Filling paintball cylinders with air. Filling paintball tanks. Paintball stations
Paintball is one of the most active types of recreation. And the more actively you play, the faster the pressure level in your tank drops. Without the proper level, the ball will not be able to reach its target. You will pull the trigger, but you will not get the expected result. To avoid this on the “battlefield”, it is worth checking the level of the gas mixture during breaks.
What are paintball tanks filled with?
Arriving at the playground, the first thing that catches your eye is a balloon-receiver. Paintball guns are filled from this cylinder. In practice, two types of gas mixture are used: carbon dioxide and air itself. Other mixtures are not advisable to use for paintball, because they do not have necessary qualities. It is also important to consider that filling a cylinder with air or nitrogen will have a completely different cost.
Most often you can find a regular one filled in cylinders. atmospheric air. The ideal ratio of oxygen and nitrogen gives excellent shooting performance from a paintball marker. The air is pre-compressed. This can be done at gas stations where there is a high pressure compressor. That is, it is clear that in domestic conditions, it will not work to “charge” the balloon. Depending on the air compression, different pressures are obtained in the cylinder: 3000 psi or 4500 psi. If we translate these values into atmospheres, it turns out that a pressure of 3000 psi corresponds to 204 atmospheres. In a paintball gun, you can always see on the pressure gauge the level of gas pressure in an aluminum cylinder. The marking of the pressure gauge bears the inscription x1000 and an arrow with numbers, from 0 to 5. Multiplying the number by a thousand, you will get the value in psi.
How to refill paintball tanks
Preparatory stage for refueling the cylinder
Usually, when playing paintball, only club employees fill the tanks, observing safety precautions, and also referring to the fact that the player should relax and have fun. However, if you decide to fill your tank yourself, then it is better to study in more detail some aspects of this process in order to organize full air tanks for yourself and your friends with the air of an expert!
You will need to approach the gas station, which includes cylinders-receivers. It is necessary to create an airtight connection between the game tank and the liquefied air tank. This is done with the help of a not at all bulky conductor, which is initially attached to the valve of the receiver cylinder. In addition to the conductor, the gas station contains other elements.
On the other side of the liquefied air tank is a foster. Foster is the second conductor. There is a very high pressure in the receiver cylinder, and if the air comes out with a poorly fixed nipple of the gun cylinder with a foster gun, then the cylinder can literally be pulled out of your hands. No one needs unnecessary trauma, especially during rest. To make this technical procedure correct, you will need to slide the top of the fosterer towards the filling bottle. With this action, you will expose the bearings, with the help of which the filler nipple of the game cylinder will be well fixed.
The next step is to return the previous part of the foster to its original position. This action will ensure a firm grip between the nipple and the balloon. Everything must be sealed and tight. This paragraph completes preparatory stage balloon refills.
Filling a paintball can
All conditions are met to let compressed air from the receiver cylinder through the nipple. Just one movement and you will hear a slight hiss, which will indicate the transfer of air into a small cylinder due to a pressure difference. The pressure will gradually equalize until the game cylinder is filled with air to capacity. The receiver valve is responsible for this movement. On average, 3000psi is enough for normal play. Therefore manual control of filling of a cylinder is necessary. If you fill it with air to the level of the maximum mark, then you can get some discomfort from the game - the balls will fly a little not where you aim. Also, do not forget that the balloon can be damaged if the air is over-inflated. In the event of such damage, material damage will be not only the game cylinder, but also the regulator of the receiver cylinder.
End of refueling
After looking at the arrow of the pressure gauge to the figure determined by the technical passport of the cylinder, it is necessary to begin to reduce the air supply. Then you need to manipulate the filling nipple of the cylinder, disconnecting it from the foster cylinder-receiver. The last point cannot be completed immediately.
You can't rush here. There is still the same pressure between the game tank and the station, in other words, there is air under pressure in the system. This will prevent you from simply picking up and disconnecting the cylinder. It is necessary to bleed the air by finding the lever or button (depending on the receiver cylinder), which is responsible for releasing air from the intermediate part of the system. By pressing the button/lowering the lever, you will hear the excess air escaping into the environment, usually from the back of the gas station. Only after this point can the fosterer be moved to its original position and the filling nipple removed. The tank is filled and ready for a new game of paintball.
Paintball is quite an active sport, where Consumables(balloons, air or gas) constantly require replenishment. If you need to fill the feeder with balls after each game, and in sports, and several times in one round, then the balloon is filled with air much less often. The rate of gas or air consumption directly depends on the intensity of the fire.
Today, in the clubs of our city, cylinders are filled with compressed air or carbon dioxide. Other variants of gases, if used, are only for the sake of experiment, without participation in public events.
A short course on refilling paintball tanks
In order to fill the cylinders with air, we need a receiver (station). Refueling should only be carried out by specialists who know the theory of refueling. It would seem, what could be difficult or dangerous? But difficulties and danger exist here, especially for those who do not understand the indicators on the pressure gauge.
The markings on the pressure gauge are made according to the psi standard. In the center is the number 1000, and in front of it is the multiplication symbol. This means that if the arrow points to the number 3, then this is not 3 atmospheres, but 200 (3000psi), which is high pressure in a balloon. Our club fills up to the point where the gauge needle points to 2.5 (2,500psi). This is enough to participate in 2 - 3 games.
Any filling station has a foster, which is needed to clamp the filling nipple. Be sure to secure the nipple and check the reliability. To do this, you need to remove the foster bracket, thereby releasing the bearings and start the cylinder nipple. After that, return the foster bracket to its previous position, which in turn will fix the bearings, and they will clamp the nipple.
The station is on an air tank, the nipple is well fixed in the fosterer, now you can fill an empty paintball marker tank. When you open the valve of the air cylinder, you will hear a hissing sound, this moves air from one vessel to another, under the influence of pressure. Carefully follow the pressure gauge needle and do not get distracted if you increase allowable rate, then you can ruin both the marker tank itself and the regulator.
After the desired value on the pressure gauge is reached, it is required to stop the air supply and disconnect the cylinder. If there are no problems with the first point, then there is one nuance with the second. Despite the fact that the air has been cut off, there are remnants of it in the gas station. While he is there, it is not possible to pull the foster bracket and remove the nipple. But this does not matter, a special hole with a valve for bleed was invented to remove residues. The valve is opened by pressing a button or a lever, depending on the model of the station. After everything has been bled, you can easily and calmly move the foster bracket and disconnect the nipple. This completes the refilling of paintball cylinders, and you can safely enter the game.
Carbon dioxide in paintball clubs is used much less frequently than air, and there are objective reasons for this. It makes no sense to list everything, you can name a few of them, these are the requirements for the storage, operation and transportation of carbon dioxide cylinders. Although carbon dioxide has good advantage in front of air, it is consumed in a smaller amount per shot.
Summarizing everything written above, it turns out that for refueling cylinders you need a filling station and some knowledge in refueling and safety techniques. Nothing without this.
In such an exciting game as paintball, constant refilling of cylinders is required - the main source of energy for the marker. It is on the strength of the gas (compressed air) that the paintball cylinder is filled with that the speed at which the ball will fly out of the barrel depends. Have you ever wondered how paintball tanks are refilled? Perhaps you have never asked such a question in your life, or maybe you don’t really need this information, however, if you are on this page, it’s probably not just amateur interest that brought you here.
Especially for those who think, then once to see how paintball cylinders are filled with gas is quite enough to do such a manipulation yourself - you are mistaken. You may have understood the basic principle of how a paintball tank should be filled, but without certain knowledge (and practice as well), it is not recommended to do this.
Learning... how to properly fill a paintball tank.
We won't bore you with the details of what's made of high strength composites or aluminium; that there are both disposable and reusable cylinders, that the latest paintball tanks are larger in size, and one of their refills can be enough for several hundred shots. Let's focus on the main thing. So that with each subsequent refueling of a paintball cylinder there will be no questions about how to fill a paintball cylinder in accordance with elementary safety rules, remember a brief guide to action that will help you do such manipulations yourself or give you the opportunity to control the work of a specialist who does this professionally.
- Screw one end of the gas station onto a large receiver tank, and the other end onto a “small” paintball tank. It is very important that the paintball tank is below the receiver and in a position with the back raised.
- Check if the valve to the cylinder being filled is open.
- Open the special valve of the receiver cylinder to fill the container with air.
As a rule, the refueling process lasts no more than 2-3 minutes. You can check how full the cylinder is by reading the pressure gauge on it.
And finally - take care of paintball cylinders. Do not hesitate if you notice deformations of the seals on the cylinders, ruptures or wear - change them immediately to avoid unpleasant, and possibly even dangerous situations. As in any weapon, in a paintball marker all the constituent elements and mechanisms must work smoothly and clearly.
We are pleased to offer a new service to our customers - refilling cylinders with air in the Shchelkovsky district of the Moscow region. Pneumatic weapons are highly valued all over the world, because they are accurate, reliable and powerful. But for the functioning of pneumatics, compressed air is needed. It is important that such weapons are constantly recharged. With each new shot, there is less and less air, which means that the pressure decreases. And although modern air rifles in most cases retain primary power until the last shot, refilling cylinders with air in the Shchelkovo region necessary.
Both hand pumps and high pressure cylinders can be used to charge PCP airguns. In the second case, it is important to consider that the cylinder has a higher pressure than the pneumatic reservoir. If the values are equal, then there will not be much sense in such a dressing. Although this option is possible (when the PCP pressure is comparable to the cylinder pressure), but the number of shots will be minimal. And with each such recharging, it decreases. We offer air filling of cylinders up to 300 atm – best option For:
- Pneumatics.
- Respiratory apparatus.
Filling cylinders with air must be completed in accordance with the rules. That is why it is so important to turn to professionals who will do everything as required by technology and safety rules. Need to refill air cylinders - contact us! We are always happy to help, complete an order and answer all customer questions.
We offer favorable terms of cooperation
Cylinders are filled with air that has undergone multi-stage purification. Our clients can have no doubts about the quality of the service, because we make sure that everything is in accordance with the rules.
Refueling of cylinders with air Shchelkovsky district carried out daily (we accept orders and work seven days a week). The price of the service will please, the cost is affordable:
- Refueling of small cylinders for PCP - 300 rubles.
- Refueling of large cylinders (40 liters) - 500 rubles.
We provide delivery if necessary. Refueling of cylinders with air in Shchelkovo will be produced quickly and efficiently. After all, you are turning to experienced professionals who provide guarantees. You can clarify all the details and ask questions by calling the phone number - 8-916-777-32-54.
Cylinders are used to fill markers with compressed gas. Most often they are made of aluminum, although Kevlar containers are considered lighter and more reliable. When filling cylinders, its volume should be taken into account and safety rules should be observed.
How can you fill a paintball tank?
For pumping cylinders, 2 main options for compressed gas are used:
- Air. It fills cylinders simply and safely. In addition, air is always available and cannot cause any harm to the marker.
- Carbon dioxide. Less available gas. The process of refilling the marker is much more difficult for them. In addition, with constant use, carbon dioxide cools the paintball gun. IN more rubber gaskets suffer, which become more fragile when the temperature drops. The main advantage of carbon dioxide is a much greater yield of shots than from air.
Recently, a company tried to introduce propane as a fuel for markers. The result turned out to be quite surprising - more than 50,000 shots can be fired from one cylinder without refueling. However, propane is not widely used, as it can only be used in special markers that have a low rate of fire.
Where to fill up a paintball tank?
For refueling game markers, cylinders-receivers, which are also called shipping tanks, are usually used. They can be purchased from different characteristics volume and maximum pressure. It is not worth buying immediately cylinders designed for a maximum of 350 atmospheres, since problems with blowing in can occur, especially in small towns.
Refueling of a transport cylinder is carried out by means of the compressor. Therefore, the main task is to find a place where there is the same compressor. Of course you can buy it. However, such an acquisition may only be feasible if a paintball club is opened in a city with a population of at least 500,000 inhabitants. Otherwise, the compressor will pay off for a very long time.
So, the main places for refueling cylinders:
- Organizations involved in the sale of nitrogen, argon, carbon dioxide, etc. Compressed air and nitrogen are completely identical in their characteristics, so you can refuel between any of your choice. Refueling paintball cylinders here is very simple - you come with cylinders, fill them up and go with papers to pay.
- Local departments of the Ministry of Emergency Situations. They always have a compressor available, they will only agree to provide a service if they have documents confirming the quality of the cylinder.
- Factories, industrial enterprises, airfields, that is, any organization that uses high-pressure equipment. Separately, it will be necessary to stipulate a fee for air injection, and it is not at all a fact that the enterprise wants to do this. But in any case, it's worth a try.
It should be noted that it is impractical to have only one filling place, since compressors often break down, and having one gas supplier can lead to long downtime.
Paintball stations
Filling stations are used to pump compressed gas from receiver cylinders into play areas. Their main disadvantage is that they often break down, and even those models that are made from expensive materials by the most reliable manufacturers. Therefore, you should always have a set of spare rubber bands ready. It is impossible to use parts from plumbing for repairs - only those that are designed to work with high pressure are suitable. To prevent breakdowns, the station must be periodically lubricated with VD-40 liquid.
