How to make furniture from matchboxes. DIY toy furniture: a master class for beginners. Furniture for dolls: photo ideas

House is built. It doesn't matter at all whether it is big or small, made of brick or cardboard, Barbie or Snow White with the dwarfs will live in it. In any case, he needs an interior, furniture and necessary accessories. You can buy everything in toy stores today. But as you know, the most fashionable things are considered exclusive, made in a single copy, handmade things. Therefore, we roll up our sleeves and begin work on making doll furniture with our own hands.

Making a real barbie chair

In the toy market, the most appreciated are the functioning miniature models of real human objects: cars, airplanes, clothes, etc. The smaller the model, the more difficult it is to make them. Let's try to create a similar exclusive piece of furniture.

To make upholstered doll furniture, you need to prepare:

• thick cardboard 1-1.5 mm thick;
• plain paper;
• foam board (0.5 cm thick) or corrugated cardboard (0.3 cm thick);
• tube with a diameter of 1.5-2.5 cm from any material. You can use an old marker or cardboard thread tube;
• fleece or thin foam rubber 0.3-0.8 cm thick;
• fabric for upholstery. It is better to choose it in chintz or staple, so that it is better impregnated with glue;
• pVA glue and "moment";
• scissors, knife;
• ruler, pencil.

Making a real chair in stages

• Draw drawings of the parts on paper and cut them out.

• Cut out the details of the chair according to the drawings. Four rectangles of foam board or six of corrugated cardboard glue together. This will be the base of the chair, the seat. Then glue the back and front of the chair, cut out of thick cardboard. Secure the armrest tubes. Further, after pasting them with paper, they will hold well, but for now they can be slightly "swept" with pieces of scotch tape.

• Cut out several strips of corrugated cardboard 1 cm wide and equal to the length of the tubes, and place them in a stack under the roller, covering the layers with glue. Determine the number of layers locally. Cover the armrest first with tissue paper and then with fleece or foam.

• Cover the chair with a cloth. To do this, cut out pieces of material according to the same drawings, but adding a little (1-1.5 cm) to the length and width for the fold.

• Cover the back (removable) for the chair first with foam rubber on one side, and then with a cloth on all sides.

• Install the backrest in the chair. It can be glued to a stationary back, or you can leave it collapsible.

• Do the pillow for the chair in the same way as for the back.

• This is how the royal chair for your favorite doll turned out.

The technique of making this upholstered furniture is similar to the scheme described above, only this chair is not a model of the present, and therefore the base for it is simpler in execution. It consists of a piece of foam rubber, cut according to patterns, 1-2 cm thick and a small box. These parts also need to be pasted over with a beautiful fabric, and then connected.

Cut out a pillow from a rectangular piece of foam rubber that matches the size of the box and drape it with a cloth. If there is a box that is long and narrow enough, it can make a chic sofa for the doll.

The desire to make furniture for very often stops the lack of materials. Of course, few people have furniture boards, wooden blocks and springs in their apartment. However, miniature furniture does not require such real details. Half-liter plastic bottles are in any home and they can be used not only as containers ..

If you cut them in a certain way, they can turn out beyond the original chairs. In order to give them a presentable look, you can sheathe or glue the edges of the plastic with beautiful braid. Next, you need to sew your two pads and fill them with some kind of filler. One of them will be the seat and the other will be the backrest.

To complete this work, we need a cardboard tube that remains from a roll of toilet paper. The manufacturing scheme is the same as in the previous version, only in this case we will not be able to make the armrests. Therefore, miniature furniture will be more like an ottoman with a back.

Cut the desired shape from the tube and cover it with a cloth. Make a bag, fill it with filler, and place it inside the tube to make a seat.

Doll baby crib

Barbie or Monster High are adult girls, so it makes sense that they might have a little baby. He also needs some kind of furniture. For example, a baby cot.

There is a very simple option for making a cradle for a little Baby - a crib from matchboxes. You can use popsicle sticks for the backs. Glue the two boxes together and cover them with colored paper. Glue sticks and paint them. The bed is ready.

Matchboxes are great construction material for doll furniture. These are ready-made drawers. You can make a whole kitchen set of them.

1. Take 9 boxes and fold them in three rows, gluing together.
2. Tape around the perimeter with colored paper tape.
3. Staple the staples at the ends of the boxes. These will be handles.
4. Make hanging cabinets out of three boxes.
5. Glue two parts in each box.
6. Paint or paste over them with colored paper.
7. Cut the top of the box in the middle. These will be the doors. Pens on them can be drawn with a felt-tip pen or glued over a grain of rice.

A wonderful chest of drawers can be constructed from matchboxes. For this we need:

• 4 matchboxes;
• 4 beads for legs and 4 beads for handles;
• thin fabric or colored paper;
• beautiful braid;
• glue, paints.

Paint all the boxes inside and out with a solid color. Glue them together and wrap with cloth or paper. Glue the braid along the contour, 4 bead legs to the bottom, and handle beads to each drawer.

There is no house where several boxes of matches are not kept. It turns out that matchboxes can be great creative material. Together with the child, you can come up with a lot of ideas where to "attach" unnecessary boxes. We will show you a few ideas for girls together with a master class on making furniture from matchboxes.

Simple Matchbox Ideas

Little toys from kinder surprises or cute babies also need a cozy house. Furniture for a house is easy to build if you fold a few matchboxes and glue them with colored paper. From matchboxes, you can easily and easily fold a chair, table, sofa or wardrobe. Try it and you will definitely succeed!

Doll furniture from matchboxes

Perhaps the most essential piece of furniture in a dollhouse is the bed. We suggest you make a bed with drawers on which a small doll can comfortably sit. So, we need two matchboxes, glue, paint, 2 beads.

1. We take two matchboxes and glue them together, this will be the base of the bed. We put the boxes on a flat surface, outline them with a pencil, leave space for the ends and draw the backs of any desired shape.
2. We cut out along the contours what we circled in duplicate and glue the boxes on both sides.
3. We paint the bed in any color and attach the handles to the drawers using wire.
4. The finished bed can be decorated with a mattress, blanket and pillow.

Mini chest of drawers made of matchboxes

With girls school age it will be interesting to make a chest of drawers for storing jewelry and hairpins. To make a chest of drawers, we need 3 matchboxes, glue, toothpicks, wire, pieces of a rod or beads for handles.

Giving or making a home for her dolls for your daughter is just the beginning. Further, this house will have to be furnished. This is a bunch of toy furniture, equipment, accessories. How to make furniture for dolls with your own hands will be described in this article.

How to determine the size

Dolls, their houses and furnishings are small copies of us and our homes. And the most reliable way to make doll furniture with your own hands and not to make a mistake is to measure real objects, reduce them several times, and then work with the obtained values.

Furniture for dolls - copies of our furniture

How much to reduce the real size depends on how small or large the doll is, because they are from 7 cm to 60 cm or even higher. Accordingly, they need furniture. different sizes... To determine the number by which the real size should be divided, the average height of a person in centimeters (170 cm) is divided by the height of the doll. We get some number. Here it will be necessary to divide the dimensions of real furniture into it.

For example, the height of the doll is 15 cm. Calculate: 170 cm / 15 cm \u003d 11.3. We divide all parameters of "human" furniture by this number. It should also be said that 14-15 cm is the most popular size among the puppet population. Therefore, most of the finished furniture is made in a 1:12 ratio. It is possible for us to use the available dimensions at least in order to be able to navigate with the scale of the required parts and the amount of materials.

So, the most common sizes of dolls:

• male doll 150 mm;
• female doll - 140 mm;
• baby doll - 75-100 mm;
• toy baby - 65-75 mm.

If you need furniture for dolls of this size, its parameters will be as follows:

If the toys you have are slightly larger / smaller, you can not adjust the size. If there is a big difference, you will have to increase or decrease (or you can calculate it yourself).

Doll furniture from matchboxes

The easiest way to make furniture for dolls with your own hands is from ordinary matchboxes. They are glued together using PVA glue, creating certain structures, then pasted over with paper or cloth, self-adhesive film, etc. Wooden beads can be used as legs, drawer handles can be made from small buttons on legs or from long beads.

You can make chairs, a table, a chest of drawers, a bed, a bedside table from matchboxes. Another thing is that furniture is obtained for very small dolls, no more than 10 cm in height.Although, you can use a larger number of boxes by gluing them into blocks, and from these blocks create furniture for dolls about 15 cm high. Also an option, but work with others materials are not much more complicated, but they are more plastic and allow you to create products of more elegant shapes.

This may be your first experience in making doll furniture. Later you can tackle something more serious.

Furniture for a dollhouse made of cardboard

You can try your hand at making furniture for dolls using cardboard. The material is inexpensive, affordable, you can try and make mistakes, redo. Cardboard is usually connected with PVA glue, you can use a glue gun or any universal glue that can glue cardboard, fabric, wood. By simply making furniture for dolls with your own hands from cardboard, you will also use these materials. If we talk about convenience, then a glue gun is preferable - it glues quickly, it is convenient to work, the connection is reliable.

To make furniture for dolls, you can use regular packing cardboard. It is cheap, but it makes furniture very delicate. It is unlikely that the child will last long. But, as a "first experience", this a good option... More reliable products are obtained from cardboard for scrapbooking. It is more dense, homogeneous, has a different thickness (from 2 mm and more), it can be with a textured surface, embossed with monochromatic patterns, a pattern on one or two sides. The disadvantage of such cardboard is that you have to buy it, and some types of such cardboard are not very cheap.

Cardboard doll bed

This cardboard doll bed is designed for a large doll - up to 50 cm in height. If necessary, all indicated dimensions can be reduced.

This option can be done in literally 10-20 minutes. There is no need for glue or other fasteners. The details are held by the grooves cut in the cardboard. The width of the groove is equal to the thickness of the cardboard, the length of the slots and the dimensions of the blanks are indicated in the diagram.

Green and yellow dots indicate matching cuts. They are inserted one into the other, where the assembly ends. If you like this model, you can also make it out of plywood.

Schemes for the manufacture of cardboard doll furniture

Basically, furniture for dolls made of cardboard is glued. It is hardly possible to make something delicate or very complex out of this material, but making simple models will not take long. Having a diagram with dimensions, you can even do without explanations. Everything is clear anyway.

Such models can be done "by eye". Without "upholstery" they look unsightly, but after that it is quite decent. A bedside table with doors and an open shelf - the same scheme, different design

Furniture patterns for dolls can be used not only for making from cardboard. They can be transferred to plywood and cut with a jigsaw.

Closet for dolls from scrap materials

The toy cabinet can be made of plywood, painted or covered with wrapping paper or self-adhesive tape. Here, probably, no questions will arise - everything is clear, and if there are questions, you can spy on their solution in a "natural" closet. But you can make it out of absolutely inexpensive materials... DIY furniture for dolls is good because its cost is very low.

Out of a cardboard box

The main task is to find a box made of thick cardboard suitable size... Moreover, it will be easier to work if it is packaging - with folding edges. Such a folding part is a ready-made door. It only remains to finish it - hang a mirror, attach a handle, etc.

One of the options homemade furniture for dolls - wardrobe

What you need to work

For work, you will need good scotch tape, preferably on a paper basis, since it is easier to glue the finish to it later. If you have a glue gun or a construction stapler (a large clerical one will do) with staples, that's not bad either. If, in addition to cardboard and paper, you will also use other materials, it is better to find a universal glue that glues paper, cardboard, fabric, plastic. You will also need scissors and a stationery knife, a ruler.

If the box you find is too large, you can shrink it by cutting off the excess. To make the folds even, we take a ruler. we apply it to the place of the future fold, several times we pass well along the ruler with a blunt hard object (the petiole of a spoon or fork). After that, the cardboard will bend easily.

Filling for toy cabinet

Cut out shelves from scraps or from another box. They should be slightly - 5-8 mm - longer and wider than the inside of the cabinet. We bend the excess so that the sides form on all sides. Wrinkles form in the corners, we carefully cut them off. We bend one of the parts 180 ° and glue it to the shelf itself. This side of the shelf will “look into the world”. We bend the other three parts at an angle of 90 °, coat with glue and glue the shelves into the cabinet. The photo on the right shows how the shelves are glued. But, so that the places of gluing are not striking, it is better to wrap the sides down.

Making furniture for dolls with your own hands is no less pleasure than playing with it later.

In addition to shelves, you can also make a crossbar for hangers. It can be made from bamboo skewers, for example, you can try using a juice tube, wire, etc. Hangers can also be twisted from colored wire or cut from juice bags, from plastic bottles etc.

Finishing is a creative process

Next, it's up to finishing. You can paint the cardboard with watercolors or acrylic (better) paints, glue it with wrapping paper, cloth, felt. You can imitate a mirror surface - glue it with foil (food, for example). If you want to make a "plastic" surface, look for water bottles desired color, cut off the neck and bottom, and use the "body" as a finishing material.

Finishing is a creative process, but, for starters, use simpler, softer, thinner materials easier to work with

Handles can be made of wire, beads, long beads. For toy cabinets bigger size you can find buttons or buttons. We glue all this “beauty” after we have “sheathed” the cabinet.

Newspaper doll wardrobe

You will need old newspapers, PVA glue with a brush, a glue gun, a couple of pieces of wire or thread, wrapping paper for finishing the cabinet or paint.

We twist dense tubes from newspapers, coat them along the edge of PVA and leave to dry. Then the tubes can be glued together. For this operation better fit glue gun. There are two ways: first, collect large blocks, then cut them into pieces of the required length, or immediately cut the tubes of the required length and glue the blanks immediately to size. The second way is more painstaking, but there is less waste.

The finished cabinet walls must be fastened together. It is better to use thin wire to rigidly fix the 90 ° angle. First, coat the joints with glue, then pull the walls together with wire. If the wires get in the way, they can be removed after the glue dries.

The bottom, top, shelves are glued using the same technology. The doors will need to be done a little differently. To make them open, two strips about 1.5 cm wide are cut out of the tape. Scotch tape is glued along the edge of the door so that a little more than half hangs in the air. With this loose tape we glue the door to the wall, but so that there is a gap of 2-3 mm between the wall and the door (there is just an adhesive tape). This will make it possible to close the doors. We fix the glued door on the other side with the second strip of adhesive tape.

The second way to fix the doors is with wire. Only this time it should be tough and thick enough. Cut off a piece that is 2 cm longer than the height of the cabinet. Immediately on the wire on one side we make a loop using 1 cm. We bend the loop at an angle of 90 ° to the wire. We make holes in the bottom and roof, pass the wire through the bottom, the loop remains at the bottom. We put the door on the wire using the extreme tube instead of the hinges. Bending the wire slightly, thread it through the hole in the roof of the cabinet, bend the excess, fixing the door. We repeat the same operation with another door. Please note that it is necessary to fasten the door to the tape before finishing the cabinet, and on the wire - you can also after.

There are still some little things that need to be said a few words. Cabinet legs and handles can also be made from paper tubes... You just need to twist them out of the paper with which you trim the toy. Roll it up into a tight roll, glue the edge with glue, then cut it into pieces of the desired length and glue it in the right places. Instead of tubes, there can be wooden sticks, beads, etc.

Doll's bookcase or ruler shelf

You can make furniture for dolls with your own hands from school wooden rulers. They are good because they are already processed, have the same width and thickness. At the office supply store, you can find the size you want - larger / smaller, wider / narrower - as desired. For example, to make a doll's bookcase, you need 6 rulers 15 cm long.

You will also need a jigsaw for work. If there is an electric one - great, if not - manual will do, since there is not too much work. You also need fine-grain sandpaper, glue (PVA or woodwork) and paints (acrylic or gouache).

From the rulers we cut the segments: 4 pieces of 6 cm each, one - 8 cm. Sand the edges until smooth, also remove the markings and bar codes. We place shelves between the two rulers (which are 6 cm each), on top we leave approximately the same distance - under the lid (a segment of 8 cm). We coat the joints with PVA glue or carpentry, join and tighten with masking tape, leave for a day. When the glue dries, we glue the very last piece - the cover on top. Actually, the shelf itself is ready, it remains to paint it.

To obtain an even and bright color, it is better to cover the structure with white, after drying, paint it in the desired shade. Also, do-it-yourself doll furniture can be decorated in.

Furniture for dolls: photo ideas

You can make furniture for dolls with your own hands from the most unexpected materials. You have already seen how to use newspapers and wooden rulers. But you can make tables, chairs, armchairs, sofas, beds, shelves, wardrobes, etc. from ice cream sticks.

Garden bench or sofa - depending on the finish

What is good about this material, you probably already understood - it has rounded machined edges, the same size and well-processed. If the sticks feel too rough, use fine-grain sandpaper to smooth them down.

Clothespins make good chairs and chairs. They are disassembled into halves and connected with wood glue. Curly products are obtained in almost a few tens of minutes.

Armchair, table - can also be made from clothespins

Wooden clothespins are almost always used to make doll furniture. But no one forbids taking plastic. To work with them in the same way, the only difficulty is that wooden ones are easier to modify by changing the thickness of the shape, etc. If the product is simple and does not require modification, you can take plastic ones. They are more varied in shape and size, are already painted, so there is less fuss with them.

With the growth of skill, you can switch to a more complex material - plywood or wood. The difficulty is that gouging and cutting out miniature parts requires filigree precision, perseverance and takes a lot of time. But you can do whatever you want.

Angular desk for a doll .... everything is like real

Plywood wardrobe for dolls - very high fidelity

Probably in every home you can find matchboxes. But few people know, they are an excellent material for creativity, and you can easily make furniture from matchboxes with your own hands without any problems. Such creativity will be especially interesting for a child, because every kid loves to play with dolls, and they also need furnishings. Like the real ones, only in miniature. In this article, we will tell you how easy and simple it is to make original pieces of furniture from such an affordable and cheap material.

Making a bed

If the baby has a little baby, then he needs to be put to bed somewhere. And any mom needs to know how to make a bed from matchboxes. For manufacturing, you will need to acquire:

• Two matchboxes;
• Glue;
• Paper;
• Paint;
• Wire;
• Two beads.

1. We glue together two packs of matches. They will serve as the bed base.
2. We attach the base to the paper sheet and outline it with a pencil on all sides. In this case, you should leave room for the ends and finish the backs.
3. We cut out paper templates in duplicate and glue them to the base.
4. We paint in the required color.
5. We string the beads on a wire and attach them to the drawers.

Important! To decorate, you can use a mattress, blanket and a small pillow.

Making a chest of drawers

When doll furniture is made from matchboxes with your own hands, you can not do without a chest of drawers. Moreover, it is suitable not only for the game - it can be used to store hairpins and jewelry.

Cooking required:

• Matchboxes (3 pcs.);
• Glue;
• Toothpick;
• Wire;
• Cardboard;
• Beads.

1. We glue the frame for the chest of drawers from cardboard. It will require the manufacture of side walls, bottom, countertops, partitions between the boxes.
2. We insert boxes into the frame.
3. We glue toothpicks to the front of the "boxes", cut off the excess.
4. We attach the beads to the boxes using a wire.

Making a chair

How to make furniture for dolls from matchboxes? We have already examined the bed and chest of drawers, and now we will learn how to make a beautiful armchair.

This will require cooking:

• Colored decorative paper;
• Colored double-sided paper;
• Four empty matchboxes;
• Double-sided tape;
• Stationery glue;
• Rulers;
• Scissors;
• A simple pencil.

Follow the instructions:

1. On a colored double-sided sheet, we measure out four rectangles, the dimensions of which are 11 by 8 cm.
2. Cut out the rectangles.
3. We glue each package with paper.
4. We glue the blanks with glue or double-sided tape. One of them is laid horizontally, the other - vertically.
5. We use decorative sheets to decorate the seat.
6. We also cut out the decor to decorate the other two boxes. The dimensions of the rectangles are 4 by 3 cm.
7. We glue the sheets in the middle of the boxes.
8. We glue the remaining packages vertically to the previously glued base.

The chair is ready! For a complete set, it remains to make a few more of the same.

Making a passenger car

In order to captivate a child, it is not enough to know how to make furniture from matchboxes. For example, not all boys will be interested in this process. With the help of such material, you can make many different useful little things... Let's consider how to make a car, which the kid will then play with pleasure.

Preparation required:

• Six matchboxes;
• Four bottle caps;
• Two sticks from Chupa-Chups sweets;
• Plasticine bar;
• A simple pencil;
• Rulers;
• Colored paper;
• PVA glue;
• Glue brushes;
• Shila;
• Scissors.

We follow the instructions:

1. Using paper, glue two boxes in length (along the long side).
2. We are preparing a second template of the same.
3. We glue the blanks together. They should be located one above the other.
4. On colored sheets, we outline the resulting structure.
5. The base is pasted over with sheets of the desired color on all sides.
6. We glue two boxes one above the other.
7. We glue them on all sides with colored paper.
8. From colored sheets (white, yellow or blue) we cut out a rectangle measuring 1.5 by 12 cm.
9. Fold the paper in four.
10. On the upper side of the base, we round the corners, cut the workpiece at the folds.
11. Cut out the headlights from paper.
12. Put plasticine inside the bottle caps.
13. Glue a small blank on a long base in the middle.
14. Colored paper “windows” are glued to the cab. Glue the front and back one at a time, cut the remaining two pieces of paper in half and glue the side with the rounded side down.
15. We glue the headlights.
16. With the help of an awl we make holes for the wheels.
17. Insert candy sticks into the resulting holes.
18. We put on plugs with plasticine on the sticks.

The game machine is ready!

Of course, now you can easily buy doll furniture in any toy store, but it will be much better if you make it with your child. A waste material such as matchboxes is suitable as the main material. Having pasted over with beautiful paper and decorated with decorative elements, you will receive an original table, wardrobe, sofa or dressing table in a short time, and even practically free.

Necessary materials:
- red thick paper;
- silver paper or candy wrapper;
- stationery glue;
- 6 matchboxes;
- Double-sided tape;
- brush;
- a simple pencil;
- white gouache;
- white half-beads;
- scissors;
- ruler.

Stages of making a dressing table:
1. We take the matchboxes and use double-sided tape to fasten the boxes 3 together.

2. Now we cut out two strips with parameters 17 x 5.2 cm from red double-sided paper.

3. Attach pieces of double-sided tape to the boxes and glue the cut strips of red paper around them.

4. To connect two bedside tables together and form a lady's table - you need to take red double-sided paper and cut out of it
rectangle 11.5 x 5.2 cm.

5. Attach double-sided tape to the upper sides of the bedside tables.
6. Glue the rectangle on the bedside tables.

7. Now let's make the vertical side of the dressing table where the mirror will be placed. To do this, cut out a segment from red paper, where it will be 6 cm vertically and 9 cm horizontally.
8. With a simple pencil draw a semi-oval.
9. Cut with scissors along the marked lines.
10. We glue it to one side of the table with office glue.

11. Attach a mirror to the wall. To do this, take a candy wrapper or shiny paper and, drawing a circle with a pencil, cut it out with scissors.

12. Glue the mirror in the middle of the vertical wall of the dressing table.
13. Let's start decorating the drawers. Take white gouache and paint a brush on the front sides of the boxes.
14. Cut out six strips for drawers from red double-sided paper, the sides of which will have parameters 3 x 0.7 cm.
15. Glue small stripes with office glue.

16. In the middle of each strip, glue tiny white half-beads. These will be handles to the drawers.