Cement chandeliers please show. Spectacular do-it-yourself lamp in loft style. Step-by-step master class with a photo. Tablet stand

Do you like unusual interior items? Looking for a lamp that fits modern interior loft style or minimalism? This tutorial will help you find a solution. It will take only two hours to make an original pendant lamp made of ... concrete.

Basic materials

1. Cement and sand or high strength ready mix cement

Advice. If desired, you can use two or more mixtures of different colors to diversify the design of the lampshade. You can also use special colored dyes for concrete.

2. Wire with or without switch

Advice. It is worth paying attention to quality, do not forget that the cord must withstand the weight of the concrete lampshade. In order to be sure of reliability, you can additionally use a metal chain for hanging.

4. Tube with thread and nuts to it

Advice. These products can be bought at a lighting store or removed from an old electrical appliance.

5. Self-tapping screws

6. Two plastic bottles of different diameters

Advice. A bottle of a larger diameter is selected based on the desired size of the lamp and its shape. good option can become an ordinary two-liter container. Keep in mind that the embossing on the bottle will also be printed on the outside of the lampshade.

Council. A bottle of smaller diameter should be without embossing. Its size must be chosen so that a cartridge with a lamp can be placed inside. The inner space of the lampshade should not be too narrow and long, so that you can later change the lamps without any problems.

9. Tin can (optional)

Tools

1. Scissors
2. wire cutters
3. Small drill or screwdriver (optional)
4. Small spatula for mixing concrete
5. Hacksaw (optional)
6. paper knife

Do not forget:

• container for mixing cement;
• cover the surface of the table;
• prepare a rag to wipe your hands and excess concrete.

After everything you need is prepared, you can get to work.

Step by step photo tutorial

1. Cut off the bottom of the larger bottle.

2. Drill with a drill or make holes in the covers in other ways. It is more convenient to work when the caps are on the bottles. Remember that the holes must be located strictly in the middle so that the thickness of the ceiling is the same on all sides. The hole must be large enough for the tube to pass through freely.

3. Attach the tube to the bottom bottle cap.

3. Attach the top bottle.

As a result, you should get something like this:

4. Fix on the sides of the bottle with self-tapping screws. This will avoid offsets.

5. Prepare the concrete mixture. Fill the form. While working, do not forget to shake the bottle to ensure a tight fit of the concrete. It can also be tamped with a stick.

Advice. If you want the surface of the luminaire to be smooth, use thick concrete. A liquid consistency will help create an unusual effect of a surface covered with shells.

Advice. To make pouring concrete more convenient, you can install the bottles on a tin (as shown in the photo below).

6. After the concrete is tamped, you can remove the screws and tamper again by pressing on the smaller bottle. Be careful not to shift the center. Form an edge.

Advice. The edge can be either smooth or asymmetrical.

7. After the concrete has partially dried (depending on the brand used), the bottles can be carefully removed. Do not forget that at this time the lampshade is fragile and easily damaged.

The well-known concrete, it turns out, is not so prosaic as to be a sign of exceptionally dirty construction sites. This is a very artistic material, from which interesting crafts are obtained in skilled hands.

We are ready to confirm what has been said. We look at the photo, dear readers.

Rooms for houses

Such a cute thing can be placed in your garden (found on chezlarsoon).

Drawer handles

To make these things, you will, of course, need the concrete itself, screws and small cardboard boxes, for example, from under the light bulbs. It's very simple (found on projektila and signedbytina).

bottom for a vase

Not every interior is suitable for the depicted design. However, the novelty and remarkableness of the idea is no less than that (found on adailysomething).

Watch

The item is easy to make. Any shape and design. You just need to find a suitable mold, pour the solution into it. After it dries, the mechanism is attached (found on instructables).

Tablet stand

The basis of the product is a regular popcorn bucket.

Crafts in a frame

Concrete is great for small crafts. A mold, a solution, some time to dry, and now the original thing is in the hands. It can be decorated with a frame (found on skonahem).

Heart shaped pens

Hooks

Light bulbs-hooks - such a project is perhaps one of the most interesting. Why? Yes, because the idea of ​​a new life for ordinary old things is always attractive in itself.

And the functional component of the craft is also significant. You can even hang quite heavy things on fixtures - a coat or raincoat (found on instructables).

Fridge magnets

An easy item to make. The main thing here is to push the magnet in before the concrete has completely cured (found on athomeinlove).

Table numbers

The strength of the products is obvious. And after drying, they can be diversified with bright paint (found on loveandlavender).

Cutting board

The finishing touch when creating such a household item should be sanding to make the board perfectly smooth (found on adailysomething).

Candlesticks

An ordinary milk carton went into action (found on chezlarsson).

You can play with the shapes and sizes of products (found on inmyownstyle).

For creating original crafts absolutely any means at hand will come in handy - coins, duct tape, plastic cups, baking dishes (found on sayyestohoboken, signepling and naver).

Used the bottom of a plastic bottle (found on ellasinspiration).

And then the master found a use for a simple tin can (found on monsterscircus).

With a little imagination, here's an original piece for you (found on nimidesign).

Concrete pots for plants

Items can be of any shape different color(found on ruffledblog).

Several triangles connected and made a pattern. And already on it they made such a piece of furniture (found on abeautifulmess).

And again, an ordinary plastic bottle inspires the creation of a cute contraption. Convenient in that you can vary the height of the product (found on handmadecharlotte).

Flowers in concrete! Yes, even stylish asymmetry in execution. Such a trinket is good as a gift (found on the site).

And here are examples of symmetrical pots of all shapes and sizes. Looks nice, very modern.

concrete lamps

Another one bright idea. When the shape for the base of the lamp is selected, then you just need to be patient. You will have to wait a little while the solution hardens (found on pastill).

Concrete is great for decoration lighting fixtures. It is durable and stable. In addition, with the design there is an opportunity to experiment to your heart's content, casting exactly the shape you want (found on the site).

This lamp only needed balloon. Then do not forget to make holes for the wires and smooth the surface with a sponge (found on elinsvra).

A lampshade of this shape will look good in the kitchen. It can be painted in your favorite color (found on esmeraldas).

Concrete and plastic bottle are just made for each other. So many interesting options. The bottle is also beneficial in that it is convenient to bring wires out through the neck (found on brit).

Recently, concrete has become a popular and fashionable addition to the interior. As an element of decor, it entered the design with the loft style in the 50s of the last century. Today, concrete can be used to make tables, dishes, chairs, furniture fronts, sinks and much more. In this article, we'll show you how to do table lamp from concrete with their own hands.

What is concrete?

Concrete is an environmentally friendly product that can be recycled and reused. The recipe for making concrete is quite simple. All you need is cement, gravel, sand and water. The exact ratio of all components of the solution is very important, since the strength of future products depends on this. The main component of the concrete mixture is cement. When choosing its brand, you should determine the level of load and the impact of external destructive factors.

Photo: do-it-yourself concrete lamp

Pay attention to the water that you will add to the concrete mix. If it contains components that violate the structure of concrete, it is better to refuse it. River or lake water is ideal. Speaking about the ratio of proportions, you can see them on the back of the package. Remember that such a ratio is rather conditional, therefore, without exact calculations, an unexpected result may turn out.

Do-it-yourself loft-style concrete lamps at home

To create a concrete lamp with your own hands at home, it is best to use decorative concrete. The composition of such concrete includes natural ingredients, so it is safe for health. In addition, decorative concrete allows you to imitate various coatings: wood, stone, decorative tiles, bricks and much more.

No matter what kind of concrete you use, it is recommended to sift it before mixing. It is important to use a construction mask that will protect Airways from harmful dust.

What do you need to make a loft lamp with your own hands?

Concrete is perfect for implementation creative ideas. Despite the coldness of the material, such products bring comfort, warmth and complement any style of interior. Concrete can also be combined with other materials. In the manufacture of a concrete lamp, you can give any color using special dyes for concrete.

The main advantage of concrete is naturalness and environmental friendliness. You can easily make it yourself, without using any special materials, tools and accessories.

How to make a table lamp with your own hands? You will need:

• strong cement-sand mixture;
• drill;
• cord;
• lamp holder;
• threaded tube;
• two plastic bottles of different sizes;
• wood screws.

The first thing to do is prepare the bottles. To do this, cut the bottom and drill holes in the bottle caps. The size of the hole must be such that the threaded tube can be inserted. Then insert the tube into the holes obtained and fix its position with the nuts. Screw the resulting design onto the bottles. Use self-tapping screws to stabilize the bottles. In this way, a form is prepared for a concrete lamp.

Now you can start mixing concrete. The main thing is not to overdo it with water. The mixture should resemble cookie dough. Mix it thoroughly so that each grain of the mixture is wet. Remember that all concrete work must be done with gloves, as concrete dries the skin a lot, and concrete dust is not removed from the lungs.

Lay out the resulting concrete form. Use a large spoon to fill the mold. Shake and squeeze the bottle a little after each scoop to make sure the mixture is evenly distributed. Shake well at the end. This will help remove excess bubbles.

Do not forget to immediately wash the dishes in which you knead the concrete. Otherwise, it will quickly seize, and it will be extremely difficult to remove it.

After a couple of days, as soon as the concrete hardens, you can cut off the plastic bottles with a knife and remove the screws. Since the concrete will be rough, it is best to sand the surface with 120 grit sandpaper.

The last step is to connect the cord through the metal tube to the socket and switch. Make sure the lamp is well anchored so that the fixtures can support the significant weight of the concrete.

Ordinary concrete having an unsightly grey colour, not particularly beautiful. Therefore, it is recommended to use decorative concrete - a material that combines the low cost of components, ease of manufacture, aesthetic appearance and increased strength.

Concrete color

A concrete structure does not have to be gray and dull. Thanks to modern technologies, mineral pigments and metal oxides, you can give concrete products any shade. Dyes are durable and will not lose tone during operation.

The color of concrete can be changed by various methods. You can apply a layer of paint to an already finished product or add coloring additives even at the stage of mixing the components.

DIY loft table lamp

You can also make a concrete lamp using a milk or juice carton. The manufacturing principle is the same: fill the mold with concrete and leave room for the cartridge. After a couple of days, remove the packaging and get a chic decoration for your home.

Concrete lamps are creative, fashionable and durable. Interestingly, if you already have cement, such a handmade product will cost you much less than a purchased lamp. Do not be afraid to dream, fantasize and bring your ideas to life!

Among DIY enthusiasts, concrete has become a fairly popular material due to its low cost and ease of use. Concrete lamps are very heavy and cold, but this fact does not affect the versatility of such devices, they will perfectly fit into any interior design. To this end, designers create various forms from cement, they are originally decorated and painted, giving it such shades as gold, silver or copper.

It is worth noting that designer-made concrete lamps are highly valued, so not everyone has the opportunity to acquire such a luxurious product. To save your Money you can create this light source with your own hands.

Concrete light fixture using package

Before proceeding with the manufacture of this type of fixtures, it is necessary to prepare the following materials:

• milk carton. An important condition is that the packaging should not let moisture through, otherwise the concrete will lose its strength. How bigger size a lamp is planned, the larger the package should be chosen;
• a plastic bottle into which the light source should then be placed;
• dry mix for concrete.

The first step is to get rid of the bending edges of the package and install a plastic bottle into it. Next, you need to drill holes in the resulting structure. To facilitate this process, it is recommended to pre-drill holes in these places using a nail or screwdriver. Then you should fix the bottle with a bolt, passing it through drilled holes and fixed.

To maintain the moisture resistance of the packaging, the joints must be treated with a sealant. Thus, we get the base where the concrete will be poured. The dry mixture is diluted with water according to the rules described in the instructions for it. The main thing here is to prevent excess liquid.

Consistency ready solution should be similar to sand dough. Therefore, water should be poured in gradually, while each particle of the mixture should become wet. After preparation, the concrete should be placed in a previously made form, pressing it tightly enough, thereby excluding the formation of empty seats. For complete deaeration of the product, the bag must be thoroughly shaken.

All tools must be washed immediately after use, otherwise the concrete mixture will seize, which will make its removal almost impossible. After two days (so much is required for the concrete to harden), the package should be disposed of and the bolt unscrewed. To give the concrete lamp originality, it is recommended to make additional holes in it. This will help diffuse the light output. A light source is placed in a plastic bottle, which is then connected to a switch. The finished device can be placed both on the wall and suspended from the ceiling.

Lighting fixture using a bottle

Less popular are pendant lamps from concrete. This device is easily made independently. For this purpose, materials such as a sand-cement mixture containing gravel, water, a network source, an electrical cord, self-tapping screws (designed for working with wood), steam plastic bottles(differing in size), a lamp holder, as well as additional devices: a knife, a drill, a threaded tube. First you need to prepare the bottles. To do this, cut off their bottom and drill holes for the threaded tube.

The lamp socket is fixed with nuts and self-tapping screws on both sides, so that the base for the lamp is considered prepared. The next step involves preparing a cement-sand mixture, after which it is necessary to fill the base (using a spoon) for the lamp with it, pressing down a little. This method of laying concrete helps to remove excess air, and also ensures an even distribution of cement.

When the concrete becomes hard, the plastic is removed with a knife along with self-tapping screws. The uneven surface of the concrete must be treated with sandpaper, which has a grit size of 120. The last step is to connect the cord to the light bulb and to the power source. Given the mass of the concrete product, you should make sure the strength of the fastening.

Concrete Garden Light

These products are perfect for general form garden plots. In addition to their main function of lighting, they serve as a decorating element. Following the recommendations described below, it is quite possible to make these lamps with your own hands. First you need to make formwork. The material for it is a sheet of plywood, whose thickness is 12 mm.

When creating a form, you should ensure that it can be easily parsed. It is desirable to cover the details of the base with varnish, which will then help to disconnect it from solid concrete intact. Repeated varnishing will allow finished products to gain shine and shimmer. The wiring of a concrete lamp can be organized using foam or corrugated pipe. The first option is the most optimal, due to which the mass of the lamp is significantly reduced, and the cost of concrete is reduced.

Garden Concrete Lamp

Glue is used to secure the foam. In addition, another advantage is the ease of material removal. If there are fragments that are difficult to get rid of, it is recommended to use acetone, which completely dissolves the foam. The next step is to create the formwork inside the product. For this purpose, it is possible to use both plywood and cardboard.

The main thing is that their walls have a thickness of at least 25 mm. Also, this formwork should be made in the form of a trapezoid, which will ensure ease of removal. Styrofoam grooves for wiring are laid in the openings. As cement mixture It is allowed to use both ready-made and self-made.

When choosing the second option, M-500 cement is used in combination with sand (ratio of one to three). Gravel or granite chips (one part) can serve as an additive. By diluting the mixture, it is necessary to achieve the consistency of shortcrust pastry. At the next stage, the concrete is laid in the formwork. First of all, it is recommended to fill hard-to-reach places, and then the rest of the space.

To make the mixture lay down more densely, a vibrating grinder should be used. The product filled with concrete mixture should be covered with plastic wrap for at least three days. This will eliminate the possibility of water leakage from the concrete, as well as give it strength. After the mixture hardens, the formwork is removed, the lamp is polished, and the lamp is installed.

Such material as concrete today is used not only for construction purposes, but also for interior decoration, representing an original and stylish decorating element. The main advantage of the above concrete lamps is not only unusual design but also simplicity self-manufacturing. In addition to lamps, due to the ability of this material to take various forms, various vases, tables and chairs, flower pots are created.