The device is alive and dead. The design of a home-made device for obtaining living and dead water. Removal of dead skin from feet

Alternative treatment with living and dead water is becoming more and more popular. This method seems to have come to us from Russian fairy tales. In fact, a liquid with healing properties is formed as a result of electrolysis. In this article, we will consider how the treatment takes place, and also reveal the topic "living water - preparation".

What does alive and dead mean?

Dead water is acidic, its electrical potential is positive. Living water is a negatively charged liquid and has a pH greater than 9, that is, it is alkaline. Both types of water are used in alternative medicine. There is a treatment of living and dead water.

Effect on the body

What is the benefit of living water?

Living water stimulates vital processes in the body:

1. Rejuvenates the body
2. Increases immunity
3. Accelerates metabolic processes
4. Heals wounds

Dead water properties

The properties of dead water are also very valuable:

1. Good disinfectant
2. Has a bactericidal effect
3. Relieves colds
4. Eliminates fungus

Treatment with living and dead water has become popular because the scope of its application is quite wide. Next, we will consider such a question as living water - preparation and the necessary devices for this.

What do you need to have?

To prepare the desired water, special activator devices are sold. You can make them yourself at home. What is needed for this:

1. Water. The ideal option there will be spring water, but not everyone can find it, so ordinary tap water is fine. It must be defended throughout the day.
2. Two glass mugs
3. Two stainless forks
4. Bandage and cotton
5. Lamp for 20 W.
6. Wire with plug

Most homes have these items. If something is missing, you can buy more.

Living and dead water - preparation

To prepare living water, you need to perform quite simple manipulations:

1. Place the forks in the cups with the prongs up;
2. Connect a diode to one of the plugs, the end of which you connect to the wire;
3. You can make the system stronger by using electrical tape;
4. Fasten the free end of the wire to plug 2.

Ready. Now it remains only to plug the plug into the outlet. Attach the diode to the lamp. If the lamp is on, then everything is done correctly. Turn off the network. Now prepare a "bridge" for the ions - wrap the cotton wool with a gauze bandage.

Fill the cups equally with water, place the cotton bridge in such a way that it connects both cups. That's all. Now you can connect the system to the network. After 10 minutes you will have ready living water.

Results

After disconnecting the system from the network, remove the bridge. In the cup to which the diode was attached, the water will be dead, since there is a positive charge there. In the other, living, negatively charged water.

We remind you that the plugs should be pulled out of the water ONLY after the appliance has been disconnected from the mains. Otherwise, you will be electrocuted.

This is how you can very simply build a system yourself at home and carry out treatment with living and dead water.

Preparation of melt water

When water is frozen, a very useful liquid is also obtained. It is not living water, as some say. Read more in the article: But it also has a number of useful properties and you can make living and dead water from it.

For cooking, water must be defended for a day, or cleaned with a filter. What's next:

• Heat the water without boiling. This will eliminate some of the harmful compounds.
• Let the liquid cool down room conditions temperature.
• Neutralization of water from deuterium. Discard the first ice that forms during freezing, it will contain this dangerous isotope, since it freezes at more than high temperatures first.
• The liquid is sent back to the freezer. It freezes and looks like this: transparent at the edges, white in the center. Pour boiling water over the white part and discard. It will contain harmful substances. The clear ice melts and you can drink it.
• Melting should take place at room temperature. The resulting water can be drunk, and you can also wash your face with it. When boiled, such water may lose its medicinal properties so you shouldn't do it.

Recipes treatment of living and dead water.

Here are some recipes on how to treat living and dead water:

1. Allergy. For three days, gargle with dead water after each meal. 10 minutes after rinsing, drink about half a glass of live water.
2. Constipation. Drink half a glass of live water.
3. Eruptions on the skin. Wipe your face with dead water for about a week.
4. Angina. Gargle with dead water ten minutes before eating. Then drink a quarter glass of live water.
5. Diarrhea is treated with half a glass of dead water. If it does not help, then you can drink the same amount in an hour.
6. Diseases of the liver and their treatment with living and dead water. The first day drink dead water in half a glass 4 times. Then for the rest of the week, half a glass of live water, the same number of acceptances.
7. Migraine goes away after drinking half a glass of dead water.
8. Gastritis. Half an hour before meals, drink living water as follows: a quarter cup on the first day, half a glass on the following days. The course is 3-7 days.
9. Pressure. If the pressure is low, then drink half a glass of live water 2 times a day. If the pressure is high, then use dead water. Don't drink for more than a week.

Since ancient times, in Russian fairy tales, such a concept as “living” and “dead” water has arisen. It was necessary to wash the wounds with “dead” water, and they healed, and only a few sips of “living” water were able to revive a person. You can believe or not believe these fabulous legends, but scientists managed to make such a magical liquid. Of course, she is not able to resurrect a person, but she has some unique properties.

This process is called electrolysis, and it occurs as a result of influences electric current to plain water. During such exposure, several substances are formed: ozone, acid, oxygen, chlorine, hydrogen, hydrogen peroxide and nitrogen.

After the completion of activation, it is divided into two factions - negative and positive ions. Water with negative ions is called catholyte, or, in a popular way, “living”, and water charged with positive ions, anolyte, is popularly called “dead”.

Characteristics of living and dead water

"Dead" water - has an acidic environment and its pH is from 2.5 to 5.5 units. It is used for the prevention and treatment of various colds, such as influenza, SARS, tonsillitis. Reduces blood pressure, has a calming effect on nervous system person and improves sleep. It is used for some dental problems such as periodontal disease treatment, bleeding gums, removal of tartar. Significantly reduces joint pain. Helps with various intestinal disorders. Heals in a few days fungal diseases skin.

"Living" water- has an alkaline environment and pH 8−11 one. It is a good stimulant and source of energy for the body. Vigor and strength appear, cell regeneration is accelerated, blood pressure increases, and metabolism improves. Excellent for wounds, burns, bedsores, ulcers.

Where can I get a device for activating water?

It's easier, of course, not to bother and buy in a store. In which? It is enough to enter a query in a search engine and a bunch of sites with addresses of shops in your city will appear, but the prices for such devices are quite high, and if you look, there is nothing complicated. Therefore, it is quite possible to make an apparatus for preparing living and dead water with your own hands.

This will require the following :

Assembly order

Making an activator with your own hands happens like this:

1. The edge of each electrode (10 mm) must be bent 90 degrees, then these edges should be placed on the cover and fixed with bolts or screws. It must be remembered that the electrodes should be parallel to each other and at a distance of about 4 cm.
2. A diode is attached to one of the electrodes and a wire is connected to its upper output. A wire is also soldered to the other electrode. Both outputs must be closed at the switch.
3. If a waterproof bag is used in the design, then you need to put it on a plate with a diode.
4. If instead of a canvas bag there is any container, then you just need to place it inside the can, and we can assume that the assembly of the activator device with your own hands is completed.

You can start to the production of living and dead water. For this you need:

• Fill both containers with water. It is better to take a clean spring. If there is none, then ordinary tap water will do, but it will need to stand for about a day.
• The anode-plate is placed in a bag, dead water will form there, and the cathode-plate is placed in the main tank, there will be living water.
• It remains to plug the plug into the outlet and wait from 5 to 10 minutes.

After preparing the activated water, it must be immediately poured into 2 different jars so that the reverse reaction does not take place and all the components do not mix.

There is another way to assemble the device with your own hands, it is a little easier, for this you will need:

The assembly scheme is simple:

• In both mugs you need to put the forks with the tip up.
• A diode is attached to one of the forks between the teeth.
• It is necessary to attach a wire to the diode, one end of it should go to the light bulb, and the other end of the wire going to the lamp will join the free plug.
• All wire connections must be wrapped with electrical tape.
• Cotton wool is wrapped in a bandage. You should get a flagellum, about 15 centimeters long.
• Pour water into the mugs, you need to wet the flagellum and put it on the edges of the mugs in the form of an arc.

The device is ready.

Terms, conditions of storage and care of the device

Store activated water in the dark glass jars with a tight cover, it is impossible for sunlight to penetrate. It is also not recommended to boil and store in the refrigerator. The dead liquid is stored for up to 3 weeks, and the living liquid loses its unique properties very quickly, so it must be consumed within a few hours. During operation, scale will form on the electrodes and jars. To remove it, you need to swap the electrodes and turn on the activator in the network. Then rinse all parts with plain water and dry.

Safety

In the manufacture of the device and the preparation of activated water, precautions must be observed.

• Any actions with the device can be performed only when it offline.
• If the second assembly method is used, then in no case should the harness be touched during operation of the device, it is energized.
• Also, in the second case, contact between the mug bodies should not be allowed.
• Don't let children to the activator.

And although water activators are not too expensive, sometimes situations happen that a person simply cannot purchase a much-needed device at a given time. This is quite fixable: you can make a simple water activator with your own hands.

The first requirement for every person who undertakes such work is to understand the topic. That's right: you will have to be guided by electrical circuits.

The second rule is to create such a device only in the most hopeless situations. Here it is necessary to explain in more detail: the electric activator of water collected in the "field" conditions will never give that quality result, which is guaranteed by the manufacturer from the enterprise.

This option is really only needed for emergencies(for example, when the country ran out of clean water). The difference is the following.

1. The purchased device is sent to deep cleaning, including various impurities. He is able to work with large volumes, while maintaining the required quality. In addition, the warranty period indicates the long-term operation of the device.
2. The "home" device gives very low cleaning qualities. It is best to use it in case of a one-time need. Homemade will not help to cope with stiffness and glandularity.

According to experts, the constant use of purified water homemade way will damage health. Often at home it is unrealistic to choose the actual stainless steel material for the manufacture of one of the anodes. This will lead to the fact that when passing through such an electrode current, the water (and then the body) will receive harmful metal ions nickel, vanadium, chromium, molybdenum. Their long stay and accumulation in the body lead to serious diseases.

After using industrial activator devices, this does not happen - here, a titanium coating or a special food grade stainless steel is used for cathode production. And for the anode, they take platinum or other special coatings. At home, of course, there are no such resources.

If, after such warnings, there is determination and relevance in the manufacture of a home-made activator, then you should familiarize yourself with further material.

Ways to create water activators

The most natural and effective magnetic water activator is a piece of silicon placed in it. After that, the container should be left to infuse for several days. However, this is not always convenient if there is an urgent need for cleaning, but there is another, more difficult option manufacturing.

You will need the following components:

• diode bridge;
• a can of water with a volume of 1 liter;
• electrodes made of food grade stainless steel;
• canvas bag, which will become a separating membrane.

A sample for the manufacture of a canvas bag can be the material of a fire hose. If possible, it can be replaced with a ceramic unglazed glass.

The simplest circuit looks like this:

Again, the following requirements must be observed:

• the distance between the electrodes should not exceed 40 mm, and they should not reach the bottom of the jar;
• stainless steel sheet dimensions - 40x160x0.8 mm.

The electrodes are fixed on a plastic piece (acts as a cover). Here it is also necessary to install a diode bridge with a switch. electrical safety remains relevant - that is why at the top the structure should be closed with a lid that is suitable in size.

Operating rules

It is allowed to use tap water, however, with the chlorinated version, it is worth letting it stand for a couple of hours. Another variant - boiled water. The plus type of the electrode is lowered into a tarpaulin filler (or a ceramic glass), and the other electrode will go into a jar. Now you can connect to the mains: inside the tarp there will be acidic water with a pH of 6 or less, and in a glass container it will become alkaline with a pH of 10 (7).

Usually, after turning on the device in the network, it takes from 3 to 8 minutes to prepare water of the required concentration. At the same time, it usually heats up to 70 degrees. After that, the plug is disconnected from the power supply, the tarpaulin is quickly pulled out, and the “dead” water (+) is poured into another container. Otherwise, the solutions will quickly mix and beneficial features will be lost.

Sometimes white flakes can float in the "live" liquid. Do not be afraid, these are just hardness salts released in the activation. You can remove them with a filter or just settle and drain the sediment.

Both solutions should be stored in a dark container with a tight lid:

• the properties of "living" water will remain for a month;
• the "dead" - no more than two hours.

It is better to use both solutions obtained immediately, rather than storing them for a long time.

If food grade stainless steel was used for the electrodes, then the process can be repeated for 2-3 cycles. However, some measures are necessary to maintain the instrument's performance.

1. The cathode and anode should be interchanged from time to time so that the electrode self-cleaning.
2. A canvas bag is treated with table vinegar, immersing it there for half an hour. A small dish will do, in which it can fit. After this procedure, the material is washed under running water.
3. Store the bag and jar separately.

In addition to these rules, the following safety precautions must be observed.

1. Turn on the device only when it is filled with water, and the electrodes are located inside the jar.
2. Do not touch the body of the operating device.
3. Keep children away from it and do not leave the device unattended.

At the first opportunity, it is better to purchase a model of industrial production. This must be done for the safety of your own health and those of your loved ones.

Hours in gym, multi-kilometer runs, severe dietary restrictions ...

What kind of sacrifices do women not make for the sake of chiseled and slender legs! And the results will certainly become visible sooner or later: the buttocks are tightened, fat is leaving the hips. But the shins do not always respond to efforts, and sometimes even become larger.

Bulky calves look inharmonious, interfere with wearing short skirts and tight trousers, and become the cause of complexes. Sometimes the desire to reduce calves reaches the point of absurdity. Thus, in the United States, it is gaining more and more popularity. Plastic surgery for the correction of this part of the body.

In order to quickly and correctly get rid of large calves, first of all, you need to find out the main reason for their appearance and try to eliminate it.

The main "culprits" - an excessive layer subcutaneous fat, too voluminous muscles that appeared as a result of training or are a hereditary feature.

Genetics. If large shins are your genetic feature (this can be seen by looking at your parents and immediate family), then reducing the muscles on the calves will be extremely difficult.

You can try to slightly change the proportions of the body and adjust the features of the anatomy. For example, if you have a short Achilles tendon that connects the back of your heel to your calf, then your calves will look bigger. This is due to the fact that the muscle has to stretch down a lot to connect with the short tendon.

If the tendon is long, then the place of its connection with the muscle is higher. As a result, the calf muscle "sits" high, the lower leg looks thinner and more elegant. Unfortunately, tendon lengthening is not possible. The only thing that can be advised in this case is to avoid loads that provoke the growth of the calf muscles.

Gait and movement. Repeated day-to-day actions can affect the shape of your legs. For example, walking on your toes all the time, with your body weight on the forefoot (as when wearing heels), can lead to calf muscle buildup.

It is also worth analyzing your gait: with weak other leg muscles, especially the tibialis anterior, the calves can compensate for the entire load, increasing over time. The solution to the problem is a comprehensive strengthening of the leg muscles.

Body fat is another very common reason why calves look big. Each person has their own specific problem areas, from which fat goes last. If these are calves and ankles, then you will have to be patient and persevere in order to find the legs of your dreams.

• Remember that it is impossible to lose weight locally, along with the calves, the hips and buttocks will decrease. You may need to add isolated exercises for them if your goal is to be in good shape.

• For slimming legs, drying the muscles of the thighs and calves, cardio training with minimal or no resistance is recommended. This means that on the street you need to choose a flat place, and on the treadmill to install minimum slope. It is with such training that the legs and calves will lose weight and at the same time acquire a beautiful shape. Endurance running helps to reduce the calf muscles and fatty tissue around the calf (as well as throughout the body), which make the legs look bulky. Double benefit - burn fat and reduce muscle!

• Avoid exercises aimed primarily at developing leg strength, as they cause muscle growth and make the calves even more voluminous. For example, short and intense cardio workouts, strength exercises for the legs (squats, lunges), step aerobics, mountain hiking are contraindicated. Walking uphill, including on a high-incline treadmill, makes the calves even bigger.

• Do not jump rope and generally avoid jumping with high leg lifts. Swimming, walking, cross-country and elliptical trainers are more suitable for losing calves. The elliptical trainer is a great tool for low-intensity cardio when you set the resistance to the minimum. Instead of burning calories by increasing resistance, increase your exercise time. Long walks also slim down the lower legs, as they lengthen the hamstrings and calf muscles.

• Avoid step machines and other exercises that simulate climbing stairs or mountains, as they primarily increase the calf muscles. Remember that your goal is to make the calves thinner, not to "pump" them even more.

• It is better to refuse resistance training or perform more repetitions with small weights. Weight-bearing exercises that involve the calf muscles only lead to more calf muscles, even if your goal is fat loss. It is absolutely impossible to reduce the point of the lower leg with their help. Effective Methods to get rid of calf fat - diet, low-intensity cardio and liposuction.

• Stretching exercises help stretch and lengthen the large calf muscles, including the “pumped” ones. For this purpose, you can attend stretching training, yoga or Pilates. Great calf exercises can be done against a wall. Stand facing her, one foot at a distance of 25-30 cm from the wall, the second - at 70-80 cm, the feet are parallel, the heels are on the floor, and the socks are looking at the wall. Bend your front leg while keeping your back leg straight, lean over and place your hands on the wall. You should feel the stretch rear surface legs and especially calves. Hold this position for 15-30 seconds, switch legs and repeat. This exercise helps stretch the calf muscles.

• Pilates is great for shaping toned and elongated muscles. Even with intense workouts, your calves will not swell.

• The following simple calf stretching exercise can be done anytime, at work or at home. Sit on a chair, with your back straight, press against its back. Raise your left leg and make 6 rotational movements clockwise with your foot. The amplitude should be maximum. Repeat the same number of times on the other side, and then do the same exercise on the right leg.

• There are many ways to visually reduce large calves with clothes and shoes. By resorting to them, you can make the legs in girth look a few centimeters smaller.

Remember, you can be in good physical shape, fit and slender without protruding muscle bumps. The main thing is to correctly draw up a training program that includes strength and cardio exercises and avoid stress and diets that provoke growth. muscle mass. With such tactics, volumes (and not only calves!) will steadily decrease.

How to treat full calves, each woman decides for herself. For example, actresses Mischa Barton and Katie Holmes are not shy about these body parts and look great. Even if you are unable to reduce calf volume, do not dwell on it. Focus on the best parts of the body and emphasize them.

Maintain your health and deal with various diseases, you can use specially processed simple drinking water, as they said in the old days, dead in combination with living. This is a miracle of nature that can cleanse our body and rejuvenate it. It is only important to properly dispose of this miracle given to us!

Advice from Professor, Doctor of Medical Sciences I.P. Neumyvakina (Living and Dead Water: Truth or Fiction).

Many buyers ask: Why doesn't the device for making Living and Dead water have a timer???

We answer.

Because, the time (speed) for the preparation of Living and Dead water depends on the composition (concentration) of salts and minerals in the source water.

The composition of water per day in the tap can change several times, checked by the TDS - meter.

The more salts and minerals in the water, the faster the water heats up during electrolysis and vice versa.

With a high concentration of salts, water during electrolysis can heat up to 40-50 degrees in 1,2,3 minutes and vice versa, at a low concentration in 15, 20, 30 minutes or more.

There is no benefit from the timer, and maybe harm. You will rely on the timer, and he will also let you down. And why complicate the design of the device, the fewer connecting nodes, the more reliable design. Less chance of breakage. Right???

Therefore, the preparation of Living and Dead Water should be monitored not by time, but by temperature. It does not require a thermometer. It is easy to check the heating of water by touch on the outside of the jar.

Moreover, the device must not be left switched on unattended!

The device for preparing activated Living and Dead water is a lightweight, uncomplicated, compact device that allows everyone at home to get about 1 liter of activated (“live” - 700 ml, and “dead” - 300 ml) in just 5-6 minutes. ) water. To do this, it is enough to fill a liter jar with water, as indicated in the instructions, plug the plug into a 220V socket and after 5-6 minutes, drain the already activated water into different vessels. The device is electrically safe, reliable, and consumes electricity like a 60-watt light bulb.

The process of making Living and Dead Water is very simple:

Take a regular, glass 1 liter jar ( jar NOT INCLUDED), insert a canvas bag into it ( included in delivery), pour water into the jar and into the bag at the same time so that the upper edge of the bag is above the water level, by about 1 cm, so that the water does not mix, then place the anode electrode (+ M) in the bag, it will turn acidic (Dead) water, and you simply place the cathode electrode (-Ж) in a jar, in the jar behind the bag you will get alkaline (Living) water, if the electrodes are reversed, in this case you will get alkaline (Living) water in the bag, and acidic (Dead) in the jar. Turn on the device. When the water in the jar heats up to 40-50 degrees Celsius, the electrolysis must be stopped.

After electrolysis, you take out the device and very simply take out the bag from the jar with acidic (Dead) water, pour the water from it into another dish, alkaline (Alive) water remains in the jar. All activated (Live) and (Dead) water are ready.

For this model of the device, the electrodes are made:
The cathode is made of food grade stainless steel with the addition of TITANIUM,
The anode is made of ultra-pure GRAPHITE.

Stainless steel, the vast majority of metals and alloys are not resistant to anodic dissolution.

When an electric current is passed, the electrodes made of these materials dissolve, and nickel, chromium, vanadium, molybdenum ions pass into the water, poisoning it. In the manufacture of electroactivators intended for medical research, resistant materials are usually used. In particular, for the manufacture of anodes - nickel or titanium, cathodes - platinum, ultrapure graphite. For diaphragms, porous fluoroplast or ceramics are taken.

Living and Dead water has properties similar to those of body fluids (blood, lymph, etc.), so the body does not need to modify it, it immediately joins the vital activity and thereby eliminates the causes of many diseases.

Living and dead water are also used in everyday life, gardening and horticulture, for hygiene purposes, in animal husbandry, poultry farming, beekeeping, etc.

If you pay attention, under the main photo of the device on this page, there are small photos, if you open the photo with tomato seedlings, you will clearly see the difference in two containers, in growth and appearance seedlings. Tomato seeds of the same variety were planted on the same day, those on the left were watered with plain water, and those on the right, activated with Living Water. This result is nothing more than a direct confirmation of the beneficial effects of Living Water on plant growth, as well as on all living things and the human body.

By adjusting the duration of the electrolysis, it is possible to obtain water of the required concentration of ORP (Oxidation Reduction Potential), which
measured in units - mV.

Dead water (acidic), ORP of this water +400 mV and more, excellent bactericide, disinfectant.

It is used in the prevention and treatment of colds, flu, tonsillitis.
Reduces blood pressure, calms the nervous system, improves sleep.

Helps in the treatment of periodontal disease, stops bleeding gums, dissolves stones on the teeth.
Reduces joint pain. Quickly helps with intestinal disorders.

Dermatomycosis (fungal skin diseases) disappear in a few days.
The disinfection properties of dead water are enhanced if 0.5 g is dissolved in 1 liter of water. - (on the tip of a knife), table salt before turning on the electrolyzer.

Household purpose: Disinfection of residential and non-residential premises, drinking water, soil, containers, clothes, shoes, removing scale from the walls of dishes, increasing the shelf life of vegetables and fruits, and much more.
Normalizes the work of the digestive tract in pets and poultry.

Living water (alkaline), the ORP of this water is 100 mV or more, an excellent stimulant, tonic, energy source.

It sets the whole body in motion, gives energy, vigor, stimulates cell regeneration, gently increases blood pressure, improves metabolism.

Perfectly heals wounds, ulcers, including stomach and duodenal ulcers, bedsores, burns.
Helps in the treatment of prostate adenoma, in the treatment and prevention of atherosclerosis, polyarthritis, osteochondrosis.

Household purpose: Accelerates the germination of grains and seeds for planting, stimulates the flowering of house flowers, revitalizes green vegetables and wilted flowers, improves the taste of baked goods (when kneading dough with live water), the quality of the syrup for feeding bees (the bees become more energetic), stimulates growth and disease resistance poultry and livestock (decrease in the mortality of young animals), watering the beds with live water stimulates the ripening of the crop.

Joint application living and dead water helps fight diseases such as allergies, hepatitis, psoriasis, female diseases (colpitis, cervical erosion).

Activated water is used in Japan, Austria, Germany, Poland, India, Israel, CIS countries. This water is absolutely not dangerous either for external or for internal use. This was confirmed back in 1988 by the pharmacological committee of the USSR (DESOLUTION Mo. 211-252*/791).

PAYING SPECIAL ATTENTION that in different cities the mineralization of water is different. Mineralization - the amount of dissolved salts, minerals in water. The higher the mineralization of water, the faster the process of electrolysis (preparation of water) and vice versa.

In order to obtain water with the ORP (oxidation reduction potential) necessary for the body, it is necessary to stop electrolysis (water preparation), at the moment when the water in the jar is heated to a temperature 40-50 degrees Celsius, i.e., holding the jar, the hand freely endures, while the time of electrolysis does not matter. DO NOT bring water to a boil!!!

Water for the preparation of F and M water is taken from the tap, preferably passed through a filter - a jug (Barrier, Aquaphor, etc.)