Aluminum heating radiators rating by category and manufacturers. Reviews of heating radiators: what is the better than what company heating radiators is better to put

The radiator is an important component of the heating system of any room that performs to the same aesthetic function. A properly chosen radiator model will perfectly fit into the interior of the room and can become an element of design. However, for considerations of technical characteristics, it is not necessary to rely only on how aluminum heating radiators look like. What better to choose, decide, of course, you. An excellent acquisition will be a radiator with high operational qualities and beautiful in appearance. The main task of any radiator is to approach your heating system, to provide maximum heat transfer and adjust the temperature indicators indoors.

Selection of heating radiator for apartment

What model of heating radiator prefer to install in the apartment? This question is asked by many residents of multi-storey houses. Get a clear answer to this, it would seem, a simple question is almost impossible. Neither in the World Wide Web, nor in a specialized store of objective information is difficult to achieve. Each praises one or another radiator model. Moreover, models, like manufacturers of radiators, imported, and domestic, every year becomes more and more.

Our article will give you a number of recommendations to deal with the manifold of heating systems on modern market, Choose the desired dimensions of aluminum heating radiators and choose the model that is perfectly suitable for your parameters and perfectly fit into the interior of your housing.

Indoor radiators for the water heating system by manufacturing material are:

• cast-iron;
• bimetallic;
• steel;
• aluminum heating radiators.

What better? Suppose cast iron radiators are still produced, but the demand for them is steadily falling until it disappears at all. Wine all the huge weight and unimportant heat transfer of such radiators that make them non-competitive among modern models. And even the magnificent corrosion resistance of the cast iron does not save their positions.

Therefore, we consider more than 3 main types of modern heating radiators.

Bimetallic heating sections

These new generation radiators designed for pressure in 30 atmospheres, combined the best quality of heating aluminum sections and steel heating instruments of tubular type. The outer coating and ribs of such a radiator are made of aluminum alloy, and the inner pipe part is steel.

The undeniable advantages of bimetallic heating sections:

Withstand without loss of their initial qualities pressure in the system up to 40 atmospheres;

Long service life - up to 20 years, due to the counteraction became the chemical component of water in the coolant;

High heat transfer;

Modern stylish design.

High cost of bimetallic sectional radiators (almost a third higher than that of conventional aluminum);

Increased energy consumption due to high hydrosistration in sections of such a radiator.

In accordance with the foregoing, the conclusion is suggested: the main advantage of bimetallic sections is to actively oppose the aggressive properties of the local coolant and withstand high pressure in the heating system. For the sake of justice, it should be noted that today the average pressure in heating pipes does not exceed 15 atmospheres, and modern purification and preparation of water fill in the system significantly reduces the possibility of corrosion and gluing the elements of the heating system. Therefore, deciding to purchase a sectional radiator from Bimetal, you are essentially overpaying for fashionable material and brand.

Steel panel type radiators

Panel radiators with a working pressure of 10 atmospheres are two steel plates connected by a welding method, with recesses for connecting channels and collectors. Sizes of steel panel type radiators fixed. The possibility of adding or unbalanced sections, like in a sectional type radiators, they do not have.

The large size of the panel radiator guarantees heat transfer at a high level, the presence between the fins panels total will increase the heat efficiency of the radiator, due to the increased heating area.

Lack of inertia;

Economy;

High heat transfer;

Great heated area.

Disadvantages:

High pressure prettier in the centralized heating system;

Susceptibility to aggressive properties of the coolant, especially the presence of oxygen.

Most often, steel panel radiators are used in closed autonomous heating systems. Install the panel radiator into the centralized heating system is irrational.

Aluminum heating radiators

What are the better all the same heating systems? Aluminum heating radiators, suitable under pressure in 16 atmospheres, are an elegant heating device with a low weight and high level of heat transfer (maximum heat transfer in one section - 198 W). Such high heat transfer rates are due to the double action of the aluminum radiator. Half heat This device transmits radiation, and the second half of the convection.

The presence within the fins of the fins increases the heated area to 0.5 sq.m., thereby increasing its coefficient of heat transfer.

Aluminum heating sections are most effective for heating closed premises of any area. The dimensions of aluminum heating radiators are small, so these wonderful devices do not require much water and perfectly adjust the heat flux.

Pluses of heating sections from aluminum:

Optimal price-quality ratio;

High heat transfer;

Stylish design;

Low weight;

Perfect working pressure.

Frequent metal corrosion with aggressive, poorly purified heat carrier in central heating systems.

To date, the best aluminum heating radiators enjoy the greatest demand in consumers. This is due to the price, are affordable, reliable in quality, durable in operation and effective in work. You can use them in any residential and non-residential premises.

Combined copper-aluminum radiators

Combined radiators made of copper alloy and aluminum use in premises with excessive humidity, for example in pools. The exceptions are only those rooms in which the likelihood of a chemical reaction that reaches the reaction with materials from which such a radiator is manufactured and the quality changes. Such a radiator is made of the thermal conductivity (for reference: the thermal conductivity coefficient of copper - 410 W / m2k, and aluminum is 220 W / m2k). The design is designed so that water from the heating system comes into contact exclusively with copper, and the body and thermal conductivity plates are made of aluminum.

Heating radiators Copper-aluminum are used exclusively in autonomous heating systems. Because for the durability of these devices, it is necessary that the entire heating system, including the heat exchanger in the heating boiler, the pipes, and the radiator itself, was made of one of the least susceptible corrosion of the material.

Aluminum or which prefer

This question will cause difficulty at a highly qualified installation of heating. Definitely the use of bimetallic sections is recommended in the apartments of high-rise houses and in heating networks with poor water purification. Wrouders of autonomous heating, as well as residents of apartments of ordinary five-story buildings, due to the usual pressure in the heating pipeline, it is not worth overpaying for such heating devices.

And an important warning for those who have already made a choice in favor of bimetallic heating sections - over 80% of such radiators presented in the domestic market are manufactured in China. That is, the quality of the metal from which such a device is made, as well as the quality of work in its manufacture, correspond to the reputation of the manufacturer.

Calculation of power of the selected radiator model

The power rate of one heating unit of the device for the Russian Federation, according to the reference book:

Northern RF - from 150 to 200 W / sq. M.

The middle part of the Russian Federation is 100 W / sq. M.

Aluminum radiators, depending on their model and manufacturer, on average have a power of 82-212 W / sq. M. Consequently, for heating a room of 10 meters in the central part of the Russian Federation, the radiator consisting of 9-10 sections with a power of one in 100 W / sq. M. or consisting of 5 sections with a power of 200 W / sq. M. Each.

Performing the calculation of aluminum radiators of heating, it is important to consider that excess heat is preferable to its disadvantage. Indeed, in Central Russia there are winter with Lyuti frosts. By installing the internal heating system, aluminum sections in radiators put with a margin.

Installation of heating radiators from aluminum

To serve new batteries for a long time and efficiently provided your home with warmth, the connection of aluminum heating radiators should be made, adhering to a number of special conditions.

• Aluminum is well opposed to corrosion, however, in the composition with a copper alloy in a heat carrier, in a short time, it is confused by its initial qualities.
• Improper installation of aluminum radiators, especially touching nipple screwing, leads to annoying troubles during operation.
• Aluminum refers to a number of soft metals. Therefore, the section of such a radiator can easily be damaged during mechanical shock.

In the modern market for heating products, aluminum radiators of various domestic and imported producers are presented, which are designed specifically for the heating systems of the Russian Federation. The developers of these models learned and high pressure in systems, and the high acidity of the coolant, and tried to adapt their products to this. The price of an aluminum radiator depends on the quality of manufacture and manufacturer.

Installation of aluminum heating radiators:

1. Place the place to which the radiator will be installed.

2. Attach the brackets of the radiator mounting brackets.

3. Hang the radiator to the brackets.

4. Connect the radiator to the heat pipe.

5. Install the plug or special valve.

Chinese-made radiators

To date, China has licenses for the release of heating aluminum radiators of some well-known manufacturers. Those who do not want or cannot overpay for the famous brand may well stop their choice on Chinese-made models. Manufacturers of aluminum heating radiators from China often supply high-quality goods to the Russian market at a relatively small cost, thanks to their cheap labor.

Chinese-made heating radiators should be purchased in specialized stores that will value the reputation and clientele. By purchasing such heating devices on the market or in the online store, there is a risk of a poor-quality model or inappropriate declared specifications. And besides this, Chinese radiators models have their own indicators that need to be considered by choosing a model.

Radiators of Italian production

The most popular models presented in the domestic market are Italian aluminum heating radiators.

These products have a stylish design, perfectly suitable for any interior, and are used as heating devices in residential and non-residential premises. Italian radiators are covered with special enamel radiators, which can withstand high heat carrier temperatures and adds metal strength.

The heating sections are made from high-quality aluminum alloy with high strength, which does not harm constant contact with technical water and impurities.

Selection of the manufacturer of heating radiators

We collected a small list of well-known companies producing heating radiators aluminum. Firms are all worthy of your attention. However, what radiator will be optimal for installation in your room, you decide to you, focusing on your budget and type of heating system.

Global (Global)

Italian company for the production of high-quality aluminum radiators. The heating devices of this company are distinguished by their long exploitation and stylish appearance, and the materials used in their manufacture are reliably protected them from rust and mechanical damage. The cost of one section of the aluminum radiator of this company is about 400 rubles. The price corresponds to the quality.

SMART (Smart)

The Chinese company produces inexpensive bimetallic heating sections and universal aluminum heating radiators. What better to purchase, decide for yourself, the cost of one aluminum section is about 300 rubles., Bimetallic - about 350 rubles.

Rifar (Riffar)

Domestic company for the production of bimetallic and aluminum heating sections. Such radiators are 100% suitable for Russian operating conditions, at a price much lower than the imported manufacturers offer. Depending on the selected model, one section of heating from Rifar costs from 450 to 900 rubles. These are high-quality heating radiators at a low price.

How to choose the radiators of heating from aluminum

Aluminum batteries appeared not so long ago, but actively replace the positions of the cast iron batteries. Analysis of the characteristics of aluminum radiators does not allow to doubt their high quality. But you need to not forget about some negative sides of these radiators. Therefore, you need to know how to choose aluminum heating radiators. The article will answer right now.

Why aluminum radiator?

Aluminum is characterized by such characteristics as good heat transfer, ease, convenience in the manufacture of batteries. This is an excellent choice for the design of the batteries. Aluminum batteries have many advantages: small-sized, good level of heat transfer, easy installation, fast heating of rooms, attractive design, resistance to rusting processes, convector heating.

Usually, the manufacturer offers aluminum heating radiators painted in white colorBut if you wish, they can be covered by any paint that can withstand high temperatures. You can also additionally get scenery in the form of gratings.

When buying aluminum batteries, you need to take into account their some minuses. They are very sensitive to hydrowood and poor-quality heat carrier. To protect them, it is worth using a special coating that is applied to the inner side of the radiators. Those who have an individual heating system can be calm, their aluminum heating radiators will be more resistant to malfunctions.

Also worth paying attention to the connection of installations with steel or copper pipes. Since their compound with aluminum causes metal corrosion. In order to avoid such confusion when installing, special nozzles from metals should be used, which are not included in the reaction with aluminum.

What aluminum radiators are better.

Aluminum batteries are made in two ways. They can be extruded or licensed. With an extruded method, the heating radiators from aluminum are made by extrusion of metal alloy, and the top and bottom of the battery are manufactured under pressure. The limited convectors are fully manufactured under pressure.

The procedure for manufacturing batteries is as follows: elements are combined under pressure in a special apparatus; Next to the section with a certain mass, an alloy is poured out, which passes through the distributor and falls through the piston into the form, there the metal is frozen, and after it gets into the cooling stage. After that are attached required detailsNo passability is checked, then the device is in shape with a liquid against corrosion, to protect the inner side of the battery, then the design is dried and cooled, paint special paint and, finally, parts are collected in a single whole and check again.

Methods of making aluminum batteries in all firms are different. They depend on their internal studies and permits that companies are owned. But despite this, the general main characteristics are the same and complied with all manufacturers. In the manufacture of compartments can use aluminum both primary and secondary. However, the primary metal products are distinguished by their strength.

Manufacturers in Europe preferably use the injection molding method, as it gives the installation better strength. Despite the fact that extruded radiators have greater strength, they break more often. Problems are mainly happening where the elements are associated.

Italian company uses a hybrid method of manufacture. There are several battery segments from blocks at once. They are after connected by blocks using a welding machine. This requires clamps of steel and seals. It allows you to control the size of the battery, depending on the heating. Speaking about the Faral Trio HP radiator, it is safe to call it innovative.

It perfectly tolerates large pressure drops, and also has greater heat transfer. The manufacturer for the production of such batteries uses a special alloy from aluminum, and in order to ensure the waterfront uses round knives.

Important! Following standards, the maximum possible pressure of the aluminum battery should be 3 times large than the pressure of the heating system. That is, if the manufacturer says that the pressure of the product is equal to 16 atm, then the pressure on the gap, therefore, from 48 atm. Often at cast batteries, this mark is 45 atm. Also before installing the battery, it must be correctly formed.

Aluminum batteries and boilers, which has a heat exchanger from copper.

Many experts suggest that you should not put aluminum radiators where the boiler with a copper heat exchanger is installed. And there is some truth in this, because such metals as copper and aluminum are not combined. If you combine these two alloy with each other, soon copper will begin to attract aluminum particles and the battery will soon fail.

However, it is difficult to assume the real contact of the aluminum radiator with the copper part of the boiler. In order to combine them use tubes from polypropylene. And since aluminum and copper cannot interact, then the destruction is absolutely impossible. The duration of the operation of the battery does not depend on what metal the remaining elements of the heating system are made.

How many sections of the aluminum radiator

The required number of compartments.

It is customary to say that one segment aluminum battery radiators is enough to heat the area up to 2 square meters. But in really not always so it turns out. After all, there are also other aspects, for example, location, level of cooling of walls, from which material, and many others are made from what material. To significant parameters of aluminum batteries concern: pressure and heat transfer level. The heat transfer indicates the size of the heat that can be obtained during the operation of one battery segment. This digit is compared with the working temperature of the heating system.

What are the heating radiators bimetallic or aluminum better?

What are the heating radiators bimetallic or aluminum better? Aluminum heating radiators How to choose them correctly, do you know? More likely no than yes. But if you still want to put in your home

Heating Battery Rating for Apartments: Choose the best manufacturers

Today, in the Russian market climate machinery A huge range of heating devices is presented. But how not to be confused in such a variety and how to correctly choose the heating batteries for the apartment, because each model has its advantages and disadvantages? Determine best radiators To work in a specific heating system and answer the question of which heating batteries are better for the apartment, you will help the rating compiled by experts based on the comparison of the technical characteristics of the instruments, taking into account all the disadvantages of autonomous and central heating.

Criterias of choice

Despite the popularity of autonomous heating systems (CO), most residential and economic premises in apartment houses It is heated with the help of central heat supply. When choosing batteries for installation in an apartment, you should be aware of the main disadvantages of centralized heating.

1. The coolant may contain chemicals in its composition that provoke corrosion of some materials. In other words : It is necessary to choose radiators, made (or coated from the inside) from the material resistant to corrosion.
2. The coolant contains a large amount of solid particles, which with time can lead to premature wear of the batteries. Choose radiators from wear-resistant material.
3. The temperature of the coolant in centralized CO is not the same. Pay attention to the devices with the highest heat transfer in the maximum temperature range.

In addition to the above: for any centralized heating system, the characteristic problem is frequent pressure drops. We should not forget how much the radiators are for the heating of the apartment. The price difference is colossal and depends on the manufacturer, the material from which this heating device is produced, as well as its power.

Summarizing the above: Pay attention to the radiators, calculated:

• to work with a temperature of the coolant 100 - 110 ° C;
• pressure in from 13-16 kg / cm 2;
• necessary thermal power.

Make an approximate calculation is simple enough, knowing that for heating 1 m 3 standard apartment In a high-rise building, it is necessary to 35-40 W. thermal energy.

Tip: If you prefer batter models, issued under foreign stamps, pay attention to devices adapted for operation in domestic heating systems. As a rule, it is indicated in those. Documentation for instruments.

Types of heating devices and their main technical specifications

Today, in the domestic climate technology market, radiators that differ in design and material from which they are made are widely represented.

• Aluminum. Quickly heated and quickly give warm.
• The main disadvantages of these instruments is the sensitivity to sharp pressure drops and sensitivity to chemical composition coolant. Advantages of this type of instruments - Democratic price, stylish appearance and a huge range of models of various sizes and thermal power. Conclusion: Aluminum batteries are better to choose in an apartment or a private houseequipped with autonomous co.

Steel. Quickly heated and well give thermal energy. Disadvantages: low working pressure, low resistance to corrosion, maintenance of maintenance. The advantages of steel models include low cost and high degree of heat transfer. Conclusion: Steel batteries for the apartment are better not to choose.

Important! If the choice fell on steel products, then you should carefully approach the calculation of their power. Specialists recommend when choosing to pay attention to steel heating radiators Buderus.

Before moving to the rating of heating radiators for the apartment, it is impossible not to mention bimetallic models, which, despite the high cost, beat all records in popularity among our compatriots. And this is not surprising, because bimetallic batteries have excellent heat transfer rates, resistant to active chemicals in the coolant, and sufficiently carry pressure jumps in CO. The only requirements when choosing bimetallic models is a competent selection of power and the correct choice of manufacturer.

Externally, bimetallic batteries are very similar to aluminum, but in contrast to them, withstand pressure up to 40 kg / cm 2. Bimetallic devices are perfectly suitable for both centralized and autonomous heating systems.

Most popular models

The first place in the ranking of heating radiators, among aluminum products is the model of Royal Thermo Revolution 500 (Italy).

Sectional heat exchanger with a power per section 181 W. Perhaps Lower I. diagonal scheme Connections. Maximum pressure - 20 bar. The volume of the coolant per section is 370 ml.

Based on the reviews, the best steel heat exchanger is unanimously recognized by the model of the German panel radiator Kermi FTV 22 500.

With the maximum permissible indicators of the pressure and temperature of the coolant (110 ° C; 10 bar), the panel power reaches a mark of 5.8 kW. Lower connection to CO. The model can be used in central system Heating.

The most popular, among our compatriots, the cast-iron radiator is the heat exchanger of Sti Nova 500.

Battery power can reach 1.2 kW. Side connection. Operating pressure 15 bar. Permissible temperature 150 ° C.

The best bimetallic heating radiators, according to users and most professionals, are sectional heat exchangers Rifar Monolit 500.

The maximum working pressure is 100 bar, the permissible temperature of the coolant 135 ° C. The power of the battery depends on the number of sections and can be 2,7kW. Wall mount, the possibility of lower and diagonal connection to CO.

Tip! The choice of batteries in the apartment is a rather responsible step, to entrust it better to professionals.

Criteria right choice Heating devices. Types of heating radiators, materials and basic technical specifications. Rating of heating batteries for an apartment according to specialists and consumer reviews.

What aluminum heating batteries are better - the rating of firms and producers of radiators

Where aluminum radiators are produced

In order to avoid some confusion, we will talk about what country there are certain firms, and not about the place of finding a particular plant, which produces certain models of radiators. It is well known that many manufacturers have long moved their production to China and produce equipment there under well-known European trademarks. It is not an exception and market of heating devices.

The geographical location of the main producers of aluminum radiators can be divided into four groups:

1. Western Europe. Here, the leader, no doubt, is Italy, although it should be noted that it is practically no special competitors in this region. Leading countries of the European Union, such as England and Germany do not produce discussed products, and among the others can be remembered by Spain;
2. Eastern Europe. In addition to assembly Italian plants there are also its production. It is focused mainly in Hungary and Poland;
3. Russia. Among domestic suppliers also have from anything to choose: some trademarks are manufactured on foreign licenses, there are also their developments;
4. China. When choosing Chinese goods, it is better not to succumb to the temptation to buy a very cheap heating device. It is also quite dangerous to acquire a product of the company with a completely unknown name.

Italian radiators

Italy supplies quite a variety of radiators models to our market. Of course, they all have the highest quality, but, at the same time, are quite expensive. The cost of aluminum batteries is customary to compare the price of one section. When analyzing specific models, we will indicate thermal power and the approximate cost of the section at the time of our review (June 2014).

Global Radiatori.

Radiators from the company Global Di Fardelli Ottorino & C is definitely headed by our aluminum heating devices. This is a classic European quality confirmed by warranty service for 10 years.

Global products are fully adapted to the realities of our heating systems and is intended for use in both private houses and urban apartments.

What features of Global radiators are best characterized by this brand?

The model range consists of two radiators: ISEO and VOX. The power of the 500 mm ISEO section is about 180 W, VOX this indicator is a bit better - 195 W. Therefore, this modification is slightly more expensive - 430 rubles. For the section, while the similar product ISEO costs 400 rubles.

In general, if the budget allows you to choose this company, you should not doubt - the leader is the leader.

Battery Sira Quarzo.

The company is famous for being the first who came up with and released an aluminum radiator. And it was more than 50 years ago - in 1961. Since then, cast and extrusion aluminum heating radiators are one of the main elements of the Sira range produced.

And in this assortment there is something to choose from. Among the extrusion models are best known to the Alux and Nik series.

• AlUX is "native" Italy, it is "more abrupt" and more expensive - a 500 mm model (and our rating will be formed only for such sizes) has a capacity of 190 W and costs about 400 rubles;
• The NIK modification is made in China, the power of the section 175 W, the price is 320 rubles.

Cast radiators Sira S2 and Sira Quarzo combine exquisite design and high performance characteristics.

Considering that only a few manufacturers include products made by high pressure injection molding method, both models can be attributed to the premium equipment.

This confirms the unique warranty period of 15 years, which has no analogues of competitors. Well, it is Italy, a country where you can do everything for heating.

Aluminum SIRA radiators are sold ready-made assemblies, ranging from 4 sections. The parameters of cast models are better than extrusion - their heat transfer about 200 W, and the cost - in the area of \u200b\u200b450 rubles. For the section.

You can talk about Italian producers of radiators for a very long time. But still, we are forced to stop to provide at least a little place of heating devices from other countries. Therefore, Fondital completes our rating of pure Italian products.

Calidor Super Aleternum radiator characteristics

From the assortment of this company, we chose one model called Calidor Super Aleternum. Why - judge yourself:

• The model is designed specifically for Russia and meets the requirements of the existing GOST;
• The inner surface is treated with a special coating that protects against the appearance of air and corrosion bubbles;
• The permissible pH of the coolant - 5-10;
• Working pressure - 16 atmospheres;
• Heat transfer section 193 W;
• Section price about 500 rubles;
• Country of origin - Italy.

Pay attention to the permissible pH indicators for this model. Most Italian manufacturers in the descriptions indicate the range of 7-8, which can significantly affect the warranty - we do not have the confidence that these regulations are followed in each Russian house.

Radiators from Hungary

Delight-free Aluminum Nami radiators have long been known in the Russian market. Many sellers characterize these models as the best quality combination and price. Indeed, Nami has a series, also adapted to non-standard coolant indicators - it is called Nami Grande:

Nami Classic radiator

Double anti-corrosion coating;

Coolant temperature up to 120 ° C;

Permissible pH value to 12;

Working pressure 12 atmospheres;

Heat transfer section 195 W;

Section price less than 400 rubles;

10 years warranty.

There are also standard Nami Classic radiators. They cost about the same, but they do not differ as high characteristics and therefore are not particularly interesting.

In general, Hungarian radiators are really good and have a completely reasonable price - after all, it is not Italy. And they are produced at factories in China or in Russia.

Domestic aluminum radiators

Russian aluminum heating batteries are also of interest to buyers. They are produced on modern imported equipment, have good characteristics and affordable prices.

Battery Rifar Alum Ventil

This series of radiators is performed under the license of the Italian company Global, the products of which we have already considered. Aluminum products are represented by Alum and Alum Ventil models. We will briefly describe their characteristics:

• Special design of the vertical channel - without welding;
• Working pressure up to 20 atmospheres;
• The possibility of using antifreeze;
• Heat transfer 183 W;
• Section price 410 rub;
• Warranty 10 years, service life of 25 years.

Despite the fact that Rifar radiators are produced in Russia, the requirements for the hydrogen indicator (pH) they have sufficiently rigid - 7-8. At the same time, it is clearly indicated in the passport that it is prohibited to apply the coolant with other parameters.

So if you are not sure as your system, it is better to choose something else.

A low-cost radiator with a working pressure of up to 20 atmospheres and good pH - from 7 to 9, a good flow chart and a protective coating that protects against corrosion. The thickness of its sections is only 60 mm, so it will easily fit into a small niche. Due to this, the sectoral heat transfer is not very high - 167 W, but the price cannot but rejoice - only 250 rubles. For the section.

Chinese batteries

There was already a lot of quality about the quality of different Chinese products. We will not make the retelling of capital truths, and better give several firms that, in our opinion, are worthy of attention:

• Maxterm - Operating pressure 16 Atmospheres, heat transfer 182 W, Section price - 250 rubles. 10 years warranty;
• STI - Operating pressure 18 Atmospheres, heat transfer 204 W, Section price - 250 rubles. 10 years warranty;
• EPICO - Operating pressure 16 Atmospheres, heat transfer 189 W, Section price 285 rub. 10 years warranty.

As can be seen from the fluid analysis, Chinese radiators are much cheaper than European. It is important to check the quality of manufacture, in particular the thickness of the ribs, especially the side and rear walls, and look at the warranty.

In a small review, it is difficult to cover all available offers. Many worthy European and domestic firms remained beyond our research. But even in the list of list, you can choose suitable equipment for yourself.

What aluminum heating batteries are better - the rating of firms and producers of radiators

What aluminum heating batteries are better - the rating of firms and producers of radiators where aluminum radiators are produced in order to avoid some confusion, we will talk about what

Heating radiators, what better to choose?

When you are going to buy radiators of heating, you need to prepare in advance. One desire to purchase devices is not enough. It is necessary to study the technical characteristics and parameters of radiators to find out, the heating radiators are better - it is for your heating system.

You can compare quite the same batteries in the view, but on heat transfer, power - they may vary noticeably. Here, everything will be dependent on the material of the manufacture of the radiator and its design features, the inner capacity of the batteries, the method of their connection. That is why when you choose the battery of heating what is better - you need to prepare and possess some knowledge.

Radiator

What requirements are made to the installation of radiators?

If you believe standard calculations, then the consumption of 90-125 W per 1 sq. M. The room is heated. In this case, the presence in the room windows, doors, the height of the ceilings is not more than 3 meters, the temperature of the coolant 70 degrees Celsius.

If such standards are violated, for example, the height of the ceilings is greater, then the power of the radiators should be increased to the same. And if you have windows with double-glazed windows, then they have low heat transfer, respectively, as showing reviews, power can be reduced by 10 percent.

If the temperature of the coolant decreases, it will require an increase in batteries, or you can increase the number of sections. Each time the temperature decreases by 10 degrees, it is compensated for by an increase in power by 15-18%.

Table selection sections of heating radiator

When calculations are held, whatever the best heating radiators, it is necessary to consider the features of the design of your heating system. And if the heat carrier feed will be carried out through the bottom hole, and the reverse move - through the top, then in this case each radiator will not give up to 10 percent of its power. If the coolant is supplied only on the one hand, then setting more than 10 sections will be meaningless - because the last sections will warm enough.

Comparison of heating batteries

First of all, we note that answering the question of which heating batteries are better, quite difficult, without possessing special knowledge. We note panel steel radiators. Such heating devices have high efficiency - their working pressure is 9 atmospheres, they are able to withstand 13 atmospheres of crimping. As the rating of heating radiators shows, they are very in demand when an individual heating system is put and when there are its thermal item in high-rise buildings.

Such high-quality heating radiators are made from steel sheets with special recesses for the passage of the coolant, and in order to increase the heat transfer of instruments - the protruding ribs are welded on the opposite direction, which will further increase the convection flow of air. Radiators are made of low carbon steel, which has increased corrosion resistance. They are covered with powder enamel.

The following form we consider are cast iron radiators. Of course, this option will not answer the question of what the best heating radiators.

Cast iron batteries are a classic that previously Soviet consumers have used anything else.

These are really high-quality products, the main advantage of which is cast iron. This material has excellent thermal conductivity, it is resistant to any coolant. The share of radiation flow includes 70% of heat and 30% convective - it will warm up the lower and upper zones of the room. It is worth noting that the life of the cast-iron radiator can be up to 50 years. To date, such radiators can be bought relatively cheaply, the market presents different modelsAs can be seen in the photo.

Cast iron radiators

With superficial comparison, aluminum radiators will seem easier, elegant. But then you will learn that such better heating batteries also have improved heat transfer. Such radiators are made by casting or extrusion. Each section has manifiers, as well as connecting vertical channel, ribs to accelerate the flow of air and removing heat from the plane, which is why heat in the room will be distributed optimal.

They collect such radiators with nipples of steel, there are special gaskets from the waterproof material between the sections. There are fins on the front surface, it forms a solid surface, as well as the air-sized windows from above. Select the heat power of such radiators need a set need quantity Sections, also - and their heights. You can simply collect the radiator with the desired height and length in order to fit it well into the architectural features of your room.

Aluminum heating radiators

As for the shortcomings of this type of batteries, these are high demands on the chemical parameters of water. In addition, as part of heat exchangers, brass and copper fittings, steel connecting pipes - all this increases the corrosion process. And the more copper there is - the stronger this process will be. To level this drawback, manufacturers use alloys that will protect batteries from the inside.

According to experts, bimetallic radiators are the most efficient heating batteries.

Steel channels that carry out the coolant will ensure the strength of the entire design. They are also closed with aluminum fins, so the water comes into contact only with the metal. There are several different options execution of such batteries. They can do, covering steel frame aluminum - so, water will be in contact with only steel. Also, steel can enhance vertical channels so that the thickness of them can withstand a large pressure.

Bimetallic The Best Heating Batteries can transfer high pressure and long-term load, they are resistant to hydraulic shocks and have a high level of heat transfer. The operating pressure is 35 atmospheres, and crimp - almost 52. And due to the fact that the capacity of bimetallic sections will be less than aluminum, it is positively reflected on thermalness. As the test shows, heating radiators are the most effective reliable in high-rise buildings. After the assembly, such best heating radiators are painted with powder enamel, they are heated for rejection and withstand 180 degrees Celsius. With the maximum temperature of the coolant temperature, 110 degrees will be enough.

We offer to explore the comparison of heating radiators, the table (Table 1) will show all the strongest and weaknesses. different species radiators.

Comparison of various types of heating radiators

After all, the question of which better heating radiators can be relevant long enough, and only a specialist who is familiar with your heating system can be fully able to fully correctly.

More information about the choice of bimetallic heating radiators in the material - bimetallic heating radiators, what better?

Heating radiators, what better choose, comparison, table

Types of heating radiators. Their device, features, principle of operation, dignity and disadvantages.

If you have already decided on the type of batteries for heating your home and decided to install aluminum radiators, you will definitely be the question of which manufacturer to give preference. Today there is such an abundance of proposals on the market that choose something suitable for quality and budget is quite difficult.

In this article, we will review several of the most popular brands that offer our products to Russian consumers, and form a kind of radiators rating of them.

In order to avoid some confusion, we will talk about what country there are certain firms, and not about the place of finding a particular plant, which produces certain models of radiators. It is well known that many manufacturers have long moved their production to China and produce equipment there under well-known European trademarks. It is not an exception and market of heating devices.

The geographical location of the main producers of aluminum radiators can be divided into four groups:

1. Western Europe. Here, the leader, no doubt, is Italy, although it should be noted that it is practically no special competitors in this region. Leading countries of the European Union, such as England and Germany do not produce discussed products, and among the others can be remembered by Spain;
2. Eastern Europe. In addition to assembly Italian plants there are also its production. It is focused mainly in Hungary and Poland;
3. Russia. Among domestic suppliers also have from anything to choose: some trademarks are manufactured on foreign licenses, there are also their developments;
4. China. When choosing Chinese goods, it is better not to succumb to the temptation to buy a very cheap heating device. It is also quite dangerous to acquire a product of the company with a completely unknown name.
   

Italian radiators

Italy supplies quite a variety of radiators models to our market. Of course, they all have the highest quality, but, at the same time, are quite expensive. The cost of aluminum batteries is customary to compare the price of one section. When analyzing specific models, we will indicate thermal power and the approximate cost of the section at the time of our review (June 2014).

Global Radiatori.

Radiators from the company Global Di Fardelli Ottorino & C is definitely headed by our aluminum heating devices. This is a classic European quality confirmed by warranty service for 10 years.

Global products are fully adapted to the realities of our heating systems and is intended for use in both private houses and urban apartments.

What features of Global radiators are best characterized by this brand?

• Operating pressure 16 atmospheres;
• Protective coating of the inner surface with fluoro-zirconium composition;
• Making casting method;
• Elegant design with rounded lines;

The model range consists of two radiators: ISEO and VOX. The power of the 500 mm ISEO section is about 180 W, VOX this indicator is a bit better - 195 W. Therefore, this modification is slightly more expensive - 430 rubles. For the section, while the similar product ISEO costs 400 rubles.

In general, if the budget allows you to choose this company, you should not doubt - the leader is the leader.

Sira Industrie.

The company is famous for being the first who came up with and released an aluminum radiator. And it was more than 50 years ago - in 1961. Since then, cast and extrusion aluminum heating radiators are one of the main elements of the Sira range produced.

And in this assortment there is something to choose from. Among the extrusion models are best known to the Alux and Nik series.

• AlUX is "native" Italy, it is "more abrupt" and more expensive - a 500 mm model (and our rating will be formed only for such sizes) has a capacity of 190 W and costs about 400 rubles;
• The NIK modification is made in China, the power of the section 175 W, the price is 320 rubles.

The cast radiators Sira S2 and Sira Quarzo combine exquisite design and high performance characteristics.

Considering that only a few manufacturers include products made by high pressure injection molding method, both models can be attributed to the premium equipment.

This confirms the unique warranty period of 15 years, which has no analogues of competitors. Well, it is Italy, a country where you can do everything for heating.

Aluminum SIRA radiators are sold ready-made assemblies, ranging from 4 sections. The parameters of cast models are better than extrusion - their heat transfer about 200 W, and the cost - in the area of \u200b\u200b450 rubles. For the section.

Fondital.

You can talk about Italian producers of radiators for a very long time. But still, we are forced to stop to provide at least a little place of heating devices from other countries. Therefore, Fondital completes our rating of pure Italian products.

From the assortment of this company, we chose one model called Calidor Super Aleternum. Why - judge yourself:

• The model is designed specifically for Russia and meets the requirements of the existing GOST;
• The inner surface is treated with a special coating that protects against the appearance of air and corrosion bubbles;
• The permissible pH of the coolant - 5-10;
• Working pressure - 16 atmospheres;
• Heat transfer section 193 W;
• Section price about 500 rubles;
• Country of origin - Italy.

Pay attention to the permissible pH indicators for this model. Most Italian manufacturers in the descriptions indicate the range of 7-8, which can significantly affect the warranty - we do not have the confidence that these regulations are followed in each Russian house.

Radiators from Hungary

Delight-free Aluminum Nami radiators have long been known in the Russian market. Many sellers characterize these models as the best quality combination and price. Indeed, Nami has a series, also adapted to non-standard coolant indicators - it is called Nami Grande:

There are also standard Nami Classic radiators. They cost about the same, but they do not differ as high characteristics and therefore are not particularly interesting.

In general, Hungarian radiators are really good and have a completely reasonable price - after all, it is not Italy. And they are produced at factories in China or in Russia.

Domestic aluminum radiators

Russian aluminum heating batteries are also of interest to buyers. They are produced on modern imported equipment, have good characteristics and affordable prices.

Rifar.

This series of radiators is performed under the license of the Italian company Global, the products of which we have already considered. Aluminum products are represented by Alum and Alum Ventil models. We will briefly describe their characteristics:

• Special design of the vertical channel - without welding;
• Working pressure up to 20 atmospheres;
• The possibility of using antifreeze;
• Heat transfer 183 W;
• Section price 410 rub;
• Warranty 10 years, service life of 25 years.

Despite the fact that Rifar radiators are produced in Russia, the requirements for the hydrogen indicator (pH) they have sufficiently rigid - 7-8. At the same time, it is clearly indicated in the passport that it is prohibited to apply the coolant with other parameters.

So if you are not sure as your system, it is better to choose something else.

Thermal

A low-cost radiator with a working pressure of up to 20 atmospheres and good pH - from 7 to 9, a good flow chart and a protective coating that protects against corrosion. The thickness of its sections is only 60 mm, so it will easily fit into a small niche. Due to this, the sectoral heat transfer is not very high - 167 W, but the price cannot but rejoice - only 250 rubles. For the section.

Chinese batteries

There was already a lot of quality about the quality of different Chinese products. We will not make the retelling of capital truths, and better give several firms that, in our opinion, are worthy of attention:

• MAXTERM - operating pressure 16 atmospheres, heat transfer 182 W, Section price - 250 rubles, 10 years warranty;
• STI - Operating pressure 18 Atmospheres, heat transfer 204 W, Section price - 250 rubles, 10 years warranty;
• EPICO - Operating pressure 16 Atmospheres, heat transfer 189 W, Section price 285 rub., Warranty 10 years.

As can be seen from the fluid analysis, Chinese radiators are much cheaper than European. It is important to check the quality of manufacture, in particular the thickness of the ribs, especially the side and rear walls, and look at the warranty.

In a small review, it is difficult to cover all available offers. Many worthy European and domestic firms remained beyond our research. But even in the list of list, you can choose suitable equipment for yourself.

Aluminum radiators - the best heating devices for the device of the heating system of urban or country low-rise buildings. To know how to choose them to choose them among a huge range of products of special stores, you need to familiarize yourself in advance with their design ( general form, sizes, characteristics) and with what aluminum radiators are better for the heating of your apartment or cottage.

Design

Sections of aluminum radiators are not made of pure aluminum, but from its alloys with silicon additives. Due to this, the aluminum apparatus becomes much stronger and more resistant to corrosion. For an even greater increase in the anti-corrosion properties, the internal cavities with which the coolant comes can be polymer coating. Its dimensions can be about 50 microns.

Different models of aluminum heating batteries can be very different with design. They are distinguished:

1. By general type:

• Panel whose sections are made from a pair of connected welding plates,
• Tubular consisting of visible tubes.
• Molded aluminum radiators are made by solid casting.
• Extrusion, or aluminum sectional radiators, consist of elements connected with bolts (in the standard case of three). The assembly of sections in this case includes the process of sealing joints to eliminate water leakage with silicone or paronite gaskets.

1. By the method of manufacturing section:

Attention! The quality of radiators does not depend on the presence of problem places, and from the manufacturer: high-quality aluminum sectional radiators can last longer than cast, made unscrupulous firm.

1. On dimensions:

• Having standard dimensions: a width of about 40 cm and a height of 58 cm.
• The height of low aluminum radiators can reach only 15 cm. This allows them to be able to even in limited space sizes. There may be a large width, which compensates for the heat transfer "trimmed" height of the radiator. At the moment, some firms offer even an innovation in the form of a "plinth" aluminum battery with a height of about 2 - 4 cm.
• High (vertical). Have a small width and large vertical dimensions (up to 2 - 3 meters), which makes it possible to place them on small areas of rooms with high ceilings, if you need to heat a large amount of air. Look very decorative, can be original design To perform additional functions (for example, with kitchen towel holders).

1. By way of connecting

• With the upper connection, which is best suited for instruments such as low height radiators.
• With lower connections. Aluminum heating radiators with lower connections are characterized by a more elegant appearance and a simple editing procedure. In this case, the pipe for supplying to the water radiator does not pass through the entire room and can be hidden under the plinth.
• Diagonal, in which input can be located on top of one side, and outlet of the other side.
• Side are used for a single-tube heating system.

Attention! When buying batteries with a specific connection, do not forget that one-tube radiators heat transfer device decreases by about 10-20%. It will be better than heat transfer from devices with the lower and diagonal compound.

In addition, the battery design may provide for the thermostatic valve of the built-in type. If there is any, then you can set the thermostat on it. With it can be supported in the apartment such temperature modeWhat is necessary for comfortable well-being.

Specifications

General properties

• Pressure. Modern aluminum radiators can withstand water pressure from 6 to 25 atm. (up to 30 atm. with control tests and crimping). This allows the use of an aluminum device for any standard heating systems in urban and country low-rise construction.

Interesting! Tubular aluminum radiators can withstand a slightly larger volume of water pressure than panel. In addition, the internal cavities of the radiator may have different sizes and the cross section shape is standard elliptical or reinforced, close to rectangular. At the same time, the "reinforced" radiator reacts better to an increase in water pressure.

• Volume. The coolant used is water. Aluminum radiators require a sufficiently small amount of water (in contrast to the batteries of similar power from other materials).
• Temperature. In an aluminum radiator, the coolant can be heated to very high temperatures - about 130 ° C. For water, this is more than enough.
• If you want to choose batteries with the best heat transfer, which quickly heat the cooled room, then these are aluminum radiators. The power of the section in this case is up to 230 W, which is much better than steel and cast-iron devices.
• The service life of aluminum devices is 15-20 years.

Table. Specifications of aluminum radiators

Benefits

• Lungs,
• Quickly heated
• Small volume of water allows saving the energy of boilers, which heats the coolant,
• Well adjustable with thermostators,
• Cost cheaply
• Easy mounted
• It looks beautiful in the premises of any design.

If you want to decorate the room and turn the heating system to the original element of the interior, it is worth paying attention to aluminum radiators of design development.

disadvantages

Aluminum devices can have the following drawbacks:

• Between the sections of poor-quality devices can rinse the flows of water,
• Assembling a system containing aluminum elements may have a small inner gas formation due to sluggish chemical reactions that pass between different metals. Excess air volume can break the batteries, so they need to install automatic air valves.
• Aluminum is an active metal. Therefore, over time, corrosion sizes are not excluded, which will lead to the destruction of the edges of the device.

What better to choose and how to save them?

How to choose radiators so that they will be served as long as possible? The service life of radiators will be directly dependent on only from their species, but how high quality the assembly has been carried out and what will be the care for the finished system:

• Do not forget to calculate the necessary power dimensions for each room.
• The radiator installation should be held by construction rules, which includes compliance with some numeric parameters: the dimensions of the distance to the windowsill, to the wall and to the floor. Therefore, pick up such devices whose dimensions will be suitable for you.
• Note that you may need instruments with different connection to the system - upper, bottom, etc.
• Pay attention to the color of the devices. Interestingly, those who are painted in a darker color, heat transfer will be more.
• Remember that the finished system should be kept clean: if rinse radiators from dust, then heat they will give much better.
• From time to time it will also be necessary to wash the internal volume of the battery, as the coolant can clog it in it with the suspenders.

Attention! If you are not quite confident in your own competence, the choice and assembly of aluminum radiators should be carried out experienced masters. Also in order to rinse the clogged system, it is better to invite specialists.