Chipboard sawing - manufacturing of parts according to the customer's dimensions. Chipboard sawing - manufacturing of parts according to the customer's size Where to order chipboard cutting
We cut laminated chipboard into parts according to the customer's size. Large selection of decors available laminated chipboard EGGER and Kronospan.
Attention!
Egger has announced the release of most of the laminated chipboard decors in 2020! Order any decors now, don't delay for tomorrow!
Price of Egger chipboard part with cut to size
| Chipboard Egger 8 mm | from 740 rub. / sq. m |
| Chipboard Egger 10 mm | from 740 rub. / sq. m |
| Chipboard Egger 16 mm | from 740 rub. / sq. m |
| Chipboard Egger 25 mm | from 1050 rub. / sq. m |
| Colors and prices EGGER laminated chipboard |
Price of a Kronospan chipboard part with a cut to size
Radius cut
Nesting is not only a radius cut of curved parts on milling machine with CNC, but also the manufacture of parts from chipboard and MDF with holes for assembly in one go, i.e. without moving from machine to machine.
The main advantages of manufacturing curved parts and parts with additives using NESTING technology:
- Possibility of saving sheets of chipboard due to a denser arrangement of curved parts on a sheet of chipboard
- High productivity - cutting speed up to 20 meters per minute.
- A fundamentally higher manufacturing accuracy compared to traditional technologies.
- The ability to manufacture high quality internal cutouts.
- Finish cuts on both the front and back of the workpiece for improved edge quality.
- Ability to work with vector files created in the programs Basis Furniture, Corel Draw and their analogues.
The above advantages allow you to save both on material and on the cost of work on curved sawing and additives, which is fully tangible on large orders.
The cost of cutting services on a CNC milling machine for laminated chipboard and MDF with a thickness of 8-19 mm is 30 rubles per 1 lm.
Radial cutting of a part from chipboard
Chipboard edge processing
Application of 0.45 mm PVC edges to laminated chipboard parts
Applying 2 mm PVC edges to laminated chipboard parts
Hardboard (fiberboard)
Sawing out hardboard and holes for fiberboard
MDF
Cutting MDF Kronostar by size
Furniture additive
Drilling holes in chipboard for fittings
| Hole for furniture hinges, Ø35 mm | 55 RUB / PC. |
| Hole for shelf holders, Ø5 mm | RUB 25 / PC. |
| Through hole for confirmation, Ø8 mm | RUB 25 / PC. |
| End hole for confirmation, Ø5 mm | RUB 25 / PC. |
 You can get the parts faster by filling out and paying urgent cut. DSP Komplekt reserves the right to refuse to provide services without giving reasons. Payment for servicesYou can pay for cutting services:
|
We carry out:
- Cutting chipboard
- Cut MDF
- Plywood cut
- Sawing of fiberboard panels
- Cut HDF
- Sawing panels finished with plastic
- Sawing veneer panels
- Sawing plastic
- Plexiglas cut
- Sawing of facade panels
- Saw tabletops
- Panel sawing postforming
- Manufacturing of multi-blade parts from chipboard and MDF.
All of the above materials are guaranteed to be sawn without chips or breakdowns. When sawing, an automatic cutting center Holzma (Germany) and a panel-sawing machine Feeder Capa 450 (Austria) are used. When ordering, a cutting plan is drawn up for the best distribution of parts on the sheet, in order to obtain a minimum percentage of losses. To speed up the cutting process, there is the possibility of batch cutting. We cut parts both from our own material and from the material of the customer. Always in stock 12 colors of high quality laminated chipboard: White Vanilla Gray Metallic Black Wenge Walnut Eco Alder Plank Cherry Portofino Cherry Beech Oak Bleached Po individual orders we make multi-saw parts, panels with a groove.
- The term for making an order is 5-7 working days.
- An urgent order is made in 3-4 working days.
* We carry out free storage of the manufactured order for no more than 3 calendar days. In case of late pick-up of the order, storage is paid separately at the rate of 1 pallet - 100 rubles per day.
** Finished orders are stored on a Euro pallet. When loading an order together with a Euro pallet, the customer gives the collateral value of the pallet at the rate of 250 rubles.
*** Order packing is paid separately, according to the prices given in the table. The order is loaded into the body of the customer's car using a loader.
Open chipboard in Moscow Is one of the main directions of our company. In addition, in the RASPILPODOLSK company you can order sawing of MDF, plywood, fiberboard, HDF, plastic, plexiglass, table tops, postforming panels.Advantages of ordering sawn chipboard in the company "RASPILPODOLSK"
High-quality sawn chipboard... We use the German cutting center Holzma and the Austrian cutting machine Feeder Capa 450. The high-quality equipment, which has long proven itself on the market, allows us to guarantee that the cut will be carried out without chips or cracks, with the highest possible accuracy (0.3 mm). Loading of panels is done automatically, which eliminates the human factor and, therefore, reduces the probability of rejects to zero;Sale of laminated chipboard with sawing in Moscow... We offer cutting of customer's materials and our own. We always have 12 colors of laminated chipboard from the SWISS KRONO company in stock. We work with this manufacturer, because we were convinced from experience what exactly he offers best material... For the manufacture of chipboard, he uses only the best raw materials, which are absolutely safe for humans. When cutting chipboard from "SWISS KRONO" there are no difficulties, the edges are smooth and neat;
Cutting chipboard into complex shapes... The Feeder Capa 450 cutting machine makes it possible to cut not only standard square and rectangular shapes from chipboard, but also a triangle, hexagon, trapezoid, etc.;
Urgent cutting of laminated chipboard... The machines allow for batch cutting, which significantly speeds up the work. If you need urgent cutting of laminated chipboard in Moscow, please contact us! The standard lead time is 5-7 working days, and urgent - 3-4 days;
Rational consumption of material... Before cutting, a cutting map is drawn up, where the placement of parts on the sheet is optimized, due to which the amount of waste is minimized, or there is no waste at all;
Cutting chipboard at a low price, which allows you to reduce your costs for preparing material for further processing. Savings on this service allow furniture manufacturers to reduce their costs and increase profits.
Cutting laminated chipboard according to the customer's size (Moscow and Moscow region)
Cutting chipboard is an important stage in the production of furniture. This process cannot be called simple, high-quality equipment is required to use it, manual cutting will lead to cracks and chips.Are you looking for where to cut laminated chipboard to your own size? Please contact our company "RASPILPODOLSK".
Also in our company you can buy laminated chipboard with a saw cut in Moscow. Ready-made high-quality elements are perfect for making furniture. With smooth parts without chips, furniture will be of higher quality and with high aesthetic properties.
We have our own production and are engaged in wholesales, so our price is an important advantage. Cutting laminated chipboard is cheap, but at the same time of high quality - this is what we offer to our clients. If you are looking for a company that will cut laminated chipboard according to the customer's size (Moscow) or sell high-quality ready-made elements from laminated chipboard, then contact RASPILPODOLSK!
An important procedure is the cutting of chipboard, during which work is carried out with two materials - chipboard and laminated coating. You should choose the tools that are suitable for them and will not leave any chips or cracks. The procedure is quite laborious, being much simpler with other materials - chipboard, MDF and others. That is why it is undesirable to perform it at home - unforeseen costs may follow for the purchase of new materials.
Prices for cutting laminated chipboard
| Straight cut part | |
|---|---|
|
Chipboard; MDF; Chipboard; LMDF up to 16 mm |
35 rubles / r.m. |
|
Chipboard; MDF; Chipboard; LMDF from 18 mm |
40 rubles / r.m. |
|
PLYWOOD up to 17 mm |
50 rubles / r.m. |
|
PLYWOOD over 17 mm |
60 rubles / r.m. |
|
Fibreboard, HDF 2.75x1.22 |
130 rub. / Sheet |
|
Fibreboard, HDF more than 2.75x1.22 |
200 rubles / sheet |
| Manufacturing complex parts | |
| 70 rubles / piece | |
| Bevels at an angle to the side or not perpendicular to the plane of the sheet | 70 rubles / piece |
|
Straight cut cuts with access to different sides |
200 RUR |
|
Straight cut cuts with an exit to one side |
300 RUR |
| Curved parts (radius) | |
| Edging straight parts with an edge (without edge cost) | |
| Edging curved parts (without edge cost) | |
| Groove sampling | |
| 40/80 rub. | |
| Hole drilling (additive) | |
|
Diameter from 10 mm to 16 mm (eccentric hole) |
30 rubles / piece |
| Packaging | |
| 30 rubles / m2 | |
| Other services | |
| Countertops | |
| Difficult sawing - the cost is calculated in accordance with the task and template | |
We offer for your attention the application form for sawing (37,00kb)
Cutting laminated chipboard according to the size of the customer wholesale and retail
Home work consists of two stages: first, the laminate is cut, and then all the material. Due to the availability of special equipment, we perform them in one stage, which significantly saves time and effort.
You can order our services on the website or by phone. We will cut the chipboard quickly, providing you with carefully processed materials that will be used in the production of durable and beautiful-looking furniture.
If necessary, we will quickly answer all your questions regarding the services and all aspects of their provision. Contact details are presented to your attention on the site.
Advantages of sawing laminated chipboard at KSPROF
There are many specialized companies in Moscow that provide processing services for materials used in furniture production. One of these is the firm "KSPROF", in which you can order sawn chipboard. In this case, we have significant advantages, including:
- significant experience;
- adequate pricing policy;
- performance of work with high quality results;
- experienced, responsible and accurate specialists;
- prompt implementation of processes;
- taking into account all the features and aspects of services;
- convenient ways payment.
Work examples
So, I collected a sufficient amount of material and decided to roll out another analytical note. This time the topic is sawing chipboard without chips.
There is a fairly fair opinion that it is possible to cleanly saw chipboard only on professional equipment (that is, a panel saw).
The whole highlight of this machine is that it has two saw bladelocated strictly on one axis. The first cuts the chipboard, the second cuts it through and through.
The cost of this unit is about 700,000 - 1,000,000 rubles (of course, there are more expensive ones))). FOR THE AMATEUR IS NOT VERY ACCEPTABLE.
Not a bad way to trim misaligned parts, but you can't cut an entire cabinet that way. Chips, of course, are present, but in an amount that is quite comparable with the formatter (he, too, secretly, leaves a small number of small chips). Lots of hassle with markup. Only straight cuts can be made.
Method 5 - Fraser
Provides the cleanest edge of the workpiece, the quality is no different from the format tool, often even better.
With it, we first saw the workpiece with a jigsaw, retreating from the marking line 2-3 mm, and then we align the line according to the template (I usually use the second piece of chipboard, sawn on a formatter, suitable size). must be copier, that is, with a bearing.
Very clean cut. The ability to carry out curvilinear cuts, that is, the manufacture of many, including several, exactly the same. Cons - a lot of trouble: the need for accurate marking, preliminary filing of workpieces, placing a template or tire under the router, that is, it is not very suitable for mass use.
When ordering a cut from 10 sheets, we give a 3% discount on the material
Sawing and cutting of chipboard and chipboard
Chipboards - conventional and laminated - are widely used in construction and interior decoration, furniture and other products. Parts and workpieces made of chipboard and laminated chipboard are in demand not only in mass production, quite often they are used for self-made furniture and interior elements. This saves money and allows you to make products to your taste.
Before you start making furniture, you need to cut the material. With a small amount of work, this does not take much time and effort and can be done at home. But to cut a large number of slabs will take a lot of work. In addition, self-sawing chipboard can spoil the material - violation of the chipboard cutting technology and the use of a non-professional tool leads to chips, cracks and scoring of the laminated coating.
The best option is to order cutting of laminated chipboard in a specialized company equipped with professional equipment. In this case, you will receive parts of precisely defined shapes and sizes with clear and even edges.
Sawing chipboard at All-fanera
All-fanera is ready to perform chipboard sawing work using its own boards or customer materials. Our range of services includes:
- according to the size of the customer;
- hole additive;
- applying PVC edges;
- production of workpieces with internal and external bending with a radius of up to 60 centimeters;
- execution of beveled parts;
- cutting and cutting slabs at an angle in thickness from 0 to 45 °.
Thanks to the use of modern machines, we can produce:
- blanks for cabinet furniture;
- details for the kitchen interior;
- blanks for other furnishings.
Our equipment allows you to make products with flawlessly smooth and clear edges. In our work, we use only high-quality and sharp saws, so that the edge of the finished products does not crumble, and no scuffs appear on the laminated layer.
When processing board materials it is important to respect the exact dimensions of the parts specified by the customer. For this, the sheets are cut according to pre-prepared computer templates. This approach allows:
- correctly arrange the details on the chipboard sheet;
- get blanks with the most accurate dimensions and angles;
- minimize material waste;
- reduce the time of work.
All-fanera advantages
Since 1994 All-fanera has been cutting laminated chipboard in Moscow. During this time, our specialists have gained extensive experience in sawing operations, which allows us to cope with orders of the highest complexity. Our clients receive:
- profitable
- work using computer maps and secondary control of technical specifications;
- high-quality processing of materials - finished parts have a smooth, non-crumbling edge without chips and scoring;
- packaging of finished products (optional);
- prompt shipment of parts and blanks.
How to order cutting of laminated chipboard in Moscow at All-fanera
To place an order, you must fill out a form specifying the thickness and color of the material. To clarify the information, please call +7 (495) 626–95–51, +7 (495) 626–99–95, +7 (903) 589–02–89 or contact the order office located at: Moscow, Leningradskoe Highway, 63 (m. Rechnoy Vokzal or m. Belomorskaya).
