Accessories Axor: customer reviews, product quality, manufacturer, features of installation and use. Adjustment of fittings Installing axor fittings on a window technical guide
Ideally, they should be your reliable and insurmountable protection from the cold. And the first few years after the installation of new windows, this law, as a rule, is unquestioningly observed. However, sooner or later, each of us will still face common problems such as window freezing in the frosty season, breakage of a balcony or window handle, unauthorized penetration of cold air into the room due to poor closing of the sash, and so on. No, this is not evidence that the window structure has become unusable. If everything is done correctly, it will faithfully serve you for many more years. Knowledge and simple skills will help to adjust the window and again make it the guardian of a comfortable temperature regime in the house. And thanks to the high quality of the manufactured products, it will allow to delay the problem period in the operation of window systems.
We switch windows to seasonal mode of operation: summer / winter
(You will need: 4mm hex key)
The degree of how strongly the window sash is pressed can be independently adjusted. It is logical that in winter, the degree of pressing of the window profile sashes should be maximum - in order to prevent cold air from entering the apartment. In summer, Steko experts recommend loosening the pressure on plastic windows in order to prolong the life of the rubber seals and let more fresh air into the room.
However, before proceeding with any manipulations regarding the mechanism, they must be treated with WD-40 spray lubricant. Unlike machine oil, which is much more commonly heard of, spray lubricant does not attract dust and, thanks to a special thin tube, allows you to easily reach the parts that need to be processed. hard-to-reach places. This little secret professional installers Steko will simplify the small window repair and ensure a long service life of the mechanism.
Now about the main thing: how to recognize clamps?
These components of PVC windows are located along the perimeter of the sash. They are responsible for ensuring that the sash fits as tightly as possible to the frame. The clamps are in the form of eccentrics and in order to adjust the clamp, it is necessary to resort to rotating the eccentric using a 4 mm hexagon.
For transferring fittings in winter mode it is necessary to turn the eccentrics with a mark into the room. The mark is the thickest place on the eccentric.
- To go for summer mode the shortest radius of the eccentrics should be turned towards the room.
Ideally, the adjustment of the plastic window should be carried out by a Steko specialist. Otherwise, you will not be able to insure yourself against damage to the window system in case of an error in the process of adjusting the fittings.
Repairing a window handle
If pressure adjustment plastic windows required no more than twice a year, then emergencies associated with a balcony or window handle can occur much more often. Let's look at some of the most common situations and solutions to them.
Problem number 1: the handle is loose
You probably know this unpleasant sensation when the handle, instead of holding tightly, walks when pressed with a shaker. Loose handles in plastic windows can be adjusted by tightening their fasteners. You should not call a specialist to perform this manipulation - you can easily do this work yourself. Pay attention to the rectangular pad, which is located under the handle and is installed in a vertical position (as a rule). With your hand, pry this pad a little from above and below, and then turn it 90. After that, you will see two bolts that must be tightened with a Phillips screwdriver.
Attention! In no case do not pry off the edges of the lining with a screwdriver or any other tool, as this can lead to damage to the profile and deformation of the plug.
Problem number 2: the handle is broken and needs to be replaced
(You will need: Phillips screwdriver)
Let's make a reservation right away that minor repairs to replace broken handles with plastic windows occurs in exactly the same way as the installation of the handle with a fuse. Steko recommends installing lockable handles or child locks on the windows of rooms where the younger generation is present. The first device will not allow you to open the window in principle, and the second will not give the baby the opportunity to open the window wide open, but switching the sash to the ventilation mode is easy.
The repair process starts, again, with the lapel of the plug and the unscrewing of the two bolts located under it. Next, you need to move the handle very carefully from side to side, and then carefully remove it. The new handle is inserted in place of the one just removed and tightened with the same bolts.
Problem number 3: the handle is jammed
Often, the handle installed on the window profile gets stuck. If something like this happened to you, do not rush to sound the alarm: change window fittings there is no need. Let's say more: to carry out this minor repair, you don’t even have to remove the handle. The reason why these things happen is quite simple: the locking mechanism does not work properly. You can deal with the problem easily and simply: to adjust the plastic windows, it is enough to manually move the lock lever by 2-3 mm, thus freeing the movement of the window handle.
0
2018-10-24 09:45:00 +0300
CompanyAXOR INDUSTRYon the page of her official profile on Instagram in the section "AXOR_staff" (stories about people who determine the success of the company), she congratulated Alexei Belozerov on his anniversary and shared the secrets of his professional success and the achievements of his team. What determines the success of a leader and his team? How to achieve high goals? What really motivates and empowers? The answers to these questions are known to strong personalities, hardened by success and solving complex problems. Today, the issue of the “AXOR_staff” column is dedicated to Alexey Belozerov, Sales Director of TM AXOR in Eurasia. And timed to coincide with his birthday! We will tell you about the secrets of his professional success and the success of his team, thanks to which AXOR is now represented in more than 16 countries around the world and continues to develop in the global market. Alexey's career in the corporation began as a territorial manager. The results of his work in the first years are an increase in sales in the region by almost 10 times. Further there were new regions, new countries, new projects and new achievements. Alexey's track record in AXOR INDUSTRY today: AXOR is actively developing new markets and in this regard, Alexey is already in charge of promoting products in Chile, Israel, Portugal and India. The secret of Alexey's success is high efficiency, easy learning, perseverance, strong leadership skills, high analytical skills, constant striving for new victories and achievements. Alexey's favorite motivating phrase: "Either you want it and it will be, or you don't really want it." “A strong team is the key to success,” Alexey often repeats. Therefore, he treats his team with great attention and emphasizes: “The main thing is not to manage, but to direct!” “A successful person should have a hobby” is another of his catchphrases. Alexei is hunting and fishing. They give him the necessary reset and incentive for new victories. And, of course, his beloved families and children give him support and inspiration. Today is Alexei Belozerov's 35th birthday! Congratulations to our colleague on the holiday! We wish you new ambitious goals and new achievements, joy and pleasure from life. May there always be the support of relatives and friends, as well as a beloved and reliable team! Thank you for your contribution to the development of TM AXOR! Portal OKNA MEDIA recommends: AXOR presentation at the open seminar "Energy efficient window constructions"
We work with original fittings from trusted manufacturers, which allows us to achieve the highest possible results. Most often, the convenience and smooth functioning of the window depend on how its fittings are adjusted.
You can talk about its need in the following cases:
The sash stopped closing
To close the sash, you have to make serious efforts,
When closing, a creaking sound is heard,
To close the sash, you have to lift it,
Parts of the fittings come into contact with a distinct knock.
Unfortunately, few people pay attention to most of these problems. Appeal to us should be only when the window began to blow. And this sign indicates that the loose profile needs to be debugged.
How adjustment is made
This process has a certain algorithm, which is very important to adhere to. Our experts strictly follow all the requirements, which allows them to achieve excellent results. If you still want to adjust the fittings on the window yourself, it will be useful for you to know that the sash pressure needs to be loosened in the summer and compacted in the winter.
For adjustment, you need to find the locking pins. It is easy to detect serifs on them, this is a kind of indicator. A 4mm hex wrench will help reposition the trunnions. At the same time, the direction of the indicator inside the room indicates a tighter pressure. Accordingly, when weakening, the indicator shows the opposite direction.
IMPORTANT! Even if there is cold ahead, do not press the sash all the way. This will not have the best effect on the seal and may render it unusable.
Axor fittings are carefully thought-out products designed to meet the needs of manufacturers as much as possible. plastic double-glazed windows and end consumers. This fitting allows you to comfortably and easily manage window structures, and this ensemble of advantages is complemented by the quality and ease of installation of fittings.
Often, the cost of window structures on the websites of online stores and company catalogs is indicated taking into account the price of fittings, which depends on its quality, technologies and materials used in the production of components. You can choose any of the hardware options, but in their reviews of Axor hardware, buyers mention that this the best option of the models on the market.
The activities of the company and the series of accessories Axor
Axor Industry is one of the most successful companies in the industry and is active in last years. The history of the company is estimated at 10 years of continuous improvement.
Production facilities and the main office of the company are located in the city of Dnipro. This is a Ukrainian brand offering exclusively quality products- components for window and door products. Careful development and taking into account the slightest wishes of users, as well as operational features, make the products the best on the market. Therefore, in their reviews of Axor window fittings, buyers describe the optimal combination of price and quality, as well as excellent product reliability.
During the existence of the company it was possible:
- establish own production;
- confirm the quality of products that strictly comply with standards;
- earn the trust of customers and enlist their loyalty.
The brand's catalogs include two popular series of Axor window fittings.
ComfortLine K-3
Products that are distinguished by reliability and functionality of mechanisms at an affordable price. They belong to the economy class fittings segment. Suitable for use on all types of metal structures, as well as internal doors. The main feature of this series of fittings is a reinforced loop group. It provides functional and safe use even with metal-plastic systems weighing up to 130 kg. Reviews of Axor K 3 fittings, which users leave a lot, deserve special attention. 90% of consumers who have chosen this series of fittings write that Aksor products deserve special attention, as they correspond to all the declared characteristics.
SmartLine S+
This series of fittings is characterized by increased functionality and security. By default, the mechanisms are equipped with a microlift, blocker, anti-burglary lock. In addition, an option of additional equipment is available.
Technological approach to the development of fittings
When developing its products, Axor Industry sets itself the task of producing not only fittings with improved performance, but also making it so that the installation of parts into finished products is extremely easy and fast. With this in mind, the company is constantly working to improve and develop even more functional fittings for doors and windows.
The result of this approach is manifested in the manufacturer's innovative solutions that make it possible to improve the assembly quality of window packages, which means comfortable and long-term operation of translucent structures.
Some technical details of fittings, evaluated by craftsmen
Among the advantageous differences highlighted by craftsmen and installers based on reviews of accessories for Axor plastic windows, the following technical details:
- Reliable fixation of fittings long before screwing in the self-tapping screw. This prevents displacement during fastening with a self-tapping screw or screw.
- Strong fixation of the support pin, which simplifies installation when working with a screwdriver.
- It is not necessary to screw the lower hinge of the sash, self-locking is ensured without additional fasteners.
- The reinforced frame is prepared for installation, as the manufacturer assumes the presence of all mounting holes for attaching fittings.
- The connection of the scissors and the middle lock is reliable, which does not allow any kind of damage during operation in the place of this structural unit.
- For the manufacture of the locking plate, a special patented alloy is used, which is reliable, but at the same time remains absolutely safe for human health.
In fact, the list of hardware features is not limited to these qualities, as buyers write in their reviews of Axor hardware, these are just a few of the main characteristics that attract special attention when choosing accessories for window panes. Let's talk about the rest in more detail.
Accessories "Axor": what buyers say
Axor - domestic fittings of international class. Buyers in their product reviews note that the declared quality is indeed such. These are completely thought-out mechanisms designed specifically for use in our climate.
Among the qualities that buyers note are the following characteristics:
Hardware Features
Long-term experience and success of the company is ensured not only by the manufacturer's statements, but also confirmed by reviews of Axor fittings.
The main goal of the manufacturer is the maximum quality of fittings and maximum affordable price for products. Among the benefits that most often fall into the field of view of experts are the following qualities:
- reliability;
- durability;
- the quality of the final product;
- aesthetic design;
- hardware functionality.
According to the company's developers, a combination of three qualities is ideal in creating fittings, including:
Therefore, production is in continuous improvement, which makes it possible to open new horizons in the production of products, introduce innovative solutions in order to make it even better, as buyers write in their reviews of Axor fittings.
Choose only quality products, pay attention to specifications, certification and compliance with standards, but the most important thing, and probably the first on this list, is to pay attention to the reviews of real buyers, because they will help you make a choice. When buying, you should focus on the positive and negative qualities of the product, if any.
