Pump station aquajet 92

Pumping station for water supply systems, buy in Moscow and Moscow region, delivery across Russia

RUB 12 792.00

Delivery

1. Delivery in Moscow and the Moscow region is carried out within 1-2 days from the date of order, by courier or company vehicles. Delivery cost depends on the destination and urgency, and is specified with the manager. If delivery matches the planned schedule, delivery is free.
2. Delivery to the regions of Russia is carried out by carrier companies (Business Lines, Autotrading or any other company at the request of the customer). Delivery cost in accordance with the carrier's tariffs, delivery to the terminal in Moscow is free.

The DAB AQUAJET 92 M pumping station is designed for organizing water supply systems for private households, small cottages and summer cottages; it can be used in industry to increase pressure, feed boilers and technological lines.

Productivity (for the entire line) - from 0.4 to 5.4 cubic meters / h, head - up to 62 m of water column. Maximum working pressure: for AquaJet 6 bar, for AquaJet-Inox 8 bar.

The pumped-over liquid: clean, without solid inclusions and mineral oils, non-viscous, chemically neutral, similar in characteristics to water.

Temperature: for sanitary water - from 0 ° С to + 35 ° С, for other applications - from 0 ° С to + 40 ° С. Basic materials. Hydraulic body - cast iron for AquaJet models, stainless steel for AquaJetInox models; engine support - aluminum alloy, impeller and diffuser - technopolymer; rotor - stainless steel, seal - EPDM; mechanical shaft seal - graphite / ceramic; accumulator capacity - 20 liters. Features. The motors are equipped with an electromechanical control system with a built-in pressure sensor. There is built-in overload protection. Installation. The motor shaft is in a horizontal position. Standard power supply: 1 × 230 V. Degree of protection: motor - IP 44, terminal box - IP 55. Insulation class: F.

Related products

vendor code	Name	Price
	102690000		RUB 16,735
	60141884H		RUB 15 056
	60141885H	Pump station DAB AQUAJET-INOX 102 M-G

Courier delivery is possible: in Moscow, in St. Petersburg

DAB AQUAJET pump station 92 m

DAB AQUAJET pump station. The pump is a ready-to-use unit assembled on the basis of a self-priming JET pump with a cast iron casing. The kit includes a JET pump, a diaphragm tank with a volume of twenty liters, a pressure switch, a pressure gauge, a hose for fastening the pump to a tank, an adapter fitting.

The device can be used to increase the water pressure in plumbing systems, to lift liquid from wells and various reservoirs, as well as on the farm (when irrigating, for example). The pump hydraulic tank is supported for a stable position on the floor. The peculiarity of the use of pumping stations is that with the constant analysis of water, the pressure in the system decreases, which can be controlled by the device's pressure gauge. As soon as the head reaches the switch-on value (1.5-1.6 atmospheres), the pump starts to work, since the relay contacts are connected. The pump continues to work even after disconnecting all consumption points, until the tank is completely filled with liquid at a pressure of two and a half to three atmospheres. The pump will stop running immediately after the relay contacts are disconnected. It is required that the regulation of the pressure switch is carried out only by professionals.

Specifications pump station AQUAJET 92 M

• Maximum head, (m) 47
• Throughput, (cubic meters / hour) 3.6
• Mains voltage 220/230 V
• Rated power, (W) 750
• Power consumption, (W) 940
• Pump type surface pumping station
• Water quality is clean
• Body material cast iron
• Centrifugal pump mechanism
• Connection connector diameter 1 "
• Power cord length, (m) 10
• Permissible ambient temperature, (g. C) from 0 g. From up to +40 gr. FROM
• Permissible fluid temperature, (g. C) from 0 g. From up to +35 gr. FROM
• Hydraulic tank volume, (l) 20
• Maximum suction lift, (m) 8
• Installation of the pump horizontal
• Automatic control of the water level is
• Smooth engine start is
• Built-in ejector, technopolymer
• Dimensions (WxHxL), mm 305x509x543
• 2 year warranty
• Special features Maximum working pressure: 6 bar (inlet pressure + maximum pump pressure must never exceed maximum working pressure!).

Buy Dab AQUAJET 92 M- means to purchase at a low price one of the most popular models of domestic automatic pumping stations with a Varem tank. Reliable, with a high quality cast iron JET pump, capable of pumping water even with air bubbles and sand! It enjoys the well-deserved trust of summer residents and owners country houses because of its excellent technical characteristics, reasonable price and true Italian quality. While the owners of cheap Chinese counterparts are busy with endless replacements of rusted tanks, jammed pumps, and often the pumping station as a whole, the owners of Dub Aquajet have no problems using modern technical solutions of Italian engineers.

The domestic pumping station Dab AQUAJET 92 M is assembled at the factory, completely ready for operation and consists of:

• self-priming centrifugal pump JET, complete with a power cable with a plug,
• membrane tank Varem,
• pressure automat,
• pressure gauge,
• fittings for connecting the pump and the tank.

Technical characteristics of the automatic pumping station DAB AQUAJET 92 M

Reference: 102650080H
Manufacturer: Dab Pumps, Italy
Maximum productivity, liters / min: 80
Accumulator type: Varem
Tank volume, liters: 20
Design features of the tank: horizontal, with a butyl diaphragm, completed with plastic supports in the lower part and a bracket for mounting the pump
Maximum power consumption, kW: 0.94
Rated power consumption, kW: 0.75
Capacitor, microfarad: 14
Rated current, A: 4.2
Mains voltage: 220-240V / 50 Hz
Maximum head, meters: 37
Suction depth, meters: 9
Maximum temperature of the pumped-over liquid, ° С: 35
Maximum ambient temperature, ° С: 40
Maximum working pressure: 8 bar (800 kPa)
Connection, inch: 1
Motor protection class: IP 44
Terminal box protection class: IP 55
Insulation class: F
Water quality: clean, air bubbles and some sand allowed
Installed pump: Dab JET
Impeller, diffuser, venturi and sand protection: technopolymer
Asynchronous motor, enclosed, air-cooled: fan impeller on motor shaft
The ball bearings of the motor shaft are selected with an increased margin of safety, do not require lubrication throughout the entire service life and provide a low noise level.
Pump body material: cast iron
Pump installation: horizontal
Weight, kg: 19.2
Warranty: 2 years

You can pick up the purchased goods yourself or use the delivery service in Moscow and the Moscow region. Having made an order today, tomorrow you will receive it at your disposal. If necessary, you can use the prompt delivery service and receive products today.

Delivery to the entrance (check with the manager about the possibility of lifting to the floor)

Delivery is made daily from 9 am to 9 pm including weekends and holidays.

Goods worth up to 6,000 rubles can be picked up by yourself.

Pickup points

For orders over 6,000 rubles:

• Within the Moscow Ring Road - from 0 to 500 rubles, (individual delivery cost is indicated in the product card)
• Outside the MKAD up to 10 km - 700 rubles,
• Outside the MKAD more than 10 km - 700 rubles + 30 rubles for each kilometer.
• In the regions, delivery by a Transport company (calculated individually).

Shipping cost per

km from MKAD

RUB 700

Unloading of bulky goods is carried out by the forces and means of the customer.

The money is transferred directly to the courier upon receipt of the goods. This method is the most popular among buyers due to its simplicity and ease of calculation.

Payment by credit card to the courier upon receipt

Couriers have a portable banking terminal available, which allows Teplovod-Service customers to pay for goods with bank plastic cards (check with the manager about the possibility of paying with a bank card).

Payment by credit card on the website

To select payment using a bank card on the "Cart" page, you must select the item "Payment by bank card on the site".

Payment is made through PJSC SBERBANK using Bank cards of the following payment systems:

After clicking on the "ONLINE PAYMENT" button, you will be redirected to the payment gateway of Sberbank of Russia to enter your card details.

Please prepare your plastic card in advance. Additionally, you need to enter your full name, email, contact phone number, as well as the reservation number to identify the payer. The connection with the payment gateway and the transfer of information is carried out in a secure mode using the SSL encryption protocol.

If your bank supports the technology of secure online payments Verified By Visa or MasterCard Secure Code, you may also need to enter a special password to make a payment. You can check the methods and possibility of obtaining passwords for making online payments at the bank that issued the card.

This site supports 256-bit encryption. The confidentiality of the reported personal information is ensured by Sberbank of Russia. The entered information will not be provided to third parties, except as provided by the legislation of the Russian Federation. Bank card payments are carried out in strict accordance with the requirements of Visa Int. and MasterCard Europe Sprl.

No interest is charged when paying by credit card.

Payment is a transfer of funds from the buyer's current account to the seller's account, we work on a common taxation system with VAT. Delivery of goods is carried out after receipt of funds to the account of the company Teplovod-Service LLC. This method is used in the calculations by legal entities.

Our details

Limited Liability Company "Teplovod-Service"

OGRN: 1105003006162

INN: 5003088884

Checkpoint: 500301001

BIK: 044525225

Bank: PJSC "Sberbank of Russia"

R / s: 40702810838060011732

K / s: 30101810400000000225

Yur. the address: 142718, Moscow region, Leninsky district, Bulatnikovskoe rural settlement, Varshavskoe highway, 21 km., Office B-6

Special conditions

For goods with the status "On order" worth up to 100,000 rubles. no prepayment required.

For goods with the "On order" status over 100,000 rubles. an advance payment of 30% is required.

• Any item shipped by the shipping company requires 100% payment.

Automatic pumping station DAB AQUAJET 92 M-G is designed for water supply of small country houses and summer cottages. Consists of a diaphragm tank, pressure switch for automatic operation, pressure gauge and electric pump. The pump is supplied with a power cable with a plug. The unit is assembled at the factory and is ready for operation. The pumping station is designed to pump liquids without solids and mineral oils, not viscous.

GWS hydraulic tank with additional 5 year warranty... Supplied with supports at the bottom and brackets at the top for mounting the pump. It is necessary to protect against water hammer and is a protection against frequent pump starts.

Automation DAB AQUAJET 92 M-G

The pumping station is equipped with the simplest automation system. The pump is turned on by a drop in pressure, and it is turned off when the set pressure is reached. The switch-on and switch-off pressure is adjusted on the pressure switch.

Features of installation of the pumping station DAB

The pump must always be installed on a support base so that the inlet is horizontal and the discharge is vertical. The pump must only be installed in a horizontal position.

The pump is not equipped with built-in dry-running protection, therefore it is recommended to purchase it separately.

Materials:

• Hydraulic body - cast iron
• Engine support - aluminum alloy
• Impeller and diffuser - technopolymer
• Rotor - stainless steel
• Sealing - EPDM
• Mechanical shaft seal - carbon / ceramic.

Information on technical characteristics, delivery set, country of manufacture and appearance product is for reference only and is based on the latest information available at the time of publication

Characteristics

? The period during which the manufacturer provides a warranty for the product Manufacturer's warranty	1 year
Max. consumption, m³ / hour	4.8
Max. head, m	36.2
Maximum pressure	6 bar
Pumped liquid temperature	0-35 ° C
Connection size	1"
Body material	Cast iron
Max. suction lift, m	8
Hydraulic tank volume, l	20
Impeller material	Technopolymer
Protection class	IP 44; IP 55
Insulation class	F
Power consumption	0.94 kW
Voltage	220-240 V
Weight, kg	19.2
Height, mm	510
Width, mm	566
Depth mm	360

Ask a Question

You can ask any question you are interested in about the product or the work of the store.

Our qualified specialists will definitely help you.

Shipping and payment

Payment options

Cash upon receipt

Cash payment is possible upon receipt of the order at the point of issue, in our office or upon delivery by courier service. Please note that some pick-up points do not accept cash payment, the manager will specify the payment option when confirming the order. If the order amount is more than 30 thousand rubles, an advance payment may be required.

By bank card on the website

If you want to pay for your order online, you need to select the payment method "Card on the site" when placing the order. After confirming the availability and cost of delivery, a letter will be sent to the mail you specified with a link to your personal account. To pay for the order, you need to click on the "Pay" button in your personal account, then you will be redirected to the bank's secure payment page *.

By bank card upon receipt

Payment by credit card is possible upon receipt of the goods in our office and at the points of issue of our partners. Please note that some points of issue do not accept payment by cards, the manager will specify the possibility of payment when confirming the order.

Cashless payments for individuals persons

When placing an order, you must select the payment method "Payment by invoice". After confirmation of the order by the manager, an invoice for payment will be sent to your mail, which you can pay at any bank that accepts payments from individuals or through online banking.

Cashless payments for legal entities persons

To receive an invoice for payment, you need to place an order as a legal entity. person and indicate all the data required for invoicing (TIN, KPP, company name). After confirming the availability of the goods, you will be issued an invoice valid for 3 days.

Loan for up to 24 months or 6 months without overpayment

An opportunity for Sberbank's clients to issue consumer credit to buy without leaving home. Loan approval through Srebank Online. There are 2 credit options:

• Loan for a term from 3 to 24 months... The total cost of the loan depends on the loan term and the value of the goods.
• For goods marked with the "Credit without overpayment" sticker, you can apply for loan for 6 months with a discount from our company... The discount is calculated in such a way that, in the end, with interest, you pay the full cost of the goods without overpaying the interest on the loan.

Conditions for applying for a loan:

• Russian citizenship
• Debit card holder of PJSC Sberbank
• Age 21 to 65
• Registration on the territory of the Russian Federation
• Loan amount from 3,000 to 300,000 rubles.