Often happy owners of stretch ceilings decorate them with all sorts of decorative elements. But sometimes they forget that the ceiling material has a certain margin of safety. You need to know how to fix it if it breaks.

Causes of damage

The tension web is designed as follows − metal carcass over which the fabric is stretched. With this design, an unfilled layer remains between the ceiling and the fabric, due to which the canvas becomes vulnerable both from the outside and from the inside.

The material of the panel can withstand a large tensile load, but with point impacts it has low strength.

Common causes of mechanical damage to the canvas include:

• Damage from toys or other objects during the games of little pranksters. Flying remote-controlled toys are especially dangerous.
• Tracing when installing tall furniture with sharp corners.
• Large differences in air temperature in the room (relevant for a film ceiling).
• Damage with a sharp object, such as tools, resulting in a cut or puncture.
• Errors in the process of cutting the canvas or when installing the ceiling.

Particular care must be taken with the ceiling immediately after installation. This is due to the fact that during this period the canvas has a large tension.

You can also damage the surface by making a mistake when installing built-in lights and, with careless movement, by sparks from sparklers or another source of fire. In this case, the ceiling covering will be easiest to glue.

When are repairs prohibited?

There are two cases in which the repair of a stretch ceiling is prohibited.

First, do not try to repair the panel, if it fell apart at the seams. In this case, only re-tensioning the ceiling fabric by a specialist will save the situation.

Also, do not undertake repairs, when the canvas moved away from the wall. In this case, as in the previous case, a reinstallation of the ceiling by a team of specialists is required: strengthening or replacing the profile and tensioning the fabric. Additionally, it is worth determining the cause of the incident: the cloth was poorly fixed, or, conversely, the cloth was too tight. Determining the cause will help specialists quickly carry out the necessary repairs.

Both cases are covered by the warranty, and such damage must be repaired by the installer.

How to fix the ceiling?

If the damage relates to a warranty case (the warranty period has not yet expired and the rupture occurred without your participation), you should call the specialists from the company that installed the ceiling, and they will repair it for you free of charge, and also give a warranty period for the work performed! Self-repair options in case of a non-warranty case will be described below, depending on the types of ceiling.

First of all, if mechanical damage to any type of ceiling is detected, urgent measures should be taken to prevent an increase in the size of the cut. This will require double-sided / masking tape. In the absence of such materials, ordinary adhesive tape is also suitable.

If the damage is very small (puncture), then it is repaired with glue. Spreading with glue will not allow the canvas to disperse, and the damage itself will be almost imperceptible.

fabric

Recall that the fabric ceiling is made of "breathable" natural or synthetic fibers. Mechanical damage to the fabric panel is eliminated quite easily in one of two ways.

• With the help of kapron threads. Nylon threads are sold in most sewing stores, you just need to pick up desired color. This method is used if the cut is thin and has smooth edges. The cut is carefully sewn up with threads, and the task is completed!

So that the seam is not visible, you can paint over the cut water-based paint.

• With the help of a patch. It is advisable to use this method for large damages, but with a gap length of more than 30 cm, the ceiling will have to be completely changed. The material for the patch can be a piece of the material of the ceiling itself (if any), glass wall paper or, in extreme cases, a piece of dense fabric matched in color.

Any glue for the patch is suitable, provided that it is colorless. However, experts advise using cyanoacrylate-based glue.

The repair sequence is quite simple: a patch is cut out with a margin of about 2 cm along the edges, glue is applied to the patch, and then this patch is pressed against the damaged panel from the inside. Can't press too hard, this may have consequences in the form of sagging of the ceiling at the repair site.

Excess glue is removed, and after drying, the place is treated with water-based paint from the spray gun.

Film

The canvas for such a ceiling is made of polyvinyl chloride (PVC), due to which it has a smooth glossy or matte surface.

In case of mechanical damage to the PVC sheet larger than 2 cm, it is necessary to contact the specialists, who, most likely, will advise to completely replace it.

If the cut is small, you can try to repair it yourself.

The repair method depends on the location:

• Hiding a cut in a baguette groove. It can be used if the distance from the cut to the edge of the baguette does not exceed 15 cm. You will need a piece of antenna cable and glue. The cable is glued next to the cut parallel to the baguette. While the glue is curing, a building hair dryer is being prepared for use. Then the cut is heated with a hair dryer, and gently pulled to the edge of the baguette with a cable. The cable is tucked into the baguette groove using a flat and blunt tool.

Working in pairs will most likely help to avoid wrinkles and bumps. Otherwise, the webs formed during the folding process are removed in a similar way using a cable.

• Patch. This case is suitable if the cut is located far from the edges of the baguette. It is better to make a patch from the remnants of the film from the repair kit, which is usually attached to the stretch ceiling, and smear it with sealant or glue. The adhesive tape applied to the cut area is removed, and a patch is placed in its place. While it dries, it is better to additionally fix it with your hands.

There are some nuances to choosing an adhesive for a patch. It should be transparent and quickly harden without damaging the PVC fabric. Masters recommend using Cosmofen glue.

You can also use any other adhesive designed to repair stretch ceilings.

For a piece of film for a patch, you can contact the manufacturer: they usually have a large number of scraps left, and getting the right size will not be a problem.

In addition to the usual patch, there is an option to make an unusual decorative one on a damaged ceiling. A patch made in the style of wallpaper will look especially interesting.

• Installation of functional elements in a damaged place. In place of the cut, you can install an additional lamp, a deceptive ventilation duct grate or a fire alarm sensor. But first you need to protect the cut from spreading with a special plastic ring. Once the area is secured, installation of the luminaire or grille can begin.

This method is usually used in offices and public areas, but it is also applicable to the bathroom or toilet.

1. Masking with a patch or appliqué. Damage near the chandelier in the presence of imagination is masked by a decorative element, which will not only save you the hassle of replacing the ceiling, but also update the room. If you play with shape and color, you can get a great design move.
2. It is possible to hide traces of melting or burning with a special ring made of heat-resistant plastic, which is installed around the lamp. However, if the length of the damage is more than 20 cm, the canvas must be replaced.

If the defect is large, you will have to call the masters to reinstall the ceiling. But in this case, you can still save on the cost of a baguette. Do not try to repair a large defect yourself - this can lead to sad consequences.

And in any case, if you have doubts about your skills, you need to turn to professionals. The manufacturer will give advice on how best to repair the damage, or carry out repairs on their own in a short time and with a guarantee, and will also help if it is necessary to provide material for a patch (especially if the ceiling is colored).

The choice of actions is also narrowed when a ceiling is cut, which has jagged edges. Wherein after sealing the cut on the sides, you need to make its edges even. Then there are a couple of options left - masking with a lamp / lattice or any object of your choice, or a colored decorative insert.

The fabric ceiling is resistant to mechanical damage, but will not save in case of flooding. Small cuts in the fabric web are quite easily eliminated on their own. Due to the indicated properties fabric ceiling is not recommended for installation in bathrooms. If the family has small children and / or pets (cat, birds) in living quarters, it is better to install a fabric-based ceiling.

PVC ceiling will withstand flooding, but with mechanical damage, it will be problematic to repair it. Therefore, it is advised to install it in the bathroom or in the kitchen, where the likelihood of flooding is higher than in other parts of the apartment.

/ How to repair stretch ceiling after a puncture or cut?

How to repair a stretch ceiling after a puncture or cut?

Tension coatings, for all their positive qualities, have one small drawback - they are not too resistant to mechanical damage. But, despite the opinion of many, the repair of stretch ceilings does not always end with their complete replacement. Even more - some types of damage can be repaired independently.

Types and causes of damage

Most often, punctures and cuts appear on such coatings. They can arise from careless handling of the ceiling covering, and violations of the rules for its operation.

The film itself is very thin, and you can easily cut or tear it. In case of inaccurate installation of the lamp, it is possible to touch the area with a sharp tool, next to the installation site, the cabinet brought into the room will easily perforate the coating with its edge during installation, even a child playing inaccurately in the room, throwing a toy with sharp edges to the ceiling, can accidentally damage it.

Another common cause of defects on such a ceiling can be an overly powerful lamp, the heat from which can easily melt a thin film. And this applies not only to built-in models, but also to pendant chandeliers that were not installed correctly. The distance from the lamp to the plane of the ceiling should not be less than 10 centimeters.

Factory marriage can also cause gaps. Sometimes, low-quality and cheap raw materials are used for the production of stretch fabrics. It turns out a material that does not withstand tension and breaks. Most often, the stretched fabric can tear at the place of the connecting seam.

The harpoon with which the film is attached to the mounting element can also come off. This will either be a factory defect, or the reason lies in the coating being too tight, which will be an installation error.

What can be done with your own hands

Some types of damage can be repaired without calling the master. For example, the repair of a stretch ceiling, on which a small cut has appeared, can be performed without the involvement of a specialist.

For this, its size should not be more than 10 centimeters. Such a defect is eliminated by gluing the cut section with the most common construction tape. It will hold the edges of the cut, however, after gluing, it is still better to invite a specialist who will completely eliminate the defect.

In case of a rupture or a similar defect that does not exceed 2 centimeters in length, you can simply seal the hole that has arisen with a small piece of material left during the installation of the ceiling.

Punctures are also self-repairable. True, you will need to buy special glue for such operations, but some hardware stores have such a composition. The main thing is that the diameter of the puncture does not exceed 2 millimeters, otherwise, it will not work to seal it without involving the master.

In other cases, when the size of the repaired area is larger than those specified above, you will have to call a specialist who will help you cope with the problems that have arisen, or advise you to completely change the canvas. In what cases the ceiling cannot be repaired, but it is required complete replacement, we will consider further.

What needs to be repaired

The most common case when a film or fabric cannot be repaired is a tear along the weld. The scale of such a gap makes its repair impractical. With a small gap, the master may be able to repair it, but if the seam has parted over a large area, the entire canvas will have to be changed.

Places where lamps or fixtures have melted, most often, can be masked and strengthened. If this happened around the built-in lamp, the melted area around it is sealed with a special heat-resistant ring, which will mask the damaged area and strengthen it.

If a tear or cut occurs near the edge, no further than 15 centimeters from the baguette, you can simply remove it. To do this, the stretched material is removed from the baguette that fastens it, and cut off along the entire length, capturing the area with the cut. After that, the canvas is stretched again and tucked into a baguette.

Relatively small defects that are far enough from the edge can also be masked. Where a hole or puncture has appeared, you can embed another lamp or ventilation grill. In general, there is no difference what to install, as long as the place of the gap is completely hidden by the installed device or decorative element.

If the tension cover is not installed correctly, another type of damage may occur - the separation of the harpoon, which secures the fabric in the baguette. This defect cannot be eliminated on its own - you will need to call the wizard, who, in most cases, will fix the problem in a short time.

It is much worse when this happened due to too much tension in the fabric. It could be cut incorrectly, and then, the entire canvas will need to be replaced.

When flooded by neighbors from above, the stretched film will almost inevitably sag. It can be re-tensioned, although it will require the arrival of a master with a heat gun. If not stretched PVC film, and the fabric, then on it, after flooding, ugly spots appear, which, unfortunately, cannot be completely removed. This cover needs to be replaced.

To better understand how a stretch ceiling is repaired, when, for example, a cut occurs, you can watch the video below.

Here you can just see how a small gust of stretched fabric is eliminated, near the fastening baguette. A complete replacement was not required - it was done by pulling on one side, with the transfer of the fastening element to a new location.

Conclusion

Not always, the occurrence of damage to the tensioned material will lead to its complete replacement. Some types of defects can be repaired, saving a significant amount. However, if the tear or cut is large enough, it may be more economical to replace the entire fabric.

In many apartments and private houses, stretch fabrics are used as ceiling finishes. This is due to the ease of hiding defects on concrete slabs and the low cost of finishing. External impact on the canvas can lead to damage, so it is recommended that you read the information on how to glue the stretch ceiling after a cut.

Defects in the material occur for various reasons. Most often, a stretch ceiling breaks in the following situations:

• negligence in the course of construction installation work, due to which a sharp spatula or other tool leaves a cut;
• dismantling and installation window structures, moving furniture and other work in which there is an inaccurate touch to the material;
• installation of an initially defective low-quality canvas, improperly executed cutting of the ceiling;
• the formation of bulges and subsequent cracking during flooding as a result of leaking plumbing in the apartment from above;
• long-term operation of the material with unstable indicators of temperature and humidity in the room.

Do-it-yourself puncture repair methods

It is not advisable to eliminate large defects in the tensile structure, since it will be cheaper and less labor-intensive to tighten new material. In this case, small punctures and cuts can be masked if, immediately after the defect occurs, it is possible to prevent spreading. Having noticed a hole in the canvas, you need to seal the damaged area with tape or electrical tape and proceed to further work. You can eliminate the puncture yourself with the help of a fabric or a PVC sheet, and these methods are performed in different ways.

Textile

In the absence of a patch, you can choose a piece of fabric that is suitable in shade and texture. When the search for matter is unsuccessful, it is worth contacting the company that was engaged in the installation of the ceiling in order to find a similar or similar fabric in color. Then the damage is repaired according to the following instructions:

1. Measure the dimensions of the cut and adjust the patch. It is recommended to leave a couple of extra centimeters on each edge of the defect.
2. A transparent layer of adhesive solution is applied to the surface of the patch on one side.
3. The material is applied to the damaged area of ​​the stretch coating and carefully smoothed out.
4. With a little effort, the patch is pressed against the canvas. Pressing too hard can cause the adhesive to come out and cause the treatment site to sag.
5. When the glue dries and the patch will hold securely, if necessary, the surface of the canvas is partially painted for additional masking.

PVC sheet

With the help of a PVC cloth, damages no longer than 2 cm long can be repaired. The process of masking defects is similar to the method that involves the use of a fabric patch, but has a number of features. Including:

• PVC film cannot be repainted in a different color, so you need to prepare a patch from the material remaining after the installation work, or independently come up with an application to match or contrast;
• if you cannot find a suitable patch, you can close the cut with a decorative element - a butterfly, a flower, an abstract geometric figure;
• the slots on the PVC material tend to grow rapidly, so the adhesive tape is removed from the damaged area immediately before gluing the permanent patch.

Adhesive selection

You can fix the patch on the damaged area of ​​the stretch ceiling with different types of glue.

Regardless of the brand chosen, the adhesive solution must necessarily meet the basic requirements: be transparent so as not to leave stains on the ceiling, instantly harden and not destroy the surface of the tension coating.

Cosmofen

Clay "Cosmofen", according to many experts, is considered the best option for stretch fabrics. The solution is a universal agent and ensures the bonding of the material in a few seconds, leaving no residue. Complete drying occurs 15-16 hours after application to the material. It is not recommended to use "Cosmofen" only for gluing cuts on the ceiling with a porous surface, as this may affect the quality of gluing.

Cyanoacrylate solution is not susceptible to sudden changes in temperature and moisture, which allows it to be used in rooms with any conditions. The adhesive comes in a small package and is economically consumed - a few grams of the substance is enough to fix the patch. You can buy Cosmofen at any hardware store or building materials department.

Somafix

Somafix Universal Adhesive Activator instantly forms a heavy-duty bond between the patch and the stretch fabric. The final setting time does not exceed 10 seconds. The solution contains an ethyl cyanoacrylate gel and a hardener aerosol. After application, Somafix glue does not spread, remains transparent and invisible. To ensure a good bond, the work surface must be dusted and dry before using the Somafix solution.

"Contact"

One-component super-glue "Contact" forms a strong seam and dries almost immediately after application. The formed connection differs in durability, resistance to influence of organic solvents and temperature differences.

Loctite

Loctite Instant Adhesive is a one component solution that cures at room temperature. Different types adhesives produced under the Loctite brand differ in viscosity. The solution is used for durable bonding of a large number of materials, including stretch fabrics. The setting speed is a few seconds.

Cosmoplast

Cosmoplast's instant cyanoacrylate adhesive forms a strong bond with just a few drops. The practical polyethylene packaging ensures precise application on the tension coating patch. The advantages of the adhesive solution "Cosmoplast" include:

• hard adhesive seam;
• resistance to a humid environment and temperature extremes;
• no solvents in the composition;
• fast fixation;
• UV resistance.

How to glue a cut on a stretch ceiling

The method of gluing a cut on a stretch coating depends on its size and distance from the walls. In each case, the elimination of the defect has its own peculiarities.

Small incisions can be sewn up with nylon threads. To mask the slot, you need to pick up threads of a suitable color. If the resulting seam remains noticeable, it is allowed to paint it with water-based paint using an airbrush.

Large damage is more problematic to repair, so for quality result it is better to take professional help.

As a temporary solution to the problem, you need to seal the damaged area with tape. This precaution helps prevent widening of the cut until it is completely healed.

When the cut is close to the wall, it can be repaired by pulling a small area of ​​the canvas. Thus, the hole remains in the baguette groove and is visually imperceptible. To pull the matter, you will need to use high-quality glue and a piece of antenna cable. To eliminate the cut, a cable no longer than 10 cm is glued parallel to the baguette to the edge of the damage. When the glue hardens, the coating at the work site is treated with a hairdryer. Then the cable is pulled up and hidden in the baguette groove. If folds have formed in other places of the stretch ceiling, they will be removed according to similar instructions.

A cut located far from the wall is eliminated with a patch. To do this, use one of the previously described methods, selecting a suitable patch and fixing it on the damaged area.

How to seal a hole at home

The best way to restore a stretch ceiling at home is to use a patch. This option is optimal when the gap is not even, but slightly rounded or diverges in different directions. Applying adhesive to the patch is allowed only if the shape of the coating is retained after the defect has occurred. When sticking a patch on a hole in the material, you need to be as careful as possible so that the restored place does not stand out too much against the general background.

Ways to decorate a large defect

The appearance of large defects on the stretch ceiling complicates the task of restoration and repair of damage. An ordinary patch will not help restore the integrity of the matter, so you need to use non-standard ways to decorate the damaged area.

Applications

Using the application helps not only to visually hide the slit on the fabric, but also decorate the space. Customers can choose from a wide variety of applications made in the form of butterflies, flowers and patterns. For the production of decorative applications different materials, but the most popular are plastic and vinyl products. They are non-toxic, attractive in appearance, easy to stick and remove.

It is important to understand that the application will hide the defect, but first you need to fix it. For this purpose, an adhesive solution and a stationery stapler are suitable. The edges of the slot are connected with paper clips and smeared with glue to enhance strength. The selected application is applied on top, fixing it with plastic glue.

Lamp device

In place of the damaged matter, you can place a spotlight, which will not only hide the defect, but also improve the lighting in the room. To mount the lamp step by step, perform the following steps:

1. A rounded profile is applied to the canvas at the site of damage and markings are made. Then the slot is leveled along the drawn circle and the profile is finally installed.
2. Racks are leveled so that they coincide in level with the canvas. Through the cut hole, the electrical wiring is led out and the lamp is fixed to it, having previously put on thermal rings on its body to prevent contact between the lighting device and the tension coating.
3. After installation, the lamp is leveled, the lamp is screwed into it and the performance is checked.

Ventilation grill installation

Arrangement of ventilation on the tension cover not only hides defects, but also helps to preserve the original appearance of the material. Installing ventilation grilles is no more difficult than installing fixtures, so you can do the work yourself if you follow the step-by-step instructions. Installation of ventilation consists of the following stages:

1. The place of damage to the canvas is pulled together with nylon threads. This is necessary so that the cut does not expand during further work.
2. In places where the grating will come into contact with the canvas, a tread ring is fixed with glue, preventing further tearing of the fabric.
3. When the ring is glued, the remnants of the coating are cut off inside it.
4. If the room is equipped with an air duct system, the pipe is led out through the hole and covered with a ventilation grill, fixing it on the back of the ring. For natural ventilation, where there is no automated air duct, simply put the grate on the tread ring.

Ventilation grilles are available in various colors and configurations, which allows you to find discreet options. Not finding the right shade, you can process the front side of the product with water-based paint in a suitable color.

In what cases it is impossible to glue the coating

There are a number of situations when it is not even necessary to try to repair damage on a tension coating. experienced craftsmen. These situations include:

1. Fabric tear at the seam. Bonding the damaged area will only exacerbate the problem, so the material must be stretched from scratch.
2. Detachment of the cover from the wall. In these circumstances, it becomes necessary to dismantle the ceiling, strengthen the profile / baguette, or install a new one.

the only right decision there will be an appeal to the company that was engaged in the installation, to replace the coating or return the funds.

To reduce the risk of damage to the stretch ceiling, in the first place, it is possible through careful handling. During construction and repair work, moving furniture, installing windows, do not touch the ceiling with bulky and sharp objects. For safety reasons, you can build a protective structure above the ceiling.

For prevention, it is recommended to periodically inspect the surface of the tension coating and take care of it. Clean the canvas with a soft sponge, lint-free cloth and detergent without abrasive components. The content of solvents and abrasive particles in the cleaning agent will damage the cloth and lose its appearance.

As a ceiling finish, stretch ceilings are very often used, which have a lot of advantages - they look good, provide good sound insulation, protect the apartment from flooding from above and do not require special care. However, no matter how good tension structures are, they also have disadvantages, and the main one is the extremely low strength of the web.

Of course, a good canvas can withstand stretching and pressure well, but the slightest touch with a sharp or angular object will leave a noticeable hole on the ceiling surface, which will expand over time. In such cases, the owners have a question about how to repair a cut on a stretch ceiling - and this is what will be discussed in this article.

Types of paintings

The canvas can be damaged by mass different ways- for example, careless movements during the cleaning process, or during some kind of game. When determining how to close a cut on a stretch ceiling, you need to consider what kind of material was used as a canvas, so you first have to figure out all the materials suitable for this purpose.

All canvases are divided into two main types:

1. fabric. This option is a polyester fabric that is impregnated special composition from polymers. For the manufacture of fabrics, synthetic fibers are used, slightly diluted with natural threads. The thickness of such a web is on average about 0.37 mm. However, in this article we are talking primarily about the strength of the material and the possibility of its repair. Fabric webs in this regard are quite convenient - they practically do not stretch and have a porous structure, thanks to which it is quite simple to repair such material. Replacement of the entire blade is only necessary if the size of the cut exceeds 30 cm.
2. PVC. This material is based on polyvinyl chloride fibers. With a relatively small thickness (from 0.17 to 0.22 mm), the material has good strength. It can withstand temperatures up to +100 degrees, and when this indicator is exceeded, it begins to melt. In the case of sudden and significant temperature changes, it can crack, as a result of which the strength of the web decreases. PVC fabric has good elasticity, allowing you to stretch the material if necessary. However, you should not overdo it with this - strong stretching and pressure on the film can lead to a change in its characteristics, and after repair it will be deformed.

Despite the similarity of composition and application, the presented materials have serious differences, which determine the repair methods suitable for each specific situation.

Causes of damage

As noted above, any canvas used for stretch ceilings initially has a fairly high strength - but it does not manifest itself at all when it comes to piercing and cutting effects. The biggest danger that a stretch ceiling can be exposed to is a simple cut. Even a small cut on the stretch ceiling violates the integrity of the canvas and leads to a complete deformation of the ceiling surface.

To figure out how to fix a cut on a stretch ceiling, you need to handle it carefully, starting from the stage of its installation. However, during operation, accuracy and understanding of the properties of the material are also required - for example, for several days after installation, the material will adapt to new conditions, so you should refrain from any serious work in a room with a newly installed ceiling.

Most often, a cut on a stretch ceiling occurs for the following reasons:

• Mistakes were made during installation, low-quality material was used for arranging the ceiling, which, in addition, was also incorrectly cut;
• Careless rearrangement of large furniture - for example, a cabinet that has sharp edges that can damage the ceiling;
• It is strongly not recommended to install stretch ceilings in children's rooms - any active games will sooner or later lead to accidental damage to the canvas;
• Very often, the ceiling is accidentally damaged due to careless handling of sharp objects in the room - for example, with further repairs to the room, you can pierce the canvas with a screwdriver or cut it with a grinder.

There can be quite a few ways to damage the canvas, and as a result of such an impact, you will definitely have to figure out how to fix a cut on a stretch ceiling.

Temporary covering of the ceiling

To perform a temporary repair of a stretch ceiling cut, you need to prepare a set of materials and tools, which includes:

• Masking tape or fabric tape;
• Scissors, regular tape and a small piece of cable about 10 cm long;
• A patch from the remnants of the canvas;
• Nylon thread, needle, varnish and paint;
• Hairdryer and spatula.

This entire set is necessary for the primary, temporary sealing of the cut. The fact is that small cuts on the surface of the stretched canvas tend to gradually spread, so first of all, measures must be taken to localize the damage so that there is no further rupture of the stretch ceiling.

Small cuts on any canvas can be dealt with very simply - just connect the edges of the cut with tape. To close pinholes no larger than 2 cm, you can even use ordinary glue. This option will not be a panacea - it is only suitable as a temporary solution, and in the future you will still have to do a full repair of the stretch ceiling cut with your own hands.

Film ceiling cut repair

The first step is to understand how big the slot in the stretch ceiling is. This is a very important point - if the size of the damage exceeds 15 cm, then the material can no longer be repaired, and it will have to be completely changed. You also need to evaluate how far the cut is from the wall - if it is removed no further than 20 cm, then you can try to drag the canvas and hide the damaged area in a baguette.

In the latter case, the repair of stretch ceilings after a do-it-yourself cut will look like this:

• An antenna cable is glued directly over the cut;
• When the glue has hardened, the canvas needs to be heated with a hairdryer;
• The canvas is carefully pulled up to the baguette and tucked into it with a spatula;
• Next, the material needs to be straightened and leveled so that it looks like new.

You also need to figure out what to do if you cut the stretch ceiling at a distance from the wall. Under such conditions, you will have to use more complex repair methods that require detailed consideration.

Applying a patch

For the manufacture of the patch, a piece of the same canvas that was used in the ceiling itself is used. The dimensions of the workpiece should be a couple of centimeters larger than the size of the damaged area. Such an amount of glue is applied to the patch so that its excess does not eventually come out - it will be impossible to wipe them off the ceiling surface, and appearance designs will be damaged.

The patch is applied to the damaged area and pressed. Excessive effort during this operation is not necessary - folds will appear. The glued patch should be carefully smoothed out after the glue has set a little so that the surface is as even as possible. On this, the repair of the stretch ceiling cut can be completed, or you can go even further in the desire to return good decorative properties to the ceiling.

So, on the areas repaired with a patch, you can later apply a PVC application or some kind of drawing. Individual patches of PVC are quite suitable for use as patches - but you should always glue them not only over the cut, but also on entire sections of the canvas so that individual places do not stand out. The same goes for simple images.

Before you remove the cut on the stretch ceiling, you need to pick up correct option glue. There are no special requirements for the glue used. By and large, there are only two parameters - the quality of fastening and color. Most modern adhesives are colorless and perfectly hold the surfaces to be joined, so all such options are suitable for repairing stretch ceilings.

It is best to use the following types of glue:

• Universal glue - reliable, strong enough and durable;
• Specialized adhesive, which is divided into compositions for heavy, medium and light materials;
• Regular superglue.

Mounting the ring for the lamp

This method is relevant only for vinyl canvases. A special ring is glued onto the damaged area, into which lamps are usually mounted. When the thermal ring is glued, a canvas is cut out along its inner perimeter. If the damage is large enough, then nothing will have to be cut.

Using this repair method, you need to take into account that the lamp will eventually be mounted in the same way as any other lighting fixture on a stretch ceiling. Instead of lamps, you can use a fake ventilation grill or smoke detectors to mask damage - they are installed in a similar way.

Fabric stretch ceiling repair

It is much easier to work with fabric stretch ceilings, which is due to the fairly stable structure of the materials used. To determine the repair method, you need to figure out how big the damage is.

There are the following ways to repair a cut on a fabric ceiling:

1. The first method involves the use of nylon threads of the corresponding color. Stepping back from the edge of the damage at least 3 mm, you need to pull the canvas. The finished seam must be treated with an acrylic-based sealant and a patch applied to this place, which will restore the texture of the fabric. After the sealant has completely cured, the repaired area can be painted or applied to it with a pattern.
2. On damage with big sizes, the seam will be too noticeable, so it would be best to use a patch that is cut from fabric or fiberglass. The patch is glued to its place with glue. You need to glue the patch on the inside of the canvas, and when installing the patch, you do not need to put too much pressure on it so that the ceiling does not sag after the repair. In the future, it will be possible to cover the material with water-based paint - it will mask all traces of repair.
3. Under suitable conditions, you can use a thermal ring for repairs. The damage repair technology looks exactly the same as in the case of film ceilings.

Possible defects

Illiterate repair work in the vast majority of cases leads to the appearance of new damage. Of course, even in the most difficult cases, there are options for solving the problem, so you need to first assess how damaged the ceiling is.

There are a number of defects that cannot be dealt with:

• The canvas, which has completely come apart at the seams, will have to be completely stretched again - gluing in this case will not help;
• If the ceiling is torn off the wall, then the canvas will have to be pulled over, and the stretch ceiling structure will need to be strengthened;
• If only one baguette came off, then it can be carefully attached to its place without touching the canvas.

To make the stretch ceiling as reliable as possible, when installing and repairing it, you should follow a number of recommendations:

1. To better keep the patches in place, the repaired areas must first be degreased. For these purposes, a special spray or mild detergent is suitable.
2. You need to understand what to do with a cut on a stretch ceiling. Having noticed a cut, it is necessary to immediately take measures to prevent its expansion - for example, by fastening the edges of the canvas with adhesive tape.
3. On a ceiling with photo printing, it makes sense to remove a cut only if it will not be noticeable after repair. If the pattern is deformed as a result of repair work, then the most appropriate solution would be a complete replacement of the canvas.
4. The air temperature in the room must correspond to the allowable for a particular material (as a rule, a temperature from 0 to 50 degrees is quite comfortable for canvases).
5. If the room is damp, then you will need to regularly remove rust. A flannel cloth and a glass cleaner that does not contain abrasives are best for cleaning the canvas.
6. Spotlights installed in a stretch ceiling must have an allowable power. Conventional lamps up to 60 W and halogen lamps less than 35 W are suitable for fabric. The film web has a lower power threshold - incandescent lamps can have a power of no more than 40 W, and halogen lamps - up to 20 W.
7. In order for the repair to be of the highest quality, it would be best to turn to professionals who will find and implement optimal solution Problems.

Conclusion

Repairing a stretch ceiling with a cut is a completely feasible task, available for self-fulfillment. Before you repair a stretch ceiling from a cut, you need to assess the extent of the damage, take into account the features of the web, and only then take appropriate measures to fix the problem. Proper performance of such work will restore the ceiling and return it to its original appearance.

If you decide to install a stretch ceiling, which is so popular now, in your home or apartment, then you should be ready to repair it. If the damage is severe, it may need to be completely replaced. Not even experts can help here. But if we are talking about minor defects, then you can fix the stretch ceiling from the cut yourself. The ceiling made of PVC film or fabric cloth has high strength and elasticity. However, this does not protect it from damage.

Causes of the defect

Before you start repairing stretch ceilings after a cut, you should find out for yourself why such defects can occur. In addition, there are many types of damage. Some of them arise due to the fault of the production, and not the owner. The main types of damage are:

1. A cut that mainly results from contact with objects that are sharp at the edges.
2. Breakthrough of the film, which damages almost the entire ceiling.
3. Sagging ceiling.
4. A tear that runs along the seam of the film.
5. Puncture.
6. Detach a profile.

Such consequences can be the result of both improper installation and careless handling of the ceiling by the owner of the apartment or house.

Among the injuries that occur most often are cuts and punctures. And then the owner of the apartment has a question: how to repair a cut on a stretch ceiling? At the same time, there is a desire to do the job as quickly as possible and spend money on repairs to a minimum. However, this will directly depend on what the web material was and what size the cut was.

Before starting work, count all the pros and cons. After all, if there is any doubt about the repair, it is important to consult with an experienced specialist in this field. This will help to avoid annoying mistakes. However, this article provides some simple ways elimination of damage that will help you, even in the absence of experience, to make repairs correctly and efficiently.

Ceiling type: individual approach

There are many ways to repair damage. And most often their choice is influenced by what material the ceiling is made of. If it is fabric, then it is easiest to correct the defect. There are at least 2 options:

• We buy kapron threads. They should be very similar in color to the color of the fabric. With these threads, it is necessary to darn the hole as beautifully as possible. If necessary, the seam is painted over with paint.
• We make a payment. For such a case, we take a small piece of fabric or glass wallpaper. You will also need colorless glue. The patch is glued on the other side of the canvas. Each edge must then be pressed tightly. Now the entire ceiling is treated with a water-based emulsion, using a spray gun.

If the ceiling is made of PVC film, then it is not so easy to repair it. First, it is important to determine where the cut occurred, and what is its size.

PVC film - ways to eliminate damage

Repair of a stretch ceiling in case of a cut is carried out in a certain sequence. The easiest way to repair the film is if the cut is near the wall - in the region of 15 cm. Then it is necessary to dismantle the canvas from the part where the cut occurred. The material that is damaged is cut off along the entire length. In this case, the film must be stretched and filled inside the profile. In this case, the surface practically does not change its appearance.

In the case when the flaw appeared a little further from the wall, it is impossible to drag the ceiling. After all, this will only ruin the coating. There are some tricks to help troubleshoot:

• The place of a small cut is covered with an additional lamp or a grill for ventilation.
• To cover the place of large damage, use a color application or a panel.

If the puncture is very small, up to 2 mm, then use special glue. Thanks to its use, the canvas will disperse further and the cut will be completely invisible to the eyes. If the puncture is large in size, then it is eliminated in the same way as a cut.

Fabric base: eliminate cuts

As we saw, repairing a stretch ceiling when cut with one's own hand is easiest to do if it is a fabric fabric. Using a nylon thread and a piece of fabric tape, you can make a cut on the ceiling sheet almost invisible. And if after the repair they are still noticeable, then paint will help to smooth out any flaws.

Disadvantages on the film: do it yourself

In order to avoid further tearing of the ceiling, due to its tension, it is necessary to use adhesive tape or insulating tape. So the damage will not increase and will not bring even more problems. When you notice that the length of the cut is more than 2 cm, then you should contact the master. After all, a person without experience will not be able to cope with such damage. The specialist will determine whether it is worth doing repairs and how much it will cost. Sometimes a complete replacement is necessary.

There are several other options for eliminating small cuts, in addition to those described above. Here are some examples:

1. If the damage is located near the wall, then it is eliminated by removing it into the groove of the baguette. To do this, take about 10 cm of cable, as well as glue. Glue is applied as close as possible to the cut and is done parallel to the baguette. Now we wait a while for the glue to dry. Heat up the film with a hair dryer. After that, with smooth movements of the hand, the cable is pulled up to the wall. It is tucked into the groove with a blunt flat tool. If there are wrinkles, then they can be easily eliminated by the same method. That is, glue is applied near the fold, heated and pulled to the groove.
2. For cuts further than the wall, use a patch. The adhesive tape that was on the cut must be removed and a patch applied on top of it. It is also important to fix it in the required position for some time.

Sometimes troubles with a stretch ceiling prompt you to make repairs in the room. To do this, the design changes somewhat. You can use an application with a contrasting color to mask the cut. The color should fit into the interior. Well, if it is the same as the curtains or furniture upholstery.

Repair of tearing off the canvas near the lamp

Lamps play a big role when buying a stretch ceiling. After all, they make the lighting effects more expressive. It is worth remembering that the power of such lamps should be no more than 40 watts. Do not install them close to the surface. After all, the closer they are to the canvas, the more likely it is that a break will occur. With such trouble, it is usually recommended completely replace the canvas.

But there are others effective methods. To do this, install a plastic ring. Thanks to him, you can cover part of the fragments of the canvas that have melted near the lamp. You can see how the stretch ceiling is being repaired with a cut in the video.

Defects and how to eliminate them

When starting to repair the ceiling, it is worth weighing whether your experience will allow you to do the job efficiently. For example, if there was a break in the ceiling along the seam, then this is just a complete replacement.. And if a baguette ruptures, then you need to know how to properly install additional spacers. When the ceiling began to sag, then you need to make it a constriction.

With these tips, you can quality repair stretch ceiling with your own hands.