Do-it-yourself electric flycatcher. Effective ways: how to get rid of fruit flies. How to make your own fly trap with an ultraviolet flashlight

There is a huge number of diverse fly traps from domestic and foreign manufacturers. They differ in principle of action, design, efficiency, price. You can easily make a fly trap with your own hands from improvised means or with minimal financial costs.

Types of traps, principle of operation

Fly traps do not harm human health, are environmentally friendly, and are not inferior in effectiveness to purchased drugs. The devices are easy to use, they are sold in the warm season all over the world. affordable price. On the Internet you can find a lot of tips for making homemade traps without much effort.

Popular types of traps are:

• insecticidal fly exterminator;
• ultraviolet destroyer;
• electronic fly swatter;
• window fly trap;
• bait-trap.

In the process of selecting a trap, it is necessary to take into account the radius of influence, the area of ​​\u200b\u200bthe room in which the device will be used.

• Ultraviolet fly killers lure with ultraviolet light. Flying up to the device, the insect receives a discharge of current from the grid, behind which there are lamps. When they die, the flies accumulate in a pull-out tray that is easy to clean.
• The fly trap is made on the basis of the container inside which the bait is located. Does not consist of poisons, other harmful substances. Once trapped, the fly cannot get back out. Some types of traps are reinforced with a thermal effect or emit carbon dioxide, simulating human breathing. This is what attracts pests.
• The electric fly swatter is a type of fly swatter. The principle of operation is identical. Due to the glow, it lures insects to itself, after which it kills them with a current discharge. For people, the device is safe to use.
• Window fly traps are made to order. Both sides of the trap are coated with a sticky compound. One side of the trap is attached to the window, the other duct tape attracts flies. It is recommended to cling to the windows on the sunny side of the house for the best effect. Change as insects stick. The manufacturer indicates that such a device lasts for six months.

On a note!

The principle of operation of absolutely all traps is to attract insects,. The destruction process itself is different. Attract flies with heat, smells, light. Based on the mechanism of action of purchased devices, structures, you can make them yourself.

Conditionally divided into two types - baits, Velcro. Inside the baits you need to put favorite treat flies. Use jam, rotten fruits, vegetables, honey. It is better not to use fish, meat because it quickly begins to emit a fetid odor. For flies, such aromas are a joy, but it is impossible for a person to be near such bait.

You can be creative, come up with your own effective design.

Electric fly trap at home

In most cases, the device is bought, but you can do it yourself.

You will need:

• light bulb housekeeper;
• high voltage module;
• insulating tape;
• hot glue;
• finger battery.

Manufacturing process:

1. Disassemble the light bulb so that there remains a plastic case, a bulb with tubes that are attached to the case.
2. Make a through hole in the plastic, take an aluminum wire, thread it through one of the holes.
3. Wrap the wire around the light bulb, remove all unnecessary. Do the same with the second hole.
4. There are 2 wires inside the base. Wrap one around the tip of the wire and bend, leaving 2 contacts.
5. Connect the high-voltage module to the finger battery through the switch.
6. Make holes, insert the switch, the module into the housing.
7. It is necessary to solder the wiring, wrap the soldered wires of the module to the battery with electrical tape, and glue the module to the base with hot glue.
8. Insert a light bulb into the base so that the contacts touch the contacts of the module, screw it in and turn on the device.

On a note!

Flying into the light of an electric trap, pests will be struck by a current discharge upon contact with it. The method is very effective, but also dangerous. Not recommended for use near small children, pets. There is one minus - as soon as the battery is dead, the device needs to be redone. Not everyone wants to mess around with the preparation of a complex design. Most people prefer to buy a ready-made device.

Popular commercial fly traps

When choosing effective remedy you should pay attention to the following products:

• Exterminator Pomel DUO LT-60 (Poland). A trap that uses replaceable sticky paper cartridges instead of an electrical discharge. By emitting ultraviolet radiation, it lures insects to itself, which, when ingested, stick to the paper. Due to the absence of a spark, this exterminator can be used on explosive objects. It receives power from the mains 220 V. In the middle there are 4 lamps of 15 W each, 2 replaceable sticky paper cartridges. Device dimensions 350x470x120 mm. The price is about 2000 rubles.
• Light trap Economy 14 w (Poland). Effectively fights flies, mosquitoes. Inside is a cartridge with sticky paper. Insects, flying into the light, fall into a trap, immediately sticking to the trap. Ideal for children's rooms, bedrooms, kitchens. Range up to 40 sq. m. Works from the socket. Device parameters 65x280x330 mm. The cost is about 2500 rubles.
• Destroyer N'oveen IKN-36 IPX4 (Poland). The principle of operation is the same as that of other exterminators. Suitable for indoor and outdoor use. It is waterproof, so destruction occurs even in rainy weather. For the best effect, you need to hang it away from other light sources at a height of up to 2 m. The range is up to 120 square meters. m. Dimensions 510x135x310 mm. The price is about 3000 rubles.
• Vaco window trap (Poland). Attaches to window with adhesive. Insects are attracted to the pheromones that come from this trap, and when they sit on it, they stick tightly. Change as the tape sticks with flies. Valid up to 6 months. The price is about 50 rubles.

Which traps to use indoors: purchased or homemade - the decision is individual. It is necessary to focus on efficiency, safety, ease of use. An electric fly trap is more powerful, but also the most expensive in price.

One of the most annoying and ubiquitous insects is the fly, which often flies into our homes. Sitting on a variety of surfaces and food, it carries on its paws a lot of pathogenic bacteria that can harm human health. The obsessive buzzing of an intruder often irritates us. However, not everyone can destroy a fast and agile fly with a fly swatter. In this case, simple and convenient fly traps will come to the rescue, which you can make yourself.

Simple homemade flycatchers

Before you start hunting for flies, you need to determine what attracts them to our homes. First of all, these are products that are the optimal breeding ground and source of nutrition. Slightly spoiled meat and fish, which have a smell, will instantly attract the attention of flies eager to lay their eggs. It is for this reason that we most often cannot do without such baits.

There are simple fly traps that can be made from improvised materials without special skills:

• traps operating on the basis of baits;
• traps with poisonous baits;
• sticky traps;
• electric shock flycatcher.

However, the process of creating an electric shock flytrap is not simple and requires certain experience and professional skills.

Trap them plastic bottle

It is easy to make a flytrap from an ordinary plastic bottle. To attract an insect, an edible bait with a fragrant smell is used:

• liquid jam;
• Coca Cola;
• any sugar-containing liquid that has undergone a fermentation process. For this purpose, you can add a little yeast to sweetened water;
• wine;
• beer;
• rotten fruits.

Advice. Do not use meat and fish products as bait, the stench will quickly spread throughout the room.

To make a trap you will need:

1. Cut a plastic bottle into two equal parts.
2. Turn the upper part of the bottle, resembling a funnel, upside down and place it in the lower part. In this case, the neck of the bottle should not touch its bottom. For best results, keep in mind that the ratio of the height of the top and bottom of the bottle should be 1:2.
3. To ensure structural strength, secure the funnel using a stapler or tape.
4. Pour liquid bait into the bottom of the bottle.
5. Set up the trap where the insects are most likely to be.

Advice. If you add ground pepper or any granular insecticidal preparation to the sweet liquid, it will turn into a poisonous bait for the flies that have fallen into the trap.

Video: making a trap from a plastic bottle

Glass jar trap

A similar trap can be made from glass jar and a plastic funnel:

1. Take a jar right size, and put slightly rotten sweet fruits on its bottom.
2. Turn the funnel upside down and place it on the jar in the form of a makeshift lid.
3. Secure the funnel with duct tape or duct tape, trying to seal all the cracks.

The jar can be installed near the trash can or on the windowsill, because flies always fly towards the light.

With the help of such a trap, you can catch not only flies, but also wasps and mosquitoes.

Plastic container trap

To make a simple and reliable fly trap, a small transparent plastic container can come in handy. For this purpose, you can use plastic cups or special containers for food:

1. Place edible bait at the bottom of the container.
2. Tighten the top of the container with cling film, making small holes in it with a knife.

The fly, smelling the food, will try to penetrate the plastic container through the holes in the film, however, the insect will not be able to get out.

Important! Try to dispose of the contents of the traps from time to time by removing trapped insects and changing baits. Otherwise, such structures will become sources of unsanitary conditions.

Duct tape

Sticky tapes are especially popular among fly hunters.
Prepare a composition of the following components:

• rosin or pine resin, previously melted in a water bath - 2 parts;
• linen or Castor oil- 1 part;
• sugar syrup or honey - a small amount for taste.

Actions:

1. Mix all of the above ingredients.
2. Using parchment, craft paper or oilcloth, cut ribbons 3-4 cm thick.
3. Apply adhesive to paper tapes.
4. Hang the ribbons in places where insects are most likely to be found.

Video: sticky mitten fly trap

Advice. As an adhesive, you can also use specialized ALT glue, designed to control rodents.

"Folk" fly repellers - plastic bags with water

Another way to keep flies away from your home is to hang plastic water bags near doors and open windows. The inventor of this method is a Swedish citizen named Sten Lindqvist, who claims that the effectiveness of this method is comparable to that of mosquito nets.
To create such a bleach, you will need:

• transparent cellophane bag;
• pure water;
• a few coins.

Actions:

1. Pour water into the bag.
2. Dip the shiny small coins into the bag.
3. Tie the bag tightly.
4. Hang it from the side of the street near front door or an open window.

The principle of operation of such a device is based on the specifics of the vision of an insect. Perhaps the sunlight that hits the coins through the water column blinds the flies, making your house invisible to them.

Video: the most harmless way to get rid of flies

However, reviews about the effectiveness of such a repeller are very contradictory.

At the weekend I was hunting with a friend in his estate, a huge wooden building (timber timber) with many rooms and living rooms. So, entering the living room, he butted a transparent plastic bag with water tied to the ceiling with his forehead. To a silent question, the friend's wife explained that this repels flies, which are countless in this winter. She saw this in Spain butcher shops where they sell jamon. So the further showed that there were no flies in the rooms with packages, in others (without packages) they sluggishly flew in sufficient numbers.

https://forum.auto.ru/housing/2126241/

Mythbusters in season 10 (episode 157) disproved the myth that hanging a transparent bag of water repels flies. They conducted a test, it turned out that the package, on the contrary, lures!

https://www.forumhouse.ru/threads/5889/page-6

CD trap

Another option for a homemade trap is a device made from a regular CD and an adhesive base. For its manufacture you will need:

• CD;
• A small piece of rope;
• Honey or any other sticky and edible adhesive that can attract flies.

Actions:

1. Thread the rope through the hole in the CD and tie it into a loop. With this loop, you can hang the trap anywhere.
2. Apply honey or any other insect-attracting adhesive to the CD on both sides.
3. Put the CD in the freezer for 15 minutes.
4. After the sticky layer has frozen, hang the trap in places where flies accumulate.

Advice. If the room temperature is high enough that the sticky composition begins to melt strongly, put the CD back in the freezer.

How to make an electric fly trap

With certain technical skills, you can create more complex effective trap designs at home. With the help of such devices, it is possible to catch various flying insects both indoors and outdoors.

electric net

Electric landing net - homemade device, in which the light emanating from the light bulb acts as a bait, and the insect itself is drawn in due to the operation of the fan.
To create such a trap, you will need:

• a small electric motor with a power of 10–20 W (for example, from any class III electric player);
• light bulb with cartridge;
• two cans of different diameters;
• aluminum plate 20x100 mm;
• two thick plastic washers;
• epoxy adhesive;
• two strips of metal;
• screws;
• screws M4;
• round wooden base;
• a bag-trap made of a kapron stocking;
• rubber ring;
• power source, which can be a battery.

Diagram of the device of the electric net: 1 - rubber ring, 2 - electric motor, 3 - housing, 4 - fan, 5 - cover, 6 - suspension, 7 - bracket strip, 8 - M4 screw, 9 - washers, 10 - nylon bag

Actions:

1. Using a 20x100mm aluminum plate, cut out some fan blades. In the center of the plate, make a hole corresponding to the diameter of the motor shaft.
2. Then install an improvised propeller from two plastic washers on the shaft, while bending the fan blades at an angle of 45 degrees.
3. For reliability, it is recommended to fix the "hub" using epoxy glue.
4. Fix the lamp holder securely with screws on wooden base round shape.
5. Then connect it with a pair of metal strips-brackets to the motor starter. Please note that the length of the strips should allow a gap of 50 mm to form between the motor shaft and the lowest point of the light bulb.
6. We install the resulting structure in tin can, fixing it with M4 screws so that the fan itself is approximately 15 mm below the edge of the can.
7. The base of the lamp socket is covered with a lid made from the second can. In this case, a gap of 50 mm must remain between the edges of the main body of the device and the cover. Thanks to him, the insect will see the bright part of the structure, which acts as a light lure.
8. Using a nylon stocking, make a trap bag by putting it on the lower part of the body. A rubber ring can be used as a retainer.
9. Connect the light bulb and the motor to the power source by placing the device under the ceiling of the room.

Electric shock flytrap

To destroy flies indoors, you can also use a homemade electric shock flycatcher. To create such a device you will need:

• light bulb housekeeper;
• high voltage module;
• finger battery.

Actions:

1. Initially, you should disassemble the light bulb, which may not be working. We leave the glass part of the lamp and the plastic cap.
2. Drill two holes in the sides of the light bulb's plastic base, one opposite the other.
3. First, insert a soft aluminum wire and carefully wind it around the light bulb in one hole, and then in the second - the same wire in the same way.
4. One of the wires coming out of the neon bulb must be connected to one of the aluminum bars.
5. The remaining two free outputs must be connected to the high voltage module.
6. For ease of use of the device, it is desirable to connect the high-voltage module to the power source through a switch. To do this, in the plastic cap left after disassembling the light bulb, a rectangular hole should be made with a sharp clerical knife. Install a button in it, after which you can insert the high-voltage module into the cap, soldering all the necessary wiring.
7. Then you need to solder the battery to the high-voltage module, securely winding it with electrical tape.
8. To ensure a more reliable fixation, it is necessary to glue the high-voltage module to the plastic case using hot glue.
9. Then put a neon paw with a high-voltage winding on the high-voltage module in such a way that the two wires located in the product case and in the light bulb come into contact with each other.
10. To prevent dead insects from falling to the floor, you can attach a plastic cap to the top of the light bulb using hot glue.
11. When you turn on the device, the neon light will light up, attracting a flying insect. With a light touch, the fly will be struck by an electrical discharge.

Video: the process of creating an electric shock flytrap

With a minimum of effort and money, as it turns out, everyone can rid their home of annoying flies. Although the only disadvantage of such structures may be the lack of a guarantee of a 100% result, as well as unaesthetic appearance.

How to make an insect trap? This question is asked by all summer residents and residents of private houses. Wasps, flies, mosquitoes begin to besiege a person on hot summer days, especially in July and August. At this time, young offspring appear, which needs a lot of food. Therefore, males and females scurry about in search of food. They fly for food, especially for sweets and meat. Mosquitoes annoy with painful bites.

Many people are allergic to wasp stings. Therefore, people have to apply many methods of insect control. The bites of these insects are very unpleasant, especially for children. Sometimes you have to call ambulance to avoid suffocation due to an allergic reaction. Getting rid of wasps is the easiest. You can try to find the nest and destroy it. But wasps fly around the site. Mosquitoes can crawl into every crack in the house, as can flies. Therefore, you need to know how to make a trap at home.

Effective trap for wasps and flies

There is a very effective device that has been tested by many site owners. To make it, you need a 1.5 or 2 liter plastic bottle. The cover should be removed from it. The bottle must be cut into two components. The top part should be half the size of the bottom. Inside you will need to place a liquid bait. So that it does not spill, you need to place the upper part in the lower neck inside. On this trap can be considered ready.

Any sweet liquid can be used as bait. But it is best to take fermented compote, as it has a sharper smell. This completes the instruction on how to make a trap. Insects will fly to the smell and get inside, but they won’t be able to get out. Trying to crawl out along the walls of the bottle, a wasp or a fly gets into a dead end, which is formed due to the upper neck. It is better to make several such baits. They should also be reinforced in case of strong winds.

What bait is better to take

Flies are different, so certain baits should be used for them. Houseflies and similar species are most fond of sweets. Large species are practically not interested in sugar, so it is better for them to put fresh meat or fish in the bait. fruit flies may be interested only in fruit, juice or compote. Wasps are most fond of sugary sweets, such as honey. From mosquitoes, unfortunately, such traps will not help.

Such devices are very effective. But there is a certain type - fruit flies, which rarely fly inside the jar. The way to make a trap for them will be discussed a little lower. The funnel trap is not suitable for home use. It's all about bad smell, which begins to come from the bait after a few days. But if you change it more often, then the trap is quite suitable for the premises.

Do-it-yourself sticky fly tape

The most common way to get rid of flies is with Velcro tape. These are sold in every hardware store. Flies willingly sit on the tape, as glue is applied to it, which contains bait. An insect cannot fly away from such a device. The tape works for a while, but then the glue dries up. The advantages of such a device are many. It is affordable, harmless to humans. The tape does not smell, does not emit toxic substances.

How to make this type of fly trap? Many people think that this is impossible. But in fact, you can make a tape quickly. To do this, you need to take linseed or castor oil, resin or rosin. As a bait, you need to take glycerin, honey or sugar. Melt all the ingredients in a water bath and apply them on a paper tape. It will turn out an excellent analogue of a store device. Just such a tape is suitable for catching fruit flies, as they like to sit on the surface.

Now readers know how to make a trap for wasps and flies. Surely many are also interested in what goals the insect pursues. If bees live to make honey, then flies and wasps pursue completely different goals. They try to lay as many eggs as possible. One fly manages to reproduce up to 2000 larvae. And they live only a couple of months, and sometimes up to two weeks. For one laying, the fly lays about 120 eggs.

A cesspool, a compost heap, and even soil in a flower pot are most suitable for this. The fly will appear in a couple of weeks. Moreover, the warmer the ambient temperature, the faster the larva matures. Flies hibernate in winter. Active life begins only when the daily temperature in total is +20 degrees. There is one more interesting fact. Surely many are interested not only in how to make a trap at home, but also in why flies always sit on the windows. They just have compound eyes, because they simply do not notice transparent objects.

Why are flies dangerous?

Insects, in particular flies, are carriers of many diseases. Therefore, it is important to get rid of them in time. If wasps are dangerous due to bites, then flies can cause not only food poisoning, but also the most dangerous diseases. Here are some of them: typhus, fever, cholera, dysentery, brucellosis, etc.

An unusual but easy way to get rid of flies and wasps

Not everyone knows how to make a trap with their own hands using a fly agaric. Surely no one thought about the origin of the name of this fungus. It is necessary to collect fly agarics in August. A few hats will suffice. They should be crushed into disposable tableware and pour sweet water. A plate with mushrooms should be placed in the garden or in another place of mass accumulation of insects. Wasps and flies will immediately respond to the bait. You can not even crumble fly agarics, but simply sprinkle the hats with sugar. A syrup forms on the surface, to which insects will stick.

How to get rid of mosquitoes

To fight mosquitoes, you can make an ordinary trap-non-spill, but there is a more advanced tool. It is worth trying to make an electromechanical device. To create it, you will need a few improvised materials. The main component of the trap is a motor powered by electricity. Thanks to him, the trap has a suction effect. It draws mosquitoes inside a special container from which they cannot get out.

How to make a mosquito trap of this type? Everything is very simple. The power supply is based on direct current. A regular cooler can become a fan for the device, only, preferably, large sizes. For the basis of the case, you can take a plastic bucket from under the mayonnaise. In the bottom of the jar, you need to make a hole equal in diameter to the size of the cooler. Typically, the fan is sold complete with screws. They can screw the device to the bottom of the bucket. The cooler is attached outside, not inside.

bait for the trap

A suitable bait will be a light bulb with a bayonet base, as well as a cartridge for it. The surrounding air will heat up and at the same time illuminate the space. Everyone knows that light is the main bait for insects. LEDs can be used instead of light bulbs. Moreover, it is more economical to buy them in a tape, and not separately. In addition to light, you will need another bait. Mosquitoes will be interested in carbon dioxide, to obtain which you will need to dilute the same amount of sugar and 5 g of yeast in 0.5 cups of water. The bait should be added to the container, which must be attached to the body of the trap.

These are the lungs, but effective methods to control flying insects. They are much safer than aerosols and other chemical substances. Therefore, it is better to spend some time on independent production traps than to waste cash to other pest control methods.

Attracted by interesting smells, they fly into houses and apartments, verandas and sheds. Besides the fact that their presence in the room irritates residents, flies carry germs and dirt on their paws, which can cause food to spoil and poison people. A fly trap can solve the problem of annoying insects.

What attracts flies

Before you get rid of the flies, you need to understand what became the source of their attention. They may be attracted to smells:

• sweet jam, honey, syrup;
• ripe fruits and vegetables;
• meat and fish;
• food waste in the form of scraps and peel;
• vanilla, cinnamon, sweet flavors and additives;
• manure and sewerage;
• damaged products.

By getting rid of potential fly baits, you can avoid them in the house or significantly reduce their numbers. But in some situations, the invasion of flies may be due to the presence of a source of their attention in the neighborhood and it is impossible to influence it. Then it remains to trust the traps or special poisonous insect repellents.

On a note!

Insecticides are also based on natural substances and are safe for humans. The line contains poisons based on pyrethrum.

Unlike pesticides and synthetic insecticides based on Thiamethoxam (, Aktara), safe traps can be used in close proximity to people and animals without fear for their health. The basic principle of such a trap is to attract a fly to the bait and prevent it from leaving the trap. There are three types of traps:

1. Velcro - sheets of cardboard or tape coated with a sticky mixture that has a pleasant sweetish smell. Flies sit on such baits and stick. The advantages of sticky tape: easy to make and cheap to buy in the store, convenient to use anywhere, easy to clean and dispose of along with adhering insects. The disadvantages include the unpleasant appearance of hanging traps in the room, the risk of hitting the head with a sticky bait suspended from the ceiling.
2. Traps with bait are made from improvised means. Insects fly into a certain compartment with a bait, but cannot fly back. As bait, you can use jam, honey, sweet water, pieces of fruit or meat. The advantages of this method of catching flies are the ease of manufacture of the product and its effectiveness. The disadvantages of homemade include bad smell spoiled food that acts as a bait for flies, and the possibility of tipping over the container by curious pets or a child.
3. . Devices requiring Supplies in the form of an insecticide in a vial or from a special plate with a poisonous substance. Plus: work without misfires. Minus: depending on the composition of the insecticide, airing the room after use is sometimes required.
4. Electric fly traps are special devices powered by electricity. They attract insects with ultraviolet light and heat, but when flies come into contact with a certain surface, they are killed by an electric discharge. Such a blow is not capable of injuring a person, but for small flying insects it is fatal. Other electronic traps work differently - they suck in close-flying insects. The advantages of electric traps are stylish appearance, additional source light at night, high efficiency, safety for others. The disadvantages include the high price of electric fly exterminators, power consumption, bulky dimensions of the devices.
5. . When plugged in, they emit a sound that is inaudible to the human ear, which should keep the flies out of the way. Cons: does not always work; pets hearing ultrasound may be opposed.

Homemade traps

A person often uses his ingenuity to achieve certain goals. Was no exception and the fight against insects. Annoying flies can piss off even the calmest person. For the destruction of insects, especially enterprising people make homemade traps.

To make a homemade product, you need the usual plastic bottle volume of 1 or 1.5 liters, scissors or a knife, any sweet filling, scotch tape.

1. The upper part is cut off from the bottle at a distance of 7-8 cm from the edge of the neck.
2. A bait is placed at the bottom of the resulting container: jam, honey, syrup.
3. The cut off neck in the form of a funnel is thrust into the container with the neck down.
4. The wide edge of the funnel and the upper edge of the container are fixed with tape or tape.

On a note!

The narrow edge of the neck should not touch the sweet filling. Flies should not get the sweetness without flying inside the bottle.

Such a fly trap from a plastic bottle can also catch other sweet-toothed insects: wasps, bees, midges. simple and affordable way making a trap allows you to throw it away with a large accumulation of insects inside and make a new one.

Flycatcher from a glass

You can make a fly trap from an ordinary glass or plastic cup and transparent food film. At the bottom of the glass put a teaspoon of honey or jam. cling film it is necessary to cover the cup and pull it tightly, fixing the edges of the film with adhesive tape. Make 2-3 holes in the film so that the insect can get inside the glass. You can make several such homemade products and arrange them throughout the house.

Trap from a glass jar

In places of accumulation of large flies, a more serious bait is needed - spoiled meat or fruit. They have a pungent strong odor and will attract more flying gnats.

1. A liter glass jar with a wide neck is taken as a container.
2. A few pieces of bait are placed inside.
3. A wide funnel is installed on top with a narrow neck down.
4. The edges of the container and the wide edges of the funnel are fastened together with electrical tape or wide mounting tape for structural reliability.

On a note!

The strong smell of rotten vegetables, fruits or meat will be very unpleasant for households and interesting for cats and dogs. Therefore, such a flycatcher is recommended to be used to catch flies on open verandas and placed in places inaccessible to animals.

Instead of a glass container, you can use a container made of thick plastic with a wide mouth. The main condition for a reliable flycatcher is the absence of gaps between the funnel and the jar. Otherwise, flies can get out. Such traps are well suited for if placed around the perimeter of the site.

Duct tape

One of the most popular fly traps is sticky tape. It is sold in any hardware store and costs from 20 to 50 rubles apiece. But if it is not possible to purchase goods in the store, you can at home. To do this, mix 1 tablespoon of rosin with a tablespoon of castor or linseed oil. Heat the resulting mixture in a water bath and stir for 5 minutes. Then add jam and chill. Apply the sticky mass on long strips of thick paper and hang it in places where flies are often found.

If the recipe is followed, homemade glue remains sticky for a long time and is able to reliably hold insects attracted by the smell of jam.

For people who do not have time to make homemade products, but want to quickly and effectively get rid of the flying midges, there are electric fly traps. These devices are made of a metal case with a fire-resistant plastic coating, have several UV lamps, the bright light of which attracts insects. On the way to the lamps, the flies fall on the grid through which the current passes, and immediately die. The conductive element is protected by an additional coarse mesh to prevent accidental contact by a person or pet. Such devices also help to get rid of mosquitoes, midges.

pest killer

Electric device for killing flying insects. Two 20W ultraviolet lamps act as bait. Passes near the lamps metal grid, conducting current. The electric trap is designed for flies and mosquitoes. For the correct functioning of the device, it is necessary:

• set the trap on a flat surface;
• connect to AC power;
• make sure that moisture does not get on the device;
• periodically clean the dead insect tray.

The price of the device is about 3500 rubles. The device is durable and correct use will last for several years. The range of the electric trap is up to 120 m 2 . Power consumption 15 W. dimensions: 51x31.5x10.5 cm; weight 2.3 kg.

Well

Electric traps of industrial importance are widely used in shops, warehouses, markets against flies, mosquitoes and other insects. The device is mounted on the wall at a height of 2 meters above the floor. The composition of the product includes ultraviolet lamps, the light of which attracts insects to itself. Flying close to the lamp, they fall on the conductive grid and die.

Main settings electric trap Well:

• coverage up to 50 sq. m.;
• weight 3.3 kg;
• dimensions: 34x28x13;
• lamp power 8 W;
• body material - plastic;
• power consumption - 25 W;
• price 6800 rubles.

Noticing the flies, you should not immediately try to destroy them, it is better to follow the insects to find a problematic place in the house. Midges love wet, dirty places, and you need to carefully inspect possible problem areas in your home:

1. In the kitchen, it is worth examining the cabinets with stocks of cereals, home-made preparations, perhaps something has deteriorated, and it was there that fruit flies started up. Forgotten food waste, rotten fruits or vegetables attract midges, and they multiply rapidly.
2. Pay attention to plumbing, sewer drains, ventilation holes.
3. In living rooms, flies most often choose to live in aquariums with stagnant water, cages that contain pets.
4. Ground flies infect indoor flowers, you just have to overdo it with watering. Rotten particles form in the soil, and midges instantly settle here, affecting the roots of the plant.

Before taking drastic measures to combat domestic insects, it is necessary to clean the house to prevent further reproduction of midges. It is necessary to remove all perishable products in the refrigerator, check the cabinets, wash the shelves with soapy water, treat water and sewer drains with special means.

You should especially take care of pets, an aquarium with fish, and also check indoor flowers.

Advice: having found earth midges, the plants are carefully examined, the damaged and rotted parts are cut off and the flower is transplanted into fresh soil.

The trap for midges will get rid of insects in the house

The prospect of using insecticides to kill insects in the home appeals to few. Although these drugs are of low toxicity, if there are small children, animals suffering from allergic diseases in the house, then it is better to refuse their use. It is worth trying safe methods, and the midge trap works quite effectively.

Advice: you can buy purchased traps, for example, "Raptor" with a bait liquid that attracts insects, they fall on an area covered with a sticky substance, where they die.

Often there is no way to purchase a ready-made device, then it is better to make a do-it-yourself trap for midges, which will help get rid of uninvited guests. To make it, you can use available home remedies.

We offer five ways to make simple fixtures yourself: