Do-it-yourself cotton candy machine. Homemade cotton candy machine Do-it-yourself cotton candy head
Lollipops at home
Most children are real sweet tooth, which gives parents a lot of trouble. After all, moms and dads, worrying about the health of their babies, try to limit the amount of harmful caramels and chewing gum with food additives. If you want to please your child with a tasty treat with minimal risk to his health, try making lollipops at home. Of course, such a delicacy cannot be called useful, but it will not contain any chemical dyes and preservatives.
Ingredients:
1 kg of granulated sugar
3 ml vinegar essence
1 liter of water
1 sachet of food coloring
Dishes:
enameled container
cotton candy machine
How to make cotton candy in the machine:
- Dissolve sugar in water and boil it over a fire, then continue to boil for another 10 minutes, and then add a drop of vinegar essence to the syrup.
- Boil the resulting mixture for 10 minutes, then reduce the heat and cook the syrup for another 25 minutes until it acquires a thick, homogeneous consistency.
- Then add food coloring to it (optional), turn on the machine and slowly pour a thin stream of sugar syrup onto the edge of its disc.
- In the process of hardening, the syrup will turn into cotton candy - after waiting for this, turn off the machine, separate the resulting mass from the disk and cut it with a knife in diameter.
- Roll both resulting semicircles into tubes on cutting board and cut them into several servings, which are desirable to consume immediately after preparation.
- However, if you want to save some cotton candy for storage, take a plastic bag, carefully place the treat in it, and place the bag on the bottom or middle shelf of the refrigerator.
- Do not put cotton wool in the freezer - there it will stick together and turn into a lump of frozen sugar.
Cotton candy without apparatus
Ingredients:
1 ½ cups sugar
½ glass of water
1-2 drops of food grade vinegar
some food coloring
Dishes:
forks (Chinese sticks or whisks)
pan Pan)
How to make cotton candy without a machine:
- Secure the forks upright on the table with something heavy to support them, and make sugar syrup by mixing water with sugar and vinegar.
- To give a treat beautiful color Add food coloring to the mixture and mix thoroughly.
- Pour the syrup into a saucepan and heat it over low heat, stirring constantly - when it boils, remove the saucepan from the heat, cool slightly and heat again. Repeat the procedure until the syrup turns golden brown - but make sure that it does not darken.
- After obtaining a thick golden mass of a viscous consistency, dip a whisk in it and drive it around vertically fixed forks, winding sugar threads around them until a fluffy hat is obtained. If the cotton wool turns out to be too loose, compact it with your hand, but be careful - hot threads of sugar syrup can severely burn the skin.
- After making cotton candy, take your time to get rid of the remaining sugar mass.
- Take the rest of the syrup that has cooled down and break it into pieces with a knife - this way you get delicious golden candies that both children and adults will enjoy eating.
What child, going to the park with his parents for a holiday, does not ask for cotton wool? This white air mass of sugar is liked by many kids. And so that the feeling of fun and good mood always accompanies our kids, parents can cook such a delicacy on their own. How to make cotton candy at home is described in this article.
Making cotton candy using improvised means
1. Prepare the syrup, and for this you will need: sugar (300 g), water (100 g) and half a teaspoon of vinegar. Mix all the ingredients, pour the mixture into a small saucepan and put it on a slow fire. To make cotton wool bright, you can add a natural dye, for example, beetroot juice or raspberry jam.
2. Be sure to stir the contents so that the sugar does not burn. When the syrup boils, remove the pan from the heat and wait 5 minutes for it to cool. Repeat this procedure 4 times. The syrup will be ready when it begins to stretch and turns golden brown.
If the mass is undercooked, then as a result, the cotton wool will turn out to be not airy, it will be heavy and wet, it will begin to stick to the teeth.
And if the syrup is digested, then the delicacy can eventually turn out to be tough, even a little prickly.
3. Let's move on to the formation of a familiar figure: take the usual forks in the amount of 3 pieces. Place two of them in glasses at a distance of about 5 cm from each other. And dip the third fork in hot syrup and start driving around the other two cutlery so that the sugar cobweb is wound around them. Be careful not to get the hot solution on your hands and burn them. Do-it-yourself cotton candy is ready, and now you can enjoy this delicate and pleasant delicacy.
Dessert preparation with a special device
A device for cotton candy can be bought at a hardware store, however, not everyone can afford such a unit. Its price ranges from 10,000-20,000 rubles. But if you are lucky, and you have purchased such a device, then preparing cotton candy with it will not be difficult. This delicacy is made as follows:
1. Pour 1.5 teaspoons of sugar into the center of the rotating bowl, and then plug the appliance into the mains.
2. After a minute, white sweet threads will begin to form inside the bowl, so you need to catch them. To do this, take a stick on which you will wind the cotton wool, determine it vertically above the container and wait until the threads begin to cling to it. Then, in a horizontal position, continue winding the sweetness around the holder.
One serving of cotton wool with this method of preparation takes only 1.5 teaspoons of sugar. If you want to make a treat for two sweet teeth (or even more), then you need to clean the bowl so that subsequently the syrup does not stick to it.
Now you know how to make cotton candy at home using a special device for making dessert. Now find out how you can make such a treat without using a special unit. Rather, the device will still be, but you will make it yourself.
List of elements for making a homemade device
If you can’t afford a special device for making sweets, then you can make it yourself, armed with the following materials:
1. Plastic vessel with a volume of 5 liters.
2. Engine (no need to bother, a regular motor from any children's toy will do).
3. A metal lid from a can (its size should be slightly larger than the neck of the bottle).
4. Power supply from cell phone. The power of the charger should be in the range of 12-20 V.
5. Cardboard box. It should fit a bottle.
How to make cotton candy at home using this homemade device? Detailed instructions are provided in the next section.
Detailed instructions for the manufacture of the device
1. Connect the plastic and metal covers and make a hole in each of them, and then insert the motor so that its sharp end comes out through the hole. The plastic cap must be at the bottom so that the bottle can be screwed on.
2. Connect the power supply to the motor.
3. Place the machine in the box.
A homemade device for cotton candy is ready. It remains to learn how to get sweetness.
Cooking treats with a homemade machine
1. Lubricate the metal cap sunflower oil. This is necessary so that the mixture does not stick to the cap.
2. Take out a steel mug and pour 4 teaspoons of sugar and 1 tablespoon of water into it. Food coloring can be added if desired.
3. Put the cup on the fire and constantly mix its contents. You need to keep the dishes on the burner until the sugar in the mug is completely dissolved. The mass should acquire a brown tint and ductility.
4. You need to cook quickly so that the caramel does not have time to harden. Quickly start the unit and start pouring the mass in a small stream onto the metal cover. Caramel will scatter in different directions and start cobwebs.
Now you can easily answer the question: “How to make cotton candy at home without a special apparatus?”
1. You need to use cotton candy immediately, because after a while it becomes dense and not so tasty.
2. In order for this delicacy to turn out not only tasty, but also bright, you can add food coloring.
3. For the preparation of such yummy, it is necessary to use only loose dry sugar, but refined sugar or a wet product is not suitable.
4. The hardened remains of the syrup should not be thrown away - they make delicious golden sugar candies.
5. Before starting the process, it is advisable to cover the floor and table in the kitchen with cellophane. Because drops of syrup will scatter, and removing them from the surface is not so easy.
6. During cooking, you need to take the children out of the kitchen so that they are not burned by drops of syrup that accidentally fall on their skin.
7. Forks, whisks, Chinese sticks can be used as a cotton wool holder.
Making cotton candy is not an easy process, but if you strictly follow all the recommendations, then you will get a wonderful dessert. And with the presence of a special device, without any problems, you can make this delicacy at least every day.
Good afternoon, dear readers!
Today, I will describe How to make a cotton candy machine at home.
There is nothing complicated in the design, everything is simple. Also at the end I will write the ingredients for the cotton wool itself.
We will need:
- motor (not a big motor, you can pull it out of the toy);
- lid, which roll up the banks (iron);
- medium box;
- adhesive tape, electrical tape;
- scissors;
- blank paper;
- motor power supply (you can take a charger from your phone and cut off the plug).
It seems that everything, during the text, if not all the details have been added, will be seen.
The manufacturing process of the device
So, let's start, first we take the motor and connect it to the power supply. I cut the USB from the phone and connected the wires to the motor. Thus, you can connect to any USB socket.
So, the motor itself needs to be attached somewhere, I have a motor of this shape and I used a can of bullets for pneumatics as a mount for it, you can think of something else!
The motor itself still needs to be fixed in the box, I decided to make a removable motor, the can of bullets is divided into two parts. The photo makes sense.
We isolate the motor itself well so that the motor does not clog during the manufacture of cotton candy, you can put it in some container, you can wrap it with tape.
Now we need a box. You need to take the middle box, for example, I took the first one that came across. Only the top should be open in it, the rest of the parts are closed.
Here in the photo you can see the shape of the box, however, I cut the hole myself, it turned out crooked.
It is not known what was in the box. Therefore, in order to protect ourselves, it was decided to glue it with something inside, I used food paper, cakes, pies and the like are usually baked on it. If you don’t have it, you can use clean paper, oilcloth, well, who has enough imagination for what.
To keep the paper confident, I glued it with tape on the sides:
Now the next step, we need to fix the motor in the center of the box so that it holds confidently and does not go around much. You also need to remove the wire so that it does not stick out there.
Next, we need an ordinary iron lid, which is used to roll up cans, the lid must be fixed on the rotating part of the motor, at the top. You need to attach as evenly and tightly as possible. Be sure to check that the motor turns the lid and does not scroll, and that the lid spins as smoothly as possible.
Everything, the most important thing we have done, cheers! The matter remains small, to prepare the "mixture" itself for the preparation of cotton candy.
Who prepared the so-called "cockerels" in sugar molds, he will already begin to guess what will be discussed.
Who does not understand, we read:
We need:
Sugar;
- water;
- spoon;
- and some kind of capacity.
We take sugar, fall asleep in a container where we will cook, add water. You should get a homogeneous mass, not very thick and not very liquid. Don't overdo it with water!
After pouring sugar and water, mix a little, put on fire and cook on fire, the main thing is to stir thoroughly, otherwise there will be lumps of sugar. Cook until the mass becomes brown already, there will be bulbs - this is normal.
After we have cooked, do not let it cool down, turn on the motor, the lid starts to spin, we start pouring the overcooked sugar from the container directly onto the lid and observe the appearance of cotton candy!
The main thing is not to rush, not to pour out a lot at once, but also not to hesitate, otherwise the mass of sugar will harden and nothing will work out, it’s better to warm it up once again. That's it, bon appetit everyone. There was no opportunity to capture the process itself, this is my second “apparatus” for cotton candy, I didn’t do it, but I did it the first time more than once, it turned out no worse than the purchased one! You can add dyes, flavors, this will give the look, taste and smell of your cotton candy. If I get a chance, I'll try to post pictures of the process.
We will show you how you can make cotton candy at home and make an apparatus for it from an ordinary fan with your own hands. For work, we need 2 CD disks, we cut out two “washers” from them:
They are made easily and simply, something round is applied to the disk, for example a coin, we circle it with a marker. After that, we heat the clerical knife and easily cut out all the excess. A hole in the center can be made with the help of also heated on the stove.
To begin with, we take the disk that remains with us and glue our washers to it, this must be done strictly in the center, if we neglect this rule, our disk will vibrate, in the end nothing will work.
Our nozzle for the cotton candy machine is ready, now let's move on to the fan. We lay it on the floor and remove the protective cover, then remove the propeller. We take the middle box, make a round hole in its bottom:
Our machine for making cotton candy is ready, as you can see, everything is done by hand, very simply and at home. Now it remains to prepare the syrup.
do-it-yourself cotton candy machine
It is done very simply, put a large metal mug of water or a small saucepan on medium heat, add 50 to 50, sugar and water, mix everything thoroughly. The syrup will be ready when a yellowish tint appears, but in no case should it be dark brown. Now you can proceed directly to the manufacture of cotton candy, turn on our apparatus and start pouring the syrup onto the “disk” in small drops:
It turns out excellent cotton candy, not worse than that, which you could try in parks and public events. After making cotton candy, the fan is easily assembled back.
Video how to make a do-it-yourself cotton candy machine:
Backup video lesson on how to make a cotton candy machine at home:
Do-it-yourself cotton candy making machine
We are pleased to present you the drawings of the device and the technology of preparation of "FESHMAK". It will not take you much time to make the simplest device for its preparation.
Feshmak is a caramel-type product, popularly called "cotton candy", usually in the form of a bundle of elongated thin white threads.
From one kilogram of sugar, up to 80 servings of the finished product are formed.
The simplest design for preparing a feshmak at home with a capacity of approximately 160 servings per hour consists of a 220 V electric motor with a power of 50 to 300 W with a rotor speed of 1250 - 1500 rpm and a disk made of sheet aluminum with a diameter of 170 - 180 mm and a thickness attached to its shaft. 0.2 - 0.3 mm. To make a disk, you can use tin from a herring can. At a distance of 350 - 400 mm from the center of the disk, a fence made of plastic, linoleum, etc. is installed.
Cotton candy homemade
P.
If you seriously decide to start making a feshmak, we recommend using the design shown in fig. 1.
For its manufacture, it is necessary to use materials provided by GOST for the food industry.
Rice. 1
1- electric motor;
2 - working disk;
3 - container from the material recommended by GOST;
4 - sleeve;
5 - rack on wheels (4 pcs.)
Rice. 2
Apparatus for making "feshmak":
1 - electric motor;
2 - electric cord;
3 — a bolt of fastening of a disk;
4 - the resulting layer of cotton candy.
Note.
The design of the apparatus proposed by us reflects only the basic principle of the production of "candy floss", it is elementary and easy to manufacture. If you wish, you yourself can improve the device by mechanizing part of the manual labor.
How to make cotton candy.
First you need to prepare the caramel mass. It is prepared without cooking molasses, which simplifies the cooking process. The mass is not candied due to the formation of invert sugar under the action of vinegar essence added in the middle of cooking. So, in a small amount of water (approximately 3 parts of sand, 1 part of water), granulated sugar is dissolved and boiled for 10 minutes, after which vinegar essence is added (3 ml of essence per 1 kg of sugar) and the mass is again boiled for 10 - 12 minutes. After that, the mass is brought to a very low heat for 25 - 30 minutes. until a strong caramel sample with a moisture content of 1.5 - 1.7% is obtained. Humidity is determined by the boiling point of the mass. At the beginning of the boil, it should be 100 - 105?, and at the end - 135 - 145?. Pour the finished mass, not allowing it to cool, in a thin stream onto the edge of the rotating disk (2 - 4 mm from the edge). To do this, it is convenient to use a small enameled bucket. Hot syrup, breaking into thousands of thin threads, solidifies at room temperature, forming a layer of "cotton wool".
With high humidity of the surrounding air, it is impossible to obtain a high quality product. In this case, you can use the closing of the apparatus with a lid with a hole for filling the caramel mass. Turn off the motor and separate the threads from the body. Cut the finished product along the diameter line and roll the resulting semicircle on the table into a tube. Do the same with the second semicircle. Then cut the "cotton wool" into the desired number of servings. The product must have White color and a pleasant sweet taste. When using food coloring, the product takes on a more attractive appearance.
To maintain the high quality of the “cotton wool”, it is necessary to clean the disk of adhering syrup after each working cycle. Feshmak cannot be stored outdoors for a long time - this is its significant drawback. Sealed packaging and cold will keep it for a day or more.
Do not despair if the quality of the product did not suit you the first time. The main condition for success is the accuracy of each operation.
This material was taken from the site http://freeseller.ru
Cotton candy is quite a tasty delicacy, but the apparatus for its manufacture is very expensive and therefore it is not advisable to purchase it for home use.
However, almost everyone can make a homemade cotton candy machine at home. This will require a simple pan and some accessories that are sure to be found in every pantry. Making a home device will not take much time, and it will cost mere pennies. With a little work, you can make cotton candy from plain sugar at any time and in any quantity.
For the successful operation of the device, you will need a container that will be filled with sugar. This container will be subjected to heat, while the sugar will melt and rotate. When rotating through the holes of the container will be ejected thin threads melted sugar. The container must be placed inside a large pot to contain the ejected filaments.
First you need to pick up everything you need to make the device. This includes accessories and tools.
From the tools prepare:
- Drill and some drills. Be sure to have a thin (no more than one millimeter) drill.
- Soldering iron.
- A set of files.
- Scissors for metal and a can opener.
Device accessories:
- Jet-lighter. Such lighters are characterized by a blue flame and produce heat that exceeds the temperature of conventional lighters. At the same time, no soot is released during combustion. The lighter should be able to burn on its own, this is due to the fact that finding a hand with a lighter in a pan with flying sugar threads is somewhat inconvenient.
- DC electric motor powered by low voltage (for example, nine volts).
- The power source of the electric motor, can be a simple battery.
- A small tin can, preferably tall, from canned vegetables.
- Small cover for lighter installation, milk cover can be used.
- Large pot or bucket.
- A relatively long stick, longer than the width of the pot. Any wooden plank or metal rod will do.
- A rod or tube about fifteen centimeters long.
- Small size bolt, nut and washer.
After completing the configuration, we proceed directly to the manufacture:
1) We fix the lighter.
We prepare the stand for the lighter. Need to wrap the lighter cling film at least two layers. Then mix some epoxy glue, pour it into the milk cap and place the lighter in the cap. After the glue has hardened, it is necessary to remove the lighter and clean it from the film. Removable lighter stand is ready.
2) Installation of the engine and rod.
The engine is connected to the tin can with a short rod or tube. At the ends of the rod, one hole must be drilled. One hole is designed to connect to the motor shaft, so the appropriate drill is selected. After drilling, insert the shaft into the hole and secure it with a drop of superglue. A set screw can also be used to fix the shaft in the hole, but this will require drilling another hole and threading, although it will allow you to remove the motor if necessary. Think for yourself what you like best.
After that, we drill a second hole for attaching the can. The jar will be bolted, so the drill must match its diameter.
Finally, we attach the engine to the transverse bar. This is quite simple to do, drill two holes in the center of the bar and fix the engine with two screws.
3) Installation of the can.
The tin can is the container in which the sugar will be melted. To do this, you need to pour sugar into it, hang it over a fire source and unwind it, while sugar threads will fly out of the holes in its sides.
You should start by cutting a hole along the top edge of the jar. Using a can opener, completely remove the top lid of the jar and file the edges with a file to remove any burrs. This will protect against wounds in the process of making cotton candy.
After that, it is necessary to drill a series of holes on the sides of the can, at its lower edge. The holes should be as small as possible in diameter, even with holes that are one millimeter in diameter, some sugar grains pass through them without having time to melt. Therefore, use the smallest diameter drill you can find. Drill holes at a height of about one centimeter from the bottom seam of the can.
4) Bank fastening
Drill a hole in the jar to attach it to the rod. Secure the jar with a bolt and nut. In principle, the jar can simply be soldered to a metal rod or nailed if the plank is wooden. But the option of fastening with a bolt and nut is better, as it allows you to remove or replace the can.
Pay special attention to the fact that the jar, mounted on a rod, is conveniently located above the source of fire inside the bucket or pan.
Cooking cotton candy
Installation is ready.
Let's start making cotton candy. Light the lighter, place in tin can some sugar and start the engine.
Set the lighter inside the pan. Once the jar is sufficiently warmed up, the sugar will begin to melt and scatter through the holes in the sides of the jar in the form of cotton candy. After the formation of a certain amount of cotton wool, collect it with a bamboo stick.
