How to make a lampshade from plastic spoons. Do-it-yourself production of an original lamp from spoons DIY chandelier from spoons

Crafts from spoons with your own hands - we make a creative chandelier

Wanting to equip their apartment, people increasingly began to resort to self-manufacturing important interior details from improvised means. Someone likes to show their creative nature in this way, while someone is just trying to save money. But regardless of your motives, the result is always simply amazing. It turns out that plastic spoons can be used as the main material in the manufacture of a chic chandelier! This product is indistinguishable from the store, however, to achieve this effect, you must clearly follow the instructions.

- a 5 liter plastic bottle;

- plastic spoons;

- nippers or scissors for finishing spoons;

- glue gun;

- bulb.

Stages of work on a homemade chandelier from spoons:

1) It’s worth starting work by cutting off the handles from the spoons. With side cutters, this can be done neatly and without unnecessary damage to the plastic.

2) Then cut off the bottom of the bottle with a clerical knife.

3) The base is ready, you can start gluing the spoons to the bottle, with the convex side out. Spoons should be laid out in a checkerboard pattern, leaving no gaps in the bottle. This work is very simple, but requires accuracy and scrupulousness.

4) Now you need to make the neck of the bottle. The same plastic spoons are used, only they are glued at a different angle. It is necessary to connect them in a circle, attaching one to the other so that the cut off handle was not visible.

5) Next, you need to work on the electrics. A small hole as thick as a wire is made in the bottle cap, we thread it there, and then we screw the light bulb into the cartridge. The light bulb is used only energy-saving, as it does not heat up and, as a result, does not melt the chandelier.

6) We put the decoration on the neck of the craft and twist the lid. We should have a light bulb, a cartridge and a piece of wire inside the bottle.

7) If desired, this chandelier can be painted, or simply painted in the desired shade or color.

The chandelier is ready! Even if you do not decorate it, it looks very impressive. When you turn on the light bulb, light penetrates through the spoons, creating a play of shadows and colors.

Watch a useful video on the topic: DIY spoon crafts

Plastic spoons are also used in the manufacture of flowers, vases, original wall clock and lampshade. Having shown imagination, you can slightly change the technology, then you get a unique one of its kind spoon craft.

In the design of the design of a room in an apartment or in a country house, you want something different from others. This can be done by combining incompatible things. For example, as in fig. 1. For this lamp, some parts from an old chandelier were used, supplemented with ordinary disposable plastic spoons. You can use such spoons in the manufacture of lamps of various designs. A few of them are worth considering in more detail.

Figure 1. Do not rush to throw away used plastic spoons, because you can assemble a beautiful and interesting lamp from them.

Required Parts

For work, you need to prepare the following tools and parts:

Figure 2. To make a lamp from spoons, you will need: plastic spoons, a cord, a lamp, plastic bottles, a glue gun, a stationery knife, a screwdriver, a cartridge, side cutters and an awl.

1. Energy saving lamp. It practically does not heat up when burning. For a plafond made of plastic parts, it is very well suited, as it does not pose a fire hazard.
2. Electrical filling. You should dig in your workshop and find a piece of electrical cord, a socket for screwing in a light bulb and an electrical plug. The holder must necessarily match the type of lamp base, which can have a diameter of 27 and 14 mm. A switch of any type that is installed in the break in the cord may also come in handy. If these details are not found in household You can buy them at any electrical supply store.
3. Plastic container for liquid products. It is better to use a bottle of 3-5 liters.
4. Plastic disposable spoons. Their color may or may not be white. You can buy them in any quantity in many grocery stores, stalls, cafes. They are cheap, so you can buy a whole package, because. after making a trial product, most of them have a fantasy and a desire to do something else like that.
5. Glue electric gun. It may be needed to glue some parts when assembling the lamp.
6. Stationery knife. Needed to cut some parts plastic bottle and spoons, for cutting various holes in the details of the chandelier.
7. You may need an awl, thin wire, side cutters. It all depends on the intended design of the lamp.

Back to index

Making a lamp

All parts are prepared (Fig. 2), you can start tinkering:

Figure 3. The electrical part of the lamp is assembled from a socket, plug and cord.

1. First you need to prepare plastic spoons in a special way. They need to carefully cut off the handles with a clerical knife or side cutters, leaving about 5 mm, which may be needed.
2. The bottom is cut out from a plastic bottle with a capacity of 3-5 liters. It is preliminary recommended to apply a cut line with a felt-tip pen or marker.
3. Using a glue gun, glue the cut spoons to the walls of the bottle. Work starts from the bottom of it. Spoons are glued close to each other around the circumference of the bottle. The next row is glued in a checkerboard pattern. Peculiar scales from the spoons of the next row should be located between the scales of the previous one. The very last top row can be glued separately in the form of a circle and close the neck of the bottle with this design, attaching it with a few drops of glue.
4. going to electrical part, consisting of a cord, cartridge and plug. An energy-saving light bulb is screwed in, all this is placed inside the bottle. electrical wire is pulled through the bottle cap through a specially drilled hole. The lid is screwed onto the neck (Fig. 3). You can turn on the chandelier lamp and admire its soft light. Additional options decorative design your imagination will tell. For this purpose, you can use various beads, rhinestones and other items that you need to look for among household items. Try to paint the spoons themselves with phosphorescent or ordinary acrylic paints.

Back to index

To make a table lamp, you need disposable plastic spoons. Their number depends on the number of tulips. Each tulip requires 6 spoons to make. Work sequence:

Figure 4. For each tulip of such a lamp, you will need 6 plastic spoons, which are glued together in the form of a bud.

1. Handles are cut off spoons. For the manufacture of such a lamp, they are not needed, but may be needed for other crafts. 3 spoons are glued together to form bud petals. The remaining 3 petals are glued to them from above.
2. Buds glued from spoons are painted with aerosol paints from a spray can. The color can be chosen at the request of the master.
3. At the junction of the petals of the bud, a hole is made for the stem. It can be drilled or burned with a soldering iron, electric burner, hot metal rod. The functions of the stem are performed by a plastic tube for a cocktail. It is inserted into the prepared hole and glued with a glue gun. Leaves cut from a green plastic bottle can be glued to the stem.
4. An LED is inserted inside each tulip. If the buds of tulips are colored, then its color can be any. It is connected to the network through a resistor. If this is not done, it will heat up, which may cause a fire.
5. Ready flowers are collected in a bouquet and placed in suitable dishes. It can serve as a transparent container, which can be filled with multi-colored balls of aqua soil. They will add additional beauty to a product created from spoons with your own hands. The lamp is ready (Fig. 4).

Such a cute lamp can be made from unnecessary plastic bottles and spoons. I love you very much original ideas design with my own hands, and even more so when it is super economical and provides a lot of space for imagination. See for yourself!

Let's now look at how to make a lamp out of plastic spoons in more detail.

• 3 or 5 liter plastic bottle;
• packaging of plastic spoons;
• NECESSARILY! Energy-saving lamp, so that the light does not melt;
• plastic;
• stationery knife;
• glue gun.

If all the necessary things are collected - we proceed!

1. We cut off the handles at the spoons with a clerical knife under the very base (we will not need them).

3. Glue our spoons around the perimeter of the bottle.

4. We glue the final edging in this way.

The lamp is ready to be assembled.

As a result, you will get such a chandelier, glowing with a pleasant matte light.

This is how the lamp will look when the light is on.

After your work has dried, you can paint it with acrylics and glue rhinestones for volume. In the evenings, rhinestones will flicker on the walls with rays, creating an atmosphere of comfort and mystery. And lovers of something extravagant can use phosphorescent paints (they are sold in stores for artists), which warm up when the lamp is on, and after turning off they glow all night ...

It will be a surprise for your household! Good luck!

www.DenisMas.com

SHARE WITH FRIENDS

P O P U L I R N O E:

Many of us have our own private houses, dachas, garden houses or "haciendas". If the dacha is located near the city, some families generally move there for the whole summer, and if there is a warm, heated house, they spend a lot of time in the winter. Life in nature is beautiful, no doubt, but you still want some of the benefits of civilization like running water. Often there is no central city water supply in the country, and a well is used as a source of water. The depth of the well is usually much greater than the depth of soil freezing (for the Moscow region up to 1.5 meters).

You can easily and simply make a beautiful gift bag out of paper and not only ...

To make the package you will need: a color printer, scissors and glue.

The package can be made together with the children - it will be interesting and useful, and you will also get a good gift with your own hands!

What to do if the hen did not arrive in time? And the number of young animals obtained is not always satisfactory, and serial incubators are expensive.

There is only one way out: try to mount it yourself.

The camera for a simplified model of the incubator can serve as ordinary cardboard boxes, pasted inside and out with layers of thick paper, wooden frames, sheathed on both sides with plywood or plastic, filled inside and between the walls with glass wool, dry sawdust, foam plastic.




Popularity: 5 224 views

In the design of the design of a room in an apartment or in a country house, you want something different from others. This can be done by combining incompatible things. For example, as in fig. 1. For this lamp, some parts from an old chandelier were used, supplemented with ordinary disposable plastic spoons. You can use such spoons in the manufacture of lamps of various designs. A few of them are worth considering in more detail.

Figure 1. Do not rush to throw away used plastic spoons, because you can assemble a beautiful and interesting lamp from them.

Required Parts

For work, you need to prepare the following tools and parts:

Figure 2. To make a lamp from spoons, you will need: plastic spoons, a cord, a lamp, plastic bottles, a glue gun, a stationery knife, a screwdriver, a cartridge, side cutters and an awl.

1. Energy saving lamp. It practically does not heat up when burning. For a ceiling made of plastic parts, it is very well suited, as it does not pose a fire hazard.
2. Electrical filling. You should dig in your workshop and find a piece of electrical cord, a socket for screwing in a light bulb and an electrical plug. The holder must necessarily match the type of lamp base, which can have a diameter of 27 and 14 mm. A switch of any type that is installed in the break in the cord may also come in handy. If these parts are not found in the household, they can be bought at any electrical store.
3. Plastic container for liquid products. It is better to use a bottle of 3-5 liters.
4. Plastic disposable spoons. Their color may or may not be white. You can buy them in any quantity in many grocery stores, stalls, cafes. They are cheap, so you can buy a whole package, because. after making a trial product, most of them have a fantasy and a desire to do something else like that.
5. Glue electric gun. It may be needed to glue some parts when assembling the lamp.
6. Stationery knife. You will need to cut off some parts of a plastic bottle and spoons, to cut various holes in the details of the chandelier.
7. You may need an awl, thin wire, side cutters. It all depends on the intended design of the lamp.

Making a lamp

All the details are prepared (Fig. 2), you can start making the original lamp with your own hands:

Figure 3. The electrical part of the lamp is assembled from a socket, plug and cord.

1. First you need to prepare plastic spoons in a special way. They need to carefully cut off the handles with a clerical knife or side cutters, leaving about 5 mm, which may be needed.
2. The bottom is cut out from a plastic bottle with a capacity of 3-5 liters. It is preliminary recommended to apply a cut line with a felt-tip pen or marker.
3. Using a glue gun, glue the cut spoons to the walls of the bottle. Work starts from the bottom of it. Spoons are glued close to each other around the circumference of the bottle. The next row is glued in a checkerboard pattern. Peculiar scales from the spoons of the next row should be located between the scales of the previous one. The very last top row can be glued separately in the form of a circle and close the neck of the bottle with this design, attaching it with a few drops of glue.
4. The electrical part is assembled, consisting of a cord, a cartridge and a plug. An energy-saving light bulb is screwed in, all this is placed inside the bottle. An electrical wire is pulled through the bottle cap through a specially drilled hole. The lid is screwed onto the neck (Fig. 3). You can turn on the chandelier lamp and admire its soft light. Options for additional decorative design will tell your imagination. For this purpose, you can use various beads, rhinestones and other items that you need to look for among household items. Try to paint the spoons themselves with phosphorescent or ordinary acrylic paints.

Tulip lamp

To make a table lamp, you need disposable plastic spoons. Their number depends on the number of tulips. Each tulip requires 6 spoons to make. Work sequence:

Figure 4. For each tulip of such a lamp, you will need 6 plastic spoons, which are glued together in the form of a bud.

1. Handles are cut off spoons. For the manufacture of such a lamp, they are not needed, but may be needed for other crafts. 3 spoons are glued together to form bud petals. The remaining 3 petals are glued to them from above.
2. Buds glued from spoons are painted with aerosol paints from a spray can. The color can be chosen at the request of the master.
3. At the junction of the petals of the bud, a hole is made for the stem. It can be drilled or burned with a soldering iron, electric burner, hot metal rod. The functions of the stem are performed by a plastic tube for a cocktail. It is inserted into the prepared hole and glued with a glue gun. Leaves cut from a green plastic bottle can be glued to the stem.
4. An LED is inserted inside each tulip. If the buds of tulips are colored, then its color can be any. It is connected to the network through a resistor. If this is not done, it will heat up, which may cause a fire.
5. Ready flowers are collected in a bouquet and set in a suitable dish. It can serve as a transparent container, which can be filled with multi-colored balls of aqua soil. They will add additional beauty to a product created from spoons with your own hands. The lamp is ready (Fig. 4).

Creating unique designer crafts from end-of-life items is called the DIY movement.

From plastic tableware in the form of bottles, spoons, forks, you can make many different things that, with their unique appearance and newly acquired functions will delight residents of apartments and country houses. This is especially true for all kinds of lamps, which are able to create a unique beauty and comfort in the room. Try to build at your leisure to start the simplest chandelier. Good luck!