addition, open containers should not be used. Sick birds or their waste products can get into them.
• The easiest way is to make a do-it-yourself shower from a eurocube, because this container is excellent in all respects and at the same time has a sufficient amount. But you need to take into account the enormous weight and use strong supports during installation.
• A tank for similar purposes is selected very scrupulously, because this is the base of the entire structure and it will depend on it appearance frame.

Advice! It is quite simple to install a tap with a watering can on the container, but you should not forget that it is better to use a screw or needle locking mechanism. These systems allow you to precisely adjust the force of pressure, which significantly increases the level of comfort.

fencing

Some masters prefer to create the simplest overlaps using a simple film. But, if a do-it-yourself solar collector is made for a shower, it is assumed that the structure will be in the open air and light will penetrate through it. This leads to a certain discomfort for some people, because the interior space will be viewed.

Given this feature, experts advise using profile pages or moisture-resistant plywood. In addition, dry reeds are suitable for these purposes, which are tied together, creating a full-fledged overlap.

Advice! Sometimes dilapidated building materials are perfect for such a task. But they need to be put in order and subjected to protective treatment. A simple paint may work for this.

Structures in the apartment

Sometimes such situations arise, at a time when you need to equip a shower in an apartment, but along with this there is no way to install a cabin. Then it is possible to use intentionally created designs or non-standard technical solutions.

Bath

The easiest way to install a shower in the apartment with your own hands, if it is placed in the bathroom. It is possible to use the bowl itself as a pallet, but along with this, in the places of its contact with the wall, all joints must be sealed using sealant. In addition, it is assumed that the installed faucet will have a shower head that will be able to be fixed on the wall.

Then you should buy a special fence or curtain that will protect the room from splashes. Along with this, it can completely cover the entire perimeter or only the bath, which is located a meter from the mixer.

Advice! Such solutions are quite simple, because they were used in a very distant past and some companies develop a lot of products for them. But when choosing them, you must be careful so that all the elements are perfectly combined with each other into a single system.

Toilet

In addition, in our time there are still apartments in which there is no room like a bathroom. In addition, the environment is seen at a time when people buy a dorm room and want to take personal comfort while saving space. Based on this, in such cases, a shower room is made in the apartment with their own hands, but it is connected to the toilet.

First of all, in similar situations, you need to drain. Along with this, a branch is cut into the sewer pipe, which is walled into a floor screed with waterproofing, making it look like a storm drain at an angle. Needless to say, the level of the threshold and the floor will rise very much, but this is a necessity that cannot be avoided.

Then just install a mixer with a shower head on the wall. In such a room it is possible to take water procedures normally. Along with this, the closed toilet seat will serve as an unusual chair, which is quite convenient for some people.

Advice! Such a solution can be called extreme, but in certain specifications it is the only one. But if it is possible to use just the cabin, then it should be used.

Conclusion

After reviewing the video in this article, it is possible to study in more detail these designs and the principle of their manufacture. In addition, taking the text above as a base, it is worth concluding that, in fact, in arbitrary conditions, human ingenuity allows you to create designs that can significantly expand the level of comfort.

Along with this, making a shower with their own hands from improvised materials, the masters take into account all the wishes of future users. This gives rise to the most extraordinary designs with fantastic designs and technical highlights.

uchebniksantehnika.ru

do-it-yourself device and methods of making

This device for taking water procedures in our country appeared relatively recently and immediately attracted the attention of users.

Do-it-yourself do-it-yourself shower

What are the advantages of a trampling shower over conventional devices?

CharacteristicsShort description

Small size and weight	The total weight of the shower-treadmill does not exceed 2-3 kg, the dimensions, depending on the model, are not more than 30 × 40 cm. Such linear indicators allow you to constantly carry the device with you and use it at the right time.
Mobility	There is no need to build special rooms for a trampling shower. The watering can can be held in hands, hung on a tree, attached to a wall, etc. If necessary, the location of the shower can always be changed. If desired, the shower can be connected to a large barrel of water and used permanently.
Application versatility	The device can be used not only for taking water procedures, but also for watering beds, washing a car and other household needs.
Reliability	The toptun shower does not have complex parts, which can significantly increase the service life. In addition, it does not require periodic maintenance and repairs. If there are risks of contamination, then an elementary strainer can be installed on the inlet pipe.
Ease of use	The pump pumps water without electricity, it can be installed in the country and connected to a large container of water - the time of taking a shower increases significantly. The stomp shower has proven itself at picnics by the pond, you can take it with you on hikes.

How to use the stomp shower

Shower toptun: scope

Before Considering Options self-manufacturing soul-stomper, you should find out the principle of operation of the device, such knowledge will help you choose the most successful option, taking into account the experience of plumbing work, financial capabilities and the desired technical characteristics.

The device and principle of operation of the shower-treadmill

Shower-toptun consists of the following elements.

Before you start making your own shower-treadmill, you need to find out the technical characteristics of the factory devices and what they depend on. This knowledge will make it possible to plan what indicators can be adjusted at the time of manufacture, how to do it, and what positive or negative consequences they will lead to.

Technical characteristics of the shower-treadmill

Maximum water suction depth

Depends on the elasticity of the case, the harder the material of the case, the greater the vacuum it can create during an increase in the internal volume. But it is impossible to significantly increase the depth of absorption. Why? The fact is that when you press the pump housing, you will have to overcome not only the pressure to supply water to a certain height, but also the resistance of the housing.

Consider the features of the pump. For example, a person weighs 70 kg. If the housing creates a negative pressure of adequate 15 kN for water suction, then to create water pressure it will be possible to apply a force of no more than 55 kN (70 kN - 15 kN). This means that the greater the suction depth, the lower the lift height with the same pressing force on the pump. For example, we took the weight of an adult.

Summer shower is very easy and convenient to use

And if a child will use the shower-treadmill? In connection with such an inverse relationship between suction and pressure parameters, the designers found an acceptable middle option. The factory device can raise water by no more than 50 cm, and the supply pressure depends on the applied efforts. Such parameters allow people with low weight to use the shower-treadmill, the washing process does not require much physical effort.

Maximum water supply height

The greater the compression force of the pump housing, the higher the water pressure is created. Indicators are limited only by the weight of a person. And of course, the physical strength of the body material.

It should be borne in mind that the pressure depends on the applied efforts.

Performance

Depends on two parameters: the internal volume of the pump and the frequency of pressure. The first parameter is set by the manufacturer, the average values ​​are selected. If the pump has a very large volume, then in order to press the camera, a person does not need to “stagnate” in place, but raise his legs high. This is inconvenient, the designers did not go this way to increase the productivity of the water supply.

On the photo is a factory shower-toptun

The average parameters of the pump are selected in such a way that the volume of water squeezed out from one pump is continuous until the second pump is put into operation. But this does not mean that the frequency of pressure can be increased indefinitely. The fact is that the process of filling the pump takes time, it is possible to press on the pump housing only after its entire volume is filled with water. Performance depends on dimensions.

Factory shower-toptun for giving

Factory models are made of durable rubber, inlet and outlet valves are mounted on special rigid elements. It is almost impossible to find rubber suitable for physical characteristics in the store. In addition to strength, after all, it must be hermetically fixed on the sidewalls, the length and diameter must be coordinated, and stability and durability must be ensured. In connection with such problems, we offer other options for self-manufacturing a shower-treadmill.

With this knowledge, you can start making your own soul-treadmill. We will consider two options for devices, both have their advantages and disadvantages.

Pneumatic shower-toptun

According to the principle of operation, it bears little resemblance to the factory version, and in terms of comfort it is not only in no way inferior to it, but also surpasses it in many respects. The device we propose does not pump water, but air, although the principle of operation of the pumps is the same.

Shower device diagram

What are the main differences?

1. If the usual shower-toptun takes water from the tank and delivers it to the watering can, then excess pressure is created in the sealed container with water using a foot pump, which pushes the water into the shower head.
2. The pump does not pump water, but air.
3. Water pressure can fluctuate widely.

Step by step manufacturing instructions

We only give circuit diagram production, everyone can make minor changes to it, taking into account the available materials. Water from the shower will flow under pressure, air will be pumped car pump or frog pumps for inflating rubber boats.

Step 1. Choose a suitable water container. It can be a twenty-liter plastic container for bottled water, a metal or plastic barrel, a milk can, a canister, etc.

practical advice. If you are planning to make the shower mobile, then you do not need to look for a large capacity. Practice shows that twenty liters is enough to wash one person. In addition, you will not be able to pump hundreds of liters of water with your feet; this requires a lot of time and physical effort.

We recommend using plastic canisters for making showers. They have sealed lids, carrying handles and a volume of up to 50 liters. Another plus of this container is that the large wall thickness allows it to withstand significant pressures without any problems.

plastic cans

Plastic barrels for water

Step 2. Fix the inlet and outlet pipes on the cover. Air will be pumped through one pipe, the other serves to supply water to the shower head.

For example, consider mounting nozzles on the lid of a plastic canister or barrel. The diameter of the nozzles is within 10 mm, select specific values ​​taking into account the diameter of the pump hoses and the available parts.

Important. If you hold the lid with your hands, then be very careful. Remember that the drill can pull out the cover, be especially careful when drilling after a through hole has appeared on the reverse side. The side edges of the cutting tool grab the plastic and begin to rotate it with great effort. It is at this moment that the lid most often breaks and injures the master.

Step 3. Insert a pipe into the hole, there should be a metric thread at both ends. Put on rubber gaskets (it is possible on one side), install metal washers on top and tighten the connection with nuts.

Elements for fixing nozzles

Practical advice. We strongly do not recommend fixing the nozzles only with sealant or glue. During the use of the unit and pumping air, dynamic forces of alternating direction act on the nozzles. Over time, the adhesive or sealant will peel off, leading to a leak in the joint. If the air outlet is small, then the shower can still be used, only the pump will have to be pumped more often and faster. If the gaps are significant, then you will have to deal with repair work.

Fitting with washers

Step 4 Attach a long hose to one branch pipe, it will supply water to the watering can. To the second is fixed a short hose for air supply. To make it easier to put on a plastic hose, heat its end in boiling water and put it on plastic in this state. After cooling, reduce the diameter of the hose, the connection is quite reliable. Moreover, there will be no high pressure in the hose. If in doubt, additionally fix the end with a small clamp of a suitable diameter. To increase the tightness of the connection, several turns of electrical tape can be tightly wound on the nozzle.

You can wind tape or fum

Step 5. If necessary, attach special adapters to the nozzles to connect the pump hose and shower head. Connect them too after heating the end of the hose.

Fitting attached to the lid

How to use such a shower?

Pour water into a container and place in the sun to heat. If there is no time, then you can immediately cold water dilute warm.

Important. Always leave about a third of the volume of the air container. Due to this, it will be possible to create a sufficient pressure margin for a complete outflow of water. Pump up air with a foot pump, there is no need to pump a lot of air. A pressure of one atmosphere raises water to a height of 10 meters. For your information, bicycle tires have a pressure of only 0.5 atm.

The pump does not need to be switched off, it has a built-in non-return valve to prevent pressure drop. Practice shows that a pressure of approximately one atmosphere can guarantee the outflow of 15 liters of water from a twenty-liter container when it is filled with water by two-thirds of the volume. You can take a shower right away or wait for a while until it warms up to a comfortable temperature.

How a pneumatic shower works

What are the advantages of the proposed design? There are quite a few of them and all of them significantly increase the comfort of use. portable shower.

1. There is no need to constantly stomp on the soul. For the elderly and sick people, this is a tiring task.
2. Water turns on / off as needed. There is an opportunity to take a shower.
3. Small children can use the unit. They either turn on the watering can themselves, or wash themselves with the help of their parents.

Such advantages make this shower design quite popular among numerous owners of summer cottages. The shower can be installed not only outside the city, but also taken with you on a picnic, fishing or on a land plot for agricultural work.

Such a shower can be installed permanently

If you install a non-return valve on the inlet pipe, then such a device will be very useful during the processing of plants. chemicals pest and disease control. A check valve can be purchased at any hardware store. The presence of a check valve makes it possible, after pumping air, to disconnect the pump and carry the container in your hand. No need to take expensive models with the ability to automatically control pressure. An ordinary rubber valve in a normally open state is sufficient. In this position, the valve is held by a spring. When the air jet moves in the opposite direction, the air presses the rubber gasket against the socket and closes its outlet from the nozzle.

Check valve device

One of the modifications of the summer shower

Video - Foot shower "Rain"

Video - Shower from a plastic bottle and pump

Shower-stomper from two pumps "frogs"

You can try to make another version of the soul-treadmill. For these purposes, take the so-called "frogs" as pumps. These pumps are used to inflate rubber boats. There are two types of devices in the implementation.

Two such pumps are connected into a single structure using a tee and plastic tubes. You need to connect two inputs and two outputs. The inlet hose is lowered into a container with water, the outlet is connected to the shower head.

We lower the hose into a container of water (the photo shows an example of a factory shower, a similar design can be made from two pumps, hoses and a watering can)

Get on the rug and wash

Water pressure can be adjusted

Can be attached to a pole

Video - Shower-stomp in work

The design is ready for use, but it has significant drawbacks.

We considered two options for the independent manufacture of portable shower units, but there is also a third, in our opinion, the most successful one. According to the reviews of many owners of an industrial-made shower-treadmill, they use such devices no more than two or three times. And then they remember the old, simple, cheap and universal way. They buy an ordinary ladle and water themselves with water from a bucket.

Video - Shower toptun

bath-expert.ru

do-it-yourself video instruction for choosing, features of hiking tourist products with a toilet, price, photo

When going on a trip to nature - to the country house or on a hike, it is advisable to provide a way to maintain personal hygiene, especially if the event is long. Today we will deal with a simple portable device in the form of a tent, which can be both a shower stall and a room for natural needs. Alas, even in the forest it is not always possible to find a secluded place, not to mention open space.

It should be recognized that in field conditions you can get smeared much faster than in ordinary life. Therefore, the moment will inevitably come when you have to wash off the dirt, and in some cases just cool off. A simple design will help in this, which easily turns into a “hidden toilet”. Do-it-yourself shower tent is made or purchased ready-made.

Shower tent for camping conditions

What do we offer

Shower design

Where are you most likely to see these devices?

Of course, in stores selling tourist equipment.

1. One of the most popular is the Seattle Sports camping shower, which is offered in three models that differ in the volume of the water tank.
2. Want to use warm water? No problem. Collect the liquid in a container and leave it for several hours in the open sun. Of course, it is unlikely that it will be possible to splash around enough, but, according to the instructions, the 20l model is capable of continuously supplying water for 8 minutes.

Tourist tent for toilet or shower

Tip: if you have a large company, you can buy a tourist shower for 40 liters.

1. If a trip is organized by car, you can use a special car shower made of hard plastic. A design feature is the use of a heating element, which can be connected to a "cigarette lighter" or to a 220 V network using an adapter.
2. Good option, excluding the constant running around with buckets to the soul from the source to suburban area, the use of a plumbing electric pump.

cabin

So, we figured out how to take a shower, now it remains to talk about where, or rather, what can be done. This is especially true for rather shy people.

Manufacturers thought and offered a folding version of the booth, which looks like a tent. Structurally, they are so simple that they can be made with a certain perseverance with your own hands, after which you can take a shower even in a field or a crowded campsite.

Tent for a shower or toilet with windows

However, there are other ways to use such structures that allow you to hide from prying eyes. We are talking about a latrine, which should also correspond to the cultural experience of our civilization. Certain rules should be observed not only in urban, but also in field conditions, in order to remain constantly a person in any place and in any situation.

Some cannot imagine how they will rectify natural needs simply in the forest among bushes and trees. Although there are many who consider this method quite suitable. They practically do not care that someone might accidentally be nearby.

For the rest, we recommend that you think in advance about a tent for a dry closet or a corresponding bucket toilet. These simple and inexpensive devices will allow you to remain a representative of a civilized society even in the most remote wilderness.

Foldable tent with toilet and camp shower

Design

The main philosophy of such a hiking accessory should be lightness, ease of assembly and comfort of use. Outwardly, it is an ordinary tourist tent, which allows you to take a shower or go to the toilet during the transition.

There are 3 options:

In the photo - a portable dry closet with a tent

Tip: get a model with windows, then it will not be dark in the “room”.

Manufacturers have taken care of the color preferences of buyers. Hidden color options are offered - green, dark beige, khaki or protective, or you can choose a bright palette. (See also the article Camping washbasin: features.)

Making our own shower

A couple of tips on how to bring yourself closer even in field conditions to civilization:

1. You will need a regular plastic bag and a cork from a PET bottle with holes. Cut off the corner of the bag and secure the cork in it with tape. Hang the structure from a tree or attach it to a pole.

Tip: instead of a cork, you can simply make a hole in the bag.

Hanging shower tent

1. You can replace the bag with a durable canvas bag, which is often used by the military for various purposes. The neck of a garden watering can is used as a shower. Then the structure is suspended, and a tent or fence is put around. Here is the finished shower.

Conclusion

Although there are those who say that “hygiene is the enemy of the tourist”, it is better to take care of it in advance. Moreover, today it can be done for little money or using improvised means. A shower or toilet tent will always come in handy if you like to go camping often. The video in this article will provide an opportunity to find Additional information on the above topic.

Sergey Olegovich, Chelyabinsk asks a question: Good afternoon. Please tell me how to make a camp shower with your own hands. I recently bought a plot of land without buildings, now I am equipping it. A shower is necessary, because after work you need to wash normally. It is desirable that it can be easily assembled and taken away with me or hidden in a shed when I build it. Thanks in advance for your advice. The expert replies:

Hello. Making a camping shower with your own hands is not difficult. There are several options for a portable design for washing. The simplest of them consists of a plastic canister with a cork, electrical tape, a piece of hose or corrugated pipe, and a coil of wire.

First you need to make a watering can. Cut off the bottom of the canister with a knife or scissors. A piece of hose must be attached to the neck of a plastic container and fixed using electrical tape. A wire hook is attached to the lower edge of the pipe so that it can be hooked onto the watering can support, otherwise all the water will immediately pour out. You can do without a hose, then during washing you need to unscrew the lid a little and the water will flow gradually.

We attach the resulting watering can to a tree, pole or other support. The same coil of wire, electrical tape, adhesive tape, etc. is suitable as a fastener. If not, then attach it to the fence post, if the height allows. If it is too low, then you will need to dig a support for the shower so that it is higher than you and other people who will wash.

The second version of the camping shower consists of a container for water (a basin, a bucket, a barrel, a tank), a hose with a watering can, which can be bought at any plumbing store, a foot pump, and adhesive tape. We attach a shower head to a tree or a pole along with a water supply to the height you need. At the bottom we connect the hose to the pump. On the other side of it is another pipe, the other end of which is lowered into a container with water.

For the system to work, you need to press the pump with your feet, then the water will rise up and pour out of the watering can. It turns out both a shower and a simulator. Such camping designs for washing are sold in stores, but it is quite possible to assemble them yourself.

A curtain is not always used for a summer shower. If you need it, then it is easy to attach. Next to the main support for the shower head, place 4 wooden or steel pegs and stretch between them ordinary curtain for the bathroom or any other canvas. To keep it, sew fabric ties to it from the inside and tie the curtain to the pegs on them.

There is also a more extreme version of the camp shower. So you can wash not only in summer, but also in cold seasons, even at very low temperatures. For example, 15°C. It requires a plastic container with a cork, a steel vat, large stones, a tent sheet or plastic wrap. The canvas or film is stretched between several trees. For convenience, they can be attached to wooden pegs in advance, so as not to look for a suitable place, but to put the frame anywhere.

First, we just choose a place, we don’t put the canvas. We kindle a fire, heat the boulders in it and heat the water in the vat. Then we mount the frame from the canvas. Above it we attach a plastic watering can with a cut bottom. After the stones warm up, we take them out of the fire and lay them out inside a kind of shower cabin. Cooling down, they warm up the space around them very well. Next, pour warm water into plastic container and carefully unscrew the lid to wash. Sometimes this design is called not a shower, but a camping bath.

Love to be in nature? Can't imagine life without hiking in your native land? Are you building a cottage while you have nowhere to wash? Or maybe you just like extreme sports? You will have to learn how to build a camping shower with your own hands. You can make it from almost any improvised containers. Washing in warm water, in a warm room is not only pleasant: in cold weather, health can depend on such a shower. Even novice conquerors of nature can build a camping shower.

Building a watering can

The simplest shower is arranged like this. A curtain is attached to the tree (if you want to wash alone). A hole is made in the cap of a large plastic bottle, where a piece of hose is inserted. The lid itself is attached to the bottle with electrical tape (if there is a hose). If it is not there, then in order for water to pour, it is enough to unscrew the lid. For a large capacity, any thin hose is suitable, for a "one and a half" - a tube from a dropper. It must be securely fastened in the opening of the cover. To prevent water from flowing spontaneously, you can pinch the hose with a stopper or use a wire hook to attach the end at the top. Next - cut the bottom of the bottle, close the lid, strengthen it on a high branch. For convenience, you can place the bottle in a net or simply attach it to a branch with a wire. The simplest camping shower is ready. A heating pad, etc. can be used instead of a plastic bottle. Such a device is quite suitable for summer time.

But what if you are on a hike, around the mountain and -20 ° C, but you really want to wash? Actually, it is the next building that will be what is called a “real camping shower”. Naturally, you can make it anywhere, but, they say, it was the climbers who came up with this method of hygiene.

We build a portable camping shower

Actually, only the curtain will be portable and we assemble all other parts right at the halt. We will need:

• Devices for kindling a fire.
• Boulders the size of a three-year-old boy's head, but a bucket of ordinary pebbles or other stones can also be used.
• Curtain.
• Plastic bottle with stopper and hose.
• A tent or film stretched over a frame. The frame can be carried with you, or you can build between trees.

In order to build a warm camping shower, we kindle a fire, put stones in it, and heat water over the fire. While everything is warming up, we mount a kind of wigwam from cellophane (if there is no empty tent). You can use branches, etc.

We make a mount above the wigwam: here we will hang a plastic bottle (see the device above) with water. When the stones warm up, carefully lay them around the perimeter of the "wigwam". This is the most dangerous part of the procedure: you can burn yourself. Boulders or pebbles must cool in the "wigwam" so that they can be stood on. In the process of cooling, they warm the air very much. Then we hang a bottle of hot water and ... with a light steam! Usually, stones allow 4-5 tourists to take a camping shower, and only after that the “room” begins to cool down. If you do everything quickly, and take more boulders, then even a group of 15 people will have time to complete the prescribed bath procedures.