How to make a stand for incense sticks. Wonderful incense and incense sticks at home Making an incense stick stand

Recently, the East is in trend. Many began to get involved in oriental medicine, oriental motifs can often be found in the interior. Yoga is popular different kinds therapies, including aromatherapy. If you are fond of aromatherapy, then you have probably used incense sticks. These sticks fill the room with pleasant smells, but smoldering, they crumble on the table or on the floor in the form of ash. To prevent this from happening, incense sticks are installed on a special stand that acts as an ashtray. You can buy a stand for incense sticks or make your own if you want the decor to be original. And in this article we will tell you how to make a stand for incense sticks from polymer or ordinary clay.

Materials:

• clay
• rolling pin
• sheet metal (optional)
• wooden skewer or wire
• spray paint or varnish
• knife or metal molds

Making a stand for incense sticks

Prepare polymer or ordinary clay so that it resembles plasticine in consistency.

Roll out the clay on a hard, flat surface, cut a rectangle out of the resulting layer with a knife. Smooth out the surface of the clay.

Using a small mold, apply a pattern to the surface of the clay.

Using a wooden skewer or wire, poke a hole for the incense stick.

From a strip of metal, make a template with which one edge of the clay rectangle can be bent and fixed until the clay dries. Let the clay dry for 24 hours.

Divide the stand into sectors with masking tape and paint. Top the paint with spray varnish.

When the coating dries, the stand can be used for its intended purpose.

Original article in English.

Recently, the East is in trend. Many began to get involved in oriental medicine, oriental motifs can often be found in the interior. Yoga and various therapies, including aromatherapy, are popular. If you are fond of aromatherapy, then you have probably used incense sticks. These sticks fill the room with pleasant smells, but smoldering, they crumble on the table or on the floor in the form of ash. To prevent this from happening, incense sticks are installed on a special stand that acts as an ashtray. You can buy a stand for incense sticks or make your own if you want the decor to be original. And in this article we will tell you how to make a stand for incense sticks from polymer or ordinary clay.

Materials:

• clay
• rolling pin
• sheet metal (optional)
• wooden skewer or wire
• spray paint or varnish
• knife or metal molds

Making a stand for incense sticks

Prepare polymer or ordinary clay so that it resembles plasticine in consistency.

Roll out the clay on a hard, flat surface, cut a rectangle out of the resulting layer with a knife. Smooth out the surface of the clay.

Using a small mold, apply a pattern to the surface of the clay.

Using a wooden skewer or wire, poke a hole for the incense stick.

From a strip of metal, make a template with which one edge of the clay rectangle can be bent and fixed until the clay dries. Let the clay dry for 24 hours.

original and simple ways creating holders for aroma sticks.

Oriental fragrances can create a soothing and peaceful atmosphere in the house. To feel light and calm, sometimes it is enough just to light incense and relax, inhaling the aroma and watching a thin stream of smoke.

Special stands for placing sticks are sold in stores. But if you do not want to spend money or prefer to create home decor elements with your own hands, then in a few minutes it is quite possible to make a holder yourself from improvised means.

You will need:

- round piece of wood

- hammer,

- a small nail

- a stick of incense.

You can buy a blank of wood in hobby stores or cut it yourself from wood and process it.

Drive in a nail at an angle on one side of the block of wood. No need to drive the nail hard - its purpose is only to make a hole for the sticks.

Then use a hammer to remove the nail. The hole for the aroma sticks is ready! You just have to place the incense and enjoy the smells.

The stand can be painted with special paints, varnished or glued with beads and other decorative elements. Together with a set of incense, this will be a great gift for family and friends.

If you have not found a suitable wooden blank, do not despair. There are many other materials from which you can easily make a similar stand.

Making clay incense stick holder

Ideally, a decorative holder can be molded from clay yourself. At the same time, it can be absolutely any shape, in the form of an animal, a person or a plant. However, in this case, firing is required to obtain a ceramic product. And not everyone has the opportunity to use a muffle furnace. In this case, modern materials will come to the rescue.

So, an excellent material for making a decorative stand will be self-hardening polymer clay. From it you can fashion a beautiful bowl, a statue of a small Buddha or a frog with small holes for aroma sticks. Within a day, polymer clay will dry out and turn almost into stone.

You can also use plastic. This polymer clay needs to be fired, however, in order for the material to harden, 200 degrees is enough, i.e. conventional oven.

Gypsum and salt dough incense holders

The most economical option is to create a coaster from salt dough. The ingredients are in every home, they are inexpensive, and to make an amazing and unique incense accessory, you only need imagination and a little free time.

To make the simplest pebble-shaped stand with small holes for sticks, you will need Wheat flour(1 cup), salt (1 cup), water (0.5 cup).

First, mix salt and water, then add flour and knead until a dense consistency that holds its shape. After that, you can start creating the holder. The finished product after drying should be painted or varnished.

From plaster, you can also pour a pretty stable figure that will hold incense sticks. To do this, just make holes at the top with a toothpick.

In addition, gypsum decorative products can themselves become sources of fragrance if you drop a few drops of your favorite essential oil on them.

The same applies to crafts from the test. It will take quite a bit of time to do. Earlier we wrote how to create such products.

Recently, the East is in trend. Many began to get involved in oriental medicine, oriental motifs can often be found in the interior. Yoga and various therapies, including aromatherapy, are popular. If you are fond of aromatherapy, then you have probably used incense sticks. These sticks fill the room with pleasant smells, but smoldering, they crumble on the table or on the floor in the form of ash. To prevent this from happening, incense sticks are installed on a special stand that acts as an ashtray. You can buy a stand for incense sticks or make your own if you want the decor to be original. And in this article we will tell you how to make a stand for incense sticks from polymer or ordinary clay.

Materials:

• clay
• rolling pin
• sheet metal (optional)
• wooden skewer or wire
• spray paint or varnish
• knife or metal molds

Making a stand for incense sticks

Prepare polymer or ordinary clay so that it resembles plasticine in consistency.

Roll out the clay on a hard, flat surface, cut a rectangle out of the resulting layer with a knife. Smooth out the surface of the clay.

Using a small mold, apply a pattern to the surface of the clay.

Using a wooden skewer or wire, poke a hole for the incense stick.

From a strip of metal, make a template with which one edge of the clay rectangle can be bent and fixed until the clay dries. Let the clay dry for 24 hours.

Divide the stand into sectors with masking tape and paint. Top the paint with spray varnish.

When the coating dries, the stand can be used for its intended purpose.

Original article in English.