How to wash the foam ceiling. How and how to wash the foam ceiling tiles in the kitchen? Folk remedies for washing the ceiling in the kitchen

The building products market today offers a huge selection of ceilings. One of these options is ceiling tiles, which are the most popular lately due to their cost-effectiveness and quick installation.

With its help, you can give the desired look to your office, apartment or house. But what to do when a seemingly whole and solid tile is covered with a layer of dust or stains?

Due to the fact that there are several types of tiles, each of them requires a certain type of care.

Types of tiles and care products

Ceiling tiles appeared relatively recently, but have already managed to earn the gratitude of buyers. For its manufacture, a variety of materials are used, which largely determine chemical composition the means used. You can hit the specifics by studying all these features, or use neutral compositions, which we will recommend in the course of the article.

But, in addition to beauty, you should consider what for different types Ceiling tiles need their own special kind of care. And before you buy the one you like, think about whether you can properly care for it.

• . For this, a regular sponge is used, warm water and soap. Please note that the planks cannot be filled with water.

• Not laminated. Many models can be attributed here, but first of all, these are options made of polystyrene foam and polystyrene foam. A dry cloth or a vacuum cleaner with a soft nozzle will suffice. In case of small stains, take a regular eraser and carefully wipe the stained areas.

• Mirror (glass). Mainly used in bathrooms and bedroom. In the first case, it is quite often exposed to moisture, therefore, it is advisable to wipe it more often with a dry cloth, and then soaked in special products for caring for mirrors. In the bedroom, tiles do not get dirty so quickly, so it will be enough to wipe at least once a week with special products for mirrors. Approximately also it is necessary to look after the mirror.

• Wooden. The surface of the wood treated with impregnation and varnish is not afraid of moisture, but it should still be avoided from getting between the seams and into the cracks. For intermediate cleaning, we use a dry, soft, lint-free cloth, and for major cleaning, a well-wrung sponge and soapy water.

• Ceiling gypsum fiber panels for ceilings "Armstrong" also, in fact, are tiles. Washing is not recommended. Dry cleaning only. With heavy pollution individual elements ceilings can be simply replaced with new ones.

Advice. Get a hood - it will allow you to keep the fresh look of your ceiling in the kitchen longer. If the tile turns yellow, just paint it white water-based paint. For painting, use a foam roller - so the paint will lie in a more even layer.

In which case, what means are used?

The choice of ceiling care product depends not only on its type, but also on what type of pollution has appeared:

• Vacuum cleaner. A huge plus when cleaning with a vacuum cleaner is the lightness in physical terms.

In addition, the vacuum cleaner saves you a lot of time and leaves no dirty marks behind. If your neighbors don't fill you up, you don't have rusty spots on a snow-white surface of the ceiling, then a vacuum cleaner is the best solution. Once a month it will be enough to walk with a soft brush over the surface, and you will forget about “wet” cleaning forever.

• Brush. Great for embossed tiles, as dust traps in the recesses, and only the bristle of the brush can cope with this problem. Of course, during cleaning with a brush, all the dust that has accumulated on the ceiling will fall on the floor and furniture, but there is nowhere to go.

• Mop. It is applied to a capital sink, surfaces, steady against moisture. As in other cases, rags and sponges are well wrung out.

• Detergents. This method is used if you do not know how to wash ceiling tiles. As a rule, use the usual detergents that you use in everyday life. The emphasis should be on liquid detergents, as powder ones contain abrasive particles - they can damage the surface.

How to wash with liquid detergents?

There is nothing difficult in this procedure, the main thing is to follow the procedure:

• We take a soft cloth or sponge;
• We dilute the soap solution with detergent;
• We wring out the moistened rag thoroughly and wash off the dirt with light movements;
• Be careful not to leave moisture on the tile - dry. She will leave dirty footprints;
• Remove excess moisture with tissues or regular toilet paper.

Advice. Do not use chemical solvents - tiles are made of plastic materials that can be damaged by such products.

During renovation

If you are planning a repair, then you may have a situation where you will not know how to wash it, as traces of putty or glue will remain on it. In this case, regular cleaning will not help - you have to take up the spatula. But be extremely careful not to damage the surface of the material.

Which is better - dry cleaning or wet

Before cleaning the ceiling tiles, make sure that there is no other way to do it. Wet cleaning is the last resort and there are several reasons for this: the material, having saturated with moisture, can change color; residual marks and stains are possible.

To maintain order, it is enough to vacuum the ceiling once a month or walk on it with a brush, and you can keep the surface in its original form much longer. When washing, you put pressure on the surface, creating mechanical damage.

Even if the ceiling material is not afraid of direct exposure to water, it is necessary to observe the measure in everything.

Such a tile is only for replacement, it will not be possible to clean it.

In cases where aggressive stains (coffee, ketchup, rusty stains, etc.) get on the surface, try soaking them with whiteness. Then white surfaces can be whitewashed with water-based paint.

Conclusion

The weekly removal of dust from recesses and bumps (if the tiles are embossed) simplifies cleaning - this makes your work easier. If you have not washed the surface for a long time, you will have to use liquid detergents or special alcohol-based ones, in case you have mirror tiles on the ceiling.

Experts advise cleaning the tiles from dust and other contaminants once a week, since this time period is considered optimal for removal - you can easily remove it with a regular brush or vacuum cleaner without using "heavy artillery" in the form of a rag and sponge.

Such cleaning can be carried out every few months, but be careful not to press hard on the surface so as not to damage it. And carefully remove excess moisture so that there are no streaks or dirty spots. These are the main recommendations on how to clean ceiling tiles from small dirt and difficult stains. Keep your home clean so that it keeps the comfort and health of its inhabitants.

Suspended ceiling structures have many advantages - they hide the disadvantages of the base surface, engineering Communication, quickly mounted and suitable for installation of any lighting fixtures. But sooner or later, the owners of such ceiling structures have the question of how to wash the false ceiling. Depending on the ceiling tiles used, different ways surface cleaning and detergents. 1

Some products cannot be washed at all, so other methods are used for cleaning. We will tell you how to clean foam ceiling tiles, and how to clean Armstrong false ceilings.

Cleaning products for washable false ceiling tiles

Before washing ceiling tiles, stock up necessary tools and fixtures.

For work you will need:

• bucket with water;
• stepladder or scaffolding (the latter device is more convenient, because you can put a bucket of water and detergents on it, which will save you from having to constantly go down and up to the elevation);
• latex gloves;
• protective glasses;
• rags and kitchen sponges;
• detergents;
• long-handled brush or mop.

If stains and stains appear on the surface of the ceiling, the question arises of how to wash the foam ceiling tiles. Do not use harsh abrasives and hard brushes to clean foam tiles, as the surface can be damaged.

It is best to use liquid laundry gels or dish detergents for these purposes. They dissolve grease and other contaminants well and do not damage the surface of the tile. If desired, the ceiling covering can be washed with hair shampoo.

Important! It is forbidden to use products containing solvents to clean the tiles, because they react with the foam and destroy it.

Stamped ceiling tiles are looser, so they cannot be wetted much, which means that the sponge or rag needs to be squeezed well. Injection and extruded tiles are resistant to moisture, so they are not so whimsical in the choice of detergents.

If you do not know how and how to wash a false ceiling, start with a soapy solution. To do this, dissolve grated laundry soap in water. It is better to clean loose products with soapy foam, and not with a solution, so the material does not absorb water much.

In doing so, adhere to the following sequence of work:

1. With a rag or sponge, gently apply soap suds to the coating and lightly wipe the places with dirt. In this case, it is not necessary to exert a strong mechanical impact and actively rub the product.
2. After that, the ceiling is gently wiped with a dry rag to remove the remnants of soap solution and water.
3. If drops of water or foam are visible on the coating, then the plates are wiped with paper towels or toilet paper to collect the last moisture. Otherwise, after drying, visible stains may remain.

Advice! If you cannot restore the tiles to their original beauty, whiteness of the surface or get rid of stubborn dirt, just paint the ceiling with interior paint in two layers, since many types of ceiling tiles can be painted and repainted several times.

How to Clean Non-Washable False Ceiling Tiles

The question of how to wash suspended ceilings disappears by itself if non-washable ceiling tiles are used. In such a situation, only dry methods of cleaning the surface are used. The easiest way to do dry cleaning is with a vacuum cleaner. To do this, set the unit to minimum power and put on a soft nozzle for cleaning furniture. Don't rub the tile too hard, just vacuum over the surface to pick up the dust.

For dry cleaning, a special Duster brush is also suitable. It is suitable for cleaning embossed tiles, because the long soft bristles of the product easily penetrate into all recesses and hard-to-reach places. The principle of operation of the brush is based on the fact that negatively charged bristles attract dust from the surface and prevent it from flying in the air and settling on other planes.

Advice! Manufacturers of some ceiling tiles for suspended structures recommend using a regular eraser to clean their products. A clerical eraser will cope even with stubborn dirt.

False ceiling cleaning step by step

We told you how to wash ceiling tiles, but some types of dirt are very difficult to remove from both washable and non-washable products. This is a tile adhesive that gets on the surface during the gluing of the coating. Fresh glue is recommended to be washed quickly with a dry cloth without the use of water and any detergents.

If you have not had time to wipe off the glue, and it has dried up, then getting rid of it is more difficult. To clean it, use a spatula, which is operated very carefully so as not to damage the ceiling covering.

Only microfiber cloths, suede cloths or special cleaning wipes may be used to clean glossy finishes. After that, to give the surface its original shine, it is rubbed with a cloth soaked in ammonia. Then the plate is polished with a dry rag.

Ready-made products for cleaning foam tiles

Washable suspended ceilings can be cleaned with ready-made detergents. In addition to the listed compositions (washing gel, shampoo, detergent for dishes), you you can use the following:

• Special ceiling cleaners are more expensive than conventional improvised products, but they protect the surface from damage and remove various contaminants well.
• Liquid detergent sprays containing ammonia for washing glasses, mirrors and plastic products are also suitable for these purposes.
• On sale you can find special sponges for removing greasy deposits and soot on the kitchen ceiling. They are impregnated with a special composition, which greatly facilitates the work of cleaning the ceiling surface.

Advice! Before using any detergent, test it on an inconspicuous area, such as in a corner or behind a cabinet.

Cleaning tiles with improvised means

To remove stubborn dirt from foam tiles and suspended ceilings at home, you can prepare the following products:

1. The fastest way to make soap suds is to dissolve in water not grated soap, but dishwashing detergent.
2. The following cleaning solution will also help - dissolve a tablespoon in three liters of water regular salt. Soak a kitchen sponge in this solution and wring it out well. After that, rub the surface of the tile. The solution helps to get rid of the yellowness of the surface.
3. To return the snow-white appearance of white foam tiles, you can prepare a solution from a mixture of water and bleach. However, please note that this tool is only allowed to be used on white products.
4. To remove old dirt, you can use alcohol, but first check its effect on an inconspicuous area of ​​\u200b\u200bthe ceiling.

Safety precautions when working with detergents

Now you know how to wash ceiling tiles. Care must be taken when using water and detergents, because it is easy to slip and fall on a wet floor. You should be especially careful when working on a ladder or scaffold. A slippery foothold can cause a fall from a height and serious bruising.

To prevent this from happening, cover the floor, scaffold or stepladder with old towels or sheets folded in several layers. The fabric will quickly absorb moisture and will not allow you to slip.

Important! Also, during operation, protect your eyes and hands. Some detergents, if they get into the eyes, can cause severe burning and damage to the mucous membrane. That is why it is recommended to use safety glasses. Rubber gloves should be worn to protect hands, because caustic compounds can cause skin irritation or severely dry the skin.

So that you don’t have to constantly climb up and down ladders or scaffolds in search of a sponge, rags or a jar of detergent, put on an apron with large pockets in which you can place all the necessary materials at hand. In addition, the apron will additionally protect your clothes from dirt.

Ceiling tiles are made from different materials, but in any case, it is an adornment of every home. In addition, its functions include not only improving the aesthetic appearance of the room, but also insulating the ceiling, hiding irregularities, and soundproofing.

In order for it to retain its appearance longer, every housewife should know how and with what to wash the ceiling tiles.

Depending on the material used, tiles are of the following types:

1. Styrofoam- it is made of expanded polystyrene. This type is the most common in view of its democratic wall and a wide variety of patterns.
2. metal- different types of light metals are used for manufacturing. Due to its high price, metal tiles are less in demand.
3. Wooden- made from various types of wood.

According to the method of manufacture, they distinguish:

• pressed or stamped ceiling tiles;
• injection ceiling tiles;
• extruded or extruded ceiling tiles.

Let's consider each type in more detail.

Pressed ceiling tiles

In the production of stamped tiles, foam blocks are used, which are pressed. As a result of stamping, the thickness of such a product is obtained 6 to 8 millimeters.

The appearance of stamped tiles impresses with its beauty and variety. However, it must be taken into account that the quality of the products remains at a rather low level and, as a result, the price range is also appropriate.

Due to its fragility consumption of pressed tiles is higher than other species, and in the case of cutting, it is almost impossible to achieve smooth edges. It is recommended to purchase it with a margin.

Upon closer examination, one can see that the product is rather loose, hygroscopic- therefore, it will be good to absorb any pollution. Before you buy it, you must first study the information on how to wash foam ceiling tiles, since very gentle care will be needed here. Sometimes sellers in hardware stores may advise you to paint such a ceiling with water-based paint.

Important! Before proceeding with gluing the pressed tiles, it is recommended to dry them additionally in a warm, dry room. Otherwise, unnecessary gaps may form after it is glued to the ceiling.

Injection ceiling tile

Also made from expanded polystyrene, only in this case material is subjected to high temperature treatment. As a result of such sintering, a tile with a thickness of up to 14 millimeters. Its pattern is deep and clear, and the edges are absolutely even. Thanks to this, the ceiling looks like a single whole, without seams.

Injection ceiling tiles have a number of positive properties. It has good sound insulation; is moisture and heat resistant; has good strength. It is produced exclusively in white, which allows painting in any color.

Often, injection tiles are used to decorate not only the ceiling, but also the walls. It looks quite creative, because in its manufacture they can use a film with imitation of marble, wood and other textures.

The only drawback in this case is the price of a tile is 3-4 times higher than that of a stamped one. But the declared price still corresponds to the quality.

Important! From hitting straight sun rays injection ceiling tiles turn yellow over time.

Extruded (extrusive) ceiling tiles

Is obtained as a result pressing extruded polystyrene strip. This tile has a thickness of only 2-3 mm, but at the same time it is the most durable and reliable.

By its structure, extrusion ceiling tiles distinguished by the absence of granularity- it is smooth and, most often, covered with a laminating film and a water-repellent solution. Is ideal option for kitchen.

The shape of the tile is slightly convex-concave, which perfectly hides small irregularities in the ceiling without additional preparation. The edges are perfectly cut, allowing you to create a "seamless" effect. Easily recovers its original shape after deformation.

Available in a large number of colors, with and without patterns. Additional painting is not recommended. In care is not demanding. The price is quite high, but corresponds to the quality.

Reference. Despite the fact that the composition listed species ceiling tiles include styrene - far from an environmentally friendly material, it begins to release its toxic substances only when high temperatures namely, in case of fire.

Causes of dirty ceiling tiles

There can be many reasons for ceiling pollution. First of all, before gluing the ceiling tiles, you need to carefully inspect the ceiling for the presence of microcracks and cover them up if found. The fact is that moisture can collect through such cracks, which will negatively affect the foam ceiling tiles. It will also be useful to inspect the roof - perhaps the roof is leaking.

Another source of contamination may be high humidity in the house. This largely depends on the location of the house and its age. Usually in such cases, stains can appear on the ceiling, as well as fungus and mold. It is recommended to make good ventilation and regularly ventilate the premises.

In the summer, insects, especially flies, leave traces of their vital activity on the ceiling tiles. There is only one solution here - mosquito nets on windows and front doors.

Dust, tobacco smoke, grease stains- all this easily becomes the cause of stains on the ceiling, especially in the kitchen. Separately, it should be said about tile adhesive, which can leave its marks on the tile from inaccurate gluing.

In any case, the ceiling itself will not be cleaned. Therefore, you should not delay the time, but immediately eliminate the pollution until they become persistent and difficult to remove. How to wash foam ceiling tiles can be found below.

How and how to wash the foam ceiling

If you understand the intricacies of caring for ceiling tiles, washing it is not difficult. Before washing the foam ceiling, each housewife should prepare the following improvised means:

• bucket;
• latex gloves;
• rags or sponges;
• protective glasses;
• stepladder;
• detergents;
• mop or brush with a long handle.

Cleaning must be done carefully, slowly, without applying significant mechanical effort So, how to wash the foam ceiling tiles from various types of contaminants?

General principles for cleaning a foam ceiling

Vacuum cleaner - the first assistant

The simplest way is dry cleaning, which will not take much of the hostess's time. Provided that there are no streaks and stains on the ceiling, it is enough to vacuum it once a month. For this, a special nozzle for furniture is used.

When using the vacuum cleaner for the first time, the power is first set to minimum level. If the dust is not well absorbed, and the tile does not lag behind the ceiling, you can try to increase it until the optimal mode is selected. In the future, the ceiling should be vacuumed in this mode.

Dust brush – Duster

There is another way to clean foam ceiling tiles. If the tile is sufficiently embossed, in this case it will help special soft brush for dry cleaning: it will well sweep dust from recesses and hard-to-reach recesses.

The principle of operation of this brush is such that with its huge number of hairs that have a negative static charge, it attracts positively charged dust. In this case, the dust does not disperse in the air, but remains on the brush. That is why many housewives prefer the duster brush instead of a vacuum cleaner.

Wet cleaning

There may always come a time when a vacuum cleaner and a brush will be powerless before removing stains. In this case, it will be necessary to know how and how to wash the foam plastic ceiling tiles, because its varieties may react somewhat differently to washing.

In no case Do not use harsh cleaning agents having an abrasive component, since the surface of the tile may be injured. Dishwashing detergent, which is good at removing grease and stains, or liquid laundry detergent, is best. Some housewives even use hair shampoo.

Attention! Ceiling tiles of any kind are destroyed by chemical solvents. In no case should such solvents remove stains from the foam ceiling.

Extruded and injection ceiling tiles are less whimsical to clean than stamped ones. The latter, due to its high hygroscopicity, absorbs water well, therefore, when wet cleaning, a rag or sponge should be squeezed very well. Such cleaning is best done as infrequently as possible, in case of emergency.

Before cleaning the tiles on the ceiling, it is recommended to whip the soap solution into a strong foam. Apply this foam with a sponge (cloth) to the contaminated surface and wipe gently, without exerting a large mechanical effect on the ceiling material. If after that the remains of water remain in the structure of the relief, they should be removed by wiping with a paper towel or toilet paper, otherwise, after drying, visible dirty stains will remain on the ceiling.

Reference. Ceiling tile manufacturers themselves recommend using a regular stationery eraser to remove stains.

How to clean adhesive from ceiling tiles

Sometimes during repairs, traces of putty or glue may remain on the ceiling. Then a natural question arises: how to clean the ceiling from glue for tiles and other materials? If their traces are still fresh, then the tile can simply wipe with a dry cloth, without water and detergents. In case of drying of foreign material, only putty knife, which will have to act very carefully so as not to damage the foam.

How to clean styrofoam ceiling tiles in the kitchen

On tiles glued in the kitchen, over time, plaque and stains from grease and soot form. This is a natural process, especially in the absence of an extract. So, how to wash the foam ceiling in the kitchen?

The easiest way is to buy special sponge for removing soot and plaque. It is impregnated with a special substance that makes cleaning the kitchen much easier.

If the stains on the ceiling are fresh, it should be diluted in water dishwashing liquid and the resulting foam to wipe off the dirt.

Before washing the ceiling from foam tiles, you can prepare a cleaning solution at home: for 3 liters of water, add one tablespoon of salt - sodium orthophosphate. Dip a sponge into this solution, wring it out a little so that water does not drain and moisten the contaminated surface of the tile with pressure until the yellowness is eliminated.

One of the methods proven by housewives to wash foam ceiling tiles in the kitchen is to use bleach water mixtures, but only if the tile white color.

If you need to remove old stains, you can use alcohol.

Given the characteristics of the foam ceiling tiles, we can conclude that for regular cleaning, the “dry” method is most preferable. And wet cleaning should be done when it is no longer possible to do without it. Monthly use of the vacuum cleaner will help maintain appearance tiles and save the hostess from "wet" troubles.

The tiles on the ceiling are often covered with dust. And in a room where they cook a lot, particles of fat and soot also stick to it. To wash the foam ceiling tiles in the kitchen, you need to arm yourself with a set of special tools and fixtures. Be sure to have store-bought cleaning products on hand. Get rid of the unpleasant smell and soot will help folk recipes. But washing tiles can be avoided if you regularly follow preventive measures.

Why does the ceiling tile in the kitchen get dirty?

Styrofoam ceiling tiles in the kitchen get dirty easily

The type and quality of the ceiling coating determines its soiling and ability to be cleaned.

extruded the tile is supplied with a dustproof and water-repellent layer. Due to this, soot and other persistent contaminants do not stick to it. It is more durable and reliable. After deformation, it returns to its original form. It is not difficult to clean such a tile.

Stamped foam plates have a porous structure. Because of this, they freely absorb kitchen odors, fumes and splashes, which are extremely difficult to wipe off. Tiles of this type should not be glued in the kitchen. And if this happens, it is necessary to regularly clean it from fresh contaminants so that you do not have to fight in vain with old fat and soot.

Injection or seamless ceiling material is not afraid of moisture, so it can be washed with water and detergents. When exposed to direct sunlight, it turns yellow.

The most common causes of tile contamination are:

• High indoor humidity. Due to moisture, the ceiling coating attacks fungus and mold, stains appear. To avoid this, before gluing the tiles, it is necessary to cover up all the microcracks in the ceiling. Frequent airing and well-functioning ventilation will get rid of excess moisture in the kitchen.
• Insects. Fly dots look extremely unpleasant on the ceiling. The best protection against them is a mosquito net.
• Dust and Grease. It is very difficult to avoid these contaminants in the kitchen. Dust flies everywhere, but in the kitchen it becomes greasy and sticky. Therefore, it is more difficult to get rid of it.
• Cigarette smoke. So that the foam is not soaked bad smell Do not allow anyone to smoke in the kitchen.

Deposits accumulated over the years are much more difficult to wash off than fresh dirt. To keep the ceiling in the kitchen looking fresh, you need to make a habit of rubbing it off dirt once a month or two.

Due to the fact that the foam accumulates static electricity, it attracts dust and small debris. Therefore, such a tile gets dirty much more often than a regular whitewashed ceiling. And due to the fact that a large amount of fumes and fat hovers in the kitchen air, they settle on the ceiling as well. At the same time, on a smooth, shiny surface, the dirt is especially clearly replaced.

Under no circumstances should ceiling tiles be washed with solvents.

Styrofoam Ceiling Tile Cleaning Tools

Vacuum cleaner can pick up surface dirt from ceiling tiles

To wash the tiles on the foam ceiling, you need to stock up on a set of equipment that is suitable for this particular case. The work will need:

• Vacuum cleaner with soft fluffy brush. It is used to pre-clean the ceiling from dust and cobwebs.
• soft rag leaving no lint.
• Sponges for washing dishes. If the area of ​​pollution is large, then they will need a lot.
• Highly absorbent dry rag.
• Paper towels or napkins. They are needed to absorb excess moisture.
• stepladder.
  
• Fluffy bristle brush, to remove yellowness and fat in hard-to-reach places. The special dust brush Duster will become an indispensable assistant in dry cleaning. Its negatively charged soft bristles collect and hold dust.
• Bucket or bowl of warm water. Needed for wet cleaning.
• Special sponges for washing dirt from foam. They are impregnated with special compounds and easily remove soot and other impurities from the ceiling.
• Latex gloves.
• Protective glasses. When working with chemicals, it is better to protect the eyes from the ingress of harmful components into them. Moreover, during cleaning, you constantly need to look up.
• Putty knife. After repairs, when drops of glue or putty got on the tile, this device is indispensable. You need to act carefully and carefully so as not to damage the coating.

Sponges should be soft so as not to damage the foam
A spatula is needed to remove traces of glue and putty Eyes and hands must be protected from dust and cleaning agents


To qualitatively wash the ceiling of foam tiles, you should not rush and apply force. Such actions only harm the coating.

An important condition for cleaning the ceiling clean and not rubbing dirt into it: you need to change sponges often. They quickly become clogged with soot and instead of cleaning, they smear the fat.

Household chemicals for foam tiles

If the foam ceiling is so soiled that it cannot be cleaned with a dry method, they resort to wet cleaning. Areas stained with grease and soot are best washed with compounds that can destroy the oily structure of the stain:

• Dishwashing liquids: Myth, Fancy, Fairy, Frosch, Big-Eared Babysitter, Sorts, Sarma, Surprise for Cinderella, Help, I Was Born, Childhood World. In most cases, their aqueous solution can easily wash off most of the stains and soot on the ceiling. This mixture is whipped into a thick foam. Only it is applied to the surface to be treated, not water. At the same time, they do not press and rub with force. The foamed mass is only slightly driven in. And if suddenly there is water on the tile, it is removed with paper towels or napkins. Otherwise, gray stains will appear on the coating.
• Laundry gels without bleach in the composition: Eared nannies, Weasel, Persil, Ariel, Gloss, Pemos, Dreft.
• Hair shampoos. The simplest of them, bought in a store, is suitable for this purpose. To do this, it is diluted with water and whipped until a thick foam is formed, with which the surface is cleaned.





Construction and hardware stores also sell special formulations made for cleaning ceilings of various qualities. The sales assistant will tell you what is better to choose for washing a particular type of tile.

Before using any of the listed agents, its solution is applied to an inconspicuous area of ​​\u200b\u200bthe coating, and the reaction is observed. For this, unused pieces of ceiling tiles are also used. If an undesirable reaction does not occur, then the product is suitable for this type of coating.

Washing powders are not used for cleaning false ceiling. Even a small particle that does not dissolve in water can leave scratches and irreparably spoil the appearance of the kitchen ceiling.

Folk remedies for washing the ceiling in the kitchen

If there is no desire to use chemistry, then the products used in cooking can help in the fight against pollution just as well. At the same time, they are safe for health:

• Salt. 1 st. l. diluted in 5 liters of water. Dip a sponge in the solution and apply evenly to the stain. Do not wash off. The procedure is repeated several times until the other color completely disappears.
• Vinegar. It is mixed with water in a ratio of 1:1. The liquid is washed with places that have especially strongly absorbed kitchen odors. Do not wash off.
• Acetic acid. In the fight against old stains, use it undiluted. Wet a sponge in liquid and wipe problem areas. At the same time, keep safety in mind. Gloves are put on the hands, goggles and a mask are put on the face. And do not forget to turn on the hood and open the windows.
• Alcohol. They moisten a clean white rag, and wipe the stains in a circular motion. The procedure is repeated several times if necessary. Having achieved the desired result, the ceiling is washed with water and dried.
• Eraser. Manufacturers themselves recommend using this stationery to remove fresh stains. Although it is not used in the food industry, the eraser is harmless to human health.

The chemical industry doesn't make anything special for cleaning Styrofoam tiles. Therefore, do-it-yourself products are no worse than the compositions from the hardware store.

Wet the sponge with a cleaning agent only slightly. If the liquid drips down during washing, it means that the ceiling will be covered with wet spots that will spoil the appearance of the tile.

Cleaning steps



Hard-to-reach places can be reached with a long-handled brush

In removing dirt from the ceiling, a certain sequence should be followed. This is necessary in order not to waste time redoing your own mistakes. Here's how to proceed:

1. The entire surface of the ceiling is vacuumed to remove dry dust, cobwebs.
2. Get to hard-to-reach places with a brush with a soft bristle and a long handle.
3. Dirty spots are wiped off with a strictly dry cloth or sponge.
4. Wet cleaning. With help household chemicals or folk remedies remove greasy stains.
5. Wash away odors. For this, homemade recipes are used.

If you arm yourself with the necessary tools, means, and set out to wash the ceiling, then everything will work out. The difficulty lies in the fact that the hands quickly get tired of working in this position. Therefore, you will have to rest often.

Styrofoam ceiling covering can transform the most modest room in the house. With this design, it becomes more beautiful, taller, lighter, more spacious. Complement the advantages of the ability to hide bumps, sound insulation and reasonable price. But the ceiling in the kitchen quickly becomes dirty, and therefore requires special care. In order for the surface of expanded polystyrene to retain freshness for a long time, it is necessary to keep it clean. Consider effective ways how to clean ceiling tiles and remove existing stains.

General rules for cleaning foam tiles

Polystyrene is able to accumulate electrostatic charges and attract small particles: dust, dirt, trace elements from tobacco smoke. As a result, the tile ceiling gets dirty. Methods for removing dust and dirt depend on the type of coating:

• Pressed (stamped)- high porosity and hygroscopicity, gets dirty most quickly and strongly. For tidying it is desirable to clean in a dry way. Washing should be rare and allowed in exceptional cases.
• injection- moisture resistant, usually has a deep relief pattern. Produced, mostly white and may turn yellow over time. In this case, wet cleaning is used. Concave and convex areas are difficult to clean.
• extruded– the laminated film allows exposure to moisture.

• clean regularly, avoid heavy pollution;
• remove stains that appear immediately;
• it is forbidden to use abrasive materials and washing powder;
• pre-clean the recesses and the entire coating with a vacuum cleaner with a soft, fluffy brush nozzle;
• remove the remaining traces with a dry sponge with light cleaning movements;
• choose in advance how to wash the ceiling tiles: gels or concentrates for dishes, laundry, hair shampoo;
• take a napkin for wet cleaning from non-shedding material without lint;
• it is good to wring out the fabric after wetting in the working solution;
• substances with bleach should only be used to cover white;
• remove excess moisture from relief structures with paper towels;
• do not use chemical solvents - you can be left without a ceiling;
• use protective equipment: gloves, goggles, scarf;
• during cleaning, hide food and utensils.

How to wash grease and soot from ceiling tiles in the kitchen

In the process of cooking, expanded polystyrene is exposed to fumes. As a result, a greasy coating with soot particles appears on it. The hostess has a problem: how to wash and at the same time not damage the foam plastic ceiling tiles in the kitchen.

The chemical industry does not produce special products for removing traces of grease and soot from the foam ceiling.

Easy to prepare for pollution control homemade solutions at home from commercially available or at hand substances. Folk remedies operate efficiently and cost less.

The surface is pre-cleaned with a vacuum cleaner and a dry sponge.

Required Substances	Mode of application
sodium orthophosphate: 1 tbsp. l.; water: 3.5 liters.	Moisten a soft foam sponge and wring out. Treat the area to be cleaned. Repeat 2-4 times until grease and soot stains disappear. Do not rinse.
for washing - liquid dish detergent (Feri, Pemolux, Myth, Biolan): 1 tbsp. l. for 250 ml of water; for wiping - 1 tsp. vinegar in 250 ml of water.	Foam the substance in the pelvis. Apply foam. Leave for 15-30 minutes. Clean again if necessary. Wipe with a cloth soaked in diluted vinegar.
liquid detergent: 1 tbsp. l. for 250 ml of water; bleach (for white tiles): 1 tbsp. l., water - 4 liters.	Cover the area with a foamed detergent composition. Treat the remaining yellowness with bleach. Wipe with a damp cloth.
laundry soap: 2 tbsp. l. shavings; 500 ml of warm water; for rubbing - vinegar: 1 tsp. for 250 ml of water.	Dissolve soap. Wet the sponge and squeeze out the remaining liquid. Wash the entire cleaning area. Wipe with diluted vinegar after 10-15 minutes.
sponges impregnated with fat-dissolving chemicals; paper napkins.	Treat yellowed areas. Wipe the entire surface with a tissue.
wet wipes.	Clean up the pollution. Wipe with a dry cloth.
stationery eraser.	After pre-cleaning, rub the stain.
oil primer.	Paint permanent yellowness (especially for pressed products).

What to do with old stains

Pollution with experience cannot be cleaned from the kitchen ceiling with gentle methods. To get rid of them, there are more radical recipes.

Required Substances	Sequencing
ammonia (pharmacy. 10%), water, vinegar in a ratio of 1:1:1.	Apply with wet motions to the dirt. Leave for 5-10 minutes. Wipe with absorbent cloth.
citric acid - 1 tsp; baking soda - 2 tbsp. l.; water - 50 ml.	Prepare a thick mixture. Apply to the area to be cleaned. Leave for 10-15 minutes. Wipe with a clean cloth. If the yellowness has not disappeared, repeat.
table vinegar (9%).	Wet a small sponge. Treat pollution.
concentrated bleach solution (for white tiles): 1 tbsp. l. for 20-40 ml of water	Apply to yellow or smoky area. Leave for 5-10 minutes. Remove with damp cloth
medical alcohol.	Moisten a small gauze pad. Treat the problem area in a circular motion. Wipe with a cloth and dry.

After all steps are completed, excess moisture is removed with paper towels.

How to wash patterned ceiling tiles

The embossed coating looks beautiful and elegant, but it takes more time and effort to return it to cleanliness.

Volumetric ornaments are washed according to the following algorithm:

• the entire area is vacuumed with a soft nozzle;
• relief patterns are additionally cleaned with a brush;
• the detergent is prepared more concentrated to form a persistent foam: 2 tbsp. l. for 100-200 ml of water;
• protrusions and recesses of the ornament are filled with foam using a porous sponge;
• one of the recommended compositions is applied to persistent dirt with a brush or brush with a long pile;
• to remove the cleaning agent, water is sprayed with a spray arm;
• the remaining moisture is removed throughout the structure of the relief with soft paper towels.

Styrofoam ceiling tile care

Keeping the polystyrene surface clean eliminates the need to wash dirt off it for a long time.

1. Dust is removed 1-2 times a month with a vacuum cleaner with a furniture attachment. The mode of operation is selected empirically. The initial level of intensity is minimal.
2. For a thorough cleaning of the relief pattern, a set of soft brushes and brushes with a long pile is used.
3. A good solution to the problem is to take care of the Styrofoam using a Duster dust brush. Due to electrification, dust and small particles of dirt are well attracted to its villi.
4. Cleaning is completed by wiping the entire area slightly dampened with water with an absorbent cloth.
5. Single spots are removed quickly, as they occur.
6. A more serious impact is made if necessary.
7. The pressed (stamped) surface should preferably be exposed to moisture as little as possible.

Conclusion

Regular care of expanded polystyrene will keep it in a clean condition. Pollution in the form of yellowness and soot can really be removed folk ways with homemade formulations. Old stains are removed by local exposure to concentrated substances.