How to paint a refrigerator at home. How to paint an old refrigerator: we restore the appearance of the device. Is it possible to paint the refrigerator compartment

To transform the good old "white friend" designer Tatyana Nazarova suggested that it be gilded a little.

Glossy blue paint evenly spread it over the surface of the refrigerator. The refrigerator should turn completely blue.

Second paint, which was used for decoration, is completely different in texture - thicker, with a marble effect. It was sprayed with a thin stream and chaotic movements so that the drawing did not turn out to be too geometric. The golden pattern should not interrupt the blue background, so you need to stop coloring in time. Ideally, the pattern should resemble light, shiny scales.

Leaves and branches

User of our site Marina came up with a different image for the white refrigerator, reminiscent of golden autumn.

First, the surface was sanded, then painted with brown acrylate paint for walls and ceilings with a regular paint roller. Then it was time for creativity: they went over the refrigerator with gold paint from a spray can, painted brown branches on a gold background, and gold ones on a brown one, respectively.

Finishing touch - leaves: nylon blanks for decorating gifts were also covered with gold paint, glued to the painted branches and slightly tinted with brown.

flower thickets

User Elena Belyanskaya made her battered-looking pet ignite with new colors and covered with flowers.

Fridge outside thoroughly washed and degreased. Then a red spray paint was applied. The paint was applied in two layers to achieve a dark red surface color.

After that, using an acrylic golden composition started decorating. In the process, drops of paint were applied to individual sections of the flowers along the line of the petals and rhinestones were attached with glue. Tiny pieces of glass decorated the middle of each small flower.

At the bottom of the refrigerator to fill the space, painted golden grass with wild flowers appeared.

A high-quality refrigerator without repair works for more than a decade. It is a pity to throw away a serviceable refrigerator, but it is very dissonant with the modern kitchen setting. Restoration will save, but first you need to choose paints, get acquainted with the technology of work, ensure safety for children and animals.

The industry offers compositions based on various film-forming substances. Not all of them are suitable for covering the outside of the refrigerator. Our task is to find suitable enamels - the most durable films.

The composition needs high adhesion - the paint must tightly grasp the base, otherwise the top layer will peel off with the first scratch. The film needs to be flexible, because the case is subject to thermal expansion. The painted surface is wiped with detergents, the composition must be resistant to aggressive liquids.

Choosing waterproof paint internal works for metal. These coatings include:

• two-component primer-enamel on galvanized metal;
• alkyd enamel;
• heat-resistant silicone enamel;
• nitrocellulose composition for metal and wood - automotive nitro enamel;
• acrylic matte enamel for metal surfaces;
• polyurethane or epoxy paint.

May be sprayed or applied by roller. What paint to paint the refrigerator, choose an exception.

We do not need paint on galvanized metal, there is no need to overpay for heat resistance - the refrigerator is located away from hot surfaces.

What paint to paint the refrigerator at home

The task of the master is to get a flat surface, akin to the factory one. The layer should be opaque, lie down evenly, not flow down. Use the material in an aerosol can or use a roller or brush - it does not matter. The main thing is that the applied composition should dry out, not have smudges. Then the next layer is applied.

The choice of the color of the refrigerator outside depends on the overall design of the room. You can create an accent spot or create a surface in harmony with the facade. The main thing is to use a suitable coating and do the job carefully. Automotive paint is the most durable of all. Acrylic is water-based, odorless, the film is resistant to destruction. Epoxy composition is most durable under the influence of dampness. What paint to paint the refrigerator outside, you decide.

Application for painting refrigerator slate paint

Having studied the paint and varnish market, we found several compositions that masters advise using for work at home. Do you want to make the walls of the refrigerator a corner of creativity? Then for painting should use slate paint. The presence of composite particles in the composition will give the coating a slight roughness. The composition is created on a latex basis, the film is durable. On a dark, matte surface, you can draw with chalk. Drawings are washed off with soap and water. As an independent, dark shade coating, it looks stylish.

The Finnish manufacturer Tikkurila is considered the best manufacturer of such compounds. Under this brand, you can buy Liitu black paint. Sibiria is a domestic brand of slate, magnetic and marker compositions. Some of them have antiseptic properties. Need a black refrigerator - buy a jar of Sibiria PRO or MagPaint from Holland.

Is it possible to paint the refrigerator with paint for batteries

What is the difference between batteries and a refrigerator? Only because they experience seasonal heating. That is, the film must be elastic, withstand thermal expansion, adhere tightly to the metal, be neutral to detergents and resistant to abrasion. The same requirements for the composition for refrigerators. Is it possible to paint a refrigerator and a battery with the same paint, creating a kitchen design? Which one to choose?

You need to find a product that does not change color under the influence of temperature, with good hiding power and a decorative effect. It is better if the paint is odorless. We suggest choosing:

• alkyd enamel based on organic solvents has a white base element, the coloring pigment is added additionally, the smell is strong before drying;
• aquatic acrylic enamel odorless, use only titanium dioxide paint, for refrigerator inside and outside;
• organosilicon alkyd enamel, which contains special pigments that hide defects in uneven painting.

It is very important that all these compositions do not lose color over time, they can be decorated with a pearlescent additive.

Is it possible to paint the refrigerator compartment

If the refrigerator chamber was enameled, rust inevitably appeared at the joints of the panels and in the cracks, no cleaning will save you from yellow streaks. Inner surface almost no ventilation, the air in the chamber is humid, it is difficult to choose a coloring composition. The smell of paint from the refrigerator is removed for a long time. Special absorbers are used activated carbon and selikogel.

Only water-based acrylate can be used. But before that, you need to remove rust, apply a special converter, degrease and prime the surface. It is almost impossible to remove the smell and harm from other paints from the refrigerator.

Refrigerator paint

It often happens that a well-functioning refrigerator has healed, the situation has been changed, and it still works fine, but has an unsightly lining. How to paint a refrigerator using the latest coatings at home? We use the experience, advice and video of the masters.

We will start with the fact that the refrigerator has already been emptied of the contents and everything that is not painted has been unscrewed or covered with adhesive tape. The refrigerator body must be installed on a multi-layer newspaper flooring around the perimeter and under the bottom.

Before painting the refrigerator, the surface should be washed, cleaned of rust and degreased. Rusty places can be treated with a reducing agent. If there are chips, peeling, cracks, the places are cleaned with a smooth transition to enamel and treated with a primer. Each layer is dried, according to the instructions, processed with fine sandpaper, the surface of the refrigerator is brought to a perfectly even state before painting.

Determine the purpose of painting:

• renew the surface, leaving the same color;
• paint in a different color, in harmony with the wallpaper or radiator;
• create a design cover.

How can you paint a refrigerator at home? One obstacle - can not be used powder paint- it needs to be baked in a special cabinet, there is no such possibility.

Automotive enamel is used to create a smooth, uniform surface. It's easy to paint a refrigerator with an aerosol can. In addition to the high price, the paint is toxic, intensive ventilation is required. Fine spray impregnates the dust, settles on the floor. It is important to choose the right place where to paint the surface of the refrigerator. But the coating will turn out to be resistant, not fading.

Epoxy paints can be used, but they are more difficult to apply and require skill. The coating will turn out to be resistant to detergents, glossy.

Water-based acrylic paints have a bright range, form a resistant film, and are non-toxic. You can use a roller or brush to apply paint. You can smear in one place no more than 2 times, otherwise the film will be on the brush. After the layer dries, apply a second one.

How to paint a refrigerator at home, watch the video.

Do-it-yourself refrigerator painting

The refrigerator has already been prepared for painting at home, cleaned of old defects, primed and sanded. Paints than to paint old refrigerator outside, picked up. It will not be superfluous to stock up on old rags for wiping droplets and hands. The place of work is prepared.

Before you start painting the refrigerator at home, you need to protect yourself, flowers, animals and loved ones from inhaling harmful odors. Protective clothing, respirators and several pairs of gloves will save your skin and Airways. Is it possible to take the device to the balcony? Required if aerosol is used. Dust settles on all surfaces, it is difficult to wash it.

Using paints under a brush or roller, apply a thin layer. First, check how the composition lies somewhere in an inconspicuous place. The paint must be opaque and not run down a vertical surface. Each next layer is applied after the previous one has dried.

How to paint the outside of the refrigerator

Manufacturers offer several types of metal paints that can be used to paint the refrigerator. But are they all right for you? You may not be able to tolerate fast drying solvents. Then you can't use car paints and epoxy compounds. Rubber paints - this is what the people call acrylic compositions for a durable thin film, they are odorless. Based on an aqueous solvent, they are initially produced only white color- there will be something to paint on the old enamel inside the refrigerator. For getting desired color powder is dissolved in the primary composition, stirred until a uniform color.

You already know how to paint the prepared surface with your own hands if you primed the surface yourself. In the same way, paint is applied. Sanded after drying and re-applied until a uniform glossy surface is obtained.

There is a lot of training material at your service, look at the photo on how to paint a refrigerator at home. The white stripes are adhesive masking tape.

Is it possible to paint the refrigerator in a different color

Most often, refrigerators are pasted over with a film to change the color. But the old "pot-bellied" refrigerators with rounded shapes cannot be exactly pasted over. Can you paint it yourself in a different color? As in the case of restoring the previous color, you first need to strip and primer. Changing the color of the refrigerator is easy. It is necessary to apply the paint in a very thin layer with a roller, so that the old surface first shines through. Each time, the layer must dry. And so at least 5 times. At the end, gloss should be applied. In this case, the use of a spray will give a good result.

Is it possible to paint the refrigerator with slate paint

The new range of inks is referred to as slate and magnetic types. The magnetic base contains iron in its composition, has the properties of attracting. Magnets stick to the surface.

Slate paint creates a surface on which you can write with chalk. Durable latex-based film slightly rough from used fillers. Therefore, the chalk drawing lies flat. You can wash it off with plain soap and water. For a refrigerator, a pattern can become part of the decor. But most importantly, the color of the coating depends on the filler. Matte paint lays down beautifully, looks decent.

The old refrigerator will be transformed, will find a second life, if you paint it with slate paint. It is not difficult to do this, the spray or canned composition is applied to the primed surface, like ordinary paints. You can find gray, golden, copper shades, but more often they sell black and dark green. The surface would be nice to decorate with decor, there are many options.

Video

We offer you to watch a video on how to properly paint and restore an old refrigerator.

The result when painting the refrigerator is much better than if you try to paste over the refrigerator with a film. In order for the film to lie flat on the surface of the refrigerator, you will have to work hard to prevent the formation of air bubbles or wrinkles. Staining allows for a more even surface.

The process of painting the refrigerator has some peculiarities, but with careful attention they are easily resolved. If desired, with the help of painting it is possible not only to give beautiful view old coating, but also lead new refrigerator in accordance with the interior of the kitchen.

How to paint a refrigerator

Enamel for painting cars in spray cans is far from being an option for painting a refrigerator, although it may seem so.

The refrigerator is most often painted in or, in rare cases, taken out to the balcony. If you use spray paint, its smallest particles will settle on furniture, walls and floors. In addition, even dust is impregnated with paint - after it settles on the floor, it can only be removed with a solvent. Cleaning with white spirit is not particularly pleasant, and if taking the refrigerator out into the open is not possible, it is better to use a roller for painting.

Of course, when painting with a roller, it will not be possible to achieve a smooth and uniform coating, as with aerosol spraying, but there will be much less cleaning. We must also remember that even a respirator will not save even a respirator from getting into the respiratory organs, so aerosols are only suitable for open space.

Still, if desired, you can use automotive enamel. But epoxy paint, some of the acrylic coloring compounds will do.

Coloring technology

To paint the refrigerator, you need to stock up in advance with paint and a roller, clean rags, film, newspapers, cook detergent, sponge, adhesive tape.

The surface of the refrigerator should be properly washed and dried. In order not to stain anything around, cover the interior items with a film, cover the floor with newspapers. Provide room ventilation.

It is best to first test the paint on an area of ​​the surface that is not conspicuous - this will help make sure that the color and tone are chosen correctly. It is advisable to remove the accessories from the refrigerator or seal it with masking tape.

When painting with an aerosol, the can must be kept at a distance of 30 cm from the surface. It is necessary to apply paint in uniform movements, directing them from left to right.

The painted refrigerator is dried for about half an hour, then you can apply paint with another layer. If a roller is chosen for applying paint, it is better to choose a not very wide one.

When deciding how to paint a refrigerator, they first determine the tasks. Coloring agents are chosen depending on the goals that are pursued in the decor. Much depends on whether the painting of the refrigerator will be an update of a small area or a complex of works is expected to completely restore the top layer.

To paint worn corners and bottom panels, it is enough to use spray paints. If a large-scale reconstruction is required, then choose compositions with the following properties:

• high adhesion - adhesion between the outer and inner layers;
• thixotropy - no smudges;
• environmental friendliness - regardless of what paint it is decided to paint the refrigerator, it should not contain toxic substances;
• degree of gloss - the higher the index, the more resins in the structure and the higher the coefficient of wear resistance and gloss;
• elasticity - the metal used in refrigerators has a high coefficient of thermal expansion;
• long service life.

Characteristics of paintwork

Before you paint the refrigerator with your own hands, it is worth considering the quality of paint and varnish products. To return the correct appearance unit, you can use one of three types of LKS. These include:

1. Nitroenamel. Durable, long-lasting blend gives a smooth, glossy finish. In addition, if you use automotive enamel in an aerosol package, one more plus will be added to the pluses - ease of application. But nitro enamels of this class contain highly toxic substances. They are flammable, unstable to mechanical stress.
2. Acrylic paint for metal. Meets the requirements for coloring agents that can be used to update the refrigerator. The presence of anti-corrosion components and a high adhesion index increase the operational characteristics and service life of the painted product.
3. Epoxy. Paints of this class are wear-resistant, environmentally friendly. Answering the question: is it possible to paint the refrigerator with epoxy paint, you need to keep in mind that their composition consists of two components. The material is capricious: the surface must be perfectly smooth before application. In addition, such paint belongs to an expensive price category.

List of materials and tools:

• degreasing composition;
• means: detergent and rust;
• abrasive sponge;
• sandpaper;
• masking tape;
• brushes, rollers, spray gun;
• baths for paint;
• respirator, gloves;
• film for floor and wall protection;
• dry rag;
• putty;
• primer;
• dye.

Surface preparation

Before you repaint the refrigerator, you need to prepare its surface.

Stages of work:

1. Degreasing. Before painting the old refrigerator in a different color, its surface is degreased. This is a mandatory process, without which it is impossible to obtain good adhesion and an even coating layer. Depending on the degree of contamination, a solvent or detergent is used for this treatment.
2. Grinding. This stage is needed only if there is rust, scratches or chips. The tool for abrasive processing is selected depending on the nature of the damage. Small flaws are removed with fine-grained sandpaper. Complicated defects are cleaned with a drill with a grinding nozzle.
3. Puttying - leveling the surface, dents or chips.

Decoration methods

You can restore the appearance with paint for painting the refrigerator. Options for resolving the issue: how to update the refrigerator:

1. Spray painting is the easy way. But when using a primer, paint or varnish in an aerosol can, you should follow the safety rules. Due to the high content of toxic substances in their composition, it is recommended to carry out painting work in rooms with good ventilation.
2. Painting with a roller, brush. In this method of decorating, the order in which dyes are applied is important. Each subsequent layer is applied perpendicular to the previous one with a break necessary for the surface to dry completely. Wherein hard-to-reach places processed first.
3. Using a stencil. There is a large selection of ready-made templates with and without adhesive. With their help, you can change the appearance and color of individual areas on the refrigerator. If the pattern of stencils does not correspond to the plan, you can do it yourself. To do this, the pattern is applied to cardboard, plastic or thick paper and cut through it with a knife with a thin blade. Then the template is fixed with masking tape to the place of decoration, the slots are filled with the necessary color. The area painted in this way is left to dry completely.
4. In the case of a reverse stencil, it is attached with glue applied from the wrong side of the template. The space not intended for staining is covered with film or paper.
5. Decoupage - application to the surface of the application. It is fixed with PVA glue on a repainted layer and varnished. This method hides small scratches or dents.
6. Usage decorative film in several options: from updating small areas of an already painted device to covering the entire surface. Relatively recently, coatings in 3D format that have appeared on the market are, as practice has shown, in high demand, as they replace refrigerator paint. One minus - the surface should be smooth, without cracks, scratches and chips. Otherwise, bubbles and irregularities on the coating cannot be avoided.
7. Stickers, stickers. They are used as decorative elements and to mask minor defects.