How to paint a rusty refrigerator. The choice of paint and tools for self-painting the refrigerator. What paint to paint the refrigerator at home

Surely many in the garden or in the country have old refrigerator, the appearance of which has not been pleasing to the eye for a long time. Sometimes people do not realize that it can be updated and it will fit perfectly into the interior.

If your refrigerator is still quite serviceable, but its appearance is depressing, feel free to take on the restoration. You yourself will be surprised at the result, and all that is required is your desire, minimal experience and a small financial investment. Why spend money on new equipment if you can make the old one designer?

The best options for painting the outside of the refrigerator

Not sure how you would like to see your refrigerator? Do not know how to draw and fantasize? It doesn’t matter, because today on the Internet it is easy to find many simple and unusual decisions. Everyone will choose among them what is suitable for his case and interior.

Video ideas:

Basic rules for quality painting

In order for the paint to lay down well and serve for a long time, it is necessary to choose it well and strictly observe the painting technology when working.

How to choose the right paint

Restoration requires paint and a minimum of tools. All that is needed is a narrow roller and brush, and in the case of using aerosol cans, even they are not needed. The selection of a coloring composition is a responsible matter, because it must not only perform a decorative function, but also protect equipment from various mechanical damage. Therefore, paints and varnishes are required that meet certain requirements: they are easily tinted, hold the paint vertically, and are resistant to detergents.

For this purpose, waterproof paint for metal, used for indoor work, is suitable. It can be polyurethane, acrylic, oil, automotive nitro enamel, zinc, silicone, epoxy, nitrocellulose or other paint. All of them differ in composition, but in this case it does not matter.

Coloring agents can be matte, glossy, luminescent, smooth or textured, differ in color, have different drying times, cost. The most budgetary, harmless and simple option is an acrylic paint for metal.

Staining steps

Before proceeding with the process of staining the technique, it is necessary to carry out some preparatory work so that the paint lays evenly and smoothly.

Preliminary work:

1. Disconnect the refrigerator from electricity.
2. Remove shelves and trays inside.
3. To clear an external surface of dirt and fat. This is easy to do with a hard sponge and grease remover.
4. To better hold the paint, remove the old coating with sandpaper, sand the chips and scratches.
5. Wipe off any dust with a damp cloth and then wipe dry.
6. Degrease the surface using special chemicals.
7. Apply a primer if necessary.
8. Protect your hardware with cling film, wide tape or masking tape.
9. Line the floor and other surfaces that may be stained with paint with newspaper or oilcloth.
10. Start by painting an inconspicuous area.

Coloring

Attention! When working for safety, it is necessary to use personal protective equipment. In this case, their role is played by a respirator and rubber gloves.

It is best to paint outdoors in warm and calm weather. If this is not possible, a bright, well-ventilated room will do. But in this case, it is better not to use car paint in cans, as it is the most toxic.

Staining rules:

1. It is necessary to apply the coloring composition in 2-3 layers.
2. After each layer, you need to take a break for 30 minutes so that it dries well.
3. When painting, it is more convenient to move the roller or brush from left to right or from top to bottom.
4. Hard-to-reach areas can be easily painted over with a small brush.
5. As a last layer, to give the surface a gloss or matte, you can use an aerosol acrylic varnish.

Aerosol painting technology

When painting with aerosol cans, they must be kept at a distance of 30 cm from the surface to be painted. At the same time, all movements should be carried out evenly and without stops, so that paint flows do not occur. If you need to remove minor paint defects, use solvents.

Creative dyeing and decoupage technologies

• Want to turn your old fridge into a whiteboard? It can be used to write down recipes, notes to relatives and demonstrate the original solution to guests.
• Kitchen appliances can be painted not in one color, but by adding multi-colored stripes or geometric figures. At the same time, it is convenient to use masking tape on the color transitions for a more accurate result.
• Painting or a ready-made stencil will also be a good solution. A stencil can be easily made with your own hands.
• Decoupage. Sometimes people don't want to mess around with staining and prefer to upgrade their fridge with plastic wrap. But this method requires good skill and experience in order for the film to lay flat and without bubbles. But there is an easier option - this is decoupage. Its technique is very simple and accessible even to a schoolboy. It requires almost no financial investments and takes a minimum of time. Decoupage is an application made of paper, which is varnished for practicality. For this, decoupage cards, paper multilayer napkins are suitable. You can also cut out a picture from magazines, draw it yourself or print it from the Internet using a color printer.

As you can see, the procedure for painting a refrigerator is simple and can be easily done at home on your own. It only takes time and your imagination. Gift your fridge new life and you will noticeably transform the old interior of your kitchen.

How to paint a refrigerator at home? Such a question later or sooner arises for many who have a properly working old unit.

While it won't look like brand new, the owner can drastically redesign it and cover up loose paint or cracks. The article offers to get acquainted with what paint you can paint the refrigerator.

To paint a refrigerator at home, you must first determine the purpose of painting.

It could be:

• Used unit refurbishment.
• Painting it in a different color that will blend in with the wallpaper.
• Make a designer refrigerator out of an ordinary refrigerator.

After determining the goal, the paint is also selected. To update the shabby corners of an old refrigerator, you can use spray paint, but a more reliable option is metal paint.

Tip: Although there are a large number of paints on the market that can be applied even on rust, you should first remove all old poorly adhering paint and degrease the entire surface.

What color to paint the refrigerator?

There is no single answer to it, you will need to choose from several options:

• To restore appearance, the refrigerator is painted with enamel paints, which are used at manufacturing plants for the initial coloring of products. It can be:

1. enamels in jars;
2. automotive paints produced in aerosol cans. Their price is much higher, which is due to the presence of components in the composition that ensure the resistance of the composition to atmospheric influences, which special significance does not have for home refrigerators.

Advantages of enamels:

1. high-quality adhesion;
2. durability;
3. beautiful glossy sheen.

The disadvantage of the coating is the rather high toxicity of solvents.

• Epoxy paints. These pigments in terms of their characteristics during operation are almost the same as those of enamels, but the technology of applying them to the surface is much more complicated. In addition, the cost of good quality epoxy is quite high.
• acrylic blends. This option is considered budget decision for painting the refrigerator. Their characteristics are inferior to epoxy compounds, but at the same time the margin of safety and durability of the coating is sufficient.

The advantage of acrylic is the presence of a wide range of palettes. This is especially in demand when deciding to give original decor refrigerator.

Before repainting the refrigerator, we must not forget about the use of restorative compounds. This is necessary if there is rust on the walls of the product, which will prevent the development of corrosion. In this case, materials that contain aluminum or zinc granules, such as Zinga conductive paint, help.

How to choose painting tools

After choosing the paint, you need to purchase the necessary tools.

It can be:

• Roller and brushes. In this case, the staining process will be longer, and the surface quality is somewhat worse. However, the use of a roller and brushes, when using a thin decor, allows you to do all the work more accurately, without getting paint on the walls and floor.
• Spray gun (see We select a spray gun for painting). It is good to use such a device if it is possible to move the unit to a free open large space, or to completely protect the existing environment and territory from pollution. As a result, when using the spray gun, the coating will be a thin, uniform layer.

Tip: Nitro paints are usually applied from a spray gun, and for small areas such a device should be replaced with an aerosol can and painted as shown in the photo.

Paints can be sprayed with a spray gun to protect metal from fire such as Polistil, but when restoring a refrigerator, their use is not always justified, it is better to use more suitable compositions.

• When planning color combinations, masking tape or plastic wrap should be used to separate areas.

Masking tape sticker on the surface of the refrigerator

Tip: Do not use regular sticky tape: the glue present on its surface leaves marks on the refrigerator, paint will not adhere well to them.

How to paint a refrigerator

Tip: Do not paint or touch the back of the unit, it can be very hot.

Before you start, you need to purchase:

• Paint previously selected.
• Rollers and pallets.
• regular ammonia.
• Rags.
• sponge.
• Adhesive tape.
• Special anti-rust agent.

Refrigerator painting instructions:

• Prepared:

1. old newspapers or plain paper;
2. protective mask;
3. gloves;
4. rags;
5. detergent;
6. dye;
7. roller, brush;
8. foam tube;
9. regular tape.

• The unit is switched off from the socket.
• All the devices included in it are drawn from it:

1. boxes;
2. egg cups and more.

• The refrigerator is thoroughly washed with detergents that dissolve grease.
• It is better to unscrew the handles and other parts that cannot be painted so that they do not get dirty, and the paint lays evenly in these places.
• Along the perimeter around the unit, newspapers or paper are laid out under the bottom of it, which will prevent soiling the floor surface.
• The level of the room where the refrigerator will be painted is leveled.
• The surface is being examined. If there are places with exposed rust, they must be cleaned to bare metal.
• Damage to the paint, chips, other defects in enamels, it is necessary to apply a primer from a spray can to such places.
• The places of transitions to the enamel are carefully cleaned. For this, very fine sandpaper is used to avoid visible transitions, and to evenly distribute the paint.
• The primer is given time to dry.
• If necessary, a second, third layer is applied, which will level the surface.
• Before starting work on an invisible section of the unit, it is checked right choice paint color selection.
• The refrigerator can be painted. Car paint from a can will lay down well and evenly, the surface will turn out smooth, resistant to abrasion. The paint is applied in a thin layer from a sufficient distance. Each layer should dry well. The whole process can be seen in detail in the video in this article.

It is better to paint the unit while standing. A beautiful pattern can be applied to the refrigerator panel.

To do this, an image is applied with a thin brush or a picture or motif you like is circled. If desired, the finished unit is covered with automotive varnish, which will allow it to shine and sparkle pleasantly in the sun.

Decor can be applied to the refrigerator. There are several ways to do this.

Vinyl stickers are pasted on the surface. They perfectly mask defects and can perfectly transform the interior of the entire kitchen.

A high-quality refrigerator without repair works for more than a decade. It is a pity to throw away a serviceable refrigerator, but it is very dissonant with the modern kitchen setting. Restoration will save, but first you need to choose paints, get acquainted with the technology of work, ensure safety for children and animals.

The industry offers compositions based on various film-forming substances. Not all of them are suitable for covering the outside of the refrigerator. Our task is to find suitable enamels - the most durable films.

The composition needs high adhesion - the paint must tightly grasp the base, otherwise the top layer will peel off with the first scratch. The film needs to be flexible, because the case is subject to thermal expansion. The painted surface is wiped with detergents, the composition must be resistant to aggressive liquids.

Choosing waterproof paint internal works for metal. These coatings include:

• two-component primer-enamel on galvanized metal;
• alkyd enamel;
• heat-resistant silicone enamel;
• nitrocellulose composition for metal and wood - automotive nitro enamel;
• acrylic matte enamel for metal surfaces;
• polyurethane or epoxy paint.

May be sprayed or applied by roller. What paint to paint the refrigerator, choose an exception.

We do not need paint on galvanized metal, there is no need to overpay for heat resistance - the refrigerator is located away from hot surfaces.

What paint to paint the refrigerator at home

The task of the master is to get a flat surface, akin to the factory one.

The layer should be opaque, lie down evenly, not flow down. Use the material in an aerosol can or use a roller or brush - it does not matter. The main thing is that the applied composition should dry out, not have smudges. Then the next layer is applied.

The choice of the color of the refrigerator outside depends on the overall design of the room. You can create an accent spot or create a surface in harmony with the facade. The main thing is to use a suitable coating and do the job carefully. Automotive paint is the most durable of all. Acrylic is water-based, odorless, the film is resistant to destruction. Epoxy composition is most durable under the influence of dampness. What paint to paint the refrigerator outside, you decide.

Application for painting refrigerator slate paint

Having studied the paint and varnish market, we found several compositions that masters advise using for work at home. Do you want to make the walls of the refrigerator a corner of creativity? Then for painting should use slate paint. The presence of composite particles in the composition will give the coating a slight roughness. The composition is created on a latex basis, the film is durable. On a dark, matte surface, you can draw with chalk. Drawings are washed off with soap and water. As an independent, dark shade coating, it looks stylish.

The Finnish manufacturer Tikkurila is considered the best manufacturer of such compounds. Under this brand, you can buy Liitu black paint. Sibiria is a domestic brand of slate, magnetic and marker compositions. Some of them have antiseptic properties.

Features of painting an old refrigerator

Need a black refrigerator - buy a jar of Sibiria PRO or MagPaint from Holland.

Is it possible to paint the refrigerator with paint for batteries

What is the difference between batteries and a refrigerator? Only because they experience seasonal heating. That is, the film must be elastic, withstand thermal expansion, adhere tightly to the metal, be neutral to detergents and resistant to abrasion. The same requirements for the composition for refrigerators. Is it possible to paint a refrigerator and a battery with the same paint, creating a kitchen design? Which one to choose?

You need to find a product that does not change color under the influence of temperature, with good hiding power and a decorative effect. It is better if the paint is odorless. We suggest choosing:

• alkyd enamel based on organic solvents has a white base element, the coloring pigment is added additionally, the smell is strong before drying;
• water-based acrylic enamel is odorless, only titanium dioxide paint is used, for refrigerator inside and outside;
• organosilicon alkyd enamel, which contains special pigments that hide defects in uneven painting.

It is very important that all these compositions do not lose color over time, they can be decorated with a pearlescent additive.

Is it possible to paint the refrigerator compartment

If the refrigerator chamber was enameled, rust inevitably appeared at the joints of the panels and in the cracks, no cleaning will save you from yellow streaks. Inner surface almost no ventilation, the air in the chamber is humid, it is difficult to choose a coloring composition. The smell of paint from the refrigerator is removed for a long time. Special absorbers are used activated carbon and selikogel.

Only water-based acrylate can be used. But before that, you need to remove rust, apply a special converter, degrease and prime the surface. It is almost impossible to remove the smell and harm from other paints from the refrigerator.

It often happens that a well-functioning refrigerator has healed, the situation has been changed, and it still works fine, but has an unsightly lining. How to paint a refrigerator using latest coatings, at home? We use the experience, advice and video of the masters.

Refrigerator painting at home

We will start with the fact that the refrigerator has already been emptied of the contents and everything that is not painted has been unscrewed or covered with adhesive tape. The refrigerator body must be installed on a multi-layer newspaper flooring around the perimeter and under the bottom.

Before painting the refrigerator, the surface should be washed, cleaned of rust and degreased. Rusty places can be treated with a reducing agent. If there are chips, peeling, cracks, the places are cleaned with a smooth transition to enamel and treated with a primer. Each layer is dried, according to the instructions, processed with fine sandpaper, the surface of the refrigerator is brought to a perfectly even state before painting.

Determine the purpose of painting:

• renew the surface, leaving the same color;
• paint in a different color, in harmony with the wallpaper or radiator;
• create a design cover.

How can you paint a refrigerator at home? One obstacle - can not be used powder paint- it needs to be baked in a special cabinet, there is no such possibility.

Automotive enamel is used to create a smooth, uniform surface. It's easy to paint a refrigerator with an aerosol can. In addition to the high price, the paint is toxic, intensive ventilation is required. Fine spray impregnates the dust, settles on the floor. It is important to choose the right place where to paint the surface of the refrigerator. But the coating will turn out to be resistant, not fading.

Epoxy paints can be used, but they are more difficult to apply and require skill. The coating will turn out to be resistant to detergents, glossy.

Water-based acrylic paints have a bright range, form a resistant film, and are non-toxic. You can use a roller or brush to apply paint. You can smear in one place no more than 2 times, otherwise the film will be on the brush. After the layer dries, apply a second one.

How to paint a refrigerator at home, watch the video.

Do-it-yourself refrigerator painting

The refrigerator has already been prepared for painting at home, cleaned of old defects, primed and sanded. Paints, than to paint the old refrigerator outside, are selected. It will not be superfluous to stock up on old rags for wiping droplets and hands.

How to paint a refrigerator at home with your own hands?

The place of work is prepared.

Before you start painting the refrigerator at home, you need to protect yourself, flowers, animals and loved ones from inhaling harmful odors. Protective clothing, respirators and several pairs of gloves will save your skin and Airways. Is it possible to take the device to the balcony? Required if aerosol is used. Dust settles on all surfaces, it is difficult to wash it.

Using paints under a brush or roller, apply a thin layer. First, check how the composition lies somewhere in an inconspicuous place. The paint must be opaque and not run down a vertical surface. Each next layer is applied after the previous one has dried.

How to paint the outside of the refrigerator

Manufacturers offer several types of metal paints that can be used to paint the refrigerator. But are they all right for you? You may not be able to tolerate fast drying solvents. Then you can't use car paints and epoxy compounds. Rubber paints - this is what the people call acrylic compositions for a durable thin film, they are odorless. Based on an aqueous solvent, they are initially produced only white color- there will be something to paint on the old enamel inside the refrigerator. For getting desired color powder is dissolved in the primary composition, stirred until a uniform color.

You already know how to paint the prepared surface with your own hands if you primed the surface yourself. In the same way, paint is applied. Sanded after drying and re-applied until a uniform glossy surface is obtained.

There is a lot of training material at your service, look at the photo on how to paint a refrigerator at home. The white stripes are adhesive masking tape.

Is it possible to paint the refrigerator in a different color

Most often, refrigerators are pasted over with a film to change the color. But the old "pot-bellied" refrigerators with rounded shapes cannot be exactly pasted over. Can you paint it yourself in a different color? As in the case of restoring the previous color, you first need to strip and primer. Changing the color of the refrigerator is easy. It is necessary to apply the paint in a very thin layer with a roller, so that the old surface first shines through. Each time, the layer must dry. And so at least 5 times. At the end, gloss should be applied. In this case, the use of a spray will give a good result.

Is it possible to paint the refrigerator with slate paint

The new range of inks is referred to as slate and magnetic types. The magnetic base contains iron in its composition, has the properties of attracting. Magnets stick to the surface.

Slate paint creates a surface on which you can write with chalk. Durable latex-based film slightly rough from used fillers. Therefore, the chalk drawing lies flat. You can wash it off with plain soap and water. For a refrigerator, a pattern can become part of the decor. But most importantly, the color of the coating depends on the filler. Matte paint lays down beautifully, looks decent.

The old refrigerator will be transformed, will find a second life, if you paint it with slate paint. It is not difficult to do this, the spray or canned composition is applied to the primed surface, like ordinary paints. You can find gray, golden, copper shades, but more often they sell black and dark green. The surface would be nice to decorate with decor, there are many options.

Video

We offer you to watch a video on how to properly paint and restore an old refrigerator.

If your refrigerator does its job perfectly, but already looks shabby and does not fit into the interior of the kitchen at all, it can be updated. Often it is the appearance of the device, or rather its damage, that is the main reason for the replacement. Old refrigerators are not thrown away, but sold or used in the country. Accordingly, having updated the color, you can not spend money on the purchase of expensive equipment, if the rest suits you.

Either self-adhesive film or paint is suitable for this purpose. The first option is difficult to implement, because it is difficult to paste over the surface of the refrigerator evenly and without wrinkles. In addition, the film is easy to scratch, it quickly fades under the influence of sun rays shining through the window. It is much easier to evenly repaint the refrigerator, and by choosing absolutely any color, and perhaps even create a pattern!

And now about everything in order, let's figure out how to paint a refrigerator at home, what kind of paint is suitable for this and what sequence of actions should be followed in order to cope on your own, without involving specialists.

Painting a refrigerator at home involves the use of special paint and tools. The surface of the technique cannot be attributed to simple or ordinary, respectively, not every coloring matter can be used. High demands are placed on the paint layer:

1. It must protect the facade from mechanical damage that occurs during operation.
2. It should give an updated look and diversify the interior.

Also, the paint should not “peel off” after a few months, that is, it must have high performance.

When choosing materials, consider the features of the use of the device. If the refrigerator is always in a dry and heated room, that is, in the kitchen, rust does not threaten. Another question is if the refrigerator is placed in a damp room, for example, in workshops or warehouses and other industrial areas with high humidity. In this case, it will be necessary to treat the surface with an anti-corrosion solution. For home use, such a solution would be inappropriate, as well as a fire base or paint, because a refrigerator near a fire, in principle, cannot be connected.

In this case, a paint that can be mixed with other colors, held on a vertical surface, elastic in structure and resistant to detergents is preferred. Thus, to paint the refrigerator, you need a paint for metal for interior work that is resistant to water.

There are several types of such paints, and the following types are ideal:

• nitro enamel for painting cars - this type is well applied, has a high resistance, has a beautiful shiny shade. Paint is sold in aerosol cans, so application will not cause difficulties. Among the shortcomings, one can single out the high cost, toxicity (it should be used with open windows and in a respirator), the inability to control splashes. To organize the process, you will have to close walls, floors and furniture in order to exclude subsequent cleaning;
• acrylic paint for metal - application is carried out with a roller or brush, it is distinguished by a variety of colors. The composition is characterized by safety, since it does not contain toxic substances;
• polyurethane paint - of all types is more resistant to wear. Moreover, it can be used both for the external surface of the refrigerator, and for the internal one. It is not afraid of low temperatures, it is easy to apply, therefore, in cases where scratches need to be painted over, they use it.

What tool will you need

It is impossible to start painting immediately, the surface must always be prepared in advance. The refrigerator is located in the kitchen, where food is constantly prepared, so any hostess has traces of fat covered with dust on its surface. These may be tiny specks, but they are there. That is why, before starting work, it is necessary to wash the surface well so that the paint lies evenly and easily, eliminating cracks and chips in the future.

To organize work, including preliminary preparation and further painting, you will need the following tools and materials:

• detergent to remove contaminants;
• abrasive sponge;
• rags (dry and wet);
• sandpaper fine-grained paper;
• acetone or kerosene for degreasing;
• primer (for better bonding of the paint layer and the surface of the equipment);
• masking tape, film, adhesive tape;
• newspapers to cover the floors;
• respirator;
• gloves;
• dye;
• brush and roller.

After collecting the materials, you can get to work.

Preparation process

As already mentioned, painting in a different color should be carried out with the preparation of the surface of the refrigerator. Therefore, follow the proposed scheme of actions:

• for safety reasons, disconnect the equipment from the power supply, also remove the internal shelves and partitions, especially if you will also paint inside;
• by using detergents and an abrasive sponge clean the surface well and rinse off the applied solution. Just cleaning the refrigerator is not enough, you also need to thoroughly wash off the chemical compounds;
• Sand the surface with sandpaper, partially removing the old coating. Rub most carefully in places where there are already cracks and chips - here the old layer of paint is already gradually moving away, so it is necessary to remove it so that in the future it does not cause damage to the new coating;
• wipe the refrigerator first with rags soaked in water, then dry. So you remove the particles old paint, which also should not remain on the surface;
• treat the refrigerator with a primer;
• seal the handles and other accessories with tape or wrap with a film. Masking tape can cover the elastic on the door and other parts that should not be painted. Also, if you're going to stick with a geometric pattern, then masking tape is perfect for that;
• cover the floors with newspapers and, if necessary, the walls;
• Test the paint on a small area of ​​the refrigerator. Evaluate if the color matches, how the paint lays down, etc.

Painting process

Having completed the preparatory work, the most important thing remains, to paint the old refrigerator. If you have chosen paint cans for this purpose, you must follow the instructions for it. General recommendations on the use of this type of paint:

• when applying, hold the balloon at a distance of 30 cm from the surface to be painted;
• movements should be uniform, from left to right, not lingering for a long time at one point, otherwise this place will be noticeable later;
• paint in 2-3 layers, but each of them must dry, and only then the next one is applied.

If your choice fell on paint in a jar, then you will need a brush or roller. Sharp color transitions either at the bottom or at the top will lead to an ugly result. Move steadily from left to right. Painting is done in 2-3 layers, each of which must also dry.

As you can see, there is nothing difficult in updating the appearance of a working refrigerator with your own hands; even a person who does not have the proper experience will cope with this task. The main thing is to follow the recommendations on the choice of materials and the sequence of actions, and then the result will please for many years!

Sooner or later appearance household appliances deteriorates, and we have to figure out how to paint the refrigerator at home. Of course, it will not look like new, but we will be able to radically change its design.

This opportunity should not be missed, therefore below we will describe the key stages in the process of restoring the appearance of the refrigerator.

Tools and materials

Paint selection

The first, and most relevant question - what paint can be used to paint the refrigerator?

Of course, there is no single correct answer to it, therefore, you will have to choose from several options:

• Initially, refrigerators are painted with enamel paints, and therefore it is quite logical to use them to restore the appearance. Moreover, for work you can use both enamels in jars and car paints in aerosol cans.
• Enamels have quite a few advantages: high-quality adhesion, durability, and pleasant. As for the disadvantages, they are associated with a fairly high toxicity of solvents.

Note!
Car enamels usually contain components that provide resistance to weathering.
For our purpose, these substances do not play a special role, so it is not worth overpaying for ultra-resistant paint.

• Epoxy paints. According to their performance characteristics, these pigments are almost identical to enamels, but the process of applying them is more complicated. In addition, the price of a quality epoxy composition is quite high.
• Acrylic mixes. Since a fairly small amount of paint is needed for our purpose, choosing acrylic can be considered a budget solution. According to their characteristics, acrylic pigments are inferior to enamels, but for the operation of a refrigerator at home, their margin of safety and durability is quite sufficient.

Note!
Another plus of acrylic is a wide palette.
If you are planning to implement original decor, the issue of choosing a color can become quite acute, so acrylic is a good solution.

• When choosing which paint to paint the refrigerator, do not forget about restorative compounds. If the walls of the product are touched by rust, Zinga conductive paint or other materials containing zinc or aluminum granules will help prevent corrosion.

What will we paint?

Each option has both pros and cons:

• longer, and the surface quality may be somewhat worse.
• On the other hand, using a roller and brushes for subtle decorations will allow us to do the job more accurately, avoiding paint on the floor and walls.
• it is desirable if it is possible either to take the refrigerator to a sufficiently large open space, or to completely protect the environment from pollution. The result of using the spray gun is a thin-layer uniform coating.
• Even with the help of a spray gun, nitro paints are usually applied, but for small areas it can be replaced with an aerosol can.

Note!
Fire-retardant paints for metal Polistil and other similar products can also be sprayed with a spray gun.
True, using them to restore the refrigerator cannot be called justified, so it is better to use more suitable compounds.

• If you plan to combine colors, then you need to use plastic wrap and masking tape to separate the sections. You should not use ordinary adhesive tape: the glue leaves traces on which the paint then does not adhere well.

staining technique

Object preparation

Before repainting the refrigerator, it must be carefully prepared.

It is done like this:

• We turn off the device and transfer it to where the painting will be performed. Naturally, all products from the chambers must be removed!
• We remove all fittings, and if this is not provided for by the design, we close those parts that do not need to be painted with masking tape.
• Thoroughly wash the surface of the refrigerator using an anti-grease product. After washing, dry the device.

• Rusty areas and the place where the paint peels off the base, clean and grind. If necessary, we carry out alignment with a quick-hardening putty.
• We process the refrigerator with a degreaser.

When the degreased surface is completely dry, you can start painting.

Refrigerator decoration

Painting instructions include the following items:

• Before starting work, we protect the floor and walls from drops by laying newspapers and laying polyethylene.
• We stick adhesive tape on the degreased surface, denoting the boundaries between the painted areas.
• We spray the paint from a can or a spray gun in an even layer from a distance of about 30 cm. We move the nozzle from top to bottom so that there are no streaks left.
• If a roller is used, then we collect a small amount of paint on it and move with vertical strokes.

Advice!
To find out how the paint will lay down, we start processing from the area that will be facing the wall.

• After processing, dry the paint. The time depends on the composition: from a few minutes for nitro paints to two to three hours for acrylic paints.
• We carefully examine the painted surfaces. If necessary, we carry out re-painting, eliminating all defects.

As for the decor, it can be applied in several ways:

• The most common technology is surface finishing with vinyl stickers. They perfectly mask defects and can radically change the look of the entire kitchen.

• You can also paint the front side of the refrigerator with acrylic paints. True, in order to protect the drawing, it will need to be varnished.

Conclusion

Recommendations on how to paint the refrigerator with your own hands should be followed as accurately as possible, otherwise the applied paint will begin to peel off quite quickly and the work will have to be repeated. The video in this article will help you master the restoration technology, so we advise you to carefully study it before starting painting.