Cast iron bath, according to masters involved in repair work professionally, is the most durable accessory. However, there comes a time when it needs to be replaced. Many owners of old baths try to delay this moment as long as possible, covering the product with new layers of enamel for this. Some people approach this issue radically. This category prefers to completely remove old bath from home, not her place to install a new one. It can be dismantled with or without preservation. Having tried to take out this accessory whole, beginners face difficulties and wonder if it is possible to break cast iron bath. Or do you have to take it out whole? In this case, you have to hire a brigade or call someone to help.

How to break cast iron This question becomes very relevant for those who decide not to use the old accessory anywhere else. This task will be easy to deal with. For information on how to quickly break a cast-iron bath, you will find in this article.

About dismantling methods

There are two ways to replace an old bath:

With preservation. The bathtub is carefully disconnected from the rest of the communication in the house and taken out. It can be used later. Judging by the reviews, this method is complex and laborious.
Without saving. In this case, you can both break the cast-iron bath and cut it with an angle grinder. Pieces of the tub are then taken out. Due to the fact that the product now weighs much less, one person can cope with this work. As they say experienced craftsmen, if necessary, to carry out mainly resort to this method. The disadvantage of this method is that the procedure is accompanied by a very large roar.

What is the peculiarity of the method?

According to reviews, it can be concluded that the procedure for breaking a bathtub with a sledgehammer is the most proven method of dismantling in practice. However, it requires a lot of physical effort. To destroy the bath into several parts is not available to everyone. The work must be done by a physically fit person. In addition, the procedure itself should be done during the day. Otherwise, a scandal with neighbors is inevitable.

Preparation

Before proceeding with the dismantling, you need to prepare the room in which the work will be carried out. It is desirable that there is nothing superfluous in the bathroom, namely various cabinets and bedside tables. In order not to damage the toilet, if the bathroom is combined, it is better to remove it from the room as well. The floor must be covered with a rubber mat. Otherwise, the cast-iron product laid on the tiled surface will slip.

Tools

Since the bath will first of all need to be disconnected from the pipes, the master needs to acquire the following:

Adjustable and regular wrenches.
Screwdrivers.
Pliers.
Hacksaw for metal and grinder.
Crowbar.
Sledgehammer.

In view of the fact that rough physical work will be carried out, the master should take care of the means of protection. It is necessary to prepare special gloves and goggles.

Where to start?

Before you break the cast-iron bath, it must first be disconnected from all communications. The first step is to disconnect the overflow. According to experts, cast-iron pipes were installed in many old houses. Therefore, after many years they rust heavily, become covered with scale, and the master may have difficulty dismantling cast-iron plumbing. The situation is better if communications are represented by metal-plastic components. In this case, they simply unscrew. It is enough for the master to prepare only pliers. It is not uncommon for the overflow grate to stick strongly.

Before you break a cast-iron bath, you need an element. Many craftsmen clamp it with pliers and scroll counterclockwise. If it is not possible to dismantle the overflow in this way, it is cut off with a grinder. Judging by the reviews, fasteners often have heavily rusted threads, which can be dealt with only after they are cut. First, several cuts are made on the grate, and then the overflow is knocked down with a chisel. Then a cross is knocked out under the grate. As a result, the siphon should hang freely, connected to the rest of the sewer communication. To remove it, the master needs to get rid of the coupling. Some beginners are wondering if it is possible to break a cast-iron bath with a sledgehammer. According to experts, it is quite possible to do this. It is only necessary to adhere to a clear sequence of actions.

About the weak point of the bath

For those who have never done anything like this before and do not know how to break a cast-iron bath with a sledgehammer, experts recommend finding its most vulnerable spot in this plumbing product. Judging by the numerous reviews, it is located at the bottom, namely near the drain hole. That is where you should hit with a sledgehammer.

Progress

After the product has found its most vulnerable point, the following steps must be performed:

First of all, the bath should be slightly moved away from the wall. To complete this task, you will need a chisel and a hammer, with which the plumbing product is relieved of cement mortar along the perimeter. The optimal distance of the bath to the wall will be from 100 to 150 mm.
Using an angle grinder equipped with cut-off wheels, several cuts should be made on the bath. The task of the master is to deprive the product of strength. The places of cutting on the bath should be its curved edges on both sides. They are used as If the work is done correctly, then from strong blows to the bottom of the cast-iron product, it will develop.
Break the drain hole. At this stage, the bath does not need to be turned over. The master only applies very strong blows with a sledgehammer to the drain from the inside of the bath. Judging by the reviews, after these actions, the bath is divided into two separate halves. If this did not happen, then it will happen to deal with its sides.
Turn the tub on its side and cover with old rags. Burlap is also fine. Blows are applied to the outer part of the cast iron product. As a result, the previously broken drain hole in the bathroom should turn out to be even more expanded. After several blows in the tub, a long strip forms along its entire bottom.

Completion

At the very end, the cast-iron bath must be completely turned over. The bottom of the sanitary ware should be directed upwards. At this stage, the sides are processed with a sledgehammer. As a result, the bath is broken into several pieces, which will then be convenient to take out. In addition, the bath can be divided into smaller pieces. To do this, you have to work as a grinder. The gas cutting method is considered quite effective.

For those who do not know how to break a cast-iron bath, professionals recommend adhering to safety precautions. Mostly this work is done by two people. Since the procedure involves a grinder and a sledgehammer, you can protect yourself from injury if all actions are coordinated.

Due to the fact that particles of broken cast iron can get into the face from strong blows of a sledgehammer, the plumbing product should first be covered with burlap. This will also protect the bathroom itself. The speed of dismantling and safety directly depend on the correct organization of work.

A cast-iron bath, along with its strength and reliability, has one significant drawback - a lot of weight. And when it comes to dismantling a cast-iron bathtub, the owners have to face a number of difficulties - pulling the product out of the apartment onto the street is not so easy, and in some cases, due to tight passages, it is completely impossible to do so. There is only one way out - to break the bath.

Ways to break a cast iron bath

In order to break a cast-iron bath you will need:

sledgehammer,
Bulgarian,
gloves,
reinforced bags for construction debris,
soundproof headphones (optional)
an old blanket or other soft material (optional).

It is customary to break a cast-iron bath with a sledgehammer. Of course, it is worth entrusting the matter to a man. Even a person with an average level of physical fitness, such a task is within the power. Keep in mind that you will not be able to quietly break the bath, so this work must be carried out during the daytime. If possible, warn the neighbors so as not to scare anyone or cause discomfort to anyone. Now, with a clear conscience, you can get down to business.

Before starting work, prepare a tool (sledgehammer), free up space around the bath, so that in the future it will be easier to collect fragments. If you're afraid to hurt flooring, lay an old blanket or soft cloth on the place of work. Be sure to wear gloves to avoid accidentally cutting your hands. As we said, breaking cast iron bath accompanied by a lot of bell-like noise, so it is advisable to have soundproof headphones.

To make the cast-iron bath easier to prick under the impact of a sledgehammer, cut its sides with a grinder in several places. If desired, you can divide the bath into several parts only with the help of a grinder. But this procedure is laborious, lengthy and is accompanied by a large amount of debris, or rather construction dust. Therefore, it is easier and more convenient to break a cast-iron bath with a sledgehammer.

5-6 persistent blows should be enough for the bathtub to break into at least two parts. If necessary, break large pieces again, then it will be easier and more convenient to take parts of the bath out of the apartment.

Carefully collect small fragments together with the remnants of tiles or other trim, if any, and pack in special reinforced bags designed for construction debris. So you can easily get rid of the old cast-iron bath.

Before you make repairs in the bathroom, you need to prepare the room. Dismantling a cast iron bath is the main issue that needs to be resolved. However, this process is quite laborious, so the removal of a sanitary ware involves several stages of work. In addition, the removal of a cast-iron bathtub is also an urgent problem in the process of repairing a bathroom.

Renovating a bathroom is not an easy task, because before you get a beautiful and updated bathroom, you have to work hard. First you need to answer the question of how to remove and where to put the old cast-iron bath.

Preparing a bathroom for renovation

It is necessary to fulfill the basic conditions for preparing the room for the upcoming repair:

removal of all bath accessories;
disconnection of communications;
removal of furniture;
dismantling of the old cast-iron bath and washbasin;
cleaning the room from debris and objects that may interfere with the work of specialists.

Dismantling of obsolete plumbing

How to break a cast-iron bathtub quickly and without loss of time? This question worries everyone who has ever thought about overhaul bathroom. Old cast iron bathtubs can be removed in several ways. The first of which is the free removal and removal of old cast-iron bathtubs.

Tip: There are a considerable number of special services that are ready to dismantle and remove a cast-iron bathtub in a matter of hours. Moreover, they are ready to provide such a service absolutely free of charge, but with the condition that they take the old plumbing with them. This is not surprising, because today the acceptance of cast-iron bathtubs for scrap metal is in great demand. Therefore, you can safely use the services of such organizations, for which you do not have to pay a penny.

However, not every locality has such initiative groups that are ready to carry out not only dismantling, but also the removal of a heavy cast-iron bath.

And yet, you should not despair, because there are many more ways that allow you to dismantle and remove the old cast-iron bath. For example, you can use the paid services of craftsmen who perform all work on the removal of plumbing, and from any material. As a rule, such enterprises have their own standard prices for services. And after your consent to dismantle the equipment, the repair team will arrive at the appointed time and remove the plumbing, in addition, they will be able to take out the cast-iron bath, but also for a certain monetary reward.

But if you are going to make repairs in your bathroom without the involvement of specialists, you will need to dismantle the cast-iron bath with your own hands. In fact, this process is not as complicated as it seems at first glance.

Self-removal of plumbing

This procedure will not cause complications if the old cast-iron bathtub has been placed on supports, without any fasteners, decorative screen or brickwork, well, and, of course, if the dimensions of the doorway allow you to take out the plumbing without first sawing or breaking it.

Tip: After dismantling, you can hand over the old cast-iron bathtub to scrap metal collection points, or simply leave it near the garbage cans. Believe me, there will definitely be no plumbing the next morning.

But if the product is installed in a steel frame or lined with brickwork, the dismantling process is somewhat more complicated. In this case, you will have to:

Shut off the water and disconnect the bath drain from the sewer system;
Then it is necessary to remove the mixer and all water distributors, because they will interfere with the process of removing plumbing;
When these nuances do not interfere with the process, you will need to arm yourself with a chisel and a sledgehammer. Using these tools, you will need to remove the tiles and skirting boards that cover the joints of the bath with the walls;
The next step involves the direct dismantling of plumbing. Using the lever, remove the obsolete equipment. If the equipment does not succumb to “provocation”, it will be possible to completely cut the entire structure with the help of an angle grinder with a metal nozzle. If the frame is made of bricks or blocks, use a sledgehammer;
When you finally finish with the frame, you will need to take out all the construction debris from the room. Then only the old plumbing itself should remain in the room. If you understand that because large sizes the product cannot be completely pulled out of the bathroom, you will have to break plumbing equipment into several parts.

How to properly destroy a cast iron bath

How to split a cast iron bath? Many video clips answer the question of how to break a cast-iron bath, so you should not have any difficulties.

Important! Please note that this procedure will be accompanied by a serious crash, so you should not start repairs at night looking.

First you need to put the old equipment on its side so that it has free access from both sides. Since pieces of cast iron will fly off the product during the process, which can injure your face and hands, be sure to wear safety glasses, a hat and thick gloves. It is desirable that the fans are also not in the room.
The most vulnerable spot in any bath is the part of the bottom next to the drain hole. It is on him that it is necessary to deliver strong blows with a sledgehammer. When hitting from outside the plumbing, cover the hole with a rag to prevent splinters of cast iron from hitting you. These manipulations should be performed until a large crack appears along the entire bottom.
Then the bath must be turned upside down and direct blows to the walls of the plumbing. After dismembering the equipment into pieces, invite your fans to help carry the remnants of the bath out of the room.

Get rid of unwanted baths

So, where to rent a cast-iron bath? Cast iron products, of course, are durable, but not eternal. Therefore, sooner or later everyone asks the question: where to take the old cast-iron bath? The dismantling of plumbing equipment is a very difficult process, but not final, because it becomes necessary to take out the old cast-iron bath.

But the fact that the disposal of an old cast-iron bathtub can bring not only troubles, but also a certain monetary reward is encouraging. Because the acceptance of scrap iron is carried out in almost all cities. If you have your own transport and during the dismantling process you had to break the plumbing into pieces, you can organize the pickup of cast-iron bathtubs, having previously decided on the place of receipt of scrap metal.

But if you do not have your own transport and it is problematic for you to rent an old bathtub weighing 150 kg, you can easily negotiate with special teams that will remove the equipment on their own, they certainly know where to put the cast-iron bathtub.

You just need to find ads at your place of residence and contact an organization where you can rent a cast-iron bath.

Conclusion

As you can see, the process of removing old plumbing can be solved relatively easily, but if you are also the owner of a cast-iron product, you need to immediately decide on the address of the enterprise where to hand over the cast-iron bath and get paid for it. Of course, if the plumbing equipment is not so easy to dismantle and take out of the bathroom, you will have to seriously sweat for some time, but the result is certainly worth it.

Add site to bookmarks

Kinds
Choice
Installation
Finishing
Repair
Installation
Device
Cleaning

How to break and take out an old cast-iron bath?

As a rule, a cast-iron bathtub is the most durable piece of every apartment. But sometimes in the process of repair it is required to replace it. Some try to endure it entirely, although this is a very difficult task, due to its enormous weight. Very often in our apartments there are such narrow passages that it is simply impossible to take out a bath because of its bulkiness. And after a little thought, you decide to break the tub and take it out piece by piece. Here the question arises: how to break a cast-iron bath? This article will give you the answer.

Start dismantling the cast-iron bathtub by removing the fasteners.

List of materials and tools:

Bulgarian;
sledgehammer;
bags for construction debris;
an old blanket or other soft cloth (put under the bathroom);
burlap or other durable fabric (cover the bath to reduce the impact force of flying fragments);
tight clothing, closed shoes, headgear, construction gloves, protective mask (to protect the body from flying fragments);
soundproof headphones (optional).

Technological process

First you need to disconnect the old bathtub from the fastening elements with which the bathtub was attached, and dismantle the drain. If it is not possible to disconnect the drain, it is cut off with a grinder. You should also remove all objects that may interfere with the dismantling of the bath (both under and above the bath), and remove the mixer. To dismantle the bath, the edge of which is embedded in the wall, you need to dismantle the legs of the bath (starting from the far ones) and, after that, pressing on it from above, “drop” it on the floor. Before dismantling an old cast-iron bath in this way, it is required to put some kind of soft material under it in a thick layer to soften the impact of the bath on the floor.

Breaking a cast iron bath will not be easy. This job requires strong man and a sledgehammer. Before proceeding with the demolition, it is necessary to clear the space around the bath, lay a soft cloth on the floor (to protect the floor), put the bath itself on its side so that it has free access from both sides. Scrapping a cast-iron bathtub is a rather dangerous job: there is a big risk of injury from flying fragments of the bathtub. To protect yourself from these fragments, you should wear thick clothing, shoes, a hat, construction gloves and a protective mask. To protect your ears from loud enough noise, you can wear soundproof headphones.

To minimize the risk of injury from bath shards, remove household members from the premises

How to break a cast-iron bathtub without applying extra effort? Most weakness tub is located near the drain. To break through it, a series of blows should be applied from the inside to the bottom near the drain hole.

Lay the tub on its side so it's easier to break.

After it turned out to break the bottom, the bath should be covered with burlap and struck with a sledgehammer, expanding the gap along the entire bottom. Do not forget that the bath should lie on its side during the entire process of breaking through the bottom, because. the vibrations of a bathroom that is upside down when the bottom is broken can cause plaster to fall in the apartment below you. All strikes must be applied from the side.

After you manage to break through the bottom, turn the bath upside down and continue to apply side blows to the walls, trying to break it into pieces. If necessary, large pieces can be broken into smaller pieces: the smaller the fragments, the easier it is to take them out of the apartment. At the end of the work, collect the fragments in bags: they can be handed over to the scrap metal collection point.

Start dismantling the cast-iron bathtub by removing the fasteners.

List of materials and tools:

Bulgarian;
sledgehammer;
bags for construction debris;
an old blanket or other soft cloth (put under the bathroom);
burlap or other durable fabric (cover the bath to reduce the impact force of flying fragments);
tight clothing, closed shoes, headgear, construction gloves, protective mask (to protect the body from flying fragments);
soundproof headphones (optional).

Technological process

The scheme of the structure of the bathroom on legs and brick

Breaking a cast iron bath will not be easy. This job requires a strong man and a sledgehammer. Before proceeding with the demolition, it is necessary to clear the space around the bath, lay a soft cloth on the floor (to protect the floor), put the bath itself on its side so that it has free access from both sides. Scrapping a cast-iron bathtub is a rather dangerous job: there is a big risk of injury from flying fragments of the bathtub. To protect yourself from these fragments, you should wear thick clothing, shoes, a hat, construction gloves and a protective mask. To protect your ears from loud enough noise, you can wear soundproof headphones.

To minimize the risk of injury from bath shards, remove household members from the premises

How to break a cast-iron bathtub without applying extra effort? The weakest point of the bath is near the drain hole. To break through it, a series of blows should be applied from the inside to the bottom near the drain hole.

Is it possible to split a cast iron bath. How to break a cast-iron bath: useful tips from experts. Remove old siphon

About dismantling methods

What is the peculiarity of the method?

Preparation

Tools

Where to start?

About the weak point of the bath

Progress

Completion

Ways to break a cast iron bath