Guide for sliding door system slider. Secrets of installation of sliding doors for rooms from professionals. Types of sliding doors depending on heat savings

This Privacy Policy is integral part of the User Agreement of the website of ChipGlass LLC (OGRN 1147746968786 dated August 26, 2014 TIN 7719888067), which is located on the Internet at the address (hereinafter referred to as the Site) and applies to all information, including the User's personal data, received by the Site Administration in the process the User's work with the Site, the execution of the User Agreement and agreements between the Site Administration and the User. Using the Site means the User's unconditional consent to this Privacy Policy and the conditions for processing his personal data specified therein; in case of disagreement with these conditions, the User must refrain from using the Site.

Before using the Site, the User should carefully study this Privacy Policy.

Personal Information

1. Providing in any form (filling out applications on the site, making orders, sending letters) their personal data (name, e-mail, phone number, address) to the Site Administration, the User agrees to the processing of personal data by the Site Administration.
2. The processing of personal data is carried out in order to fulfill the User Agreement and other agreements between the Site Administration and the User. The site administration uses the data provided by the User in order to: receive customer applications; receiving feedback about the activities of the Site; evaluation and analysis of the Site.
3. The processing of personal data is carried out exclusively on the territory of the Russian Federation.
4. The User's consent to the processing of his personal data is given to the Site Administration for the period of fulfillment of obligations between the User and the Site Administration under the User Agreement or other agreements between the User and the Site Administration.
5. In case of withdrawal of consent to the processing of the User's personal data, the User notifies the Site Administration in writing or by e-mail. After receiving this notification, the Site Administration stops processing the User's personal data and deletes it.
6. The site does not have the status of a personal data operator. The User's personal data is not transferred to any third parties, unless the User has agreed to such actions or the transfer is necessary for the performance of the contract with the User.

Measures to protect personal data

1. The site administration takes all reasonable measures to protect the personal data of Users, respects the rights of personal data subjects and is guided by the current legislation of the Russian Federation.
2. The protection of the User's personal data is carried out using physical, technical and administrative measures aimed at preventing the risk of loss, misuse, unauthorized access, violation of confidentiality and data modification. Security measures include firewall and data encryption, control of physical access to data centers, and control of data access permissions.

Changing the privacy policy

1. The site administration reserves the right to unilaterally make any changes to the Privacy Policy without prior notice to the User. The new Privacy Policy comes into force from the moment it is posted on the Site, unless otherwise provided by the new edition of the Privacy Policy.

To isolate a room inside an apartment or house, builders use a door. It is especially important to install interior structures in bedrooms, nurseries, sanitary rooms, kitchens and offices.

The interior door can be sliding or hinged, and each type has its own advantages and disadvantages. The swing model consists of a box to which the canvas is attached with the help of loops. To open or close the door, you need to move the loose part of the sash away from you or towards you.

One of the disadvantages of this design is that it requires additional space to open.

The sliding door is devoid of this disadvantage. It is equipped with a sash that moves along the skids, freeing or closing the passage. For fastening and moving the panel, a roller is used, which is fixed on the door.

Retractable interior system

Sliding structure standard

The kit includes the following items:

• Cloth or sash for opening and closing the opening;
• Upper skid for hanging the sash and guiding it along the opening when moving;
• The bottom rail, complete with a guide, is designed for the roller to move along it when the sash moves;
• Video clip. The number of parts depends on the weight of the sash. If the canvas is not heavier than 70 kg, then two are enough, if more, four are used;

• The stoppers are designed to prevent the roller from flying out of the skids when opening. The kit includes two stoppers that are inserted into the upper skid.
• The flag roller is designed to prevent vertical shaking of the panel if only the top rail is used;
• Accessories. It applies door knob, decorative panel for closing the top skid, lock.

Attention! Fittings for a sliding structure differ from accessories for a swing door.

However, depending on the type, the sliding structure can be equipped with several skids and doors.

Advantages and disadvantages of a sliding design

Advantages:

• no additional space required for opening;
• the cloth easily opens, moving on rollers;
• it is possible to automate control;
• installation can be done by hand;
• beauty and aesthetic design.

• the door has poor heat and sound insulation;
• the cost of a sliding structure is higher than a swing one;
• it is impossible to install furniture close to the wall in the movement zone of the sash.

Types of sliding structure

• harmonic;
• book;
• slider.

Folds "accordion" and "books" consist of lamellas, the first of which is attached to the opening. When the sliding structure is opened, the lamellas move along the skids and are assembled in the form of an accordion. The rail is designed to hold and guide the slat carriages.

The door "book" differs from the "accordion" in that it consists of two slats, while in the accordion there are 3-7 of them.

The slider door belongs to the sliding type of products and is available in the following types:

• coupe;
• cassette;
• radius;
• cascading.

The cassette system consists of a cassette that is mounted into the wall. The canvas hides in it when opened. If the door is double-leaf, then the installation of cassettes is carried out in both walls.

The radius door is equipped with curved skids around the circumference. The canvas moves along it when the structure is opened or closed. Such a door requires more free space to operate compared to other types.

A cascading or telescopic door has more than two wings that move on several skids. It is usually used as a sliding partition.

compartment door

Depending on the model, this design has one sash or two. The canvas moves along the wall along the guide rails. The sash is made of tempered glass, wood, plastic, chipboard and other materials, or a combination of them.

The frame is made of durable aluminum profile or MDF covered with veneer. Due to the light weight and moisture resistance of the aluminum sliding structure, the compartment door is used in any premises, including those with high humidity. In addition to frame structures, the door can also be produced in a frameless version.

Mounting of skids is carried out only at the top or at the top and bottom. For smooth movement, the design is equipped with a roller. To guide the carriage during movement, skids or a profile are used.

The roller, or rather its wheels, is made of high-strength rubberized plastic, Teflon, steel, aluminum or rubber. The roller is equipped with a sealed bearing for smooth and easy rotation of the wheels.

Attention! The performance of the structure depends on the quality of this element, since the roller bears the main load when the sash moves.

If you plan to install the profile at the top and bottom, then the roller is also mounted on the top and bottom of the panel. The top piece looks different from the bottom. When the lower roller is used, it bears all the mechanical load, while the upper one plays the role of a supporting element. To increase the softness and smoothness of the ride, the lower roller is equipped with a shock-absorbing spring.

Installation of a sliding single-leaf wooden structure

Let's consider how to install slider-type interior doors using the example of a common single-leaf coupe model.

To quickly and efficiently complete the installation, you need to prepare a minimum set of tools before starting work. It includes:

• electric drill and drill "pen";
• screwdriver;
• hacksaw for wood (if the canvas is wooden);
• hammer;
• hardware (self-tapping screws, anchors);
• water level;
• construction roulette;
• puncher (if a bottom rail is installed that guides the movement of the carriage).

Stage 1. Preparatory

Prepare interior opening. Large cracks and potholes are plastered. Align the vertical and horizontal sides of the opening with plaster mixes. Be sure to check the verticality and horizontality using the building level, so that the installation of the sliding structure is carried out correctly.

Stage 2. Box mounting

If the door involves the use of a box, then it is installed. The box for the sliding structure is convenient to assemble in a horizontal position. The length of the vertical bars should correspond to the height of the opening. If it is larger, then the excess is cut off with a jigsaw or hacksaw.

The finished system is inserted into the opening and aligned horizontally and vertically.

Stage 3. Mounting the top skid

The rail or skid, which is mounted at this stage, holds the sash and guides the roller as it moves. If the sliding door is installed in the opening drywall partition, then the rail is mounted on a wooden beam.

A wooden bar with a section of 5 × 5 cm is applied to the drawn line and screwed with self-tapping screws. Installation is carried out so that the lower side of the bar is located along the outlined line. The length is taken equal to the width of the sash, multiplied by 2. One half of the timber is installed above the opening, and then it continues towards the opening of the sash.

The beam must be fixed strictly horizontally, otherwise the door will not work correctly. For example, the sash can spontaneously open or close.

The beam can be omitted if the canvas of the sliding structure is installed at the entire height of the room. In this case, the rail is attached directly to the ceiling. The beam is fixed with anchors.

The runner is attached to the beam from the underside. A small gap is left between it and the wall so that the door opens freely.

Attention! If the canvas of the sliding structure is heavy, in this case it is recommended to use a rail at the top and bottom.

For the lower skid, which should guide the carriage, a groove is selected in the floor using a perforator.

Stage 4. Mounting the carriage and hanging the sliding structure panel

If the door is wooden, then holes are drilled along the edges of the upper end of the panel in order to install brackets in this place later, to which the roller will be fixed. The bracket must be placed strictly in the middle with an indent from the end edge of at least 2 mm. When assembling, the brackets are directed with semicircular cutouts to the wall.

To make holes, use a pen drill. You can install the brackets using self-tapping screws.

The sliding structure carriage is pre-assembled, a roller is inserted into it and the adjusting bolt is screwed into it, but not completely.

Check how the roller (both right and left) smoothly moves along the skid. When checking the roller should not be additionally lubricated. Further, along the edges of the runners, travel stops are installed. Fittings are installed on the door (the handle and the lock are inserted into the canvas).

Now the sash of the sliding structure is slightly raised above the floor. The bolt of the left and right carriages is alternately inserted into the bracket screwed onto the door.

A roller is inserted into the rail, after inserting it into the hole in the plates. The height of the sash is adjusted using the adjusting screw. After the canvas is located at the desired height, the bolt is tightened, and the roller is fixed in the desired position.

If the door moves only along the upper skid, then so that the canvas does not move when moving horizontally, a flag roller is attached to the floor.

So that the door can be put on this roller (flag, knife), a groove is made in the lower end of the sash, a little deep more sizes checkbox. The door is mounted on top of the flag roller. In this case, he will guide the door along the line of its movement.

Installation of a glass sliding structure

If the door is glass, then the sash fastening is somewhat different.

To install the roller on the door, use carriages of a special type. They have metal clips, made in the form of cheeks, between which the glass is attached.

Stage 5 Installation of decorative elements for a sliding structure

The last stage of work is the installation of platbands, extensions on the box and decorative panel, which covers the top rail.

How to properly install an interior sliding door such as a slider is shown in the video.

The choice of sliding design

When choosing, pay attention to what length and width the door should have. Standard sizes flaps: 200-210 cm high and 60-90 cm wide. If you have a non-standard doorway, then the height is calculated by the formula: the height of the opening plus 8-10 cm, and 4-5 cm are added to the width.

In contact with

Comments

Unfortunately, there are no comments or reviews yet, but you can leave your own ...

New Articles

New comments

S.A.

Grade

Svetlana

Grade

Sergey

Grade

Sergey

Grade

Alexei

This Privacy Policy is an integral part of the User Agreement for the website of ChipGlass LLC (OGRN 1147746968786 dated August 26, 2014. TIN 7719888067), which is located on the Internet at the address (hereinafter referred to as the Site) and applies to all information, including the User's personal data received by the Site Administration in the course of the User's work with the Site, the execution of the User Agreement and agreements between the Site Administration and the User. Using the Site means the User's unconditional consent to this Privacy Policy and the conditions for processing his personal data specified therein; in case of disagreement with these conditions, the User must refrain from using the Site.

Before using the Site, the User should carefully study this Privacy Policy.

Personal Information

1. Providing in any form (filling out applications on the site, making orders, sending letters) their personal data (name, e-mail, phone number, address) to the Site Administration, the User agrees to the processing of personal data by the Site Administration.
2. The processing of personal data is carried out in order to fulfill the User Agreement and other agreements between the Site Administration and the User. The site administration uses the data provided by the User in order to: receive customer applications; receiving feedback on the activities of the Site; evaluation and analysis of the Site.
3. The processing of personal data is carried out exclusively on the territory of the Russian Federation.
4. The User's consent to the processing of his personal data is given to the Site Administration for the period of fulfillment of obligations between the User and the Site Administration under the User Agreement or other agreements between the User and the Site Administration.
5. In case of withdrawal of consent to the processing of the User's personal data, the User notifies the Site Administration in writing or by e-mail. After receiving this notification, the Site Administration stops processing the User's personal data and deletes it.
6. The site does not have the status of a personal data operator. The User's personal data is not transferred to any third parties, unless the User has agreed to such actions or the transfer is necessary for the performance of the contract with the User.

Measures to protect personal data

1. The site administration takes all reasonable measures to protect the personal data of Users, respects the rights of personal data subjects and is guided by the current legislation of the Russian Federation.
2. The protection of the User's personal data is carried out using physical, technical and administrative measures aimed at preventing the risk of loss, misuse, unauthorized access, violation of confidentiality and data modification. Security measures include firewall and data encryption, control of physical access to data centers, and control of data access permissions.

Changing the privacy policy

1. The site administration reserves the right to unilaterally make any changes to the Privacy Policy without prior notice to the User. The new Privacy Policy comes into force from the moment it is posted on the Site, unless otherwise provided by the new edition of the Privacy Policy.

Rehau Euro-Design Slide sliding doors are designed for interior or unheated spaces.

Sliding system and brush seals - do not require maximum thermal insulation. Rehau Slide doors are suitable for office and home partitions, warm balconies, country verandas, covered gazebos.

The maximum height of the door leaves is 2300 mm (with a width of 700 mm), the maximum width is 1500 mm (with a height of 1900 mm). Weight - up to 100 kg.

Reinforced reinforcement is installed in the inner chamber of the sash profile to absorb operational loads. Rehau Slide doors use enlarged support rollers with a load of up to 50 kg each.

The door leaf can be equipped with a double-sided handle for opening from the inside and outside.

Rehau Slide door features

Sliding sashes are easy to use, do not require space to open

Reinforced PVC profile provides rigidity and good heat and sound insulation

The use of a double-glazed window increases the insulating characteristics of the structure

Rehau Slide door design

We offer Rehau Slide doors in various color options. Decorative lamination provides the look natural wood(and other materials), does not need restoration and additionally protects the profile. Structures can be laminated on one or both sides.

Rehau Euro-Design Slide door in dark grey. Lamination RENOLIT EXOFOL MX, color - Anthracite Grey. »

Laminating decorative film pasted from the side of the room, from the street - the doors are white.

Rehau Slide door prices

Profile: Rehau Euro Slide White color Double-glazed window: 4x12x4 Dimensions: 1500x2100 mm FROM 37 200 RUB

Profile: Rehau Euro Slide Colour: Sapeli (9.20165021) Double-glazed window: 4x12x4 Fittings: Siegenia CS Portal Dimensions: 1500x2100 mm FROM 43 500 RUB

Specifications REHAU Slide

Profile	RAU-PVC with slanted drainage seam
Frame Profile Depth	60 mm (2 rails), 108 mm (3 rails)
Sash profile depth	41 mm
Number of cameras in a profile	2 (sash), 3 (box)
Fill thickness	4 - 20 mm
Maximum door leaf height	2300 mm (white profile) - with a width of not more than 700 mm
Maximum door leaf width	1500 mm - with a height of not more than 1900 mm
Sash weight, Max	100 kg
Seals for filling	EPDM rubber (black and grey), RAU-SIK (white)
Rebate seals	brush with felt central divider
Support rails	aluminum tires
accessories	Siegenia-AUBI CS Portal (Germany)

Sliding doors or sliding doors are a new word in door design. They can be glass and open a view from the living room to the garden or deaf and just save space between the corridor and the rest of the rooms.

Sliding door types

Interior sliding doors. Sliding interior doors usually save space in small spaces. They can have the standard dimensions of an ordinary interior door, but a sliding mechanism. Production technologies - PVC, chipboard, MDF, fiberboard. These doors are a little more expensive than usual, which pays off with their special functionality.

Interior doors loft style. Such doors usually have a floor-to-ceiling (or almost) format, a glass format in a metal frame with deglazing. They are huge, not standard at all. Such doors are usually very expensive and are design elements.

Sliding doors to the terrace (warm). Such doors will help create a stunning atmosphere in the living room, kitchen or dining room. Such a block may have two, three, four or even more blocks lined up. Usually some blocks do not move, others move to one side. For example, a variant with four blocks with a total width of 3.8 meters has two central blocks that move apart in different directions, forming an opening of 1.9 meters. The variant with two blocks with a total width of 1.9 meters has one sliding part towards the second block, opening the opening by 0.8 meters. Usually such doors are made in plastic, wood or aluminum.

Sliding doors for the veranda (cold). These are the same doors as on the terrace, only they are cold, with poor thermal insulation properties. Their cost is about two times lower than warm ones. Such doors can also be used for the space between the living room and the insulated loggia in a city apartment.

sliding door cost

Price sliding interior door size (width) of 80 cm - about 4000-12000 rubles, depending on the design.

The price of a cold glazing unit in the format of sliding doors can be very different, depending on the size. For example, for a block with a height of 2.2 m and a width of 1.6 meters - about 20 thousand rubles, with a width of 2.4 meters - 30 thousand rubles, with a width of 3.2 meters - 40 thousand rubles, with a width of 4 meters - 50 thousand rubles. Or about 6-10 thousand rubles per sq. m. meter.

Price warm glazing unit in the format of sliding doors is much higher. With the same height of 2.2 meters and a width of 1.7 meters - 80 thousand rubles, 2.6 meters - 120 thousand rubles, 3.5 meters - 160 thousand rubles. Or about 15-25 thousand rubles per sq. m. meter.

Pros and cons of sliding doors

Space saving. Sliding doors will help save the space needed for other purposes or a sense of spaciousness. This is important not only in apartments, but also in country houses.

They create a panorama with a frame, “like in a movie”. Creating a perspective overlooking the garden or terrace is a very important plus sliding doors and panoramic windows in general.

Easy and cheap to assemble. Their installation is usually already included in the price and takes a very small amount of the total, so it's best to order it right away.

By themselves, they are more expensive than usual. Of course, this is a minus. But on the plus side, this is what we have - these doors replace windows, allow you to realize modern ideas in the interior, add a sense of modern comfort to the home. Therefore, we believe that they are still worth buying them.

Not suitable for areas with hurricanes. For Russia, this is not very relevant, but still it is worth knowing that hurricanes (not just strong winds or blizzards) can break the glass.

Sliding doors in different rooms

Living room. It is best to choose slider doors with a height of 2.4 meters or even higher. Width - 1.9 m; 2.9 m; 3.8 m (there is another size system - 1.7, 2.6 and 3.5 m, each company has its own) - the most popular. The best options are usually the most expensive, which is why the majority of the glazing budget is spent in the living room. Take it for granted.

Kitchen and dining room. In the kitchen and dining room, it is better to stick to the height of the sliding doors, as in the living room. But the ideal width is 1.9 meters, which is less than in the living room. By the way, the minimum width of sliding doors is about 0.8-1 meters.

Bedroom and children's. The minimum height of sliding doors to a balcony, French balcony or terrace here is about 2 meters. The height recommended by experts is 2.1-2.4 meters. In general, it is best to use sliding doors with access to the balcony; for the nursery, you can also make a French balcony, but only with solid glass railings. The ideal glazing width for such rooms is 1.9 meters.

Price. Always look for cheaper options if you are not happy with the price. Some firms sell sliding doors for a very high price because it's fashionable. Others have in their assortment only branded goods, which are also very expensive, they simply do not have a line of doors in the economy segment.

Security and sliding doors. Many people think that the glass slider is easy to break or that it is not safe enough. Actually it is not. You simply set an alarm in the house and any opening is immediately displayed on your tablet or phone with sound, the alarm turns on and an automatic request to the police goes.

Design project. It is best to order a design project from professional designer, but you can also contact the manufacturer or sale of sliding doors and tell them about your interior. The consultant will help you choose the size and color.

Dimensions. For the living room, the optimal height will be from 2.4 meters, in the bedroom you can put blocks of 2.1-2.2 meters, in the nursery - also 2.1-2.2 meters. The standard block width is about 190 cm, the popular one is 290 cm, the most the best option for the living room there will be an option with four blocks of sliding doors, about 380 cm wide.

Alternatives. In addition to sliding doors, you may be interested in doors, natural and. In any case, we hope that you will find the right option for you and get the door of your dreams.