Features of hobs Electrolux (Electrolux). Rules for using induction cookers Remedy

Operating Instructions Glass-ceramic hob EHS60210P 2 electrolux Electrolux. Thinking of you. Share your thoughts with us at www.electrolux.com Contents Safety information Installation Product description Operating the appliance 2 3 5 6 Helpful tips and tricks Care and cleaning Safety Instructions For your own safety and proper use of the machine, please read this manual carefully before installing and using the machine. Always keep these instructions with the machine, even if you transfer or sell it. Users must have a good knowledge of how the machine works and the safety rules for its operation. General safety instructions WARNING! Persons (including children) with impaired physical, sensory or mental capabilities or lack of experience or knowledge should not use this appliance. They must be supervised or receive instructions from a person responsible for their safety. Child safety This appliance may only be operated by adults. Children must be supervised to ensure that they do not play with the appliance. Keep all packaging materials out of the reach of children. There is a risk of suffocation. Keep children away from the appliance when it is turned on. ATTENTION! Turn on child lock to prevent small children and pets from accidentally turning on the appliance. Safety during operation Before using the device, remove all packaging, stickers and film from it. Switch off the cooking zones after each use of the appliance. Risk of burns! Do not place cutlery or pot lids on the hob as they may become hot. ATTENTION! Fire hazard! superheated fats and vegetable oils ignite very quickly. Proper use Never leave a running appliance unattended. Only use the appliance for domestic cooking! Do not use the appliance as a work table or as a stand for any objects. Do not place or store flammable liquids or materials or fusible objects (such as plastic or aluminium) on or near the instrument. electrolux 3 Be careful when connecting the appliance to nearby sockets. Do not allow electrical cables to come into contact with the appliance or hot dishes. Do not tangle electrical wires. How to prevent damage to the appliance The glass ceramic hob can be damaged if objects or dishes fall on it. Glass ceramic can be scratched by moving cast iron or aluminum cookware or cookware with a damaged bottom on it. Do not allow all the liquid to boil away from the cookware to avoid damage to the cookware and glass ceramics. Do not turn on the burners without cookware on them or with empty cookware. Never cover any part of the appliance with aluminum foil. ATTENTION! If a crack appears on the surface, turn off the power supply to avoid electric shock. Installation Before installation, write down the following information from the rating plate: Model name (Modell) ................ Product number (Prod. Nr.) ...... ....... .... Serial number (Ser. Nr.) ............... The rating plate is affixed to the bottom of the instrument housing. 949 594 178 00 EHS60210P 58 HAD 56 AO 220-240 V 50-60 Hz 7.1 kW ELECTROLUX Safety instructions ATTENTION! Be sure to read this! Make sure that the device has not been damaged during transport. Do not connect a damaged appliance. If necessary, contact your supplier. This appliance may only be installed, connected or repaired by an authorized technician. Use only original spare parts. Only use built-in appliances after embedding this appliance in suitable furniture and work surfaces that comply with standards. It is forbidden to make changes to specifications or the design of this product. This may result in damage to the appliance or injury. Strictly comply with the laws, ordinances, regulations and standards (safety regulations, rules and procedures for disposal, electrical safety regulations, etc.) in force in the country in which the appliance is installed! Observe the minimum permitted distances from neighboring appliances and furniture! Ensure protection against electric shock, eg install drawers only if there is a protective bottom directly below the appliance. The cutting surfaces in the worktop must be protected from moisture with a suitable sealant. Firmly connect the appliance to the work surface without gaps using a suitable sealant! Protect the underside of the appliance against steam and moisture, e.g. from a dishwasher or oven! 4 electrolux Do not install the appliance near doors or under windows! Otherwise, the dishes may tip over from the hob when doors or windows are opened. ATTENTION! Risk of electric shock. Follow the electrical connection instructions carefully. The power supply socket is energized. De-energize it. Correct installation connected devices must be reliably protected from contact with live parts. Loose and incorrectly installed plug connections can cause the connector to overheat. The wires to the terminals must be connected by a qualified electrician. The power cable must not be pulled tight. In the case of a single-phase or two-phase connection, use the appropriate power supply cable type H05BB-F, rated for a maximum temperature of 90°C (or higher). A damaged power cable must be replaced with a special cable (type H05BB-F, rated for a maximum temperature of 90°C or more). Contact an Authorized Service Centre. The appliance must be equipped with an electrical device that allows the appliance to be disconnected from the mains with a gap between all contacts of at least 3 mm. Suitable isolating devices must be used: safety circuit breakers, fuses (threaded fuses must be unscrewed from the socket), residual current circuit breakers and starters. Mounting min. 50 mm R 5mm min. 500 mm min. 50mm = 600mm 490+1mm 560+1mm = min. 25 mm min. 20 mm electrolux 5 min. 30 mm Description of the product Functional elements of the hob 1 145 2 mm 170 mm 265 mm 5/210 175 120/mm 145 mm 3 1 2 3 4 5 Semi -circuit burner 1200 watts 1500/2400 watts single -circuit burner 1200 watts Trick -circuit confront 800 /1600/2300 W 5 6 7 4 Functional elements of the control panel 1 2 3 4 14 13 12 11 8 10 The device is controlled using touch keys. touch button 1 function switch the hob on and off 9 6 electrolux touch button 2 toggle button 3 locks with indicator function switch the key lock or child lock function on and off switch the STOP+GO function on and off with indicator switch on the automatic heating function 4 5 The cooking zone indicators in timer mode show the cooking zones for which the timer has been set 6 Timer display Displays the time in minutes 7 Heating power level indicator Displays the set heating power level 8 Button for switching the oval cooking zone on and off 9 Automatic indicator shutdown 10 11 with indicator residual heat indicator control bar display of the hot state of the heating zone setting the heating power level selection of the heating zone 12 13 14 indication of the activated automatic switch-off function increasing or decreasing the time / key with indicator turning the external circuits of the heating zones on and off Indicators on the display Visual and audible indication of function operation Display Description Cooking zone has not yet cooled down (residual heat) Two circuits of the three-circuit heating zone are switched on All circuits of the three-circuit heating zone are switched on External circuit of the oval heating zone is switched on + number Fault Automatic switch-off mode is switched on Residual heat indication ATTENTION! Risk of burns due to residual heat! Instrument operation Switch on and off for 1 second to Touch to turn the instrument on or off. Automatic shutdown hob switches off automatically if: all cooking zones are switched off. the heat setting is not set after switching on the hob; the sensor key is covered by an object (dishes, cloth, etc.) for more than 10 seconds. An audible signal sounds for a while and the hob switches off. Remove the item or wipe down the control panel; electrolux 7 panel turns off. See tables - You have not switched off the hotplate or not the right one. change the heating level. After a while, the cooker also lights up Time after which the automatic switch-off takes place Heating level - - Switches off after 6 hours 5 hours Setting the heating power level 4 hours 1.5 hours Power level selector. The indicator for the automatic quick heat-up function lights up and goes out after a while. The operating time of the automatic fast heating function depends on the selected heating power level. 11 10 9 Touch the desired power level on the control bar. The power level indicators will light up. / Switching the external heating circuit on and off You can adapt the effective heating surface to the size of the pan. To turn on the outer circuit, touch / touch the touch key. The indicator lights up. To switch on additional external circuits, touch the same sensor key again. The following indicator lights up. To turn off the outer circuit, repeat the same steps. The indicator goes off. Automatic heating The automatic fast heating function sets the maximum heating power level for a while and then reduces it to the required level. This makes it possible to reach the desired heating power level in a shorter time. Touch A . The indicator will start flashing. Set the heating power level (1-8). The indicator light 8 7 6 5 4 3 2 1 0 1 2 3 4 5 6 7 8 9 lights up. Using the timer Countdown timer The countdown timer is used to set the cooking time for a cooking zone. The countdown timer should be set after selecting a hotplate. The heat setting can be selected before or after setting the timer. Selecting a hotplate: touch several times until the indicator light for the required hotplate lights up. 8 electrolux Start the countdown timer: touch the timer to set the time (00 - 99 minutes). When the flashing of the cooking zone indicator slows down, the countdown starts. View remaining time: Select a hotplate with . The cooking zone indicator flashes faster. The display shows the remaining time. Adjusting the countdown timer: select hotplate with, touch or. Switching off the timer: select the hotplate with . Touch. The remaining time counts back to 00 . The hotplate indicator goes out. To switch off, you can also touch and at the same time. After the set time has elapsed, an audible signal sounds and 00 flashes. The hotplate switches off. Turn off the acoustic signal: touch CountUp Timer The CountUp Timer is used to keep track of how long a cooking zone has been running. Selecting a hotplate (if more than one hotplate is in operation): Touch several times until the indicator for the desired hotplate lights up. Turn on the CountUp Timer function: touch the timer and it will turn on. When the hotplate indicator flashes slower, the time counts straight on and the display switches between and elapsed time (in minutes) Viewing elapsed time: select a hotplate with . The cooking zone indicator flashes faster. The display shows the elapsed time. Turn off the CountUp Timer: Select a cooking zone with and touch or to turn off the timer. The cooking zone indicator goes out. Timer The timer can be used to keep track of when the cooking zones are not in use. Touch. Touch or to select the time. After the set time has elapsed, an audible signal sounds and 00 flashes. Activating the STOP+GO function puts all cooking zones that are in operation into keep warm mode. Tap to enable this feature. The symbol lights up. Tap to turn off this feature. The previously selected heating level is switched on. does not stop the timer. The function completely blocks the control panel, except for the touch key. Locking/unlocking the control panel You can lock the control panel except for the key. This prevents accidental changes in heating power. Lights up Touch the symbol. display. The timer continues to run. to de- Touch the symbol to turn off this function. The display turns off. When the appliance is switched off, this function is also deactivated. Child lock This function prevents accidental use of the hob. Switching on the child lock Switch on the hob using. Do not set any heating power level. Touch within 4 seconds. The indicator lights up. Switch off the hob using. Deactivating the child lock Switch on the hob using. Do not set any heating power level. Touch within 4 seconds. The indicator goes out. electrolux 9 Switch off the hob using . Cancel the child lock for one cooking cycle Switch on the hob with . The indicator lights up. Touch within 4 seconds. Select the heating power value within 10 seconds. The hob can be used. After switching off the hob with the childproof lock, it is switched on again. OffSound Control Turn off the sound signal Turn off the instrument. Touch for 3 seconds. The indicators will turn on and off. Touch for 3 seconds. Lights up, the device is in standby mode. , lights up, beeps Touch to turn off the sound. The beeper stops, except when you touch it, after the reminder timer or countdown timer has elapsed, or when you cover the control panel. Switching on the sound signal Turn off the device. for 3 seconds. Ind- Touch the lights will turn on and off. Touch for 3 seconds. Lights up because the buzzer is disabled. Touch, lights up, appliance is in standby mode. Beep is on. Useful tips and tricks Cookware The bottom of the cookware should be as thick and flat as possible. Cookware made of enamelled steel, as well as cookware with an aluminum or copper bottom, may cause discolouration of the glass ceramic surface. Saving energy Always cover pots with lids whenever possible. Before turning on the burner, put the dishes on it. Switch off the cooking zones before the end of cooking in order to use the residual heat. Heat setting 1 The bottom of the pan and the cooking zone must match. Öko Timer To save energy, the hotplate heater switches off automatically a little before the countdown timer signals. The shortening of the heat-up time depends on the heat setting and the cooking time. Examples of using the hob The data in the following tables are guide values. Purpose: Time To keep cooked food warm as required Suggestion Cover 10 electrolux Heat setting Purpose: Time Suggestion 1-2 Hollandaise, melt butter, chocolate, gelatine 5-25 min Time from stir 1-2 Thickening: beaten omelet, bagged eggs 10-40 mins Cook covered 2-3 Simmer rice and milk dishes, reheat cooked meals 25-50 mins Add at least double the water more than rice. Stir milk dishes occasionally 3-4 Steam vegetables, fish, meat 20-45 min Add a few tablespoons of liquid 4-5 Steam potatoes 20-60 min Use max. 1/4 l water for 750 g potatoes 4-5 Boil large amounts of food, stews and soups 60-150 min Up to 3 l liquid plus ingredients 6-7 Light frying: escalopes, veal cordon bleu, chops, meatballs , sausages, liver, flour sauce, scrambled eggs, pancakes, doughnuts as required 5-15 mins Turn halfway through the cooking time 9 Boil large amounts of water, boil pasta, sauté meat (goulash, pot roast), deep fry potatoes Information on using acrylamide IMPORTANT! According to the latest scientific research, frying foods (particularly starchy foods) can pose a health risk due to the formation of acrylamide. Therefore, we recommend frying foods at the lowest possible temperature and not frying them until they form a deep brown crust. Care and cleaning Clean the appliance after each use. Always use cookware with a clean bottom. ATTENTION! Sharp objects and abrasive cleaners can damage the appliance. For your own safety, it is not allowed to clean the appliance from dirt with steam cleaners or pneumatic cleaners. scratches or dark spots on glass ceramic do not affect the operation of the appliance. Removing dirt: 1. – Remove immediately: melted plastic, plastic wrap and foodstuffs containing sugar. Use a special glass ceramic scraper. Position the scraper at an acute angle to the glass ceramic surface and move it along the surface. electrolux 11 – Switch off the appliance and let it cool down before each cleaning: lime deposits, water marks, grease splashes, shiny discolourations. Use special cleaners for glass ceramic or stainless steel surfaces. 2. Clean the device with a damp cloth and a little detergent. 3. Finally, dry the appliance with a clean cloth. If the appliance does not work … Fault Possible cause of the fault and how to solve it The appliance does not turn on or does not work. Switch on the appliance again and set the heating power level within 10 seconds. Key lock or child lock is on. Deactivate the key lock or the child lock function . See section "Child lock" or "Stop + Go function". You touched 2 or more sensor keys at the same time. Touch only one sensor key at a time. The control panel has been splashed with water or grease. Wipe the control panel. An audible signal sounds when the appliance is switched off. One or more sensor keys are covered by a foreign object. Remove the foreign object from the touch keys. Wipe down the control panel. The residual heat indicator does not light up. The heating zone did not have time to heat up, because. was switched on for a short time. If the cooking zone becomes hot, contact your local Authorized Service Centre. The external heating circuit does not turn on. First turn on the internal heating circuit. An audible signal sounds, the device turns on and off again. After 5 seconds, another beep sounds. You covered the touch key with an item from the touch key. The symbol lights up Automatic switch-off is triggered. Switch off the appliance and switch it on again. . Remove the foreign and digit- Malfunction of the device. Unplug the appliance from the power supply for a few minutes. Remove the fuse from your apartment's electrical distribution board. Switch on the device again. If the symbol lights up again, contact your local Authorized Service Centre. No beep when touching the control panel keys. The audible alarm is off. Switch on the audible alarm. Ra symbol lights up. If the above methods fail to solve the problem, please contact your dealer or service center. Give the details on the rating plate, the three-digit code for the glass ceramic (it is located in the corner of the hob) and the error message that appears. 12 electrolux If you misused the appliance, the maintenance provided by the service center or the dealer will be charged, even if the warranty period has not yet expired. Refer to the warranty booklet for maintenance instructions and warranty conditions. Environmental protection The symbol on the product or on its packaging indicates that this product must not be disposed of as household waste. Instead, it should be handed over to an appropriate collection point for electronic and electrical equipment for recycling. By ensuring this product is disposed of correctly, you will help prevent potential harm to the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more information about recycling of this product, please contact your local authorities, your waste collection and disposal service, or the shop where you purchased the product. Packaging materials The packaging is made from environmentally friendly materials and can be recycled. Plastic parts are marked with the material they are made of: >PE< (по‐ лиэтилен), >PS< (полистирол) и т.п. Упаковочные материалы следует выбрасывать как бытовые отходы в соответствующие контейнеры мест‐ ных служб по утилизации отходов. electrolux 13 14 electrolux electrolux 15 www.electrolux.com www.electrolux.ru 892935496-A-102009

Glass-ceramic surface

EHS 6651P

User manual

Please be sure to follow these rules, otherwise the user loses the right to warranty service if a malfunction occurs in the device.

This appliance complies with the following EU directives:
- 73/23/EWG of 02/19/1973 "Regulations on low voltage" - 89/336/EWG of 03/05/1989 "Regulations on electromagnetic compatibility”, including amendments to regulations 92/31/EWG
- 93/68/EWG of 22.07.1993 "Regulations on CE identification marks"

Proper operation
This appliance may only be used for cooking and frying. food products at home.
It cannot be used as a desktop or storage space for any items.
Any reconfiguration and changes in the design of the device are unacceptable.
Flammable liquids, flammable materials or fusible objects such as film, foil, plastic, aluminum, etc. must not be placed on or stored on or near the device.

Safety measures for children
Keep small children away from the appliance at all times.
Older children should only use the appliance under the guidance and supervision of an adult.
To prevent accidental activation of the appliance by small children or pets, we recommend that you activate the child safety lock.

General security measures
Installation and connection of a new device may only be carried out by trained and qualified personnel.
Built-in appliances can only be used after they have been installed in built-in cabinets and worktops that meet the required technical standards and are suitable for such operation.
In the event of malfunctions in the operation of the device or damage to the glass ceramic (breaks, breaks or cracks), the device must be turned off and disconnected from the mains in order to avoid possible electric shock.
Repairs to the appliance may only be carried out by trained and qualified personnel.

Safety Precautions When Using the Instrument
Overheated fats and vegetable oils ignite quickly. Do not leave unattended foods that are being prepared (for example, "fries").
In case of careless handling of the device, you can get burned.
Remove all stickers and protective films from the glass ceramic hob.
Power cords should not touch hot surfaces of electrical appliances and hot cookware.
Switch off the burners after each use of the appliance.

Safety Precautions When Cleaning the Instrument
Before cleaning, the appliance must be switched off and allowed to cool down.
For safety reasons, the appliance must not be cleaned with steam cleaners or detergents sprayed at high pressure.

How to avoid damage to the device
The glass ceramic hob can be damaged by falling objects.
Striking cookware can damage the edge of the glass-ceramic hob.
Glass ceramics can be damaged by moving cast iron or aluminum cookware, or cookware with a damaged bottom.
Fusible substances and food that has overflowed as a result of boiling can burn on the glass-ceramic hob. Therefore, they should be removed as soon as possible.
Do not allow liquid to boil out of pots and pans. Doing so may damage the cookware or glass ceramics.
Do not operate the burners without cookware or with empty cookware.

Description of the device

Hob equipment

Functional elements of the control panel

Touch control fields
The device is controlled using touch fields Touch Control. The desired functions are activated by touching the sensor fields and are confirmed by acoustic feedback signals. Touch the sensor fields from above without covering other sensor fields.

touchfield		Function
	On off.	Switching the appliance on and off
	Increasing set values	Increasing the heating stage/increasing times
	Reducing set values	Lowering the heating level/reducing the times
	Timer	Timer selection
	blocking	Control panel lock/unlock
	Switching the three-circuit hotplate	Switching on and off external heating zones
	Frying zone	Switching the external heating circuit on and off

Indication

	Indication	Meaning
		Hotplate off
	Keep warm stage	Keep warm setting installed
	Heating steps	Heat setting set
	Automatic boiling	Boiling automatic is activated.
	Malfunction	The device performed an erroneous operation
	Residual heat	The burner hasn't cooled down yet
	Childproofing	Child lock/safety system on
	Safety shutdown	Safety shutdown activated

Residual heat indication

Warning! Residual heat from the appliance can cause burns. It takes some time for the hotplates to cool down after they have been switched off. Observe the residual heat indicator GD.

The residual heat can be used to reheat and keep cooked food hot.

Switching on and off external heating circuits

By turning the external heating circuits on or off, you can adjust the total heating area of ​​the burners depending on the size of the cookware.
Before switching on the external heating circuit, the internal heating circuit must be switched on.

Three-circuitburner	touchfield	Controlindicator
Switching on the middle heating zone	(G) Touch for 1-2 seconds	One indicator light is on
Switching on the external heating zone	o Touch for 1-2 seconds	Two indicator lights are on
Switching off the external heating zone	o Touch for 1-2 seconds	The second control indicator goes out
Switching off the middle heating zone	£) Touch for 1-2 seconds	The first control indicator goes out
burnerForfrying	touchfield	Controlindicator
Switching on the external heating circuit	SZ Touch for 1-2 seconds
Shutdown of the external heating circuit	C5 Touch for 1-2 seconds

Locking and unlocking the control panel
In order to avoid accidental failure of the set parameters, for example, as a result of wiping the device with a cloth, the entire control panel, with the exception of the On/Off touch field, can be locked.

When the device is turned off, the blocking mode is automatically canceled.

The use of automatic boiling
All four heating zones are equipped with automatic boiling.
If the heat setting is set using the touch field + , starting from parameter 0, the hotplate is switched on at full power for a certain time and then automatically returns to the set heat level.

	Panelmanagement	possiblestepsheating	Indication
Power on (only beginningcovalues0)	Touch the touch field +	FROM 1 BEFORE 8	(after 5 seconds)
Shutdown		from 8 before 1 / ABOUT	8 to 0
do not involve	Touch the touch field -	from9 before 0	9 to 0

If the user selects a higher heat setting during the Boil pulse, e.g. from heat setting 3 to 5, then the boil time will be adjusted. IF there is still residual heat in the cooking zone (display H), the boil pulse will not be activated.

The duration of the rapid boiling pulse depends on the selected heating level.

stepheating	Durationmomentum[ min.: sec.]	Forboiling

Applying child lock
The child safety system prevents unauthorized use of the appliance.
Enabling Child Lock

The device turns off. Child lock is on.

Forced override of child lock
With the following procedure, you can cook food separately; After that, it will deactivate childproofing for a while, reactivated again.

Until the next shutdown, the appliance can be used normally.

After forcibly deactivating the child lock, the appliance must be set to a heating level or function within approx. 10 seconds, otherwise it switches off automatically.

Disabling Child Lock

The device turns off. Child lock is disabled.
Using the timer

If, in addition to setting the short-time timer, a heat setting is set for a given hotplate, the hotplate switches off after the set time has elapsed.

When the cooking zone is switched off, the set timer function is switched off at the same time.

Choice of burner

	Control Panel	Indication
1.		The control zone flashes.	indicator
2.	Touch the CLOCK touch field 1 time	The control zone flashes	indicator
3.	Touch the CLOCK touch field once	The control zone flashes	indicator
4.	Touch the CLOCK touch field once	The control zone flashes	indicator	fourth

After the flashing of the control indicator slows down, you can set or change the heat setting for the cooking zone.
If other timer functions are also set, the shortest time of all timer functions appears after a few seconds and the corresponding indicator light starts flashing.

Time setting

The time is set.

Disabling the timer function

The control indicator goes out.

The timer function of the selected hotplate is disabled.

Change of time

After a few seconds, the blinking frequency of the control indicator decreases.

The time is set.

The countdown is running.

Display of the remaining cooking time

After a few seconds, the control indicator starts flashing more slowly.

Silencing the beeper

The sound signal stops.

Safety shutdown
cooking zone
If within 10 seconds after switching on the cooking zone, the heat setting for a hotplate is not set, the cooking zone will automatically switch off.
If one or more sensor fields are covered for more than 10 seconds by any objects (pan, cloth, etc.), an audible signal sounds and the hotplate switches off automatically.
If all the cooking zones are switched off, the cooking zone will switch off automatically after about 10 seconds.

Control Panel
If one or more sensor fields overlap for more than 10 seconds, an audible signal sounds. The audible signal is automatically turned off after the touch fields are no longer covered.

Burners
If at least one of the hotplates is not switched off after a certain time or the heat setting is not changed, the corresponding hotplate will automatically switch off.

A note about acrylamide
According to the results of the latest scientific research, intensive heat treatment of food products in order to obtain a ruddy brown crust is dangerous to human health due to the harmful effects of acrylamide. This is especially true for foods that contain starch. Therefore, we recommend that you cook food at the lowest possible temperature and do not brown the food too much.

Cookware
Determine the bottom of the suitable cooking utensils. The bottom should be thick and extremely flat. Cookware covered with steel enamel, as well as cookware with an aluminum or copper bottom, can leave marks that are difficult to remove or completely unremovable on the glass ceramic hob, changing the original color of the hob.

Energy saving

Place cookware on the burner just before turning it on.
If possible, always cover pots with a lid.

To use the residual heat, turn off the burners before the end of cooking.

The dimensions of the bottom of the pan and the burner must be the same.

Examplesapplicationsatcooking

The data in the following table are indicative.

stepWayready— heatingapparitions		Purpose	Duration
		Residual heat, Off position
	Support— zhanieheat	Keep warm prepared hot dishes	according to need	cover the product
	Melted— ing	hollandaise sauce, melting butter, chocolate, gelatin		Stir from time to time
	Thickening	Whipped omelet, egg jelly		Cook under the lid
	Languor	Rice stewing and dairy dishes warming up ready meals		Add water to the rice, increasing its quantity is at least twice. Dairy dishes occasionally stir
	Zapari— ingAdmission	stewing vegetables, Stewing meat		Add to vegetables some water (no more than a few tablespoons)
	Cooking	Steaming potatoes		Use a little amount of liquid e.g. max. 1 l l of water per 750 g potatoes
		Cooking significant volumes of food thick soups and more	up to 3 liters of liquid plus 60-150 min. l dish ingredients
	light frying	Schnitzel, sausages "cordon bleu" cutlet, meatballs, raw fry sausages, liver, flour gravy, eggs, omelette, frying donuts	continuous frying
	Intensi— obviousfrying	Potato fritters, roast cuts, steaks,	5-15 min. on each side	Flip from time to time
	Boiling FryingFritiroing	Boiling large amounts of water, boiling "dumplings", frying meat (goulash, poached roast), frying "french fries"

Washing and care

Carefully! Residual heat from the burners can cause burns.
Attention! Sharp and abrasive cleaning agents will damage the appliance. Wash the appliance with water and a mild detergent.

Attention! Residues of cleaning agents will damage the appliance. Remove them with detergent and water.

Washing the device after each use
1. Wipe the device with a damp cloth and detergent.
2. Wipe the device dry with a clean cloth.

Removal of contaminants
1. Position the cleaning scraper at an angle to the glass ceramic surface.
2. Slide the scraper blade to remove dirt.
3. Wipe the instrument with a damp cloth and detergent.
4. Wipe the instrument dry with a clean cloth.

	delete
Type of pollution	immediately	from a cold device	by using
Sugar, foods containing sugar			scraper for cleaning
Plastic, aluminum foil			pollution*
Traces of lime and water
splashes of fat			cleaners for glass-ceramic surfaces and of stainless steel*
Spots with a metallic sheen that change the original color of the surface

* Scrapers, cleaners for glass-ceramic and stainless steel surfaces are available from specialized stores
Remove particularly stubborn dirt with a glass-ceramic or stainless steel cleaner.
Scratches and dark spots on glass ceramic cannot be removed, but they do not affect the normal operation of the appliance.

What to do, if…

Malfunction	Possible reason	Troubleshooting
Burners do not turn on or do not work	More than 10 seconds have passed since the device was switched on	Switch on the device again.
		Disable Child Lock (See Child Lock section)
	Simultaneous touch on multiple touch fields	Touch only one touch field
	The safety shutdown of the device has been triggered	Remove foreign objects lying on the control panel. Switch on the device again.
	Child lock enabled	Disable Child Lock (See "Locking and Unlocking the Control Panel" section)
An audible signal is triggered when the device is turned off	The control panel is completely or partially covered by some object	Delete item
residual heat indication.	The burner has just been switched on and has not had time to heat up.	If the hotplate is hot, contact the service centre.
automation	There is still residual heat in the burner AND	Let the burner cool down.
	Maximum heating level set GD	The maximum heat level provides the same burner power as the automatic boil.
	The heating level was set by the touch field ^	1. Switch off the hotplate. 1. Program the cooking zone with the touch field &
A beep sounds, the device turns on and turns off again after 5 seconds; after another 5 seconds, another beep sounds.	The touch field "Ein/Aus" (On/Off) is covered by something, such as a cloth.	Do not place any objects on the control panel.
Q indicator lights up	The overheat protection has tripped	Switch off the burner. Turn on again.
The display appears (Yu with a number	Electronic system error	Disconnect for a few minutes appliance from the mains (remove home fuses electrical wiring). If after turning on the device indication B will reappear, contact the service center.
The display shows (S and minus	control panel lighting too strong, e.g. bright sunlight	Briefly cover the control panel, e.g. with your hand. An audible signal sounds and the appliance switches off. (Again) turn on the device

If you are unable to resolve the problem using the above measures, please contact an authorized service center.

Warning! Repairs to the device may only be carried out by specialists. Unqualified repairs can have dangerous consequences for the user of the device.
If you use the services of the service center on the wrong grounds, then a visit to the service center technician may be charged even during the warranty period.

Disposal

Packaging materials
Packaging materials are environmentally friendly and suitable for reuse. Synthetic parts are marked with special markings, for example: >PEPSInstruction for assembly

Safety instructions
Comply with the laws, ordinances, regulations and standards in force in the country in which the appliance is installed. (These include safety requirements, rules and procedures for disposal, etc.).

The device may only be installed by a qualified specialist.

Observe the minimum allowable distances from other appliances and furniture.

A protective tray must be installed under the appliance.

The cut surfaces in the worktop must be protected from moisture with a suitable sealing material.

The seal must connect the appliance to the worktop so that no gaps remain.

Do not install the appliance in close proximity to doors or under windows. Opening a door or opening a window can tip over hot dishes in the heating zone.

WARNING!

Risk of electric shock.

The socket for connecting the mains supply is energized.
De-energize the socket for connecting the mains supply.
Follow the wiring diagram.
Follow the safety rules when handling electrical appliances.
Proper installation of devices connected to the network must reliably protect against contact with conductive parts.
The appliance must be connected to the mains by a qualified electrician.

ATTENTION!
Problems caused by electrical current. Loose and incorrectly installed plug connections can cause the connector to overheat.
Terminal connections must be installed technically correctly.
The power cord must not be taut.
For single- or two-phase connection, use a suitable power cord type H05BB-F Tmax. 90° (or higher).
If the power cord of this appliance is damaged, it must be replaced with a special power cord type H05BB-F Tmax. 90° or higher. It can be purchased at the service center.
During electrical installation, it is necessary to provide a device that allows you to disconnect from the network a device with a contact opening width of at least 3 mm in all poles.
Suitable opening devices for this purpose are, for example, emergency switches, fuses (screw fuses must be removed from the holder), automatic safety switches and contactors.

It is simply indispensable in any kitchen, and the Electrolux EHF 96547 XK electrical appliance (reviews note the stylish and modern design products) especially, because he acts as a real helper in the house. It saves energy, heats up quickly and allows you to cook and reheat any dish.

Electrolux EHF 96547 XK: description

Electrolux EHF96547XK meets all modern quality standards. It has four burners that allow you to cook several dishes at the same time. Two of them - with an additional extension area. One is oval and the other is round. These burners can be used for dishes of non-standard sizes.

Touch panel control. There is a button to turn the device on and off, which works with a single touch of a finger. The child lock function is active. You can completely lock the control panel and, if necessary, unlock it. There is a Stop + go mode, as well as a button to disable and enable the external circuit. During operation of the device, the automatic heating mode is often used.

The panel displays the heating power, which can be set using a special ruler. Indicates which burner is in operation. There is also a countdown timer that allows you to determine the duration of the burner. The OptiHeat Control indicator notifies you how cold the Electrolux EHF 96547 XK panel is.

The surface type of the device is electric. Work zone made from glass ceramic. requires careful attitude and caring care.

Electrolux EHF 96547 XK device: characteristics of technical parameters

As mentioned earlier, the product has four Hi-Light burners. The front left has a nominal heating power of 800/1600/2300 W, which corresponds to the following surface diameters: 120/175/210 mm. The rear left and front right burners have a heating power of up to 1200 W and a diameter of 145 mm. The rear right burner is an elongated oval shape and can have diameters of 170 and 265 mm with powers of 1500 and 2400 W respectively.

Powered by a radiant heater household appliances Electrolux EHF 96547 XK. The characteristics of the product mark the touch control panel, which launches its functions with just one touch of the finger. Available - sound notification, emergency shutdown of the device. There is a self-diagnosis of possible malfunctions. The unit has an automatic switch-on, as well as indicators for power, residual heat and cooking time. Residual heat can be used for cooking, which will significantly reduce energy costs. Power consumption of the device - 7.1 kW. The width of the unit is 59 cm, its depth is 52 cm, its height is 11.8 cm. The width of the niche of the product is 56 cm, and the depth is 49 cm. Weight household appliance- 7.9 kg.

Produced in black with gray stainless steel trim Electrolux EHF 96547 XK. The country of origin of this product is Germany. This product is warranted for one year.

Installing the instrument

Before installing the Electrolux EHF 96547 XK panel (reviews indicate that the product fully performs all the functions declared by the manufacturer), you should rewrite all the technical specifications that are on the bottom of the device. Then the device is mounted in kitchen furniture specially designed for built-in hobs. Household appliances are produced together with a power cord.

The electric hob must be located at a distance of 50 cm from wall cabinets and at the same distance from walls and other surfaces. A protective floor is installed under it. For more details on the installation of the device, see the instruction manual for Electrolux EHF 96547 XK. Connection to the mains is made only after the complete installation of the panel.

Do not connect the device to and into an extension cord. When connecting, the wire must be fixed, and the plug must fit snugly into the outlet.

About using the product

The built-in hob (electric) turns on with one press on the power indicator. The control program includes an automatic shutdown function that turns off the instrument if:

• all up to one burner is completely switched off;
• power is not set after turning on the device;
• the control panel is filled with some kind of liquid or on the condition that there is a foreign object on it for more than 10 minutes;
• The hotplate is not switched off and the heating power remains unchanged.

Before turning off the appliance, the hob emits a characteristic sound signal.

If the heating power is set to 1-3, the device will turn off after six hours. With a setting of 4-7, the device will automatically stop working after five hours. At 8 to 9, the panel will turn off after 4 hours. If the heating power is at 10-14, then the device stops working after 1.5 hours.

To turn on the power, you need to click on the required mark on the panel ruler. You can set the power by swiping your finger along the ruler to the desired parameter. If the hotplate is not working, then O is displayed on the control panel. When the hotplate is running, a power indicator appears from 1 to 14. A half-zero means that the Stop + go function is running. If the letter E plus some number is displayed on the panel, this indicates a possible malfunction of the device.

The two burners on the hob have several operating circuits that can be turned on and off with the corresponding buttons. This function allows you to use cookware of different sizes for cooking.

When cooking, you can use the "Automatic heating" function (indicator A). This mode heats up the hotplate faster. First, it heats it up to maximum power, and then lowers the temperature to the required one.

The Stop + go function switches all cooking zones to a lower heat setting. When turned on, the power level cannot be adjusted. This mode does not affect the operation of the timer in Electrolux EHF 96547 XK.

The instruction notes that during operation of the device, you can completely block the control panel, use the child protection mode, which prevents accidental activation of the product. Its inclusion is indicated by a burning letter L on the control panel.

The OffSound Control button indicates the residual heat level. Three sticks indicate that the hob is on and cooking is in progress, two indicate keep warm, and one indicates residual heat.

Appliance Care

Electric hob Electrolux EHF 96547 XK needs careful and attentive care. Its surface should be washed after each cooking. Before putting the dishes on the hob, you should make sure that its bottom is clean. Scratches and dark spots do not affect the operation of the cooking equipment. To clean the surface from dirt, use a special agent for hobs and a glass scraper.

If hot plastic, products containing sugar or a plastic bag come into contact with the appliance, they must be removed immediately. To do this, tilt the scraper at an acute angle (45°) and thus gradually clean the panel. All other contaminants are removed after the Electrolux EHF 96547 XK has completely cooled down. The control panel requires the same careful maintenance as all other parts of the appliance.

Energy saving

The hob Electrolux EHF 96547 XK will significantly help save energy when cooking. The instruction manual for this purpose recommends using the following tips:

• Place the cookware before the hotplate is switched on.
• The dimensions of the bottom of the container and the burner must be identical.
• A small container should be placed on the appropriate burners.
• The dishes must be placed on the central part of the burner.
• If water is heated, then it needs to be poured a little more than required.
• When cooking, it is recommended to cover the pan with a lid.
• Residual heat can be used to melt food and keep food warm.

The built-in hob (electric) requires special treatment. So, for cooking on it, you should choose containers with a thick and flat bottom. If the container is made of aluminum, copper or enameled, this may affect the discoloration of the hob.

To save money, use the ÖkoTimer function, which switches off the cooking zone shortly before the countdown timer sounds.

• Heating power up to one in Stop + go mode. Helps keep food warm.
• From one to three. In this mode, dishes can be cooked from 5 to 40 minutes. This is hollandaise sauce, melting food, thickening eggs, scrambled eggs.
• Three to five. Prepare rice and milk dishes. You can reheat cooked food. Working process time - 25-50 minutes.
• From five to seven. Cooking vegetables, fish and meat dishes for a couple. The whole process takes 20 to 45 minutes.
• Seven to nine. Steam potatoes are being prepared. Cooking time - from 20 to 60 minutes.
• Nine to twelve. Light frying food. Cooking pancakes, donuts, eggs.
• Twelve to thirteen. Strong frying of meat and fish dishes. Their cooking time is 5-15 minutes.
• Mode fourteen. Boiling water. Boiling cereals. Cooking roasts and goulash. Deep frying.

The hob is easy to operate. To cook on it, you do not need special skills, it is enough to carefully study the instructions in detail.

Safety

Read the instruction manual before installing and using the equipment. Please note that improper installation of the instrument can cause injury and damage. With a lack of skills in installing built-in hobs, it is better to entrust this work to professionals.

Children should not be allowed to play with the product and packaging materials From him. Do not allow children or pets near the operating appliance or when the panel has not cooled down enough. It should be remembered that during operation, all parts of household appliances are very hot. The child lock must be used at all times. Children under the age of three should not be allowed near the panel, especially if adults cannot provide adequate supervision.

It is forbidden to start the machine from an external timer. Do not leave food that is cooked in oil or fat on the surface of the panel, as this may cause a fire. When frying in oil, the dishes should be covered with a lid. In the event of a fire, the appliance must be unplugged immediately and covered with a blanket.

Items must not be placed on the hob. This also applies to metal products: knives, spoons, forks, lids, etc. It is forbidden to clean the device with a steam cleaner.

If cracks have formed on the glass-ceramic surface or it has begun to crack, then you cannot use such a device, but you should disconnect it from electricity so that it does not shock. If the power cord is damaged, it must be replaced at the nearest service center.

The device must only be installed qualified specialist. Do not install a damaged device. When installing the product, follow the operating instructions.

All necessary clearances between furniture and electrical appliances must be maintained. The cut surfaces of the countertop into which the panel will be mounted must be lubricated with sealant in order to prevent the wood from swelling under the influence of moisture.

Equipment must be protected from moisture and steam. It is not installed near doors and windows. Otherwise, the cookware may fall off the panel when the door or window is opened. If the built-in panel is located above the drawers that are pulled out, then there must be sufficient space between them for air ventilation.

The bottom of the hob becomes very hot during operation, so a fireproof gasket must be placed under the appliance to prevent penetration into the appliance from below. The product must be connected to the mains by an electrician. The hob must be grounded. Care and cleaning of the device should be carried out only when the panel is unplugged from the socket.

Before putting the product into operation, you should make sure that the parameters of the device correspond to the parameters of the electrical network in the apartment. Before using the device, make sure that it is installed correctly. A loose cord or loose plug can cause the contacts to overheat. Do not use the power cord from another appliance for the built-in hob. It is necessary to ensure that the electrical wires are not tangled with each other, and the cord is not too tight. If the outlet is near the panel, then you should make sure that the cord does not swing. It should not touch the appliance and hot dishes, as it may melt when in contact with them. It is forbidden to use extension cords and tees when connecting the panel.

Remove all packaging, protective film and stickers before first use. The appliance is intended for residential use only. When installing it, do not block the ventilation holes.

Do not leave the device unattended and do not touch it with wet hands. Do not touch the device if it has been exposed to water. First, it must be disconnected from the electrical network.

Price

It has a very reasonable cost for equipment of this level Electrolux EHF 96547 XK. The price of the device ranges from 14.5 to 20 thousand rubles. The lowest cost of the product is noted in the retail outlets Tekhnostudii, Megabit, Eldorado, Technosila, OGO.

Distinctive features any devices (like) manufactured by the Swedish company Electrolux are reliability during operation, perfect design and affordable cost. All of this applies equally to the household appliances like an Electrolux cooktop.

And such a device as a combined hob Electrolux combines both gas and electric burners. This option is in demand by those consumers whose areas of residence are experiencing interruptions in the supply of electricity and gas.

Burners may have different size, shape and quantity (from 2 to 5), which include one or more burners that provide ultra-fast heating like .

2 Popular models, prices

Each version of the hob is good in its own way, but Electrolux glass-ceramic hobs are considered to be the "high fashion" today. Elegant appearance, high functionality, easy maintenance, affordable price elevate these panels to the peak of popularity.

Popular models are represented by the following options:

• Electrolux EHH 16340 FK
• Electrolux EHF 6547 FOK
• Electrolux EGG 6343 NOW
• Electrolux EGT 6342 NOX
• Electrolux EGT 7353 YOK
• Electrolux EHF 16240 XK
• Electrolux EHG 6435 X
• Electrolux EHH 3920
• Electrolux EHI 6740 FOK etc.

As for the price of the Electrolux hob, it varies between 250 - 1,100 dollars. But it will cost 30-40 USD.

2.1 Video about hobs

If you decide to buy an Electrolux hob, you should know that the size of the cookware matters when using gas and glass-ceramic hobs. In order for the heating to be uniform and the food to be cooked to be of high quality, the pots and pans must match the size of the heating zone. An example of this is the principle of operation.

Thus, you will be able to save energy, which will not be wasted, but will be directed exclusively to heating the bottom of the dishes.

If you choose an Electrolux independent induction hob, then you can not worry about the safety of your household. The induction hob heats only the bottom of the cookware, while the surface itself remains relatively cool.

The risk of getting burned here is completely excluded, which is especially important for families with small children.

Olga 2377

I have been using the Electrolux REX electric hob, model KT6421XE, for about a year. In my almost white kitchen, a black glass-ceramic hob with a stainless steel-colored frame looks very stylish and advantageous. In addition, this frame protects against overflowing liquid, the countertop is always clean.

4 HiLight burners, three are round, the lower left has three heating zones, and the upper right has a circle + oval. We chose it specifically with such an extension, since we often use the ducklings. Unfortunately, there is not enough power to use all 4 burners at the same time. And even three, if everyone works at the maximum, but this happens quite rarely, so I manage to cook and fry everything.

The touch control panel is quite comfortable. Commands are confirmed by beeps and the information is shown on the display. The scale is from 0 to 14, but you can only cook at 12-14, the rest is for heating food.

By trial and error, I still adapted and made friends with our Rex. In general, I am satisfied with the panel and its functions, however, I do not cook much and exquisitely. An excellent “automatic heating” function, it really saves time, the surface itself sets the maximum heating level for a particular burner, and when the water boils, it automatically switches the heating temperature to a pre-selected figure.

From the function "countdown timer" I'm generally delighted. The timer can be set simultaneously for all four cooking zones. After selecting the desired burner, set the minutes and select the desired power. After the set time has elapsed and an audible signal sounds, the hotplate switches off automatically. That is, knowing the exact proportions, you can cook a simple dish without standing next to the stove. For example, I leave a Turk with coffee for two cups in the morning for 6 minutes at the 14 mark, and I can get ready without worrying that the coffee will run away or boil away. Or I set 25 minutes at the mark of 10, and cook buckwheat porridge, walking with the child on the street. There is also a countdown from the start of cooking. This timer is designed to control the time of the burner, but I personally have never used it.

Prices in online stores:

		entero.ru	1 790 R
		entero.ru	7 220 R

Prices in online stores:

Best Kitchen

8 607 Р

Quite convenient is the function of automatically turning off the hob if liquid is spilled on it or something is on the panel for more than 10 seconds (pot or potholder). Before the stove turns off, a warning beep will sound for a few seconds, so there is time to remove the object if it was accidentally placed there.

I use the lock feature all the time. This function allows you to lock the control panel, which prevents accidental switching off or changing the heating power. When work is completed and the hob is switched off, this function is deactivated automatically.

I have never used the STOP+GO function. I don't quite understand what it is intended for. When this function is activated, all active cooking zones go to minimum. In this case, the heating power can no longer be changed, but the "Timer" function remains active. When the STOP+GO function is deactivated, the previously operating cooking zones automatically return to the pre-heating power. What this gives me is not clear, since the residual heat at the burners is quite strong, and the dish can “reach” even when the stove is off.

But the function "Protection from children" was simply necessary for me. This function prevents accidental switching on and use of the hob, and in a house where two inquisitive kids, a lot of accidents happen. If this function is canceled for one cooking cycle and after turning off the stove, the "protection" will turn on again. Very comfortably!

Manufacturers recommend cleaning hob after each cooking, but I can’t do it. Therefore, small dark spots and scratches appeared on the glass-ceramic, but they do not affect the quality of the surface.

Prices in online stores:

		entero.ru	2 990 R