Features of hobs Electrolux. How to use induction cookers Remedy

Operating instructions Glass ceramic hob EHS60210P 2 electrolux Electrolux. Thinking of you. Share your thoughts with us at www.electrolux.com Contents Safety information Installation Product description Operating the appliance 2 3 5 6 Tips and tricks Care and cleaning If the appliance does not work ... Environmental protection 9 10 11 12 We reserve the right to make changes. Safety For your own safety and proper use of the machine, please read this manual carefully before installing and using it. Always keep these instructions with the machine, even if you transfer or sell it. Users should be familiar with how the machine works and the safety rules for its operation. General safety instructions WARNING! Persons (including children) with physical, sensory or mental impairments or lack of experience or knowledge should not use this appliance. They must be supervised or instructed by a person responsible for their safety. Child safety This appliance may only be used by adults. Children should be supervised to ensure that they do not play with the appliance. Keep all packing materials out of the reach of children. There is a danger of suffocation. Keep children away from the appliance when it is on. ATTENTION! Turn on the childproof lock to prevent small children and pets from accidentally turning on the appliance. Operational Safety Before using the device, remove all packaging, stickers and foil. Switch off the cooking zones after each use of the appliance. Danger of burns! Do not place cutlery or saucepan lids on the hob as they can become hot. ATTENTION! Risk of fire! Superheated fats and vegetable oils flammable very quickly. Correct use Never leave the operating device unattended. Only use the appliance for home cooking! Do not use the appliance as a work table or stand for any objects. Do not place or store flammable liquids, materials, or fusible objects (such as plastic or aluminum) on or near the appliance. electrolux 3 Be careful when connecting the appliance to nearby power outlets. Do not allow power lines to come into contact with the appliance or hot cookware. Avoid tangling electrical wires. How to prevent damage to the appliance The glass ceramic hob can be damaged if objects or dishes fall onto it. Glass ceramics can be scratched by moving cast iron or aluminum cast pans, or pans with a damaged base. Do not allow all the liquid in the cookware to boil off to avoid damage to the cookware and glass ceramics. Do not turn on the burners without cookware on them or with empty cookware. Never cover any part of the appliance with aluminum foil. ATTENTION! If the surface is cracked, cut off the power supply to avoid electric shock. Installation Before installing, please copy the following information from the rating plate: Model name (Modell) ................ Product number (Prod. Nr.) ...... ....... .... Serial number (Ser. Nr.) ............... The rating plate is affixed to the bottom of the instrument. 949 594 178 00 EHS60210P 58 HAD 56 AO 220-240 V 50-60 Hz 7.1 kW ELECTROLUX Safety instructions WARNING! Be sure to read this! Make sure that the device has not been damaged during transport. Do not connect a damaged appliance. If necessary, contact the supplier. This appliance may only be installed, connected or repaired by an authorized technician. Use only original spare parts. Only use built-in appliances after they have been built into suitable furniture and work surfaces that comply with standards. It is forbidden to make changes to specifications or the design of this product. This could result in damage to the appliance or injury. Strictly observe the laws, regulations, directives and standards (safety requirements, disposal rules and procedures, electrical safety regulations, etc.) in force in the country in which the device is installed! Maintain the minimum permissible distances to adjacent appliances and furniture! Provide protection against electric shock, for example, install drawers only with a protective bottom directly under the appliance. The cut surfaces in the worktop must be protected from moisture with a suitable sealant. Connect the appliance tightly and without gaps to the work surface with a suitable sealant! Protect the underside of the appliance against steam and moisture, e.g. from a dishwasher or oven! 4 electrolux Do not install the appliance near doors or under windows! Otherwise, the dishes may tip over from the hob when doors or windows are opened. ATTENTION! Danger of electric shock. Follow the instructions for electrical connections carefully. The power supply socket is live. De-energize it. Correct installation devices connected to the network must be reliably protected from contact with live parts. Loose and incorrectly seated plug connections can cause overheating of the connector. A qualified electrician must connect the wires to the terminals. The power supply cable should not be taut. In the case of single-phase or two-phase connection, use an appropriate power supply cable type H05BB-F rated for a maximum temperature of 90 ° C (or higher). A damaged power cable must be replaced with a special cable (type H05BB-F, rated for a maximum temperature of 90 ° C or higher). Contact an Authorized Service Center. The device must be equipped with an electrical device that allows the device to be disconnected from the mains with a gap between all contacts of at least 3 mm. Suitable disconnecting devices must be used: circuit breakers, fuses (screw fuses must be removed from the socket), residual current circuit breakers and starters. Installation min. 50 mm R 5mm min. 500 mm min. 50 mm \u003d 600mm 490 + 1mm 560 + 1mm \u003d min. 25 mm min. 20 mm electrolux 5 min. 30 mm Product description Functional elements of the hob 1 145 2 mm 170 mm 265 mm 5/210 175 120 / mm 145 mm 3 1 2 3 4 5 Single hotplate 1200 W Oval hotplate 1500/2400 W Single hotplate 1200 W Control panel Three-circuit hotplate 800 / 1600/2300 W 5 6 7 4 Functional elements of the control panel 1 2 3 4 14 13 12 11 8 10 The device is operated using the touch keys. touch button 1 function switch the hob on and off 9 6 electrolux touch button 2 with the button 3 locks with indicator function switch on / off the key lock or child lock switch on / off the STOP + GO function with indicator switch on the automatic heating function 4 5 cooking zone indicators in timer mode show cooking zones for which a timer has been set 6 timer display time indication in minutes 7 heating power level display preset heating power level indication 8 oval heating zone on / off button 9 automatic indicator switch-off 10 11 with indicator residual heat indicator control bar display of the hot state of the heating zone setting the heating power level selection of the heating zone 12 13 14 indication of the activated automatic switch-off function increasing or decreasing the time / key with indicator to turn the external circuits of heating zones on and off Indicators on the display more Visual and audible indication of function operation Display Description The heating zone has not yet cooled down (residual heat) Two circuits of the three-circuit heating zone are switched on All the circuits of the three-circuit heating zone are switched on The outer circuit of the oval heating zone is switched on + number Fault Automatic shutdown mode is activated Residual heat indicator ATTENTION! Risk of burns from residual heat! Using the appliance Turn on and off for 1 second to Touch to turn the appliance on or off. Automatic shutdown Hob switches off automatically if: all cooking zones are switched off. the heating level has not been set after switching on the hob; the sensor has been covered with an object (dishes, rags, etc.) for more than 10 seconds. A signal sounds for a short time and the hob switches off. Remove the object or wipe the control panel; electrolux 7 the panel switches off. See the table. You have not switched off the hotplate or you are not in trouble. changed the heating stage. After a short time, the cooktop will also light up. Time after which the automatic switch-off takes place. Heating stage - - Switch off after 6 hours 5 hours Setting the heating power level 4 hours 1.5 hours Power level switch. The indicator for the automatic quick heat-up function comes on and goes out after a while. The operating time of the automatic quick heat-up function depends on the selected heating power level. 11 10 9 Touch the mark for the desired power level on the control bar. The power level indicators light up. / Switching the external heating circuit on and off The effective heating surface can be matched to the pan size. To activate the outer loop, touch / touch the softkey. The indicator lights up. To activate additional outer circuits, touch the same sensor key again. The next indicator comes on. To turn off the external circuit, repeat the same steps. The indicator goes off. Automatic heating The automatic fast heating function sets the heating power level for a short time and then reduces it to the required level. This allows the required heating power level to be reached in a shorter time. Touch A. The indicator will start flashing. Set the heating power level (1-8). The indicator 8 7 6 5 4 3 2 1 0 1 2 3 4 5 6 7 8 9 will light up. Using the timer Countdown timer The countdown timer is used to set the operating time of the hotplate for one cooking cycle. The countdown timer must be set after selecting a hotplate. The heating level can be selected before or after setting the timer. Selecting a hotplate: touch several times until the indicator of the required hotplate comes on. 8 electrolux To start the countdown timer: touch the timer to set the time (00 - 99 minutes). When the flashing of the cooking zone indicator slows down, the time counts down. Viewing the remaining time: select a hotplate with. The cooking zone indicator flashes faster. The display shows the remaining time. To adjust the countdown timer: select the hotplate with, touch or. Switch off the timer: select the hotplate with. Touch. The remaining time counts back to 00. The cooking zone indicator goes out. You can also touch and at the same time to switch off. When the set time has elapsed, a signal sounds and 00 flashes. The hotplate switches off. To turn off the buzzer: touch the CountUp Timer The CountUp Timer is used to track how long the cooking zone has been in use. Selecting a hotplate (if more than one hotplate is in operation): touch several times until the indicator of the required hotplate comes on. To activate the CountUp Timer function: touch the timer and it will turn on. When the cooking zone indicator flashes more slowly, the time counts down directly and the display switches between the elapsed time (in minutes) Viewing the elapsed time: select the hotplate with. The cooking zone indicator flashes faster. The display shows the elapsed time. To switch off the CountUp Timer: select the hotplate with and touch or to switch off the timer. The cooking zone indicator goes out. Timer The timer can be used to count down the time when the cooking zones are not in use. Touch. Touch or to select the time. When the set time has elapsed, a signal sounds and 00 flashes. Switching on the STOP + GO function will switch all active cooking zones to keep warm. Tap to enable this function. The symbol lights up. Tap to turn off this function. The previously selected heat setting is switched on. does not stop the timer. The function completely locks the control panel, except for the touch key. Locking / unlocking the control panel You can lock the control panel with the exception of the key. This prevents accidental changes in heating power. Lights up Touch the symbol. display. The timer continues to run. to touch the symbol to enable this function. The display goes out. Switching off the appliance also deactivates this function. Child lock This function prevents accidental use of the hob. Switching on the childproof lock Switch on the hob with. Do not set any heating power level. Touch within 4 seconds. The indicator lights up. Switch off the hob with. Deactivating the child lock Switch on the hob with. Do not set any heating power level. Touch for 4 seconds. The indicator goes out. electrolux 9 Switch off the hob with. Canceling the childproof lock for one cooking cycle Switch on the hob with. The indicator lights up. Touch for 4 seconds. Select the heating power value for 10 seconds. The hob can be used. After switching off the hob with the child lock will reactivate. OffSound Control Turn off the beep Switch off the instrument. Touch for 3 seconds. The indicators light up and go out. Touch for 3 seconds. Lights up, the device is in standby mode. , lights up, touch beep will turn off. The acoustic signal is switched off, unless you touch it, when the reminder timer or countdown timer has elapsed, or when you close the control panel. Switch on the acoustic signal Switch off the device. for 3 seconds. Touch indicators The indicators will light up and go out. Touch for 3 seconds. Lights up because the buzzer is muted. Touch, lights up, the appliance is in standby mode. Buzzer is on. Tips and tricks Cookware The bottom of the cookware should be as thick and flat as possible. Cookware made of enamelled steel, as well as cookware with an aluminum or copper base, can discolor the glass ceramic surface. Saving energy If possible, always cover the pans with a lid. Place cookware on the hotplate before turning it on. Switch the cooking zones off before the end of the cooking time in order to use the residual heat. Heating level 1 The dimensions of the base of the cookware and the hotplate must match. Öko Timer (Economy timer) To save energy, the cooking zone heater automatically switches off a little before the countdown timer beeps. The shortening of the heating time depends on the heating level and the cooking time. Examples of using the hob The data in the following tables are guide values. Purpose: Time To keep cooked food warm as required Recommendations Cover electrolux 10 Heating level Purpose: Time Recommendations 1-2 Hollandaise sauce, melting butter, chocolate, gelatin 5-25 min From stir for a while 1-2 Thickening: beaten omelette, eggs "in a bag" 10-40 mins Cook covered 2-3 Cooking rice and milk dishes over low heat, reheating ready-made meals 25-50 mins Add water, at least twice more than rice. Stir milk dishes from time to time 3-4 Steam vegetables, fish, meat 20-45 mins Add a few tablespoons of liquid 4-5 Steam potatoes 20-60 mins Use max. 1/4 l water for 750 g potatoes 4-5 Cooking large quantities of food, stews and soups 60-150 mins Up to 3 l liquid plus ingredients 6-7 Light frying: escalopes, cordon blue veal, chops, meatballs , sausages, liver, flour gravy, scrambled eggs, pancakes, donuts, as required Turn halfway through cooking 7 - 8 Deep searing, potato pancakes, beef fillet steaks, steaks 5-15 minutes Turn halfway through the cooking time 9 Boil plenty of water, boil pasta, fry meat (goulash, pot roast), deep-fry potatoes Information on the use of acrylamide IMPORTANT! According to the latest scientific research, frying foods (particularly starchy foods) can pose a health hazard due to the formation of acrylamide. Therefore, we recommend that you fry food at the lowest possible temperature and do not fry it until it has an intense brown crust. Care and cleaning Clean the device after every use. Always use cookware with a clean bottom. ATTENTION! Sharp objects and abrasive cleaning agents can damage the device. For your safety, cleaning the appliance from dirt with a steam jet or pneumatic cleaner is prohibited. Scratches or dark spots on glass ceramics do not affect the operation of the appliance. Removing dirt: 1. - Remove immediately: melted plastic, plastic wrap and food containing sugar. Use a special glass ceramic scraper. Place the scraper at an acute angle to the glass-ceramic surface and move it along the surface. electrolux 11 - Switch off the appliance and let it cool down before each cleaning: limescale deposits, water stains, splashes of grease, shiny discolored spots. Use a special cleaning agent for glass ceramic or stainless steel surfaces. 2. Clean the device with a damp cloth and a little detergent. 3. Finally, dry the appliance dry with a clean cloth. If the device does not work ... Fault Possible cause of the fault and how to eliminate it The device does not turn on or does not work. Switch the appliance back on and set the heating power level within 10 seconds. Key lock or Child Lock is activated. Deactivate the key lock or the Child Lock function. See section "Child lock" or "Stop + Go function". You touched 2 or more sensor keys at the same time. Only touch one sensor at a time. Water or grease splashes on the control panel. Wipe control panel A beep sounds when the appliance is switched off. One or more touch keys are covered with a foreign object. Remove foreign matter from the touch keys. Wipe down the control panel. The residual heat indicator does not light up. The heating zone did not have time to heat up, because has been switched on for a short time. If this causes the heating zone to become hot, contact your local Authorized Service Center. The external heating circuit does not turn on. First turn on the internal heating circuit. An audible signal sounds, the device turns on and off again. After 5 seconds, another beep sounds. You covered the touch key with an object from the touch key. The symbol lights up. Automatic shutdown is activated. Switch the appliance off and on again. ... Remove extraneous and digital device malfunction. Disconnect the appliance from the power supply for a few minutes. Remove the fuse from the electrical distribution board of your apartment. Switch on the appliance again. If the symbol comes on again, contact your local authorized service center. No beep sound when touching the control panel keys. The audible alarm is turned off. Turn on the audible signal. The pa symbol lights up. If using the above methods did not resolve the problem, contact your dealer or service center. Provide the information on the rating plate, the three-digit glass ceramic code (located in the corner of the hob) and the error message that appears. 12 electrolux If you have misused the appliance, there will be a charge for service provided by the service center or dealer, even if the warranty has not yet expired. For maintenance instructions and warranty conditions, refer to the warranty booklet. Environmental protection The symbol on the product or its packaging indicates that it must not be disposed of as household waste. Instead, it should be handed over to the appropriate collection point for electronic and electrical equipment for recycling. By ensuring this product is disposed of correctly, you will help prevent potential harm to the environment and human health, which could otherwise be caused by inappropriate waste handling. For more information on the disposal of this product, please contact your local authorities, your waste disposal service, or the store from which you purchased the product. Packaging materials The packaging is made from environmentally friendly materials and can be recycled. The plastic parts are marked with the material they are made of:\u003e PE< (по‐ лиэтилен), >PS< (полистирол) и т.п. Упаковочные материалы следует выбрасывать как бытовые отходы в соответствующие контейнеры мест‐ ных служб по утилизации отходов. electrolux 13 14 electrolux electrolux 15 www.electrolux.com www.electrolux.ru 892935496-A-102009

Glass ceramic surface

EHS 6651 P

User's manual

Please be sure to follow these rules, otherwise the user will lose the right to warranty service in the event of a malfunction in the device.

This appliance complies with the following EU directives:
- 73/23 / EEC of 19.02.1973 "Regulations for low voltage" -89 / 336 / EEC of 03.05.1989 "Regulations for electromagnetic compatibility", Including amendments to Regulation 92/31 / EEC
- 93/68 / EEC of 22.07.1993 "Regulations for CE identification marks"

Correct operation
This appliance may only be used for cooking and frying. food products at home.
It cannot be used as a desktop or storage space for any items.
Any rearrangements and changes in the device design are unacceptable.
Flammable liquids, flammable materials, or low-melting objects such as film, foil, plastic, aluminum, etc. must not be placed on or stored on or near the device.

Safety measures for children
Make sure that small children never approach the appliance.
Older children should only use the appliance under the guidance and supervision of an adult.
To avoid accidental switching on of the appliance by small children or pets, we recommend activating the childproof lock.

General security measures
Installation and connection of a new device may only be carried out by trained and qualified specialists.
Built-in appliances can be operated only after they have been installed in built-in cabinets and worktops that meet the necessary technical standards and are suitable for such use.
In case of any malfunctions in the operation of the device or damage to glass ceramics (breaks, breaks or cracks), the device must be turned off and disconnected from the mains to avoid possible electric shock.
Only trained and qualified specialists are allowed to repair the device.

Safety measures when using the device
Overheated fats and vegetable oils ignite quickly. Do not leave cooking food unattended (eg french fries).
Careless handling of the device may result in burns.
Remove all stickers and protective films from the glass ceramic hob.
Power cords should not touch hot surfaces of electrical appliances and hot kitchen utensils.
Switch off the cooking zones after each use.

Safety precautions when cleaning the device
Before cleaning, the device must be switched off and allowed to cool.
For safety reasons, do not clean the appliance with a steam cleaner or detergentssprayed at high pressure.

How to avoid damage to the instrument
The glass ceramic hob can be damaged by falling objects.
The edge of the glass ceramic hob can be damaged by impacts from the kitchen utensil.
Glass ceramics can be damaged by moving cast iron or aluminum cookware, or cookware with a damaged bottom.
Fusible substances and overflowing food may burn on the glass ceramic hob. Therefore, they should be removed as soon as possible.
Do not allow pots and pans to boil over. This could damage the cookware or glass ceramics.
Do not switch on the burners without cookware or with empty cookware.

Description of the device

Hob equipment

Control panel functional elements

Touch Control Fields
The device is controlled using the Touch Control fields. The required functions are activated by touching the sensor fields and confirmed with acknowledgment signals. Touch the touch fields from above without covering the other touch fields.

Sensoryfield		Function
	On off.	Switching the instrument on and off
	Increasing set values	Raising the heating stage / increasing the times
	Decrease of set values	Lowering the heating stage / decreasing the times
	Timer	Timer selection
	Blocking	Locking / unlocking the control panel
	Switching a three-circuit hotplate	Turning external heating zones on and off
	Frying zone	Switching the external heating circuit on and off

Indication

	Indication	Value
		The hotplate is switched off
	Keeping warm stage	Set to keep warm
	Heating stages	Heating stage set
	Boiling automation	Automatic boiling is activated.
	The problem	The instrument performed an erroneous operation
	Residual heat	The hotplate is still hot
	Child protection	Locking system / child protection included
	Safety shutdown	Safety shutdown activated

Residual heat indication

Warning! Residual heat from the appliance can cause burns. It takes some time for the cooking zones to cool down after switching them off. Observe the GD residual heat indication.

Residual heat can be used to reheat and keep cooked food hot.

Switching on and off external heating circuits

By switching the external heating circuits on or off, the total heating area of \u200b\u200bthe hotplates can be adjusted according to the size of the cookware.
Before switching on the external heating circuit, the internal heating circuit must be switched on.

Three-circuithotplate	Sensoryfield	Controlindicator
Switching on the middle heating zone	(D) Touch for 1-2 seconds	One control indicator is on
Turning on the external heating zone	О Touch for 1-2 seconds	Two control lights are on
Turn off the external heating zone	О Touch for 1-2 seconds	The second control indicator goes out
Switching off the middle heating zone	£) Touch for 1-2 seconds	The first control indicator goes out
Hotplateforfrying	Sensoryfield	Controlindicator
Switching on the external heating circuit	SZ Touch for 1-2 seconds
Shutdown of the external heating circuit	C5 Touch for 1-2 seconds

Locking and unlocking the control panel
To prevent accidental malfunction of the set parameters, for example by wiping the device with a cloth, the entire control panel, except for the On / Off touch field, can be locked.

When the device is turned off, the blocking mode is automatically canceled.

Application of automatic boiling
All four heating zones are equipped with automatic boiling.
If you set a heating level using the + sensor field, starting from parameter 0, the hotplate is switched on at full power for a specified time and then automatically returns to the set heating level.

	Panelmanagement	possiblestepsheating	Indication
Power on (only starting outwithmeaning0)	Touch the touch field +	FROM 1 BEFORE 8	(after 5 seconds)
Disconnection		from 8 before 1 / ABOUT	from 8 to 0
do not use	Touch the touch field -	from9 before 0	from 9 to 0

If the user selects a higher heat setting during the boil impulse, for example, switches from 3 to 5, then the boiling time will be adjusted. IF there is still residual heat in the hotplate (display H), the boiling pulse will not start.

The duration of the rapid boiling pulse depends on the selected heating level.

Stepheating	Durationmomentum[ min.: sec.]	forboil

Application of child protection
The child protection system prevents unauthorized use of the device.
Enabling child protection

The device turns off. Childproof lock is on.

Forced cancellation of child protection
By using the procedure below, you can separate food preparation; after that, it will temporarily reactivate the childproof lock.

Until the next shutdown, the device can be used as usual.

After forcibly canceling the childproof lock, the appliance must be set to a heating setting or function within about 10 seconds, otherwise it will automatically switch off.

Disabling child protection

The device turns off. Child lock is disabled.
Using the timer

If, in addition to setting the short-time timer, a heating level is also set for this hotplate, then this hotplate is switched off after the set time.

When the hotplate is switched off, the set timer function is also switched off.

Hotplate selection

	Control Panel	Indication
1.		The control zone flashes.	indicator
2.	Touch the WATCH touch field 1 time	The control zone flashes	indicator
3.	Touch the CLOCK touch field once	The control zone flashes	indicator
4.	Touch the CLOCK touch field once	The control zone flashes	indicator	fourth

After the indicator flashes have slowed down, you can set or change the heat setting for the hotplate.
If other timer functions are set, after a few seconds the shortest time of all timer functions appears and the corresponding indicator flashes.

Time setting

The time has been set.

Disabling the timer function

The control indicator goes out.

The timer function for the selected cooking zone is disabled.

Time change

After a few seconds, the flashing frequency of the control indicator decreases.

The time has been set.

The time counts down.

Display of the remaining cooking time

After a few seconds, the control light starts flashing more slowly.

Mute the beep

The beep stops.

Safety shutdown
Cooking zone
If, within about 10 seconds after switching on the cooking zone, the heating setting for any hotplate is not set, the cooking zone will switch off automatically.
If one or more of the sensor fields are covered for more than 10 seconds by any objects (saucepan, rag, etc.), a beep sounds and the hotplate switches off automatically.
If all cooking zones have been switched off, the cooking zone will switch off automatically after about 10 seconds.

Control Panel
If one or more sensor fields overlap for more than 10 seconds, a beep sounds. The beep is automatically muted when the sensor fields stop overlapping.

Hotplates
If at least one of the hotplates after a certain time is not turned off or the heating level is not changed, the corresponding hotplate will automatically turn off.

A note on acrylamide
According to the latest scientific research, intensive cooking of food products to obtain a golden brown crust is dangerous to human health due to the harmful effects of acrylamide. This is especially true for foods that contain starch. Therefore, we recommend that you cook food as low as possible and do not brown the food too much.

Cookware
Identify suitable cooking utensils by the base. The bottom should be thick and perfectly flat. Steel-enamelled pans, as well as pans with aluminum or copper bases, can leave stubborn or permanent marks on the glass ceramic hob that change the original color of the hob.

Saving energy

Only place cookware on the hotplate before switching on the latter.
Always cover pots with a lid whenever possible.

To take advantage of the residual heat, turn off the hotplates before finishing cooking.

The dimensions of the base of the pot and the hotplate must be the same.

Examples ofapplicationatcooking

The data in the following table are indicative only.

StepWayready— heatinginfluences		Appointment	Duration
		Residual heat, Off position
	Support— burningheat	Keeping warm prepared hot dishes	on demand	Cover the product
	Melted— dying	Hollandaise sauce, Melting butter, chocolate, gelatin		Stir occasionally
	Thickening	Whipped omelet, egg jelly		Cook under the lid
	Languor	Simmering rice and dairy dishes Warming up ready meals		Add water to the rice, increasing its quantity is at least twice. Dairy dishes occasionally stir
	Zapari— dyingLowering	Adding vegetables Stewing meat		Add to vegetables completely some water (no more than a few tablespoons)
	Cooking	Steaming potatoes		Use a small amount of liquid e.g. max. 1 L of water per 750 g potatoes
		Cooking significant volumes of food, thick soups and others	up to 3 liters of liquid plus 60-150 min. l dish ingredients
	Light frying	Schnitzel, sausages "Cordon bleu", chop cutlet, meatballs, raw sausages for frying, liver, flour gravy, eggs, omelet, frying donuts	continuous frying
	Intensi— clearfrying	Potato pancakes, roast tenderloins, steaks,	5-15 minutes on each side	Flip over from time to time
	Boil FrydyingFritirodying	Boiling plenty of water, boiling dumplings, frying meat (goulash, stewed roast), deep frying French fries

Washing and care

Caution! Residual heat from the cooking zones can cause burns.
Attention! Sharp and abrasive cleaning agents will damage the appliance. Clean the appliance with water and a mild detergent.

Attention! Residual cleaning agents will damage the device. Remove them with water and detergent.

Washing the appliance after each use
1. Wipe the appliance with a damp cloth and detergent added.
2. Dry the unit with a clean cloth.

Removing dirt
1. Position the scraper at an angle to the glass ceramic surface.
2. Use a sliding motion of the scraper blade to remove dirt.
3. Wipe the unit with a damp cloth and detergent.
4. Wipe the unit dry with a clean cloth.

	delete
Type of pollution	immediately	from a cooled device	through
Sugar, food with sugar content			cleaning scraper
Plastic, aluminum foil			pollution *
Traces of lime and water
Splashing fat			means for cleaning surfaces made of glass ceramics and of stainless steel*
Metallic stains that change the original surface color

* Scrapers, glass ceramic and stainless steel surface cleaners are available from specialist retailers
Remove particularly stubborn dirt with a glass ceramic or stainless steel cleaner.
Scratches and dark spots on glass ceramics cannot be removed, but they do not affect the normal operation of the appliance.

What to do, if…

The problem	Possible reason	Remedy
The hotplates do not turn on or do not work	More than 10 seconds elapsed after turning on the device	Switch on the appliance again.
		Deactivate the child lock (see section "Child lock")
	Simultaneous touch of multiple touch fields	Touch only one touch field
	Device safety shutdown has been triggered	Remove any foreign objects lying on the control panel. Switch on the appliance again.
	Childproofing enabled	Deactivate child protection (see section "Locking and unlocking the control panel")
The sound signal is triggered when the device is off	The control panel is completely or partially covered by an object	Delete item
residual heat indication.	The hotplate has just been switched on and has not yet warmed up.	If the hotplate is hot, contact the service center.
automation	There is still residual heat in the hotplate AND	Let the hotplate cool down.
	The maximum heating stage GD is set	The maximum heating setting provides the same cooking zone power as the automatic boiling.
	The heating stage was set by the sensor field ^	1. Switch off the hotplate. 1. Program the operation of the hotplate with the sensor field &
A beep sounds, the device turns on and turns off again after 5 seconds; after another 5 seconds, another beep sounds.	The sensor field "Ein / Aus" (On / Off) is covered by something, such as a rag.	Do not place anything on the control panel.
The Q indicator is on	The overheating protection of the hotplate has triggered	Switch off the hotplate. Turn it on again.
The indication (Y with a number	Electronic system error	Disconnect for a few minutes the appliance from the mains (remove home fuses electrical wiring). If after switching on the device indication B appears again, contact the service center.
The display shows (S and minus	too strong illumination of the control panel, such as strong sunlight	Cover the control panel briefly, eg with your hand. An audible signal sounds, the device switches off. (Again) switch on the appliance

If you are unable to rectify the problem with the above measures, please contact an authorized service center.

Warning! Only specialists are authorized to repair the device. Improper repairs can have dangerous consequences for the user of the device.
If you use the services of the service center on erroneous grounds, then the visit to the technician of the service center may be paid even during the warranty period.

Recycling

Packaging materials
The packaging materials are environmentally friendly and suitable for secondary use... Synthetic parts carry special markings, for example:\u003e PEP Installation instructions

Safety instructions
Observe the laws, regulations, directives and regulations of the country in which the appliance is installed. (These include safety requirements, rules and procedures for disposal, etc.).

The device may only be installed by a qualified specialist.

Observe the minimum spacing from other appliances and furniture.

A protective pallet must be installed under the appliance.

The cut surfaces in the worktop must be protected from moisture with a suitable sealing material.

The seal should connect the appliance to the table top so that no gaps are left.

Do not install the appliance in the immediate vicinity of doors or under windows. An open door or window that opens can tip over hot dishes in the cooking zone.

WARNING!

Danger of electric shock.

The mains supply connector is live.
Disconnect the power supply connector.
Follow the wiring diagram for electrical connections.
Observe safety rules when handling electrical appliances.
Correct installation of networked devices must reliably protect against contact with live parts.
A qualified electrician must connect the appliance to the mains.

ATTENTION!
Electrical problems. Loose and improperly installed plug connections can cause overheating of the connector.
The terminal connections must be technically properly installed.
The power cord must not be pulled tight.
For one- or two-phase connection, use a suitable power cord type H05BB-F Tmax. 90 ° (or higher).
If the power cord of this unit is damaged, it should be replaced with a dedicated power cord type H05BB-F Tmax. 90 ° or higher. It can be purchased from a service center.
During electrical installation, it is necessary to provide a device that allows you to disconnect the device from the network with a contact opening width of at least 3 mm in all poles.
Suitable disconnecting devices for this purpose are, for example, emergency switches, fuses (screw fuses must be removed from the holder), automatic safety switches and contactors.

It is simply indispensable in any kitchen, and the electric appliance Electrolux EHF 96547 XK (reviews note stylish and modern design products) especially, because he acts as a real helper in the house. Saves energy, heats up quickly and allows you to cook as well as reheat any dish.

Electrolux EHF 96547 XK: description

Electrolux EHF96547XK meets all modern quality standards. It has four burners that allow you to cook several dishes at the same time. Two of them have an additional expansion area. One is oval and the other is round. These hotplates can be used for dishes of non-standard sizes.

The control panel of the device is touch-sensitive. Here is the on / off button for the device, which works with one touch of your finger. The child lock is active. The control panel can be completely locked or unlocked if necessary. There is a Stop + go mode, as well as a button to disable and enable the external circuit. During the operation of the device, the automatic heating mode is often used.

The panel displays the heating power, which can be set using a special ruler. Indicates which hotplate is in use. There is also a countdown timer that allows you to determine the operating time of the hotplate. The OptiHeat Control indicator notifies how cold the Electrolux EHF 96547 XK panel is.

The surface type of the device is electrical. Work zone made of glass ceramics. requires a careful attitude and caring care.

Electrolux EHF 96547 XK device: specifications of technical parameters

As mentioned earlier, the product has four Hi-Light burners. The front left has a rated heating power of 800/1600/2300 W, which corresponds to the following surface diameter: 120/175/210 mm. The rear left and front right cooking zones have a heating power of up to 1200 W and a diameter of 145 mm. The rear right burner is an elongated oval shape and can have diameters of 170 and 265 mm with powers of 1500 and 2400 W, respectively.

Household appliances Electrolux EHF 96547 XK are powered by a radiant heater. The characteristics of the product are noted for the touch control panel, which starts its functions with just one touch of your finger. Available - sound notification, emergency shutdown of the device. There is a self-diagnosis of possible malfunctions. The unit has an automatic switch-on, as well as indicators of power, residual heat and cooking time. Residual heat can be used for cooking, which will significantly reduce energy costs. The power consumption of the device is 7.1 kW. The width of the unit is 59 cm, its depth is 52 cm, and the height is 11.8 cm.The width of the niche of the product is 56 cm, and the depth is 49 cm. Weight household apparatus - 7.9 kg.

Available in black with gray stainless steel edging, model Electrolux EHF 96547 XK. The country of origin of this product is Germany. The warranty for this product is issued for one year.

Installing the appliance

Before installing the Electrolux EHF 96547 XK panel (reviews note that the product fully fulfills all the functions declared by the manufacturer), you should rewrite all the technical characteristics that are on the bottom of the device. Then the device is mounted in kitchen furniturespecially designed for built-in hobs. Household appliances are manufactured together with a power cord.

The electric hob should be located 50 cm from wall cabinets and at the same distance from walls and other surfaces. A protective floor is installed under it. In more detail, the installation of the device is described in the instruction manual for the Electrolux EHF 96547 XK. The connection to the mains is made only after the complete installation of the panel.

Do not connect the machine to and from an extension cord. When connecting, the wire must be fixed, and the plug must fit snugly against the outlet.

About using the product

The built-in hob (electric) turns on with one touch of the power indicator. The control program includes an automatic switch-off function that switches off the device if:

• all burners are completely switched off;
• power is not set after turning on the device;
• the control panel is filled with some kind of liquid or provided that there is a foreign object on it for more than 10 minutes;
• the hotplate is not switched off and the heating power remains unchanged.

Before switching off the appliance, the hob emits a characteristic sound signal.

If the heating power is at the level of 1-3, then the device will turn off after six hours. If the reading is 4-7, the device will automatically stop working after five hours. At the 8-9 mark, the panel will turn off after 4 hours. If the heating power is at 10-14, then the device stops working after 1.5 hours.

To turn on the power, you need to click on the required mark on the panel ruler. You can set the power by sliding your finger along the ruler to the desired parameter. If the hotplate is not working, the control panel displays O. When the hotplate is operating, a power display from 1 to 14 appears. Half zero means that the Stop + go function has been started. If the letter E plus some number is displayed on the panel, this indicates a possible malfunction of the device.

The two cooking zones on the hob have several operating circuits that can be switched on and off using the corresponding buttons. This function allows you to use different sizes of cookware for cooking.

When cooking, you can use the "Automatic heating" function (indicator A). This mode heats up the hotplate faster. First he heats it up to maximum power, and then reduces the temperature to the required one.

The Stop + go function switches all cooking zones to a lower heat setting. When enabled, the power level cannot be adjusted. This mode does not affect the operation of the timer in the Electrolux EHF 96547 XK.

The instruction notes that during the operation of the device, you can completely lock the control panel, use the child protection mode, which excludes accidental switching on of the product. Its inclusion is indicated by the burning letter L on the control panel.

The OffSound Control button indicates the level of residual heat. Three sticks indicate that the hob is working and cooking is in progress, two indicate keeping warm and one indicating residual heat.

Household appliance care

The electric hob Electrolux EHF 96547 XK needs careful and attentive care. Its surface should be rinsed after every cooking. Before placing the dishes on the panel, make sure that the bottom is clean. The cooking appliances are not affected by scratches and dark spots. To clean the surface from dirt, use a special cleaner for hobs and a glass scraper.

If hot plastic, food containing sugar or a plastic bag gets on the appliance, they must be removed immediately. For this, the scraper is tilted at an acute angle (45 °) and thus the panel is gradually cleaned. All other contaminants are removed after the Electrolux EHF 96547 XK has completely cooled down. The control panel requires the same care as all other parts of the appliance.

Saving energy

The Electrolux EHF 96547 XK hob will significantly help save energy when cooking. The operating manual recommends using the following tips for this purpose:

• Place cookware before switching on the hotplate.
• The dimensions of the container base and the burner must be identical.
• Small containers should be placed on the appropriate cooking zones.
• Place dishes on the center of the hotplate.
• If water is heated, then it needs to be poured a little more than required.
• It is recommended to cover the pot with a lid when preparing food.
• Residual heat can be used to melt food and keep food hot.

The built-in hob (electric) requires special treatment. So, for cooking on it, you should choose containers with a thick and flat bottom. If the container is made of aluminum, copper or enamel, then this can affect the discoloration of the hob.

For economy, use the ÖkoTimer function, which turns off the hotplate shortly before the countdown timer sounds.

• Heating power up to one in Stop + go mode. Keeps food warm.
• One to three. In this mode, meals can be cooked from 5 to 40 minutes. This is hollandaise sauce, melting food, thickening eggs, omelet.
• Three to five. Rice and dairy dishes are prepared. You can reheat cooked food. The working process takes 25-50 minutes.
• Five to seven. Cooking vegetables, fish and meat dishes for a couple. The whole process takes 20 to 45 minutes.
• Seven to nine. Steamed potatoes are prepared. Cooking time is from 20 to 60 minutes.
• Nine to Twelve. Easy frying of food. Cooking pancakes, donuts, eggs.
• Twelve to thirteen. Strong roasting of meat and fish dishes. The cooking time is 5-15 minutes.
• Mode fourteen. Boiling water. Boiling cereals. Cooking roasts and goulash. Deep-frying.

The hob is easy to operate. To cook on it, you do not need special skills, it is enough to carefully study the instructions in detail.

Safety engineering

Before installing and using the equipment, you must study the operating manual. Remember that improper installation of the appliance can cause injury and damage. With a lack of skills in installing built-in hobs, it is better to entrust this work to professionals.

Children should not be allowed to play with the product and packaging materials From him. Do not allow children, as well as pets, to the working device or when the panel has not cooled down enough. It should be remembered that during operation all parts of household appliances become very hot. Always use the child lock function. Children under the age of three should not be near the panel, especially if adults cannot provide adequate supervision.

It is forbidden to start the device in operation from an external timer. Do not leave food that is cooked in oil or fat on the surface of the panel, as this may cause a fire. When frying in oil, cover the dishes with a lid. If a fire breaks out, the appliance should be unplugged immediately and covered with a blanket.

Do not place various objects on the hob. This also applies to metal products: knives, spoons, forks, lids, etc. Do not clean the device with a steam cleaner.

If cracks have formed on the glass-ceramic surface or it has begun to crack, then such a device cannot be used, but it should be disconnected from the electricity so that it does not shock. If the power cord is damaged, it must be replaced at the nearest service center.

The appliance must be installed only a qualified specialist... Do not install a damaged device. Observe the operating instructions when installing the product.

All necessary clearances between furniture and electrical appliances must be maintained. The cut surfaces of the countertop, into which the panel will be mounted, must be lubricated with a sealant in order to prevent the wood from swelling under the influence of moisture.

The technique must be protected from moisture and steam. It is not installed near doors and windows. Otherwise, the cookware may fall off the panel when the door or window is opened. If the built-in panel is located above the drawers that slide out, then there must be sufficient space between them for air ventilation.

The bottom of the hob gets very hot during operation, so there must be a fireproof gasket under the appliance to prevent penetration into the appliance from below. The product must be connected to the mains by an electrician. The hob must be grounded. Care and cleaning of the device should be carried out only with the panel disconnected from the socket.

Before putting the product into operation, make sure that the parameters of the device correspond to the parameters of the electrical network in the apartment. Before using the device, make sure it is installed correctly. A loose cord or a loose plug in the outlet can cause overheating of the contacts. Do not use a power cord from another appliance for the built-in hob. It is necessary to ensure that the electric wires do not get tangled with each other, and the cord is not too taut. If the outlet is near the panel, make sure the cord does not swing. It should not touch the appliance and hot dishes, as it may melt if touched. It is forbidden to use extension cords and tees when connecting the panel.

Remove all packaging, protective film and stickers before first use. The device is intended for residential use only. When installing it, the ventilation openings must not be covered.

The device must not be left unattended or touched with wet hands. Do not touch the device if water gets on it. First you need to disconnect it from the electrical network.

The cost

Has a quite acceptable cost for equipment of a similar level Electrolux EHF 96547 XK. The price of the device ranges from 14.5 to 20 thousand rubles. The lowest cost of the product is noted in the retail outlets "Technostudiya", "Megabit", "Eldorado", "Technosila", "OGO".

Distinctive features any devices (like) produced by the Swedish company Electrolux mean reliability during operation, perfect design and affordable cost. All this applies equally to such household applianceslike an Electrolux hob.

And a device such as a combined hob Electrolux combines both gas and electric burners. This option is in demand by those consumers whose areas of residence experience interruptions in the supply of electricity and gas.

The hotplates can have different size, shape and number (from 2 to 5), including one or more burners that provide ultra-fast heating like y.

2 Popular models, prices

Each version of the hob is good in its own way, but Electrolux glass-ceramic hobs are considered to be the "squeak of fashion" today. Elegant appearance, high functionality, ease of care, affordable price elevate these panels to the peak of their popularity.

Popular models are represented by the following options:

• Electrolux EHH 16340 FK
• Electrolux EHF 6547 FOK
• Electrolux EGG 6343 NOW
• Electrolux EGT 6342 NOX
• Electrolux EGT 7353 YOK
• Electrolux EHF 16240 XK
• Electrolux EHG 6435 X
• Electrolux EHH 3920 BOK
• Electrolux EHI 6740 FOK etc.

As for the price of the Electrolux hob, it varies between $ 250 - $ 1,100. But it will cost 30-40 USD.

2.1 Hob videos

If you decide to buy an Electrolux hob, you should know that the size of the cookware matters during the operation of gas and glass-ceramic hobs. In order for the heating to be uniform and the cooked food to be of high quality, pots and pans must correspond to the size of the heating zone. This is an example of the principle of work.

Thus, you will have the opportunity to save energy, which will not be wasted, but will go exclusively to heating the bottom of the dishes.

If you choose an induction independent hob Electrolux, then you do not have to worry about the safety of your household. The induction hob only heats the bottom of the cookware, while the surface itself remains relatively cool.

The risk of getting burned here is completely excluded, which is especially important for those families with small children.

Olga 2377

I have been using the Electrolux REX electric hob, model KT6421XE, for about a year. In my almost white kitchen, a black glass ceramic panel with a stainless steel-colored frame looks very stylish and advantageous. In addition, this frame protects against overflowing liquid, the tabletop is always clean.

4 HiLight burners, three round, the lower left has three heating zones, and the upper right circle + oval. We chose it specifically with such an extension, since we often use the duckling. Unfortunately, there is not enough power to use all 4 cooking zones at the same time. And even three, if everyone works at the maximum, but this happens, quite, rarely, so I have time to cook and fry everything.

The control panel is touch-sensitive, quite comfortable. The commands are confirmed by beeps and the information is shown on the display. The scale is from 0 to 14, but you can only cook at 12-14, the rest is for heating food.

Through trial and error, I still adapted and made friends with our Rex. In general, I am satisfied with the panel and its functions, however, I do not cook a lot and deliciously. An excellent function of "automatic heating", it really saves time, the surface itself sets the maximum heating level for a particular burner, and when the water boils, it automatically switches the heating temperature to a pre-selected figure.

I am absolutely delighted with the "countdown timer" function. The timer can be set simultaneously for all four cooking zones. After selecting the desired hotplate, I set the minutes and select the desired power. After the preset time has elapsed and a beep sounds, the hotplate switches off automatically. That is, knowing the exact proportions, you can cook a simple dish without standing next to the stove. For example, in the morning I leave a Turk with coffee for two cups for 6 minutes at the 14 mark, and I can get ready without worrying that the coffee will run away or boil away. Or I ask 25 minutes at the 10 mark, and cook buckwheat porridge while walking with the child on the street. There is also a countdown from the start of cooking. This timer is designed to control the operating time of the burner, but personally I have never used it.

Prices in online stores:

		entero.ru	1 790 RUB
		entero.ru	7 220 RUB

Prices in online stores:

Best Kitchen

8 607 R

The function of automatically turning off the hob is quite convenient if liquid is spilled on it or there is something on the hob for more than 10 seconds (a saucepan or oven mitt). Before the hob shuts down, a warning beep will sound for a few seconds, so there is time to remove the item if it gets there by accident.

I constantly use the "lock" function. This function allows you to lock the control panel, which prevents accidental switching off or changing the heating power. When the work is finished and the hob is turned off, this function turns off automatically.

I have never used the STOP + GO function. I do not quite understand for what occasion it is intended. When this function is activated, all active cooking zones are set to minimum. In this case, the heating power can no longer be changed, but the "Timer" function remains active. When you deactivate the STOP + GO function, the previously used hotplates automatically return to the preheating power. What this gives me is not clear, since the residual heat at the burners is quite strong, and the dish can "reach" even when the stove is off.

But the function "Childproofing" was simply necessary for me. This function prevents accidental switching on and using the hob, and in a house where two inquisitive kids a lot of accidents happen. If this function is canceled for one cooking cycle and after the stove is turned off, the "protection" will turn on again. Very comfortably!

Manufacturers recommend cleaning hob after every cooking, but I can't do that. Therefore, small dark spots and scratches appeared on the glass ceramics, but they do not affect the quality of the surface.

Prices in online stores:

		entero.ru	2990 RUB