How to paint a rusty refrigerator. The choice of paint and tools for self-painting the refrigerator. What paint to paint the refrigerator at home

Surely many in the garden or in the country have old refrigerator, the sight of which has not been pleasing to the eye for a long time. Sometimes people do not realize that it can be updated and that it will perfectly fit into the interior.

If your refrigerator is still in good working order, but its appearance is depressing, feel free to start restoring it. You yourself will be surprised at the result, and all that is required is your desire, minimal experience and small financial investments. Why spend money on new equipment when you can make the old designer one?

The best options for painting the outside of the refrigerator

Not sure how you would like to see your refrigerator? Can't draw and fantasize? It does not matter, because today on the Internet it is easy to find many simple and unusual solutions... Everyone will choose among them what is right for his occasion and interior.

Video ideas:

Basic rules for high-quality painting

In order for the paint to lay down well and serve for a long time, it is necessary to successfully select it and strictly observe the painting technology during work.

How to choose the right paint

The restoration will require paint and a minimum of tools. All that is needed is a narrow roller and brush, and in the case of using aerosol cans, even they are not needed. The selection of a coloring composition is a responsible matter, because it must not only perform a decorative function, but also protect equipment from various mechanical damage. Therefore, paints and varnishes are required that meet certain requirements: they are easy to tint, hold the paint vertically, and are resistant to detergents.

For this purpose, a waterproof paint for metal, used for indoor work, is suitable. It can be polyurethane, acrylic, oil, car nitro enamel, zinc, silicone, epoxy, nitrocellulose or other paint. They all differ in composition, but in this case it does not matter.

Colorants can be matte, glossy, luminescent, smooth or textured, differ in color, have different drying times, cost. The most budgetary, harmless and simple option is acrylic paint for metal.

Stages of staining

Before starting the process of dyeing the technique, it is necessary to carry out some preparatory workso that the paint runs evenly and smoothly.

Preliminary work:

1. Disconnect the fridge from electricity.
2. Remove the shelves and trays inside.
3. Clean the outer surface from dirt and grease. This is easy to do with a hard sponge and grease remover.
4. To keep the paint better, remove the old coating with sandpaper, sand chips and scratches.
5. Wipe off the resulting dust with a damp cloth, then wipe dry.
6. Degrease the surface using special chemicals.
7. Apply a primer if necessary.
8. Protect your hardware with cling film, wide tape or masking tape.
9. Cover the floor and other surfaces that may be stained with newspaper or oilcloth.
10. Start by painting an inconspicuous area.

Dyeing

Attention! When working for safety, it is necessary to use personal protective equipment. In this case, a respirator and rubber gloves act as their role.

It is best to paint outdoors in warm and calm weather. If this is not possible, a bright, well-ventilated room will do. But in this case, it is better not to use car paint in cylinders, as it is the most toxic.

Staining rules:

1. It is necessary to apply the coloring composition in 2-3 layers.
2. After each layer, you need to take a break for 30 minutes so that it dries well.
3. When painting, the roller or brush is more convenient to move from left to right or from top to bottom.
4. Hard-to-reach areas are easy to paint over with a small brush.
5. Spray acrylic varnish can be used as a final layer to give the surface a gloss or matt finish.

Aerosol painting technology

When painting with aerosol cans, they must be kept at a distance of 30 cm from the surface to be painted. At the same time, all movements should be performed evenly and without stopping, so that paint sags do not occur. If it is necessary to remove minor paint defects, use solvents.

Creative technologies for staining and decoupage

• Want to turn your old refrigerator into a whiteboard? It can be used to write recipes, notes to loved ones and show guests an original solution.
• Kitchen appliances can be painted not monotonously, but by adding multi-colored stripes or geometric shapes. At the same time, it is convenient to use masking tape on color transitions for a more accurate result.
• Painting or a ready-made stencil will also be a good solution. The stencil can be easily made with your own hands.
• Decoupage. Sometimes people don't want to bother with coloring, but prefer to update the refrigerator using film. But this method requires a lot of dexterity and experience to lay the film flat and without bubbles. But there is an easier option - decoupage. His technique is very simple and accessible even to a schoolchild. It requires almost no money and takes a minimum of time. Decoupage applique made of paper, which is varnished for practical use. For this, decoupage cards, paper multilayer napkins are suitable. You can also cut a picture from magazines, draw it yourself, or print it from the Internet using a color printer.

As you can see, the procedure for painting the refrigerator is simple and you can easily do it yourself at home. It only takes time and your imagination. Present to your refrigerator new life, and you will noticeably transform the old interior of your kitchen.

How to paint a refrigerator at home? This question sooner or later arises among many who have a properly working old unit.

Although it will not look brand new, the owner can radically change its design and mask the peeling paint or cracks that have formed. The article invites you to get acquainted with what paint you can paint the refrigerator with.

To paint a refrigerator at home, you must first determine the purpose of the painting.

This could be:

• Renovation of a used unit.
• Painting it in a different color that will blend in with the wallpaper.
• Make a designer refrigerator out of an ordinary refrigerator.

After defining the target, paint is also selected. You can use spray paint to update the shabby corners of an old refrigerator, but paint for metal is a more reliable option.

Tip: Although there are a large number of paints on the market that can be applied even on rust, you should first remove all old poorly adhering paint and degrease the entire surface.

What paint to paint the refrigerator?

There is no definite answer to it, you will need to choose from several options:

• To restore appearance, the refrigerator is painted with enamel paints, which are used in manufacturing plants for the initial dyeing of products. It can be:

1. enamel in jars;
2. automobile paints produced in aerosol cans. Their price is much higher, which is due to the presence in the composition of components that ensure the resistance of the composition to atmospheric influences, which of particular importance does not have for home refrigerators.

The advantages of enamels:

1. high-quality adhesion;
2. durability;
3. beautiful glossy shine.

The disadvantage of the coating is the rather high toxicity of the solvents.

• Epoxy paints... These pigments in their characteristics during operation are practically the same as those of enamels, but the technology of applying them to the surface is much more complicated. In addition, the cost of a good quality epoxy is quite high.
• Acrylic blends. This option is considered budget decision for coloring the refrigerator. Their characteristics are inferior to epoxy compositions, but at the same time the margin of strength and durability of the coating is sufficient.

The advantage of acrylic is a wide range of palettes. This is especially in demand when deciding to give original decor refrigerator.

Before repainting the refrigerator, you must not forget about the use of restorative compounds. This is necessary if there is rust on the walls of the product, which will prevent the development of corrosion. In this case, materials that contain aluminum or zinc granules, such as Zinga conductive paint, help.

How to choose painting tools

After choosing a paint, you need to purchase the necessary tools.

It can be:

• Roller and brushes. In this case, the staining process will take longer, and the surface quality is slightly worse. However, the use of a roller and brushes, when using a thin decor, allows all the work to be done more accurately, without paint getting on the walls and floor.
• Spray gun (see Selecting a spray gun for painting). It is good to use such a device if it is possible to take the unit out to a free open large space, or completely protect the existing environment and territory from pollution. As a result, when using a spray gun, the coating will be a thin, uniform layer.

Tip: Nitro paints are usually applied from a spray gun, and for small areas such a device should be replaced with an aerosol can and painted as shown in the photo.

With a spray gun, paints can be sprayed to protect the metal from fire, such as Polistil, but when restoring the refrigerator, their use is not always justified, it is better to use more suitable compositions.

• When planning color combinations, masking tape or plastic wrap should be used to separate areas.

Sticking masking tape on the surface of the refrigerator

Tip: Do not use regular sticky tape: the glue on its surface leaves marks on the refrigerator, paint will not adhere well to them.

How to paint a refrigerator

Tip: Do not paint or touch the back of the unit, it can be very hot.

Before you start, you need to purchase:

• The previously selected paint.
• Rollers and pallets.
• Ordinary ammonia.
• Rags.
• Sponge.
• Duct tape.
• Special anti-rust agent.

Refrigerator painting instructions:

• Prepared:

1. old newspapers or plain paper;
2. protective mask;
3. gloves;
4. rags;
5. detergent;
6. paint;
7. roller, brush;
8. foam tube;
9. ordinary scotch tape.

• The unit is switched off from the socket.
• All the devices included in it are pulled out of it:

1. boxes;
2. egg holders and so on.

• The refrigerator is thoroughly washed with detergents that dissolve the fat.
• It is better to unscrew the handles and other parts that cannot be painted so that they do not get dirty, and the paint lies flat in these places.
• Newspapers or paper are laid out along the perimeter around the unit, under the bottom of it, which will prevent staining of the floor surface.
• The level of the room where the refrigerator will be painted is leveled.
• The surface is examined. If there are spots with exposed rust, they should be brushed to bare metal.
• Damage to paint, chips, other defects of enamels, on such places it is necessary to apply a primer from a spray can.
• Places of transitions to enamel are thoroughly cleaned. For this, a very fine sandpaper is used to avoid visible transitions and to distribute the paint evenly.
• The primer is given time to dry.
• If necessary, a second, third layer is applied, which will level the surface.
• Before starting work on an invisible area of \u200b\u200bthe unit, it is checked right choice selection of paint color.
• The refrigerator can be painted. Car paint from a spray can lay down well and evenly, the surface will be smooth, durable to abrasion. The paint is applied in a thin layer from a sufficient distance. Each layer should dry well. The whole process can be seen in detail in the video in this article.

It is better to paint the unit while standing. A beautiful pattern can be applied to the refrigerator panel.

To do this, an image is applied with a thin brush or a picture or motif you like is outlined. If desired, the finished unit is covered with automotive varnish, which will allow it to shine and sparkle pleasantly in the sun.

Decor can be applied to the refrigerator. There are several ways to do this.

Vinyl stickers are pasted on the surface. They perfectly mask defects and can perfectly transform the interior of the entire kitchen.

A high-quality refrigerator has been working without repair for more than a decade. It is a pity to throw away a serviceable refrigerator, but it is very discordant with the modern kitchen decor. Restoration will save, but first you need to pick up paints, get acquainted with the technology of work, ensure safety for children and animals.

The industry offers formulations based on various film-forming substances. Not all are suitable for covering the outside of the refrigerator. Our task is to find suitable enamels - the most durable films.

The composition needs high adhesion - the paint must firmly adhere to the base, otherwise peeling of the top layer will begin with the first scratch. The film needs elastic, because the body is subject to thermal expansion. The painted surface is wiped with detergents, the composition must be resistant to aggressive liquids.

Choosing a waterproof paint for internal works for metal. Such paints and varnishes include:

• two-component primer-enamel for galvanized metal;
• alkyd enamel;
• heat-resistant organosilicon enamel;
• nitrocellulose composition for metal and wood - automobile nitroenamel;
• acrylic matt enamel for metal surfaces;
• polyurethane or epoxy paint.

Can be sprayed or applied with a roller. What paint to paint the refrigerator, we choose an exception.

We do not need paint on galvanized metal, there is no need to overpay for heat resistance - the refrigerator is located away from hot surfaces.

What paint to paint the refrigerator at home

The task of the master is to get a flat surface, akin to the factory one.

The layer should be covering, lie flat, not drip down. It doesn't matter if you use an aerosolized material or use a roller or brush. The main thing is that the applied composition should dry out, not have smudges. Then the next layer is applied.

The choice of outside refrigerator color depends on the overall design of the room. You can create an accent spot or create a surface in harmony with the facade. The main thing is to use a suitable coating and do the job carefully. Automotive paint is the most durable of all. Acrylic is water-based, odorless, and shatter-resistant. Epoxy is most durable when exposed to moisture. What paint to paint the outside of the refrigerator is up to you.

Application for painting refrigerator blackboard paint

Having researched the market of paints and varnishes, we found several compounds that the masters advise to use for work at home. Do you want to make the fridge walls a corner of creativity? Then you should use slate paint for painting. The presence of composite particles in the composition will give the coating a slight roughness. The composition is created on a latex basis, the film is durable. On a dark, matte surface, you can draw with chalk. Drawings are washed off with soap and water. As an independent, dark-colored coating looks stylish.

The Finnish manufacturer Tikkurila is considered the best manufacturer of such formulations. Under this brand you can buy Liitu black paint. Sibiria is a domestic brand, slate, magnetic and marker compositions. Among them there are antiseptic properties.

Features of painting an old refrigerator

You need a black refrigerator - buy a jar of Sibiria PRO or MagPaint from Holland.

Can I paint my refrigerator with battery paint

How do batteries differ from a refrigerator? Only because they experience seasonal heat. That is, the film must be elastic, withstand thermal expansion, adhere tightly to metal, be neutral to detergents, and resistant to abrasion. The same requirements for the composition for refrigerators. Is it possible to paint a refrigerator and a battery with the same paint, creating a kitchen design? Which one to choose?

It is necessary to find a product that does not change color under the influence of temperature, with good hiding power and a decorative effect. It is better if the paint is odorless. We suggest choosing:

• alkyd enamel based on organic solvents has a white base element, the coloring pigment is added additionally, the smell is strong before drying;
• water-based acrylic enamel is odorless, only titanium dioxide-based paint is used for the refrigerator inside and outside;
• organosilicon alkyd enamel containing special pigments that hide the defects of uneven painting.

It is very important that all these compounds do not lose color over time, they can be decorated with a pearlescent additive.

Is it possible to paint the refrigerator

If the refrigerator chamber was enameled, rust inevitably appeared at the joints of the panels and in the cracks, no cleaning will save you from yellow stains. The inner surface is almost not ventilated, the air in the chamber is humid, it is difficult to choose a coloring composition. The smell of paint from the refrigerator is removed for a long time. Special absorbers are used based on activated carbon and selikogel.

Only water-based acrylate can be used. But before that you need to remove the rust, apply a special converter, degrease and prime the surface. It is almost impossible to remove odor and harm from other paints from the refrigerator.

It often happens that a completely serviceable refrigerator has healed, the environment has been changed, but it still works great, but has an unsightly lining. How to paint a refrigerator using the latest coatings at home? We use the experience, advice and videos of the masters.

Painting the refrigerator at home

We will start with the fact that the refrigerator has already been freed from the contents and everything that is not painted is unscrewed or covered with adhesive tape. The refrigerator body should be installed on a multi-layer newspaper deck around the perimeter and under the bottom.

Before painting the refrigerator, the surface should be washed, cleaned from rust and degreased. Rusty spots can be treated with a reducing agent. If there are chips, peeling, cracks, the places are cleaned with a smooth transition to enamel and treated with a primer. Each layer is dried, according to the instructions, processed with fine sandpaper, the surface of the refrigerator is brought to a perfectly even state before painting.

Let's define the purpose of painting:

• update the surface, leaving the same color;
• paint it in a different color, in harmony with wallpaper or a radiator;
• create a designer cover.

How can you paint your refrigerator at home? One obstacle - cannot be used powder paint - it is required to bake it in a special cabinet, there is no such possibility.

Automotive enamel is used to create a flat, uniform surface. Spraying your refrigerator is easy. In addition to the high price, the paint is toxic, intensive ventilation is required. The fine spray permeates the dust and settles on the floor. It is important to choose the right place where to paint the surface of the refrigerator. But the coating will be durable, not fading.

Epoxy paints can be used, but they are more difficult to apply and require skill. The coating will be resistant to detergents, glossy.

Water-based acrylic paints have a bright range, form a resistant film, and are non-toxic. You can use a roller or brush to apply paint. You can smear in one place no more than 2 times, otherwise the film will be on the brush. After the layer has dried, apply a second one.

How to paint a refrigerator at home, watch the video.

DIY painting the refrigerator

The refrigerator is already prepared for painting at home, cleaned of old defects, primed and sanded. Paints than to paint the old refrigerator outside are matched. It will not be superfluous to stock up on old rags to wipe the droplets and hands.

How to paint a refrigerator at home with your own hands?

The place of work has been prepared.

Before you start painting the refrigerator at home, you need to protect yourself, flowers, animals and loved ones from inhaling harmful aromas. Protective clothing, respirators, and a few pairs of gloves will save your skin and respiratory tract. Is it possible to take the device to the balcony? Required if aerosol is used. Dust settles on all surfaces, it is difficult to wash it off.

Using paint under a brush or roller, apply a thin layer. First, check how the composition lays down somewhere in an inconspicuous place. The paint should be opaque and not drip down a vertical surface. Each next layer is applied after the previous one has dried.

How can you paint the outside of the refrigerator

Manufacturers offer several varieties of metal paints that can be used to paint the refrigerator. But are they all right for you? You may not tolerate quick-drying solvents. Then you cannot use car paints and epoxies. Rubber paints - this is what the people call acrylic compounds for a strong thin film, they do not have a smell. Based on an aqueous solvent, they are initially only available white - there will be something to paint on old enamel inside the refrigerator. To receive the desired color powder dissolves in the primary composition, mixes until uniform color.

You already know how to paint a prepared surface with your own hands if you yourself primed the surface. Likewise, paint is applied. It is sanded after drying and reapplied until a uniform glossy surface is obtained.

There is a lot of educational material at your service, look at the photos on the topic of how to paint the refrigerator at home. White stripes are adhesive masking tape.

Can the refrigerator be painted a different color

Most often, refrigerators are pasted over with a film to change color. But the old "pot-bellied" refrigerators with rounded shapes are absolutely impossible to paste over. Is it possible to paint in a different color yourself? As in the case of restoring the previous color, you first need to clean and prime. Changing the color of your refrigerator is easy. It is necessary to apply the paint in a very thin layer with a roller, so that the old surface first shows through. Each time, the layer must dry. And so at least 5 times. At the end, you should put a gloss on it. In this case, the use of a spray will give a good result.

Can I paint the refrigerator with slate paint

A new range of paints are classified as slate and magnetic types. The magnetic base contains iron and has the ability to attract. Magnets stick to the surface.

Blackboard paint creates a surface that you can write on with chalk. Durable latex-based film slightly rough from used fillers. Therefore, the chalk drawing lies flat. You can wash it off with plain water and soap. For the refrigerator, the drawing can become part of the decor. But most importantly, the color of the coating depends on the filler. Matte paint lays down beautifully, looks dignified.

The old refrigerator will be transformed, will find a second life if you paint it with slate paint. This is not difficult to do; spray or canned composition is applied to the primed surface, like ordinary paints. You can find gray, golden, copper shades, but more often they sell black and dark green. The surface would be nice to decorate, there are many options.

Video

We suggest watching a video on how to properly paint and restore an old refrigerator.

If your refrigerator does an excellent job of its functions, but already looks shabby and does not fit at all into the interior of the kitchen, you can update it. Often it is the appearance of the device, or rather its damage, that is the main reason for the replacement. Old refrigerators are not thrown away, but sold, or used in the country. Accordingly, by updating the color, you can not spend money on the purchase of expensive equipment, if the rest suits.

Either self-adhesive foil or paint is suitable for this purpose. The first option is difficult to execute, because it is difficult to paste over the surface of the refrigerator evenly and without wrinkles. In addition, the film is easy to scratch, it quickly fade under the influence sun raysshining through the window. It is much easier to evenly repaint the refrigerator, and choose absolutely any color, and perhaps even create a drawing!

And now about everything in order, we will figure out how to paint the refrigerator at home, what kind of paint is suitable for this and what sequence of actions should be followed in order to cope independently, without the involvement of specialists.

Painting a refrigerator at home involves the use of special paint and tools. The surface of the technique cannot be attributed to simple or ordinary, respectively, not every coloring substance can be used. High demands are placed on the paint layer:

1. It must protect the facade from mechanical damage that occurs during operation.
2. It should give an updated look and diversify the interior.

Also, the paint should not "peel off" after a few months, that is, it must have high performance characteristics.

When choosing materials, take into account the peculiarities of using the device. If the refrigerator is always located in a dry and heated room, that is, in the kitchen, rust is not threatened. Another issue is if the refrigerator is located in a damp room, for example, in workshops or warehouses and other industrial areas with high humidity. In this case, it will be necessary to treat the surface with an anti-corrosion solution. For home use, such a solution will be inappropriate, as well as a fire-fighting base or paint, because a refrigerator near a fire, in principle, cannot be connected.

In this case, a paint that can be mixed with other colors, adheres to a vertical surface, is elastic in structure and is resistant to detergents is preferable. Thus, to paint the refrigerator, you need a metal paint for interior work that is resistant to water.

There are several types of such paints, and the following types are ideal:

• nitro enamel for car painting - this type is well applied, has a high durability, has a beautiful shiny shade. The paint is sold in aerosol cans, so the application will not cause difficulties. Among the shortcomings, one can single out the high cost, toxicity (it should be used with open windows and in a respirator), the inability to control splashes. To organize the process, you will have to close walls, floors and furniture in order to exclude subsequent cleaning;
• acrylic paint for metal - application is carried out with a roller or brush, differs in many colors. The composition is characterized by safety, since there are no toxic substances in it;
• polyurethane paint - of all types, it is more resistant to wear. Moreover, it can be used both for the outer surface of the refrigerator and for the inner one. It is not afraid of low temperatures, it is easy to apply, so in cases where you need to paint over scratches, they use it.

What tool is needed

It is impossible to start painting immediately, the surface must always be prepared in advance. The refrigerator is located in the kitchen, where food is constantly being prepared, so any housewife has traces of grease covered with dust on its surface. These may be the smallest specks, but they are. That is why, before starting work, it is necessary to wash the surface well so that the paint lies smoothly and easily, eliminating cracks and chips in the future.

To organize work, including preliminary preparation and further painting, you will need the following tools and materials:

• detergent to remove dirt;
• abrasive sponge;
• rags (dry and wet);
• fine-grained emery paper;
• acetone or kerosene for degreasing;
• primer (for better bonding of the paint layer and the surface of the equipment);
• masking tape, film, scotch tape;
• newspapers to cover the floors;
• respirator;
• gloves;
• paint;
• brush and roller.

Having collected the materials, you can get to work.

Preparation process

As already mentioned, painting in a different color should be carried out from the preparation of the refrigerator surface. Therefore, follow the suggested scheme of actions:

• for safety reasons, disconnect the equipment from the power supply, also remove the internal shelves and partitions, especially if you also paint inside;
• through detergents and an abrasive sponge, thoroughly clean the surface and rinse off the applied solution. It is not enough just to clean the refrigerator, you also need to thoroughly wash off the chemical compounds;
• sand the surface with sandpaper, partially removing the old coating. Rub it most carefully in places where there are already cracks and chips - here the old paint layer is already gradually leaving, so it is necessary to remove it so that in the future it does not cause damage to the new coating;
• wipe the refrigerator first with a cloth dampened in water, then dry. This is how you remove the particles old paint, which also should not remain on the surface;
• treat the refrigerator with a primer;
• glue the handles and other accessories with tape or wrap with plastic. Masking tape can be used to close the rubber band on the door and other parts that should not be painted. Also, if you are going to stick to a geometric pattern, then masking tape is the perfect assistant in this;
• cover the floors with newspapers and, if necessary, walls;
• test the paint on a small area of \u200b\u200bthe refrigerator. Evaluate if the color suits, how the paint is applied, etc.

Painting process

After completing the preparatory work, the most important thing remains, to paint the old refrigerator. If you have chosen cans of paint for this purpose, you must follow the instructions for it. General recommendations on the use of this type of paint:

• when applying, keep the balloon at a distance of 30 cm from the surface to be painted;
• movements should be uniform, from left to right, without lingering for a long time at one point, otherwise this place will be noticeable later;
• paint in 2-3 layers, but each of them should dry out, and only then the next one is applied.

If your choice fell on paint in a can, then you will need a brush or roller. Sharp color transitions at the bottom and at the top will lead to an unattractive result. Move systematically from left to right. Painting is done in 2-3 layers, each of which must also dry.

As you can see, there is nothing difficult in updating the appearance of a working refrigerator with your own hands, even a person who does not have the proper experience can cope with this task. The main thing is to follow the recommendations for the choice of materials and the sequence of actions, and then the result will delight for many years!

Sooner or later appearance household appliances spoils, and we have to figure out how to paint the refrigerator at home. Of course, it won't look as good as new, but we can radically change its design.

This opportunity should not be missed, therefore below we will describe the key stages of the process of restoring the appearance of the refrigerator.

Tools and materials

Choice of paint

The first and most pressing question is - what paint can be used to paint the refrigerator?

The only correct answer to it, of course, is not, therefore, you will have to choose from several options:

• Initially, refrigerators are painted with enamel paints, and therefore it is quite logical to use them to restore their appearance. Moreover, for work, you can use both enamels in cans and car paints in aerosol cans.
• The advantages of enamels are quite a few: it is high-quality adhesion, and durability, and pleasant ... As for the disadvantages, they are associated with a fairly high toxicity of solvents.

Note!
Car enamels usually contain components that provide resistance to weathering.
For our purpose, these substances do not play a special role, so you should not overpay for ultra-resistant paint.

• Epoxy paints... In terms of their performance characteristics, these pigments are almost identical to enamels, but the process of their application is more complicated. In addition, the price of a quality epoxy is quite high.
• Acrylic blends... Since a fairly small amount of paint is needed for our purpose, the choice in favor of acrylic may well be considered a budget solution. According to their characteristics, acrylic pigments are inferior to enamels, but for the operation of the refrigerator at home, they have enough strength and durability.

Note!
Another plus of acrylic is a wide palette.
If you are planning to implement original decor, the issue of color matching can become quite acute, so acrylic will be a good solution.

• When choosing which paint to paint the refrigerator, do not forget about the restoring compounds. If the walls of the product are touched by rust, electrically conductive Zinga paint or other materials containing granules of zinc or aluminum will help prevent the development of corrosion.

What are we going to paint with?

Each option has both pros and cons:

• longer, and the surface quality may turn out to be slightly worse.
• On the other hand, using a roller and brushes for fine decor will allow us to do the job more accurately, avoiding paint on the floor and walls.
• it is advisable if it is possible to either take the refrigerator out to a sufficiently large open space, or completely protect the environment from pollution. The result of using a spray gun is a thin, uniform coating.
• Nitro paints are usually applied with a spray bottle, but for small areas it can be replaced with an aerosol can.

Note!
Fire retardant paints for metal Polistil and other similar products can also be sprayed with a spray gun.
True, using them to restore the refrigerator cannot be called justified, so it is better to use more suitable compositions.

• If you plan to combine colors, then you need to use plastic wrap and masking tape to separate the areas. You should not use ordinary adhesive tape: the glue leaves traces on which the paint then does not adhere well.

Coloring technique

Site preparation

Before repainting the refrigerator, it must be carefully prepared.

This is done like this:

• We turn off the device and move it to where the painting will be done. Naturally, all food must be removed from the chambers!
• We remove all the accessories, and if this is not provided for by the design, we close those parts that do not need to be painted with masking tape.
• Thoroughly wash the surface of the refrigerator using an anti-grease cleaner. After washing, dry the device.

• Rusty areas and the place where paint is peeling from the base, clean and grind. If necessary, we perform leveling with a quick-hardening filler.
• We treat the refrigerator with a degreasing agent.

When the degreased surface is completely dry, you can start painting.

Refrigerator decoration

Painting instructions include the following items:

• Before starting work, we protect the floor and walls from drops by laying newspapers and laying polyethylene.
• We glue adhesive tape on the degreased surface, marking the boundaries between the painted areas.
• Spray paint from a bottle or spray bottle evenly from a distance of about 30 cm. Move the nozzle from top to bottom so that no drips remain.
• If a roller is used, then we collect a small amount of paint on it and move with vertical strokes.

Advice!
To find out how the paint will lay down, we start processing from the area that will face the wall.

• After processing, dry the paint. The time depends on the composition: from a few minutes for nitro paints to two to three hours for acrylic paints.
• We carefully examine the painted surfaces. If necessary, we carry out re-painting, eliminating all defects.

As for the decor, it can be applied in several ways:

• The most common technology is surface finishing with vinyl decals. They perfectly mask defects and can radically transform the appearance of the entire kitchen.

• You can also paint the front of the refrigerator with acrylics. True, to protect the drawing, it will need to be varnished.

Output

Recommendations on how to paint the refrigerator with your own hands should be carried out as accurately as possible, otherwise the applied paint will begin to flake off rather quickly and the work will have to be repeated. The video in this article will help you master the restoration technology, so we advise you to carefully study it before painting.