Technical documentation lg hausys pvc profile definition. LG Chem windows - windows with which you can relax! Maximum profile steel reinforcement
All plastic windows must fulfill their functions, and therefore window structures designed to meet all requirements. But quite often, as it turns out during installation, not all windows reliably perform their functions. The reason lies in the fact that the sample of windows may differ from the production batch. Also, it can be errors made during installation or errors in production. But are you looking for reliable windows that you want to be 100% sure of? Then you should pay attention to LGHAUSYS windows.
Plastic windows LG - high quality and manufacturing technology
LG PVC windows are an excellent choice if you want high-quality windows at a low price. The technology of manufacturing windows, as well as high hermetic characteristics, will make it possible to produce windows at the highest level. The quality of the windows will not depend on the manufacturer itself, as well as on the installers who will install the windows. In addition, LG windows have some other advantages:
1. Environmentally friendly materials. All profiles have a hygiene certificate, which confirms this. Moreover, the certificate is issued for all materials from which plastic windows are made.
2. LG windows have additional special seals. This allows you to protect the house from the most severe frosts, from wind and drafts. Windows are perfect for our region.
3. High degree of weldability of windows ensures longer service life. Windows can last for decades.
4. The high quality of the windows allows them not only to be used for a long time, but also to preserve the original appearance of the windows. They will be the same color as when you bought them, they do not need additional care.
Would you like to order LG plastic windows?
Then we can help you! We are manufacturers of plastic windows, we have a certificate for the production of windows of this brand. We can provide all certificates of hygiene, as well as the official manufacturer. We have a low price for our products, as we are a manufacturer and work without intermediaries! If you have additional questions, call us, we will always help you!
LG has vast experience in polymer development. Six research institutes of the company are constantly working to improve the quality of products and their consumer properties. Unlike most window companies, LG Hausys uses a full production cycle, from the manufacture of PVC resin and other source materials. This allows you to achieve high quality products at an affordable price. Thanks to this approach, LG Hausys window systems quickly gained recognition around the world, and the company became one of the leaders in terms of output and quality of PVC profiles.
LG Hausys L-600 is one of the best PVC profiles in its class. The window system was developed specifically for Russia, taking into account our climatic features. With a standard 60 mm width of the window system, the number of air chambers has been increased to 4, which favorably affects the soundproofing properties.
Special attention deserves the plastic from which the PVC profile is made. Excellent rigidity and toughness, ideal White color with a matte finish, plastic resistance to extremely low and high temperatures. Affordable price PVC profile will pleasantly surprise you.
 |
LG Hausys L-700S (ElGee L-700S) |
|
|
|
|
When developing the PVC window profile LG Hausys L-700S, the focus was on the unusual and interesting design window system. original form doors with wide bevels and glazing bead in antique style. Metal-plastic windows from the LG Hausys L-700S profile will become great solution for houses of the old fund and houses of "Stalinist construction".
Like all LG Hausys window systems, the L-700S metal-plastic profile is equipped with an EPDM rubber seal. Compared to a conventional seal, it is more resistant to aggressive environmental influences and has an extended service life. The contours of the seal made of EPDM rubber remain elastic for a long time and provide a tight hold of the sash to the frame, which helps to avoid drafts and blowing.
LG Hausys L-700 (ElGee L-700) |
||
|
|
|
Five-chamber window profile with increased sound insulation and energy saving. Despite the fact that the window system belongs to the premium class, it has a fairly reasonable cost. Metal-plastic profile LG L-700 is perfect for glazing private country houses with its own heating, where the issue of energy saving plays an important role.
Windows LG Hausys specifications. Comparison table of plastic windows LG Chem.
| Characteristic | LG Hausys L-600 | LG Hausys L-700S | LG Hausys L-700 |
| Construction depth of the profile, mm | 60 | 60 | 70 |
| Number of air chambers | 4 | 3 | 5 |
| Maximum glass thickness | 32 | 42 | 42 |
| Heat transfer resistance coefficient, R0pr | 67 | 71 | 78 |
| Sound insulation class, VDI 2719 | II - IV class, up to 40 dB | II - IV class, up to 44 dB | II - IV class, up to 50 dB |
| Hardware group | Siegenia AUBI Favorit (Germany) | ||
| Guarantee | Warranty for metal-plastic profile 40 years from the manufacturer | ||
| Certificates | Certification Ral, DIN, ISO, Rostest certification | ||
|
Compare metal-plastic windows LG: |
South Korean firm LG household appliances, very popular in Russia. However, not everyone knows that it is a subsidiary of LG Chem, which is engaged in the production of polymers and plastics. LG Chem also produces window profiles from finishing materials LG Hausys. This is what we want to tell you about.
LG Hausys in Russia
Since 2005, both LG Chem and LG Hausys have been selling profiles in Russia. It is the same.
Warehouse of LG Chem
In 2010, a plant for the production of LG profiles in Novokuznetsk began work, a year later another one was launched in the city of Elektrostal near Moscow. Since LG CHEM produces polyvinyl chloride, window profiles, even at Russian factories, are made from their own raw materials.
LG Hausys has developed a special line window profiles especially for the climate of our country. It complies with Russian GOST. In the Korean version, the profile has three, and in the Russian version, four air chambers. Therefore, when correct installation freezing of windows is impossible even in severe frost.
Color window profiles dominate in Korea Ivory, in Russia - white. Although you can choose any other color to cover the frame.
Description of profile models
Unlike European companies, LG Hausys standardly produces glossy profiles, not matte ones. Of course, this makes it easier to care for them in terms of cleansing.
L-600
Window profile LG Chem L-600
This profile meets the highest requirements for sound insulation and thermal insulation, because it has four air chambers. In addition, all profiles of this company have a slightly beveled fold, so the sashes seem to be superimposed on the frame. This makes the window even more airtight.
The profile width is 60 mm. The thickness of the double-glazed window when installed in the frame is 34 mm.
A double-circuit seal prevents dust and drafts from entering the room.
Reinforced reinforcement gives the profile strength. And if you also order anti-burglary fittings, you can create a very reliable protection from hacking.
Exhibition stand of LG Chem
Heat transfer resistance has a coefficient of 0.68. This indicator corresponds to the Russian GOST.
The rounded drainage with an inclination angle of 10 degrees carries out both condensate removal from the inside and rainwater from the outside.
Strict clear profile shapes are not for everyone, although they look ultra-modern and stylish in any interior. And the glossy almost mirror surface of the profile will always look beautiful and fresh as new.
The profile price is from 6600 rubles without installation for a standard window.
L-700
Profile LG Chem L-700
This model of window profiles is in many ways similar to the previous one: the same double-circuit sealant, the same U-shaped reinforcement. But he has a number of properties that are superior to the L-600. For example, he has more air chambers - five. And the heat transfer resistance coefficient is 0.91. All these qualities make it possible to use the L-700 profile even in the Far North.
A double-glazed window with a thickness of 42 mm increases the soundproofing properties of the profile. So to speak, it makes it possible to listen only to what we want to listen to.
The mounting width is 70 mm. Outwardly, this profile is not similar to its "brother" L-600. It has soft smooth lines, more familiar to Russians. But the plastic is all so glossy and snow-white.
For the price, the profile will be only slightly more expensive than the previous model. The cost of a standard window is from 7200 rubles without installation.
Premium German brand on the Russian market since 1995. With VEKA you get real German quality from a company with a 48-year history around the world.
- ALL profile systems of the highest class "A"
- ALL are frost-resistant and marked with the letter "M"
- ALL have maximum 4-sided steel reinforcement
- Uniform quality standard regardless of the country of production
The more air chambers, the less air exchange and, accordingly, the higher the thermal insulation.
The wider the profile and the greater the installation depth, the higher the thermal insulation.
Profiles ONLY top class "A"
According to the thickness of the inner walls, ALL of our profiles are of the highest class "A" - the thickness of their front wall is at least 3 mm.
- class "A": front wall not less than 3.0 mm
- class "B": front wall not less than 2.5 mm
- class "C": wall thickness is not standardized
Please note that 80-90% Russian market these are classes "B" and "C" and only 10-20% of class "A" profiles. At the same time, VEKA's product range contains ONLY A-class profiles.
As a matter of principle, we DO NOT use profile systems of classes "B" and "C" (with a front wall width of less than 3.0 mm).
ONLY frost-resistant profiles
According to GOST 30673-99 “PVC profiles for window and door blocks”, in terms of resistance to climatic influences, ALL of our profiles are “frost-resistant” - for areas with AVERAGE monthly air temperature in January BELOW minus 20 ° С.
GOST standards for different classes:
- normal version "N": the average temperature in January is minus 20 ° C and above
- frost-resistant version "M": the average temperature in January is lower than minus 20°С
In our assortment ONLY frost-resistant profile systems, marked with the letter "M".
Heat transfer resistance (thermal heat resistance) is the main coefficient of thermal insulation. It is determined by the ratio of the temperature difference outside and inside the room to the heat flow passing through the window. The higher this number, the better the thermal insulation efficiency.
Evolutionary double-glazed windows SmartGlass 2.0
Our multifunctional double-glazed windows work for you both in winter and in summer. In winter, sputtering of silver particles saves up to 90% of the heat energy of heating devices, and in summer a double-glazed window reflects 25% more solar heat than ordinary plastic windows.
- 42% more HEAT in winter (energy saving properties)
- 25% less HEAT in summer (sun protection properties)
All our double-glazed windows contain special energy-efficient glasses. We DO NOT use conventional glass even in the most basic configurations.
AirDrive I, II and III climate control systems
Optimal ventilation mechanisms are built into the windows - the sashes open slightly by 1-5 mm, depending on the selected mode. Is not external devices(combs or valves), namely BUILT-IN furniture ventilation.
Three options:
- AirDrive I: night ventilation (1 mode)
- AirDrive II: discrete multi-stage ventilation (3 modes)
- AirDrive III: discrete multi-stage ventilation (5 modes)
We try not to put combs because of them appearance(only at your request). In principle, we do not use valves due to the fact that they violate the integrity of the window, reduce its tightness and strength (since the profile and its reinforcement are drilled through).
MAX steel profile reinforcement
Reinforcement is a steel frame inside a PVC profile. This is what gives it rigidity. The more steel and stiffness angles, the more reliable the window geometry.
Types of reinforcement:
- Square - 100% reinforcement on 4 sides, 4 stiffeners (maximum)
- U-shaped - 75% reinforcement on 3 sides, 2 stiffeners (normal)
- L-shaped - 50% reinforcement on 2 sides, 1 stiffener (very, very bad!)
All our profiles are reinforced to the MAXIMUM - from 4 sides and always with 4 stiffeners.
VEKA technologists managed to achieve a compromise between the unpretentiousness of a matte texture and spectacular gloss.
Pleasant shine and low sensitivity to external influences are the most noticeable feature of our window systems.
The VEKA profile complies not only with the Russian GOST, but also with the European building standard RAL.
