How to weave baubles from tubes. Weaving from tubes: bracelets, baubles with a square section, and other do-it-yourself wicker accessories. Souvenir handle made of straws

How to weave from tubes?

Many girls have tried to weave a bracelet for themselves at least once in their lives. But few people know how to weave a bauble from tubes. But in this form it will look much more original and interesting, and it is created quite quickly.

Simple weaving

For a successful first experience, try to weave a bauble using a very simple pattern. To work, you need 4 special plastic tubes about 2.5 m long.

1. We connect all four ends of the tubes with a knot. We form loops of the two outermost ones: for this we make a semicircle from each. We insert each edge of both tubes into the opposite loop. The two tubes in the middle remain unchanged. We tighten the loops.
2. We continue to weave a bauble from tubes to the desired length. The most important thing is to form the nodes correctly. They should be tight, but not overtightened. Such a bauble will look airy and neat. In order for the bracelet to wrap nicely on the wrist, we twist it several times before putting it on.

Fenichka with beads

If you have small beads with a large hole, you can make a very sophisticated bracelet. To do this, you will need:

• tubules;
• beads;
• golden metal ring.

Progress:

Such bracelets can be worn by oneself or presented to a friend as a sign of friendship. According to the beliefs of the Indians, in this case it will be very strong.

Elizaveta Rumyantseva

Nothing is impossible for diligence and art.

Content

A bauble or bracelet is an adornment made of various materials: leather, threads, beads and simple cords. Someone considers them a decor, others prefer to call them a symbol of friendship. How to weave baubles if you've never done it? You just need to decide on the type and materials used and follow our recommendations step by step. We will analyze all possible options so that you do not have any questions.

Weave in the form of a pigtail

Try a four-rope pigtail first:

• In this case, two central threads are taken: the left one is superimposed on the right side, and the right one on the left. As a result, the two extreme threads are in the center.
• We continue weaving to the desired length.

In a similar way, a bauble is woven from an even number of ropes. When using an odd number, the extreme ones alternately cross in the center, as in the case of three. With a little practice, the pigtail forms especially quickly.

There are also more complex ways, when the extreme threads are intertwined around one central one.

Oblique weaving

Once you understand the basic principles of knot formation, you will quickly figure out all the techniques. First of all, oblique weaving is used. To do this, the rows are performed either from left to right or from right to left. The designations on the diagrams indicate which node should be in a given location. The beads are strung on the fishing line in accordance with the color indicated in the diagram.

If you wish, you can make a pattern in the form of arrows or a zigzag. We will talk about them below.

Bicolor

In most cases, such decorations are woven using ribbons or cords. The ribbons should be narrow, but you can experiment if you want. A bauble made of leather cords in two contrasting colors looks spectacular.

There is nothing complicated in this technique. Watch the video tutorial and follow the instructions of the wizard. In a couple of knots, you will understand the principle, and the work will go much faster.

Multicolored

Try to weave not only two-tone bracelets, but also multi-colored ones - you just need to change the pattern.

• To do this, draw dots on paper and paint over them with a specific color.
• Measure your wrist - this will be the length of the product.
• The width depends on your imagination.

If using tape, use 2-3-4 colors. But especially spectacular bracelets are made from beads. Take absolutely any pattern as a basis, and each decoration will be unique.

Try a simple diagram first. Use. You need to start with a strip of beads strung on a fishing line. Then work according to the scheme.

Once the length is sufficient, make a clasp. Use a hook or special locks. If desired, weave a long bracelet and don it without undoing. Remember to solder the ends of the line to prevent the braided fabric from unraveling.

With names

Jewelry with names will look especially attractive. They are presented as a gift or symbol of friendship. To create a pattern, you will need several colors, but even with two material colors, you get a beautiful commemorative bracelet.

In addition to beads, prepare a lighter or matches, fishing line, scissors, pliers (if you have a clasp). Start weaving according to the classic pattern above. Use a stencil to create the letters. To make it convenient, draw a diagram on paper and knit along it.

Bracelets can be wide, and then not only the name will fit on them, but also other words and signs that are important to you.

Personalized products are not necessarily beaded. Check out the video tutorial, which details how to create letters from threads.

Main nodes

For the convenience of knitting, remember the main knots. To do this, use our master class.

You will need:

• spool of thread or skein
• clip or pin
• pillow
• tailor's meter

• Prepare pieces 40-50 centimeters long. Connect them and tie them in a knot. Insert a pin into it.
• Next, you need to fix the pin on the pillow with a needle. Lay out the threads one by one or in the sequence you need, according to the pattern.

• We braid the working knot, creating a loop. You need to stretch the same worker into it and tighten it.
• Repeat the process and you will have a double knot. Next, you need to swap the threads. The loops should be consistent and tight.
• As a result, the first thread became the second. We use it as a knot, and the third as a working one. We continue until the first becomes the last.
• Once you have a ring of the desired length, finish off with a regular pigtail and secure the two ends with knots.
• You can cut off the excess ends.

With rhinestones and stones

This workshop will help you create a rhinestone bauble. For beginners, we recommend a simple option.

• Take a needle, nylon threads and rhinestones.
• Start at the lock and sew in the middle or along the edges with stitches, stringing rhinestones, beads or beads on the front side.

The thorn is fixed in a similar way if it has screws.

• With the help of an awl, the element is tightly pierced and fixed.

Tip: note that the threads should not be broken, but moved apart with an awl so that the product does not unravel.

If skill allows, add rhinestones.

• In the process of work, simply weave the elements into the canvas, and knit using any chosen method that you have already mastered.
• Make sure that the position of the rhinestones is the same, and then the bracelet will turn out to be perfectly symmetrical.

With chain

If you already have a bauble or even a bookmark for a book, using this technique you will update it by adding a chain. Agree, this decor looks good in the photo.

For work, take a floss, a needle, and scissors.

• We take the threads and insert them into the needle. First, baubles need to tie a knot.
• Over the edge, we begin to sew our chain tightly.
• Please note that the stitches should be the same length as the distance between the chain links.
• We continue to work until the end of the bracelet.
• It remains only to cut off the excess and enjoy the new decoration.

From satin ribbons

In this workshop, you will learn how to weave baubles from ribbons. Follow these steps in sequence:

• Take two ribbons and tie them together.
• Line one end in a loop or loop.
• We also fold the next end in the form of a loop and thread it into the previous turn.
• We tighten the loop of the first tape.
• We make the next turn and insert the previous one into it, also tightening it.
• We continue until the desired length is reached.

Use ribbons of different colors to be attractive, and then you will have a cute strap.

From thread floss

Floss products are very diverse. It will not be easy for beginners to understand the technique, but by trying a couple of knots on simple threads, you will master this technique. It is only required to follow the weaving pattern.

Except for floss, where cotton and nylon are used. It is more slippery and a little easier for beginners to weave. But the knots require a stronger binding, because if they are careless they unravel.

• Pick the colors you want. To create unique jewelry, you need a set of floss.
• Secure the desired amount of threads with a clip and a paper clip.
• Follow the instructions for the video tutorial.

Macrame style

The nodes used in macrame will help to create a special pattern. Already from the photographs it is clear that these are openwork products that simply cannot be created using floss or ribbons.

They are woven from nylon threads. You will need them 5. Use a ruler to measure 2 pieces of 80 centimeters, 2 pieces of 55 centimeters and one piece no more than 25 centimeters long. You will also need a ring.

• Secure the medium lengths to the ring. To do this, fold them in half and insert them into the ring, creating a loop. You need to thread the ends into it and tighten it. Such a mount will be reliable and immovable.
• Next, a piece of 80 centimeters long is taken and folded in half.
• We put it under the two central ones.
• We will weave using the long ends.

To get started, practice on simple nodes as follows:

With an image

For experienced craftswomen, we recommend trying the patterned technique. She practically does not despair of the above-described: it can be knots of threads or patterns of beads. The picture needs to be converted into a diagram with a picture, phrase or logo.

• Create the desired length product.
• Then use the clasp of your choice. For narrow baubles, hooks are suitable, for wide ones you will need to purchase a clasp.
• Sometimes it is necessary to make additional holes in it, which must be drilled with a thin drill.
• If this is too complicated a process, sew on a button and make a buttonhole at the other end.

With nuts

Even more unusual items are used when creating jewelry: nuts.

• Look again at the description of the pigtail technique.
• When creating weaves, simply thread the thread through the hole in the nut and continue working.
• Decide for yourself where the nuts will be located: on both sides of the bracelet or only on one.

How to make a friendship necklace

Baubles are a symbol of friendship. Why not create a necklace in the same way? You can use any of the following techniques. To make a necklace of threads, floss, beads, with nuts and chains - it all depends on your desire!

What the baubles "talk about"

Baubles are not only a symbol of friendship and affection. They cannot be sold, only gifted. It is generally accepted that they fulfill a wish: you need to make it when weaving the third knot, and it will certainly come true.

It is believed that the presence of two identical baubles in people indicates their sympathy for each other. The owners of white bracelets strive for freedom, and red ones for love. While tying them on your hand, make a wish, after a while it will come true.

If the bauble is untied or torn, perhaps your friendship with the person who gave it will soon come to an end.

Found a mistake in the text? Select it, press Ctrl + Enter and we'll fix it!

Discuss

How to weave baubles for beginners

Woven bracelets, or, as they are also called, baubles have long been considered a symbol of friendship. Most often they are woven to give to your friend or girlfriend. Weaving baubles is not difficult, but it takes quite a long time. The material for weaving can be floss threads, multi-colored rubber bands, paper or plastic tubes. Today we will talk about weaving bracelets quickly and easily from colored tubes.

The straws are a very obedient material, unlike the same threads, so it is perfect for beginner bauble makers. The place of work should be comfortable and well lit. In addition to the material, you will need a machine for weaving to fix the ends of the tubes. However, this is not necessary - the machine can be easily replaced with adhesive tape, which securely holds the tubes on the table.

Studying braiding bracelets from colored tubes

Pigtail- the simplest and most well-known method of weaving, often used in the manufacture of baubles. The braid is often braided from three tubes, but you can take more. In this case, all the tubes are divided into three groups. There are more interesting ways to weave braids.

Aiguillette cord.

Following this pattern, you can weave a bracelet from any odd number of tubes: five, seven, nine, and so on. The essence of weaving is that first the left tube is taken and placed in the center, and then the right one moves there, and so on until the very end of the length of the tubes.

Even weaving.

The pigtail is woven not only from an odd, but also from an even number of tubes. You can take six, and eight, and ten weaving tubes. The more you take, the, accordingly, the wider the finished bracelet will turn out.

Each weaving step consists in moving one of the central tubes from left to right, and the other from right to left. Repeat these steps as many times as necessary to complete the bauble.

Oblique weaving.

This weaving method is very popular with bauble lovers. With its use, you can weave baubles with various patterns, inscriptions and drawings. There are many ready-made oblique weaving patterns, but you can create your own using a special generator, or by inventing it yourself.

There are four types of knots used in oblique weaving. Each of them has its own, special designation. To figure out how to weave baubles with oblique weaving, consider the diagram in the photo below.

Judging by the diagram, you need eight tubes, four gray and four purple. You can take two long tubes of two colors and fold them in half - you get just what you need. Tie the tubes in a knot, leaving a small loop on top, and tape to the table.

Oblique weaving is carried out in rows. The numbers in the diagram indicate the row number. The direction of weaving can be any, there is no significant difference. For example, let's take the direction from left to right, which means that you should start from the top left knot.

The arrows on the circles of the diagram indicate the type of knot, and their bases indicate which tube is used for weaving. After tying the knot, the end of the tube will move to the side indicated by the arrow. Each knot is made up of two small knots.

Trying to make a curved left arrow and vice versa

This is how the weaving of the first knot begins: bend the black tube over the purple one in the form of a four, and then pass it inside the loop. Tighten the knot by pulling the tube up.

The second half of the nodule begins with the bend of the black tube in the opposite direction. You should repeat the same thing that was in the first part, but in a mirror image. The black tube will be on the left and the purple tube on the right. Tighten the tubing to tighten the knots.

Right and left arrows.

Now it's the turn of the second bundle. It is indicated by an arrow with a slope to the right and, just like the previous one, consists of two small nodes. Since the base on the diagram is marked in black, you need to weave with a black tube. Make a 4-shaped loop, thread the tube into it and tighten. Repeat this one more time to complete the knot.

The next node is indicated by an arrow pointing to the left. Take the black tube in your hands and tighten the knot twice, twisting the tube into a reverse four. That's all, nothing complicated.

Curved arrow to the right.

The fourth and final type of knot is indicated by an arrow curving from left to right. This node is done in the same way as the first, but exactly the opposite. First make a loop similar to the mirrored number four and tighten the knot, then into the correct four. Now you know how to weave knots using the oblique weaving technique.

You will learn other interesting weaving patterns, for example, square or round, by watching the videos below.

Related videos

Beautiful weaving of tubes - bracelets, baubles, various accessories. Sometimes you want to add some zest to the created image that would complement and improve the appearance. Many people adorn their wrists with natural stones and jewelry. But you must admit that they do not always suit some styles. For example, youth style is simple. And accessories woven from different colored materials are best suited for him. How to make your own stylish product? Let's talk about this in the article.

Magic in the elementary

Few people know, but products made from tubes look more interesting than from satin ribbons or beads. In our time, such works are original and are rarely used. Many people think that colored straws are very difficult. But this is completely different.

By the way, the official name is Skubidu. It comes from a song by a French artist who was popular in the 50s. Fans, in order to please the idol, made a bracelet from scrap materials. Since then, straws have begun to appear actively throughout Europe.

You don't need a lot of materials to work. Just tubes (in a pack there are enough for 2-3 products), a knife or scissors and diagrams, if the work is complicated.

It is best to use special flagella, not for cocktails. They are more obedient and of higher quality. This material is suitable for all beginners, but you need to know the basic rules for working with them.

First, the tool breaks easily. It must be remembered that it is better not to take spoiled ones, because then the probability of fragility of the product is high. Secondly, think over the products from A to Z. In the process of work, it is better not to be distracted, so that the work does not unravel. Thirdly, if you use a master class for work, pay attention to the number of flagella and their sizes from the craftswoman.

Prepare your work area before work. Remove unnecessary items so that they do not distract or interfere. Take a heavy object to secure the ends of the tubes. Now let's look at how to weave a product with different patterns.

Lace process

Option number 1 - pigtail.

This is the easiest method. We use three tubes for work. But it all depends on the desire of the master - you can take more, weaving them. Consider a photo:

This method is suitable for any material - ribbons, leather and plastic cords.

Option number 2 - even.

Let's try to make a product from an even quantity. We take from 6 to 10 flagella pieces. The quantity is of great importance - the size of the product depends on them. Move one of the central tubes from left to right, and then from right to left. We repeat these steps to the end.

Option number 3 - spiral weaving.

1. Divide the harnesses by the letters - A, B, C, D, D and E.
2. Put A and B down. They should be to the right of the rest of the flagella.
3. Put C and D up. Make sure they are to the left of the rest of the cords.
4. D over loop 1 into loop 2. Pass on loop 3, threading into loop 4.
5. We do this with the end of E.
6. Tighten all flagella firmly. Repeat the steps until the end of the product. The end result is a multi-colored spiral braid for beginners.

What a beautiful bauble you get as a result:

Option number 4 - square weaving.

This method is performed with 4 cords. Masters advise to use 4 colors, but if you wish, you can also 2 of two colors.

1. We lay the material in a cross. We put flagellum A down, thus a loop is obtained.
2. We put B up, creating a loop.
3. We shift B to the left, threading segment B. Weave with a square.
4. The end of the D flagellum must be moved to the right, threaded into the loop of the end A - secured in a "lock".
5. It remains to firmly tighten the ends, we continue to work until the end of the product. Measure the end of the work by the size of your wrist.

It turns out a square shape with multi-colored flagella.

Note! Each product must be secured so that the bauble or keychain does not unravel during wearing.

We do it step by step:

No. 1 (with a brush) - working with the last row. Do not tighten the flagella. We pass each end in a circle under the subsequent flagellum. Twist to center and tighten firmly. How to do this is shown in the picture:

# 2 (blunt end) - Tighten the outer row, trim the ends. The product is ready. It is not necessary to melt the flagella.

Beads can be inserted into baubles to diversify needlework. We make a round plexus, string a bead onto the strengthening flagellum. We continue weaving, as a result the flagella are woven over the bead.

This method is difficult when working with "breaking" material. Therefore, consider each step ahead.

Similar products can be obtained:

If you want to learn a new skill, then weaving bracelets from colored tubes will certainly interest you. Is it possible to do something from such material and how to work with it, we will consider below. We need imagination, inspiration, luck and some free time.

Basis of labor

This weaving is called Scoobydu (not to be confused with a cartoon and a dog). In France in the 20th century there was a performer who wrote a song of the same name. Fans, in order to please their favorite idol, made a bracelet made of tubes as a keepsake. So they gave him their love.

This is probably why weaving is especially popular among children and adolescents, as they are young and bright, and often show their love and care through the creation of souvenirs. The manufacturing technology is very light, such an activity is especially suitable during family evenings - you can consult, boast and give a gift.

Plastic harnesses are used for work. They are of different sizes and have more colors than a rainbow. The length is various - from 80 cm to 100 cm. The tubes can also be round or flat.

There are two types of weaving - square and round... They differ in appearance and complexity. In light master classes for beginners, everything is described and shown in detail, so there will be no problems with implementation.

Square is woven from four plaits:

The round is woven in the same way:

Both weaves start the same way. The length of the tubes should be 3-4 times the length of the product. You need to take 4 plaits of different colors, tie them in a knot. This is the beginning of any work. You can use 2 harnesses to make an accessory, but then they need to be tied, as shown in the picture.

Don't use cocktail strawsbecause they break easily. The material for future beauty should be more flexible! If there are thin tubes, then the products will be more elegant. But it is best to use a squid. Let's consider the stages of work.

Where to begin

In order to make an ordinary bracelet, there is a scheme according to which you need to work.

It shows each movement with arrows. This product is made with two bundles. The picture shows the first and main steps that you need to repeat later.

Picture number 5 - tighten the tubes tightly, but not tightly so that they do not break or break.

Picture number 6 is the first stitch that will turn out. Repeat all steps until the product is the desired size. Tip - put the bracelet on your hand so as not to be mistaken with the length of the product.

The four-tube accessory is a little more complicated. Let's take a closer look at it:

1. Make a knot as described above. We take it with the index and thumb.
2. Pull the tubes apart, pulling them out. Do not hang the product, put it on a table or board.
3. Getting started with a green harness. We put it on a yellow loop, a yellow loop on a blue loop, creating a loop, a blue loop on a red one, and finish with a red loop - thread it into a green loop.

1. Pull out all the tubes neatly, creating a square.

Colorful world

Weaving baubles can be done with different knots, for example, "twisted", "brick", "macrame", etc.

Such a bracelet is created using a twisted knot.

1. Take three tubes of different colors, beads to decorate the product. Bend one of the strands, leaving a bead-sized loop. We fold it with the other and wrap it with a thread, which we will conventionally call a knotted thread.

1. Base flagella must be braided to the required size. Do not forget to string the beads on the knotted tube, keeping the gaps. Pull all the threads through the bead at the end of the piece. Trim the ends carefully.

How to weave a brick

Such a knot is more complicated than usual, but the products look more refined and interesting.

1. We put two flagella perpendicular to the third. Bring the end of the horizontal tube onto the vertical ones, as shown in the photo.

1. We stretch the end of the left flagellum into the loop, while bending the upper one down. We carry out under the lower horizontal tube.

1. Repeat the previous steps with the end of the right thread, pulling the knot. It turns out a "brick".

1. Follow the pictures to complete the finish. Be careful with the movement of the tubes so as not to get confused, mentally mark them with numbers.

If you need to add a new flagellum to the product, then repeat the following steps:

1. Apply a new tube to the semi-finished work, placing it diagonally.

1. Now we carry out two rows with old flagella to secure the weaving. Trim the ends of the old tubing.

Skubidou are universal tubes. Because they can make many products. These are not only bracelets, but also figures, pens, purses, photo frames and toys. Basically, one pack of flagella is enough for several works, so we boldly call needlework quite budget.

Related videos

For inspiration on the process, you can watch the tutorial videos: