Do-it-yourself oil for an aroma lamp. How to quickly and easily assemble an aroma lamp from improvised materials. Insomnia, stress, irritability, anger

Aromatherapy has been around since ancient times. The principles of scent healing have been used in Egypt, Greece, India, China and other Asian countries. Gradually, this trend spread to Europe and America. As is known, essential oils have a relaxing, calming, anti-inflammatory effect. You can choose the right smell for yourself and enjoy, while it is quite possible to make a device for supplying oil (which is called an "aroma lamp") with your own hands.

Device

A simple design from a container with essential oil and - that's what an aroma lamp is. With their own hands, this device was made (as mentioned earlier) back in ancient egypt and Mesopotamia. It was an ordinary lamp, above which a small container (made of ceramics, glass and other natural materials) was installed - oil from various herbs was dripped into it with the addition of water.

It can be noted that at the moment the principle of the device has not changed much, but at the same time, the device is also used as an addition to the interior, as lighting device or flash drive.

Fixture types

Aroma lamp (you can make a simpler version with your own hands) is of the following types:

• Classic device. The most common contraption consists of a bowl of water and oil, which is heated with a burning candle.
• This device differs from the prototype in that a conventional lighting bulb powered by the mains is used as a heating element. Moreover, this device is also used for soft lighting of the room.
• Aroma lamp with ultrasonic device. The principle of operation of this device is significantly different from previous types. Here, the oil is fed into the diffuser, where it evaporates under the influence of ultrasound. This aroma lamp (it will be difficult to make such a device with your own hands) does not produce side odors, such as from burning a candle, it is safe, since water is not used here, which, if handled carelessly, can lead to the mains. In addition, this device is economical, since the oil is not diluted, but immediately enters the diffuser.

How to make an aroma lamp with your own hands?

In order to make such a device yourself, you may need the following materials and tools:

• oblong tin can;
• small candle;
• metal scissors;
• bowl or other suitable utensils;
• glue and decoration stones and other materials).

This is a very simple way to make an accessory such as an aroma lamp with your own hands. The master class is presented below.

When choosing a jar, pay attention to the fact that the top of it should be smooth. Below, in the side surface, you need to make a small hole through which the candle will be installed. The bowl or other utensil should fit the top hole in the jar in such a way that the position of the bowl is stable. The surface of the jar can be decorated with various materials and glue of your choice. After that, you can set the bowl on the jar, fill it with water and add a few drops of oil.

This device has a good calming and healing effect. In addition, some essential oils (for example, coniferous) disinfect the air. This device can be installed anywhere in the house and enjoy pleasant aromas.

Recently, for the treatment of certain diseases, more and more resort to the use of methods traditional medicine, the most popular of which is . Medicinal properties provide direct aromatics. Aroma lamps are used to distribute these substances throughout the room. at home will not only be an excellent tool for prevention and treatment, but also help to relax and calm down. Today we will answer the question of how to make an aroma lamp and how to use it.

How to use an aroma lamp

IN traditional version it is a small ceramic vessel in which there is a bowl for evaporation and a decorative recess where a candle is placed. In modern aroma lamps, a heating element replaces the candle.

The principle of use is very simple:

1. Pour 3-5 tbsp into the evaporation bowl. spoons of water.
2. Add essential oils to it (1 drop per 5 square meters of the room). The maximum amount is 15 drops, the minimum is 3. For example, you can.
3. Light a candle or turn on the heating element.
4. In the process of aromatherapy, the water will begin to evaporate, so it is necessary to add it periodically.

Some usage tips:

• The distance between the source of fire and the bowl of oil should not be less than 10 cm.
• Before the procedure, it is better to ventilate the room, but during the therapy itself, the windows must be closed.
• The time of one session is from 20 minutes to 2 hours.

Safety

Aroma lamps are a potential source of fire. In order to avoid accidents, you should remember the basic rules when conducting aromatherapy.

1. The aroma lamp should stand in an open place (there should also be free space on top).
2. The lamp must be placed on a stand so that the furniture does not heat up.
3. The lamp should stand on a flat surface, in a well-fixed position.
4. Water must always be present in the evaporation bowls.
5. The temperature in the bowl should not exceed 70˚.
6. When using the aroma lamp for the first time, pour only water into the bowl to make sure that all the above conditions are correctly met.

Selection of essential oils

To carry out aromatherapy with the maximum effect for your body, you should choose the right one.

To soothe and relax the body:

• orange blossom oil

Energizing and invigorating:

• Bergamot
• Rosemary

For headaches:

• Chamomile
• A blend of clary sage and sandalwood
• Sage

How to choose essential oils

Rules for choosing quality oils

• The label must contain the name of the plant in Latin (consists of two words, for example, Eucalyptus viminalis). The manufacturer must also be listed there.
• Essential oil in a transparent bottle, most often, is of poor quality, and in a dark and brown one, on the contrary.
• The oil must be homogeneous, without sediment and floating particles.

How to make an aroma lamp at home

After reading articles about the benefits of aromatherapy and their magical effect on a person, people run to the store to buy an aroma lamp. However, it soon turns out that the presented models are either too expensive, or do not fit the interior of your apartment, or simply seem unsafe. But you should always remember that making an aroma lamp with your own hands is not difficult. Below are a few methods for making it.

From cans

Required items:

• Tin can with a smooth top.
• sharp knife
• Candle
• Hemispherical dishes (for example, a bowl or a ladle)
• Various decorations (shells, sequins, etc.).

How to make an aroma lamp with your own hands:

Another option is how to make an aroma lamp from cans at home:

Clay

Required items:

• Special clay for modeling
• Knife or toothpick
• Foil
• Candle
• Water and paint

How to make clay aromatherapy:

1. Lay foil on the desktop and start kneading the clay.
2. Roll out the clay into a cake (about 1 cm in height) and give it the desired shape (the classic version is a circle).
3. Roll up clay sausages and, laying them out in layers, reach the desired height.
4. Level the surface of the product using a knife and water.
5. After alignment on the aroma lamp, you can create relief patterns.
6. Put the product outside, preferably in sunny weather, so that it dries faster.
7. Then put the aroma lamp in the oven (every 15 minutes you need to increase the temperature by 30˚ and eventually reach 200˚).
8. Once your work is dry and absolutely solid, you can paint on it with different ornaments and patterns.

From a glass jar

Required items:

• transparent glass jar
• Wick
• Paraffin oil
• Various fragrant plants (berries, nuts, cones, etc.)

Manufacturing procedure

1. Put all the necessary spices in a jar and fill them with paraffin oil.
2. Using an awl, make a hole in the roof and stretch the wick so that it sinks 2/3 into the oil.
3. Screw the lid on tightly and light the wick.

From an orange

Required items:

• big orange
• Candle-tablet

How to make an aroma lamp at home from an orange:

1. Cut the fruit in half and, using a knife, completely remove all the pulp.
2. In one of the hemispheres, cut out a star in the center (or another figure of your choice).
3. Lubricate with aromatic oil all over inner surface orange.
4. Put a candle in that half of the fruit where there is no cut out figure and cover with the one where it is.

From a light bulb

Required items:

• Incandescent light bulb
• Screwdriver
• 5 ruble coin
• Cold welding
• Medical alcohol
• Wick
• Silicone
• Knife and hammer

Aroma lamp at home from a light bulb - manufacturing procedure:

1. Using a hammer, we knock out the core at the base and then disassemble the light bulb using a screwdriver. As a result, nothing should remain inside it.
2. Glue a coin with silicone to the top of the light bulb, which will become the base.
3. Pour alcohol and essential oils into the flask.
4. We pass a wick into the hole of the base, cover the edges with cold welding.

Electric aroma lamp

Aroma lamps, which are powered by electricity, emit the purest aroma of oils, since there is no smell of paraffin.

Required items:

• Cylindrical pipe without bottom
• Dishes for aromatic oils
• Cartridge and stand for it
• 15 watt bulb
• Plug cable

Electric aroma lamp at home - manufacturing procedure:

1. Assemble the cable, plug and cartridge into a single unit and screw in the light bulb.
2. Strengthen the structure on the stand, put the cylinder on top.
3. Place a suitable dish on top of the cylinder.

By the way: if you need to quickly conduct an aromatherapy session, then use the following method: pour water and essential oil (10 ml per 1 drop) into a ceramic bowl, put it on a hot battery. You can also simply put a piece of cloth that has been soaked in a solution of aromatic oils on the battery.

In fact, if your imagination and ingenuity are well developed, then there can be an infinite number of options for how to make an aroma lamp at home. The main thing to remember is safety, and do not get carried away with long sessions.

Aromatherapy has been popular since time immemorial. It was also used in medicinal purposes and for relaxation. It was believed that with the help of certain smells, you can change the energy in the house, cleanse it of negativity and affect the emotional and physical state of the household. We invite you to watch our master classes and make an aroma lamp yourself.

The main components of an aroma lamp are a container with water, essential oils and a candle. The fire heats the water with oils, and they begin to gradually evaporate. Very often in Eastern countries only essential oils are used, without water. In this case, the smell is concentrated, so we recommend using this method only in large rooms. So, we are trying to make our clay lamp. For this you will need:

• Ready clay for modeling
• piece of foil
• Clay wooden knife

Manufacturing:

Useful and easy to use device. The advantages of the device are that it is absolutely safe, and with its help you can adjust the duration of the aromatherapy session. There are water and waterless electric aroma lamps. Collecting them at home is quite problematic, but you can use more available materials, for example, tin cans or ordinary light bulbs. Just from the latter, very creative things are obtained. For clarity, take a look at these photos:

The next option is suitable for those who love glassware. You can get by with improvised means, all materials can be found in every home. You will need:

• transparent container
• piece of wire
• Dry flowers
• aromatic oil
• Olive oil
• coil of rope
• Pliers
• Scissors

Manufacturing:

What are the best scents to use for aromatherapy?

Essential oil molecules enter our nose, and then move further, through the sinuses and straight into the brain. Thus, they affect certain parts of it, giving us various emotions. So, for example, rosemary gives energy, tones and helps to focus. Coriander, with its spicy aroma, increases appetite and helps fight sleep. Lavender relieves stress, relaxes and normalizes sleep. Cedar relieves stress, adds confidence, stimulates efficiency. Tea tree and lemon are good antiseptics, so it is recommended to use them during the peak of respiratory diseases to disinfect rooms.

Do-it-yourself aroma lamp. Video:

Recently, for the treatment of certain diseases, they are increasingly resorting to the use of traditional medicine methods, the most popular of which is. Medicinal properties are directly aromatic substances. Aroma lamps are used to distribute these substances throughout the room. at home will not only be an excellent tool for prevention and treatment, but also help to relax and calm down. Today we will answer the question of how to make an aroma lamp and how to use it.

How to use an aroma lamp

In the traditional version, it is a small ceramic vessel in which there is a bowl for evaporation and a decorative recess where a candle is placed. In modern aroma lamps, a heating element replaces the candle.

The principle of use is very simple:

1. Pour 3-5 tbsp into the evaporation bowl. spoons of water.
2. Add essential oils to it (1 drop per 5 square meters of the room). The maximum amount is 15 drops, the minimum is 3. For example, you can.
3. Light a candle or turn on the heating element.
4. In the process of aromatherapy, the water will begin to evaporate, so it is necessary to add it periodically.

Some usage tips:

• The distance between the source of fire and the bowl of oil should not be less than 10 cm.
• Before the procedure, it is better to ventilate the room, but during the therapy itself, the windows must be closed.
• The time of one session is from 20 minutes to 2 hours.

Safety

Aroma lamps are a potential source of fire. In order to avoid accidents, you should remember the basic rules when conducting aromatherapy.

1. The aroma lamp should stand in an open place (there should also be free space on top).
2. The lamp must be placed on a stand so that the furniture does not heat up.
3. The lamp should stand on a flat surface, in a well-fixed position.
4. Water must always be present in the evaporation bowls.
5. The temperature in the bowl should not exceed 70˚.
6. When using the aroma lamp for the first time, pour only water into the bowl to make sure that all the above conditions are correctly met.

Selection of essential oils

To carry out aromatherapy with maximum effect for your body, you should choose the right one.

To soothe and relax the body:

• orange blossom oil

Energizing and invigorating:

• Bergamot
• Rosemary

For headaches:

• Chamomile
• A blend of clary sage and sandalwood
• Sage

How to choose essential oils

Rules for choosing quality oils

• The label must contain the name of the plant in Latin (consists of two words, for example, Eucalyptus viminalis). The manufacturer must also be listed there.
• Essential oil in a transparent bottle, most often, is of poor quality, and in a dark and brown one, on the contrary.
• The oil must be homogeneous, without sediment and floating particles.

How to make an aroma lamp at home

After reading articles about the benefits of aromatherapy and their magical effect on a person, people run to the store to buy an aroma lamp. However, it soon turns out that the presented models are either too expensive, or do not fit the interior of your apartment, or simply seem unsafe. But you should always remember that making an aroma lamp with your own hands is not difficult. Below are a few methods for making it.

From cans

Required items:

• Tin can with a smooth top.
• sharp knife
• Candle
• Hemispherical dishes (for example, a bowl or a ladle)
• Various decorations (shells, sequins, etc.).

How to make an aroma lamp with your own hands:

Another option is how to make an aroma lamp from cans at home:

Clay

Required items:

• Special clay for modeling
• Knife or toothpick
• Foil
• Candle
• Water and paint

How to make clay aromatherapy:

1. Lay foil on the desktop and start kneading the clay.
2. Roll out the clay into a cake (about 1 cm in height) and give it the desired shape (the classic version is a circle).
3. Roll up clay sausages and, laying them out in layers, reach the desired height.
4. Level the surface of the product using a knife and water.
5. After alignment on the aroma lamp, you can create relief patterns.
6. Put the product outside, preferably in sunny weather, so that it dries faster.
7. Then put the aroma lamp in the oven (every 15 minutes you need to increase the temperature by 30˚ and eventually reach 200˚).
8. Once your work is dry and absolutely solid, you can paint on it with different ornaments and patterns.

From a glass jar

Required items:

• Transparent glass jar
• Wick
• Paraffin oil
• Various fragrant plants (berries, nuts, cones, etc.)

Manufacturing procedure

1. Put all the necessary spices in a jar and fill them with paraffin oil.
2. Using an awl, make a hole in the roof and stretch the wick so that it sinks 2/3 into the oil.
3. Screw the lid on tightly and light the wick.

From an orange

Required items:

• big orange
• Candle-tablet

How to make an aroma lamp at home from an orange:

1. Cut the fruit in half and, using a knife, completely remove all the pulp.
2. In one of the hemispheres, cut out a star in the center (or another figure of your choice).
3. Lubricate the entire inner surface of the orange with aromatic oil.
4. Put a candle in that half of the fruit where there is no cut out figure and cover with the one where it is.

From a light bulb

Required items:

• Incandescent light bulb
• Screwdriver
• 5 ruble coin
• Cold welding
• Medical alcohol
• Wick
• Silicone
• Knife and hammer

Aroma lamp at home from a light bulb - manufacturing procedure:

1. Using a hammer, we knock out the core at the base and then disassemble the light bulb using a screwdriver. As a result, nothing should remain inside it.
2. Glue a coin with silicone to the top of the light bulb, which will become the base.
3. Pour alcohol and essential oils into the flask.
4. We pass a wick into the hole of the base, cover the edges with cold welding.

Electric aroma lamp

Aroma lamps, which are powered by electricity, emit the purest aroma of oils, since there is no smell of paraffin.

Required items:

• Cylindrical pipe without bottom
• Dishes for aromatic oils
• Cartridge and stand for it
• 15 watt bulb
• Plug cable

Electric aroma lamp at home - manufacturing procedure:

1. Assemble the cable, plug and cartridge into a single unit and screw in the light bulb.
2. Strengthen the structure on the stand, put the cylinder on top.
3. Place a suitable dish on top of the cylinder.

By the way: if you need to quickly conduct an aromatherapy session, then use the following method: pour water and essential oil (10 ml per 1 drop) into a ceramic bowl, put it on a hot battery. You can also simply put a piece of cloth that has been soaked in a solution of aromatic oils on the battery.

In fact, if your imagination and ingenuity are well developed, then there can be an infinite number of options for how to make an aroma lamp at home. The main thing to remember is safety, and do not get carried away with long sessions.

Smells can make our home inimitable and unique. Those who seek to create a cozy, stylish environment cannot do without exclusive accessories. Coming after a hard day at work, you want a light atmosphere at home.

And it will help to create an aroma lamp, which is easy to make at home. Home fragrance is one of the main components of any interior, and a fragrance vase will decorate any style and emphasize the individuality of the owner of the home.

Purpose of smells

Smells are important in our life. They are reminiscent of the past. The smell of the house plays a huge role in the psycho-emotional support of the whole family. You would not resist if your spouse, leaving on a business trip, takes the smell of the house with him, and will remember you. Or a grown child in 10 years will pass through the streets and suddenly hear a familiar smell, remember his native penates.

The aroma lamp performs the following functions:

• disinfection, air purification.
• relaxation and mood creation.
• air freshener, humidifier.
• prevention and treatment of respiratory diseases, dermatological, catarrhal diseases.
• boosting immunity.
• relieving stress conditions.

An aroma lamp bought in a store that offers various flavors and air fresheners has an insincere smell, has no personality and can only mask an unpleasant background. For other options for home or office perfumes, where an exclusive design and a perfectly matched perfume composition are felt, you will have to pay a rather large amount of money.

An aroma lamp made from improvised means at home is not only pleasant and useful thing for the home, but saves money.

Aroma lamps for different rooms

Do-it-yourself aroma lamp involves the use of essential oils. It can be the smells of mint, lemon balm, cedar, tea tree, lavender, juniper, jasmine and many others. The main thing is that they like it, do not cause irritation and allergic reactions. Feel free to combine smells and experiment with the composition, adding exotic aromas or enhancing them with citrus.

Option 1 - Gelatin aroma lamp for the living room

To cook at home you will need:

• A glass of boiling water;
• 2 tablespoons of gelatin;
• Container for jelly;
• Favorite smell;
• Decor.

1. We are preparing the base. Fill a glass with boiling water, pour in the gelatin powder, stir the resulting mixture until completely dissolved.
2. Season with cinnamon (food powder). It contributes to a good mood, natural, has a pleasant smell.
3. Add dye. Any food coloring is taken in an amount to cover the need for the desired color intensity. It is easy to make dye, for example, from ground coffee, ground tea, beets or berries.
4. Glycerin, bought at a pharmacy, in the amount of 1.5 tablespoons per ordinary glass is added to the finished mixture. This ingredient is needed in order to minimize the evaporation of water from gelatin.
5. Finishing touch. Add 2-3 drops of your favorite scent. This amount of essential oil will be enough for a room of 15-18 square meters. meters fragrant. At first, the smell will be more intense than usual. Then, at home, the smell will become more subtle, will work for 2 weeks.
6. Allow the composition to harden in a cool place. This will take 2 hours.
7. Decorate the smelling container with decorative wire or ribbons. The aroma lamp will look like a designer piece if you place natural, artificial flowers or dried buds in a gelatin composition. Thus, when solidified, it will create a beautiful fragrant flower composition that will not only fill the air in the living room with a pleasant smell, but also delight the eye.

Tip: If the burner dries out and the jelly forms a crust on the surface, freshen it up with a couple of drops of essential oil and a drop of glycerin to keep the base fresh. Sugar will not allow moisture to evaporate quickly, just like it keeps the freshness of marmalade on its surface.

Option 2 - Aroma lamp on alcohol for the kitchen

For manufacturing you will need:

• Half a liter of alcohol or vodka;
• Orange - 1 pc.;
• Lemon - 1 pc.;
• Glass jar - 0.5 l;
• floating candle;
• Essential scent optional.

1. We cut the lemon skin around the circumference, and remove the orange peel in halves so that we get 2 bowls.
2. We put orange and lemon peel cut into pieces for a fragrant infusion in a jar. This can be done casually or beautifully chopped citrus peel.
3. The remaining halves of the orange and lemon must be cut into thin strips for decoration.
4. Fill the halves of the lemon and orange skins with a glass of alcohol (vodka). We leave for 1-2 days so that the alcohol smell evaporates, and the citrus fruits are infused.
5. After a day or two, we pour the lemon-orange infusion into a beautiful container with the calculation of adding water and decorate with strips of skins left from the fruit.
6. Add 2 drops of essential oil, place the candle on the surface and leave it in the kitchen for aromatization. A citrus aroma lamp without a candle, placed closer to the ceiling, on a cabinet or shelf, smells more efficiently, since the heat in the kitchen accumulates upstairs.

Advice: spray citrus tincture at home by placing inside a spray bottle.

The only drawback is that the liquid aroma lamp will not last long. The aroma will be useful until the water and alcohol have completely evaporated.

Option 3 - Aroma lamp for the bathroom

For assembly you will need:

• Wide mouth aroma vase;
• Ordinary baby oil - 250 ml bottle;
• Wooden sticks - 3-6 pcs.;
• Alcohol or vodka - 2 tablespoons;
• Essential smell to taste - 4-5 drops.

1. Fill a vase with baby oil.
2. Add alcohol to evenly lift the aroma over the sticks and stir.
3. Season with your favorite scent.
4. We place the sticks in the liquid and leave for 3 hours for the aroma lamp to work.
5. After 3 hours, turn the sticks over to enhance the smell.
6. An aroma lamp made from natural materials is used for 3 weeks or more until the oil dries.

Advice: a pronounced smell is obtained using a larger number of sticks, periodically turning them over.

About the most important

Do-it-yourself aroma lamp will delight not only you. This is a wonderful gift for birthdays and holidays when you go to visit or for housewarming. It will help to make the atmosphere in the house cozy, cheer up and strengthen the body's resistance to disease.

Video: Do-it-yourself aroma lamp

Reasons why you should make an aroma lamp with your own hands:

• It will add coziness, warmth and happiness to your home.
• It will allow you to enjoy the process of creating a lamp that will turn out 100%.
• Pleasant aroma that spreads throughout the house.

Are you ready for the magic?

5 steps to make an aroma lamp from a jar

Materials for making a lamp from a glass jar:

• Wick, paraffin oil.
• Vegetable oil: 1 tablespoon. Olive, sunflower and other oils will increase the duration of the candle up to two hours.
• Glass jar 0.5 l, water.
• Awl.
• Favorite scented oil: lavender, ylang-ylang, patchouli, cinnamon, etc.

Aroma lamp manufacturing algorithm:

• Put the petals, spices, cones in a glass jar at the bottom and fill it with water by 2/3.
• Pour some paraffin and vegetable oil top, about 0.5 cm.
• Add 3-5 drops of aromatic oil.
• Close the jar with a lid, make a hole in it and stretch the wick so that it sinks 2/3 into the oil.
• Screw the lid on tightly and light the wick. Enjoy the aroma and comfort.

6 steps for a flour lamp

Secret ingredients for flour aroma lamp:

• Wheat flour 1/2 cup 300 ml.
• Water to knead the dough.
• Vegetable oil 1/4 cup 300ml.
• Cotton thread.
• Glue.
• Paint for decorating products.
• Paint brush.

Action algorithm:

• IN wheat flour add water gradually.
• The dough should be slightly firm and not too soft.

• Divide the dough into 3 parts. Give each part the shape of a round boat with an elongated bow, as in the picture.

• Lubricate the baking dish. Preheat oven to 200 degrees Celsius. Place the future lamp in the form. Bake 15 minutes. Let cool. Decorate the lamps in your favorite colors. Let dry.
• Dip cotton thread in oil. Fill an oil lamp with oil, such as coconut oil, olive oil, or castor oil. Add a few drops of aromatic oil. Leave the wick on the surface of the lamp, putting it in a special hole.

• Light the wick with a match. To reuse the lamp, use tablet candles.

The benefits of essential oils are undeniable both for the physical health of a person and for his psycho-emotional state. But in order to enjoy your favorite aroma for as long as possible, you will need not only a vial of ether, but also an obligatory attribute of this magical therapy - an aroma lamp. Don't have this accessory at home? No problem! Do useful device on your own from improvised materials is not difficult - enough desire, ingenuity and some of the unnecessary trash.

The aroma lamp is a simple design, which consists of a container with essential oil and a heating element. This device, in addition to aromatic, can serve as a gentle pleasant lighting, as well as interior decoration. Modern products are made from clay, glass, ceramics, metal and other natural materials.

When the oil is heated, ethers begin to evaporate, the aromas of which spread throughout the room, immersing those present in a special state, depending on the functionality of the chosen smell.

Modern aroma lamps are of several types:

• the classical device consists of a bowl of water and oil, which is heated by a burning candle;
• an electric lamp involves the use of an ordinary light bulb as a heating element;
• ultrasonic device involves the evaporation of aromas of oil, which is fed into the diffuser.

How to make an aroma lamp with your own hands at home

A simple aroma lamp can be made independently from improvised materials. In terms of its functionality, it will not be inferior to a factory accessory, and you can work hard on an attractive appearance, if you wish, by showing your imagination.

Important: the material for the aroma lamp must be fireproof to avoid sudden ignition.

Regardless of the material from which the lamp will be made, it is important to follow some recommendations:

• the oil container should be 30-40 ml (2 tablespoons);
• the bowl should be easy to wash;
• the distance from the fire to the oil reservoir is about 8–10 cm (so that the water does not boil, but is hot).

From a tin can

The cheapest, fastest and affordable way enjoy the aromas of your favorite esters - make an aroma lamp from a tin can, which can be found in every home. For this purpose, an oblong tall can, for example, from olives or beer, is suitable..

In addition to the main component, for work you will need:

• marker;
• construction knife;
• awl;
• small candle;
• oil container (bowl or salt shaker);
• glue and decorations (shells, sea stones, etc.).

The following procedure must be followed:

1. First you need to make a hole through which the candle will be placed inside the lamp. To do this, on the side of the jar, you need to draw a cut line with a marker (for example, in the form of an arch), taking into account the size of the candle. The bottom of the arch should be at the level of the bottom of the can.
2. By using construction knife carefully cut out the opening for the candle.
3. In the upper part of the can with an awl, make holes for the exit of combustion products (it can be in the form of a pattern). Pre-drawing the pattern with a marker will make the task easier. Small holes in the form of a pattern along the entire side wall of the can will become creative decoration products.
4. Using the prepared decorations and glue, decorate the lamp as you like.
5. On top of the jar, place a container for oil that is suitable in diameter. Fill it halfway with water and drip a few drops of the prepared essential oil.
6. Place a lit candle at the bottom of the jar.

Once, in moments of creative inspiration, the idea came to me to make an aroma lamp with my own hands. I do not have enough patience and opportunity to spend a lot of time and effort on crafts, so I chose the easiest way, which is described above. I even managed to make it even easier. By simply cutting off the bottom, I got a through jar, which is enough to put on top of a burning candle. In this case, the candle should be smaller in diameter than the jar. I used a steel cocotte maker as a bowl for butter. It only remained to make holes in the side wall of the jar to let smoke out of the fire. Here I gave free rein to my imagination so that my aroma lamp also looked attractive in dark room. The whole job took me less than half an hour. And I get pleasure from the emitted smell every day.

Video: a master class for making a lamp from a tin can

Clay

To make a product out of clay, although not very complicated, you will have to spend a lot of time, effort and diligence. This process is quite laborious, but it will be rewarded with an exclusive, beautiful and useful piece of furniture. Here you can let your imagination run wild and reproduce exactly the shape, color and design style that you like the most.

For work you will need:

• clay for modeling;
• foil;
• special knife for clay;
• paints;
• water.

The principle of operation is reminiscent of modeling from plasticine, which everyone went through in kindergarten and school, but still working with clay has its own characteristics. The instruction for sculpting a clay aroma lamp of a standard shape looks like this:

1. Unroll the foil and work on it.
2. Sculpt a bowl about 10 cm high with a hole in the side to put the candle inside. You can sculpt from a solid piece, or you can lay out the flagella one on one in rings, which at the end are leveled to smoothness with the help of water.
3. Separately, from a small piece, create a plate - a container for oil.
4. With a special knife (if it is not available, you can use a toothpick), apply a relief pattern or pattern. You can impose volumetric figures.
5. Then dry the product. To do this, you first need to put the figure outside, and after drying, place it in the oven, increasing the temperature by 30 degrees every 15 minutes. After turning off, leave the lamp in the oven until completely dry.
6. Now you can paint the product in the desired color.

By the same principle, you can sculpt a product from salt dough: after drying, it turns to stone, creating the effect of a clay figure. To prepare such a mixture, you need to take a glass of fine salt and flour, add 5 tbsp. spoons sunflower oil or hand cream, mix well. After that, start kneading the mass, gradually adding water until uniformity and elasticity are achieved (about 1–1.5 cups of water should go). To get a colored dough, you can add food coloring or natural juice to it. You need to dry the craft from salt dough in the same way as clay in the air, and then in the oven.

Photo gallery: Modeling clay products

Clay for modeling can be purchased at a children's art store The bowl should have an opening on the side for a candle The bowl can be laid out with flagella one on one With some effort, you can get an exquisite piece of furniture

Express way of an aromatherapy session with an orange

If you are not a creative person or you simply lack inspiration, and you want a fragrant pause right now, then there is a simple way to help you relax. An ordinary orange from the supermarket will come in handy for an aromatherapy session.

To create a simple version of a fragrant lamp, you will have to work very little:

1. Cut the orange in half exactly.
2. Separate the skin from the pulp with a spoon.
3. In one of the halves, cut a hole (or several small ones) of any shape.
4. Lubricate the inside of the peel with the selected ether.
5. Put a lit candle in the whole half and cover with a holey part.

To add zest, you can decorate the peel with clove buds, which will not only improve appearance, but also give a special light touch to the aroma.

Safety regulations

Using an aroma lamp, we are dealing with fire, so you need to remember the safety rules in this process:

• do not leave a burning lamp unattended;
• to protect furniture, use an additional fireproof stand;
• choose a place for the device away from curtains and other quickly flammable objects;
• do not spray deodorants, hair sprays, air fresheners and other flammable products nearby;
• Place the lamp out of the reach of children.

The process of making an aroma lamp at home is simple. And if you have a good imagination, then you can find many options for creating a product. The main thing is to follow the safety rules when handling fire, and also not to get involved in the frequent inhalation of ethers.

What is an aroma lamp? This is a "miraculous" device that aromatizes the room due to the evaporation of essential oils. In the store, these devices cost fabulous money, but the benefits of them are amazing, especially during epidemics of viral diseases. Let's try to make an aroma lamp with our own hands, because the effect will be the same, and its price will be ten times cheaper.

What is an aroma lamp for? Modern psychologists say that the creation of an “aromatic environment” in a room greatly affects the emotions of the people who are in it. With the help of aromas, one can even control the human mood in this way, for example, create romantic evenings, tone up, increase libido, etc. The aroma lamp forms a relaxing aura, heals by killing microorganisms, in particular viruses, activates the internal forces of the body, which is very important, for example, in or.

What are aroma lamps?

The simplest aroma lamp is a container with water and essential oils dissolved in it, under which a candle burns. The principle of its operation is simple: a small candle evenly, but not strongly, heats the bottom of the container at the top, and the essential oils gradually evaporate from the surface of the water, saturating the room with a healing aroma. In the East, water is not used, and only aromatic oils are poured. However, the smell at the same time can be very strong, and this, in turn, can even harm.

For a good aroma, about 10 ml of water and 5 drops of essential oil are needed, but you can choose “your” concentration yourself.

Do-it-yourself aroma lamp: is it possible? How to make it?

Prices for aromatic lamps in stores are very "biting", although in fact the basis of each is only material and design. But the result does not depend on this, right? Let's try to make an aroma lamp with our own hands. Using improvised means, you can create a truly effective weapon against viruses and poor health.

Do-it-yourself "candle" aroma lamp

You will need a can of lemonade or beer and a small candle, even in the manner of those sold in romantic rendezvous sets. Cut off the top of the jar and cut as many holes in the sides as possible (three large ones are possible so that a candle can be inserted through one of them).

Place a small deep glass or metal saucer on top of the cut of the jar with a bottom diameter slightly smaller than the diameter of the jar, so that its edges extend beyond the edges of the jar. Pour water into a saucer and drip oils. Put the candle inside and light it. Do-it-yourself aroma lamp turned out to be not very beautiful, but its effectiveness is maximum!

Do-it-yourself electric aroma lamp

You will need an empty hollow cylinder without a top and bottom, a light bulb with a base and a glass plate / bowl. Place a light bulb with a base (which is plugged into a socket) inside the cylinder, fasten it, and place a glass container on top into which you pour water and oil.

The bottom of the container can be taken slightly less than the diameter of the cylinder. Take a light bulb no more than 15W. Turn on - the light bulb heats the bottom of the plate, the essential oil evaporates.

Aroma lamp "battery"

The easiest option: take a porcelain or ceramic cup, fill a little warm water(50 ml), drip 5-7 drops of your favorite essential oil, and place the cup on a hot battery. If you need a "quick" aromatherapy session, this is the best thing you can do.

And, of course, aromatherapy can be carried out using an ordinary piece of cloth soaked in a solution with essential oil. Put a cloth on a hot battery and enjoy the aromas!

What else are aroma lamps?

On sale you will find all similar types of aroma lamps described above. There are also diffuser aroma lamps, the action of which is based on the spraying of the essential oil itself without the participation of water in the process. At the same time, the consumption of ethers is minimal, since it does not even touch the walls of the vessel with the diffuser. The prices for such devices are fabulous, but now you can enjoy the aromas by making an aroma lamp with your own hands.

Mixtures for aroma lamps

You can drip not only pure oil, but also mixtures of esters into a hand-made aroma lamp, and depending on the desired result, they can be as follows:

• From unpleasant odors essential oils of rosemary, mint and lemon in equal proportions will help in the kitchen. If desired, the lemon can be doubled. In total, 5-6 drops of the mixture per 10 ml of water are recommended.
• To increase self-confidence: incense 2k, grapefruit 2k, ylang 2k, orange 2k.
• For toning nervous system: 2k mint, 2k cinnamon, 2k juniper, 3k neroli.
• For calming and relieving anxiety: palmarosa 4k, valerian 5k, ylang 3k or sandalwood 4k, frankincense 2k, rose 3k.
• To disinfect the premises during an epidemic: 4k tea tree, 2k lemon, 2k chamomile.

Work on the creation of an aroma lamp is creative. Here, as in any other business, the easiest way is to repeat what others have already done. There are proven ways to flavor the air in a room, and they work like iron. But not all technical discoveries have been made yet, and not all design features are known. Therefore, prepare ideas and materials - we will create.

Aroma lamp - what is it

The aroma lamp is a device for conducting hot inhalations. In the very simple execution it is a one-piece body, where at the bottom there is a platform for placing a heat source: candles or spirit lamps, and on top there is a bowl where hot water is poured and oil is dripped. As the fire burns, healing compounds evaporate from the surface. The device is designed so that the water does not boil during the operation of the lamp - if too high temperature the natural composition of the essential oil changes, which is undesirable. You can repeat the analogues of finished house models from clay, dough, metal and glass jars.

Why do you need such a device:

• to sanitize the room. Essential oils almost all have bactericidal and antiviral properties;
• as a natural air freshener and fragrance. Essential oils have a very unobtrusive aroma - so sometimes people complain that their aroma lamp does not work. In fact, everything is in order;
• to prevent diseases and improve immunity;
• for relaxation and mood improvement.

When essential oil components evaporate from the surface of the aroma lamp, they irritate the sensitive fiber of the olfactory nerve. The signal carried by essential oils enters the brain: namely, its most ancient system - the limbic, which is responsible for our memories, desires and feelings, for the production of certain hormones and neurotransmitters. It is important to choose for aromatherapy not synthetic, not falsified oils, which are mainly sold on the domestic market.

For information: the cost of 20% essential oils starts from 500 rubles. The aromatic extract is diluted in vegetable oil, which is much cheaper, the percentage of essential oil content is indicated on the package. The production of 100% natural professional oil is quite expensive - up to 1 ton of raw materials is processed to obtain 10 ml of ether. So quality product will cost not 90 rubles and not 200, but from 1000 to 5000 rubles.

Broadcast nerve impulses- commands to the body from the central nervous system - the process is electrochemical in nature. It proceeds normally and without failures when the brain assimilates organic compounds from natural essential oils. In response to the received signal, the body independently begins to produce the necessary hormones. The reaction to artificial information obtained with pairs of cheap pharmacy ethers can be unpredictable.

The aroma lamp should work no longer than 20-30 minutes, during which time all useful compounds will have time to evaporate from the surface of the water

catalytic lamps

Catalytic lamps or Berger lamps work according to a different principle: a composition is prepared from alcohol and essential oil diluted in it. The liquid is poured into a glass bottle - it is filled by about two-thirds. The bottle is similar to the one in which eau de parfum is released. Only instead of a spray gun, there is a carved lampshade and a cap on top that closes the end of the wick placed inside. The cap and lampshade are removed before lighting the wick. The burner is catalytic: made of ceramic and platinum, it is set on fire for only two minutes, then the flame is extinguished. Top cover the bottle with a lampshade. For aromatization of a room with an area of ​​18–20 m 2, 20 minutes are enough. The combustion process continues all this time, but passes without fire and smoke, so there will be no burning impurities in the air. To extinguish the lamp, you need to remove the lampshade and replace the cap: it is important to check that it is firmly pressed against the body. From above, you can put the lampshade again and remove the lamp away from heat sources.

The combustion process in an aroma lamp with a catalytic burner leaves no burning smell in the air

Electric aroma lamps

In electric aroma lamps, the oil reservoir is heated by a thermal block, which is an incandescent lamp, so, in fact, the device is a small lamp, and the ability to heat oil on it is an additional function. The lamp base is attached directly to the power supply, which is equipped with a Euro plug and an on / off button. A glass or ceramic case is put on top with holes for air circulation and a recess on top where water and oil are poured. Batteries can also be used as a power source in such a device.

USB lamps

A convenient option, especially for work, is to connect a heated USB platform to a laptop and use it for aromatherapy. True, the models produced so far do not differ in a variety of designs: a plastic case and a minimum of decor. Therefore, it also makes sense to copy the principle of the device to another case and adapt a technically convenient model for the home.

A USB aroma lamp can be assembled at home based on any convenient body of a conventional aroma lamp.

Ultrasonic diffusers

A modern development for room aromatization is an ultrasonic diffuser, which additionally ionizes and humidifies the air in the room. The device works from a network with a voltage of 120V, therefore, before operation, you must either change the power supply and adapt the device to a 220V network, or use an adapter. The upper part is removable, under the hood there is a water tank where a glass is poured cold water and 5-6 drops of essential oil. Then the device is connected to the network and left for 6-8 hours. The vapor is cold, the liquid evaporates very slowly, so that the aroma lasts almost all day. As a rule, the diffuser is also equipped with a changing backlight function.

The aroma diffuser usually has a lot of additional effects - lighting, modes, a large water tank, and among the disadvantages is the formation of condensate on the surface where the device is standing

Safety

Prepare for an aromatherapy session. Rinse the bowl where the oil is poured, check that there are no traces of the oil mixture on the outside - it is highly flammable. Heat water in the kettle - only hot water can be poured into the tank, the optimum temperature is 50–60 o. Candles are best taken without smell, in metal tablets. The coasters themselves, by the way, can then be reused - they are comfortable, and on the bottom they have a ready-made wick clip.

Before the procedure, it is recommended to ventilate the room for 20-30 minutes. When you light the aroma lamp, close the door, windows and vents. Natural essential oil gives a very unobtrusive aroma - it will not make you feel sick or dizzy and you will not want to go out into the fresh air. If such a desire nevertheless appeared in those 10–15 minutes that the aroma lamp was working, you have low-quality oil. Find another use for it: for household purposes, for example, for washing clothes or mopping the floor. Remember the dosage: 5-6 drops of oil or oil mixture are enough for a room of 18–20 m 2.

Do not place the aroma lamp on the surface of plastic, foam, it is also undesirable to place the device on a table covered with a tablecloth or oilcloth. During operation, the lamp should not be near heating devices and open flames.

Do not leave the device unattended: the principle “you never know what can happen” has not been canceled, especially if you are dealing with a combustible mixture. Remember that small children and pets create an additional risk of fire - it is recommended to remove them from the room during the procedure. Only 20, at most 30 minutes is enough to aromatize the room, because during this time the oil evaporates. Only diffusers can work for several hours, but there is cold vapor and the evaporation process is much slower.

At the end of the procedure, extinguish the wick / unplug the device and wash the tank in soapy water, and then rinse with clean water and vinegar. So next time you can use a different flavor, and it will not mix with the old one. Then wash the outside of the case and wipe dry.

A lamp that is cracked or otherwise damaged should be discarded.

Caution during the operation of aroma lamps should be observed due to fire safety

How to make an aroma lamp at home

• the oil tank should be easy to clean;
• bowl volume - not less than 30 ml (2 tablespoons of water);
• the distance from the fire to the bowl is 8–10 cm so that the water is hot, but does not boil away;
• in devices that run on electricity and USB, the bowl can be closely attached to the power source.

metal

Materials, in general, are taken the same for several simple models:

• a tin can, preferably narrow and elongated, as from under olives or beans;
• marker;
• construction knife;
• candle / spirit lamp;
• container for oil (saltcellar, socket).

Method one.

It is assumed that the lid is already missing in your jar - it is not needed for the aroma lamp.

1. Decide what your lamp will work on. The width of the opening for a candle and a spirit lamp is different. Estimate the width of the opening and mark with a marker a contour in the form of a hemisphere.
2. The bottom should be flush with the bottom of the jar, the top - so that the fingers pass freely.
3. Draw the same hemisphere on the opposite side of the jar.
4. Cut out both phalanges.
5. Place a socket upstairs, fill it with two-thirds of hot water, drip oil.
6. Light a candle / spirit lamp and place it on the bottom of the jar.

Method two.

1. It differs from the previous one in that an inverted tin can will become the base.
2. Mark the height also along the phalanx of the fingers, draw a contour with a marker and cut holes on both sides of it so that the hand passes through.
3. It is not necessary to adjust the width - such a lamp does not have a bottom, you can light a candle and simply put a jar on top of it.
4. When you have made the side openings, turn the jar upside down and make a round hole in the center for the fire.
5. A bowl can be made from a glass from a flask, a tank from an alcohol burner, a glass salt shaker or an outlet.
6. Pour water, oil, light a candle / spirit lamp and put it inside the jar.

Through holes are needed to ventilate the air in the case

Method three.

From the materials you only need a beer can and a 2.5 mm wire 20–25 cm long.

Method four.

You need a cut beer or low tin can and a piece of wire 2.5 mm thick and 10–15 cm long. Any piece of board will go into the base. To work, you need a drill and an awl.

1. Drill a hole in the board to a depth of 1.5 cm.
2. Bend the wire with the letter G and insert the long end into the drilled plank.
3. Make two symmetrical holes in the jar, pierce it with an awl and hang it on a wire.
4. Pour water and oil into the bowl. Put a lit alcohol lamp on the board.

If the holes in the jar are loose and the bowl is heeling, you need to press the edges more tightly against the wire

Method five.

What you need:

• 2 low sprat or sprat cans;
• a sheet of thick paper A4;
• spoke;
• silicate glue;
• linen or cotton threads.

How to assemble the structure:

1. Cut sheet A4 into 4 parts, twist each strip into a tube using a knitting needle. To make the paper curl tighter, you can roll the needle on the table.
2. Glue the edge of the strip on silicate glue, iron the tube on the table a few more times.
3. Remove the knitting needle, do the same with the remaining three strips of paper. Tape paper straws first to the jar, which will be a bowl for water.
4. Then put the structure on the second jar and fix the base tubes in the same way. Coat the threads both above and below with silicate glue, so they will not be combustible.
5. Now you can pour hot water into the top jar, and put a lit candle into the bottom jar.
6. To make the oil evaporate longer, it is recommended to dilute it in an emulsifier - drop the oil into a teaspoon with salt, and then add it to the water.

The support legs are made of paper, but if the threads on which they are attached are smeared with silicate glue, the structure will be protected from fire

Method six.

The aroma lamp is a little more complicated than previous models. For manufacturing you need:

• 2 beer cans;
• small CD;
• candle-tablet;
• glue;
• long scissors;
• copper wire;
• rubber feet for crafts.

What should be done:

1. Cut off the bottom of one beer can and the neck of the other.

   Cut off the bottom of one can, the top of the other, any soft metal cans will do.

2. Dissolve the cut part into tapes 7–8 mm wide, bend the plates at a right angle.

   The cut can will be used to make the evaporator wall

3. From a metal tape, make a ring equal to the diameter of the jar, insert it into the part of the jar with stripes. The ring will be covered with stripes. If they are too long, cut off the excess, but do not throw away the pieces of metal - they will be needed for decoration.

   The metal ring is wrapped around with ribbons so that the wall is more dense

4. Insert the bottom of the second trimmed can into the ring with the bottom up. This will turn out an evaporator with a double bottom and an air gap - the oil will evaporate much more slowly than just in a tin can.

   When a second bottom is inserted into the ring, a air layer: in this design, the oil evaporates more slowly

5. Twist spirals from scraps and decorate the wall of the structure. Wire rings will also perform a decorative function - wrap them around the evaporator from above and below.

   Spirals of scraps of strips and wire around the perimeter of the can, as well as a metal overlay on top, perform a decorative function

6. cook load-bearing structure by gluing the legs to the disk.

   Rubber feet for added stability

7. Install evaporator racks from wide metal strips.

   Metal strips are bent several times and attached to the disk with glue

8. Assemble the lamp body. Pour water and oil into the bowl, put a lit candle down.

   The metal legs of the case can also be decorated with metal spirals.

From a glass jar

Aroma lamp from a glass jar, according to the principle of the device, is somewhat reminiscent of a catalytic lamp, which looks like a bottle of perfume. A model made at home will look different, but it will also decorate the interior.

Lamp with wick

What you need for the lamp:

• transparent glass jar with a tight-fitting metal lid;
• finished wick;
• awl;
• paraffin oil;
• eco-materials (branches, cones, needles, dry flowers, berries and leaves).

Put pre-selected decor elements in a jar - flowers, leaves, twigs, pour paraffin oil. Make a hole in the center of the lid in advance - such that the wick can easily pass through. When all preparatory work completed, thread the wick under the lid, lower it somewhere to the middle of the jar, maybe even a little lower. The aroma lamp is ready. Do not use it during the day, wait until the wick is saturated with oil. When burning, the aroma of fruits, herbs and spices will spread throughout the house. To enhance it, you can drop a few drops of essential oil into the jar.

In addition to alcohol or paraffin oil, you can add 3-5 drops of essential oil to fruits, berries and herbs - so that the smell is stronger

Suitable as a body old lamp incandescent.

In addition to it, you will need:

• metalwork hammer;
• thin screwdriver;
• coin of large diameter;
• glue or silicone, glue gun to it;
• cold welding;
• syringe;
• wick;
• alcohol;
• essential oil;
• match.

How to assemble such a lamp with a wick:

floating candle lamp

The floating candle option works when the jar is filled with an infusion with a strong scent, such as citrus. Therefore, it will be practical to put such an aroma lamp in the kitchen - for freshness.

For a 0.5 liter jar you will need:

• 0.5 l of alcohol or vodka;
• 1 orange;
• 1 lemon;
• candle-tablet;
• essential oil of any citrus.

Peel the fruit, cut the zest into cubes or strips, put half in a jar, leave the other for decoration. Pour a glass of alcohol and leave for a day to get a tincture. Transfer the remaining zest to the jar, set the lighted candle to float.

Clay

The lamp will last a long time if made of polymer clay and roast in the oven.

What you need:

• 150–200 g of polymer clay;
• mineral paints for painting;
• thin brush;
• stack;
• toothpick;
• wick or candle;
• foil to cover the work surface.

How to do:

1. Cover the table with foil, knead the clay until it becomes soft. Divide the mass into two unequal parts - one will go to the base, the other to the walls.
2. The bottom of the future lamp is made in the form of a circle, just roll out the smaller part into a cake 1 cm thick.
3. Form sausages from the remaining clay and stack them one on top of the other until you reach the desired height. It is convenient to level the walls with water and a stack. Next are two options:
   • you cut a large hole in the wall for a candle, several small ones for ventilation, and sculpt the top of the lamp in the form of a bowl;
   • you turn your blank into a bowl, pull out the spout where the wick will lie - you get an oil lamp.
4. The drawing is applied with a knife or a toothpick, as it is more convenient. Dry the clay in the air, then put the mold in a preheated oven to bake. For the first 10 minutes, it is recommended not to close the door so as not to test the strength of the material with sudden changes in temperature.
5. Gradually increasing the heat, bring the temperature to 200 ° C and dry the lamp for 1.5–2 hours.
6. Do not remove the finished product until the oven has completely cooled down.
7. When you take it out, the applied ornament can be painted with mineral paints - they are discreet, soft tones. If you want a more interesting decor, you can use acrylic paints.
8. It is recommended to use the aroma lamp every other day. Pour the oil mixture into the lamp in the form of a bowl, put the wick so that its edge lies in the elongated spout and set it on fire. For an aroma lamp with a candle, do not forget to preheat the water.

The oil mixture is prepared from any vegetable oil with the addition of 1-3% essential oils.

Author's master class on making aroma lamps from clay

A user under the nickname DisLikE shared her experience in making an aroma lamp-candlestick in the shape of an apple on her blog. To repeat her model, of course, you need a lot of patience and accuracy, but the finished thing, however, is beautiful.

The materials that I used

• clay;
• rubber spatula;
• stack;
• brush;
• pencil;
• paper;
• glaze for coloring;
• rolling pin;
• sponge and rags.

Progress

1. Work begins with drawing a stencil. There will be through cuts on the front wall of the aroma lamp, for which you need to draw a pattern. The stencil must be cut out immediately and then set aside.

   Using this stencil, we will then cut holes in the front wall of the aroma lamp

2. It is easier to sculpt according to ready-made sketches. We make several sketches, determine the dimensions of the finished product.
3. We knead the clay, roll it into a tight ball, make a recess on top and begin to gradually increase the cavity. It is important to ensure that the wall thickness around the entire circumference is uniform (3–6 mm).

   The walls of the workpiece should be 3–6 mm

4. Trim uneven edges with a stack and smooth with your fingers. We form a hollow ball - for this we stretch the edges, collect them in folds, cut off the excess clay. Level the top of the ball with a knife and water or a rubber spatula.

   Align the edges of the ball, and cut off the excess clay

5. Now the ordinary ball should turn into an apple. We glue a small patch on top of the liquid clay in the center (thickness is about 5 mm), press it well and smooth it, then make a through hole. The same must be done on the other side - put a patch, smooth it and make a round hole with a stack, then expand it with your finger. The holes should be symmetrical, then it is easier to outline the cut line along them.

   We make holes at the top and bottom of the workpiece to mark the border of the cut.

6. We cut off part of the future apple, lightly tap the remaining apple on the table to give it stability.

   In the large half there will be an aroma lamp, the small one needs to be rolled into a cake and decorated with slits

7. From the convex side of the workpiece, you need to cut a hole for the candle, having previously estimated that it fits in size. Do not forget that after drying, the clay shrinkage can be up to 30%, that is, the hole will become smaller.

   The hole must be made with a margin, because after firing the clay will "sit down"

8. We roll out a small part of the workpiece into a cake - it is more convenient to roll it through a rag, so the mass does not stick. We attach an apple to the workpiece, circle the outer contour. On the same contour, you need to circle the prepared stencil. We retreat 5 mm from the edge so that the hole does not fall on the seam line, and begin to cut. This will be the front wall of the aroma lamp, it is glued to the liquid clay.

   We glue the carved front wall to the workpiece on liquid clay

9. From a piece of clay we sculpt a leaf and a stalk, then we apply clay to a real leaf so that the veins are imprinted. Then the clay must be carefully separated and glued to the apple. Dry in the air, but so that the sun does not fall. Then fired, painted with glaze and fired again.

   Ceramics is always an experiment, it is difficult to predict what color will turn out

From an orange

If you want to make an aroma lamp from an orange, do it, but you need to use it right away, it won’t stand for a long time.

What you need

• 1 large orange;
• olive oil(1 tbsp. l);
• citrus essential oil (2-3 drops);
• candle-tablet;

Cut the orange, remove the pulp from both halves, grease the walls with an oil mixture. Place a lit candle at the bottom, cut a round hole at the top and connect the two halves. You can take more oil - pour it into the lower half and make an oil lamp out of an orange. A cotton thread is suitable as a wick.

Before lighting the candle, brush the orange halves with an oil mixture - olive oil and 2-3 drops of any citrus oil

The second version of the orange aroma lamp involves more ingredients, in addition to the orange you will need:

• paraffin;
• olive oil;
• citrus essential oil;
• needles;
• 2 wicks.

Cut the orange in half, remove the pulp, and grease the halves with the oil mixture. Place a wick in each bowl. In a water bath, heat the paraffin, add chopped needles or zest to it and fill the halves of the orange. The tail of the wick should protrude 1–1.5 cm from the bowl. Leave the candles to cool for several hours. It is not necessary to clean the refrigerator, the paraffin will seize unevenly. Such an aroma lamp is also prepared shortly before use.

From dough

What you need:

• 1 glass of flour;
• 0.5 cups of vegetable oil;
• 0.5 cups of water;
• wick;
• acrylic paints;
• thin brush.

How to do:

1. The dough should be dense, so do not pour all the water into the flour at once, add gradually.

   The dough is kneaded from flour and water

2. Roll out part of the dough into a cake, form the walls of the bowls from the rest, make an elongated spout for the wick. You can make a pattern with a knife or a toothpick.

   One piece of dough can make several blanks

3. To bake, preheat the oven to 200 degrees, grease a baking sheet and bake for 15 minutes.
4. Cool the product, decorate with acrylic paints, let dry.
5. Fill the lamp with oil, for example, olive, drip 5-6 drops of essential oil. Put the wick into the bowl, leaving the tip on the surface.

   Oil lamps made from dough can be used several times, but they are short-lived

How to make aroma lamp candles at home

To make candles with your own hands, you need:

• wax or paraffin, melted old candles will do;
• cotton thread on the wick;
• candle molds;
• wooden sticks or toothpicks for attaching the wick.

Let's start creating candles:

1. Grate wax (paraffin) on a coarse grater and melt in a water bath, stirring constantly. In order not to spoil the dishes, you can melt the wax in cans, in width they must be different so that one freely enters the other, in height you can take the same. If desired, wax can be tinted by adding grated wax pencils of suitable colors.

   Make sure that the paraffin is completely melted, there should not even be small pieces in the candles

2. Place a piece of cotton thread in each form, so that the end with a margin remains on top - it is convenient to fix it on a wooden stick.

   For small tablets, toothpicks are suitable as a holder.

3. When the wax is ready, pour a little at the bottom of each mold to fix the wick underneath. Well, if you still have metal tablets from old candles, they usually have a convenient wick holder.

   A little paraffin at the bottom of the mold needs to be poured in order to fix the lower edge of the wick

4. Wait about a minute for the wax on the bottom to set and fill the mold to the top.
5. Candles should stand for about a day for the wax to completely harden.
6. Then you can cut off the tip of the wick - it should be well saturated with wax. Recommended length -1–1.5 cm.

Ready-made store-bought candles can be scented, then they will replace the aroma lamp. Pick up your favorite essential oil, or use a combination of several essential oils. Lubricate the entire surface of the candle, wrap it tightly in a plastic bag and put it in a cool place for 2-3 weeks. During this time, the wax will be saturated with your favorite aroma, and when burning, you will feel it.

Do-it-yourself electric aroma lamp

The easiest way is to assemble a two-in-one unit: an aroma lamp and a lamp. From the materials you will need:

• incandescent lamp 15 W with base;
• cartridge-fork adapter;
• lamp stand;
• can;
• steel wire;
• oil tank (socket, saucer).

1. The bank will act as a lampshade. At the bottom, make a hole for the cartridge.
2. Screw in a low power lamp (15 W). At the bottom, make two small holes for the wire, and two more holes for ventilation on the side.
3. Bend the wire at the base with the letter P, then measure the same height on each side of the can and make a fold here and there.
4. Make the second fold to fix the jar on metal frame. The wire inside the jar should not interfere with the ceiling. For reliable fixation, process the ends of the wire with a soldering iron.
5. When the lamp is used as a lamp, direct the light to the side, when for aromatherapy - fix the homemade ceiling in the upward position, put a socket of a suitable diameter on top. The oil will evaporate from the heat of the lamp being turned on.

An energy-saving lamp for heating oil is not suitable; a low-power incandescent lamp must be screwed into the cartridge

How does an electric aroma lamp work - video

How to assemble a USB aroma lamp

As an aroma lamp, it is quite possible to use a heated USB stand: instead of a mug, put a saucer with water and oil. If this option is not interesting, you can assemble a design that will work on resistors.

1. The USB 2.0 port is 5V 500mA, will withstand resistance up to 10 ohms. If you count on 11-12 ohms of resistance, and there is a desire to protect the device from possible overloads, you need to get a total of 4 watts of power. The developer of the USB lamp circuit, when assembling his model, found 0.5 W resistors at home, that is, he needed 8 pieces.

   For convenience, there is a switch in the circuit to turn the aroma lamp on and off without pulling out the USB cable

2. Resistors are located in the same plane, the conclusions must be soldered.
3. It is supposed to fix the structure to a flat surface so that the heating is uniform. That is, you need to find an ordinary aroma lamp, where the oil tank does not come into contact with the body.

   Glue from heating creates impurities in the air, which is undesirable in aromatherapy, so it is better to use paper clips for fastening

4. To connect to USB, power is taken from the red and black wires. The wires are glued to the lamp body.

   The wires in the assembled lamp are not visible; that the lamp is working, it is clear from the burning LED

What can replace the aroma lamp

It is possible to aromatize the air in the room and arrange a relaxation session for yourself without an aroma lamp. Simple analogues of this device will help.

aroma stones

You can make aroma stones from salt dough.

1. For 2 cups of flour, add 1 cup of finely ground salt.
2. In glass hot water stir in any dry food coloring and 5-10 drops of essential oil.
3. To flour and water, add 1 tbsp. l vegetable oil and knead the dough.
4. It is convenient to use silicone molds for molding.
5. If desired, the dough can be decorated with a pattern, then left to dry. The stones are porous texture and long-lasting fragrance. As you exhale, it can be refreshed by adding a few drops of oil to the surface.

Aroma stones can be molded from salt dough, gypsum or clay

Gel flavor

How to make gel flavor:

1. To a glass of boiling water, add 2 tbsp. l gelatin, stir.
2. Add 1.5 tbsp. l glycerin to reduce water evaporation.
3. Take cinnamon powder or any other extract with your favorite scent and 2-3 drops of your favorite essential oil - cinnamon in this case.
4. Based on what your fragrance will smell like, choose a color. Any natural food coloring will work. You can take, for example, ground instant coffee.
5. Stir all the ingredients, pour the mixture into a glass or a jar that can be placed in a visible place in the living room.
6. After preparing the mixture, put it in a cool place for 2 hours. When you get it, decorate as you like.

Try to add only natural food colorings to the flavoring.

Aroma sticks

How to do:

1. Add 25 drops of essential oil to a glass of any odorless vegetable oil.
2. Add 2 teaspoons of alcohol and mix thoroughly.
3. Pour the mixture into a bottle or narrow-mouthed vase.
4. Put a few bamboo sticks 15–25 cm long into the oil.
5. When the aroma becomes weaker, you can add a few drops of essential oil to the bottle.

It is better to take bamboo sticks, they absorb aromas well

Fragrance with hydrogel

Hydrogel is a small elastic balls of polymers. In everyday life, they are used as a moist soil, but the flavoring from them will also come out quite good. For a sample, one bag is enough (the package is similar to the one in which beads are produced) and 7-10 drops of any essential oil.

1. Oil is added to water - what volume is needed is indicated on the label.
2. Balls are placed in water and left for 12 hours. Take a large container, because the hydrogel will increase in size.
3. When the balls are saturated with your favorite smell, transfer them to transparent vases and jars and place them around the apartment.
4. As needed, the fragrance can be refreshed by adding a solution of essential oils to the hydrogel.

To fill a vase, you need one small bag of hydrogel - the balls increase in volume by almost 100 times

flavor with soda

Making this flavor is easy:

1. Soda retains odors for a long time. Sprinkle it with a centimeter layer on the bottom of the jar.
2. Drip 7-10 drops of essential oil.
3. Close the jar with a lid and shake well.
4. Make holes in the lid for ventilation with an awl. If there is no lid, you can close the jar with a layer of foil, and make small holes with a needle.

To prepare the flavoring, soda with essential oil added to it must be tightly closed with a lid, and small holes should be made in the lid.

Making an aroma lamp with your own hands from improvised materials is a simple process. Materials are usually always on the top shelf in the pantry and in the kitchen. And if something is missing, you can adjust the model for yourself, change and add something. After all, creativity is a space for experiments.