Stretch ceiling tools: what you need. What tool is needed for installing a stretch ceiling with your own hands What tools are needed for installing stretch ceilings

Montage stretch ceilings a lot of people are interested and most of them show their interest in terms of self installation such a device. But, as a rule, this desire remains unfulfilled and the reason for this is rather banal - stretch ceiling tools cost more than the work itself, therefore, it is much more profitable and safer to simply conclude an agreement with representatives of the company and entrust them with this matter.

Some still want to do this at a professional level, so for work you need to purchase a tool that will allow you to make such work a source of permanent income.

Tool set

Main tools:

1. heat gun,
2. perforator,
3. screwdriver

heat gun

Stretch ceiling tool - thermal gas gun Master

Since PVC fabric for stretch ceilings (with rare exceptions) needs to be heated to pull on baguettes, then some kind of device is needed for this and it is heat gun which can run on both gas and electricity. But for domestic use, propane-butane equipment is usually used, since it is difficult for a home electrical network to withstand such loads.

The thermal gas gun is a direct heating heat generator and can operate on natural or liquefied gas. The body of the heater is made of sheet steel, which, in turn, is coated with heat-resistant powder enamel.

A gas burner, an air fan and two grates made of stainless steel are fixed inside the cylindrical body. The purpose of the gratings is to prevent any foreign objects from getting inside the device.

The ignition of the gas in the installation comes from a piezoelectric element, and the fire quickly heats the air blown by the fan.

The heating of the room with an open fire occurs quickly enough, therefore it is very important that when the heat gun is operating, there is always a lot of air in front and behind free space. It will serve as a buffer zone for hot air. Otherwise, the fuse may melt, as a result of which the device will become unusable.

The gas supply to the burner is regulated by a special valve, so the degree of heating of the room can be fixed as needed.

Perforator and screwdriver

On my own perforator is by no means a secondary tool, but for the installation of stretch ceilings it can be replaced with a drill with a percussion function, although it is still better to use a perforator.

Since the biggest load on such a tool when installing stretch ceilings is drilling holes in brick or concrete, in this case a power of 750W is enough. And if you take, for example, Makita, then you will hold only 1700g in your hand, which is not at all difficult for a man.

Screwdriver Makita

The value of the tool lies in its weight and the ability of the battery to hold a charge. And if a set of two batteries is not enough without recharging for one working day, then you have chosen the wrong screwdriver.

Before you buy a screwdriver, ask how the batteries will behave after 5-6 months of continuous operation. Don't count on being able to buy new ones, as it's much cheaper to buy a good expensive screwdriver than to buy cheap batteries every year.

Advice! Pay attention to the functionality of a screwdriver - there should not be a function with impact rotation! Such a device will break the tool in a very short time.

Minor Instruments

Include:

1. choline,
2. water level,
3. roulette,
4. square,
5. hacksaw for metal.

Tools like choline for beating lines or a water level, you can purchase at any store that sells construction equipment and at the same time do not even pay attention to the country or the manufacturer.

water level

• I would like to say about the water level - plastic cones at the ends of the tube usually interfere with marking under the ceiling, so they are simply removed and guided by the hose.
• There is no point in talking about the rest of the inventory, that is, a tape measure, square or, say, a hacksaw, since even a tool for painting the ceiling deserves more attention.

Advice! If you decide to professionally engage in finishing work, installation tools should not be an object of cost savings. For example, Chinese heat guns are much cheaper, but incomplete combustion of gas occurs during operation, so a Chinese device uses more propane to heat up to a similar temperature than a European one. In addition, incomplete combustion releases carbon monoxide CO instead of the relatively harmless carbon dioxide CO 2 .

For a puncher and a screwdriver, it is preferable to choose Bosch or Makita, but again, not made in China. Such tools are more expensive, but they have a fairly long service life. But from personal experience we can say that with regular daily use of a branded tool, it lasts for about five years without overhaul and replacement of batteries (the quality of a screwdriver is determined, first of all, by the long-term suitability of the battery).

Tools for the installation of stretch ceilings are necessary for the installation of a fabric or film surface in the room. Many people are interested in DIY installation, but this process requires knowledge, some experience and a special tool for a stretch ceiling. The article offers to get acquainted with some of their types and ways of using them.

Features of the main and additional tools

The tool for installing stretch ceilings can be special, which is not used anywhere else, and general, which any installer can find.

The main list includes the following items:

These include:

• Drill for working with a perforator.
• Crowns are a working tool for a screwdriver.
• Drills for a drill.
• Pens for cutting ceramics and glass, if necessary.
• Plywood. It may be needed when mounting a chandelier or any other heavy lighting device. Instead of plywood, you can use hangers or drywall profiles.
• Sealant.
• Glue.
• Scotch.
• Stationery knife.

Tip: Whatever category the tool for mounting stretch ceilings belongs to, it should be purchased with high quality, from trusted manufacturers. In this case, you can’t save money, then the tools will last a long time, installation can be done efficiently, and it’s a pleasure to work with them.

Features and principle of operation of the heat gun

The PVC fabric used for the installation of stretch ceilings requires heating in order to stretch it over the baguettes. To do this, there is a special device called a heat gun. It can run on gas or electricity.

For domestic use, as a rule, propane-butane equipment is used, which is due to the inability of the home electrical network to withstand heavy loads.

A thermal gas gun is a direct heating heat generator that runs on liquefied or natural gas.

In him:

• The cylindrical body is made of sheet steel coated with a stable special powder enamel, resistant to heat.
• Fixed inside the case:

1. gas stove;
2. air fan;
3. grids, stainless steel - two pieces to prevent any foreign objects from entering the interior of the device.

From the piezoelectric element in the installation, gas ignites. The fire that appears begins to quickly heat the air blown by the fan.

Tip: An open fire heats up a room quickly enough. It is very important to ensure that when the device is in operation, there is always free space in front and behind, which will serve as a buffer zone for hot air. Failure to do so may blow the fuse, resulting in failure of the device.

A special valve regulates the gas supply to the burner, which allows, if necessary, to fix the degree of heating of the room. For professionals who are constantly involved in the repair of premises, stretch ceiling tools should only be of high quality.

For example, heat guns from a Chinese manufacturer cost much less, but during operation, the gas does not completely burn out in them, which requires more propane for heating than similar designs from European companies. In addition, incomplete combustion of the gas releases CO (carbon monoxide), instead of the relatively more harmless CO2 or carbon dioxide.

Perforator features

To install a stretch ceiling, this is an indispensable tool that is used to drill holes for dowels to install and fix baguettes. Although holes can be drilled with a drill in brick and wooden walls, in concrete without a perforator it will be very difficult to do.

When choosing a device for drilling holes in concrete or brick, you should pay attention to:

• The power of the device is at least 750 W, but it is better in the region of 1000.
• Dimensions and weight of the apparatus - remember that you will have to work under the ceiling.
• The presence of a dust removal system.

Quality and long-term operation can be guaranteed by units from branded manufacturers, which is important for professionals. For temporary use, you can use simple domestic or Chinese models.

Advice! Any, even a branded tool, needs regular revision and lubrication of the main moving parts, which will greatly increase its service life.

Screwdriver Features

• The use of a screwdriver facilitates the fastening of the baguette and brackets intended for installation lighting fixtures. You can also replace it with a screwdriver, but in this case, when screwing the screws through 5 or 6 fasteners, the hand will get tired, which will increase the duration of the installation work.
• The value of such a tool is its light weight and the ability of the battery to hold a charge for a long time. And when the kit is equipped with two batteries, you can work with a screwdriver without stopping.
• When purchasing a screwdriver, you need to ask the seller what type of batteries are installed, and what is their capacity and voltage (all this information is contained in the attached instructions). Here it is worth giving preference to Li-ion options, however, the cost of these batteries is high, which should be understood and taken into account immediately.
• The larger the capacity, the better. The longer you can work without recharging, which is also important when working at height

• Alkaline batteries are now the last century, although devices equipped with them are still commercially available. Like tool fit for those on a tight budget. We advise you to pay attention to the products of the Interskol company (the price for them is acceptable), which has established itself as a reliable and affordable solution.
• If there are no problems with money, or you want professional tool, capable of working day and night, then look towards the products of such giants as Makita, Bosch or even Hilti and the like.

If you have any questions related to the purchase of tools or their features, you can additionally watch the video. Only high-quality and properly selected fixtures and tools for the installation of a stretch ceiling will ensure the correct and fairly convenient repair of the premises.

Today, there are a large number of different brands on the tool market. There are both expensive and cheap brands, as well as an instrument of the middle price range. Each master has the right to decide for himself which one he can afford more, but not to make a choice saving on the quality of the final result. Nevertheless, a cheap tool belongs to the household class, and therefore is not designed for continuous loads. It will not give a big advantage in speed, and the end result of such work will not always be excellent.

When choosing a tool, we will focus on a certain standard team of stretch ceiling installers, consisting of two people. We will not affect Consumables: drills, drills, bits and fasteners.

Hand tool

Let's take a look at the hand tool first. We will need:

1. Hammer - 2 pcs
2. Hacksaw - 1pc
3. Roulette 5m - 1pc
4. Roulette 2m - 1pc
5. Construction trowel 10 cm - 2 pcs
6. Construction trowel 5cm - 1pc
7. Clothespins for hanging the ceiling - 4-6pcs
8. Screwdriver for terminal blocks - 2 pcs
9. Indicator screwdriver - 1 pc
10. Construction knife with blade 18mm
11. Caliper with jaws for internal measurements - 1 pc.
12. Key for 27 - 1pc
13. Small size pliers - 1 pc
14. Side cutters small size- 1 PC
15. Thin-nose pliers with rounded ends - 1 pc.
16. Control light - 1pc
17. Paint chopping cord
18. Metal shears

This is the basic minimum. hand tool, which is necessary for the installation of a stretch ceiling.

It is better to choose hammers weighing 400g with a fiberglass handle, Matrix hammers are quite suitable. Such a hammer will last 3-5 years, it has a durable and comfortable rubberized handle with a convenient weight distribution.

The hacksaw is the most ordinary, durable, but light in weight. For example, the Gross "PIRANHA" hacksaw. Very comfortable, reliable and durable. And yes, the price is quite reasonable.

Roulettes should be chosen more resistant to abrasion. You can pick up any tape measure of five meters, since this tape measure is used less frequently in work. And it is better to choose a two-meter roulette with hitchhiking, an extremely convenient feature.

We need screwdrivers for terminal blocks for electrical installation. Pliers, side cutters and thin nose pliers should be selected according to convenience and tactile sensations, individually for yourself.

A 27 wrench is needed to tighten the nut on the gas cylinder. In principle, any adjustable or gas wrench will do. But to neglect the presence of the key is not worth it.

A construction trowel, also known as a spatula, is designed for packing a stretch ceiling. With a 10 cm wide spatula, it is convenient and quick to pack the canvas, and a 5 cm wide spatula is more suitable for hard-to-reach places. Important: round off the corners on the new trowel with a file before use. It is optimal to choose a spatula as in the photo.

power tool

We will need:

1. Perforator 800w - 1pc
2. Cordless screwdriver min. 12V - 1pc
3. Wired screwdriver - 1 pc
4. Laser level - 1pc
5. Carrying extension with a block for 3 outlets 10m - 1pc

We will talk about the choice of power tools for stretch ceilings later in a separate article. We will need it for fixing the baguette of the stretch ceiling, as well as for installing platforms under the chandelier and lamps.

Gas equipment

The choice of gas equipment should be approached as responsibly as possible. There are only two items in this category:

1. gas heat gun
2. gas bottle

There is a wide variety of gas guns. They differ primarily in power: 15kW, 30kW, 45kW. When installing a stretch ceiling, a 30 kW gun is usually used; such a gas heater is perfect for ceilings up to 25 m 2. For ceilings over 25m2, heaters with a power of 45kW are intended. It is advisable to use small heaters in rooms with a small area: bathrooms and corridors.

It is desirable to use a gas cylinder with a volume of 27 liters. You can fill up to 18 liters of gas in such a cylinder. In general, the choice of a gas cylinder is a separate big topic. And safety precautions when working with gas equipment require the most thorough consideration.

Cases and ladders

Usually, to work in standard houses with a ceiling height of up to 3 meters, a ladder with a height of 5-6 steps is enough. We need 2 ladders per team. From experience: you should not take cheap aluminum ladders - they will not last long, literally 2-3 months of active work. It is better to turn your choice to the "blue" steel ladders from Alumet.

To carry all the tools that we need to install and install the stretch ceiling, we need a "tool box" or a special "construction bag". It's hard to recommend anything specific here. The choice is to come on your own. Someone is more comfortable with a bag - someone with a box. We also need a large organizer for small tools and consumables. All screwdrivers and rotary hammers come with their own cases, in most cases they are convenient.

In the process of work, this entire list will be supplemented and finalized by you yourself. He will grow many useful gadgets and additional tools. But everything that is presented above, all this is the minimum that should be in every installation team.

And may the quality work be with you!

The equipment used for is an integral part of good work and a quality guaranteed result.

Our masters use the safest gas equipment, which under no circumstances will lead to an explosive situation. This one is very important point, because in 90% of cases we install stretch ceilings in the residential sector. Our gas cylinders, hoses and burners do not explode, because are the safest in the world, we use only the most modern equipment.

The second important condition for the installation of our stretch ceilings is 100% dustlessness. Application industrial vacuum cleaners, and, most importantly, professional perforators with dust collectors, make it possible not to stain new, freshly glued wallpaper and even fabric wallpaper. It's no secret that according to the rules of repair, the walls are made first, then the ceiling, and at the end the floors. With our company, you can build your renovation in this way.

Our masters use special devices to detect hidden wiring in the walls. Thanks to this possibility, we will preserve the integrity of the low-current, electrical wiring and the safety of your home in the future. With high-quality installation of stretch ceilings, drilling a wall for guides is required after a certain distance and doing it "blindly" is simply not professional.

To attach the baguette (guides) for the canvas itself to the wall, our specialists use professional screwdrivers with automatic self-tapping feed and twisting force. Each screw must be tightened equally securely.

Many home craftsmen are interested in topics related to stretch ceilings, namely the possibility of their self-installation. However, it should be noted that for most ordinary craftsmen, the desire to do the installation of a stretch ceiling structure with their own hands is still not feasible. The reason for this is the relatively high cost of stretch ceiling tools. Their acquisition is much more expensive than the direct installation of the system.

Basic tools

For those who want to perform installation at a professional level and earn income from work, it is important to know what tool is needed for stretch ceilings.

To install such structures, you will need the following:

• Heat gun.
• Perforator.
• Screwdriver.

heat gun

One of the main processes during the installation of a stretch ceiling is the heating of the main fabric. In particular, we are talking about polyvinyl chloride fabric for stretch ceilings. To perform this type of work, craftsmen use heat guns. The operation of these devices is provided by the supply of gas or electricity. However, the home electrical network is not able to withstand such a too high load, therefore, in everyday life, a heat gun is most often used - a tool for installing stretch ceilings that runs on propane-butane gas.

If you describe a heat gas gun in simple words, then we can say that this is a direct heating heat generator, the operation of which is provided by natural or liquefied gas. For the manufacture of the cylindrical body of the device, sheet steel was used with a coating in the form of powder enamel, which is stable at a sufficiently high temperature.

A gas burner, a fan and special stainless steel grilles are built into the inside of the case. Lattices are a kind of barrier to unwanted objects that can get into the device during operation.

To ignite the gas burner, the device is equipped with a piezoelectric element. By means of a fan, air is forced into the housing, which in a short time is heated by the fire of a gas burner.

The air in the working room heats up very quickly, so to prevent melting individual elements heat gun, it is necessary to create a kind of buffer zone for heated air. For this reason, it is important to ensure free space in front and behind the device during operation. The gas supply can be regulated using a special valve, which allows you to control the degree of heating of the working area.

Perforator

The next important tool on the list of what you need for stretch ceilings is a perforator. With its help, holes are drilled in concrete or brick structures. It is recommended to purchase a device with a power of approximately 750 watts, since it is not expected to be heavily loaded.

If it is not possible to purchase a hammer drill, a drill with an impact function can be used. Although, it is worth noting that the performance and speed of the perforator is much higher.

screwdriver

With the help of such a tool for stretch ceilings as a screwdriver, a baguette and brackets for lighting devices are fixed. The advantage of such a tool is its light weight and the presence of a battery. High quality tools ensure trouble-free operation throughout the day, this can be called another advantage of a screwdriver.

When purchasing such tools for installing stretch ceiling structures, it is important to give preference to options with high cost and reliable batteries. This will allow you to get some savings, since a good device, even at a high price, will cost less than the annual purchase of batteries for it.

Another nuance that you should pay attention to when buying a screwdriver is the lack of a function with impact rotation. Devices in this case very quickly become unusable.

Auxiliary tools

In addition to the main set, you may need a secondary tool for installing stretch ceilings. In particular, we are talking about the following:

• Water level or chokeline for beating lines.
• Tape measure or other device for measuring room parameters.
• Square.
• Device for cutting metal.

You can purchase the listed tools, including the stretch ceiling clamp, at any hardware store, and there is no need to choose high-quality products or a trusted manufacturer.

When using a water level, there may be some inconvenience when placing labels in close proximity to the ceiling. That's why experienced craftsmen remove the plastic cones at the ends of the tube and guide the landmark directly along the hose.

As regards such simple tools, like a tape measure, a hacksaw and a tool for cutting metal products, there is no need to describe in detail and tell their principle of operation. They are known to the simplest home master.

Rules for choosing tools for installing a stretch ceiling

For execution finishing works at a professional level, you should purchase an expensive tool; it is not recommended to save on this expense item.

For example, the cost of Chinese heat guns is much lower than similar devices. European production. However, the gas does not burn completely during their operation, which leads to a greater consumption of propane to heat the room to a certain temperature. In addition, incomplete combustion of gas is accompanied by the release of carbon monoxide CO, while European devices are characterized by the release of harmless carbon dioxide CO 2 .

If we talk about a hammer drill or a screwdriver, then professionals prefer European-made Bosch tools. The cost of such goods is much higher, but the service life is quite long.

Thus, the equipment for mounting a stretch ceiling with a PVC main sheet can be called a rather serious and expensive set. Therefore, for a one-time use, it is not advisable to purchase it.