We always have a large number of fresh current vacancies on our website. Use filters to quickly search by parameters.

For successful employment, it is desirable to have a specialized education, as well as possess the necessary qualities and work skills. First of all, you need to carefully study the requirements of employers in the chosen specialty, then start writing a resume.

You should not send your resume to all companies at the same time. Choose suitable vacancies based on your qualifications and work experience. We list the most significant skills for employers that you need to successfully work as an electrician as a lineman in Russia:

Top 7 Key Skills You Need to Get a Job

Also quite often in vacancies there are the following requirements: electric power industry, construction and negotiation.

When preparing for an interview, use this information as a checklist. This will help you not only to please the recruiter, but also to get the desired job!

Analysis of vacancies in Russia

According to the results of the analysis of vacancies published on our website, the indicated starting salary, on average, is - 71,634. Keep in mind that these figures are statistics. The actual salary during employment can vary greatly depending on many factors:

• Your previous work experience, education
• Type of employment, work schedule
• Company size, industry, brand, etc.

Salary depending on the experience of the applicant

Unified Tariff and Qualification Directory of Works and Professions of Workers (ETKS), 2019
Issue No. 3 ETKS
The issue was approved by the Order of the Ministry of Health and Social Development of the Russian Federation dated April 6, 2007 N 243
(as amended by: Orders of the Ministry of Health and Social Development of the Russian Federation of November 28, 2008 N 679, of April 30, 2009 N 233)

Overhead line electrician high voltage and contact network

§ 448

Job Description. Production of small fastening parts that do not require exact dimensions. Deepening of ground electrodes manually. Cleaning of uninstalled steel supports of overhead lines (VL) and structures of open substations. Painting parts for attaching attachments and grounding bars. Brushing the details of wooden supports with antiseptic compounds. Removing the casing from the drums and disassembling them. Rolling wires and cables manually.

Must know: main brands of linear fittings, insulators, wires and cables; range of steel and hardware; rules for handling antiseptic compounds and methods for antiseptic timber; railway signaling rules; methods of coloring wires and grounding buses; ways of deepening ground electrodes manually; name and purpose hand tool and the devices used.

§ 449

Job Description. Installing or removing pin hooks and insulators from uninstalled poles. Rolling out steel ropes, cables and single-core wires with the installation of drums. Lifting wires to the supports of overhead lines with voltage up to 20 kV using rods and poles. Cutting and cutting of wires and cables. Laying of grounding slopes, installation of the ground loop. Deepening of earth electrodes with a mechanized tool. Waterproofing of reinforced concrete structures. Painting of uninstalled steel supports of overhead lines and structures of open substations. Numbering of supports and fastening of tables and posters. Winding wires and cables on drums with sewing of drums. Delivery of structures and materials. Moving structures manually.

Must know: types of fasteners, fittings, insulators, wires and cables; device used electrified and pneumatic hand tools; the main types of building structures of overhead lines and open substations; device and rules for using the rigging equipment used; grounding and grounding rules.

§ 450

Job Description. Assembly of supports for overhead lines and structures of open substations weighing up to 5 tons. Procurement of parts for wooden supports. Installation and dismantling of overhead line supports and structures of open substations weighing up to 1.5 tons. Rolling out and lifting wires onto overhead line supports with a voltage of up to 150 kV and cables - up to 750 kV. Production of descents, jumpers, loops and half loops from wires and cables. Installation of arresters. Transitional protection device. Assembly of insulators and fittings into insulating hangers for overhead lines with voltage up to 220 kV. Connection of wires and cables with a cross section of up to 70 mm2. Fixing wires on pin insulators of overhead lines with voltage up to 1 kV. Marking and installation of link and elastic strings on the carrier cable from the ground. Installation of fittings on consoles and flexible crossbars. Installation of load limiters of compensated anchoring, fixing and feeder brackets on supports. Installation of the middle anchor on the ground. Suspension of a carrier cable from the ground on a support. Inserting insulators into wires and cables on the ground. Installation of interrail connections. Manufacture and connection of cable braces to supports. Completion of rigid crossbars. Painting of the installed supports of overhead lines and structures of open substations. Dismantling of wires and cables of overhead lines and contact networks with voltage up to 150 kV. Straightening of single-column supports with voltage up to 20 kV. Arrangement of cable channels and emergency oil drain. Installation of inputs of overhead lines in buildings. Installation of luminaires on poles.

Must know: methods for assembling poles of overhead lines and structures of open substations weighing up to 5 tons; methods of installation of overhead line supports and structures of open substations weighing up to 1.5 tons; the procedure for laying out and assembling insulators and fittings into insulating hangers for overhead lines with a voltage of up to 220 kV; methods of connecting wires and cables with a cross section of up to 70 mm2; methods of lifting and fastening wires and cables on supports; the purpose and methods of manufacturing and installing tires, slopes, jumpers and loops from wires and cables; ways to install load limiters and feeder brackets on supports; ways to install arresters; types and methods of installation of protections for transitions; rules for the use of mechanized rigging equipment and tools; types of fixtures and how to install them.

§ 451

Job Description. Assembly of overhead line supports and structures of open substations weighing more than 5 to 10 tons. Installation and dismantling of supports of overhead lines and structures of open substations weighing more than 1.5 to 5 tons, except for supports on guys, hingedly mounted on foundations. Connection of wires and cables with a cross section of more than 70 to 800 mm2. Rolling out stranded wires from non-ferrous metals. Rolling and lifting of wires on the supports of overhead lines with a voltage of over 150 to 750 kV and cables - over 750 kV. Fastening wires on pin insulators of overhead lines with a voltage of over 1 kV. Assembly of insulators and fittings into insulating hangers for overhead lines with a voltage of over 220 kV. Installation of vibration dampers and spacers on wires and cables. Tensioning and regulation of wires and cables on overhead lines with voltage up to 150 kV. Relocation of wires and cables on supports of overhead lines with voltage up to 150 kV. Installation of loops. Installation of a contact wire limiter. Installation of single and double track consoles. Installation of flexible crossbars. Installation of medium anchors. Installation of electrical connectors and outlets of all types. Rigid anchoring of the carrying cable, power and reinforcing wires. Lifting the chain suspension under the heel of the console and transferring to the saddle. Dismantling of wires and cables of overhead lines with voltage over 150 kV. Editing complex supports of overhead lines with voltage up to 20 kV.

Must know: methods for laying out pits and places for piling at the pickets of overhead lines and contact networks; methods for assembling poles of overhead lines and structures of open substations weighing more than 5 to 10 tons; methods for installing overhead line supports and structures of open substations weighing over 1.5 to 5 tons; the procedure for laying out and assembling insulators and fittings into insulating hangers for overhead lines with a voltage of over 220 kV; the procedure for phasing wires of contact networks and methods for checking the work performed according to the schemes; methods of connecting wires and cables with a cross section of more than 70 to 800 mm2; methods of rolling multiwire wires from non-ferrous metals; the procedure for rolling and lifting cables to the supports of overhead lines with a voltage of over 750 kV and wires - over 150 to 750 kV; ways to install spacers, vibration dampers, on wires and cables of overhead lines and limiters of the contact wire; methods of mounting loops, flexible crossbars, mates, anchor sections; rules for regulating wires and cables on overhead lines with a voltage of up to 150 kV and contact suspension circuits on hauls and stations; methods of rigid anchoring of wires on the supports of the contact network; ways of laying wires and cables on supports of overhead lines with voltage up to 150 kV; ways of installation and dismantling of arrows and intersections of the contact network.

§ 452

Job Description. Assembly of overhead line supports and structures of open substations weighing over 10 to 25 tons. Installation and alignment of reinforced concrete foundations. Installation and dismantling of supports for overhead lines and structures of open substations weighing more than 5 to 20 tons and supports on guys, pivotally installed on foundations, weighing up to 15 tons. Connection of wires with a cross section of more than 800 mm2. Rolling and lifting of wires on the supports of overhead lines with a voltage of over 750 kV. Installation of a load compensation unit for the tension of contact wires. Compensated anchoring of contact wire and carrying cable. Installation of fixing braces of a chain suspension, mates of anchor sections, air arrows, contact network in artificial structures, sectional insulators. Installation of supports on the main railways in operation. Tensioning and regulation of wires and cables on overhead lines with voltages over 150 to 750 kV. Relocation of wires and cables on the supports of overhead lines with a voltage of over 150 to 750 kV. Installation of wire transpositions on overhead lines with voltage up to 750 kV. Editing of supports of overhead lines with voltage over 20 kV. Breakdown of the route of overhead lines with voltage up to 20 kV.

Must know: methods for assembling poles of overhead lines and structures of open substations weighing over 10 to 25 tons; methods of installing overhead line supports and structures of open substations weighing over 5 to 20 tons; rules for installing transpositions of wires on overhead lines with voltage up to 750 kV; methods of connecting wires with a cross section of more than 800 mm2; rules for installing wires and cables at crossings; methods of compensated anchoring of the contact wire and the carrier cable; installation methods for chain suspension braces, anchor sections, air arrows, contact network in artificial structures, sectional insulators; methods of installation and alignment of supports on the main and station lines of railways; types of portable radio stations and rules for handling them; types of theodolites and levels and rules for using them.

§ 453

Job Description. Assembly of overhead line supports and open substation structures weighing over 25 tons. Installation and dismantling of overhead line supports and open substation structures weighing over 20 tons and supports on guy wires hinged on foundations weighing over 15 tons. Installation of monolithic foundations. Installation of transpositions of wires of overhead lines with voltage over 750 kV. Installation of wires and cables at crossings over large water barriers. Tensioning, regulation and relaying of wires and cables on overhead lines with a voltage of over 750 kV. Installation of foundations, supports, wires and cables using helicopters. Restoration of the breakdown of individual sections of the route, elevations of foundations and axes of pits of overhead lines with a voltage of over 20 kV.

Must know: methods for assembling poles of overhead lines and structures of open substations weighing more than 25 tons; methods for installing overhead line supports and structures of open substations weighing more than 20 tons and supports on guy wires, hingedly mounted on foundations, weighing more than 15 tons; rules for the arrangement and alignment of monolithic reinforced concrete foundations; rules for the installation of wires and cables at crossings through large water barriers; ways of doing installation work during the construction of overhead lines using helicopter technology; rules for regulating wires and cables on overhead lines with a voltage of over 750 kV; ways to restore the breakdown of individual sections of the overhead line (industrial picketage).

Requires secondary vocational education.

March 12, 2020 - An electrician-linearist is required for the installation of high voltage overhead lines and a contact network. Work on a rotational basis at facilities located in Khanty-Mansi Autonomous Okrug, YNAO. The office is located in Surgut. Requirements: High School Diploma Experience...

March 12, 2020 - An electrician-linearist is required for the installation of high voltage overhead lines and a contact network. Work on a rotational basis at facilities located in Khanty-Mansi Autonomous Okrug, YNAO. The office is located in Surgut. Requirements: High School Diploma Experience...

March 12, 2020 - An electrician-linearist is required for the installation of high voltage overhead lines and a contact network. Work on a rotational basis at facilities located in Khanty-Mansi Autonomous Okrug, YNAO. The office is located in Surgut. Requirements: High School Diploma Experience...

March 12, 2020 - An electrician-linearist is required for the installation of high voltage overhead lines and a contact network. Work on a rotational basis at facilities located in Khanty-Mansi Autonomous Okrug, YNAO. The office is located in Surgut. Requirements: High School Diploma Experience...

March 12, 2020 - An electrician-linearist is required for the installation of high voltage overhead lines and a contact network. Work on a rotational basis at facilities located in Khanty-Mansi Autonomous Okrug, YNAO. The office is located in Surgut. Requirements: High School Diploma Experience...

March 12, 2020 - An electrician-linearist is required for the installation of high voltage overhead lines and a contact network. Work on a rotational basis at facilities located in Khanty-Mansi Autonomous Okrug, YNAO. The office is located in Surgut. Requirements: High School Diploma Experience...

March 12, 2020 - An electrician-linearist is required for the installation of high voltage overhead lines and a contact network. Work on a rotational basis at facilities located in Khanty-Mansi Autonomous Okrug, YNAO. The office is located in Surgut. Requirements: High School Diploma Experience...

March 12, 2020 - An electrician-linearist is required for the installation of high voltage overhead lines and a contact network. Work on a rotational basis at facilities located in Khanty-Mansi Autonomous Okrug, YNAO. The office is located in Surgut. Requirements: High School Diploma Experience...

March 12, 2020 - An electrician-linearist is required for the installation of high voltage overhead lines and a contact network. Work on a rotational basis at facilities located in Khanty-Mansi Autonomous Okrug, YNAO. The office is located in Surgut. Requirements: High School Diploma Experience...

March 12, 2020 - An electrician-linearist is required for the installation of high voltage overhead lines and a contact network. Work on a rotational basis at facilities located in Khanty-Mansi Autonomous Okrug, YNAO. The office is located in Surgut. Requirements: High School Diploma Experience...

March 12, 2020 - An electrician-linearist is required for the installation of high voltage overhead lines and a contact network. Work on a rotational basis at facilities located in Khanty-Mansi Autonomous Okrug, YNAO. The office is located in Surgut. Requirements: High School Diploma Experience...

March 12, 2020 - An electrician-linearist is required for the installation of high voltage overhead lines and a contact network. Work on a rotational basis at facilities located in Khanty-Mansi Autonomous Okrug, YNAO. The office is located in Surgut. Requirements: High School Diploma Experience...

March 12, 2020 - An electrician-linearist is required for the installation of high voltage overhead lines and a contact network. Work on a rotational basis at facilities located in Khanty-Mansi Autonomous Okrug, YNAO. The office is located in Surgut. Requirements: High School Diploma Experience...

March 11, 2020 - Responsibilities: - Construction of overhead power lines - assembly of poles, installation of wires and cables on VL35KV based on metal poles. Requirements: You must have a certificate of education in the special "lineman" and work experience ...

March 11, 2020 - Responsibilities: - Construction of overhead power lines - assembly of poles, installation of wires and cables on VL35KV based on metal poles. Requirements: You must have a certificate of education in the special "lineman" and work experience ...

March 11, 2020 - Responsibilities: - Construction of overhead power lines - assembly of poles, installation of wires and cables on VL35KV based on metal poles. Requirements: You must have a certificate of education in the special "lineman" and work experience ...

March 11, 2020 - Responsibilities: - Construction of overhead power lines - assembly of poles, installation of wires and cables on VL35KV based on metal poles. Requirements: You must have a certificate of education in the special "lineman" and work experience ...

March 11, 2020 - Responsibilities: - Construction of overhead power lines - assembly of poles, installation of wires and cables on VL35KV based on metal poles. Requirements: You must have a certificate of education in the special "lineman" and work experience ...

March 11, 2020 - Responsibilities: - Construction of overhead power lines - assembly of poles, installation of wires and cables on VL35KV based on metal poles. Requirements: You must have a certificate of education in the special "lineman" and work experience ...

March 11, 2020 - Responsibilities: - Construction of overhead power lines - assembly of poles, installation of wires and cables on VL35KV based on metal poles. Requirements: You must have a certificate of education in the special "lineman" and work experience ...

March 11, 2020 - Responsibilities: - Construction of overhead power lines - assembly of poles, installation of wires and cables on VL35KV based on metal poles. Requirements: You must have a certificate of education in the special "lineman" and work experience ...

March 11, 2020 - Responsibilities: - Construction of overhead power lines - assembly of poles, installation of wires and cables on VL35KV based on metal poles. Requirements: You must have a certificate of education in the special "lineman" and work experience ...

March 11, 2020 - Responsibilities: - Construction of overhead power lines - assembly of poles, installation of wires and cables on VL35KV based on metal poles. Requirements: You must have a certificate of education in the special "lineman" and work experience ...

February 25, 2020 - In connection with the expansion of the staff, the RSO-Energo Company, specializing in the construction of power lines from 0.4 to 10 kV, is recruiting ELECTRIC LINE MANAGERS, we are also considering the formed BRIGADES (work on a permanent basis, NOT WATCH !!! ). Conditions: Stable...

March 16, 2020 - Responsibilities: Construction of overhead, cable power lines 0.4-6-10 kV Installation of RP-TP and TP 6-10 / 0.4 kV Electrical work Requirements: Profile education Work experience from 1 year Conditions: Registration in accordance with the Labor Code Trial Size...

February 21, 2020 - Requirements: Experience in the installation of overhead power lines 0.4-10 kV cable lines, installation of reinforced concrete supports; Work experience of at least one year; Conditions: Employment and social package in accordance with the Labor Code of the Russian Federation. Business trip mode. White salary, vacation, sick leave...

March 3, 2020 - Responsibilities: In the field of performing a set of works for the construction of technological connection facilities (overhead lines and cable lines 0.4-35 kV, transformer substations 6-10 / 0.4 kV, outdoor switchgear, indoor switchgear 6/10/35 kV): Implementation of the plan work on technological connection on the basis of an agreed...

February 19, 2020 - Responsibilities: performance of work on the contact network and 6/10 kV overhead lines (installation of foundations, anechers, metal and reinforced concrete supports, assembly and installation of rigid crossbars) installation of contact suspension fittings and 6/10 kV overhead lines (reinforcement of supports, crossbars tough...

February 25, 2020 - Responsibilities: In the field of performing a set of works for the construction of technological connection facilities (overhead lines and cable lines 0.4-10 kV, transformer substations 6-10 / 0.4 kV, SP and RP 6-10 kV): Implementation of the work plan for technological connection on the basis of an agreed schedule...

February 13, 2020 - In connection with the opening of a branch in the city of Kingisepp, the RSO-Energo Company, which specializes in the construction of power lines from 0.4 to 10 kV, is recruiting ELECTRIC LINE MANAGERS, we are also considering the formed TEAM (work on a permanent basis, NOT SHIFT !!!) ...

March 9, 2020 - Difficult work on the installation and repair of overhead power lines, work at height, movement of goods weighing more than 10 kg. Work in existing electrical installations. Contact person: Krichevskaya Valeria Sergeevna Requirements for candidates: Work experience is required...

March 15, 2020 - Contact person: Alexander Nikitin Requirements for the candidate: Responsibilities: Standard for an electrician-lineman - performing work on the construction of overhead power lines 35 kV (assembly of supports, installation of wires and cables). Requirements: Education...

March 15, 2020 - Contact person: Alexander Nikitin Our requirements: Responsibilities: Standard for an electrician-lineman - performing work on the construction of overhead power lines 35 kV (assembly of supports, installation of wires and cables). Requirements: Degree in...

March 15, 2020 - Contact person: Alexander Nikitin Qualifications: Responsibilities: Standard for an electrician-lineman - construction of overhead power lines 35 kV (assembly of supports, installation of wires and cables). Requirements: Education in...

March 15, 2020 - Contact person: Nikitin Alexander Requirements for candidates: Responsibilities: Standard for an electrician-lineman - performing work on the construction of overhead power lines 35 kV (assembly of supports, installation of wires and cables). Requirements: Education...

Job electrician lineman vacancy electrician lineman in Moscow. Vacancy electrician lineman from direct employer in Moscow job advertisements electrician lineman Moscow, vacancies of recruitment agencies in Moscow, looking for a job electrician lineman through recruitment agencies and from direct employers, vacancies electrician lineman with and without work experience. The site of announcements about part-time work and work Avito Moscow job vacancies electrician lineman from direct employers.

Work in Moscow electrician lineman

Site work Avito Moscow work fresh vacancies electrician lineman. On our site you can find a highly paid job as an electrician lineman. Look for a job as an electrician lineman in Moscow, view vacancies on our job site - a job aggregator in Moscow.

Avito jobs Moscow

Work electrician lineman on the site in Moscow, vacancies electrician lineman from direct employers Moscow. Vacancies in Moscow without work experience and highly paid with work experience. Vacancies electrician lineman for women.