Trap for fruit flies. Homemade flycatcher - how to make a fly trap with your own hands. Glass jar with funnel

Summer is the favorite time of the year for most people in our country. But there are also a few unpleasant moments that appear with the advent of warm days. And one of these moments is the invasion of flies and mosquitoes. They buzz unpleasantly and spread various diseases.

How to get rid of these harmful insects? Can be purchased at the store chemical agent. But chemistry in our life and so abound. There may be allergies to various aerosols, especially in children. Therefore, many prefer homemade devices.

The main types of homemade traps

Lures. The principle of operation of baits is to lure the fly into a closed space from which it cannot escape.

Poison traps are similar in design to regular baits, but their purpose is to kill insects, not just lure.

Electric shockers and electric nets. Shockers kill insects with an electric discharge. Nets attract flies with a bright light, and then drag them into a trap with a makeshift fan.

Let's take a closer look at how you can make the most common fly traps with your own hands.

Plastic bottle

This is the easiest fly trap to make. It is necessary to cut off the upper part, and pour a couple of glasses of water with honey diluted in it into the lower one. Mix properly.

Can be applied Alternative option bait - liquid jam, compote or beer. Turn the top of the bottle upside down and place it in the bottom.

The neck should be several centimeters above the water level. This design will not allow the pest to get out.

Glass jar with funnel

We take a medium-sized jar and place the bait inside (the options from the first example will do). Place a funnel on the neck of the jar. You can start operating.

Both of these traps can be turned poisonous by adding insecticide to the liquid bait.

Plastic container

This do-it-yourself trap option is suitable for fruit flies (another name is fruit fly), because they are small in size and, accordingly, will easily crawl into small holes.

We put in a container favorite treat Drosophila - spoiled fruits. We cover cling film so that it fits snugly to the edges, and we make several holes in it.

Instead of a container, you can use a glass. Basically, for fruit flies any trap will be effective if there are spoiled fruits as bait.

Trap for giving

If you are not lazy and spend a couple of hours of time, you can create it yourself effective trap for flies, which was used by European colonialists when moving to Australia. It is large in size and highly efficient.

To make an Australian fly trap, we need wooden blocks, fine-mesh metal grid, small carnations or a construction stapler, thin wire.

From the rails we make a frame in the shape of a cube. If you have an unnecessary stool with a square base, just remove the seat from it - and the base for the trap is ready. We cover the side walls of the frame with a mesh and fix it with a stapler.

From above, you need to build a mesh cover so that it is convenient to get the catch. Next, we make a pyramid from the grid. Cut out four isosceles triangles (the base of the triangle is equal to the length of one side of the cube). We connect the sides of the triangles with a wire.

Cut off the top of the pyramid to make an "entrance" for the flies. We fasten it along the perimeter of the bottom with a cone inward. Such a trap will be especially effective in the country, where there are a lot of insects. Under it you need to put a fragrant bait and wait.

The fly flies to the bait, and after eating, it tries to fly up and gets inside. A fly does not guess to fly out through a small hole. Her fate is sealed.

Velcro trap

To create such a trap, we need thick paper, liquid rosin, sweet liquid and castor oil. Cut the paper into strips of suitable width and length. We mix all the ingredients, heat it up and apply the composition on paper.

If necessary, we make a loop of thick thread. Velcro is ready. Instead of this composition, you can use purchased glue from insects and rodents.

Another version of Velcro is a CD covered with an adhesive base. It is necessary to tie a loop to the disk, apply jam or honey to the surface and put it in the freezer to make the composition more viscous.

Trap with ultraviolet flashlight

Velcro can be made in a more complex design. For its manufacture, you will need any unnecessary can, for example, a can.

We glue the outer surface with electrical tape, and then remove it so that a sticky layer remains on the surface. Attach a flashlight inside. Insects attracted by the light will stick to the jar. The option is suitable for individuals of small size.

stun gun

We will need a high-voltage module, an energy-saving light bulb (preferably a spiral shape), a battery, a switch, electrical tape, glue. We disassemble the light bulb into components. We get a lid and a flask. We don't need a plinth.

IN plastic cover cut a hole into which we pass the switch. We thread the module itself into the cap and solder it to the switch, the switch to the battery. We attach the module to the cover using hot glue.

The battery can be fixed with electrical tape. We drill two holes in the cone, into which we pass a piece of aluminum wire. We wrap each around the flask so that they do not touch. We cut off the excess.

At the base of the bulb from the inside, we see two wires. We connect one of them to the end of the aluminum wire. There are two free contacts left inside the bulb: the second end of the wire and the “native” wiring from the light bulb.

We connect a high-voltage module to these contacts. We put a lid on the flask. The shocker is ready. It must be hung in a place of accumulation of insects.

electric net

Necessary elements for creating an electric net: a small motor (10-20 W), a light bulb, two tin cans of different diameters, a battery, a round flat board, an aluminum plate (2 by 10 cm), two metal strips, clamps (screws, screws, epoxy glue , rubber ring), nylon bag.

We cut out the blades from an aluminum plate and bend them, as for a fan. We make a hole in the center, put the blades on the motor shaft. Fix with glue.

Fasten the bulb holder with screws to the plank. We connect the cartridge to the motor starter. We place the structure in a jar of smaller diameter and fasten it with screws so that the blades are a couple of centimeters below the edge of the jar. The base of the cartridge must be covered with a second can.

We put a nylon bag on the bottom of the device and fix it with an elastic band. We connect the battery. Ready. Of course, electric fly traps are more difficult to implement, but their effectiveness is quite high.

You can give preference to one of the types, or you can apply several different ones at once. makeshift traps. An integrated approach will be more effective. However, when using any insect repellent, do not forget to keep clean and remove food from the table in time.

DIY fly traps photo

I used to make my own fly traps from an inverted cone, but one day I didn’t have tape on hand, so I decided to make another trap. To my surprise, it worked just as well and was even easier to make.

Fruit flies can be a problem in the kitchen, but getting rid of them is very easy.

You just need to follow these steps:

• Put the bait at the bottom of the container.
• Cover container with foil.
• Secure the film with a rubber band.
• Make holes so that insects can get inside the container.

Step 1: Materials

Materials:

• Container.
• Film.
• Rubber.
• Bait.

Tools:

• Something sharp.

Step 2: Choose a container

You want a small container that won't tip over accidentally (especially annoying if you're using red wine as bait). I think that ideal option are yogurt cups or the bottom halves of plastic bottles.

Plastic containers are good because they are disposable - it's easier to throw out a used trap than to clean out flies from a glass.

Step 3: Making the Bait

To lure the flies, you need to put something tasty on the bottom of the container. It is best to put the food they like the most. They are usually attracted to red wine, banana or banana peel, orange juice. Liquid bait is good because the flies drown in it, and do not have time to lay eggs.

I also learned that it is good at attracting flies Apple vinegar, and a little dishwashing detergent hastens the death of trapped insects.

Note: Be careful with dishwashing detergent. I added an apple scent and it repelled all the flies. I had to make another trap, this time without dishwashing liquid, and it worked as it should.

Step 4: Cover the flytrap with foil and fix it

Cover the container with foil and secure with a rubber band.

Step 5: Making Holes

Make 1-4 holes in the film. Holes should be slightly more sizes flies - say, 2 mm. The tighter the film is stretched, the easier it is to pierce.

Step 6: Remove Other Breeding Sites

In order for all insects to fall into the trap, they should not have any other attractive places left in the house - the garbage must be thrown out, all the fruits should be put in the refrigerator. You will only need to follow this for the first couple of days. The more carefully you keep cleanliness, the sooner you will get rid of fruit flies.

In the summer, when fruit is plentiful, I only try to prevent the appearance of flies and simply set the trap in advance.

Step 7: Freezing

Fruit flies reproduce at a tremendous rate, and if you want them to die in the trap, and not breed in it, then you need to periodically destroy these flies. I think, best option- put a homemade fly trap in the freezer at night.

Flies are the most common and annoying insects that live side by side with humans. Getting rid of them sometimes becomes a real problem, and often you can not do without special tools, one of which is a fly trap. Of course, you can buy it, but it's easy to do it yourself.

Is it necessary to fight flies and why

These insects not only bother with their buzzing - their neighborhood is much more dangerous than it might seem. Flies are carriers of pathogens of various diseases - intestinal infections, eye diseases, tuberculosis. Also, on their paws, they often lay eggs of worms on the products they sit on. That is why the fight against them indoors is an important task for ensuring sanitation and maintaining human health.

The main types of traps, their effectiveness, advantages and disadvantages

One of the most versatile means for exterminating unwanted neighbors is a fly trap. With your own hands, you can make many options for its execution from improvised materials.

The simplest is from a plastic bottle with sweet bait (it also helps against wasps)

Plastic bottle trap

Ease of manufacture is its main advantage. To do this, you need one empty plastic bottle with a volume of 1.5–2 liters.

In order to make a trap, you need:

The disadvantage of this flycatcher is that a small part of the insects can leave the trap, and you also need to constantly change the bait with the caught flies. Fermented bait can smell bad.

Glass jar option

The principle of catching a flytrap from a glass jar is the same as in the bottle version.

It is made as follows:

1. In a jar with a volume of 0.5 to 3 liters, put fruit or pour sugar-containing liquid.
2. Insert the funnel for pouring liquid with a narrow end into the neck of the jar and secure it with tape.
3. Place the trap where you want to catch the insects.

The effectiveness of this flytrap is comparable to that of a bottle trap. Periodically it is necessary to change the bait and remove the caught insects.

Analogue from any container and cling film

For the manufacture of this flycatcher, a plastic container of any shape is used - round or square. The trap is done like this:

The principle of operation of the trap is the same as the previous ones. Some flies may leave the trap, and its effectiveness will depend on how attractive the bait is to the insects.

Household adhesive tape

The advantage of this trap is that the flies do not need to get inside closed space, which scares some insects, so its effectiveness is higher than the previous options presented. You can make it yourself as follows:

1. Mix 2 parts pine resin with 1 part linseed oil and a small amount of sugar syrup.
2. Cut strips of plastic film 3-4 cm wide.
3. Apply the prepared adhesive mixture with a brush to the tapes.
4. Hang traps in the room where you want to destroy insects.

One of the disadvantages of adhesive tapes is their poor aesthetics.

"People's" insect repellers - plastic bags with water

A simple, albeit somewhat controversial fly protection solution. In order to make such a repeller, you need the following:

The inventor claims that this device can be compared in efficiency with mosquito nets, but this is a rather controversial issue.

Velcro pendant from CD

To make this trap, you need the following:

The disadvantage of this flycatcher is that it is periodically necessary to clean the disk of flies, lubricate it with an adhesive base and send it to the freezer.

How to make an electric fly trap

For the manufacture of this category of traps, you must have electrical skills. In addition, you need to have a list necessary materials, which will not be in every home.

Electric landing net: manufacturing instructions

The principle of operation of this electric trap is based on the belief that flies will fly to the light of the lamp, however, even professional flytraps using lamps to lure turn out to be more effective against mosquitoes, while flies, according to user reviews, often bypass the trap.

To make this flytrap, you will need the following materials and tools:

• Pliers;
• Screwdriver;
• Scissors for metal;
• A small electric motor from the player;
• Ordinary light bulb with a cartridge;
• Pair cans with different diameters;
• Aluminum or tin strip 20x100 mm in size;
• 2 washers made of plastic;
• Epoxy resin with a thickener;
• metal strips;
• Screws and bolts M4;
• Round base made of wood;
• Nylon stocking;
• rubber ring;
• The power source is a pair of AA batteries.

As you can see, this device is not the latest invention, but also Soviet

You need to make a trap as follows:

The disadvantage of this trap is the complexity of its manufacture and low efficiency for catching flies in comparison with other traps.

Electric shock flytrap

To lure insects in this flycatcher, the light of a lamp is also used, which in practice is far from always effective against flies. To make it, you will need the following materials:

• Bulb housekeeper;
• Ordinary finger battery or "Krona".
• high voltage module.
• aluminum wire.

The electric shock is made as follows:

1. Disassemble the housekeeper and drill two holes opposite each other on the sides of the plastic base.
2. Insert an aluminum wire into each hole and wrap it around the body.
3. Connect one of the wires that come out of the neon lamp with the end of the wire.
4. Connect the remaining two contacts of the neon bulb to the high-voltage module.
5. Connect the high voltage module to the batteries through the switch button.
6. Fix the module and batteries on the bulb body with electrical tape.
7. Turn on the device - insects attracted by light when touched aluminum wire will be amazed electric shock.

The disadvantage of this trap is that it is also unsafe for a person if, inadvertently, touching a bare wire, it also has low efficiency compared to traps that use sugar-containing substances or pheromones as bait.

Plants that are eaten for flies

Predatory plants are quite an exotic way to catch flies, but they can still help get rid of a few annoying insects. Most often in room conditions the following species are grown:

Industrial traps for rooms and garden

There are also industrial versions of fly traps.

• Aeroxon. glue trap, which composition of a bait includes environmentally friendly ingredients.
  
• DELUX AKL-31. A trap whose principle is based on attracting insects with ultraviolet light. Flies flying up to her are struck by an electric shock. Although the manufacturer positions it as a universal device against mosquitoes, mosquitoes and flies, the latter rarely become trophies of this trap.
  
• FC001. A mechanical trap, inside which it is necessary to insert a tablet with an attracting substance, which includes synthesized (Z) -9-Tricosin - a pheromone secreted by flies to attract individuals of the opposite sex during mating. The action of the tablet is very long - 2-3 tablets may be enough for one season.
  

Professional traps vary in cost, and they are also superior in convenience and efficiency to home-made options.

The cutest option is the Australian bollard trap

This trap can be used outdoors - for example, near the dining table under a canopy in the country, as its trapping capacity is quite high, and maintenance operations are extremely rare.

Outwardly, the flycatcher looks like a bedside table from wooden frame with small legs, covered on all sides with a fine mesh, under the bottom of which a saucer with a sugar-containing liquid is placed. The secret of catching flies lies in the pyramidal shape of the mesh bottom of the trap, in which there is a hole. As a rule, having satiated, the flies fly up, not paying attention to the transparent mesh.. As a result, insects enter the flycatcher through a hole in the bottom.

For the manufacture will require the following materials:

The process of making a flycatcher is as follows:

1. From wooden planks, assemble the frame in such a way that the whole structure stands on legs about 5 cm high, attach the upper part to the canopies and equip it with a hook.
   
2. Cover all sides, except the bottom, with a metal mesh.
3. To make a pyramidal bottom of the trap from the mesh, connecting the seams of the mesh with metal screws, you can also use staples for a furniture stapler for this.
4. At the top of the pyramidal bottom, cut a hole 2 cm in diameter so that the flies enter the trap through it.
5. Lubricate all joints between the mesh and wooden planks with sealant.
   
6. Place the trap in the required place, after placing a saucer under it with an alluring liquid - sugar syrup or jam. Industrial fly attractants can also be used.
   

The advantage of this flytrap is that maintenance is rare, because sometimes it is only necessary to release the flies from the trap, and also to replace the attracting liquid in the saucer.

Prevention of the appearance of flies in the house

In order for the flies not to annoy, it is necessary to constantly adhere to preventive measures that prevent their appearance:

By following these preventive measures, you can significantly reduce the number of annoying insects. It is also recommended to install traps even in rooms where the number of insects is negligible.

Drosophila do not pose a direct danger to humans. But their presence in the house brings a lot of inconvenience. Many housewives are wondering "How to get rid of midges." This problem is of particular relevance in the warm season, when the season of fresh vegetables and fruits comes.

Differences between Drosophila and other midges

Midges are unpleasant neighbors that cause a lot of inconvenience to humans

Drosophila belongs to the category of Diptera fruit flies. The number of their varieties reaches 2000. The size is 1-3 mm. The insect has an oval body of dark yellow or Brown, 6-8 paws and 2 wings.

Sometimes there are orange and black midges, but this is a rather rare occurrence.

Drosophila differ from other varieties of midges in habitat, degree of danger, reproduction rate and gastronomic preferences. These insects are the most harmless to humans. But their presence causes some troubles:

1. They ruin food supplies. Moreover, it can be both a large warehouse and a small cellar. If fruit flies settle in large food stores, the products will become unusable, which will entail significant losses.
2. They cause no less harm in private cellars and basements, where bags of sugar, flour, boxes of potatoes or tomatoes are stored. Drosophila can damage fruits that have not yet been harvested.
3. Neighborhood with these midges cannot be called pleasant. They can fly into the eyes, nose, mouth, and also contaminate curtains and wallpaper.

Reasons for appearing in the apartment

Drosophila spread rapidly. The female lays about 20 eggs at a time. They are born in the early morning. Therefore, waking up, you can find a lot of fruit flies in the apartment, which were not there yesterday.

Important! Insects are able to reproduce already eight hours after birth; the larva turns into an adult in 8-10 days.

They enter the apartment in different ways.

1. Fruit flies lay their eggs in the skins of fruits and vegetables that we bring into the house. Midges choose soft fruits, the peel of which they can bite through. Distinguishing damaged fruit is an almost impossible task.
2. Insects also start in the trash can.
3. Another way for midges to enter houses is open entrance doors and open windows. Drosophila attracts the smell of fruits. Insects can take up residence even if you use cherry, lemon or orange scented air freshener.

Larvae can be seen only at an early stage of formation, when the midge has just laid its eggs. During this period, their size reaches only 0.5 mm. The larvae are identified by white color. Further, they take on the color of the fruit, so we cannot identify them when buying fruits or vegetables.

Midges can enter the house through open windows and doors, as well as fruits and vegetables brought into the apartment.

How to get rid of fruit flies

There are many ways to eliminate insects. You can find special devices for sale or make them yourself.

store funds

To combat Drosophila use:

• traps;
• sprays;
• repellents;
• zappers.

Traps

Among the traps are the following models:

• BEAPCO 6-Pack Drop-Ins Fruit Traps;
• Victor M380 Fly Maqnet 1-Quart Reusable Trap With Bait;
• Fly Web Fly Trap;
• TERRO Fruit Fly Trap T2500.

1. The duration of the first device is one month. The kit includes six traps and a liquid, non-toxic chemical. One set of BEAPCO 6-Pack Drop-Ins Fruit Traps will last for six months. The chemical can be replaced with apple or wine vinegar. The trap works in the following way. An insect flies in through a special hole and cannot get back out. The midges do not die from the poison, they are simply trapped. BEAPCO 6-Pack Drop-Ins Fruit Traps are compact in size. This allows you to place traps throughout the apartment.

BEAPCO 6-Pack Drop-Ins Fruit Traps are compact

2. The Victor M380 Fly Magnet 1-Quart Reusable Trap With Bait comes in white and black. It also includes a non-poisonous chemical liquid. Drosophila fly into the lid of the device and remain inside. This trap has some advantage over other models, it can be used repeatedly. The device just needs to be rinsed with water. The model is designed to fight fruit flies, bees and wasps will not be able to fly into it.

Victor M380 Fly Magnet 1-Quart Reusable Trap With Bait

3. Fly Web Fly Trap attracts fruit flies with ultraviolet light. The trap has a built-in double 9W light bulb. The midges fly to the radiation and get on the adhesive tape, which must be changed as it is used. The advantage of the model is the absence of chemicals and odors. The device requires power to function.

The device is exposed to ultraviolet light

4. The action of TERRO Fruit Fly Trap T2500 is aimed specifically at fruit flies. Other insects will not fall into this trap. It is made in the shape of an apple and has a characteristic smell. The duration of operation is 30 days.

Flavored trap

Zappers

Zappers act on midges with electricity, as a result of which insects die. We recommend the following devices:

• Electronic Indoor Insect Killer Zapper-15.5 Inch is a fairly effective zapper, however, it should be borne in mind that this is a bulky device that consumes a significant amount of electricity, so for small apartments such a model will not be very convenient;
• The Executioner Fly Swat Wasp Buq Mosquito Swatter Zapper is small in size, but its effect only applies to midges that fly close to it. To get a result from this device, you need to direct the fruit flies in its direction. The power source is batteries, that model does not depend on the mains;
• Rechargeable Electric Insect Bug Bat Wasp Mosquito Zapper Swatter Racket anti mosquito killer Electric Mosquito Swatter.

Zappers have greater efficiency compared to other anti-fly devices

Repellents

Among the repellents, you should pay attention to the Hot Shot 5580 No Pest Strip model. It is a strip small sizes impregnated with chemicals. The repellent is in a special container. It is hung in a room that needs to be cleared of midges. Poisonous vapors begin to emanate from the tape, as a result of which the insects leave the apartment. A person does not feel this effect. But you need to ventilate the room.

Repellents act chemically

Spray

Sprays will help get rid of midges and destroy their larvae. Garden Safe Insecticidal Soap Insect Killer 24-Ounce Ready To Use Spray 10424X is designed to treat indoor plants. When the product gets on midges or eggs, they die. This effect is provided by fatty vegetable acids, which are part of the spray. It does not apply to humans.

Spray - safe remedy, but less effective against fruit flies

Other means

1. If fruit flies are localized in the sewer or sink, Invade Bio Drain Gel-1 qt will be required to eliminate them. The drug is available in the form of a gel, does not contain aggressive chemical elements. Has a pleasant smell. It dissolves organic matter in pipes, destroys insects and larvae. If the spray is poured into a spray bottle, it can be used as a sprayer.
2. Insects can harm not only fruits, but also houseplants. They lay their eggs in the ground, and the larvae feed on the root system. As a result, the plant dries up and dies. Grom-2, which is available in powder form, will help to cope with such a problem. But first, separate the diseased plant from healthy flower. Then sprinkle the powder into the soil. Work with gloves and a mask. The room after the procedure must be ventilated.

Folk methods

You can make a device for combating midges on your own. There are several options for traps:

1. One of the delicacies that fruit flies are very fond of is bananas. Peel them off and place them in plastic bottle or plastic bag. Then poke holes with a toothpick. Place the trap close to where the insects are. Within 1-2 days, a significant part of midges will fall into it. They will not fly out of the trap.
2. You can fight insects with liquid. To do this, you need a regular deep plate. Pour juice, honey, syrup or apple cider vinegar into it. Then put the peeled fruit without peel. Cover the plate with cling film on top. Just like in the first option, pierce holes. homemade device for the destruction of Drosophila is ready.
3. Another way to get the midges out is to make a trap in the shape of a cone. Find a glass jar and put a rotten fruit in the middle. If there is no such fruit, you can use a piece of orange or banana. Roll a sheet of paper into a cone shape and insert it into the neck of the container. Insects will fly into the jar, but they will not be able to get out.
4. Drosophila can be smoked. Grind camphor, pour it into a pan and put on fire. When steam appears, carry the dishes through all the rooms. For humans, this procedure is harmless.
5. A vacuum cleaner will help eliminate midges. Treat insect habitats with it, shake the bag outside the house.
6. If you notice larvae on plants, water them twice a month with a weak solution of potassium permanganate. For this purpose, you can stick 3-4 matches into the soil with the sulfur side down.
7. Drosophila are mainly localized in the kitchen. Inspect food, remove rotting fruits and vegetables. Store undamaged fruits in the refrigerator or in the cellar.
8. Geranium will help scare away fruit flies. They do not tolerate the smell of this plant.
9. Similarly, insects react to garlic. If you can tolerate its smell, grind up a few cloves and put them in the kitchen. Remove after a few hours.
10. Peel an orange, wrap a clove stick in the peel. Place this remedy on the areas of insect localization.

There is a huge number of diverse fly traps from domestic and foreign manufacturers. They differ in principle of action, design, efficiency, price. You can easily make a fly trap with your own hands from improvised means or with minimal financial costs.

Types of traps, principle of operation

Fly traps do not harm human health, are environmentally friendly, and are not inferior in efficiency to purchased drugs. The devices are easy to use, they are sold in the warm season all over the world. affordable price. On the Internet you can find a lot of tips for making homemade traps without much effort.

Popular types of traps are:

• insecticidal fly exterminator;
• ultraviolet destroyer;
• electronic fly swatter;
• window fly trap;
• bait-trap.

In the process of selecting a trap, it is imperative to take into account the radius of impact, the area of ​​\u200b\u200bthe room in which the device will be used.

• Ultraviolet fly killers lure with ultraviolet light. Flying up to the device, the insect receives a discharge of current from the grid, behind which there are lamps. Dying, the flies accumulate in a retractable tray that is easy to clean.
• The fly trap is made on the basis of the container inside which the bait is located. Does not consist of poisons, other harmful substances. Once trapped, the fly cannot get back out. Some types of traps are reinforced with a thermal effect or emit carbon dioxide, simulating human breathing. This is what attracts pests.
• The electric fly swatter is a type of fly swatter. The principle of operation is identical. Due to the glow, it lures insects to itself, after which it kills them with a current discharge. For people, the device is safe to use.
• Window fly traps are made to order. Both sides of the trap are coated with a sticky compound. One side of the trap is attached to the window, the other duct tape attracts flies. It is recommended to cling to the windows on the sunny side of the house for the best effect. Change as insects stick. The manufacturer indicates that such a device lasts for six months.

On a note!

The principle of operation of absolutely all traps is to attract insects,. The destruction process itself is different. Attract flies with heat, smells, light. Based on the mechanism of action of purchased devices, structures, you can make them yourself.

Conditionally divided into two types - baits, Velcro. Inside the baits you need to put the favorite delicacy of the flies. Use jam, rotten fruits, vegetables, honey. It is better not to use fish, meat because it quickly begins to emit a fetid odor. For flies, such aromas are a joy, but it is impossible for a person to be near such bait.

You can be creative, come up with your own effective design.

Electric fly trap at home

In most cases, the device is bought, but you can do it yourself.

You will need:

• light bulb housekeeper;
• high voltage module;
• insulating tape;
• hot glue;
• finger battery.

Manufacturing process:

1. Disassemble the light bulb so that there remains a plastic case, a bulb with tubes that are attached to the case.
2. Make a through hole in the plastic, take an aluminum wire, thread it through one of the holes.
3. Wrap the wire around the light bulb, remove all unnecessary. Do the same with the second hole.
4. There are 2 wires inside the base. Wrap one around the tip of the wire and bend, leaving 2 contacts.
5. Connect the high-voltage module to the finger battery through the switch.
6. Make holes, insert the switch, the module into the housing.
7. It is necessary to solder the wiring, wrap the soldered wires of the module to the battery with electrical tape, and glue the module to the base with hot glue.
8. Insert a light bulb into the base so that the contacts touch the contacts of the module, screw it in and turn on the device.

On a note!

Flying into the light of an electric trap, pests will be struck by a current discharge upon contact with it. The method is very effective, but also dangerous. Not recommended for use near small children, pets. There is one minus - as soon as the battery is dead, the device needs to be redone. Not everyone wants to mess around with the preparation of a complex design. Most people prefer to buy a ready-made device.

Popular commercial fly traps

When choosing effective remedy you should pay attention to the following products:

• Exterminator Pomel DUO LT-60 (Poland). A trap that uses replaceable sticky paper cartridges instead of an electrical discharge. By emitting ultraviolet radiation, it lures insects to itself, which, when ingested, stick to the paper. Due to the absence of a spark, this exterminator can be used on explosive objects. It receives power from the mains 220 V. In the middle there are 4 lamps of 15 W each, 2 replaceable sticky paper cartridges. Device dimensions 350x470x120 mm. The price is about 2000 rubles.
• Light trap Economy 14 w (Poland). Effectively fights flies, mosquitoes. Inside is a cartridge with sticky paper. Insects, flying into the light, fall into a trap, immediately sticking to the trap. Ideal for children's rooms, bedrooms, kitchens. Range up to 40 sq. m. Works from the socket. Device parameters 65x280x330 mm. The cost is about 2500 rubles.
• Destroyer N'oveen IKN-36 IPX4 (Poland). The principle of operation is the same as that of other exterminators. Suitable for indoor and outdoor use. It is waterproof, so destruction occurs even in rainy weather. For the best effect, you need to hang it away from other light sources at a height of up to 2 m. The range is up to 120 square meters. m. Dimensions 510x135x310 mm. The price is about 3000 rubles.
• Vaco window trap (Poland). Attaches to window with adhesive. Insects are attracted to the pheromones that come from this trap, and when they sit on it, they stick tightly. Change as the tape sticks with flies. Valid up to 6 months. The price is about 50 rubles.

Which traps to use indoors: purchased or homemade - the decision is individual. It is necessary to focus on efficiency, safety, ease of use. electric trap from flies is more powerful, but also the most expensive in price.